11 best moisture meter home depots

Product description

Pin/Pinless Moisture Meter, PercentWME (Wood Moisture Equivalent) Pin Moisture Reading, Relative Pinless Moisture Reading, Moisture Content 6 to 94.8 Percent Wood (Pin), 0 to 99.9 Relative (Pinless), Display LCD and Tri-color LED Bargraph, Data Hold Yes, Battery Type 9V, Includes Battery, Replacement Pins, Protective Cap, Pouch Carrying Case and Instructions, Manufacturers Warranty Length 1 Year

• Nonelectrical Properties Testing
• Test Instruments
• Country of Manufactury: China
• Commercial Brand: Extech

Product features

Measures a Variety of Material Types

The MO260 detects moisture in wood and other materials such as particle board, carpeting, and ceiling/bathroom tiles using the non-invasive method (pinless); it also measures sheet rock and other building materials using the pin method.

Easy to Read Display

This moisture tester features a digital LCD screen with numerical display of measurement reading and battery status, audible alert, measurement mode and HOLD icons; LED bargraph shows Wet/Dry measurements in three colors for quick identification of moisture.

Replaceable Pins with Protective Cap

Electrode pins are replaceable and come with a spare set; pins can be stored in the protective cap (which snaps onto the side of the meter when not in use) and the spare pin compartment on the rear of the moisture detector.

Improved Accuracy

Low battery indication, built-in calibration check and calibration zero ensure that moisture measurements are accurate during testing.

Product description

FLIR MR160 IGM Moisture Meter, Infrared Guided Measurement, Built-in Thermal Imager, Integrated Pinless Sensor, External Pin Probe, Rugged Design, Internal Rechargeable Battery

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings

integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box

Key Features

• Built-in Thermal Imager
• Integrated Pinless Sensor and External Pin Probe
• Infrared Guided Measurement
• Stored Image Capacity up to 9999 images
• Automatic Image Calibrator
• Color moisture alert
• Portable, Tough and Durable
• Easily investigate insulation and moisture issues

Specifications

• Image Display: Color moisture alert
• Minimum Focus Distance: 10cm (4")
• Spectral Response: 8–14 Micro m
• Thermal Image Resolution: 4800 pixels (80 × 60)
• Thermal Imaging Detector: FLIR Lepton microbolometer
• Field of View (W x H): 51° × 38°
• Image Calibration: Automatic
• Image Frame Rate: 9 Hz
• Measurement Resolution: 0.1
• Pin Moisture Groups: 9 material groups
• Pin Moisture via Ext Probe Range (Accuracy): 0–100% WME (± 5%)
• Pinless Measurement Depth: 0.75" (19mm) Max
• Pinless Moisture Range: 0–100 relative measurement
• Response Time Pinless: 100ms
• Response Time Pin Mode: 750ms
• Thermal Sensitivity: less than 0.15°C
• Battery: 3.7 V, 3000 mAh Li-ion rechargeable via micro USB
• Battery power\Cont Run Time: 18 hours MAX
• Packaging Size: 4.7" x 5.5" x 13"

• Built-in Thermal Imager
• Integrated Pinless Sensor and External Pin Probe
• Infrared Guided Measurement
• Stored Image Capacity up to 9999 images
• Automatic Image Calibrator
• Color moisture alert
• Portable, Tough and Durable
• Easily investigate insulation and moisture issues

