14 best ge outdoor thermometers

Product description

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB20T10025 Heat Probe Or Gauge.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB20T10025 Heat Probe Or Gauge

• General Electric (GENF0)
• This is a genuine replacement part
• Cooktop-accessories
• Country of Origin: China

User questions & answers

Question:	Does this work with Profile Wall Oven JT915 models
Answer:	I have a PT925 oven so I can't give you an accurate answer. I looked up my part number and then googled it and on another site it listed all model numbers that it worked on. I also agree with a couple of other comments. GE too expensive and I believe most ovens have the same size port hole..
Question:	where to insert the oven temp.meat probe in the range model JGB760SEF2SS
Answer:	I cannot tell from pic where the jack is. However, if it's like mine, it's on the top right as you are facing the opening, toward the front.
Question:	this looks just like the probe for my kitchenaid # 9755542. Does anyone know if this would work for a replacement
Answer:	It works with GE. I don't if for Kitchenaid neither if the thermocouple junction is the same for different brand ovens.
Question:	Will this work with GE Model JGB920SEFSS? The GE website shows part number WB20X5050. But yours looks to be identical? Thanks in advance
Answer:	My range also specifies part number WB20X5050 for the meat probe. However, as you mentioned this one looks identical. So I ordered it. It fits into the jack in the oven, but unfortunately it consistently reads about 30 degrees too high. Not sure if mine is defective, but I think I will need to reorder the correct model number to be sure.

• Accurate reading: Wireless temperature and humidity monitor provides accurate humidity and temperature readings for both inside and outside simultaneously, accuracy within ±2 Fahrenheit and ±2~3%RH; Fahrenheit or Celsius selector
• Cold-resistant & waterproof: Weather thermometer hygrometer with completely sealed remote sensor contains rechargeable lithium battery technology to monitor humidity and temperature as low as -31 Fahrenheit/-35 Celsius, assuring transmission in rain or snow
• 500feet remote range: Indoor/outdoor thermometer wireless measures indoor outdoor temperature and humidity percentages from 500feet/150meter away; Synchronize up to 3 outdoor remote sensors, track environmental conditions in up to 4 locations with additional remote sensors; Search B08M8YLNNS to purchase additional sensors
• Backlit touchscreen: Remote thermometer with touchable backlight screen displays current indoor outdoor temperature and humidity percentages includes temperature/humidity trend arrows and max & min records for all time/24 hours, keeping you aware of the slightest changes in your living conditions
• Smart design: Wireless indoor outdoor thermometer features multiple placement options with a tabletop stand, wall-mount and magnetic back design; Batteries included

User questions & answers

Question:	Can the outside sensor be used in a pool to read water temp
Answer:	Responding to Joe Blow's response "probably not waterproof" - the title and description note that it's waterproof in several places. The question is, to what depth?
Question:	Does it support ifttt or alexa
Answer:	No, it does not support IFTT or Alexa.
Question:	What are the dimensions of the display
Answer:	about 3 by 3 inches
Question:	How does a “completely sealed” unit detect humidity
Answer:	Humidity is actually pressure checked and often verified against dew point calculations. Divide actual vapor pressure by saturation vapor pressure and multiply by 100 to obtain a percentage using the formula Relative Humidity (percentage) = actual vapor pressure/saturated vapor pressure x100. The resulting number indicates relative humidity.

Product features

ThermoPro TP63B Digital Weather Station with Wireless Outdoor Sensor

Equipped with professional grade rechargeable sensors, ThermoPro TP63B inside outside thermometer wireless provides accurate indoor outdoor temperature and humidity readings every 50 seconds up to 500ft/150m away, allowing you to be aware if adjustments are necessary for your household! No matter the situation, the wireless thermometer hygrometer with a backlight and touchable screen tells you what you need to know, at-a-glance, all in an attractive, compact digital display.

Backlight LCD Display

Backlight LCD screen with touchable button shows the current indoor outdoor temperature and humidity readings, makes it superbly easy to view in all light conditions, even at night; Celsius/Fahrenheit switchable.

