12 best stud finder at lowes

Product description

The Stud Finder -- for Easier DIY Projects Done

Whether you’re trying to hang a painting or mounting a TV in your living room, installinging a pair of shelves in your laundry room, or taking on a serious renovation or demolition project, having a dependable stud finder is going to make the task drastically more manageable.

Features

Detects wood, metal and electric wires & cables.

With a stud finder, you’ll be able to find studs easily without having to play any guessing games.

5 Modes Scanning

Detects wooden beams or joists at 13mm, 25mm and up to 38mm depth.

Detects metal studs, pipes, rebar, aluminum and copper up to 60mm depth.

Detects living electricl wires up to 51mm depth.

Center locating

This is a feature that you really only see in more advanced electronic scanners. Essentially, it'll allow you to determine the center point of the stud through scanning, rather than having to perform your own calculations and hope that the stud size correlates to standard conventions.

Digital display

Features with a digital display that indicates when a stud has been detected, while the altering system will help your confirm the center of the objects being detected.

PACKAGE CONTENT: 

1 * Stud finder 

1 * User manual 

1 * 9V battery 

• 【Accurate and Fast Location】-stud detector wall scanner adopt 2019 Upgraded intelligent micro-sensor chip which can precisely and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.Whether you are a professional, homeowner or a DIY enthusiast,this electronic stud scanner 5 in 1 is a Must Have Device that you Never Knew You Needed!
• 【5 in 1 Multifunctional Plus Deep Detection】-This stud sensor included 5 different scanning modes. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep.Medium scan locates the center and edges of wood and metal studs up to 1 inch deep.Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inch deep.
• 【Simple to Use&Auto Calibration】-Bright, Easy-to-read LCD display and ergonomic anti-slip handle make detecting the target on the wall easily and conveniently. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs very efficiently. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
• 【Digital LCD Display & Audio Alarm】-The wall stud locator has large LCD display together with the big sound warning to detect the accurate location of the objects. When find the target, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER and SAFER.
• 【Wide Use and 24-Month】-The beam finder is the handheld devices widely used for home improvement projects. This electronic stud finder quickly locates wood, metal and AC wires hidden in the walls, floors,lathe and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling,plaster wall,drywall etc,save you to have a potential accident when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	What type of battery does this wall scanner use? And is the battery included
Answer:	Dear customer, thanks for your question. The stud finder can scan through the plaster(about 3/4 inch).
Question:	Can it detect floor joists
Answer:	Dear customer, thanks for your question. The stud finder can scan through the plaster(about 3/4 inch).
Question:	Will this tool detect the location and number of plastic water lines that may or may not be behind a wall
Answer:	No, it calibrated just fine and would find studs as well. my other stud finder verified it. The problem is the battery compartment cover is cheaply made and pops off. I wrapped the damn thing with packing tape and used it anyway.
Question:	Can this device distinguish between metal studs and wood studs
Answer:	Absolutely NOT! Please note that General Tool is a completely different company offering high quality precision tools for a reasonable price.

Product description

The MultiScanner A200 is Zircon’s newest electronic stud finder and metal detector that is sold exclusively on Amazon. The A200 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A200 has a 3-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A200 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A200 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A200 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when scanning in all modes. With the Zircon MultiScanner A200, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon MS A200 is an electronic edge and center stud finder and ferrous and non-ferrous metal Detector sold exclusively on Amazon Wire warning detection indicates the presence of live, unshielded electrical AC wiring while scanning in all scanning modes
• Act (auto correcting technology) automatically corrects common user errors, I.E. When scanning begins over a stud, as the signal strength indicator help distinguish shallower targets from deeper ones
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and metal while avoiding electrical hazards

User questions & answers

Question:	Does this work to detect studs in walls with spray foam insulation
Answer:	Hi. Zircon stud finders and multiscanners are optimized for standard interior drywall construction. Other interior surfaces can be penetrated with our scanners, but brick, slate, and rock type material are too dense. Thanks.
Question:	How is "wirewarning detection" different than "ac scan mode"? both say they find, "live, unshielded electrical ac wires up to 2 inches (50 cm) deep
Answer:	Hi. The packaging you received your A250 in is called "FFP". That stands for frustration free packaging. The other type would be the standard plastic "clamshell". Most folks prefer the FFP. I believe you can purchase the stud finder products either way from Amazon. Thanks.
Question:	does this stud finder come packaged, mine did not is that normal
Answer:	Hello Chris. Due to the variables in building techniques, materials and densities in exterior construction Zircon stud sensors are recommended for interior use only. Our stud sensors locate studs by finding changes in density and the density of the material you mention would not allow the A250 to calibrate properly and as such would prevent it from scanning for the studs. Thank you.
Question:	Will it work with brick walls
Answer:	Hello. The stud finder A250 does not come with a case. Thank you.

