13 best wood deck sealant

Product description

Olympic maximum Clear waterproofing sealant is olympic station's best sealant. In fact, it has been rated the #1 Clear sealant for three years in a row by a leading consumer magazine. Why does olympic maximum rate so highly well, it delivers enhanced waterproofing and sunblock UV defense to strengthen, protect, and condition wood fibers, ensuring the wood's natural beauty lasts. Olympic maximum with weather-ready application is also specifically formulated to allow you to stain when you want, not when the weather dictates all while getting the same excellent results. Weather-ready application provides four great benefits: you can clean and stain your wood on the same day - even after rain.The stain is rain-ready after just 8 hours.the stain can be applied when air and surface temperatures are as low as 35 Degrees Fahrenheit.If the surface is too hot to touch, lightly mist the surface before application of the stain. Olympic - America's most trusted brand since 1938. Olympic - exterior wood stain for decks & more.

• Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water

User questions & answers

Question:	Title says 3 gl, options offers 5 gl. i click on 5 gl to the order but the order form shows 3 gl. so am i getting the 3 or 5 gl
Answer:	I have the same problem. Did you ever find a replacement strainer that is easy to get out through the rack?
Question:	Can this product be used in a paint sprayer
Answer:	Outer diameter is 4.5", inner diameter 3". It fits my kitchen sink perfectly.
Question:	Where can I get the clear in 5 gallon buckets? I love my new fence and don't want to apply any stain color
Answer:	Yes, it works quite well for me. I have a double sink, so I bought two. I keep one on the garbage disposal side at all times to prevent silverware (etc) from falling in. This works very well in my kitchen.
Question:	I am looking for "olympic natural look protector plus sealant ", for my red wood deck. is this the same one
Answer:	There are two different models you must choose from. One is only a strainer, while the other is both a strainer and a stopper. Just pick the one that reads 'strainer stopper' and you'll be fine!

Product features

Stain + Sealant in One

Stain + Sealant in One protects and beautifies in one step.

Weather-Ready Application

Allows greater opportunities for staining when it may rain or when the weather may be too hot or cold.

Enhanced waterproofing protection

Helps make sure your wood is protected from cracking due to water.

Advanced SunBlock UV

Helps protects your wood from dangerous UV rays that can wear down the coating.

How much stain do you need to buy?

One gallon of wood stain covers approximately 250-350 square feed, which is enough for a small to medium deck. It should also cover both sides of a 25 foot long fence or a couple pieces of furniture.

Two Gallons

Two gallons of wood stain cover approximately 600 square feed, which should be more than enough for the standard deck project or a 50 foot long fence.

Three or more Gallons

Three or more gallons of wood stain will most likely only be needed on large projects, as they should cover over 850 square feed.

Note: Solid Color Stain requires two coats. You should effectively double your gallons purchased when using a solid.

How To Stain Your Wood Deck In 3 Easy Steps

Sweep debris from deck and then use a product such as Olympic Premium Deck Cleaner to penetrate the wood and lift dirt to the surface to be cleaned, as well as clean stains caused by mildew, dirt, algae and mold. Allow surface to dry.

STEP 2

Tape off any surfaces you don’t want stained. Also, avoid staining in direct sunlight or on hot surfaces because the stain will dry too fast to penetrate properly.

STEP 3

For clear, toner and semi-transparent stains, apply a thin coat with a high-quality brush, roller, paint pad, or spray. For solid stains, apply two thin coats with a brush, roller, or paint pad. To avoid lap marks, apply to a few boards at a time, keeping a wet edge.

For best results, backbrush into the surface to work finish into the wood and ensure the coating is even. Make sure to treat all areas of the wood, including joints, edges and ends.

You’re going to want to follow the directions on your stain container to determine if anything needs done after your final application.

Olympic Wood Stains: A reputation as durable as our products

Olympic Wood Stains has provided exceptional protection and durability for all wood types, applications and budgets since 1938.

Nothing protects and beautifies your wood like Olympic Exterior Stain. Trust the natural beauty of your wood to Olympic Stains.