User questions & answers

Question:	Would a thermal camera and moisture meter accomplish the same tasks as this unit
Answer:	Hello John Jo,A thermal camera and moisture meter would perform the same tasks. The convenience and innovation on the MR160 is that the unit will do the job of both separate units. The IR function in the MR160 is for visual guidance, where a thermal camera may provide more detailed temperature information. Best Regards...
Question:	Is this essentially the same camera as the tg165 but with extra features that make it good for moisture
Answer:	Not at all, the thermal imager is so so. But the true benefit is the ability to read the moisture content of material and to have all your customized readings on the screen at all times, including relative humidity, ambient air, etc. I have the 176 which does probe testing and also has a pad on the back of the unit, this pad lets you pull a reading without destructive measures (awesome for general walk arounds)! Can't remember what the other models offered, but I am happy with the 176. Great for mold and home inspections. I do also have an additional flir thermal imager. I definitely recommend one with MSX technology. The difference is unreal! Good Luck.
Question:	If i need to find a steam leak in a 7000 sq ft apartment building, should i get this or the tg
Answer:	I would get the MR176 because the Thermal Imager may pick up the steam and the change in temperature, not just look for moisture.
Question:	Why use this instead of just a normal thermal camera
Answer:	Hi, Matt M. Totally agree with you - if you need only just to spot the problem area (leakage in a wall or elsewhere) intending to fix it and get rid of it - the very Flir's C2 or TG165 would be pretty handy and cover all the needs of this piece/type of job. The MR160 is a multi-tool for those who need to "Locate the Enemy and MEASURE the Hostility" for some specific needs or considerations. )

Product features

FLIR Systems MR160 Imaging Moisture Meter

Identify moisture issues without disturbing walls, floors, ceilings and joints with FLIR's MR160 Imaging Moisture Meter – the only moisture meter that uses thermal imaging to show you exactly where to measure. Infrared Guided Measurement (IGM) technology provides live thermal images to help you locate cold spots, then takes targeted moisture measurements of the cold spots to determine if they’re caused by a moisture problem.

The FLIR MR160 Imaging Moisture Meter features:

80 x 60 Lepton thermal imager with Infrared Guided Measurement (IGM) technology to locate cold spots.

An integrated, internal pinless sensor and external pin probe for contact and non-contact moisture measurements.

Advanced Infrared Guided Measurement (IGM) Technology

The FLIR MR160 Imaging Moisture Meter features an 80 x 60 Lepton thermal imager with built-in IGM technology, which pinpoints cold spots associated with moisture evaporation. The live infrared image identifies the exact location of the moisture problem, so you know where to take the most accurate measurements.

Non-Invasive Moisture Measuring

Determine if cold spots are moisture-related before disturbing walls, floors, ceilings and joints. Once cold spots are located, the meter's integrated pinless sensor and external pin probe allow you to make contact and non-contact moisture measurements for a closer look at potential problems.

Focus-Free Thermal Camera

The MR160 has a built-in, focus-free thermal camera with a wide-angle lens that captures and stores up to 9,999 BMP images with overlaid measurement values. The automatic image calibration allows you to get as close as four inches to your target and still maintain focus. The MR160 can be used as a combined infrared camera and moisture meter or you can use each option separately.

Durable, Compact Design

The MR160 is rugged enough to handle the demands of a full workday but is compact enough to fit on a tool belt or in a toolbox. An industry-leading warranty demonstrates FLIR's absolute confidence in all of its products.

Powerful Rechargeable Battery

The internal rechargeable battery has up to 18 hours of continuous run time. With typical usage, a fully-charged battery can operate through a month of work without requiring a recharge.

Free FLIR Tools Software

The free FLIR Tools reporting software allow you to review images, analyze data and generate detailed reports, making it an ideal diagnostic and reporting tool for contractors, insurance adjusters, building managers and DIY-ers alike.

Improved Transparency

Build trust with your clients or tenants through the use of images that illustrate the exact location and extent of moisture damage. When repairs are costly or extensive, real images help provide explanation and transparency to the project.

Out-of-the-Box Ready

Everything you need to start viewing and measuring moisture levels is included in the package, so you can get started right away. Includes the FLIR MR160 Imaging Moisture Meter and the MR02 external Pin Probe.

Product description

The right moisture meter makes all the difference when surveying, cleaning or restoring a property after water damage! The Protimeter Aquant (non-invasive) is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with a RF measurement system unique to the Protimeter. This system allows you to detect moisture up to ¾” (20mm) below and behind the surface in the most efficient way possible. All Protimeter instruments have a two-year warranty.