Product features

Zircon MultiScanner A200

The MS A200 is a handheld tool dedicated to quickly and efficiently find studs, detect metal and alert you of live AC wiring. The A200 comes equipped with 3 scanning modes: StudScan, DeepScan and Metal Scan.

3 Mode Multifunctional Wall Scanner with Backlit Display

The Zircon MultiScanner A200 makes scanning easy with its newly designed ergonomic grip. The scanner's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep while DeepScan doubles the scanning depth to 1.5 in. (38 mm).

Metal Scan locates both non-ferrous (non-magnetic) metal, such as copper pipe, and ferrous (magnetic) metal, such as rebar. The A200 is able to detect non-ferrous metal up to 1.5 in. (38 mm) deep, and ferrous metal up to 3 in. (75 mm) deep.

The A200 also includes WireWarning Detection that automatically operates in StudScan, DeepScan and Metal Scan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs and metal.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

StudScan and DeepScan

Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Before scanning, hold the A200 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

When the A200 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.

The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will appear when live, unshielded wires are detected.

Metal Scan

Detect Both Ferrous and Non-Ferrous Metal.

Use Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

Metal Scan Mode detects non-ferrous metal, such as copper pipe, up to 1.5 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (75 mm) deep.

To use, be sure to first calibrate the A200. For maximum sensitivity, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration is complete, place against the surface to be scanned. Be sure to continue to hold the Power Button.

Just like in AC Scan Mode, slowly slide the scanner across the surface and mark the spot where the most display bars peak. Continue scanning until the bars reduce and reverse the direction.

The midpoint between the two marks is the location of the metal target.

Note: WireWarning Detection works in Metal Scan Mode. The WireWarning Detection Icon will appear when live, unshielded wires are detected.

WireWarning Detection

Be Alerted of Live Electrical Wiring in all Modes.

WireWarning Detection is a feature that is always on while scanning in StudScan, DeepScan, and Metal Scan Modes.

It alerts you to the presence of live, unshielded electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Auto Correcting Technology (ACT)

Automatically Have Common Errors Corrected.

This feature enables the scanner to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.

This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the scanner was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.

Frequently Asked Questions

Question: Does the MultiScanner A200 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A200.

Question: I inserted a 9V battery, but the scanner doesn't turn on or is giving me strange readings. Is my scanner broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in MultiScanners.

Question: Does this scanner need to be calibrated?

Answer: Yes, as with all Zircon scanners, the MultiScanner A200 needs to calibrate to the surface before scanning. Calibrating the scanner on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A200 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the scanner will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan', 'DeepScan' or 'Metal' will remain, indicating that calibration has occurred and the scanner is ready to begin scanning. It is important not to move the scanner or begin scanning until the calibration process has taken place for the most accurate results.

Question: What does 'Center Finding' mean?

Answer: Center Finding stud finders locate both the edges and the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this MultiScanner A200 locate metal studs?

Answer: Yes, the A200 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan, DeepScan, and Metal Scan Modes, the detector will react to metal studs the same as it would for wooden studs. The A200 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep. In Metal Scan Mode, the detector will only detect metal studs, in addition to any other metal, within its specified scan depth and range.

Question: Why does the scanner beep and the lights flash when scanning for a stud?

Answer: The scanner could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the MultiScanner A200 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan, DeepScan, and Metal Scan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the scanner off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try Metal Scan Mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.

Question: Does the A200 work on wood paneling and other wood surfaces?

Answer: The A200 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This scanner will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A200 work on textured wall surfaces, acoustic ceilings, or wallpaper?

Answer: Yes, the A200 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this scanner to find studs behind carpet?

Answer: No. Zircon scanners are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A200 work on ceramic tile?

Answer: While the MultiScanner A200 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. To find studs through ceramic tile, we suggest using Metal Scan Mode to find the nails or screw heads attaching the backing surface to the studs.

Question: Does this MultiScanner work on lath and plaster?

Answer: Yes. Using Metal Scan Mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, the MultiScanner A200 will not be able to detect an accurate pattern of nail heads through that material.

Question: What does the Signal Strength Indicator do?

Answer: To help you filter out the target from potential decoys that would give the A200 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.

Question: Can I use this scanner to scan the outside wall of my house?