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.Easy maintenance - no sanding or stripping required for re-application
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• "Goof Proof" application

User questions & answers

Question:	What is the warranty on this
Answer:	None unless you buy at home depot
Question:	How long can the product be stored once the container is opened
Answer:	No
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	The Kreg Deck Jig Bit can only be used with the Kreg Deck Jig.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I don't know. I suggest contacting Kreg company to get the answer.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

• PROFESSIONAL LEVEL PROTECTION: Extreme Protection For Your Bamboo Deck, Dock Or Fence Without Toxic Chemicals. Extreme Bamboo Is A Plant Based & Non-Toxic Wood Sealer That Keeps Wood Looking New And Protected For 15+ Years
• EXTENDS THE LIFE OF YOUR DECK: Protects Bamboo And Exotic Wood Types From Water And UV Damage. SIG Extreme Bamboo Will Extend The Life Of Your Fence, Deck Or Shingles
• NO MORE DAMAGE: Protects ALL Wood Types From End Grain Checking, UV Damage, Cupping, Cracking And Other Naturally Caused Damage
• DEEP PENETRATING: Protection To The Core Is More Than A Tag Line. Extreme Bamboo Continues To Penetrate Into The Core Of The Board For Over A Month After Application. CONTAINS No Mineral Oils, Mineral Spirits, Pine Or Linseed Oils. Covers 400-600 Square Feet Per Gallon
• WORKS ON ALL WOOD TYPES: Developed For Bamboo Works Equally Well ON ALL WOOD TYPES: Ideal For Use On All Exotic And Traditional Wood Types Such As Bamboo, Ipe, Brazilian, Oak, Yellow Pine And Others. Ideal For Use To Protect Green Wood From Checking And Cracking. Use On All Wooden Decks, Docks, Fencing, Patio Furniture, Shingles, Logs, Tree Carvings And More

User questions & answers

Question:	Will this protect a new bamboo shower bench and foot stool, if so, how should it be applied
Answer:	No, they are stainless. Will not rust even in saltwater
Question:	How can I apply protectant to newly purchased bamboo roller shades for exterior lanai
Answer:	I used them on my wood fence they worked great. I would use them for your project.
Question:	What tempature do i need to apply the product? i like in wa st and rains often here, what is min and max tempatures to apply
Answer:	Any where that sells auto feed screw guns
Question:	Does it work on bamboo poles to protect against the weather (sun and rain
Answer:	All corrugated brand screws will work, it can do decking screws just have good steady down pressure

Product description

Olympic smart guard is the smarter way to seal. The Clear concentrate dries in only 1 hour allowing you to prep, clean and enjoy your deck in less than a day. Easy, fast, strong. Olympic Smart Guard Waterproofing Sealer penetrates the substrate to provide advanced durability and protection. Olympic Smart Guard clear deck sealant can be applied to wood decking, concrete patios, masonry, and even composite decks after rain or cleaning and dries in 1 hour. It is formulated to be extremely fast and easy to apply, especially from a pump sprayer, but applies easily with brush or roller as well. Smart Guard is a completely different sealant technology that penetrates wood to protect it from water damage at the surface and below. SmartGuard is highly water-repellent, but allows wood to breathe. Less water trapped in the wood means less water damage. When it comes to your outdoor space, Smart Guard is a versatile and convenient sealing solution. It seals wood, concrete, masonry and weathered composite, and its super-concentrated formula covers up to 500 square feet. One small, easy-to-handle, easy-to-pour pouch covers as much as two gallon cans. Easy Three-Step Spray Application: Simply add 2 gallons of water into your sprayer Pour in entire pouch of Olympic SmartGuard Pump and spray. Apply liberally See product label for full prep, application and disposal instructions.

• Stain Your Deck Quickly And Easily - Olympic Smart guard is a patent-pending deck stain product that allows you to simply spray on the sealant eliminating the need for back-brushing your deck.
• Simple Stain Process - To apply Olympic SmartGuard Deck Sealant simply pour the pouch into a deck sprayer, add 2 gallons of water, and then spray over your deck - it works on traditional wood decks, concrete, and even composite decking!
• Quick Dry - Dries in 1 hour so you can entertain or spend time outdoors with less hassle and less disruption. Apply this deck sealant quickly and get back to enjoying your day.
• Use Even After Rain - Can be applied after cleaning or rain ensuring you get to have fun on your deck as quick as possible
• Durable - Strong durability and waterproofing protection makes Olympic Smart Guard the smart choice for any homeowner who wants to seal their wood or composite deck quickly and still enjoy the outdoors
• Multi-Surface Use - While many deck sealants only work on wood, Olympic Smart Guard works as a sealant on Wood Decks, Concrete Patios, Masonry, and even weathered Composite Decks
• A Trusted Name In Deck Stain Technology - The Olympic brand has been trusted to provide quality results since 1938. Its history of excellence and expertise has made Olympic Stains a category leader with a reputation for delivering innovation and durability at an affordable price. Gorgeous results are always guaranteed with Olympic Stains. With a full range of exterior stains, resurfaces and wood cleaners, we have the products you need to complete your next wood staining project right.

