14 best garage floor epoxy coating

Product description

Rust-Oleum EPOXYSHIELD Garage Floor Coating Kit is a durable floor finishing solution that easily covers surfaces in one coat. EPOXYSHIELD works on interior concrete surfaces including garages, workshops, basements and more. Resists hot tire pick-up, cracking and peeling while protecting against stains from gasoline, antifreeze, motor oil and other chemicals. Following application, surface is ready for foot traffic in 24 hours and vehicle traffic after 3 days.

From the Manufacturer

Rust-Oleum EPOXYSHIELD Garage Floor Coating creates showroom-quality surfaces. Protects against gasoline, antifreeze, motor oil, salt and hot tire pick-up. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

• Durable, 2-part epoxy formula works on interior concrete surfaces such as garage floors, workshops, basements and more
• Professional looking finish is easy to clean and provides long lasting protection against stains and chemicals.Indoor use only
• Walk on ready in 24 hours, vehicle and drive-on ready in 72 hours ; 5X stronger than 1-part floor paint
• Super adhesion on surfaces and coverage up to 500 sq ft
• Semi-gloss finish provides a subtle shine on surfaces(refer user manual for better finish and additives required)

User questions & answers

Question:	Can I use this on a front porch that is concrete but previously painted? The existing paint is perling
Answer:	You mean peeling,no this product is for garage floors out of the sun, you’re going to have to scrape off all the loose paint, clean it real good and then they have exterior concrete primers for that you’re going to need and then the best patio paint they have two coats of the paint.
Question:	Do i need to buy concrere etch separately
Answer:	Acid etch is included in the kit. If your garage floor has oil stains, make sure you buy some degreaser and use it prior to etching.
Question:	Has anyone applied this paint over a cement garage floor with a sealer coating without doing all the recommended acid treatment. How did it turnout
Answer:	Not well. My contractor said he didn't need to do anything but scrub. But I did an acid wash the day prior, though probably not a perfect job. I stayed off for a week. Still peeled off where the tires sat.
Question:	Is this floor slick when it is dry
Answer:	It can be if it's not relatively clean. I've accidentally let some WD40 overspray get on the floor, and then later almost slipped and fell on my head! So - yes, certain spills can make it slippery. HOWEVER - it is NOT slippery if the surface is dry and relatively clean. Heck, WD40 or oil spills can make anything slippery. Just use your head and don't land on it! This coating is awesome - mine has been perfect for about 13 years now.

Product features

Rust-Oleum EpoxyShield Garage Floor Kit

Rust-Oleum EpoxyShield Garage Floor Kit transforms your dull garage or other concrete floor into a glossy, showroom-quality finish. Durable epoxy paint coating applies in one coat and lasts for years.

Painting Concrete with EpoxyShield

Allow new concrete to cure a minimum of 28 days.

Apply when temperature range is 60 to 85 degrees.

Wait 24 hours after coating for light foot traffic.

Wait 3 days after coating for vehicle traffic.

Conduct a moisture test before applying coating

Apply 2x2 sheet of plastic to concrete taping edges down. Wait 72 hours and check for water droplets or evidence of moisture. Wait 72 hours and test again. If moisture is present, use RockSolid Moisture Stop before floor application.

Mix Part A & B for 3 minutes, and apply within 1-2 hours of mixing

Always read instructions completely before starting any application.

Before

Garage Floor & Garage Concrete.

After

Garage Floor & Garage Concrete.

Durable Protection

No Hot Tire Pickup.

Concrete Transformed

Basement Floor & Basement Concrete.