• The Aquant is a non-invasive rapid test moisture meter for a wide range of building and construction material
• Detects moisture directly in materials and below wall and floor coverings such as tile, wood and viny
• Not adversely affected by surface moisture such as condensation
• Dual display LCD and LED for easy reading
• Color changing LEDs to show moisture condition green (dry), yellow (at risk) and red (wet)

User questions & answers

Question:	does it work on fiberglass
Answer:	Yes, we had customers used this meter to do that
Question:	Could i use this for gypsum moisture for the floors
Answer:	500plus installed two tubes while 500 installs one tube.
Question:	Does this have a WME% scale
Answer:	This product detects beta, and gamma, not alpha. GMC-600+detects alpha
Question:	Does it come with the probes and the bag
Answer:	500 has one sensor while 500plus has two sensors

Product description

The MR55 is an affordable tool for moisture remediation and pest control professionals, home or building inspectors, and flooring installers. The pin-based meter features wireless connectivity, making it easy to view and share readings from a Mobile device. You can also tune the meter to the appropriate test material using a built-in Library of 11 material groups to get the most accurate readings. Quickly look up the correct material Group on the FLIR website by using your Mobile device to scan a QR code on the back of the meter. Then send measurement data wirelessly to FLIR tools Mobile for live display and to compatible FLIR thermal cameras for later analysis and reporting. The MR55 is a reliable standalone meter and a useful accessory to pair with a FLIR thermal imager.

• Pin moisture measurement automatically, compensates for ambient temperature
• Tune meter to the appropriate test material via built in library of 11 material groups, including: timbers, drywall, concrete, plaster, brick, and more
• Wirelessly connect to FLIR tools mobile to view readings Remotely
• Upgrade firmware as needed via micro USB port located in battery compartment
• Measure ambient temperature and relative humidity

User questions & answers

Question:	This is 105 salsa
Answer:	There’s no support anywhere

Product features

FLIR MR55

The FLIR MR55 is a pin-based meter with wireless connectivity, which offers the convenience to view readings from a mobile device via the FLIR Tools Mobile app. Thanks to a built-in library of 11 material groups, users can tune the meter to the appropriate test material to improve measurement accuracy. This library is easy to access on the FLIR.com website by scanning a QR code on the back of the meter with a mobile device.

Take Accurate Measurements

Test from 11 material groups with pin probes. Measurements automatically compensate for ambient temperature.

Inspect Anywhere With Ease

Features replaceable electrode pins, standard AA batteries, a backlit LCD display, and a bright worklight to help make your job seamless.

Wireless Connectivity

Use Bluetooth to view readings from a mobile device.

Product description

The Digital Mini allows building professionals—such as flood damage restoration contractors, surveyors, homebuilders and architects—to assess building moisture levels during new build and refurbishing activities. It helps you easily identify the extent of the moisture penetration, diagnose the cause of the problem and monitor changes in moisture level. Plus, the ability to add optional attachments and a patent pending reference mode enables you to compare your reading with a baseline measurement. All Protimeter instruments have a two-year warranty.

• This reliable moisture meter has a pin type measurement function and shows results on the large digital display as well as the easy to interpret color LED display
• Rugged construction with large backlit display
• Pin moisture measurement
• Wide range of accessory plugins
• Industry leading 2-year warranty

User questions & answers

Question:	Does this meter have a scan mode so we can measure saturation of building materials without using the pins
Answer:	This meter is only has penetrating pins , not a surface probe

Product description

The Orion 910 Deep Depth Pinless Wood Moisture Meter Kit continues the Wagner tradition of superior accuracy and adds incredible new functionality. The new Orion 910 meter incorporates IntelliSense technology, a more rugged design, and industry exclusive true in-the-field calibration capability provided by the included On-Demand Calibrator.

