13 best deck stain and sealers

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

Product description

Olympic Maximum stain + sealant in one, semi-transparent, is a great stain & sealer that can be used on exterior horizontal and vertical surfaces. It provides enhanced waterproofing and sunblock UV defense to strengthen, protect, and condition wood fibers, ensuring the wood's natural beauty lasts. Olympic maximum with weather-ready application is also specifically formulated to allow you to stain when you want, not when the weather dictates all while getting the same excellent results. Weather-ready application provides four great benefits: 1) you can clean and stain your wood on the same day - even after rain. 2) the stain is rain-ready after just 8 hours. 3) the stain can be applied when air and surface temperatures are as low as 35 Degrees Fahrenheit. 4) If the surface is too hot to touch, lightly mist the surface before application of the stain. Olympic - America's most trusted brand since 1938. Olympic - exterior wood stain for decks & more.

• Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water

User questions & answers

Question:	Title says 3 gl, options offers 5 gl. i click on 5 gl to the order but the order form shows 3 gl. so am i getting the 3 or 5 gl
Answer:	ask amazon that one
Question:	Can this product be used in a paint sprayer
Answer:	Yes. Do not thin or dilute this product.
Question:	Where can I get the clear in 5 gallon buckets? I love my new fence and don't want to apply any stain color
Answer:	Amazon
Question:	I am looking for "olympic natural look protector plus sealant ", for my red wood deck. is this the same one
Answer:	Hi there, the closest current product to the natural look protector plus is the Olympic Maximum Transparent/Toner product not the semi-transparent.

Product features

Stain + Sealant in One

Stain + Sealant in One protects and beautifies in one step.

Weather-Ready Application

Allows greater opportunities for staining when it may rain or when the weather may be too hot or cold.

Enhanced waterproofing protection

Helps make sure your wood is protected from cracking due to water.

Advanced SunBlock UV

Helps protects your wood from dangerous UV rays that can wear down the coating.

How much stain do you need to buy?

One gallon of wood stain covers approximately 250-350 square feed, which is enough for a small to medium deck. It should also cover both sides of a 25 foot long fence or a couple pieces of furniture.

Two Gallons

Two gallons of wood stain cover approximately 600 square feed, which should be more than enough for the standard deck project or a 50 foot long fence.

Three or more Gallons

Three or more gallons of wood stain will most likely only be needed on large projects, as they should cover over 850 square feed.

Note: Solid Color Stain requires two coats. You should effectively double your gallons purchased when using a solid.

How To Stain Your Wood Deck In 3 Easy Steps

Sweep debris from deck and then use a product such as Olympic Premium Deck Cleaner to penetrate the wood and lift dirt to the surface to be cleaned, as well as clean stains caused by mildew, dirt, algae and mold. Allow surface to dry.

STEP 2

Tape off any surfaces you don’t want stained. Also, avoid staining in direct sunlight or on hot surfaces because the stain will dry too fast to penetrate properly.

STEP 3

For clear, toner and semi-transparent stains, apply a thin coat with a high-quality brush, roller, paint pad, or spray. For solid stains, apply two thin coats with a brush, roller, or paint pad. To avoid lap marks, apply to a few boards at a time, keeping a wet edge.

For best results, backbrush into the surface to work finish into the wood and ensure the coating is even. Make sure to treat all areas of the wood, including joints, edges and ends.

You’re going to want to follow the directions on your stain container to determine if anything needs done after your final application.

Olympic Wood Stains: A reputation as durable as our products

Olympic Wood Stains has provided exceptional protection and durability for all wood types, applications and budgets since 1938.

Nothing protects and beautifies your wood like Olympic Exterior Stain. Trust the natural beauty of your wood to Olympic Stains.