Product description

Rust-Oleum rocksolid polycuramine 2.5 car garage floor kit offers unsurpassed durability. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Zero VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic. Offers quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours. Optimal application temperature 40˚-90˚F

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique eco-friendly burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 500 sq. Ft. Depending upon surface porosity
• Provides a terrazzo flooring look in a high-gloss finish that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Can you put this over wood
Answer:	No. This product is made in south Korea.
Question:	How is it different from rust oleum expoxyshield
Answer:	Yes this glue is for individual eyelash extensions. "NOT FOR CLUSTER OR STRIP LASHES!" FOR EXPERIENCED PROFESSIONAL USE ONLY!
Question:	can i use epoxy roller on this
Answer:	I don’t see why not, it took off industrial glue from my lashes.
Question:	I can feel hard items inside of the bag. What is in there
Answer:	Yes, it’ll take it off but be warned, it could take off the other lashes as well. I used it to take all of mine off & it was off within seconds!!

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Rust-Oleum RockSolid Polycuramine 2.5 Car Garage Floor Coating Kit offers unsurpassed durability. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Zero VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic. Offers quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique eco-friendly burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 500 sq. ft. depending upon surface porosity; no hot tire pickup
• Provides a terrazzo flooring look in a high-gloss finish that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	does this work on osb floors in a workshop
Answer:	It's pretty sticky stuff, but not sure how well it would hold up compared to concrete.
Question:	Is everything you need included in the box
Answer:	Have used both. This seems MUCH more durable. Definitely worth the price difference

Product description

Rust-Oleum rocksolid polycuramine 2.5 car garage floor kit offers unsurpassed durability. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Zero VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic. Offers quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique eco-friendly burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 500 sq. Ft. Depending upon surface porosity. No hot tire pickup
• Provides a terrazzo flooring look in a high-gloss finish that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Hello. i have a different color of the same product already applied 2 years ago. can i apply the same product but a different color right in top of it
Answer:	Definitely not, you should remove the caulk completely then using a hand held sander go over the areas were the caulk was, then using hydraulic cement fill in the cracks and with a trowel smooth them over. If the floor was never etched etch the entire area to be finished, before you use the hydraulic cement.
Question:	Can i use this over the rustoleum epoxy shield i put down 8 years ago
Answer:	Unknown about the CONTENT. . simply follow the directions. . .use some common sense and plenty of ventilation.
Question:	Can this go directly over a painted garage floor after i use the "cleaner/etcher" from rust-oleum
Answer:	check out this link and yes it would be best if you rent a floor sander with a Medium Grit do the whole floor lightly, this will insure proper adhesion, if you notice any of the previous finish breaking,popping up use a scraper and then sand feathering it to the old finish then use a suitable rusto-oelum primer specifically for use with this product. If you can give me you Zip Code perhaps I can lower the price if the shipping is much less then anticipated. https://www.rustoleum.com/homeowner/faqs/epoxyshield-garage-floor-coating-faqs/?page=2
Question:	Minimum temperature of aplication
Answer:	I've done 2 garage floors, 4 years apart. First time it came with cans you had to mix but the one I did this year came with pouches. Pouches worked better, press hard and center divider opens and then knead until it is mixed. Cut off a corner and pour into the paint tray.

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Rust-Oleum EPOXY Shield Professional Floor Coating strengthens and protects shops and other commercial concrete surfaces. Apply for excellent wear, impact and abrasion resistance to heavy foot and vehicle traffic. Kit includes 2-part solvent-based epoxy coating, Decorative Color Chips and detailed instructions.

From the Manufacturer

Rust-Oleum EPOXY Shield Professional Floor Coating strengthens and protects shops and other commercial concrete surfaces. Apply for excellent wear, impact and abrasion resistance to heavy foot and vehicle traffic. Kit includes 2-part solvent-based epoxy coating, Decorative Color Chips and detailed instructions.

