11 best wall scanner

• The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Is there an instruction manual online? I misplaced the manual that came in the box
Answer:	Si puede solicitar un manual de instrucciones en [email protected]
Question:	Will this locate studs behind bathroom tiles
Answer:	If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom.
Question:	Is the battery included
Answer:	No the 9volt battery is not included.
Question:	Can this detect a stud behind plaster walls
Answer:	This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc

Product features

Stud Scan Detection

Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Live AC Wire Detection

AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.

Bosch’s GMS120 digital multi-scanner provides detection of multiple materials, including wood, metal, and live wiring. Because of its versatility and consistent performance, it’s an ideal tool for construction, electricians, contractors, carpenters, masons, plumbers, and others who need reliable detection.

GMS120 Digital Multi-Scanner At a Glance: Three available modes: wood, metal, wiring Automatic calibration, automatic center finder Detect steel at up to 4-3/4-inches deep in concrete Illuminated display for mode, detection strength, and more Audible detection signal with an on/off button

Bosch’s GMS120 digital multi-scanner has three detection modes and a bright LCD display (view larger.)

Consistent Material Coverage

With its three modes, Bosch’s GMS120 digital multi-scanner is an aid in most situations, as its modes cover wood studs, metal objects such as rebar, studs, and steel/copper pipes, and live wiring. It has precise automatic calibration that makes use easier and an automatic center finder, which pinpoints the center spot of the wood or material that has been detected.

Deep Detection

The GMS120 has a deep metal detection feature, which allows a user to detect steel that is placed up to 4-3/4-inches (120 mm) deep in cured concrete. It has a maximum detection depth of up to 2 inches for live wiring, up to 3-1/8 inches for copper, and up to 1-1/2 inches for wood studs.

User-Friendly Features

Bosch’s GMS120 digital multi-scanner provides an illuminated ring that indicates detection status and an audible detection signal with an on/off button. Adding to the user-focused design, its bright and readable illuminated graphical LCD display indicates mode, detection strength, and more, making it simple to check the detection device and switch modes and tasks. In addition, its ergonomic soft-grip provides a comfortable grip that’s secure and safe.

Dimensions and Warranty

The Bosch GMS120 digital multi-scanner measures 10-1/4 inches by 3 inches by 6-1/2 inches and weighs .6 pounds. It comes with a two-year warranty.

What's in the Box

One Bosch GMS120 digital multi-scanner, hand strap, one 9-volt battery, and carrying pouch.

Bosch’s GMS120 digital multi-scanner detects multiple materials, has a user-friendly design, and easy detection status checking (click each to enlarge).

From the Manufacturer

Bosch GMS 120 professional multi material cable detector, complete with protective bag. The most convenient multi-functional scanner for construction applications. Includes: hand strap, 9-Volt battery and carrying case.

• Detection: The Bosch GMS120 Digital Wall Scanner features multi mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring
• Performance: Features the latest 3 sensor laser technology, offering a wide range of detection performance of up to 4 3/4 Inch deep in cured concrete, up to 2 inches for live wiring, up to 3 1/8 inches for copper and up to 1 1/2 inches for wood studs; The accuracy of the product is 0.0625
• Self calibrating: Includes 3 selection modes for wood, metal, and AC wiring; The GMS120 offers automatic calibration from the start and continues to self calibrate through the course of the project for easy and precise detection
• Display: Features an illuminated graphical LCD display to indicate mode, detection strength, and more; The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range
• Center Finder: This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button

User questions & answers

Question:	Does it scan through stucco
Answer:	I have not checked metal consume but it has metal detecting which you may use
Question:	Can this detect rafters through asphalt and/ or metal roofing
Answer:	The only requirement is good batteries. The unit worked well for me for installing a grab-bar in my walk-in shower.
Question:	Does the GMS120 detects water pipers hidden in concrete
Answer:	Yes. If she is a steel stud or a wooden stud.
Question:	Does anybody know if the Bosch GMS 120 is exactly the same as the one sold in Germany. I need it to detect power supply lines (230V) and water lines in brick walls 50mm deep. Anybody has any info if these are made specifically for the US market
Answer:	Hi there, Thanks for getting in touch. Please contact us for more customer support via email: [email protected]; phone: 1-8335065666. Best Regards, Customer Service

