5 best paint remover for concrete

Product description

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

From the Manufacturer

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

• Biodegradable formula
• Safe for user, substrate and environment
• Removes multiple layers
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic

User questions & answers

Question:	has anyone use this in a sprayer
Answer:	It can be sprayed. Best to use a commercial sprayer. You will need to remove all the filters and use a .031 tip size.
Question:	how does it do on wood
Answer:	It does very well on wood. Unlike some other environmental strippers like Peel Away 7 it isn't highly alkaline and doesn't require being neutralized, and thus there is no danger of darkening the wood. The #1 choice for wood in my opinion, and I have tried virtually everything. (One tip--cover the stripper with wax paper, plastic, etc. while you let it work so it doesn't dry out. Let it work overnight for maximum effectiveness.)
Question:	How many gallons would be needed for a 26 ft boat with a 10 ft beam
Answer:	I think you would need to ask to buy it by the barrel! We stripped both sides of a standard door and used over a gallon. There were many layers of paint, but you also have to put it on thickly for it to work properly. I would contact the manufacturer for suggestions on stripping a boat.
Question:	does it work on brick which has latex paint on it
Answer:	Yes it works great on stripping latex paint from brick interior or exterior.

Product description

CS Unitec’s EOF 100 paintshaver efficiently and effectively removes up to 5x faster than sander tools on a variety of materials from wood, plaster, concrete, metal and more. The EOF 100 removal tool includes: electronic soft start, ergonomic soft-grip/non-slip handles, and upgraded adjustable dust guard that allows for stripping stably right to the edge of a surface. Precise depth adjustment to 1.0mm for material removal without milling into the substrate. 2 types of replacement carbide milling discs available (Wood/Softer Materials P/N 37124000 For Concrete/Harder Material P/N 37125000). This paint stripper removes varnish, paint, graffiti, resins, coatings, solids, sprays and greasy dirt from wood, plaster, concrete, and other surfaces without unhealthy odors or exposure to hazardous chemicals. Specifications: Weight: 7lbs Load Speed: 10,000 rpm Spindle Connection: M14 male Included Components: 1x EOF 100 Paint Peeler, 1x Case, 1x Assembly Tools.

• The EOF 100 Electric Paint Scraper Is Up to 5x Faster Than Traditional Power Sanders with Less Vibration, Soft Start, and Ergonomic Handles for Increased Operator Comfort.
• This Light-weight , Heavy-Duty Professional Planer Removes Varnish, Paint, Graffiti, Latex, Resins, Coatings, Solids, Greasy Dirt, Sprays & More.
• Tool For Use On Wood, Concrete, Metal, Aircraft, Boats, Decks, Siding, Walls & more. Low Clearance - Mill Right To The Edge.
• Dust Extaction Port For Reducing Exposure to Unhealthy Odors and Hazardous Chemicals (When Used With Dust Extraction Vacuum).
• Milling Head Diameter 4", Depth Adjustment 0.1 mm to 1.0 mm, 7lbs, Replaceable Carbide Milling Discs For Use On Wood/Softer Materials (P/N 37124000) For Concrete/Harder Material (P/N 37125000).

Product description

For those unexpected situations when your property has been damaged due to spray paint or graffiti, finding an effective product is critical for proper removal. The patented formula of Motsenbocker’s Lift Off Spray Paint and Graffiti Remover 411-01 breaks the Molecular Bond for fast, easy removal of spray paint, aerosol paint, high-gloss, semi-gloss, enamel, acrylic, and oil lacquer from street signs, vehicles, buildings, floors, walls, fiberglass, metal, tile, vinyl, brick, plastic, and concrete. This spray paint removal product is safer to use than harsh chemicals such as Methylene Chloride. Lift Off Spray Paint and Graffiti Remover is formulated to safely and easily remove spray paint from multiple surfaces without causing damage to the original surface. It’s a water-based, biodegradable formula that contains low VOC content. In fact, it contains less than half of the regulated VOC limit. It works on soft, hard, or porous surfaces, concrete, stucco, fiberglass, plexiglas, and more. When used correctly, Spray Paint and Graffiti Remover will not melt or dissolve paint. It leaves paint intact and solid for easy and safe clean-up and disposal. Lift Off is Paint Removal Made Easy. The patented, water-based Enviro Science formula is better for the environment, safer for the surface, and safer for people and pets. It’s an exceptional product for the hardworking do-it-yourselfers or professionals who want to get the job done right the first time without using harsh chemicals. Motsenbocker’s Lift Off Spray Paint and Graffiti Remover is made in the USA using high-quality materials and nature-friendly ingredients with precise manufacturing standards.

From the Manufacturer

Motsenbocker's LIFT OFF Spray Paint Graffiti Remover effectively removes all types of oil-based paints, varnishes, lacquers and spray paints from all types of surfaces.

• SPRAY PAINT REMOVAL MADE EASY: Lift Off’s Spray Paint and Graffiti Remover utilizes a patented, water-based formula to easily and safely remove spray paint, semi-gloss, high-gloss, acrylic, enamel paints and more from hard or soft surfaces.
• SAFE FOR EXISTING PAINT SURFACES: Disposing of graffiti paint can be tricky, but Lift Off leaves paint solid and intact for easy and trash safe clean up. Unlike chemical paint removal products, Lift Off Graffiti Remover works its way between the paint and surface to break the molecular bond allowing paint to be removed easily.
• WORKS ON MULTIPLE SURFACES: This spray paint remover works on soft, hard, or porous surfaces, including concrete, stucco, vehicles, plastic, brick, street signs, utility boxes, Plexiglas, and more.
• SAFER ALTERNATIVE TO HARSH CHEMICALS: Using Lift Off Spray Paint Remover is safer than using harsh chemicals like Methylene Chloride and NMP.
• MADE IN THE USA: Not only are Lift Off products made in the USA, they are safer, eco-friendly, and simply work better.
• Includes one 22-ounce trigger spray bottle

User questions & answers

Question:	Will this remove original paint from anodised aluminium without harming the aluminium
Answer:	We did but well ventilated, open area. There is some odor, like all paint. Wouldn't use in a small or windowless space.
Question:	Does this work on cement
Answer:	Yes, and you should also take them off and wash them every time you are done using them to keep them spraying well.
Question:	Does it work on plastic bumpers? Will the ingredients damage it
Answer:	Because it is acrylic (plastic) it may not stick very well
Question:	does it work on brick
Answer:	It's nothing like cyan = shinny blue/green . Cerulean blue hue 6 is like almost flat blue = sandy .

