10 best anvil pool paints

Product description

Waterborne Swimming Pool Paint is a low-VOC coating that dries quickly for recoating, and withstands continuous submersion in fresh or salt water. Use Waterborne Swimming Pool Paint over most types of properly prepared existing pool paints, as well as bare concrete or plaster, marcite, gunite, and other masonry surfaces in sound condition.

• Ocean Blue Waterborne acrylic emulsion swimming pool paint.
• Use with fresh or saltwater swimming pools.
• Quick-drying acrylic swimming pool paint.
• Lasting color and protection in black, white, aquamarine, royal blue, and ocean blue pool paint.
• Can be applied over most types of properly prepared existing pool paints.
• Ideal for bare concrete, marcite, gunite & pools made of other masonry.
• Before painting, review the INSL-X Waterborne Pool Painting Guide for proper preparation and application tips.

User questions & answers

Product features

In The Swim Patio and Deck Paint

In The Swim Patio and Deck Paint is a water-based acrylic non-slip concrete deck coating. Patio and Deck Paint can be applied to damp surfaces, cutting the time between site preparation and roller painting. First time applications will require a minimum two coats depending on surface porosity. Patio and Deck Paint should be applied with a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller cover on rougher surfaces. Coverage: 90 - 125 sq ft per gallon on average. If the outside ambient air temperature if above 80°F, wait 4 hours between coats. Curing time: Before foot traffic is 24 - 48 hours depending on the outside ambient air temperature.

Determine Area Size

Determining the square foot of the area you are coating is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account when deciding how much paint to purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the coating you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires a single or multiple coats and if it needs a primer.

Prepare the Surface

When preparing a surface for a coating of any kind it is important to clean the area. Start by sweeping, scraping, and scrubbing the area removing any loose debris. Then hose and scrub the surface with tri-sodium phosphate 10% solution. The solution will degrease and rid the surface of any unwanted contaminants. We suggest on smooth surfaces to do a light acid wash to etch the surface. The etching will allow the paint to adhere to the surface firmly. Hose and scrub the area again with the tri-sodium phosphate 10% solution. Hose completely clean. This will remove additional debris and neutralize the acid. Allow the surface to dry with no puddles or standing water.

First and Second Coats

In The Swim Patio and Deck Paint should be applied to a damp surface with no standing water. Use a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller on rough surfaces. Roll on the first coat of paint allow a minimum of 4 hours before starting the second coat. After the 4 hour wait you are clear to roll the second coat. Wait 24 - 48 hour before the area can take heavy traffic. Coverage: 90 - 125 sq ft per gallon on average.

• Designed to be used as an upgrade for previously painted rubber-base finishes
• Self Priming two coats suggested for initial application
• Yielding a 3 year average life
• Applied with a paint roller
• Coverage : 250 square feet per gallon on average

User questions & answers

Product features

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

Product description

Mopar Anvil Touch Up Paint - 68183817AB

• Genuine Mopar Anvil Touch Up Paint
• Paint Code PDS
• 4-in-1 Paint Tube
• Mopar Anvil Touch Up Paint - 68183817AB - Part#68183817AB
• Anvil

User questions & answers

Product description

Epoxy pool coatings have proven to be the most effective long-range protection available for concrete pool finishes. The Zeron system is the longest lasting epoxy pool coating available. The Zeron system only requires one coat and will last up to 8 years of service from one application. Features: Premium grade One Coat Epoxy pool coatings Attractive and economically priced Easy do-it-yourself application with paint roller Specifications: One coat process Covers approx 125 to 150 sq. ft. per gallon. High Gloss finish Will stay brighter and easier to keep clean than plaster. Use this quick formula to calculate how much paint you'll need for your pool. Rectangular and Oval Pools:L x W x 1.65 = total square ft. Lazy "L" pools: L x W x 1.5 = total square ft. Free form pools: L x W x 1.6 = total square ft.

• Save Hundreds - DO IT YOURSELF!
• Premium-Grade One Coat Epoxy pool coating
• Lasts up to 8 years

User questions & answers

Product description

Olympic Zeron Epoxy Pool Paint, 1 Gallon, Bikini Blue

• High Gloss Finish
• Alternative to Plaster
• Longest Lasting
• Coverage: Approximately 125 - 150 square feet per gallon.
• This coating may be applied by roller or airless spray equipment.