Product features

GMS120 Digital Wall Scanner

The Bosch GMS120 Digital Wall Scanner features multimode detection capability. The tool is able to detect wood studs, metal objects or live wiring in floors and walls, so users can figure out what they are up against before they start a job. It has a deep detection mode for pipe in concrete of up to 4-3/4 inches. Because of its versatility and consistent performance, it's an ideal tool for construction, electricians, contractors, carpenters, masons, plumbers, and others who need reliable detection.

Includes

digital wall scanner, hand strap, 9-volt battery, carrying pouch

Multimode object detection

The Bosch GMS120 Digital Wall Scanner features multimode detection. The user can find wood studs; metal objects, such as rebar, metal studs or steel/copper pipe; or live wiring in floors and walls. To remove worry, the scanner self-calibrates once the user starts detection and continues to self-calibrate during detection.

Informative graphic display

The backlit graphical display on the scanner indicates mode, detection strength and more. The tool provides easy-to-view and understand information. The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range.

Deep detection

The Bosch GMS120 has a deep metal-detection feature, which allows a user to detect steel that is placed up to 4-3/4 inches deep in cured concrete. It has a maximum detection depth of up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs.

Center finder

The Bosch GMS120 Wall Scanner includes a center finder that pinpoints the center of an object. It includes a convenient marking hole for easy reference marks, and audible detection signal that switches on and off. It also has an ergonomic soft-grip that's comfortable to use.

The Job Just Got Easier

With Bosch laser technology, users are able to be more productive and more profitable – with greater accuracy and precision on the job site. By offering an extensive range of line lasers, laser measures, rotary lasers, point lasers, digital levels, optical levels and measuring tool accessories, Bosch is able to provide solutions for a wide variety of applications. With Bosch measuring tools users are able to work smarter, not harder.

Product description

The world's best stud finder has now gotten even better! Now supports Lath and Plaster with new smooth scanning strips and enhanced product casing. The Walabot DIY Plus detects metal studs, wood studs, wires, pipes and can show movement behind walls. The Walabot DIY Plus can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for DIYers and those who want real-time visual images of what is hidden within a wall.

• See it, don’t hear it! Use cutting-edge technology to see clearly inside your walls. Don’t just rely on a ‘beep’.
• See wooden studs, metal studs, pipes and wires.
• See movement and locate pests inside walls.
• Works on drywall and lath & plaster walls.
• Detects up to 4 inches (10 centimeters) into your walls.
• Automatically finds and shows the center of the stud.
• A mobile app offers continuous upgrades and feature improvements.

User questions & answers

Question:	does it work with a galaxy s
Answer:	AN SAE MEASURING WHEEL. I HAVE BEEN USING THIS DAILY OVER THE LAST TWO YEARS FOR FUMIGATION ESTIMATES. VERY WELL CONSTRUCTED AND ACCURATE.
Question:	Is it true that the app forces you to enter your google account and PW, to share your data with foreign companies, or else you cant use it
Answer:	The weight of the unit itself is approximately 4 pounds, 3 ounces. If you have any additional questions, please call our customer service team at 800-345-3766. Thank you!
Question:	Does it work through tile
Answer:	The metric version of this wheel is also available. It is the RRT12M. We also offer this is 10ths, which is the RRT1210.
Question:	What is the difference between Walabot and walabot plus
Answer:	Yes but product no well built

Product features

The Walabot Difference

See it, don’t hear it! Other stud finders beep to alert you that an object has been found behind your walls without showing you whether the object is a stud to drill into or a pipe or wire to avoid? Now you can be safe with the Walabot DIY Plus. Only Walabot uses cutting-edge radar technology to allow your smartphone to show you actually what is behind your walls.