Max & Min Records & Trend

Displays all time/24 hours MAX & MIN humidity and temperature records and trend arrows, keeping you aware of the slightest changes in your living conditions, helps you to make necessary adjustments in advance.

Multiple Mounting Options

Tabletop stand, wall-mount and magnetic back design, convenient mounting feature for every type of room.

• Large backlit touchscreen: 4 inches large lcd display features a backlit touchscreen, making the indoor outdoor weather station easier to read in dim light conditions and superbly simple to use
• Wireless temperature and humidity monitor: Measures indoor/outdoor temperatures and humidity percentages; Capable of displaying the readings from up to 3 outdoor remote sensors to monitor multiple locations; Temperature displayed in °f or °c
• Max and min records: All time/24 hours max and min temperature and humidity percentages recorded and displayed on humidity gauge; Temperature/humidity trend arrows indicate whether it’s getting warmer or colder or more humid near the remote sensor
• 200ft remote range: Indoor/outdoor thermometer wireless with 200ft/60m remote range, capable of strong signal penetration (enhanced 433 mhz); tabletop, wall-mountable and magnetic back design
• Multiple placement options: Digital outdoor thermometer, features a magnetic back to allow you to easily attach to any metal surface; a hanging hole for hooks, tabletop for any layout situation, which help you place your outdoor thermometer anywhere to fit your home's needs

User questions & answers

Question:	Is the display visible when not using the backlight
Answer:	Yes but poorly when you use the backlight, and it depends from what angle you are viewing it. It is excellent looking down on it from more than 10 degrees. Looking directly at it it is 90% visible. As you tilt it backward it rapidly becomes unreadable (looking up at it). I bought this to put on the wall of my rv and the backlight was completely useless
Question:	Where can I find the manual
Answer:	The unit that I received was the TP-65S. PDF version of this manual can be found here: https://buythermopro.com/wp-content/uploads/2018/06/Thermopro-EN-DE-FR-IT-ES-TP-65S-instruction-manual-20180503.pdf
Question:	Can this be set so that it doesn't scroll through all three sensors? i only have one sensor and i'd like it to simply display that outdoor temp
Answer:	I never had a problem with that. My only problem is the remote sensor is registering the wrong temperature. When I suspected this, i brought the monitor in and put it side by side with the main unit. Was off 4 degrees. My AC thermostat said 74, the main ThemoPro unit said 74, but the remote sensor was transmitting 78 degrees. So it's pretty much useless for what I bought it for.
Question:	how far away will the remote sensor read back to the unit
Answer:	The promotion materials on the Amazon website indicate 200'; with good penetration of walls, etc. Our sending unit is located about 50' away from the receiver; hung under a carport to better protect it from the weather; and the signal must penetrate a brick wall to enter the house. We are extremely pleased with it; particularly the large display and back-lighting features; which make it easy to read from across the room by a visually-impaired person. It will probably live up to the 200' straight-line distance claim; but might be affected by obstacles in the line-of-sight; such as parked cars, trees, walls, etc. Hope this is helpful.

Product features

ThermoPro TP65A Indoor Outdoor Thermometer Hygrometer

Equipped with professional grade sensors, the ThermoPro TP65A thermometer provides the most accurate measurements for indoor or outdoor, humidity or temperature, allowing you to be aware of any necessary adjustments for you household. The indoor thermometer and humidity gauge is not only highly accurate but also extremely user-friendly with a backlight for those last-minute nighttime checks on current readings before bed.

Wirelessly Track Up to 4 Locations

The receiver of the TP-65A hygrometer thermometer is capable of displaying the readings from up to 3 outdoor remote sensors to ensure you can monitor multiple locations at the same time such as your bedroom, baby's room and your surrounding outdoor temp.

History Records & Monitor Trends

Displays all time/24 hours Max & Min humidity and temperature records and trend indicators, so you always stay informed about changes to the surroundings around your sensor(s) even when you away from your outdoor thermometer.

Cold-Resistant and Weatherproof

With advanced rechargeable lithium battery technology, the outdoor sensor can resist cold weather and monitor temperature as low as -31°F(-35°C), whereas other non rechargeable sensors will stop transmitting during the winter months.

