13 best valspar deck stains

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Thompson's WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Use on decks and fences, outdoor furniture and exterior wood. Shows medium wood grain and medium color. 1-coat protects 4 years on decks or 6 years on fences and siding. Applies to freshly cleaned damp or dry wood. Prevents water damage. Advanced polymers provide fade resistant color. Coating resists mildew and UV damage.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	The listing says semi-transparent, but the picture says transparent, which version is this
Answer:	Semi
Question:	Is this a gallon container of the product
Answer:	Yes this is a one gallon of Thompson water seal
Question:	what clear seal do you recommend to use on 12year old pressure treated planks
Answer:	I've used Thompson's water-based semi-transparent stain/sealer 3 times now for my 15 year-old pressure-treated deck and it has always done a great job of covering and protecting the wood. It doesn't really last the 4 years they claim, but still very good. They also make an oil-based clear sealer and I use that on my cedar pergola, also very good stuff but it's hard to work with because it doesn't cleanup with water. As an alternative to the oil-base they have an all-purpose water-based clear sealer for wood and masonry. I would use that on my pergola if it was made of pressure treated wood, but with cedar I really want a penetrating oil. So for your pressure treated deck, I would recommend the water-based clear sealer. Given how well the semi-transparent stain has worked for me, I would expect good results with the clear as well. You will certainly want to clean the wood first if you expect to brighten the gray appearance of aged wood. I spray oxygen bleach on the wood first and then scrub with a stiff brush and rinse before sealing.
Question:	Would this product work well on untreated Adirondack furniture
Answer:	Yes, I think it would be suitable. I have only used it on my deck however. Good protection in a wet climate. Rub it down well after it dries to keep the color from getting on clothes though if you're using a color stain.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

VALSPAR INTERIOR/EXTERIOR BONDING PRIMER, GALLON

Product description

Valspar Oil and Latex Barn & Fence paint flows on smoothly and dries to a tough, durable finish. It is fade and weather resistant.

From the Manufacturer

Valspar Oil and Latex Barn & Fence paint flows on smoothly and dries to a tough, durable finish. It is fade and weather resistant.

• Flows on smoothly and dries to a tough, durable finish
• Fade and weather resistant
• Ideal for exterior surfaces including wood, masonry, primed metal, weathered steel and aluminum siding

User questions & answers

Question:	I am thinking of using for window and shutter trim on our dark brown home . I have burgundy now. thoughts? thanks Carol
Answer:	Question needs clarification
Question:	You say it has a "tough, durable finish" - but - is it gloss - semi gloss or flat
Answer:	I believe so but it is not slip resistant
Question:	Paint for horse stalls
Answer:	In microns or what? It is medium viscosity paint with good “roll-on” coverage.
Question:	how long is dry time,what is the coverage
Answer:	It's complete. You do not need hardener. However, you may want to use the clear top coat for longevity.

Product description

Cabot Gold, Gallon, Sunlit Walnut, Ultimate Wood Finish, Providing Beautiful Sheen & Strong Protection From Mother Nature's Worst UV Sun Damage, Extreme Temperatures, Rain & Moisture, First Coat Penetrates, The Second Coat Adds Dimension As It Seals, Finish Mimics The Look Of Interior Hardwood Floors, Amount Of Sheen Will Vary Based On Number & Thickness Of Each Coat, Will Weather Gradually Over Time, Use On Exterior Wood Decks, Siding, Fences & Outdoor Furniture, Provided Wood Is Sound & Free Of Other Coatings, Sealers, Dirt & Other R Contaminants, First Covers About 250-350 SQFT Per Gallon, Second Coat Covers About 300-400 SQFT Per Gallon.

• Cabot Gold Gallon Sunlit Walnut Ultimate Wood Finish
• Providing Beautiful Sheen & Strong Protection From Mother Nature's Worst UV Sun Damage, Extreme Temperatures, Rain and Moisture
• First Coat Penetrates, Second Coat Adds Dimension As It Seals, Finish Mimics The Look Of Interior Hardwood Floors

User questions & answers

Question:	We have an old can of valspar interior stain that is dark cherry. What is the new color equivalent
Answer:	Kentucky yes, Ohio no
Question:	can you use on old stain
Answer:	Yes I hope this helps. Norkan Inc.
Question:	Is this considered a transparent, semi or not
Answer:	Do not know about shipping to Michigan. Many restrictions on oil based products
Question:	How long does the finish last
Answer:	A little goes a long way. I do not recommend a sprayer as most woods will require brushing. It’s a must to prepare the surface before application and you will be rewarded with years of service. DO NOT USE THE WATER BASE VERSION.

Product description

The Deck Stain Applicator Brush by Foxtrot Works Perfect With Both Smooth and Rough Surfaces Such As Wood and Concrete.

 Works Perfect With Both Smooth and Rough Surfaces Such As Wood and Concrete.

★★ Features ★★

① Fast Application

② Works Great on Smooth and Rough Surfaces

③ Professional Finish

④ Long Lasting Quality With Strong Value

 

• FAST APPLICATION WITH PROFESSIONAL RESULTS – Deck Stain Applicator Brush Works Perfect With Both Smooth and Rough Surfaces Such As Wood and Concrete.
• LARGE SIZE BRUSH MAKES IT EASIER TO COAT – Save Time With Less Effort When You Use the Giant 7” Brush Head. Easy To Load Up and Cover More Space, Coat More Cracks All With Leaving Behind a Great Finish.
• 7 INCH BRUSH HEAD HAS UNIVERSAL POLE INSERT THREADS – (Pole Not Included) - Fits Most American Standard Pole Threads.
• WORKS WITH ALL OIL/WATER BASED PAINTS, SEALERS, AND STAINS – Smooth and Rough Surfaces – Concrete, Wood and More
• LIFETIME QUALITY, STRONG VALUE, ALL WITH PROFESSIONAL GRADE MATERIALS - 100 % Satisfaction Guaranteed With a No-Hassle Return Policy