User questions & answers

Product description

ColorRite has been manufacturing the highest quality touch-up paint available for over 25 years, and take pride in providing the fastest shipping in the industry. Our products are designed for a superior color match and protection against the elements. We guarantee that our paint will match the ORIGINAL color of your Jeep Cherokee. Performing a "spray-out" (a test application of the color on something other than your intended part) is critical to ensure that the color matches and you're applying coats as the paint requires. If your color is what is referred to as a "TriCoat" color, you have a color that requires two different colors to create the "match." Typically, one is the color, and the other is the pearl effect. ColorRite is committed to your achieving results, staffing a dedicated team of specialists to support you. Our experienced team is committed and ready to help you achieve the best results possible. ColorRite - delivering quality for over 25 years.

• Color+Clearcoat package includes two 11 oz. Aerosol cans (factory-matched color plus clearcoat) for a long-lasting, durable finish. See menu above for more package options.
• Touch-up paint designed specifically by ColorRite for the Jeep Cherokee. Please confirm that your vehicle's color code is PDS/LDS (2014) Anvil before ordering.
• ColorRite aerosol paints are ideal for larger areas - around 4 square feet depending on the color - darker colors require more paint than lighter colors.
• Available sizes include: Touch-up pens and 1/2 oz. jars are ideal for small nicks or chips. 2 oz. bottles provide more paint for larger areas (under 3 feet). Aerosols are convenient for those who do not have professional spray equipment. And for the best results and larger areas, our professional sizes are designed to be used with a spray gun.
• ColorRite has been manufacturing high quality paints for over 25 years. Achieve results the very first time - choose ColorRite.

User questions & answers

• The Color + Clearcoat Package includes two 1/2-oz. touch-up jars (factory-matched color, plus high-quality clearcoat) for a long-lasting durable finish. See menu above for more package options.
• Formulated using low-VOC urethane means our paint repair jars are complaint in 50-states, with minimal environmental impact.
• Touch-up paint designed specifically by ExpressPaint for the Jeep Wrangler. Please confirm that your vehicle's color code is PDS/LDS (2013) Anvil Clearcoat before ordering.
• Express Paint 1/2 oz. Touch-Up Jars are an alternative to our popular paint pens. Some people prefer a brush to fix small nicks and scratches, and the jar will cover a larger area than a pen.

User questions & answers

• 2WayPen by ExpressPaint combines two paint repair pens into one cost-effective solution for small touch-up jobs. One side of the 2WayPen is your factory-matched color; the other side contains high-quality clearcoat.
• This includes factory-matched color and high quality clearcoat in one 2WayPen.
• Formulated using low-VOC urethane means our 2WayPen paint repair pens are 50-state compliant, with minimal environmental impact.
• Touch-up paint designed specifically by ExpressPaint for the Jeep Wrangler. Please confirm that your vehicle's color code is PDS/LDS (2013-2014) Anvil before ordering.
• 2WayPen touch-up pens are the easiest and best way to repair small nicks and scratches. If you have a stone chip, small nick, or fairly small scratch, the pen is ideal. It has a "chiseled nib" style tip with two edges; a thin edge for hairline scratches, and a wide edge for larger scratches.

User questions & answers

Product description

Exact match–guaranteed, from custom blends to hundreds of thousands of factory matched colors. Professional results–no experience required. Durable accrylic urethane finish. Perfect for small touch ups, rock chips and scratches. It is easy to apply and fast drying. Specially formulated, super glossy urethane formula comes with micro-fine brush for precision touch up application. Our Colors are never reduced or watered down. We only sell quality paints mixed in the USA.

• All of our touch up paints are made in USA and custom mixed in house to ensure a match to your car.
• Custom computer mixed precision paint colors
• Easy to apply and fast drying, Durable accrylic urethane finish
• Perfect for small touch ups, rock chips, scratches.
• Half ounce container complete with touch up paint and Half ounce of Clearcoat with brush and instructions.