Super Large CD Display with Huge Numbers

4" large LCD display with huge numbers makes it extremely easy to read even at far distances and off angles. The touchscreen activated blue backlight is bright and makes the display easy to read even in low light conditions and automatically turns off after 15 seconds to conserve battery life. Low battery indicator when it's time to replace the existing batteries.

Rechargeable & Environment-friendly Deisgn

The remote sensor runs off a patent pending rechargeable lithium battery, which is recharged with a commonly found USB charging cable (Included). Saving you hundreds of dollars in replaceable batteries and reducing landfill waste.

Multiple Placement Options

Place your outdoor thermometer anywhere to fit your home's needs due to its compact figure and multitude of placement options: tabletop stand, magnetic back to magnetize your fridge, or use the wall hook.

Product description

Keep up with weather conditions with the Taylor Precision Products Humidiguide Dial Thermometer (12-Inch). Measure indoor temperatures or outdoor temperatures with humidity simultaneously with this thermometer/hygrometer. With all-metal construction, this gauge works well inside the home or on a patio or porch. Large digits and markings printed in bold black and red are easily visible from afar. Read temperatures from -60 to 120 degrees Fahrenheit (-50 to 50 degrees Celsius) and relative humidity levels from 20 to 90% with the dial's bright red pointers. Mount the thermometer/hygrometer indoors or outside with the built-in mounts on the rear.

• Measure indoor temperatures or outdoor temperatures with humidity simultaneously with this thermometer/hygrometer.
• With all-metal construction, this gauge works well inside the home or on a patio or porch.
• Large digits and markings printed in bold black and red are easily visible from afar.
• Read temperatures from -60 to 120 degrees Fahrenheit (-50 to 50 degrees Celsius) and relative humidity levels from 20 to 90% with the dial's bright red pointers.
• Mount the thermometer/hygrometer indoors or outside with the built-in mounts on the rear.

User questions & answers

Question:	What are the dimensions
Answer:	From the amazon listing page:Product DetailsProduct Dimensions: 12 x 2 x 12 inches ; 1 poundsShipping Weight: 2 pounds (View shipping rates and policies)Shipping: This item is also available for shipping to select countries outside the U.S.
Question:	I bought one of these and it has never moved from 60 degrees.It's 32 outside. Isn't there suppose to be a little coil thing on the back
Answer:	Yes
Question:	How do I mount it
Answer:	Easy to mount with either a couple of nails or screws. The mounting plates are thin enough to bend over the top and bottom of a lattice that I have on my patio. Less than five minutes for me to put up.
Question:	Can you please put packing in my second order so it does not come damaged also
Answer:	I have no idea what is going on with packing i ordered a beach nicknac and it came broken .of course I returned. It

Product features

Taylor 12” Thermometer & Hygrometer

Taylor offers an ideal combination of both temperature and humidity measurements in one 12” dial. The classic metal dial is versatile for both indoor or outdoor spaces. You don’t have to look twice for readings on the large 12” dial, thanks to the bold black number track on a bright white background and vivid red indicators. The thermometer has a wide temperature range of -60°F to 120°F/-50°C to 50°C and the hygrometer measure humidity ranges between 30-80%, making it perfect for all types of climates. Premium quality, silk-screened graphics will not fade or peel from weather conditions. The thermometer is weather resistant and shatterproof so it can be left up year round without worry of damage or inaccurate readings due to extreme temperatures. Place it in your home, garage, or yard for instant and accurate temperature and humidity readings.

Since 1851, Taylor has created quality weather instruments that provide accurate and precise measurements. For over 165 years, we have combined our legacy with innovative product design to develop weather products that meets every need.

Product description

Oversized and easy-to-read! Taylor’s 18” dial thermometer makes visibility forefront with bold black graphics. The 2” tall number track is large enough to be read across the yard and the bright red indicator clearly marks the temperature reading. The classic style is perfect for indoor and outdoor spaces. This thermometer measures temperatures between -60°F to 120°F (-50°C to 50°C), making it ideal for most climates. The durable metal frame and shatterproof lens are weather resistant and can withstand extreme cold and heat. For best results, do not place the thermometer in direct sunlight.