Walabot DIY Plus Wall Scanner

Walabot DIY Plus is paired with an Android phone (see specifications for details) to produce a visual image of what is inside drywall and lath & plaster up to 4 inches (10 cm) deep. Your Walabot detects metal studs, wood studs, wires, pipes and can even find pests by showing movement behind walls. Walabot can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for ambitious DIYers and those who want real-time visual images of what is behind a wall. It can show users what is in their wall in multiple modes (Image mode and Expert mode).

Image Mode: A visual image of metal and wooden studs, pipes, and wires.

To use image mode, hold the Walabot against the wall, calibrate and scan the wall. Walabot’s Radio Frequency technology will analyze the objects and using artificial intelligence, translate the results into images which are identified as wooden studs, metal studs, pipes, and wires.

Expert Mode: See the raw radar signals from the Walabot sensor

To use expert mode, hold the Walabot against the wall, calibrate and move over the objects seen in Pan and Image mode. Expert mode gives a direct view into the unfiltered Radio Frequency images. This image can show location in more detail, curves in pipes and wires, the intersection between two objects, pest movement in real time and can be used to confirm objects found in Pan and Image mode. You can focus the expert mode by managing the intensity bar to better see the objects.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• 【RESPONSE TIME: 0.1 SECONDS】 Convenient and fast temperature measurement in 0.1 seconds when up to 15cm away from the thermometer, with the accuracy tolerance being ±0.6°F.
• 【TEMPERATURE VOICE PROMPTS】 The human voice alert mode will announce the value and normality of the temperature readings. Press and hold the set key to toggle between voice temperature alert or beep temperature alert modes. The indicator light will indicate if the temperature is high or low by showing a red or green light.
• 【EASY INSTALLATION】 It is very easy to mount on the wall or other surfaces, like glass or wood, using nails, hooks, double-sided adhesive tape, or brackets and can be connected to a wall socket, power bank, or any other portable power source. It also has a tripod socket.
• 【DATA TRANSFERABLE】All Data can be transferred to a computer via the USB cable in real time (PC only). The alarm values can be set on a computer. *To download software that allows you to view temperature data, please see the link in the Q&A section.
• 【RISK FREE】 100% Refund or product replacement if you are not satisfied with this thermometer. We want to ensure you are happy with your purchase with us. Please remove the protective film from the screen before use.

User questions & answers

Question:	I just purchased this, for how long do I have to charge before start using it
Answer:	Yes, the Walabot DIY Plus works with the Samsung Galaxy S10.
Question:	Is this suitable for baby and kids
Answer:	The Android phone will require you to log in so you can get the app from the Play store. The Walabot app does want you to login either by allowing your Google account to connect or you can create a Walabot account. I chose the Walabot account route. As far as to where the data goes I do not know. I do know it's a great product and app and works great. I have the Walabot DIY (not plus) and it is an invaluable tool and works better than much more expensive stud finders.
Question:	What type USB cable does this use and what length comes with it
Answer:	The Walabot DIY Plus is not able to detect accurately through tile at this time. It is an update we are working on for the future.
Question:	Can the temperature data be collected in a text file on a computer
Answer:	The Walabot DIY is able to scan on drywall and solid concrete while the Walabot DIY Plus can also scan on those surfaces it has been optimized to also accurately scan on lath and plaster. Additionally, the Walabot DIY Plus has embedded Teflon strips for a smoother scanning experience.

Product features

Includes

• 1x wall thermometer
• 1x USB cable
• 2x screws and 2x plastic anchors
• 1 Lithium ion battery (18650)
• 2x double-sided tape 1x manual
• 1x manual
• *No power adaptor included
• **To download the software manually, please see the link in the Q&A section.