Answer: No. Zircon MultiScanners are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this scanner help me?

Answer: Yes. The A200 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the scanner waterproof?

Answer: No. The MultiScanner A200 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A200, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the MultiScanner A200 come with a warranty?

Answer: The MultiScanner A200 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my MultiScanner A200?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

Product description

Android compatible only - stud finder and wall scanner. Detects studs (metal & wooden), pipes & wires and movement Works on drywall. Sees 4 in / 10 cm deep into your walls Provides 2 different sensing modes – Images and Expert.

• Detects wood & metal studs, PVC & metal pipes, electric cables and wires inside walls
• Uses cutting-edge radar technology to see inside drywall
• Scans up to 4 inches (10 centimeters) deep into your walls
• Works with Android phones running Android 6. 0 and above with USB on-the-go (OTG).
• Not compatible with iPhone and iPads and tablets

User questions & answers

Question:	Where is this product made
Answer:	I don't know the maximum thickness it can gauge, but it is totally Awesome for finding the nails in standard sheet rock thickness. An electrician used it on my walls to find the stud, and it was so effective, that I purchased a set for me. No more random knocking on the walls to find the studs
Question:	Does this case fit the “New” T
Answer:	I have 3/4 inch drywall and it finds the studs really easily, but I don't have carpeting. Guess you should give it a try, can't hurt. If it finds the tacking on the carpeted side walls through your carpet thickness, it might find the joists too! Best answer I can give you.
Question:	Will this fit the M150 series
Answer:	Nothing, I bought it and it was just one magnet. I contacted seller and they said they have only ever sold one at a time.
Question:	What are the inside dimensions
Answer:	Wow, they sure don’t make it very clear. I just one unit, and took about eight weeks to get it. Does work great though.

Product features

Avoid DIY drilling disasters & take your renovation projects to the next level!

Walabot DIY is a cutting-edge wall scanner that takes stud finder technology to the next level. Capable of "seeing" up to four inches into walls, it uses radio frequency technology to provide users with the location of studs, plumbing pipes, electric wires, and other objects hiding inside walls.

The Walabot Difference

See it, don’t hear it! Other stud finders beep to alert you that an object has been found behind your walls without showing you whether the object is a stud to drill into or a pipe or wire to avoid? Now you can be safe with the Walabot DIY. Only Walabot uses cutting-edge radar technology to allow your smartphone to show you actually what is behind your walls.

Walabot DIY Wall Scanner

Walabot DIY is paired with an Android phone (see specifications for details) to produce a visual image of what is inside drywall and lath & plaster up to 4 inches (10 cm) deep. Your Walabot detects metal studs, wood studs, wires, pipes and can even find pests by showing movement behind walls. Walabot can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for ambitious DIYers and those who want real-time visual images of what is behind a wall. It can show users what is in their wall in multiple modes (Image mode and Expert mode).

Image Mode: A visual image of metal and wooden studs, pipes, and wires.

To use image mode, hold the Walabot against the wall, calibrate and scan the wall. Walabot’s Radio Frequency technology will analyze the objects and using artificial intelligence, translate the results into images which are identified as wooden studs, metal studs, pipes, and wires.

Expert Mode: See the raw radar signals from the Walabot sensor

To use expert mode, hold the Walabot against the wall, calibrate and move over the objects seen in Image mode. Expert mode gives a direct view into the unfiltered Radio Frequency images. This image can show location in more detail, curves in pipes and wires, the intersection between two objects, pest movement in real time and can be used to confirm objects found in Image mode. You can focus the expert mode by managing the intensity bar to better see the objects.

Which phones work with Walabot?

COMPATIBLE: Android phones with O.S. 6.0 and above with on-the-go (OTG).

NOT COMPATIBLE: iPhones or tablets.

Once connected to your phone via the included cable, place Walabot DIY against the wall, calibrate and then start scanning to detect pipes, wires and studs. Check the app store for free updates and upcoming features.

*If you are not sure what operating system your Android phone uses or if it has OTG, see the video listed in the image gallery above for a short walkthrough on how to identify this on your phone.

In-Wall Imager – For home remodeling, renovation and construction

Walabot DIY Wall Scanner



The Walabot Multifunction Wall Scanner uses Radio Frequency (RF) technology to provide advanced detection capabilities. The tool is a cutting edge device which is paired with an Android phone (see specifications for details) to produce a visual image of what is inside concrete and drywall up to 4 inches (10 cm) deep. It can show users what is in their wall in multiple modes (Pan mode, Image mode, and Expert mode).