• Orion 910 deep depth pinless moisture meters featuring accuracy, versatility, and quality
• Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty
• Virtually unaffected by temperature of the wood or the environment
• Every Orion meter comes with an on-demand calibrator to easily calibrate your meter
• Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials

User questions & answers

Question:	measure moisture at two depths, what are those depths
Answer:	I purchased two of these. They were an extremely tight fit on my FNH .40 and wouldn't fit my PMR30. A couple of minutes with a triangle needle file and they now fit all my firearms, hand gun and long gun. It should fit but if it gives you a little trouble fitting, a couple minutes work make these an excellent value. They work as well as or better than all my other green lasers, and for brightly lit situations they are far better than any red one. Yes, they even fit all my .45's, which are all 1911's.
Question:	Can you recommend a meter that can accurately read from 5/8" to 6" treated pine material. We are in the process of staining large amounts of lumber
Answer:	If it has a rail system with atleast three rails then it should
Question:	What is the best meter for log home restoration
Answer:	Already answered correctly. Push one side turns it on; push other side turns it off. It remains on until turned off.
Question:	Does this product have a warranty? I just noticed i couldn't find anywhere where it mentions it
Answer:	If the battery is installed correctly and the batteries are not dead the laser should light up when turned on.

Product features

True In-The-Field Calibration

There is no need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased.

*patent pending

Fast Selection Species Settings

With simple up/down arrow buttons, your Orion meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 910 can also be user-configured to measure some non-solid wood products such as plywood, OSB, or MDF. The Orion line even has settings information for many bamboo flooring products.

Virtually Unaffected by Temperature

Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood.

Non-Damaging Pinless Sensor

Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters.

Product description

The MM8 Pinless LCD Moisture Meter with Tricolor Bar Graph is ideal for measuring the moisture content of wood and construction materials.

DETAILS

• Digital moisture meter features a hi-visibility white on black screen providing easier readability from any angle

• Improved ergonomic handle design conforms to your hand for a more comfortable user experience

• Moisture tester has separate settings for drywall, masonry, softwood and hardwood

• Non-invasive capacitive sensing technology

• Stops mold before it starts with early detection of moisture; essential water damage tool

• Auto calibrating

• 3 -color LED bar graph

• Reading HOLD button

• Auto power off

• Separate out-of-range alarms for wood and building materials

SPECIFICATIONS

• Measurement ranges: 0 - 53% for softwood, 0 to 35% for hardwood, relative readings for wallboard and masonry

• Measurement accuracy/resolution: ± 4% for hardwood and softwood

• Measurement resolution: 1 %

• Maximum sensing depth in wood: 3/4 in (19mm)

• Sensor size: 1.5 x 1.5 in (38 x 38mm)

• LCD size: 2 in (51 mm) diagonal, with three 0.5 in. (13mm) high digits

• Out-of-range alarm levels: >17% for wood, > 70% for drywall and masonry

• Bar graph composition: Three each green, yellow and red LEDs

• Auto power off: After 2 minutes of inactivity

• Operating temperature: 32° to 104°F (0° to 40°C) @ 5 to 95% RH

• Weight (without battery): 5.4 oz (152g)

• Power source: "9V" battery (included)

DIMENSIONS

6.3 x 2.8 x 2.9 in. (160 x 70 x 73.5mm)

INCLUDES

• Battery

• 1-year limited warranty

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• MEASURES- Separate settings for drywall, masonry, softwood and hardwood
• NO DRYWALL DAMAGE- Non-marring sensing technology protects drywall
• EASY TO READ- LEDs clearly indicate moisture level
• HI VISIBILITY SCREEN- Large 2 inch (50mm) backlit white on black screen providing easier readability from any angle
• FIND MOLD- Stops mold before it starts with early detection of moisture; essential water damage tool
• ERGONOMIC- Improved ergonomic handle design conforms to your hand for a more comfortable user experience