• High solids solvents based epoxy coating ideal for garage floors, basements, workshops, etc
• Provides superior resistance to chemicals, wear and even standing water
• Covers up to 200 sq feet per gallon and is ready for heavy foot traffic in 1 day, vehicle ready in 4 days
• Ultimate adhesion and durability, withstands heavy foot and vehicle traffic
• Semi-gloss finish, solid base color and decorative chips can be added

User questions & answers

Question:	Can this be applied during March in Oklahoma? I’m building a new home and that’s the estimated time of completion
Answer:	Yes I used it on mine. It worked great.
Question:	The box in the pic says chemical resistant, but nowhere in the ad. What is your experience
Answer:	Yes
Question:	Does this kit include etching or do you buy that separate
Answer:	Depending on how you use it, For best results, apply 2 coats, allowing 1-2 minutes between coats. Remove any overspray from the auto finish immediately. Allow 72 hours for full cure before placing objects in the truck bed. Roll out coating evenly across the surface.
Question:	I have got a 3 car garage approx 800 SQ FT. How many kits do I need
Answer:	Rust-Oleum RockSolid Clear Topcoat is designed to be applied directly over RockSolid Garage Floor Coatings and RockSolid Metallic Floor Coatings, or it can also be used on bare concrete. RockSolid Clear Topcoat can be applied after 8-12 hours (ensure Garage Floor coating is not tacky) and within 7 days of applying RockSolid Garage or Metallic Floor coating. If more than 7 days has passed, sand the surface with 60-80 grit sandpaper before applying the second coat. Please keep in mind some types of concrete are more porous than others and will absorb more paint, and for this reason, all of our coverage rates are approximate. if there is anything else i can help you with please let me know, Stay safe :)

Product description

Rust-Oleum RockSolid Metallic Garage Floor Coating Kit is made from a unique polycuramine formula that provides a tough, ultra hard coating on properly prepared interior concrete floors including garages, basements, workshops and any other interior concrete within the home. Resistant to salt, oil, gas and other harsh chemicals, this coating bonds to concrete and provides a unique, shimmery high-gloss finish on floors. Strong enough to hold up in the most demanding, high use areas yet the ultra low odor and low VOC make it safe to use on any interior space. Provides quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.FOR BEST RESULTS: Install between 40˚-90˚F

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique eco-friendly burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 125 sq. ft. depending upon surface porosity; clean up with mineral spirits
• Extreme high-gloss finish in a shimmery metallic color resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Should I use a primer on the floor and what kind
Answer:	yes
Question:	How much darker is the gunmetal compared to the silver bullet
Answer:	sliver car compared to charcoal gray car
Question:	If I order two cans and only use one can I return the other unopened one
Answer:	Sure, that's what I always do, overbuy so I don't run out of product during installation, and simply return to store/amazon, especially if unopened.
Question:	Can i put glitter in it
Answer:	Although I'm sure glitter isn't the design intent and keep in mind you may void any warranty, I don't see why not. Pick the finest glitter you can find to ensure it mixes well and mix thourouly.

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Rust-Oleum RockSolid Polycuramine 1 Car Garage Floor Coating Kit offers unsurpassed durability. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Zero VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic. Offers quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 250 sq. ft. depending upon surface porosity; no hot tire pickup
• Provides a terrazzo flooring look in a high-gloss finish that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Does this kit come with the clear coat sealent
Answer:	Yes. it has a mild adhesive tape that hold well but allows you to remove or rest the wraps position.
Question:	What color are the chips? and if white, is red white and blue available
Answer:	Each roll (of two) is about 80" long, so about 160" total. (lucky for you my son hasn't gotten around to this!)
Question:	Is this product hazard material can be ship.by comercial flight
Answer:	two rolls and very good
Question:	Hello. i have a different color of the same product already applied 2 years ago. can i apply the same product but a different color right in top of it
Answer:	One package was enough for my drop bars.

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Rust-Oleum EPOXYSHIELD Garage Floor Coating creates showroom-quality surfaces. Ultra durable coating provides an attractive high-gloss finish that resists wear and tear to keep floors looking their best for years. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

From the Manufacturer

Rust-Oleum Epoxy Shield Garage Floor Coating creates showroom-quality surfaces. Protects against gasoline, antifreeze, motor oil, salt and hot tire pick-up. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

• Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more
• Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint
• Walk on ready in 24 hours, vehicle and drive-on ready in 3 days
• Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt
• Low odor, low VOC gloss finish provides a show room shine
• Indoor use only
• Cleans up with soap and water