The Walabot detects metal objects, wood studs, wires, pipes and can show movement behind walls. Walabot can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for ambitious DIYers and those who want real-time visual images of what is hidden within a wall.



COMPATIBLE SMARTPHONE

• Most Android phones running Android 5.0 and above, with USB On-The-Go (USB OTG)

KNOWN INCOMPATIBLE SMARTPHONES:

• iPhone, iPads
• Tablets
• Blackberry, Asus Zenfones, HomTom, Vodafone, Kyocera, Alcatel, BQ, Moto, Samsung Note 7, Pixel 2 XL, Xperia and LG G4

 

Cutting Edge Technology Transforms Your Smartphone into an Advanced Wall Imaging Device

Learn to Use the Walabot

Walabot's Multiple Modes Work Together: Pan Mode, Image Mode and Expert Mode

                        Step 1:



Pan Mode: Panoramic view of a full wall line, with distances.



To use pan mode, hold the Walabot against the wall, calibrate and scan from one side of the wall to the other. Pan mode will show an image of objects within the wall and approximately where they are located. Pan facilitates a quick overview of where studs are placed in the wall.



Different>


Each type of object will be defined by the stripes and can be used for future reference in either Image or Expert mode.

• ★【5 in 1 Multi-Function Mode】Compared with other stud sensors, Meterk stud finder not only featuring detection for wood stud exact mode, wood stud deep mode, metal objects mode (iron and non-ferrous metals), copper conductors mode (live), but also detection for moisture in the wood and building materials, offering a wider range of detection performance
• ★【Locate the Center of Stud !】Meterk stud finder can be used to find the center of the stud in just once the operation. When the stud sensor is approaching the center of the stud, the signal strength will increase and accompany the sound. At the center, the center icon "+" will appears and the signal strength shows 100% full on the screen. However, other products need to be operated twice in the left and right direction to find the center by looking for the edge of the stud
• ★【Wood Exact/Deep Mode】Stud sensor can detect metal, wood and live cables in walls, ceilings, and floors. Wood exact mode scans through one layer of drywall up to 0.79 inches (20mm) thick. Deep mode scans through 2 layers of drywall up to 1.50 inch (38 mm) deep. Deep stud scan mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• ★【Convenient Design】Meterk sensor detector has a mute setting, which is very convenient for those who think that the alarm sound is annoying or use it somewhere in the library. This sensor detector has a large LCD display, the backlight function supports to detect studs even in dark environments. Whether you are a professional, a homeowner or a DIY enthusiast, you can find good uses in it
• ★【Make Your DIY Homework Easier !】 This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation. 1 x Meterk stud finder, 2 AAA battery, 1 x portable bag, 1 x user manual, 1 x warranty card( 24 month ).

User questions & answers

Question:	Can this detect roof rafters through roof shingles
Answer:	No dosent work
Question:	What is the moisture detection function
Answer:	It can detect moisture in wood and building materials and provide better service to more DIY workers.
Question:	How about the product warranty
Answer:	24-month warranty and you can contact them if stud detectors have quality problems occur during the warranty period.
Question:	What are the maximum depth of the metal tube and copper conductor
Answer:	copper conductors(live): 50mm /1.97 inch, ferrous metals: 60mm /2.36 inch, non-ferrous metals(copper): 50mm / 1.97 inch

Product features

Step 1

* Short press the power button on the Meterk stud sensor.

* Short press the wood detection mode button to enter the wood stud detection mode, the wood detection mode is the exact model.

* Long press this button to switch to the wood deep detection mode.

(The maximum detection depth of the "exact" mode is a 20mm/0.79 inch, and the maximum detection depth of the "deep" mode is 38mm/1.50 inch).

Step 2

* When the stud sensor starts to approach the stud, it will always be accompanied by a sound, the signal percentage scale on the right side of the screen will gradually increase, and the distance will be displayed on the screen will gradually shorten.

* When the positioning symbol "+" appears on the screen, indicating that the center of the stud has been found, mark it with the pen at the groove.

* Note! At this time, you cannot directly drill in the second step!

Step 3

* Since Meterk stud sensor is looking for a change in density behind drywall, not a particular material. In stud scan and deep scan modes the detector will react to metal studs the same as it would for wooden studs.

* To ensure that the object detected in the second step is a wood stud, switch to the metal mode for testing again. In the metal mode, if nothing happens on the screen, it means that the object found by the second step stud sensor is wood.

* At this time, you can rest assured and start your DIY and drilling work !