• This latest stud finder features 5 Modes-- 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; 1 inch scan mode locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inch deep.
• Upgraded Smart Sensor: The stud finder adopts intelligent micro-sensor chip with highest sensitivity, which can detect accurately and quickly
• Digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly.
• Easy Calibrate: :Press the Scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed. Keep tool flat against the wall and do not rock, tilt, or press hard when slowly sliding across the surface being scanned.Once the edge of the stud is picked up, the stud finder will beep. The multi-function stud finder uses state-of-the-art sensor technology to accurately and quickly position rivet wood metal AC wires!
• This stud Indicates the live AC wire in all modes to avoid potentially serious mishaps, let the drill no longer be dangerous. detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	Will this detect Knob and Tube wires
Answer:	No it will not
Question:	where is this made
Answer:	dont know,does not say on product,did not keep box stud finder was packaged in.
Question:	I can’t find my doorbell transformer. Will this help with the drop ceiling in the basement
Answer:	It pinpoints wiring
Question:	Does this work correctly for you? Mine is ~1.5in off from stud's. Not sure if product sucks or mine's faulty
Answer:	I tried mine first on a wall where I knew where the studs were located already and it correctly identified them.

Product features

An accurate stud finder has great help on DIY home Project, No matter whether you’re hanging a picture, mounting a TV or renovating part of your home.

This stud finder features 5 stud modes to meet your multi detection needs. it is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of stud walls, for example, finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.

Stud Scan

This Stud finder has 3 modes to detect wood and metal up to 1.5inch(38 mm), please detect in Stud Mode first to minimize false positives or find other objects further behind the wall that may not a stud

Metal Stud

The metal Stud can be detected in stud scan and deep stud Scan, you need use mental scan to confirm before reading in Stud Scan or Deep Stud Scan was a wood Stud or Mental Stud

AC Wire Scan

In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

Important notice:calibrate it before every scan

Please insert a 9V Battery( not included in package), press Power Button to turn on the tool. put it on the wall where you want to detect, and choose the Scan Mode, then press the Scan Button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed. Note: It is important to wait for calibration to complete(2-3 seconds)

Step 2: Scan the wall

then move the stud finder along the wall slowly, if shake or lift the stud finder accidently, the device needs to re-calibrate.

The narrow on the screen together with the beep signal alter, it means you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud

Product description

A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important.



This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 4 modes to choose,

Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep.

Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep.

Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep.

AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep.



How to use VIVREAL stud finder? Step 1: Press the button at the left side of device to power it.

Step 2: Slide the button on the middle of device to select one scanning mode.

Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.)

Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil.



VIVREAL stud sensor has a beep alarm sound to tell you the “center states”. The directional indicators and the "center" signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen.



If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.

• Safe and Reliable. VIVREAL is committed to developing the reliable stud finder and helping you detect the hazard. No more worries about the annoying little things during decoration with the help of this stud finder. VIVREAL stud finder can help you find the edges and center of the objects easily and quickly. This wall scanner can detect the Live AC Wire in all modes. Our advanced technology enables accuracy detection to protect you from danger.
• Four Scanning Modes. VIVREAL stud finder provides four scanning modes. Depending on the tasks you have, you can switch to the desired mode. The stud scan is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep; Deep mode can be used for scanning walls for 1 1/(2 ) in (38mm) deep; Metal mode locates and detects metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC scan locates live AC wires up to 2 in (51mm) deep.
• Graphical LCD Display.This multiple-function wall scanner detector has a graphical LCD display, which indicates many cues during detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. The low battery Indicator icon displays when the battery level is getting low, reminds you to replace a brand new 9-volt battery in time.
• Sound Waring.VIVREAL beam finder offers the beep alert. When you detect an object, it would beep continually. The loud sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen. You can use the pencil to point to the location of the object. The audible and visible cues reliably keep users informed when an object, such as metal, studs, AC live wiring is found.
• Simple and Fast.The stud finder wall scanner can quickly find the edges and center of metal studs, pipes, rebar, joists behind walls, floors, and ceilings as well as the live AC wires. Fast detection saves users time and efforts, making the task easier. The button on the middle of the body is used for selecting from four scanning modes. The other button on the left side is to help you easily read the information on LCD screen and quickly detect the objects behind.