User questions & answers

Question:	Can you put another application of paint right over the current one in a few years
Answer:	Level the trailer. Front to back and left to right. Then stick them on, making sure that the bubble is dead center. They're junk. One of mine failed already.
Question:	What if there are cracks in the concrete
Answer:	So inexpensive, I would simply order another pair...
Question:	I have tile glued on my cement basement floor, must i pick up the tile? And the glue too? To use this product
Answer:	no
Question:	Hello. Is it necessary to top coat with Rustoleum premium clear coating? Thanks
Answer:	The backing plat is 3.75"x1.375" and the actual level indicator is 3" long.

Product features

Rust-Oleum EpoxyShield Garage Floor Kit

Rust-Oleum EpoxyShield Garage Floor Kit transforms your dull garage or other concrete floor into a glossy, showroom-quality finish. Durable epoxy paint coating applies in one coat and lasts for years.

Painting Concrete with EpoxyShield

Allow new concrete to cure a minimum of 28 days.

Apply when temperature range is 60 to 85 degrees.

Wait 24 hours after coating for light foot traffic.

Wait 3 days after coating for vehicle traffic.

Conduct a moisture test before applying coating

Apply 2x2 sheet of plastic to concrete taping edges down. Wait 72 hours and check for water droplets or evidence of moisture. Wait 72 hours and test again. If moisture is present, use RockSolid Moisture Stop before floor application.

Mix Part A & B for 3 minutes, and apply within 1-2 hours of mixing

Always read instructions completely before starting any application.

Before

Garage Floor & Garage Concrete.

After

Garage Floor & Garage Concrete.

Product description

Garage FX Epoxy Floor Coating 1/8” Saddle Tan flake covers Up to 1,100 Sq. Ft.

• Garage FX Epoxy Floor Coating 1/8” Saddle Tan flake covers Up to 1,100 Sq. Ft.

Product description

Rust-Oleum Rock-solid Pearlescent Floor Coating Kit creates the ultimate shiny floor with the look of high end quartz or granite in your garage or interior living spaces. Revolutionary formula provides excellent hardness, adhesion and durability for a long lasting finish with superior chemical resistance. Zero VOC and low odor coating allows for an environmental safe transformation with a no peel guarantee and no hot tire pickup.

• Durable, concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 250 sq. ft. depending upon surface porosity; clean up with mineral spirits
• Extreme high-gloss finish offers a pearlescent shine that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Can you mix bags together to get a consistent color
Answer:	I didn’t try that 1 bad at a time
Question:	Can you mix to pearlescent colors to get a swirl effect? Use one as a base then the other as an accent color
Answer:	Yes
Question:	Will this material stick to wood? I’m wanting to use this on top of plywood for a countertop
Answer:	Yes
Question:	Is this suitable for refinishing cement countertop
Answer:	It’s not food safe.

Product features

Rust-Oleum 306325 Rock-Solid Pearlescent Garage Floor Coating Kit, Pearl Black

RockSolid Pearlescent Floor Coating Kit is designed to create the appearance of high end quartz or granite. This system provides excellent hardness, adhesion and durability on properly prepared concrete. It has excellent resistance to salt, oil, gasoline and other harsh chemicals. This coating contains no VOCs.

• Drive on 24 Hours
• No Hot Tire Pickup
• Chemical Resistant
• Low odor & VOC Free
• No Peel
• Extreme High Gloss
• Kit covers up to 200-250 Sq. Ft.
• Available in 6 Colors
• Optimal application temperature 40˚-90˚F

Product description

Rust-Oleum Concrete Saver EASYCLEAR Epoxy Maintenance Floor Coating Kit adds durability and shine to your floor. This high-gloss finish applies easily to bare or coated concrete - providing great flow and leveling and a generous working time. This coating is VOC compliant nationwide and is ideal mild to moderate industrial or commercial environments such as for new, old, bare or previously coated concrete floors - great for showrooms, garages, etc. Product comes in a 2 gallon kit. 1 per case. Made in the USA.

