11 best metal voltage and stud detector
A metal voltage and stud detector, often referred to as a stud finder or wall scanner, is a handheld electronic tool used in construction and home improvement projects. Its primary purpose is to locate hidden objects within walls, such as electrical wiring, metal pipes, and wall studs. Here's what you need to know about this device:
Stud Detection: One of the primary functions of a metal voltage and stud detector is to locate wall studs. Wall studs are vertical wooden or metal beams that provide structural support for walls. By identifying their locations, you can safely and securely hang heavy objects like shelves, cabinets, or artwork.
Metal Detection: In addition to finding studs, these detectors can locate hidden metal objects within walls. This is particularly useful for identifying metal pipes, conduit, or electrical wiring that may be concealed behind the wall surface.
Voltage Detection: Some advanced models of stud detectors are equipped with voltage detection capabilities.They can alert you to the presence of live electrical wires behind the wall, enhancing safety during renovation or DIY projects. When voltage is detected, these detectors typically emit a warning signal or display a visual indicator.
Types of Detection: There are different types of sensors used in stud detectors, including magnetic, electronic, and radar-based sensors. Magnetic stud finders detect changes in the magnetic field caused by screws or nails used to fasten wallboards to studs. Electronic and radar-based detectors use technology to sense changes in density and composition within the wall.
Operation: To use a metal voltage and stud detector, you typically place the device flat against the wall and slowly move it horizontally. As you move across the wall, the detector will signal when it senses a change in material density, indicating the presence of a stud or metal object. Some detectors provide visual and auditory cues to guide you to the detected object's center.
Calibration: Before use, it's essential to calibrate the stud finder according to the manufacturer's instructions. This ensures accurate detection and reliable results.
Depth Indication: Some advanced models provide information about the depth at which the detected object is located within the wall. This can be particularly useful when planning the installation of hardware or making holes in the wall.
Battery-Powered: Most metal voltage and stud detectors are powered by batteries, typically 9-volt or AA batteries. Ensure the device has a fresh battery to maintain accurate detection.
Applications: These detectors are commonly used by homeowners, contractors, and DIY enthusiasts for various tasks, including hanging pictures, mounting TVs, installing shelving, and making electrical installations. They save time and prevent accidental damage to hidden objects in walls.
Maintenance: Regularly clean the sensors and the surface of the detector to ensure accurate readings. Additionally, store the detector in a protective case or pouch to prevent damage when not in use.
In summary, a metal voltage and stud detector is a valuable tool for anyone involved in home improvement or construction projects. It helps users locate wall studs, metal objects, and live electrical wires within walls, contributing to the safety and efficiency of various tasks.
Below you can find our editor's choice of the best metal voltage and stud detector on the market- SMART FEATURES --- it locate wood and metal studs, ceiling joints, hot AC wiring, Find the stud center, Metal scanning for finding nail, pipe, rebar, and other hidden metallic object. Locates the edges and center of wood or metal studs. Comes with easy-to-read LED display and audio tone. When target object is found the device emits beeping sound to notify the user
- SUPERB SPECIFICATIONS --- Detection depth: Stud mode:Wood stud of 30×30mm ≤18mm | Metal mode:Iron pipe of Ø 25mm ≤30mm | AC mode: Typical depth of 50mm for 90~250V at 50~60Hz Fuse Protection for "20A" Terminal Inputs: 20A, 1000V,FAST, Min.Interrupt Rating 20000A
- EASY TO USE --- two buttons operation, first select the probe type, then press and hold the side button and scan horizontally across the object surface. Auto power off when idle 60 seconds. LED lights on when an object's edge is detected. spotlight appears and mark the groove position when an object is detected. An "OL" shown on the screen when Overrange is reach. Offers more functions, stud finder, metal detector and AC tracer. Plus its battery operated, perfect for mobility
- BEST MATERIAL DETECTION --- The Multi-Scan Stud Finder can be used for many purposes, including simpler and more advanced projects, like finding studs, various metals, and hot AC wiring through your ceilings and walls.