Product features

Metal Scan Detection

The STUD mode relies on density changes to detect, so it cannot be judged whether wood or metal is measured. Therefore, after using the Stud mode to find the subject, then adjust to the Metal mode to verify again. So in this way you can judge whether wood or metal is detected.

AC Wires Detection

Scan up to 2 in. (51mm) deep. For safety, in all modes such as wood stud finder, this wall scanner always detects and indicates the live AC wires. When live AV voltage is detected, the AC warning indicator will illuminate and protect your safety.

Stud & Deep Detection

The stud mode can scan studs behind the wall up to 3⁄4 in. (19 mm) deep.This wall scanner also provides a deeper wall scanning mode for 1.25 in. (38mm) deep studs. Both wood and metal studs can be found in deep mode.

• Upgraded 5-in-1 Wall Scanner: M MARSIAN 5-in-1 stud finder provides you with 5 scanning modes. This stud finder wall scanner includes stud modes for locating studs up to 1/2”(13mm) deep, 1”(25mm) deep, and 1 1/2”(38mm) deep, metal scan mode for detecting metal up to 2.36”(60mm) deep, AC scan mode for detecting AC wires up to 2”(51mm) deep.
• LCD Display & Sound Warning - TH570 stud detector is equipped with a LCD screen together with the beeping sound to help you get a more accurate result in both visible and audible way. The bright LCD display allows you to clearly see the reading even in the dark. With the beeping alert, you can be immediately informed when you are getting closer to the detected target. M MARSIAN stud finder also has low battery Indicator, please be aware that 9-volt battery is not included.
• Easy Operation to Save your Time- M MARSIAN stud finder wall scanner allows you to efficiently switch between the five different scan modes within minutes. Even a green hand can easily locate the woods, metal, pipes, rebar, joists behind walls, floors, and ceilings as well as the live AC wires with this stud finder. Hold the scanner and move it above the drywall, it will quickly show you the center and edge of the object.
• Auto Calibration for More Accuracy- With upgraded digital detection technology, M MARSIAN digital wall scanner can quickly and exactly detect the woods, metal, pipes, AC wires hidden in the walls, floors and ceilings. Auto calibration function excludes the influence of previous readings, providing maximum accuracy and reliability for following detection. Just press the scan button to start calibration and it will complete the moment the beep sound and screen shows disappear.
• Wide Use & Ergonomic Grip Design -This beam finder is greatly user friendly with light weight and ergonomic design for you to comfortably hold it from any angle. M MARSIAN wall scanner can be applied to various wall surfaces, from lath, wallpaper wood flooring, painted walls, acoustic ceiling, etc. It’s the one you need to help you find the exact studs before installing TVs, cabinets, garage shelves in your house or office.

User questions & answers

Question:	Can I move it vertically for detecting? Will it work
Answer:	Sure, just move it slowly.
Question:	If I need to excute the calibrate every time I use it
Answer:	Yes, otherwise you will not get a accurate reading.
Question:	How can I turn off the beep or lower the volume
Answer:	There's no way. The beep is for warning.
Question:	I lost my instruction manual? Can someone upload a photo of the manual
Answer:	Dear Customer, Thanks for getting in touch. There's a PDF manual for substitute, you can contact us via [email protected] for a digital one. For more customer support, please contact us via phone: +1-8335065666(Mon-Sun: 8:00am-5:00pm PST)or via [email protected]. Please do not hesitate to contact us if you have any issues at any time. Best Regards, Custome Service

Product features

M MARSIAN TH570 5-IN-1 Stud Finder

When hanging a new painting, mounting a TV , hammering or screwing things for home decoration.

Are you afraid of leaving irreparable damage on the wall or ceiling and make a loss?

Are you still anxious with no way to find a suitable location for drilling holes?

Do you feel it difficult to avoid touching the hidden water pipes or AC wires under the wall?

One M MARSIAN TH570 stud finder, no worries about these annoying little things in home decoration.