User questions & answers

Question:	Does it contain teflon
Answer:	The product is great and very stable. It is possible to “under mount“ this product. Sink will have to be mounted to a “subframe support” conforming to the entire perimeter of the bowl. The sink can be attached to a 3/4 - 1” frame using the supplied mounting clips. Anything thicker will be questionable. Allow for 1/8” (sink-lip) space between the subframe and the bottom surface of your counter material. An ample application of silicone sealant (Clear) between sink and the counter top will do the job.
Question:	Can this be used on painted deck
Answer:	Approximately 7 1/2” on my sink.
Question:	Can it be brushed on
Answer:	The roll up dish rack is included in the package. If not included, pls email to us through [email protected] with your order ID, we will make this correct.
Question:	May wood surface be painted with finish after being treated with this sealant
Answer:	For proper fit, we recommend taking the exterior dimension of the sink(left to right) and adding at least 3" for access to install hardware. Actually, can be smaller a little than we suggest.

Product features

Clean, Seal, and Enjoy All in One Day!

Olympic SmartGuard multi-surface waterproofer is a concentrated clear sealer formulated for easy application and fast dry. Olympic SmartGuard Waterproofing Sealer penetrates the substrate to provide advanced durability and protection. It can be applied after rain or cleaning and dries in 1 hour. It is formulated to be extremely fast and easy to apply, especially from a pump sprayer, but applies easily with brush or roller as well.

Simple Spray-On Application

Simply add 2 gallons of water into your sprayer. Pour in entire pouch of Olympic SmartGuard wood and composite deck sealant, pump and spray. Apply liberally.

Clean, Seal and Enjoy in one day!

When it comes to sealing your deck, Olympic SmartGuard can save you time. It can be applied to damp wood, even after cleaning or rain. Dries in 1 hour, so your surface is back in use 1 hour after application

Highly Water Repellent

SmartGuard is a completely different sealant technology that penetrates wood to protect it from water damage at the surface and below. SmartGuard is highly water-repellent, but allows wood to breathe. Less water trapped in the wood means less water damage.

Clean your Deck

Use Olympic Premium Deck Brightener and Wash to clean your deck, removing mold and mildew stains. This will also help restore weathered wood. Be sure to scrub your deck thoroughly to ensure the cleanest possible surface.

Mix in a Pump Sprayer

While you can apply SmartGuard in a traditional way, the formula is particularly convenient when used with a pump sprayer. Mix it into your sprayer with 2 gallons of water.

Apply to your Deck

Spray the mix onto your deck! Apply as much as you see fit, as you want to guarantee you're covering every inch of your deck. You can also use a brush to brush SmartGuard on to harder to reach surfaces, like a railing.

Let Dry and Enjoy

Let the surface dry for 1 hour and your newly-stained deck is complete!

Seals and Stains Wood

When it comes to your outdoor space, SmartGuard is a versatile and convenient sealing solution.

Protects Concrete

It seals wood, concrete, masonry and weathered composite, and its super-concentrated formula covers up to 500 square feet.

Keeps Masonry Safe

One small, easy-to-handle, easy-to-pour pouch covers as much as two gallon cans.

Yes, Even Composite!

Easily stain or seal your surface of choice with Olympic SmartGuard.

About Olympic Stains

A Reputation as Durable as Our Products

The Olympic brand has been trusted to provide quality results since 1938. Its history of excellence and expertise has made Olympic Stains a category leader with a reputation for delivering innovation and durability at an affordable price. Gorgeous results are always guaranteed with Olympic Stains. With a full range of exterior stains, resurfacers and wood cleaners, we have the products you need to complete your next wood staining project right.

At Olympic Stains, we are constantly innovating new ways to help you stain your next project.