User questions & answers
Question: | Where can i get full wire diagrams, electrical requirements (wire size/ breaker size), piping diagrams and warranty information |
Answer: | Yes it is. |
Product features
80 Gal. 10 Year 16,500-Watt Electric Water Heater with Durable 316 l Stainless Steel Tank
Doing a DIY project has never been this easy!
Whether you're a professional contractor or a DIY homemaker, you need to know what's on the other side of the wall before drilling holes.
Instead of making any irreversible damages, take home this Multi-Scan Stud Finder. When it comes to house projects, you can always save more by doing it right the first time.
With this device, edges and center of wood or metal studs are easy to locate. It can also locate metallic pipes in concrete, electrical box, exhaust vent, conduit, rebar, and ducting. It will also detect live wiring in the walls.
No wonder, it's one of the best choices for scanners used in construction, fitment, carpentry, home decoration, and renovation.
The three scanning modes (wood, metal and AC scan) make up the best tool for both craftsmen and home carpenters in avoiding unnecessary setbacks.
This 3-in-1 advanced unit detector is used to detect and locate in three way stud, metal, and AC voltage. It has audible and visual alerts. Design with groove for marking. Four Red LED for signal indication (when the unit detects an edge of object, the top signal LED light as an indicator).
STUD DETECTION MODE
Wood Stud Detection Mode scans through layers of drywall up to 30 mm x 30 mm ≤18mm.
Hang up frames or shelving safely and securely without causing any disaster.
METAL DETECTION MODE
Metal Detection Mode scans through Iron pipe of Φ 25 : ≤30mm.
Find metallic pipes in concrete. Find electrical box, exhaust vent, conduit, rebar, and ducting.
AC WIRE DETECTION MODE
Ac Wire Detection Mode scans through a typical depth of 50mm for 90~250V at 50~60Hz.
Trace hot wires behind ceiling, floor, and wall. Install grab bar, ceiling fan, and chandelier securely.
Construction
Home Decoration
.
Carpentry
DIY Projects
Product description
Specifications:
Color: Blue,Red,Yellow,Green(optional)
Material: ABS
Battery Power: AAA 1.5V*3(not include)
Stud Detecting Depth: wood 30*30mm:≤18mm
Metal Detecting Depth: Iron Pipe 25mm:≤30mm
AC Live Wires:AC 90-520V live wire(5cm),frequency at 50-60Hz
Operating Temperature and humidity: -7℃-40℃,<75%
Storage Temperature and humidity: -20℃-50℃,<85%
Size: 155(L)*72(W)*28(H)mm
Weight: 200g
Packing List:
1×Stud Finder Sensor
1×User Manual
- Stud Sensor Scanner Depth: Detects stud up to 0.71 inches (18mm) , metal up to 1.2 inches (30mm), presence of live wire up to 3 inches (50mm) .
- 3 in 1 : Multi-scanner stud finder for Wood, Metal, AC Current. Quickly locates edges and center of wood ,wall studs, metal pipes,wooden joist ,rebar behind walls, floors and ceilings, also indicates the presence of live AC wire .
- Easy to Read : LCD with digital display and continuous sound warning indicating you the location of the edges of the studs.
- Easy to Use : After battery installation,the unit is turned on with a long beep,when auto power off,press TEST button for two seconds to turn on again.Auto power off without any operation .
- Compact design is easy to hold and use. Low battery indication. Battery:AAA 1.5V*3(not included).
- FOUR SCANNING MODES: This Preciva stud finder has FOUR scanning modes, the stud scan, the deep mode, metal scan, and the AC wire scan.You can switch the modes as you like.
- LCD BACKLIGHT DISPLAY: This multifunctional wall scanner detector has a graphic LCD display which can indicate the scanning modes, signal strength, automatic calibration and remaining battery indicator. The stud finder also features a backlight for use in the dark.