User questions & answers

Question:	Just got a used one on amazon here. there are no instructions. also it has no battery
Answer:	I bought the dr.meter specifically to check installed drywall in non-pin mode. I didn't even see a way to "calibrate" the meter. I tested it on a known dry section of wall: the meter read 0%. Then I slid it over the suspected area and got readings varying from 15% up to 60% or so. That confirmed my suspicions. I cut out a big rectangle of the 3/4" drywall ceiling and it was quite wet inside, dripping. The open cell foam insulation was wet and spongy. The meter reading is instant and there is no apparent lag when moving. It even differentiates between different pieces of fruit. I tested some oranges, with readings of 40% to 55%, or so. It's a great device!
Question:	Does this item come with a case
Answer:	No, the pins are not replaceable.
Question:	Does it sense moisture through a painted surface or just the moisture content of the paint
Answer:	Please kindly be advised that you can choose the probe needling mode or the scanning mode. There are no pinhole marks will be left in the scanning mode. Thank you!
Question:	This meter is called pinless, but, according to the questions below it has pins. So is it pinless or does it have pins
Answer:	Most interior walls read 0%. Best way to judge your walls or ceiling is to take readings in other areas of the room. But yes 20% is high. Also make sure there is no metal in the wall like in the corners some house do have metal this will give you a false reading.

Product description

General's Non-Penetrating LCD Moisture Meter with Tricolor Bar Graph is ideal for DIY enthusiasts, woodworkers, contractors, building inspectors and water damage remediates. Includes 1 9V battery and user's manual. 1 Year Warranty.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DETECT MOISTURE- Determine the moisture content of softwood, hardwood and other building materials (like drywall and masonry) or check water damaged areas to see if moisture is still present
• PROTECT WORK SURFACES - there are no pins on this tool, so your walls and projects can be saved from pinholes, scuffing and scratching to figure out their moisture levels
• VISUAL AND AUDIBLE ALERTS - if you’re looking for the source of a leak behind your work surfaces, listen for the high pitch tones to give you an accurate read on where moisture is most concentrated or quickly see using the tricolor LED moisture indicator
• DEEP READS - even without pins, this tool can read the moisture levels up to a 3/4 inch deep into the surface with an overall Measurement range of 0 to 53% for softwood, 0 to 35% for hardwood and relative readings for wallboard and masonry.Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
• EASY TO READ AND USE- Auto-calibrating, 2-inch diagonal backlit LCD screen and a 3-color LED bar graph, HOLD button, auto power-off function, out of range alarm and low battery, 9V battery included
• FIRST STEP IN MOLD PREVENTION - by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried

User questions & answers

Question:	Can this be used to locate a leak behind drywall. The drywall is not showing wetness so the water is probably running down a stud or outside wall
Answer:	The laser level is amazing I’m very happy with it. It helped me a lot with my work especially with tiles and hanging up pictures
Question:	Can this be used on concrete and drywall
Answer:	Yes, our laser level is suitable for laying tiles on the floor or wall. If you turn on all lasers, it can indeed give you several 90-degree angles at the same time.
Question:	I had a leak inside a wall that came from an outside source. I would like to check for moisture on drywall and wood behind wall. Is that possible
Answer:	There is a portable plastic toolbox that can hold all accessories and laser level, which is a great design. There is protective foam installed inside the tool box, so you don't have to worry about accidentally dropping it and damaging the laser inside. The case fully protects the laser!
Question:	What's the probe length? Are they insulated or replaceable
Answer:	Actually I don’t think there are any differences in function of the laser but they are different. I think the Huepar brand was introduced into the market earlier and accumulated more reviews, which resulted in customers willing to pay a higher price for the laser. I like my laser level very much and it works great.

Product features

Water Damage is the First Sign of Mold

Finding moisture is the first step in early mold prevention. High levels of moisture that go untreated are the main cause for harmful mold growth in the home.

With the MMD7NP pinless moisture meter by General Tools, scanning large areas of drywall and wood is easy with the pinless pad sensor. Quickly determine where your major problems areas are without making pin holes in your walls.