• LIFETIME WOOD CORE PROTECTION. Eco Friendly Plant Based Oils & Catalyzed Copper Penetrate Deep Within The Wood To Form A Permanent Bond With Wood Fibers
• XTREME PROTECTION From UV, Water And Naturally Caused Damage. No More Constant Replacing Of Rotted Deck Boards
• SEALS, WATERPROOFS & PRESERVES Exotic Wood, Bamboo, IPE Pressure Treated Wood And Everything In Between
• GREEN WOOD PROTECTION From Cupping, Curling, Cracking And End Grain Checking And Splitting
• NEW TO AMAZON! Get The Results The Pros Get. Contains No Mineral Oils, Cedar Oil Or Petroleum Oils. Covers Up To 400 Square Feet

User questions & answers

Question:	Could I use on indoor hardwood floors
Answer:	I didn’t count, but the listing says 237, and is a full size 5 pound container
Question:	Do you have any references or pro's using this in the Atlanta area
Answer:	The packages are by weight (5lb). The 4-1/2 inch screws have 237 screws. The 5-inch screws have 210 screws.
Question:	Can this be used on a children’s outdoor playset
Answer:	Good day. Thanks for your valued inquiry: Stainless steel is a little softer than hardened steel screws, so we strongly recommend pre-drilling and countersinking for best results. Hope this helps. Thanks. Elton
Question:	Does wood need to be cleaned with renu cleaner concentrate prior to application as it does with seal it green bamboo, and if so, who sells it
Answer:	On the 3 inch screw it is 3/4 inch. Don't have the 2 1/2.

Product description

Rain Guard Water Sealers premium wood sealer is specifically formulated to work on all wood surfaces. A silane siloxane penetrating water repellent sealer can be used on vertical and horizontal. What makes wood sealer different from the rest is our proprietary ingredient called micro-lok. This additive ensures a long lasting mechanical bond and creates a hydrophobic barrier that is not affected by weathering, salt, dirt, freezing temperatures, UV light and wind-driven rain, among many other damaging elements. Easy clean up. Simply use soap and water directly after application is completed. Available in Ready to Use and cost effective Concentrate formulations. Other Rainguard specialty formulated products to protect these surfaces: Brick, Pavers, Paint, Stucco, Stone, Wood, Concrete

• Prevents water damage and salt damage.
• Does not alter surface appearance - leaves no surface film, no sheen and will not yellow.
• Specifically formulated project sealers include these surfaces; Brick, Pavers, Paint, Stucco, Wood, Concrete
• Comes in Ready to Use and cost effective Concentrate formulas.
• 100% satisfaction

Product features

Rainguard Water Sealers Wood Sealer

Protect, restore, and extend the life of your project with Rainguard Water Sealers Wood Sealer. Formulated to penetrate deep into the surface, Wood Sealer is a water-based silane/siloxane water repellent. It can be used on unpainted, interior or exterior, vertical or horizontal surfaces and dries clear with an invisible natural finish.

Surface Preparation:

Remove dust, dirt, and debris from the surface. Gently remove any stains with soap and water or use Rainguard Restore-N-Prep. Once the surface is clean, make sure to let it dry until it is “bone dry”. This will allow the sealer to absorb deep into the surface for maximum protection. Think of your surface as a sponge. A wet sponge will not be able to absorb as much as a dry sponge.

Use on the Following Vertical or Horizontal Surfaces:

Wood Deck (horizontal): Approx. 150-200 square feet per gallon depending on surface porosity

Wood Fence (vertical): Approx. 125-150 square feet per gallon depending on surface porosity

Specialty Wood: Contact for Approx. Square Footage

• UV RESISTANCE - Our Deck and Dock Coating has excellent solar reflectivity and UV stability; reduces heat transfer by up to 35% compared to regular paint
• PROTECTIVE FINISH FOR - Wood, concrete, decks, docks, walls, fences and more for a seamless membrane!
• EASY TO APPLY - Use a brush, roller, or paint sprayer for a seamless and fully adhered membrane. Designed as a stand-alone coating but can also be used with Liquid Rubber Seam Tape
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Deck and Dock Coating is water based, non-flammable, and non-toxic, containing no solvents or VOC's. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• COVERAGE - Apply a minimum final thickness of 1 gallon/40 square feet (3.7 sq m). This should require 3-4 heavy coats. Heavy traffic areas require 1 gallon/30 square feet (2.8 sq m)