- AUTOMATIC CALIBRATION: This wall detector could calibrate itself automatically. you can calibrate it by placing the device on the wall where there are no studs, metal or AC wire. The stud finder features a calibration indicator to avoid making mistakes and increase the detection accuracy.
- SOUND INDICATION: This stud finder wall detector provides a beep signal alert, which could remind you of the position of the stud. If there is a stud,metal or AC wire, you can know the position quickly and clearly.
- WHAT YOU WILL GET: You can get a STUD FINDER, a 9 V battery and a user manual.if there are any problems with our products - just contact us directly.
User questions & answers
Question: | Can this find studs behind a tile wall |
Answer: | Yes if the wall plug supports the machine plug,otherwise you will have to use the conversion line which comes with the cut50. |
Question: | does this have a level |
Answer: | It is a HF-ARC start plasma cutter,I would not use with that. |
Question: | Does this have a level |
Answer: | I don’t have the answer |
Question: | where is this made |
Answer: | Hi,this cut50 is a touch arc plasma cutter |
Product features
Preciva Wall Stud Finder Wall Scanner
- Specifications:
- Product name: Preciva wall scanner stud finder
- Color: Purple
- Material: ABS
- Package list:
- 1x Wall Stud scanner
- 1x 9V battery
- 1x User Manual
FOUR SCANNING MODES
- Maximum Detection Depth:
- Stud Mode: 3/4 in (19mm)
- Deep Mode: 11/ in (38mm)
- Metal Mode: 21/ in (60mm)
- AC Wire Mode: 2 in (51mm)
STEP 1
- Press the Button at the left side of the device to power it.
STEP 2
- Slide the button on the Middle of the divice to selecting the scanning modes.
STEP 3
- Place the divice flat on the scanning surface, then press and move it in a stable way.
- When the object is found, the divice wil beep continually and there will be a display on the LCD screen, Mark it with a pen or pencil.
Product description
General Tools & Instruments KT100 Restoration Kit with IRT, Moisture Meter and Stud-Metal-Voltage Detector is ideal for restoration and renovation specialist. Includes 3-in-1 Stud/Voltage/Metal detection, IRT, Pinless Moisture meter. Kit includes Soft Carrying Case, 3 9V Batteries, 3 User's Manuals and 1-Year limited warranty.
GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.
For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.
WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
- Ideal for restoration and renovation specialist
- 3-In-1 Stud/Voltage/Metal Detector
- IRTC50 - Scanning IR Thermometer
- Pinless Moisture Meter
- Includes Soft Carrying Case, 3 9V Batteries, 3 User's Manuals and 1-Year limited warranty
User questions & answers
Question: | Does this devices find pvc water pipes |
Answer: | No |
Question: | Is the moisture meter in this kit a no-pin device |
Answer: | This model has a power cord. It is not cordless. They do make models that are cordless. Ryobi makes good tools. |
Product description
The General Tools MSV100 Stud, Metal and Voltage Detector can quickly and easily locate the edges and center of metal studs and joists behind walls, floors and ceilings. can locate wood studs/joists and metal cables/pipes behind walls or even inside furniture. It can also make the work of contractors, carpenters, plumbers, electricians and demolition crews safer by detecting energized AC outlets and "live" wires behind walls or ceilings. This detector automatically compensates for wall thickness. In voltage mode, it also automatically compensates for distance to wire. Center arrow and beeper pinpoint edges. A marking slot on top of unit makes marking precise and easy. A user manual and 9 Volt battery are included with every tool. SPECIFICATIONS Maximum wall thickness for wood detection: 3/4 in. (19mm)Maximum detection range for iron or copper pipe: 1. 5 in. (38mm)Maximum detection range for AC voltage: 2 in. (50mm)Operating temperature: 40° to 104°F (5° to 40°C)Weight: 7. 3 oz. (207g)Power source: "9V" battery (included)GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1, 000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
- DETECT- find wood joists/studs, live wires and pipes/cables behind walls or ceilings as well as wood furniture frames
- THREE MODES- optimizes sensitivity for detecting wood, AC voltage or metal
- EASY TO USE- automatically compensates for wall thickness in all three detection modes plus, in AC voltage mode, automatically compensates for distance to live wire
- AUDIBLE & VISUAL- center arrow and beeper indicate edge of detected material
- MARKING SLOT- the slot at the stud finder for marking the center of the stud easily
- EASY TO READ- big, bright backlit LCD display
- INCLUDED- user manual and 9 Volt battery are included with every tool
Product description
Feature:
1. Made of high quality material, this product is sturdy and durable.
2. When detect metal or wood position, the detector has sound and flash alarm.
3. Able to detect Studs in the same object.
4. Handheld design, suitable for indoor decoration use.
5. It can be a great choice for all users.
Specification:
Condition: 100% Brand New
Item Type: Handheld Detector
Material: ABS
The maximum depth of detection (under the surface of a homogeneous object):
Wood 30 x 30 mm: ≤18mm
Metal: iron pipe=25mm, or less than 30mm
Concurrent Electric Line: 90-250V≤50mm
Power Supply: 9V Battery
Size: Approx. 155 * 72 * 28mm / 6.1 * 2.8 * 1.1inch
Weight: Approx. 147g
Package List:
1 * Handheld Detector
1 * User Manual
- Able to detect Studs in the same object.
- It can be a great choice for all users.
- Made of high quality material, this product is sturdy and durable.
- When detect metal or wood position, the detector has sound and flash alarm.
- Handheld design, suitable for indoor decoration use.
- The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
- 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
- Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
- Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
- Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.
User questions & answers
Question: | Is there an instruction manual online? I misplaced the manual that came in the box |
Answer: | Si puede solicitar un manual de instrucciones en [email protected] |
Question: | Will this locate studs behind bathroom tiles |
Answer: | If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom. |
Question: | Is the battery included |
Answer: | No the 9volt battery is not included. |
Question: | Can this detect a stud behind plaster walls |
Answer: | This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc |
Product features
Stud Scan Detection
Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Metal Scan Detection
Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.
Live AC Wire Detection
AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.
The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing
- GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
- 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.(12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
- WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
- EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
- WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.
Product features
Stud Scan Detection
This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Metal Scan Detection
Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.
Wire Warning Detection
Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.
The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing
- 【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
- 【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
- 【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
- 【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
- 【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
- 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.
Product features
Scanning for wood studs
- Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
- Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.
Scanning for metal objects
- Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
- When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.
Scanning for wires
- Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
- The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.
How to find the stud
- Hold the tool straight up and down, position it onto the surface to be scanned, and do not rotate the tool.
- Press the mode button briefly to enter the wood stud detection mode, the symbol will flash on the screen. Do not move until the symbol stop flashing and the green light is on, automatic calibration of the tool is completed.
Step 2
- Move the tool uniformly and slowly over the surface without lifting it off or changing the applied pressure. During the scan , the tool must cling the wall, otherwise it will automatically calibrate again. Please wait for the symbol stop flashing and the green light to light up again and then move the tool.
Step 3
- When the tool comes close to a stud, the scale m and the percentage n will increase, the distance indicator l will appear. As the tool gets closer to the stud, the yellow indicator will light. As it detected the center of the stud, the red light is on.
Step 4
- To make the detection results more reliable, when the center is marked, please slide the tool across the wall again to check if the center is near the location of the highest percentage.