Five Scanning Modes

Stud Detection

M MARSIAN stud locator has 3 stud scan modes. The stud mode can scan studs behind the wall from 0.5 in. (13mm) to 1 in. (25 mm) deep. This wall scanner also provides a deeper wall scanning mode for deep studs up to 1.5in. (38mm) . Both wood and metal studs can be found in deep mode.

AC Wires Detection

Scan up to 2 in. (51mm) deep. For safety, in all modes such as wood stud finder, this wall scanner always detects and indicates the live AC wires. When live AV voltage is detected, the AC warning indicator will illuminate and protect your safety.

Metal Detection

The STUD mode relies on density changes to detect, so it cannot be judged whether wood or metal is measured. Therefore, after using the Stud mode to find the subject, then adjust to the Metal mode to verify again. So in this way you can judge whether wood or metal is detected.

The Stud Finder for you

No matter you are a home-project amateur or professional contractor, TH570 is the best stud finder you are looking for.

Calibrating the Tool

The calibration function provides you a more reliable result for your every detection. To get the maximum accuracy, press the scan button to start calibration and it will complete in a moment.

*It is important to wait for calibration to complete (2-3 seconds) every time.

To provide safety during your operation and avoid the battery getting loosen, the battery compartment on the back is tighten with a screw. Please unscrew the compartment and insert the battery by screwdriver.

* For transportation safety reasons, the stud finder does not contain the battery.

Finding A Stud

Step 1- Calibrate Before Scanning

Selecting the mode, press and hold the scan button (on the left side of the tool) to calibrate. Wait for the reducing bars disappeared and beep to confirm that the calibration is complete.

Step 2- Move It to Scan the Wall

Press the button and slowly slide the scanner across the wall. The progressing bar on the screen changes as the beep signal guides you to the location of the stud.

*If you shake, tilt or accidentally lift the scanner, you will need to recalibrate the device.

Step 3- Find out the Location of the Target

If the signal bar is full and the beep is loud, pointed arrow on the top of the bar shows you the center of the object. You can mark out the object according to the center and width shown on the screen.

*You can choose the METAL mode to check whether it is wood, metal, or pipe.

• 【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
• 【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
• 【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
• 【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
• 【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
• 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.

Product features

Scanning for wood studs

• Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
• Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.

Scanning for metal objects

• Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
• When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.

Scanning for wires

• Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
• The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.

How to find the stud

• Hold the tool straight up and down, position it onto the surface to be scanned, and do not rotate the tool.
• Press the mode button briefly to enter the wood stud detection mode, the symbol will flash on the screen. Do not move until the symbol stop flashing and the green light is on, automatic calibration of the tool is completed.

Step 2

• Move the tool uniformly and slowly over the surface without lifting it off or changing the applied pressure. During the scan , the tool must cling the wall, otherwise it will automatically calibrate again. Please wait for the symbol stop flashing and the green light to light up again and then move the tool.

Step 3

• When the tool comes close to a stud, the scale m and the percentage n will increase, the distance indicator l will appear. As the tool gets closer to the stud, the yellow indicator will light. As it detected the center of the stud, the red light is on.

Step 4

• To make the detection results more reliable, when the center is marked, please slide the tool across the wall again to check if the center is near the location of the highest percentage.

• Complete with the Latest Technology & More Accurate than Standard Stud Finders- MERECE stud finder wall scanner is launched after testing and upgrades for years. This wall detector adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 5 SCANNING MODES UP TO 60MM DEPTH - Merece stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Merece digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Merece has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Will it work on a 2x4 corner stud
Answer:	when I first got the device I tested it and it found every stud (including a corner stud). I have been please with its performance.
Question:	has anyone used it to detect wires and pipes
Answer:	my husband only tried it on the studs, I will get him to try it on the wires and pipes and let you know what the results are.
Question:	Will this product find the location of floor joists through 3/4 inch plywood floor sheathing
Answer:	Yes it does
Question:	Where is this made
Answer:	It is made in China