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

• Wood deck protector - A true oil-based semi transparent stain and sealer meant to protect and highlight the natural beauty of the wood grain.
• Storm Wood Stain Protector is a semi transparent sealer that penetrates deep into the wood for added protection against Mother Nature.
• Compatible with any wood species. Great for wood staining Mahogany, as a Mahogany sealer, Cedar sealer, Cedar fence sealer, Redwood, Pine wood stain, Douglas Fir, Spruce Stain, Cyress, and Pressure Treated.
• Great for Decks, Fences, Siding, and other Wood Substrates. Can be used as a wood fence protector or any other wood substrate protector.
• Applies easily with brush, roller, or spray application. Lap-Free Application & UV Protection

User questions & answers

Question:	Does it take a long time to dry
Answer:	We have had a ton of rain so I have not used it yet.
Question:	How cold can I apply this to my covered porch?? Thanks rr
Answer:	Hello, The application temperature must be between 50-90 F.
Question:	Should I wipe down the wet spots after a few days of drying
Answer:	Hello, Yes lightly wipe those spots and and make sure those areas are dry before putting into use. note: wet spots could have been caused by a lack of penetration into the wood (a previous stain or sealant could be the culprit), applying to heavy, or the presence of moisture in the wood.
Question:	How do you open the plastic seal lid
Answer:	Hello, Thanks for your question on this. The plastic lid can be slightly difficult to take off, but is applied to ensure safe transport. To remove, I have found that a paint can opener or flat head screw driver wedged either in the top or on the side on the can works pretty easily. Be sure not to use a hammer to try and wedge the flat head screw driver in, as you want to avoid damaging the metal can.

Product features

STORM PROTECTOR EXTERIOR STAINS KEEPING THE EXTERIOR BEAUTIFUL

Storm Protector stains are designed to stand up to whatever comes down. Whether it's months of baking sunlight and damaging ultraviolet rays, seemingly endless rain or brutal winters marked by ongoing cycles of freezing and thawing. Our Storm Protector Stains are there to ride out the storm.

Storm System

Storm Protector is a Semi-Transparent penetrating stain and sealer meant to protect and highlight the natural beauty of the wood grain.

Penetrates Deep into the Wood Grain

Storm Protector penetrates deep into the wood for added protection against Mother Nature.

Compatible with Most Wood

Storm Protector is compatible with any wood species including: Redwood, Cedar, Pine Douglas Fir, Spruce, Cypress, Mahogany, and Pressure Treated.

EASY APPLICATION

LONG LASTING BEAUTY

PERFECT SOLUTION FOR DECKS AND RAILINGS

Product description

Thompson's Water Seal waterproofing stain - transparent provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this product be applied with a pump sprayer
Answer:	I used a pump sprayer with no problems.
Question:	What size is this product
Answer:	Mine came in a Gallon can
Question:	Can this be applied by roller please and thanks
Answer:	Yes, I applied mine with a roller.
Question:	when should i repeate? 1 year 2year
Answer:	The first application was to a rather long ignored deck, say 5 or so years. I am about to redo it this spring, less than two years later. No idea of how long it will hold on what had been a very thirsty deck, but I hope two to three years.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.

User questions & answers

Question:	Will this peel, flake off after 2 - 3 years
Answer:	I don’t know, I just completed my application to my decking and wood fence about 6 months ago and so far they both look great. I don’t think this product will flake or peel off because is a stain but I think is best if you contact the manufacturer and see what they will advise you. So far under the Phoenix Sun I can see a little fading but I will reapply again in about a year or so. Thanks for the question, Jorge
Question:	Can anyone share what their decks looked like one year later using this product
Answer:	I‘ve used this stain for many years on my decks. I’ve restained the horizontal surfaces every other year, the vertical surfaces every 5 years. I just completely stripped old twp stain off of my deck this spring and stained it in May with one coat of Ready Seal. I thought I probably needed two coats since it was the first staining of a clean deck, but waited to see. It faded quite a bit (not surprised) and I added a second coat earlier today. Based on past experience, I expect this to hold its color well for a couple of years, then I’ll hose it off (not powerwash) and add another coat on the horizontal surfaces in 2 years, and I’ll do the same on the vertical surfaces in about 5 years.
Question:	can this be used on wooden playsets/swingsets? Is it non-toxic
Answer:	It's used on decks quite a bit and I'm not aware of anybody ever having an issue. It's on my deck and more than one child has crawled around on that without growing a third eye.
Question:	Can someone who purchased the light oak or golden pine color upload a photo to see how it turned out, please? also, the longevity on a fence? thanks
Answer:	Check out pics on the Ready Seal website. Color varies based on wood type. I’m not sure about longevity on a fence, I’ve only used it in decks. With decks I’ve found that after getting the original staining established (two coats for decks in my experience), it lasts for about two years, then I hose it off (not powerwash) and add another coat to the horizontal surfaces. I do the same on the vertical surfaces about once every 5 years.