User questions & answers

Question:	On concrete, does the multi purpose primer need to be applied first
Answer:	Eucalyptus wood works just fine with this oil. Cannot be used on wood previously varnished or Polyeurethaned. Should work absorbing into wood with weathered oil base stain-- we'd recommend a test area be done first to confirm uniformity.
Question:	Could this be used as a filler for small driveway cracks less than .25 inches
Answer:	VOC is for "volatile organic compounds", which is a measure of how much solvent/toxin is released into the air as it dries. The maximum allowed in flat/latex is 250 g per liter, and for other paints, the federal cap is 380 g/l. The lower the VOC number, the better for your health. A con of using lower VOC paints is that they may not be as long lasting or of lower quality than higher VOC paints.
Question:	On an old wood porch, to seal it and not have to paint again for a few years do i use cool foot deck and dock sealant or the polyurethane deck sealer
Answer:	I'm not sure what type of wood you have, but I'm going to assume you have Ipe which is dense and doesn't penetrate well to begin with. I would not recommend applying the Ipe oil over Thompsons Water Seal. It's likely to just sit on top of the water seal and not be able to penetrate the wood. If the oil doesn't soak into the wood, it won't dry. When the oil stays wet too long it gets sticky and dust sticks on the surface. You end up with a big mess. To give you an example, we have an area on our deck that is under a large overhang. It doesn't get much sun and therefore doesn't need to be re-oiled as frequently. Our painter power washed this area and let it dry. Then put another coat of the Ipe oil over an existing coat of Ipe oil. It took months for the oil to dry and because of the wind and all that naturally blows around outside, many particles stuck to the oil and it ended up looking dirty and filmy.
Question:	How do the liquid rubber products stand up to winter snow and rains, and summer sun at 7,000 ft. elevation with significant uv exposure and drying
Answer:	I had an older ipe deck ~ 16 X 46 ft or ~ 740sq ft. maybe a little more porousthan new after stripping older finish. 3 gallons just did it with some areas stillnot fully penetrated. I have a fourth gallon for touch up which seems quite easy.I'm very satisfied with the rich color and grain exposure, very nice and went on easily with a roller and brush touch up. Best ipe finish I've tiried. May use it on someteak on my sail boat.

Product features

Liquid Rubber Cool Foot Deck & Dock Coating

What’s the point of a patio deck you can’t use when the sun’s out? With Liquid Rubber Cool Foot Deck & Dock Coating, you can use your patio anytime. The coating is a brush, roll and spray high-performance, acrylic; elastomeric coating that reduces heat transfer by up to 35% compared to regular paint.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Cool Foot Deck & Dock Coating. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Solar Reflective

Liquid Rubber Cool Foot Deck & Dock Coating is a high-performance, acrylic; elastomeric coating that reduces heat transfer by up to 35% compared to regular paint. It’s UV resistant allowing it to keep its effectiveness for years to come. This means you, your kids and your pets can enjoy your deck for longer without worrying about it getting too hot.

Easy to Apply

Basically just like painting except you use heavy coats to build up your coating. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by brush, roller or good quality conventional paint sprayer.

Uses

When you’re looking to make a surface cooler, think of Liquid Rubber. Liquid Rubber Cool Foot Deck & Dock Coating can be used for decks and docks, but it can also be used on so much more. Use on stairs, benches, concrete floor and more. With multiple colors to choose from, you’ll be sure to find one that works for any situation.

Product description

Ipe Seal from DeckWise is a wax emulsion sealer proven to increase the structural integrity of hardwood decking. Designed to prevent end checking (drying splits) in freshly sawn logs, lumber, turning blanks, and other exposed wood end and face grain. Ipe Seal creates a bond that extends the life of each deck board. One quart of end sealer covers approximately 500 square feet of decking. The sooner our sealer is applied to exposed end grain (and face grain of turnings and carvings), the more effective the coating will be. The application is recommended to cover the wood within 24 hours of cutting. Our End Sealer may cause color or shading changes in wood, depending on species, dryness, handling or other natural variables. Test on ends of sample piece(s) and let stand for 48 hours if this possibility is of concern. See label for specific cautionary first aid instructions.

• Easy Application, Exceptional Results
• Protects the structural integrity of hardwood decking
• One quart of end sealer covers approximately 500 square feet of decking

User questions & answers

Question:	Will this work on cut ends of composite deck boards
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	Is this just for End grain (cuts) or can you get away with using it on top as well for the face
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	would this be good for my ipe, tigerwood, and paduk knife handles
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.
Question:	would this be good for fresh cut red cedar logs
Answer:	The #10 screws are T25. The #8 screws are T20.

Product description

Liquid Rubber Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.

Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, coal tar or other contaminants. Typically cures within 24-48 hrs. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs. Not meant as a constant walking surface.