• The 18” thermometer is suited for indoor or outdoor use
• Easily monitor temperatures from a distance with bold black dial graphics
• Features a wide temperature range from -60°F to 120°F (-50°C to 50°C)
• Weather resistant and shatterproof construction
• 1 year limited warranty

User questions & answers

Question:	Can it be calibrated
Answer:	No but there is a solution. The little bracket that the coil spring is mounted to on the back can be rotated to align the needle to the correct temperature. There’s a small amount of glue that may need to be to separated between bracket and backing plate but for example on mine the glue was already separated, probably causes rotation during transportation. Simply rotate that coil bracket which is connected to the needle to the correct temperature, mine was still tight but you could add a drop of glue to secure it if needed.
Question:	Is this safe in garage
Answer:	Unless you are in Jay Leno's garage, why do you need an 18" thermometer that can be seen from 100' away???
Question:	Is the metal coil that operates the thermometer enclosed in any way? The open coil on our current one gets water in it and freezes, which keeps it from reading the temp accurately. We live in a very cold climate
Answer:	It works great...I have had temps down to 14 below and as high at 120 throughout the years that I have had this model...it works great...even in the freezing winters of NY--it has never frozen...I can't get to it to tell you if the coil is enclosed or not, it is out of reach, and I don't remember...but, I would buy this one again if a wind storm took this one away...it could happen...lol...It is the best one I have found over the years...nice big clear numbers...you will love it...
Question:	I want the back to have no plastic. Where the screws go must be all solid metal.Is the Back Metal or Plastic
Answer:	The back is aluminum / metal, there are 2 tabs to mount the unit, both are aluminum. One tab is located at the top center and the other tab on the bottom center. These tabs are not shown on the photo, but are able to easy to put out to allow the mounting with either screws or nails. I used screws. My only other advise - keep the clear plastic cover waxed, otherwise over the years, the cover yellows. I usually clean the plastic face cover twice per year with a simply soap and water. In the Spring and just before our cold Northern NY Winter apply a good coat of car wax acceptable to plastic.

Product features

Taylor 18” Extra Large Thermometer

The 18” extra-large dial thermometer allows you to easily keep up with the weather conditions at a glance. The bold black number track is large enough to be read from a distance and the bright red indicator clearly marks the current temperature. The thermometer measures a wide temperature range of -60°F to 120°F (-50°C to 50°C) making it ideal for climates ranging from the Alaskan tundra to the Arizona desert. Taylor’s dial thermometer has classic rustic charm and be used anywhere in or out of the home. It features a weather resistant metal construction and shatterproof lens so it can be left up year round without worry of damage or inaccurate readings due to extreme temperatures. Its mountable design make the perfect addition to any room, garage or patio.

When Taylor was founded in 1851, by George Taylor, he had a motto: accuracy first. Since then, our legacy has grown to include a wide range of measurement products to meet every need. We’ve been in the measurement business for almost 170 years… which is why Taylor is the brand you can trust.

Extra-Large Dial

Extra large dial face for greater visibility from a distance.

Mounting Instructions

Use two screws or nails (not included) to securely mount the thermometer. Place the top screw approximately 1” below where you would like the top of the thermometer and leave 3/16” of the screw head out. Place the top keyhole over the screw and slip down to secure. Bend the bottom hanger down to expose the keyhole and use a screw to mount securely.

Perfect Outdoor Decor

The extra large 18” dial thermometer is versatile and perfect for farms, schools, and even in your backyard!

Easy-To-Read Display

The dial face features 2” tall numbers which can be easily seen from over 30 feet away.