Product description

Provides complete outdoor wood protection. This solid exterior wood stain adds the most color to the surface and shows the least wood grain. Available in several beautiful deck stain colors.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this be applied to damp wood? How would it be on raised garden beds
Answer:	I wouldn't recommend it. Even applying to untreated bare wood it started peeling and flaking after less than one year. Damp wood would certainly lead to bubbling before long.
Question:	Is this solid, or semi-transparent? Title says solid. But description and product image show semi-transparent
Answer:	Solid, worked nice but had to put two coats to really cover good.
Question:	So is this 1gallon or 16 gallons? I’ve seen a similar question but I wanna be sure
Answer:	One (1) gal. 1-gallon.
Question:	In the description, it says 16 gallon. What size is it
Answer:	I got 16 gallons! It took 3 UPS guys to deliver it to me. Cheaper than drinking water!

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Thompson's WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Use on decks and fences, outdoor furniture and exterior wood. Shows medium wood grain and medium color. 1-coat protects 4 years on decks or 6 years on fences and siding. Applies to freshly cleaned damp or dry wood. Prevents water damage. Advanced polymers provide fade resistant color. Coating resists mildew and UV damage.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	The listing says semi-transparent, but the picture says transparent, which version is this
Answer:	Semi
Question:	Is this a gallon container of the product
Answer:	Yes this is a one gallon of Thompson water seal
Question:	what clear seal do you recommend to use on 12year old pressure treated planks
Answer:	I've used Thompson's water-based semi-transparent stain/sealer 3 times now for my 15 year-old pressure-treated deck and it has always done a great job of covering and protecting the wood. It doesn't really last the 4 years they claim, but still very good. They also make an oil-based clear sealer and I use that on my cedar pergola, also very good stuff but it's hard to work with because it doesn't cleanup with water. As an alternative to the oil-base they have an all-purpose water-based clear sealer for wood and masonry. I would use that on my pergola if it was made of pressure treated wood, but with cedar I really want a penetrating oil. So for your pressure treated deck, I would recommend the water-based clear sealer. Given how well the semi-transparent stain has worked for me, I would expect good results with the clear as well. You will certainly want to clean the wood first if you expect to brighten the gray appearance of aged wood. I spray oxygen bleach on the wood first and then scrub with a stiff brush and rinse before sealing.
Question:	Would this product work well on untreated Adirondack furniture
Answer:	Yes, I think it would be suitable. I have only used it on my deck however. Good protection in a wet climate. Rub it down well after it dries to keep the color from getting on clothes though if you're using a color stain.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

• WATER-BASED SEMI-TRANSPARENT WOOD STAIN – This environmentally friendly, water based deck stain allows the wood grain to show through with a beautiful semi-transparent, natural matte finish. It's great for staining wood decks, fences, siding, playsets, outdoor patio furniture, and more.
• FORTIFIED WITH ZINC NANO-PARTICLE TECHNOLOGY– It’s like sunscreen for your wood. Tiny zinc particles dispersed throughout the stain reflect damaging UV rays, preventing premature graying and color loss.
• EXTREMELY DURABLE, QUALITY THAT LASTS – DEFY Extreme wood stains are made with the highest quality resins available that have better resistance to fading and darkening. The result is a quality semi-transparent deck stain that typically lasts a season or two longer than competitive products. Keep your deck, fence or siding looking great for longer by using DEFY premium wood stains.
• EASY TO MAINTAIN – When it’s time to do a maintenance coat, there’s no need to sand or strip the surface again. Simply brighten the wood with DEFY Wood Brightener and apply a single maintenance coat of DEFY Extreme Wood Stain.
• 250 VOC COMPLIANT - Ships to all states except California. California residents can purchase DEFY Extreme 40, which is VOC Compliant in California.