Metal / AC Wire Scan Detection - Avoid the Metal / Wire Behind the Wall for Punching

Step 1: When the Meterk stud sensor is close to the metal/wire, the display scale bar on the screen will gradually rise and make a sound, when the distance displayed on the screen becomes at 6cm, it means that the product has started to detect metal. At this time, it should be marked with a pen at this position, and the mark point is "1" (as shown).

Step 2: The stud sensor will continue to move from the marker point "1" position for a distance, and the distance displayed on the screen will be shortened. When the center icon "+" appears on the screen, it represents metal/ The wire is positioned just below the center of the stud sensor.

Step 3: When the instrument is slowly moving away from the object, the display scale will slowly drop and the distance displayed on the screen will become 6cm again. At this position, mark it again with the pen and mark it as “2” (as shown). .

Step 4: There is a metal/wire in the area formed between the marked points "1" and "2".

Note: Before starting the drilling work, you should avoid this area!

Moisture Measurement

• Meterk stud sensors measure the moisture of wood and building materials. If you need to freeze this value, just press the "HOLD" button.
• Wood moisture measurement range: 5%-50%/±2%, building materials: 1.5%-33%/±2%. (There are two test pins at the bottom of the instrument)

Mute Setting

• Press the 1 and 2 buttons at the same time tset the sound to mute. There for people who think the alarm sound is annoying or to use it in someplace like a library.

Make Your DIY Homework Easier!

• This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation.

• 【5 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS05 equipped with five scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm).
• 【PIN-TYPE MOISTURE METER】Prevent water damage to your home. Quickly discover hidden water damage in floors, walls and under carpets. Moisture Measurement Range (wood: 5%-50%, building materials: 1.5%-33%, error range: +/-2%).
• 【AUDIO ALARM】 Audio alarm will be louder while the closer the target is. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
• 【ADDITIONAL HIGHLIGHTING DESIGN】- In/cm units switch by long pressing the ¡°wood¡± and ¡°mositure¡± button together; sound on/off by long pressing the ¡°wood¡± and ¡°metal/AC wires¡± button together; auto shut down after 5 mins of inactivity; self celibration and data hold.
• 【WHAT’S INCLUDED】1 x TACKLIFE DMS05 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.

User questions & answers

Question:	Can anyone compare this to the 4-in-1 version? is it just the moisture meter? it looks like maybe the screen is a little different. better? worse
Answer:	I would think that it would. I would first take one sickness of newspaper to the area to be scanned to have a smooth surface to slide the stud Sensor on. Then, double-click for deep sensing and search for studs.
Question:	Can it find a live wire in wood mode
Answer:	Hi. Powering the unit on is calibrating it. As soon as the "trucal" green LED is lit, the unit is calibrated and ready to scan. Thanks.
Question:	Where can I download a user manual
Answer:	Had no idea, so I just tried it. Sure does. It even found the electrical going to the ceiling fan.
Question:	Is detection reliable through concrete walls
Answer:	Hi Shawna. The Zircon StudSensor Pro SL-AC stud finder requires one brand new 9 volt alkaline battery. For optimal performance, please use a battery with an extended expiration date of at least three years beyond the current date. Thank you.

Product features

5 Scanning Modes Maximum Scanning Depth

The Tacklife stud finder DMS05 has 5 ways to help you detect.

Ferrous metals: 4-3/4˝ / 120mm

Non-ferrous metals(Copper): 3-1/8˝ / 80mm

Copper conductors (live AC):2˝ / 50mm

Wood exact mode: 3/4˝ / 20mm

Wood deep mode: 1-1/2˝ / 38mm

Moisture test pins length: 0.3˝ / 8mm

Step One

• Hold the tool straight up and down, parallel to the studs, and do not rotate the tool.
• Keep tool flat against the wall and do not rock, tilt, or press hard when slowly sliding across the surface being scanned.

Step Two

• Move the detector uniformly over the surface without lifting it off or changing the applied pressure (During the scan, the detector must cling to the wall).
• As the detector begin to approach a stud, the scale h will increase, and the percentage of intensity will also increase, the yellow light will be on.

Step Three

• When the red light is on, the buzzer will sound, the scale and the percentage will increase to the max, the center of stud is located. At this time, make a mark below the top groove of the detector.