Product description

This simple, attractive tube shaped outdoor thermometer can mount on a wall, fence, window or windowsill of your house. It adjusts to the left or right so that you can set it at the best angle for viewing indoor or out. The frame and ends of the thermometer are made of steel, for durability, with a bronze finish on the thermometer top and bottom, and a dark finish on the mounting bracket. Vertical height is 10 inches, tip to tip. The clear optical plastic portion measures 6 1/4 inches in height. Includes 2 screws for mounting. This will become one of your favorite home thermometers once you see it in your garden, deck or patio. See the weather before you go outside.

• Steel construction with decorative bronze style finish, perfect for exterior or interior use.
• Features both Fahrenheit and Celsius readings. Metric nerds rejoice!
• Shatter resistant optical PS plastic lens tube. Includes 2 screws to mount inside or outside.
• Height is Approx. 10 inches, tip to tip. Small enough to fit, but large enough to read the numbers
• Optical plastic portion measures 6 1/4 inches in height.

User questions & answers

Question:	please explain why all products are not required to provide country of origin, then, require all products to clearly provide country of origon
Answer:	All Products have to provide a COA to the final purchaser
Question:	Do you send to Brazil
Answer:	no
Question:	Does it firmly set in 1 direction or will the wind blow it around. it
Answer:	The wind hasn't blown mine at all and it's been mounted for months. It can be adjusted but you'll need to do that by hand.
Question:	How wide is this item
Answer:	The tube is about 2", with attachment around 5". Mines not available. Inside fell apart after a year.

Product description

[1]. 4-inch dial face thermometer on swiveling mount [2]. Measures temperatures from -20 to 120 degrees Fahrenheit and -30 to 50 degrees Celsius, also 0-100% humidity, well monitor your outdoor thermometer and humidity [3]. Brass bezel, swivel, and mount, vintage color [4]. Durable, weather resistant construction Mounts easily with two screws

• outdoor thermometer & bimetal thermometer, easy to calibrate when remove the bracket
• dual function for temperature and humidity checking
• brass material with vintage function
• accurate temperature reading
• Important note: the product is suitable for shady place, DO NOT use under sun directly, due metal natural attribute, temperature will be higher in sun

User questions & answers

Question:	Where is it made
Answer:	It is Made in China, we are a more than 20 years manufactuer experience in this area. Emily
Question:	I will have to place this in direct sunlight part of the year. Will this ruin it
Answer:	It will not ruin it but you will not get an accurate reading of the ambient air temperature.
Question:	Can it be calibrated? Two people say no. Seller says yes. What is the answer
Answer:	Yes it can. These people that say it can't need to learn to read! Slide the mount out of the holder on the back and there is a small slotted screw for calibration..
Question:	It says this is an outdoor thermometer. However it has open slots on the back of it. Won't it fill with water when it rains
Answer:	I haven't looked at the back in a while (months). It said outdoors and that's where I put it. I can see it right through one of my windows It's been up through snow, ice, and rain, and I haven't seen any problems.

Product description

Transform any home into a smart home with the GE 40 Amp Z-Wave Plus Direct-Wire Indoor/Outdoor Smart Switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of On/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters. The Smart Switch can be used indoors or outdoors and features an easy access wire connection block, front mounted LED lights indicating power and On/off status, and an override switch to turn connected devices on or off manually. The Smart Switch is housed in a lockable, tamper-resistant case to ensure settings and wiring are secure. The rugged, weather-resistant design will keep out dirt and debris while being suitable for use in extreme weather conditions.

• WEATHERPROOF – A rugged, wall-mount, metal NEMA-3R enclosure with lockable door withstands the elements for outdoor use while protecting wiring and settings against tampering.
• UNIVERSAL USE – With multiple configuration possibilities, the double-pole/single-throw switch supports 120-277VAC and up to 40A. Up to two 120VAC device can be connected with options for single- or dual-load control.
• ENERGY MONITORING – Remotely track Watts and kilowatt-hours when connected to a compatible Z-Wave hub that supports energy monitoring.
• OPERATION MODES – An integrated toggle switch allows the choice of manual or remote operation with ON, OFF and Z-Wave modes. Indicator LEDs are visible on the front of the housing to display power status without opening the water-tight door.
• EASY-ACCESS WIRING – Clearly numbered screw terminals provide fast, secure connections and are protected from accidental contact by a clear plastic guard.