User questions & answers

Question:	will this work in paint gun
Answer:	yes it will, that's how I applied it.
Question:	Will be applying to white cedar fence. How dry does the wood have to be
Answer:	I did not heed the "one year" to dry on the new portion of my deck. Did old and new at the same time when the new portion was perhaps 2 months old. There was a definite difference. I washed and brightened both. Also did two coats. The 2nd coat was done while the first coat was still wet as per instructions. Also brushed vs. rolled. The stain seeped into the older wood much better and the color is richer. Don't believe the stain will last for years. In covered areas yes, it does. But my deck area that gets full S.Carolina sun, does not last the year. I re-stained last year and will be doing a layer of water proofing on horizontal surfaces this year in hopes that I won't have to stain again for a while. I am still happy that I bought the water based just because of the clean up and the ease of re-staining even if I feel I had to do it much quicker than if I had used oil based.
Question:	Can I use this on my new cream colored bamboo blinds? Unsure about the method they were colored, but almost no sheen. Want stain protection in kitchen
Answer:	Hard to say without looking at the wood , but if the wood still looks porous enough we're the Stain can soak in some I would think a light coat possibly 2 would do it. It's very thin milky color but dries clear
Question:	I am applying this to a fence. Would you recommend it for fences? Also, if you have used this product how well is it holding up
Answer:	Using it for 10 years, great on fences. Apply W weed oil sprayer. Brush W 4" throw away brush as needed. Time between coats varies W the look you want. 2-3 years looks great. At 5 years fading is noticeable. Apply when cool. Dampen surfaces to get soak in.
Question:	Can I use this on kitchen cabinets made with walnut veneer? My goal is to keep the natural raw, light look but also see the grain, not milky
Answer:	No, don’t use on kitchen cabinets. Instead use water base polyurethane. Easy clean up and is just as good as oil base polyurethane.
Question:	Can this be used to seal laminate flooring
Answer:	It is not for interior use. Also you cannot stain , paint or varnish over Seal-Once products. Seal-Once must be applied to raw wood.
Question:	Can this be used over an oil base stain
Answer:	No.
Question:	What’s the best product for Douglas fir pergola
Answer:	No, this Seal Once product is not made for pergola floors, it has a dull finish. Not shiny. I would think you would want a poly eyrthane, which is durable and has a shine, recommend a semi-gloss. I would suggest you go to Sherwin Williams and consult their opinion.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the DEFY brand, SaverSystems also manufactures ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

We know you’re tired of the long arduous process of staining and sealing your deck, every single year. It used to take forever on your hands and knees with handheld paint brushes, brushing up and down, left and right. Say no more! Introducing the Precision Defined Ultimate Deck Brush, the most durable, professional quality brush for staining, sealing and painting your deck, patio or porch.



Gone are the days of crawling on your hands and knees getting every wood crack come spring. Instead, simply screw in a long paint brush extender with the PD deck brush and stain away! Get the job done 2x faster while at the same time saving your back and knees.



With your Precision Defined Deck Brush, you can use both water and oil based paints, stains, and sealers; including very thick desk restore paints! That’s not all – you can use your Deck Brush to seal concrete, pavers and brickwork with your favorite sealer and paints.



Built with heavy duty bristles and natural wood enclosure, the deck brush will be your best tool to get those decks done in half the time it used to.