Coverage - Vertical Surfaces - Apply a minimum final thickness of 1 gallon/30 sq ft (2.8 sq m). It should require around 3-4 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.



Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon/15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2mm) (DFT) membrane.

Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.





Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.



Use all material up to achieve a long lasting membrane.



Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans.

Clean Up - Use soap and water or mineral oil to clean skin.

100% MONEY BACK GUARANTEE - If you need to return anything, we'll refund your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days.

• PROTECTIVE FINISH FOR - Flat roofs, metal roofs, sloped roofs, planter boxes, foundations, sheds, basements, metal, wood, concrete and more
• HIGHLY FLEXIBLE & DURABLE - Final membrane has over 1000% elongation preventing adhesion failure, and is UV Stable stopping the sun from degrading the product
• COVERAGE - Vertical Surfaces - 1 gallon/30 sq ft (2.8 sq m). 3-4 heavy coats to achieve a 30 mil (0.76 mm) membrane. Flat/Ponding Surfaces - 1 gallon/15 sq ft (1.4 sq m). 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) membrane
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant/Coating is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

User questions & answers

Question:	I have a black plastic pond i got from home depot. will it adhere to that material
Answer:	You can apply protectant by using lambswool First wipe off all excess product or this may make the shades tacky. Next, apply with lambswool applicator allowing this to sit for ten minutes. When finished wipe off with a rag. Lastly wash the applicators and the rags with warm soapy water and lay outside to dry.
Question:	I want to seal hardi plank siding. adheres to hardi plank installed vertically?...cement type materials
Answer:	Between 50 and 100 degrees Fahrenheit is ideal. It is best to apply when the weather has been dry and sunny for at least 24 hours, and when no rain is forecast for 24 hours. Thank you for your inquiry.
Question:	How long does new concrete need to cure before applying liquid rubber? We are sealing our new concrete pond with this product = will not have fish in
Answer:	Yes. Make sure that all coatings the manufacturer may have applied have worn off. Then just clean and treat!
Question:	can use to seal koi pond
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.

Product features

Liquid Rubber Waterproof Sealant

The perfect product for a roof restoration or planter box, Liquid Rubber Waterproof Sealant works by creating a watertight seal to keep moisture where you want it. With multiple uses, the possibilities are endless.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Waterproof Sealant. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Highly Flexible

Liquid Rubber Waterproof Sealant is highly flexible once cured. With over 1000% elongation, you don't have to worry about minor movement destroying all your hard work. Still worrying about movement? Bulletproof your work with the help of Liquid Rubber Seam Tape or Geo-Textile.

Liquid Rubber Waterproof Sealant is UV Stable so the sun will not degrade the product.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer.

Endless Possibilities

This nature-friendly product allows for an endless possibilities of usage. When you need a watertight seal, think Liquid Rubber. Use for roofs, gutters, planter boxes, ponds, sheds, mobile homes, metal, wood, concrete and more. Empower the DIYer in you with Liquid Rubber.

Product description

Seal It Green is the leader in high performance, wood sealers and cleaners. Xtreme Marine is specifically formulated for the extreme environments around lakes and oceans. Xtreme Marine plant based making it the first true non-toxic, high performance wood marine wood sealer on the market. Xtreme Total Wood is also Nearly VOC Free (under 20g/l) and will inhibit damage and rot caused by mold, mildew, algae, insects, water and harsh sunlight. No more rotten boards, cupping, cracking or curling. Xtreme Marine will make your wood deck, dock or fence nearly maintenance free. If you want to make your exotic hardwood wood deck, traditional softwood deck, dock, log cabin or wood patio furniture nearly maintenance free then use Seal It Green Xtreme Total Wood. SIG Total Wood penetrates deeply even the hardest of woods. ONE GALLON COVERS UP TO 400 SF. You may get up to 600SF on some hardwoods and less than 400 SF on decks older than about 10 years. Does NOT Contain Mineral Oils/Spirits, linseed oils or pine oils. This product is not intended to be used as a pesticide, mildew-cide or fungicide. Wood treated with SIG Marine Is Protected from damage from mold, insects and UV for a decade or more. However, wood treated with SIG Marine may naturally gray slightly after several years. If the graying is objectionable, a simple cleaning can bring the wood back to its original look with a reapplication of SIG Marine. Ingredients you can understand: Tree And Nut Oils, Plant Derived Carrier, Coconut Derived Surfactants