• Great top coat over other concrete floor coatings
• Excellent resistance to abrasion and chemicals; easy to maintain; low VOCs
• For mild to moderate industrial or commercial environments; interior/exterior use
• For new, old, bare or previously coated concrete floors, great for showrooms, garages, etc.
• VOC-compliant nationwide, made in the USA

User questions & answers

Question:	I sandblasted a logo into a cincrete floor. Could i use this to protect the logo and also be able to see the logo clearly after the apoxy is applied
Answer:	There is no bit, use the ones included in the Dremel tool. And this IS the attachment itself.
Question:	Can this product be used as a top coat for the epoxyshield garage floor coating
Answer:	Thank you for contacting Dremel, The Grout Removal Attachment #568 fits Dremel models: 4300, 4200, 4000, 400, 3000, 300, 398, 395, 200, 285, 8220, 8200, 8100, 800 Adrian Customer Experience Support 800-437-3635
Question:	How many gallons per order ? Title says 1 gallon, Description says 2 gallon kit, picture shows 80 oz
Answer:	yes
Question:	will this product stop hot tire pick up from a garage floor that has epoxy paint
Answer:	YES IT IS. I also have a Dremel Model 4000, and use the attachment successfully. The carbide bit that comes with this unit is a bit small for most tile grout removal jobs. So I bought the next bigger size bit and it works better for me. The guide keeps you in the groove while cutting, and keeps you from cutting too deep into the grout. I'd recommend it.

Product description

Over Armor offers an innovative, waterproofing solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin surface. This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete. Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks. Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish. This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon. Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application. Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• Over Armor offers an innovative solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin formula.
• This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete.
• Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks.
• Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish.
• This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon.
• Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application.
• Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	How can i make the gray lighter
Answer:	You can't, without changing its function. Use the Kilz Deck Paint for a lighter gray. You might contact Kilz to see if you can mix the two. I thought about that, but Over Armor is like dry wall mud, while the Deck Paint is like paint.
Question:	Would this be good for a garage floor
Answer:	This is not designed for drivable surfaces.
Question:	Will this work on an outdoor deck that is exterior plywood
Answer:	I painted a porch this past summer with two gallons of the Redwood colored product. The porch was made of exterior plywood. I used up more of the product on filling in some of the knot holes but the traction afterwards was fantastic and the look very consistent. Two coats would have been best! I recommend fully for this application.
Question:	Would this work on a boat floor
Answer:	Hello, This isn't a marine-grade product and therefore has not been tested for this kind of application. We wouldn't recommend using it on a boat because we haven't tested it properly and can't guarantee it would hold up.

Product features

Transforms & Protects

Revives wood and composite decks, porches and boat docks as well as concrete pool decks, patios and sidewalks. Covers up to 75 sq. ft. in two coats. Two coats are required.

Easy to Apply & Clean Up

Spatter resistant application and easy soap and water clean up. Recoat after 4-6 hours. Allow 24-48 hours before foot traffic, 72 hours to full cure.

Resists Cracking & Peeling

Covers splinters and cracks up to 1/4". Provides a durable, mildew-resistant finish once cured. Not for drivable surfaces like driveways and garages.

Surface Prep is a Must

Coated wood and concrete must be cleaned and stripped. Clean uncoated wood and etch uncoated concrete before applying to promote adhesion.

Product description

Rust-Oleum EpoxyShield Premium Series Clear Floor Coating Kit adds a high-gloss protective finish to coated or bare interior concrete surfaces. Two-component, 100% solids epoxy coating resists hot tire pick up, chemicals and cracking. Kit contains burst pouch technology, anti-skid additive and detailed instructions.