1.Ready for metal detecting

• Short press the button on the right side with " 工" shown on the display to enter metal detecting mode (default mode);
• When the detector is far away from the metal, there's with green light on and the signal strength is empty in 0%;
• Move the tool uniformly across the surface

2.Sign the first point

• When the light turns into yellow and the detecting signal strengthen, the detector is close to the metal with a steady tone sound;
• Sign the first point for recording to remind yourself

3.Sign the second point

• As the light turns from yellow/ red to yellow and the signal strength percentage decrease to like the result as step 2，the buzzer will stop sounding;
• Sign the second point for recording as the same as before

4.Get exact position

• Combine the two points from step 2 and step 3 together, make a midpoint to confirm the exact location of the metal;
• Tips for ensuring the materials with magnetic or not: Magnetic / Non-magnetic metal indicator nearby the " 工" will appear

• Reliability and Consistency: 2019 latest stud finder with multi-sense technology which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Whether you’re hanging a picture, mounting a TV, renovating part of your home, Jurgen K stud finder is a must-have tool you need.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. The stud scan features 5 mode: 1/2 inch(13 cm), 1 inch (25 mm) and 1.5 inch (38 mm), Metal scan (60 mm)and AC scan (51 mm). Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowners, and DIY enthusiasts, it must be an ultimate choice.
• High Performance: Easy-to-read LCD screen displaying the desired stud material as well as the precise position of the stud. when the device detects an object, it will beep continually and a peck shape will also display on the LCD screen. This wall scanner features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance (include 9V battery).
• Ergonomic Grip & Auto Calibration: The ergonomic anti-slip grip and top-grade plastic frame provide users with comfort and convenience while scanning. calibration before using provides users with maximum reliability and accuracy. Firstly place it flat on the wall, secondly, turn on the Power Button, then hold the Scan button to start calibration, It is completed when the BEEP sound and screen shows disappear.
• This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors, and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	If there's a live wire, what does that look like on the display screen
Answer:	It couldn't locate studs through an inch of sheet-rock so i would bet no.
Question:	Will the TH530 work on textured wall surfaces, acoustic ceilings, or wall paper
Answer:	Yes, it work well on popcorn ceilings
Question:	I'm planning to mount my new flat-screen TV to the wall. Will this tool help me
Answer:	Yes, i found the wires in the wall with this device.
Question:	Will this stud finder locate metal studs
Answer:	Yes, it is accurate and easy to use. with this stud finder, I was able to install my new TV mount at ease.

Product description

High accuracy: uses 13 sensors to give accurate readings every time; one-step operation: just press the button; when placed on wall LED lights instantly indicate studs; deep sensing: more sensor pad area than other scanners results in deeper scan; triple accuracy technology analyzes and triangulates data from all the sensors for highest accuracy; Built-in bubble level makes this 2 tools in 1!

• Prosensor 710+ professional stud finder with built-in bubble level and ruler
• Small
• Yellow

User questions & answers

Question:	does it detect floor studs under carpet and padding
Answer:	Scan goes 1.5 inches on deep scan most subfloors are 1 inch plus carpet and pad.....my guess is no. Im guessing you need to add floor outlet. In that case look for hvac vents in floor to show orientation of floor joices. Best thing ive done is drill 1/8 inch hole and put long steel wire down through insulation then go in crawl to see if in between floor joices. Ive seen some electricians just drill it where homeowner wants floor outlet and if they hit joice they just drilled it out and installed floorbox to hide mistake. Most stud finders dont do good on flooring
Question:	Does it work on metal studs
Answer:	Yes.
Question:	Our walls are 3/4 inch tongue and groove. Will this be able to detect through that
Answer:	The ProSensor 710+ should detect through wood tongue and groove walling material.
Question:	will it detect and show studs behind plaster and lath
Answer:	This unit can detect studs through lath and plaster, but it is not guaranteed as it is on drywall. Because lath and plaster usually is usually thicker and less consistent, it could lead to some inconsistent readings. The multiple sensors and deep sensing capabilities on this stud finder give it a better chance on lath and plaster, but it cannot be guaranteed.

Product features

ProSensor 710

Unlike conventional stud finders which use only 1 or 2 sensors, the Franklin Sensors ProSensor 710 uses 13 sensors simultaneously to detect studs. This multi-sense technology eliminates the calibration step other brand stud finders require. Just put it on the wall and press the button. It's quick and easy.

The ProSensor 710 can detect multiple studs simultaneously. It accurately displays the center and edges of a stud at the same time.

Product description

Upgraded 5 in 1 stud finder from JAXWQ provide users with more wider detect performance, more accurate and deeper detect range.



1.Feature:

Ergonomic anti-slip handle provide comfort and control of the tool.

Intelligent Microprocessor chip, get the most accurate and fast results

HD graphical LCD display Audio Alarm

Auto-calibration function to provides users with maximum reliability.