• Seal It Green Marine Creates A Nearly Maintenance Free Wood Dock Or Fence By Inhibiting Damage Caused By Mold, Mildew, Algae, Insects, Water Or The Sun.
• Seal It Green Penetrates And Bonds To The wood Fibers To Ensure The Wood Is Protected From Rot And Damage From Insects For 10 Years Or More
• Non-Toxic, Plant Based, Near VOC Free Ingredients Seal And Protect All Wood Types
• Protects Wood From Cupping, Curling, Cracking, Rot And UV Damage. Contains No Mineral Oils/Spirits.
• Ideal For Use On Decks Or Docks Along The Water. Seal It Green Is The

User questions & answers

Question:	What can safely used as a wood preservative for raised vegetable beds
Answer:	No
Question:	Can this be used in a sauna
Answer:	It is plant based and so does not contain the same harsh chemicals as other wood sealers. If you choose it, apply the product according to the instructions and be sure to wipe off any excess sealer. However, if your children have any sensitivities to cleaners or chemicals I would suggest leaving the wood unsealed. If you have additional questions give us a call at 267-614-1885.
Question:	Can this be used over a stained deck
Answer:	You can buy the cleaner on Amazon. The cleaner helps prepare the surface and is ideal but not absolutely necessary.
Question:	Can this be used for sealing wood to make a hot tub
Answer:	Yes it would. Ensure there are no other dealers or coatings on the wood. If so, remove it by sanding or stripping. Ideally apply the product outside with a deck stain pad or brush. Wipe off all the excess with a rag (very important). Let it cure for 24-48 hours prior to use in a shower.

Product description

3M Marine Adhesive Sealant Fast Cure 5200 is a fast-curing version of long-trusted 3M Marine Adhesive Sealant 5200. It is a tough, flexible polyurethane for permanent bonding and sealing, ideal for use on wood, gelcoat, fiberglass, metal and more. It is recommended for interiors, below the waterline and any other places that are shielded from sunlight. Instead of 5-7 days, it typically cures in just 48 hours. Everything else is the same as the industry standard 5200 adhesive sealant that has been used and trusted for more than 50 years by marine professionals in some of the most demanding conditions on earth. It applies right from the container – no mixing is required - and cures to form a firm, flexible, waterproof seal on joints and boat hardware. Far more than a marine caulk, tough, flexible 3M Marine Adhesive Sealant 5200FC dissipates stress caused by vibration and shock and won’t crack under dynamic force. It resists saltwater, wind, weather and temperature extremes for long periods of worry-free enjoyment on the water.

From the Manufacturer

3M Marine Adhesive Sealant 5200 White. The adhesive sealant is extremely strong, retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.

Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Center board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Remains workable with trowel or spatula up to four hours after application. Won't sag or flow in vertical or horizontal seams.

About 3M Industrial Adhesives and Tapes

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M Industrial Adhesives and Tapes include application-specific products that provide durability, strength, and special characteristics such as temperature resistance and short- and long-term protection. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• CURES FAST – One-part adhesive sealant requires no mixing, typically cures within 48 hours so you can get back on the water faster
• USE WHAT THE PROS USE – Extremely strong adhesive sealant retains strength above or below waterline
• BONDS PERMANENTLY – Ideal for sealing, bonding and attaching on the interiors of boats and RVs, or on exteriors below the waterline and where shielded from the sun
• LONG LASTING FORMULA – Tough polyurethane polymer resists weathering and salt water
• WON’T CRACK OR PEEL – Stays flexible, retaining strong bonds even during vibration, structural movement or shock

User questions & answers

Question:	The package says 'watertight bonding/sealing of gelcoat/fiberglass and wood'. Doesn't mention metal, plastic. Why
Answer:	This product is a wax emulsion sealer designed only for exposed end grain (cuts). The seal it provides is too thick and slick for surface application. We recommend the use of a protective oil (such as Penofin Hardwood Formula, available here: https://www.amazon.com/dp/B00VGOEBB8) to properly maintain your exotic hardwood surfaces.
Question:	Can this be used to fill a 1/4 inch hole below the water line
Answer:	Yes, it will work on those species of wood. According to their website, "Our End Sealer may cause color or shading changes in wood, depending on species, dryness, handling or other natural variables. Test on ends of sample piece(s) and let stand for 48 hours if this possibility is of concern. "I hope that helps!
Question:	does this work on polyethylene (Kayaks
Answer:	It is not intended for that. It us intended for very dense tropical woods. Cedar is a much less dense wood. Why not use a product designed for cedar?
Question:	Will this work to fasten galvanized sheet metal to a aluminum boat
Answer:	Until we finish testing, we recommend that this product be used only for outdoor projects.