User questions & answers

Question:	How well does it work with extension handle
Answer:	I have metal shutters, it worked good on these. If you want, take some wide 2 inch wide brown tape, place it on a piece of window trim and shutter area, paint it, make sure it dries, but do not leave the tape on to long, you might not get the tape off easy. Take a peek, see what it looks like, if you do not like it, just peel the tape off. Keep in mind, you also might want to use only "one or two" coats of paint on the tape. Hope this helps!
Question:	Can I use Solid stain with this
Answer:	Tough durable no gloss
Question:	How well does it work on solid stain application
Answer:	Would work great this is wonderful paint thick enough to cover in one coat
Question:	What long handle is recommended for use with this brush
Answer:	The can says 1 Gal. Covers up to 400 sq. Ft. or 100 to 150 sq. Ft. also Drying is said to be 20 min. to touch 4 hours between coats. There is no one answer, The Can makes claims but there are many variables, Temperature, Humidly, for drying time and Material Condition and type for Coverage. Old dry wood soaks it up like a sponge, figure 100 Sq ft, New primed smooth material figure about 400 sq ft. Drying takes longer when the material is Smooth and Primed.

Product description

Pro VT is an advanced-technology, 100% acrylic solid color stain formulated to have superior performance propertiesA heavily pigmented and exceptionally thick stainIn addition, this product has been developed for use in colder temperatures as low as 35? FCovers previously painted or stained surfaces in just one coat, and is so advanced that is does not require the use of a primer coat on woods such as pine, white cedar or cypressThis versatile, fade-resistant and water-repellent exterior stain provides superior results when applied on new or reconditioned wood siding and shingles, cement sidings, manufactured primed hardboards, previously painted surfaces, aluminum andpre-primed ferrous metal, masonry, stucco, MDO and plywood panel sidingNot for use on decksUltra White1 gallon

• VT is an 1 acrylic
• solid color stain formulated to have superior performance
• properties A heavily pigmented and exceptionally thick stain In

Product description

This item is a Cabot Clear Wood Protector GAL. Purpose of use for Painting Supplies, household-wood-stains. This product is manufactured in United States.

• Dual Action UV protection
• Deep Penetrating waterproofer
• Mildew & Algae resistant coating
• Also suitable for stone, masonry, brick and concrete

User questions & answers

Question:	Can this be used on interior furniture
Answer:	It works great with extension handle! Made staining deck super easy!
Question:	Can this be applied to damp wood
Answer:	Yes. Did a 2000 square foot deck last year with solid stain. Found this brush very helpful.
Question:	I asked the store clerk if I could use it for siding and paint over it, She said the paint first , than apply the product. Is this right
Answer:	Assume fine don't know why it would make much difference but have not tried it.
Question:	I am looking for a clear exterior stain for fence that makes the grains pop and turns it a brownish gold just like water . Will this product do that
Answer:	I used the handle off my garage broom

Product description

VOC COMPLIANTSOLID COLOR OIL DECKING STAIN - Cabot Solid Color Oil Decking Stain VOC Compliant #7600 Series is ideal for decks and fencing. Scuff-resistant finish made to be walked on, one coat application recommended. Not intended for siding, incense cedar, or interior surfaces. Do not thin.

• Size: 1 Gallon
• Color: Neutral base
• 100% alkyd resin
• A completely opaque finish for deck surfaces
• Dries fast (8 hours)

Product description

Brand Name: Cabot

Sub Brand: Australian Timber Oil

Transparency: Transparent

Tintable: No

Color: Natural

Coating Material: Natural Oil/Waterborne Hybrid

Product Type: Australian Timber Oil

Container Size: 5 gal.

Sealer: Yes

Indoor and Outdoor: Outdoor

UV Resistant: Yes

Recommended Surface: Finished Wood

Durability: 4 Years

VOC Level: Low VOC

Full Cure Time: 30 day

Coverage Area: 1250-1750 sq. ft.

Application Method: Brush

Application: Finished Wood Surfaces

Water Repellent: Yes

Protects decks, siding, railings and outdoor

furniture Deep penetration

Low odor Soap and water

cleanup 250 VOC compliant

everywhere Wide application

window Water reducible

• 19400 ATO OIL MOD NATURAL 5GAL
• ATO OIL MOD NATURAL 5GAL

User questions & answers

Question:	What is the color? I'm looking for 19400 natural
Answer:	Not really sure as we used to stain an unpainted deck and did nt paint ver it. Sorry I couldn't be more help!
Question:	is this the oil base version
Answer:	Stain is slightly yellow.

Product description

Provides wood penetrating protection again the sun and damaging weather elements. For use on siding, shingles, decks and fences. Water-repellent, keeping moisture out and guard against warping and checking. Mildew resistant. Use on new or reconditioned wood only, including decks, siding, roofs, shingles, shakes, trim and on log homes. Can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, redwood, plywood and pressure-treated wood. Dries to a flat, translucent-toned finish. Highlights: 5 Gallon Cedar Longer color retention and less fade so the surface looks fresher longer Deep penetration adds to life of the product and seals the surface Low odor Soap and water cleanup 250 VOC G/L Not compliant in SCAQMD Replaces Catalog ID: 42694470 Can

• 5 Gallon
• Cedar
• Longer color retention and less fade so the surface looks fresher longer
• Deep penetration adds to life of the product and seals the surface
• Low odor

User questions & answers

Question:	is this the same as the 1 gal cedar
Answer:	Answer here...I do not think so. I dried my truck bed.