Product description
The Zircon MetalliScanner m40 electronic metal scanner quickly and easily detects metal in lath and plaster, wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces. This metal detector locates ferrous (magnetic) metal up to 4 inches (100 mm) deep and non-ferrous (non-magnetic) metal up to 2 inches (50 mm) deep. The Zircon m40 has two scanning positions, Wide Scan and Pinpoint Scan. To get started, install the included 9V alkaline battery. Hold the tool in the air away from any metal but make sure the blue sensor is parallel to the surface being scanned. Press and hold the Power Button to calibrate the unit. Once you hear a beep and see the green "Ready" LED illuminated, calibration is complete. Continue to hold the Power Button as you slowly slide the tool across the surface. As the MetalliScanner approaches a metal object, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted blue coil and an audio tone indicate when a metal target is located. This MetalliScanner m40 tool easily solves the very difficult problem of finding studs in lath and plaster walls. It works as a nail finder by detecting the pattern of nails that attach the wood lath to the studs. Additionally, the MetalliScanner m40 metal locator finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings and is great for scanning reclaimed lumber for hidden metal. Now in easy open packaging, this product comes with everything you need to get started, including the battery! Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the m40 has the technology and durability you're looking for to get the job done right.
- Zircon's MetalliScanner m40 metal detector locates ferrous (magnetic) metal and non-ferrous (non-magnetic) metal
- Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces
- Works as a great stud finder for plaster walls, as well as finding rebar in concrete
- Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings
- Now in easy open packaging, 9 volt battery included
- Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep
- Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces
User questions & answers
Question: | Is this either a class 1 tape, or have accuracy comparable to class |
Answer: | The diameter of the label on the side of this tape measure is 2.1 inches. |
Product features
Zircon MetalliScanner m40
The MetalliScanner m40 quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete, and other non-metallic surfaces. It locates ferrous (magnetic) metal up to 4 inches (10 cm) deep and non-ferrous (non-magnetic) metal up to 2 inches (5 cm) deep. The MetalliScanner m40 finds plumbing, ductwork, rebar, nails, and screws in walls, floors, and ceilings, and is great for scanning reclaimed lumber for hidden metal.
m40 Functions:
- Detects ferrous and non-ferrous metals in most non-metallic surfaces.
- Finds the pattern of nails to detect studs.
- LED arrays indicate signal strength.
- Blue coil and audio tone indicate when metal target is located.
- PinPoint Scan locates small objects, including screws and nails.
- Wide Scan detects metal in walls or concrete.
PinPoint Scan
Use the m40's PinPoint Scan position to locate small metal targets such as nails and refine your search results.
How to Use:
As the m40 approaches a metal object, the red LEDs progressively light from the bottom up. The top lighted blue coil and an audio tone indicate the strongest signal when a metal target is located.
Calibrate away from any metal for maximum sensitivity. Recalibrating closer to the target decreases sensitivity to find the precise location of metal.
Wide Scan
Use the m40's Wide Scan to quickly find approximate locations of metal in walls and/or concrete.
Use the m40 in Wide Scan position just as you would in PinPoint Scan position.
Scanning through Lath and Plaster
The m40 solves the difficult problem of finding studs in lath and plaster walls that do not contain metal mesh by finding the pattern of nails that attach the wood lath to the studs.
The m40 scans through lath and plaster in both PinPoint Scan and Wide Scan positions.
Key to Success is the Battery
A fully charged 9V battery is required to steadily power the integrated LCD screen in Zircon tools. Please note that, like a cell phone or any personal electronic device, the 9V batteries needed to power Zircon tools can lose power even when sitting idle. The installation of a fresh battery, with an extended expiration date, typically resolves 99% of problems seen by Zircon Customer Support.
Frequently Asked Questions
Question: What type of battery does the m40 use?
Answer: The m40 requires a 9V alkaline battery.
Question: What types of metal will the m40 detect and how deep is it able to scan?
Answer: The m40 detects both Ferrous and Non-Ferrous Metals up to 4 and 2 inches respectively.
Question: Is the m40 able to find studs?
Answer: Yes, the m40 is a dedicated metal scanner. It can find nail or screw heads that hold wall board to studs (thus identifying stud locations).
Question: Can I use this tool on lath and plaster?
Answer: Yes! The m40 solves the difficult problem of finding studs in lath and plaster walls that do not contain metal mesh.
Why Zircon?