• Low odor, low VOC formula is ideal for use on interior coated or bare concrete surfaces including garages, basements, workshops and more
• Two part, 100% solids epoxy coating provides excellent adhesion, durability, chemical resistance and resists hot tire pick up
• Each kit covers up to 500 sq. ft. on painted surfaces, 250 sq. ft. on bare concrete
• Heavy duty coating is walk ready in 24 hours, vehicle ready in 72 hours and comes in an easy to use burst pouch that reduces waste
• High-gloss protective finish provides a show room quality floor that lasts

User questions & answers

Question:	Can this epoxy be used to re-coat a stone floor
Answer:	The kit includes rubber rollers
Question:	Because of my poor planning, i only bought one kit for 440 sq ft. can i apply another coat after the 5 days for more consistent shine? any tips
Answer:	Which bag? The flakes or the white etcher?
Question:	How much area can this cover
Answer:	Hello, thank you for your question. Yes, the Maeline Bulk Earbuds with 3.5 mm Headphone Plug are compatible with any and all devices with a 3.5 mm headphone jack such as Apple iPhone Models, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE, iPhone 5s, iPhone 5c, iPhone 5, iPad Models, iPad Air (3rd Generation), iPad mini (5th Generation), iPad Pro 10.5-inch, iPad (6th Generation), iPad (5th Generation), iPad Pro 12.9-inch (2nd Generation), iPad Pro 12.9-inch (1st Generation), iPad Pro 9.7-inch, iPad mini 4, iPad mini 3, iPad mini 2, iPad mini (1st Generation), iPad Air 2, iPad Air (1st Generation), Mac Models, 12-inch MacBook, 13-inch MacBook Air with Retina display, 13-inch MacBook Air, 11-inch MacBook Air, 13-inch MacBook Pro - Thunderbolt 3 (USB-C), 13-inch MacBook Pro, 15-inch MacBook Pro - Thunderbolt 3 (USB-C), 15-inch MacBook Pro, 21.5-inch iMac - Thunderbolt 3 (USB-C), 21.5-inch iMac - Thunderbolt 2, 27-inch iMac - Thunderbolt 3 (USB-C), 27-inch iMac - Thunderbolt 2, iMac Pro, Mac Pro, Mac mini - Thunderbolt 3 (USB-C), Mac mini, iPod Models, iPod touch (7th generation), iPod touch (6th Generation), iPod touch (5th Generation), iPod nano (7th Generation) and iPod shuffle (4th Generation).
Question:	I just painted my garage floor with Rustoleum Epoxy with color chips. I want to add the clear, how much time can I wait before the new clear coat
Answer:	Yes, and any device with a headphone jack.

Product description

Rust-Oleum Decorative Color Chips offer ultimate personalization to concrete floor coatings in a variety of colors and blends. Mix and match any combination of color chips with any one-part or two-part concrete floor coating during application. Apply in 4' x 4' sections over wet paint in a standard chip or heavy chip pattern depending on desired coverage. For a high gloss, showroom quality finish, topcoat garage floors with EpoxyShield Premium Series Clear Finish or RockSolid Clear Topcoat.

• Customize any concrete coating with decorative color for the perfect finish
• Universal chips designed for use with one-part or two-part concrete floor coatings
• Mix and match chip blends for a personalized look and color scheme
• Helps hide surface imperfections and dirt for a premium, showroom finish
• Sprinkle onto wet paint during application for a permanent bond

User questions & answers

Question:	Can this be used with a clear coat finish
Answer:	As long as you apply the chips before the clear coat, I don't see why not.
Question:	I have a garage that is 400 square feet. How much do I need
Answer:	Depends on how much flake appearance you want? I like a lot of flake personally. I bought two lbs on top of what comes with the three floor kits. I ended up using only two kits worth of epoxy, and all five bags of flakes on a 900+sqft garage.
Question:	Can you use the Rustoleum Anti-Skid along with these
Answer:	I used the anti-skid after the chips and it did great. I didn't mix the anti-skid in the paint as suggested, I put it on top with the chips and it works great,
Question:	I have a counter top pait set that I'm going to be using to paint my bathrooms. Could I mix this in with that to add some sparkle to my counter tops
Answer:	Yea you can use it with about anything try it on a small piece see if you like it.. I just used in in my garage floor