Worried about a leak? This meter can help you track it to its source. This can also be a great help in flood damaged homes. Use it to find where the water line truly stops so that you can remediate and stop future damage.

Product description

Extech MO210 Pocket Moisture Meter, 2-in-1 Digital LCD Readout and Analog Bargraph, Auto Power Off Conserves Battery Energy, Built-in Battery Check and Measurement Verification Test

This Pocket Moisture Meter from Extech allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%.

Key Features

• 2-in-1 Digital LCD readout and analog bargraph
• Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Replaceable threaded measurement electrode pins
• Self-contained, pocket sized meter with belt clip
• Auto power off conserves battery energy
• Battery operated for on-the-go measurements
• Built-in battery check and measurement verification test
• Complete with protective cap, replacement pins, and three CR-2032 button batteries

Specifications

• Wood Moisture Range: 6 to 44%
• Basic Accuracy: ±1%
• Other Building Materials: 0.2 to 2.0%
• Basic Accuracy: ±0.1%
• Measurement principle: Electrical resistance
• Electrode length: 0.3" (8mm)
• Electrode pins: Integrated, replaceable
• Auto Power Off: After approx. 15 minutes
• Operating Temperature: 32 to 104°F (0 to 40°C)
• Operating Humidity: 85% Relative Humidity maximum
• Power supply: Three CR-2032 button cells
• Dimensions: 5.1" x 1.6" x 1.0" (130 x 40 x 25mm)
• Weight: 3.5 oz (100g)

• 2-in-1 Digital LCD and analog bargraph
• Measures wood moisture and building material moisture
• Replaceable threaded mesurement electrode pins
• Impact proof housing
• Built-in battery check and measurement verification test

User questions & answers

Question:	Does it come with a case
Answer:	The MO210 does not come with a case. Greg M.
Question:	What's the moisture scale for drywall (e.g., what scale number is dry, what's elevated, and what's wet
Answer:	Best to google what condition your looking for. The thing you have to remember is that every material that can except moisture will try to go to whatever the humidity level the surrounding air is. Some material will transition to that moisture level quicker then others. So most materials will be whatever the average humidity level that the air around them will be. Materials in air that has no humidity will be very dry and materials in high humidity will be very low.
Question:	Please tell me how deep the probe need to go into the wall or wood in order for the meter to read accurately
Answer:	Probes are around 1/2" long. You can touch material to gauge external moisture level, or insert into any material for more accurate readings. There is no set spec. Manufacturer recommends inserting the pins as deep as possible.

• 3-IN-1 SOIL PH METER: You can use it to measure the moisture, pH value of the soil and sunlight intensity. It will be a good tool for your garden courtyard, enjoy the gardening and planting journey with ease.
• YOUR BEST ASSISTANT: Helps you specialize in planting: watering, adjusting pH, or changing light for your flowers, plants, both indoor and outdoor, all will make your plants growing healthy and strong.
• ACCURATE MEASUREMENT: Double-needle Detection Technology enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity, refuse to be a killer of plants, promote plant growth in a healthy way.
• EASY TO USE: Simply insert the probes into the soil about 4-6 inches (2/3 of the probes), toggle switch and wait for 10 seconds to read the intuitive data, convenient and fast, no battery required.
• Small and convenient to carry, applicable to home garden breeding , rice/vegetables/flowers planting, etc, meet all your needs for soil testing.【Tips: 1. This soil tester can not be applied to test pH value of any other liquid; 2. Do not use it to test very hard soil which will damage the probes.】

Product description

Moisture Pin Probe. Dual sharp pins with 0.4"/1cm pin length. Compatible with MO290/MO295/MO297 Moisture Meters.