Product features

3M MArine Adhesive Sealant 5200 Fast Cure

3M Marine Adhesive Sealant 5200 Fast Cure is a one-component, high-strength, moisture-curing, gap-filling polyurethane for permanent bonding of aluminum, wood, gelcoat and fiberglass. This fast cure version of 5200 is formulated to typically cure within 48 hours. It chemically reacts with moisture to provide strong, flexible bonds above or below the waterline.

Product description

SEAL-ONCE has been leading the innovation in the use of nanotechnology to create long-lasting, non-toxic wood sealers & tinted wood stains since 2005. Our New & Improved NANO+POLY Penetrating Wood Sealer provides superior protection against water damage, mold, decay and eliminates warping & cupping. Unlike most top-coat sealers, NANO+POLY deeply penetrates the surface of wood, using proprietary nanotechnology to form a flexible breathable barrier, that coats the wood fibers at the cellular level. This water-based wood protector combines proprietary nanotechnology with the strength of polyurethane to provide 360° of protection. It is warranted to protect against water accumulation for up to 10 years on vertical surfaces & 6 years on horizontal. With the added POLY in this formula, it also creates a durable surface-coating, that protects against wear & tear in high traffic areas, making it a great choice for wood decks and walkways. NANO+POLY is a water-based, eco-safe sealer that goes on milky white & dries clear and is ideal for use on unfinished interior and exterior wood.. It creates a UV-stable coating that preserves the natural color of the wood and helps resist weathering and decay. It allows wood to age naturally without decay, is non-film forming and will not alter the natural beauty of the wood. NANO+POLY is Ultra-low VOC, making it VOC compliant in all 50 states, including California. NANO+POLY can be tinted and used as wood stain or finish in 11 semi-transparent color tints that also provide added UV protection. Battleship Gray, Black, Bronze Cedar, Brown, Cape Cod Gray, Cedar, Light Brown, Mahogany, Natural, Redwood & Shale Gray. Recommended Applications Decks Railings Wood siding Log homes Thermally modified wood Docks Piers Fences Exposed beams Outdoor furniture Planters Play structures Cedar shingles. The Days of Needing an Oil-based Wood Sealer & Stain full of Toxic Chemicals are Over

• Eco-Safe
• Non-Toxic
• Pre-Mixed

User questions & answers

Question:	Can this be applied with a garden sprayet
Answer:	Yes, you can use Liquid Rubber Waterproof Sealant to seal a koi pond. It is recommended to use the Liquid Rubber Seam Tape or Liquid Rubber Geotextile to reinforce the joints, seams and 90 degree angles.
Question:	can you paint over this
Answer:	Not designed for composites. Sorry

Product description

5 gallon, exterior, clear, Olympic multi-surface Waterguard sealer. A clear waterproofing sealant for concrete, brick, wood and more. Penetrates to protect from water damage, mildew-resistant coating, seals out water to reduce cracking caused by freeze-thaw cycle. Easy soap and water clean up.

User questions & answers

Question:	Is this safe to use on a concreat porch to protect it from the winter
Answer:	Yes
Question:	Can this be used on concrete in an unfinished basement
Answer:	Yes, put a few coats on. Let each coat dry well (24)hrs . You can spray on inside of pond. I used a undercoating product used for undercoating cars for the outside of pond. I put 3 coats on. I let each coat dry for 2 days before applying the next coat. All worked great my pond is like new and no leaks and all of my goldfish are fat and happy! Good luck! Take your time and cover every spot even sides. Make sure the pond is very clean before u start applications. I used a ruff kitchen pot scrubber to scrub clean.
Question:	Can this be used in a sprayer
Answer:	Our products adhere well to cement type materials but we haven't tested them on Hardie Plank Siding. I suggest applying a test area with one quart and you will know within a week whether it works properly.
Question:	I am looking for 5 to 10 gallons of this product. I reside in 91741 area, Glendora, CA, is itt possible to pick this up at localstore for this price
Answer:	New concrete needs to cure as per the installation instructions. Applying any of the Liquid Rubber products or most waterproofing products prior to a full cure may compromise the curing process of the concrete.