Product description

Multi-Strip ADVANCED is a unique, safe paint remover that is designed to remove up to 15 layers of paint and varnish. A lighter coat will remove 1 to 4 layers quickly while a heavier coat will remove multiple layers over time. It is biodegradable, non-flammable, low odor and contains no Methylene Chloride, NMP or Caustic. It can be brushed, rolled or sprayed on with an airless paint sprayer. Multi-Strip removes most varieties of paints and varnishes which are oil or water-based. Unlike other removers it can remove more difficult coatings such as two part epoxy and urethanes. Multi-Strip ADVANCED works on interior and exterior surfaces.

From the Manufacturer

Founded in 1893, Sunnyside Corporation manufactures paint solvents, safer paint removers, paint additives and cleaners for home center, hardware and paint retailers nationwide. Quality has been our hallmark for over 125 years. Under the fourth generation of family leadership, Sunnyside has provided trusted home improvement products for the professional and the do-it yourselfer. “Innovative Products for Today and Tomorrow.”

• Safer professional paint and varnish remover; formulated with no methylene chloride or NMP
• Capable of removing up to 15 layers of paint, varnish, stain, lacquer and urethane; begins working in 30 minutes
• Apply a light coat to remove 1-4 layers; a heavier coat will remove multiple layers with a stripping tool
• Apply with a brush, medium sized nap paint roller, or putty knife. Case Height-5.38 inch. Case Depth-10.19 inch. Case Width-15.44 inch
• Will adhere to vertical surfaces; use on interior or exterior surfaces including wood, plaster, concrete, brick, stone, masonry, marble, metal and veneers

User questions & answers

Question:	Is this safe for carbon fiber
Answer:	The container only states don't use on plastic, linoleum, rubber or sheet rock/ plaster. I'm using it for wood, glass and formica countertops. Hope this helps. You may need to email the company for the best information. Cheers Michael
Question:	Will this work on a wood garage door to remove marine polyurethane
Answer:	we have used it on wood to remove almost everything except marine grade. We even used it on brass so making a guess it might
Question:	Is this stripper safe to use to remove paint from a fiberglass boat
Answer:	Pettit Paint Bio-Blast Bottom Paint Remover PET-9051G
Question:	Can you stain the wood after using this
Answer:	Yes, but make sure you clean the wood surface using "Mineral Sprits" and the give it a full 24 hours to dry then apply the stain

Product features

Brush, Roll, Spread or Spray On

• A lighter coat will remove 1-4 layers
• Apply liberally and remove up to 15 layers of paint and varnish
• Professional formula works on more difficult coatings such as two-part epoxy and urethanes

Give it Time to Work

• Starts working in 30 minutes
• Usually removes 8-15 layers in 24 hours
• Test scrape an area to see if all layers have been removed from surface
• If desired result isn't achieved, apply more and let it work longer

Scrape Away

PRO TIP: Mist the surface with water prior to actual removal. It makes lifting the layers easier.

• Flat surfaces - use a stiff putty knife to lift paint
• Detailed surfaces - use a stiff bristle brush to lift paint
• Remove any leftover residue using a nylon brush or stripping pad
• Clean-up is easy with water
• Let completely dry before painting

Product description

The Smart Strip Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior/exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.

From the Manufacturer

The Smart Strip™ Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior / exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.

• This product adds a great value
• Safe for user, substrate and environment
• Removes multiple layers
• Does not contain methylene chloride, any caustics, or toxic chemicals. It is odor-free and safe for the environment
• This paint stripper is exceptional for the safe removal of lead-based paint and is excellent for intricate, carved, or molded surfaces
• It is also outstanding for removing marine paints without damaging the gel coat
• Because it is a paste, the Smart Strip Advanced Paint Remover paint stripper can easily be applied by brush, roller or conventional airless sprayer

User questions & answers

Question:	has anyone use this in a sprayer
Answer:	I believe it is 90% Perchloroethylene. So, no it is not ammonia based. http://docs.crcindustries.com/msds/5090.pdf
Question:	how does it do on wood
Answer:	The red gallon is the more EPA-sensitive chlorinated version, the only size of it available in NJ. Only the green non-chlorinated formula is available here in the aerosol-spray size.
Question:	How many gallons would be needed for a 26 ft boat with a 10 ft beam
Answer:	I bought this before. It is only 1 container, which is one gallon size.If it was a case of 4 containers it would be a steal at that price
Question:	does it work on brick which has latex paint on it
Answer:	NO, this CRC 05090 product is not safe to use for cleaning before welding, heating or exposing to a flame. This product is a chlorinated solvent, Tetrachloroethylene aka Perchloroethylene and even when apparently dry rapidly decomposes into Hydrogen Chloride and/or Phosgene gas/vapor (chemical warfare weapons agents) when exposed to heat and/or flame, which are highly corrosive, toxic, damaging to human tissue, health and can be fatal.