• Package Dimensions: 6 L x 4 H x 1 W (inches)
• Package Weight : 0.15 pounds
• Country of Origin : China
• Compatible with MO290/MO295/MO297 Moisture Meters

User questions & answers

Question:	is this item also compatable with the bd
Answer:	Yes no problem
Question:	Does this work with the irvington moore mm
Answer:	I don't have any idea if it does. I have a Delmorst that it's used with and it works great! The only negative I have is the long pins are not as durable as I'd like.
Question:	should this meter be used in a bathroom with drywalled walls to detect moisture behind the walls
Answer:	You will need to drill holes on the wall, it should work for this application.
Question:	Does it Work Decently on concrete ? for Example i have water pipes behind concrete and is leaking. will this be able to confirm that
Answer:	Thank you so much for your interest in our products. The MR40 cannot penetrate objects to read moisture. This device will allow you to detect sources of moisture at the surface of walls or floors. If the leak is massive and you can see damage on the surface, the MR40 will help you to confirm the amount of moisture present at that point. However, It will not detect the source of the leak.
Question:	Can this be used outside on pavement or soil
Answer:	From what I understand in terms of moisture detection. These devices are mainly use on wood or concrete and not soil.
Question:	I want to know if the inside drywall is wet. i can look and feel to see if the outside is wet. doesn't sound like this will do it. what do i need
Answer:	Use the device as a penetration probe, that will read the moisture that it may be on the drywall
Question:	What all comes with this kit
Answer:	Thank you for your question, This kit includes a Moisture Meter, MR02 Pin Probe, Quick Start Guide, International Charger. If you have more questions, please go to https://flir.custhelp.com/ and click on where it says Technical support and then “ask a question”; we will be looking forward to hearing back from you!.
Question:	Mide humedad de azucares
Answer:	No this meter will not measure humidity of sugars. It is designed to be used with wood and building materials.
Question:	Does this work for cannabis
Answer:	No this meter will not measure humidity of cannabis. It is designed to be used with wood and building materials.
Question:	Can you measure surface soil moisture with this meter
Answer:	No. This instrument was not designed for that kind of test. A soil test does not need to be non-invasive.

Product features

Destructive or Non-Destructive Measurements

Integrated pinless moisture measurements for fast detection, and external pin probe included with expandable probe options.

Measures Many Different Substrates

Choose from 11 material group selections for pin-based readings.

Clear, Accurate Readings

Save up to 10,000 screenshots that you can transfer and view via PC/USB.

Color Display

Bright, easy-to-read display with large digits and color bargraph.

Programmable Alerts

Set a programmable alarm with audible and color visual alerts to notify you of high moisture.

FLIR Tools

Includes FLIR Tools professional reporting software for Mac or PC.

Durable

Can withstand a 3-meter drop.

Warranty*

FLIR's unique 2-10 warranty, covering parts and labor for two years and the detector for ten.

Flir mr40 moisture pen + Flashlight

The FLIR MR40 is a pocket-portable, 2-pin, single-scale moisture meter for wood and common building materials. It is ideal for builders, building inspectors, remodelers, moisture remediation technicians, pest control professionals, and residential roofing and flooring contractors. Providing reliable and accurate measurements offered at a highly affordable price point, the MR40 is a quick and easy-to-use tool to find and quantify moisture content. When used in combination with a thermal camera, the MR40 can help confirm whether a cold spot in a thermal image is moisture, and measure the severity of the problem.

Simple and effective for reliable measurements

The MR40 features a clear LCD display, a simple On/Off button with ‘Auto Power Off’, replaceable pins (includes 2nd set), and audible indication of measured range to provide you with the most reliable measurements.

Rugged, Portable design

The MR40 is ready to work when—and wherever—you are. It’s small enough to carry in your pocket and take measurements in tight spaces. It’s 3-meter drop-tested, IP54 splash-proof rated, and the meter operates at a temperature of 14°F to 122°F to handle the toughest jobs.`

Accurate measurements

Featuring a measurement ‘Hold’ function and a Calibration/Pin check integrated in the cap, the MR40 provides essential features and functions to quickly verify and quantify moisture.