Precision Defined 7-Inch Deck Brush

• Finish quicker get the job in half the time with the ultimate deck brush
• Versatile for use with paints, stains and sealers on a variety of surfaces ranging from wood to concrete
• Universal pole threads to fit most paint extension poles, utility poles and flow-thru extension poles
• Easy to clean after every use. Note, if using an oil based stain, paint or sealer, use a paint solvent or mineral turpentine to get rid of the oil-based liquid. Use a metal comb to loosen the fibers back up after every wash

Technical Specifications:

• Deck Brush: 7" Wide × 2" Thick
• Long Bristles and attaches to extension pole (not included)

• ✅ FINISH QUICKER AND SAVE TIME: The only time your honey asks you to finish quicker - get Precision Defined Ultimate Deck Brush to finish staining your deck, patio or porch in record time. Easily coat each wood panel with a wide 7-inch brush applicator in one simple sweep.
• ✅ VERSATILE FOR PAINTS, STAINS, SEALERS: Universal application for paints, stains, waterproofers, and sealers for both rough and smooth surfaces. The bristles are firm enough to be used on a natural wood surface and even hard enough to be used on concrete floors. These bristles have a long life with good care after use.
• ✅ UNIVERSAL THREAD: Compatible with most paint extension poles, utility poles and flow-thru extension poles, the deck brush was made for universal application. The brush was designed for most household brooms and paint extension poles - so you can easily grab what you have to get the job done fast.
• ✅ DURABLE, PROFESSIONAL QUALITY BRUSH: Durable deck brush that is built from the ground up with high quality materials. From the natural wood brush head to the firm bristles doing the brushing, each deck brush goes through rigorous testing before sending it off to you. No bristles shedding. No replacement pads. We know getting that job done is priority #1, and the deck brush quality is no exemption. Feel the professional quality difference and see how durable this brush will last.
• ✅ GUARANTEE: At Precision Defined, we stand behind our products. We’re so confident that this 7-Inch Deck Brush is better than any you can find in your local hardware store that we offer a full guarantee. Even if you start your project and dislike the brush while staining, we’ll make sure to get you a replacement or refund so you get your project done right.

User questions & answers

Question:	Will this work with super thick deck stains? the deck stain i'm using is so thick i can't get much on a roller. the stain can fill upto 1/4 inch crack
Answer:	I’m sure it will not work. It works great on oil stains, which are thinner than paint, more like water. If you are using Behr Deckover I would seriously encourage you do some research - that is notoriously hard to apply successfully (think class action lawsuits). Good luck.
Question:	What is the difference between this product and Deck Boss
Answer:	I’d say price? I have this one and it works great! I’d definitely save the extra$$$ and go with this
Question:	Would this really work for solid color deck stain or is it meant for thinner transparent stains
Answer:	This product, will work for both. It is also easy to clean.

Product description

The Perdura DECK BOSS professional deck stain brush applicator cuts your coating time in half. (pole not included)



Professionals report savings of over $150 on one standard sized deck stain project which is about triple the cost of a DECK BOSS.

This means purchasing a DECK BOSS is the best investment you could make and a must have product for any professional or DIY customer.



Buy a DECK BOSS today, use it and you will understand why Perdura Pro Series Brushes are the best deck stain tools on the market today!



Perdura Pro Series DECK BOSS is an Australian brand and our business focus is simple, supply the best quality brushes on the market while giving the best customer support and service.

Perdura Brushes are sold in many countries around the world, are loved by professionals and have a strong following with customers who are focused on quality and performance.



The DECK BOSS is the ULTIMATE tool for coating or staining large areas FAST! You can load up lots of paint, stain or oil with the 7 x 2 inch design which has a 3 inch filament length.



The DECK BOSS will outlast other brushes on the market and will save you lots of money when compared to deck stain/paint pad application tools.

Pads and rollers are a throw away item whereas the DECK BOSS just requires a simple clean and can be used again and again.



Quality never goes out of fashion so choose Perdura for better value and results!