For over 30 years, the dedicated engineers and staff at Zircon have developed and implemented patented, cutting-edge, technology for our professional and DIY lines of wall scanners and stud-finding tools. As the worldwide industry leader in the category, we take the quality of our products and our customer service seriously. Every unit coming off our production lines is calibrated and quality-tested before going to market. Because we know there's a learning curve to our technology, we back our products with a world-class customer service and tech support team.
You can call our customer support number and speak to a live expert who will be happy to answer any questions or help you work through any issues you may be experiencing with our tools. Armed with our quality products and backed by our support teams, you'll know the professional confidence that comes from owning a Zircon.
- ➤The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes, fire lines, studs, wooden frames, steel bars and supporting beams hidden behind walls, floors and ceilings. Whether you are a professional, homeowner or DIY enthusiast, you can find a good use in this electronic screw scanner
- ➤The wall scanner includes five different scanning modes, suitable for metal tubes, fire lines, studs, wooden frames, steel bars and brackets, as well as ceilings, deep embedded objects behind walls. The bolt mode can detect wooden beams and joists in the dry wall, up to 1.5 inches. Metal mode can detect up to 3 inches of pipe. Depth mode detects up to 3 inches of wood and metal components, while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
- ➤Auto-calibration and ergonomic grip, comfortable to use, before testing, please hold down the scan button for 1-2 seconds. Auto-calibration provides maximum reliability and accuracy for users. The ergonomic design of this wall stud detector enables it to be fixed from any angle
- ➤LCD screen upgrade design, display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning, can detect the exact position of the object. When the material is found, the LCD display will beep to tell you if you are close to the target. Fast detection saves time and energy for users and makes task completion easier
- ➤Professional Design with Top Quality - FOLAI has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc
User questions & answers
Question: | Will this work to locate stud, electrical, etc on exterior succo walls |
Answer: | Yes. |
Question: | You need to select stud size... but what if you don't know what size studs are in the wall |
Answer: | The point of the arrow points where the stud is, regardless of the size of the stud. |
Question: | will this work through plaster |
Answer: | I used it in the bathroom and it worked well, I guess it would depend on how thick the plaster is ... if it works through drywall, you’d think it would work thru plaster |
Question: | Does this work on a ceiling |
Answer: | Should show studs through dry wall anywhere. |
Product features
Stud Scan
We suggest you to use Stud Mode first to find the edges of wood and metal studs up to 3/4 inches (19mm) deep. If Stud Scan mode shows irregular readings or the Signal Strength indicator is weak, the studs might be behind more than ¾ inches (19 mm) of drywall.then switch to Deep Scan mode. This doubles the scanning depth to 1½ inches (38 mm) deep and allows for increased accuracy on deeper targets.
Metal Scan
Use this mode to locate and avoid hazards such as pipes behind walls. Metal Scan mode detects non-ferrous metal such as copper pipe up to 1½ inches (38 mm) deep, and ferrous metal such as rebar, up to 2.36 inches (60 mm) deep. You can differentiate between metal and wood studs through this mode.
First, find the stud in Stud Scan mode. Then, switch to Metal Scan mode, the tool alerts in a pattern as it detects the mental drywall screws in the wood for wooden studs.
AC Wire Scan
In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.
For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.
1.Calibration
Place the unit flat on the wall, press and hold the scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed.
2.Moving
Slowly slide tool across the wall. A bottom pointed arrow and EDGE indication will illuminate, indicating location of the stud edge.
3.Find Stud Center
Continue sliding the tool. When the center of a stud is located, the full bars on the Signal Strength Indicator, the pointed arrow on the top of the bars, the CENTER indication will all show and the buzzer will sound.
Latest Reviews
View all
Tenoning Jigs
- Updated: 10.04.2023
- Read reviews

Microscope For Kids 6
- Updated: 23.01.2023
- Read reviews

Gemstone Floor Globes
- Updated: 12.03.2023
- Read reviews

Skill Cordless Screwdrivers
- Updated: 09.07.2023
- Read reviews

Battery Under Cabinet Lightings
- Updated: 24.03.2023
- Read reviews