2.How to use JURGEN K stud finder?

Step 1: Calibrate the tool before every scan

Choose the scan model at first, then place unit flat on the wall, press the power button to power on, press the Scan button(on the right side of the tool) to start calibration. Wait for the reducing bars disappears and beeps to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ; In AC/Metal mode, put it in the air to calibrate it.

Note: It is important to wait for calibration to complete (2–3 seconds) every time.



Step 2: Start to scan

After Calibration, then moves the stud finder along the wall slowly, The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.

Note:

1. if shake or lift the scanner coincidentally, the device needs to be re-calibrate.

2.if you can not scan the object from left to right, please try to scan up and down.



Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud.

• Accurate and Rapid: The stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; medium scan locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inches deep.
• Digital LCD Display & Audio Alarm: This stud finder comes with large LCD display and sound alarm, which can detect the exact location of the objects. When find the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. This LCD also features back-lit function which can provides a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication ect.
• Easy to Use & Auto Calibration: Easy-to-read LCD display and ergonomic anti-slip handle provide users with comfort and convenience while scanning. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs in one step. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
• Wide Use: This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	Can this unit locate studs through ceramic tile
Answer:	Yes, its accuracy left a deep impression on me.
Question:	Will it work on popcorn ceilings
Answer:	Yes, I successfully found the stud behind the wall.
Question:	Is it able to detect live wires in the wall
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Please choose the mode you need, follow the instructions, super easy to operate.
Question:	Is it accurate
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes

• ➤The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes, fire lines, studs, wooden frames, steel bars and supporting beams hidden behind walls, floors and ceilings. Whether you are a professional, homeowner or DIY enthusiast, you can find a good use in this electronic screw scanner
• ➤The wall scanner includes five different scanning modes, suitable for metal tubes, fire lines, studs, wooden frames, steel bars and brackets, as well as ceilings, deep embedded objects behind walls. The bolt mode can detect wooden beams and joists in the dry wall, up to 1.5 inches. Metal mode can detect up to 3 inches of pipe. Depth mode detects up to 3 inches of wood and metal components, while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
• ➤Auto-calibration and ergonomic grip, comfortable to use, before testing, please hold down the scan button for 1-2 seconds. Auto-calibration provides maximum reliability and accuracy for users. The ergonomic design of this wall stud detector enables it to be fixed from any angle
• ➤LCD screen upgrade design, display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning, can detect the exact position of the object. When the material is found, the LCD display will beep to tell you if you are close to the target. Fast detection saves time and energy for users and makes task completion easier
• ➤Professional Design with Top Quality - FOLAI has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc

User questions & answers

Question:	Will this work to locate stud, electrical, etc on exterior succo walls
Answer:	Yes.
Question:	You need to select stud size... but what if you don't know what size studs are in the wall
Answer:	The point of the arrow points where the stud is, regardless of the size of the stud.
Question:	will this work through plaster
Answer:	I used it in the bathroom and it worked well, I guess it would depend on how thick the plaster is ... if it works through drywall, you’d think it would work thru plaster
Question:	Does this work on a ceiling
Answer:	Should show studs through dry wall anywhere.

Product features

Stud Scan

We suggest you to use Stud Mode first to find the edges of wood and metal studs up to 3/4 inches (19mm) deep. If Stud Scan mode shows irregular readings or the Signal Strength indicator is weak, the studs might be behind more than ¾ inches (19 mm) of drywall.then switch to Deep Scan mode. This doubles the scanning depth to 1½ inches (38 mm) deep and allows for increased accuracy on deeper targets.

Metal Scan

Use this mode to locate and avoid hazards such as pipes behind walls. Metal Scan mode detects non-ferrous metal such as copper pipe up to 1½ inches (38 mm) deep, and ferrous metal such as rebar, up to 2.36 inches (60 mm) deep. You can differentiate between metal and wood studs through this mode.

First, find the stud in Stud Scan mode. Then, switch to Metal Scan mode, the tool alerts in a pattern as it detects the mental drywall screws in the wood for wooden studs.

AC Wire Scan

In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.

1.Calibration

Place the unit flat on the wall, press and hold the scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed.

2.Moving

Slowly slide tool across the wall. A bottom pointed arrow and EDGE indication will illuminate, indicating location of the stud edge.

3.Find Stud Center

Continue sliding the tool. When the center of a stud is located, the full bars on the Signal Strength Indicator, the pointed arrow on the top of the bars, the CENTER indication will all show and the buzzer will sound.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• 【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
• 【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
• 【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
• 【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
• 【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
• 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.