• 📍【High-Precision Detector】 Quickly locate the stud wood metal AC wire. Wood measurement has two modes to detect depth to the greatest extent: precise mode (20 mm), depth mode: (38 mm); metal measurement mode, which can measure non-magnetic metals: (80 mm) and magnetic metal (100 mm); power cable Mode (40mm).
• 📍【2 in 1 Stud Finder Laser Distance 】 The new measuring device can not only measure metals (steel rods, copper pipes) and cables, wood, etc. hidden under walls, ceilings, floors and gypsum boards, but also measure laser ranging, area. Whether you are a professional, homeowner or DIY enthusiast, you can find great use in this stud scanner.
• 📍【Multi-Function Distance Meter】 This instrument uses laser precision technology as a distance meter, with an accuracy of ±5MM and a measurement distance of up to 40m; it can be freely switched between M / In / Ft; multiple measurement functions Range, distance, length, continuous measurement, Pythagorean method, and 30 sets of data storage functions.
• 📍【Energy Saving and Calibration Function】 The device has an automatic shutdown function. If there is no function within 20 seconds, it will automatically shut down. In addition, the device is powered by a lithium battery. We provide a USB charging cable that can be used multiple times; calibrating before use can provide you with maximum reliability and accuracy.
• 📍 【Mute Setting and LCD Backlight】 Large backlit screen can provide better visibility in dark areas. Using the mute function, you can turn the signal tone on or off as needed. Suitable for libraries, classrooms and other quiet places.

Product features

Locator Specifications

Wood (foreign body): 20 / 38MM

AC cable: 40MM

Non-magnetic metal: 80 MM

Magnetic metal: 100MM

USB charging

Wood Measurement

• Maximum detection depth: precision mode: 20 mm, depth mode: 38 mm. Press and hold the button in the center to switch to precision and depth scan modes.

• The foreign body detection mode detects objects in plasterboard walls, plywood, solid wood and coated wooden walls.

Metal Measurement

• Press the center button to turn on the detection function and press the right button to access the detection metal interface.

• Place the instrument on the surface of the detector and move the instrument left or right in the same direction. When the instrument gradually recognizes the metal object, the metal symbol * appears on the screen and gradually grows as the instrument approaches the metal object. At the same time, the loudspeaker reports "metal". When the instrument is closest to the metal, a central symbol appears on the display.

Power Cable Measurement

• Press the center button to turn on the detection function, then press the right button to access the metal detection interface.

• Place the instrument on the surface of the detector and move the instrument left and right in the same direction. When the instrument gradually recognizes the power cord, the * cord symbol appears on the screen and gradually increases as the instrument approaches the power cord.

Screen Declaration

A: Magnetic / non-magnetic

B: Depth

C: Central location

Single and Continuous Measurement

• Single measurement: Briefly press the "ON" button to switch on the device. The device automatically switches to the individual measurement interface of the laser and the loudspeaker sends the current measurement mode. Aim the laser at the target to be measured and press the button for single measurement. The measurement result is displayed in the main display area and the loudspeaker announces the current value

• Continuous measurement: Long press the "ON" key to enter the continuous measurement mode. The maximum value (Max) and the minimum value (Min) are displayed in the auxiliary display area.

Area Measurement

• Area measurement: Measure the area of a rectangle. Measure the length and width of the rectangle according to the screen mode. The results are displayed in the main display area.

Single Pythagorean Measurement

• Measure one hypotenuse side and the right angle side according to the Pythagorean theorem principle, and the instrument automatically calculates the length of the other right angle side that is displayed in the main display area. Note: When testing the Pythagorean method theorem, the two measurements mean that the reference point of the measurement must remain unchanged and the line between the two laser points and the three reference points must be a right-angled triangle, otherwise the calculation result differs significantly from the actual results.

Double Pythagorean Measurement

• Similar to the simple Pythagorean measurement, when measuring 2 hypotenuse edges and 1 right-hand edge, it must be ensured that the reference points of 3 measurements remain unchanged and the right-hand edge must be measured perpendicular to the target edge, otherwise the calculated results differ significantly from the actual ones Results.