• ✅ FINISH your DECK STAINING in HALF the TIME and SAVE YOUR BACK in the process - The DECK BOSS is FUN to use and the PROVEN PERFORMER in the U.S. professional deck staining market. - Load up, back brush and coat between cracks in the one action - SUPER FAST application of all paints, stains, sealers to rough or smooth surfaces. (pole not included)
• ✅ PROFESSIONAL MONEY MAKING MACHINE - In the hands of a Professional, the DECK BOSS will save lots of time while providing a higher level of finish. This means more money in your pocket and is an absolute weapon that all Professionals and DIY's should have at home or in the van.
• ✅ #1 RATED DECK STAIN/PAINT BRUSH ON THE MARKET - A must have coating tool for any professional or DIY - See what our Professional and DIY customers are saying about DECK BOSS from the reviews.
• ✅ LOVE the DECK BOSS or return it - Try the BEST RATED Deck Stain Brush on the market 100% RISK FREE - We are so confident this will be the BEST Deck Stain brush you have ever used and will want to tell everyone about - We also provide the Perdura 100% QUALITY ASSURANCE - Superior build - long lasting custom Australian design built to last - Makes a great X-Mas, Birthday, Fathers Day or any day gift for the professional or DIY. (pole not included)
• ✅ FREE BONUS CASE, Brush Comb and Can opening Keyring - Your DECK BOSS pack comes in a hard protective box that looks great and can be used to store after use. We also include a handy DECK BOSS brush comb and can/bottle opener keyring.

User questions & answers

Question:	Can i use a clear deck sealer with it
Answer:	Yes you certainly can! You can use any paint stain or sealer both water and oil based, clear or with pigment for rough or smooth wood surfaces and concrete applications. All the best from Perdura Brushes Australia!
Question:	I will need to get a handle – do you have any particular one to recommend? One more question – I will be using stain that contains oil, what is the be
Answer:	I just used a handle that was on a floor broom/mop.
Question:	Will this work on railing, or is it too large
Answer:	The DECK BOSS is too big for working on rails so for this application, we recommend using the smaller RAPID STAIN brush which is 5 x 1 inch and designed for hand use. Best regards, Perdura Brushes Australia
Question:	What poles do I need to purchase for it
Answer:	The DECK BOSS has a universal thread so will be compatible with most paint poles and even household brooms. It's highly likely that most customers will already have a pole that will fit in their broom cupboard or shed. For professional use, we use a light weight pole with a length of 5-6 feet. Best regards and feel free to contact us again with any further questions.

• Specially Formulated to be Applied Around & Over Fresh or Salt Water
• Water-based, Low VOC, Non-toxic; Safe for People, Pets, Plants & Marine Life
• Superior Nanotechnology Penetrates Deep, Coating Wood Fibers at the Cellular Level
• Performs like an Oil-Based Sealer Without any Harmful Chemicals or Side Effects
• Creates a Flexible, Breathable Barrier that Enhances, Stabilizes & Protects Wood

User questions & answers

Question:	How do appy on a cloudy day in the tropics ? A cloudy day here means.............it's going to rain . How critical is this
Answer:	how long does it take to dry in 70 degree dry sunny weather
Question:	Can you use a regular wood stain after applying
Answer:	Yes the clear MARINE can be painted or stained. Or you can purchase a tint for SEAL-ONCE and use the MARINE as a sealer and stain. MARINE Features: • Clear formula can be painted or stained after treatment • Tinted formula provides additional UV protection • Available in 11 semi-transparent tint colors • Eco-friendly, Non-toxic; will not harm pets, plants, people or marine life • Ultra-low VOC, Water based • Can be applied around or over fresh or salt water • Flexible, breathable barrier, Stabilizes & protects wood • Prevents warping, cupping, wood rot & decay • Resistant to salt water spray • Prevents mold, mildew & algae growth • Soap and water cleanup
Question:	I want to use this on a 6x6 wood beam at the opening to my walk-in shower (floor to ceiling). No direct shower spray. Will this seal it
Answer:	Yes you may use it for this specific application. As suggested in a comment down bellow, you would want to make sure that it is fully cured before using the shower. Typically it would take 48 hours to cure but it may take longer depending on the environment.
Question:	Can it be used on green treated lumber
Answer:	Pressure treated lumber has to be dry.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, MARINE creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment, easier to apply than solvent based wood finishes and clean up with soap & water. They do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated, but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight. Clean-up brushes or sprayer with warm soapy water.

Choose from 11 Wood Stain Tints

MARINE can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.