Product features

Scanning for wood studs

• Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
• Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.

Scanning for metal objects

• Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
• When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.

Scanning for wires

• Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
• The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.

How to find the stud

• Hold the tool straight up and down, position it onto the surface to be scanned, and do not rotate the tool.
• Press the mode button briefly to enter the wood stud detection mode, the symbol will flash on the screen. Do not move until the symbol stop flashing and the green light is on, automatic calibration of the tool is completed.

Step 2

• Move the tool uniformly and slowly over the surface without lifting it off or changing the applied pressure. During the scan , the tool must cling the wall, otherwise it will automatically calibrate again. Please wait for the symbol stop flashing and the green light to light up again and then move the tool.

Step 3

• When the tool comes close to a stud, the scale m and the percentage n will increase, the distance indicator l will appear. As the tool gets closer to the stud, the yellow indicator will light. As it detected the center of the stud, the red light is on.

Step 4

• To make the detection results more reliable, when the center is marked, please slide the tool across the wall again to check if the center is near the location of the highest percentage.

Product description

The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon SS A100 electronic stud scanner is sold exclusively on Amazon and detects the edges of wood and metal studs up to 1.5 inches (38 mm) deep
• Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
• Patented "over the stud" indicator and spotlite pointing system ensure the A100 provides trustworthy results
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards

User questions & answers

Question:	Does it detect ceiling joist
Answer:	Hello Donna. Yes, the A100 will locate ceiling joist. Thank you.
Question:	What is the difference between e50 and A100? And which is better? Thanks
Answer:	All i know is that e50 did not work for me. I tired both settings and gave me fake results. Directions are simple. Did not work. I drilled into space.
Question:	Would this work on bathroom/shower tiles? Trying to install grab bars in the shower area
Answer:	Hello Ashley. No, while the A100 can scan through tile sometimes the layers behind the tile, the hardi-backer board and glue, can be problematic. We recommend using the A200 on bathroom tiles. The A200 has an additional metal scan feature on it, if you are not able to get a consistent reading using the Studscan or Deepscan mode you can use the metal scan feature on this tool to find the nails holding the wall boards in the studs. Thank you.
Question:	will this signal if there is a stash in the wall also, just like studs
Answer:	haven't come across one in my walls yet.

Product features

Zircon StudSensor A100

The SS A100 is a handheld tool dedicated to quickly and efficiently find the edges of studs and alert you of live AC wiring. The A100 comes equipped with 2 scanning modes: StudScan and DeepScan.

Locate Studs and Scan for Live AC Wiring Safely and Efficiently

The Zircon StudSensor A100 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

The A100 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

Edge Finding

Before scanning, hold the A100 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds, confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

Be sure not to drill at the edge of the stud. Continue to scan the surface until the stud's center is detected.

The easy-to-read screen will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks.

The center of the stud center is the stud's most secure location. It is critical to drill in the center when mounting heavy objects.

StudScan and DeepScan Modes

Use StudScan Mode to find the edges of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

WireWarning Detection

Safely Scan in both Modes

WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Modes.

It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Frequently Asked Questions

Question: Does the StudSensor A100 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A100.

Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.

Question: Does this tool need to be calibrated?

Answer: Yes, as with all Zircon tools, the StudSensor A100 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A100 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words "StudScan" or "DeepScan" will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this StudSensor A100 locate metal studs?

Answer: Yes, the A100 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A100 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.

Question: Why does the tool beep and the lights flash when scanning for a stud?

Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A100 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. PLEASE TURN OFF THE ELECTRICITY AND USE EXTREME CAUTION IN AREAS WHERE LIVE AC VOLTAGE IS DETECTED BEFORE NAILING OR DRILLING.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.

Question: Does the A100 work on wood paneling and other wood surfaces?

Answer: The A100 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A100 work on textured wall surfaces, acoustic ceilings, or wall paper?

Answer: Yes, the A100 will work on textured surfaces and dried wall paper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this tool to find studs behind carpet?

Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A100 work on ceramic tile?

Answer: While the StudSensor A100 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.

Question: Does this StudSensor work on lath and plaster?

Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.

Question: Can I use this tool to scan the outside wall of my house?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?

Answer: Yes. The A100 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the tool waterproof?

Answer: No. The StudSensor A100 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A100, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the StudSensor A100 come with a warranty?

Answer: The StudSensor A100 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my StudSensor A100?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you. Call the toll free Customer Support Number 1-800-245-9265 Monday - Friday, 8 AM - 5 PM PST to speak with an expert today.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.