User questions & answers

Question:	Does this device need to have Nutral wire when running 220Volt
Answer:	the GE 12726 can have 2-120 VAC devices wired to it at the same time, however both can only be controlled together to turn on and off at the same time. They cant be controlled independently.
Question:	Does this device have a dry contact ? ( I need a timer for my float switch on the water tank
Answer:	Smartthings have their plugs you can use.
Question:	Can the exterior button be disabled so that it does not control the connected device? I wish to keep access restricted to the control
Answer:	The GE Bluetooth are only voice controllable with Alexa using the Avi-On RAB. Google Assistant is not an option at this time.
Question:	can you control multiple devices
Answer:	The GE Bluetooth devices only connect to a Smartphone or tablet using the Avi-On Application. It cannot connect to a laptop.

Product features

GE Z-Wave Plus Direct-Wire Indoor/Outdoor Switch

Transform any home into a smart home with the GE 40 Amp Z-Wave Plus Direct-Wire Indoor/Outdoor Smart Switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of on/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters.

Complete Control + Z-Wave Signal Repeater

Wireless control from smartphones, tablets, PCs and Z-Wave enabled remotes whether you are in your home or away!

40 Amp switch functions as a Z-Wave signal repeater in order to help strengthen and extend your home Z-Wave network.

Ultimate Flexibility

Remotely control the On/Off functions, schedule and customize scenes for large load, hard-wired applications - from anywhere in the world.

Z-Wave Hub Required.

Compatible Devices and Bulbs

Compatible with all LED, CFL, halogen, incandescent bulbs and large load hard-wired devices such as waters heaters, landscape lighting, spas, pool pumps and heaters

Energy Monitoring

Energy monitoring capability allows remote monitoring of watt- and kilowatt hours.

• Thermometer 10 inches in diameter ,used acrylic as interface and with black bold numbers inside which make it easy to read the temperature value from long distance
• This thermometer accuracy is between -40 and 140℉/-40 to 60℃ to suit all climates, and exquisite design can be used as an adornment
• The hooks on the back and the waterproof design make the thermometer suitable for study, garden, patio and any other occasions
• The product uses a plastic bottom case and an acrylic dial without any battery,there is no need to worry about rusting
• The thermometer will calibrate automatically,after 2 hours, the pointer will match the local temperature automatically.Please feel free to contact us if you have any questions about our products

User questions & answers

Question:	How does it automatically calibrate itself? It says this twice in the description. Just curious
Answer:	Yes，It is made using precision machinery,the pointer will match the local temperature automatically
Question:	Can the thermometer be waterproof
Answer:	Slightly waterproof, so that it’s best to put it in a place with an eaves outdoors.
Question:	Can it be left out in weather, rain, etc. all year
Answer:	I'm not sure but I believe so. I have mine in a sheltered location to protect from direct contact with inclement weather.
Question:	I need to mount it to stucco in an extreme wind environment (50mph+). Will it hold up to that without blowing off the wall
Answer:	No it will blow away

Product features

Living Room

Bed Room

House Porch

Grasp the Bedroom Temperature

• Summer room temperature: Around 73-77℉.
• Winter room temperature: Around 73-77℉.
• To control the temperature of the bedroom, do not dry or damp.
• Keeping humidity at 50% is more comfortable.
• Be sure to take care to prevent your baby from catching cold.

Grasp Air Conditioning Temperature

• When the room temperature is 77℉ in summer, the relative humidity should be controlled at 40-50%.
• When the room temperature is 66℉ in winter, and the relative humidity should be controlled at 60-70%.

Temperature and Humidity are Important Conditions for Flower Survival

• High temperature: no less than 53℉ at room temperature in winter.
• Medium temperature: no less than 41℉ at room temperature in winter.
• Low temperature: room temperature is not lower than 32 ℉ in winter.
• Wet flower: air humidity is not less than 80%.
• Medium wet flower: air humidity is not less than 60%.

Product description

The weather-resistant GE Choice Alert Wireless Alarm System Window/Door Sensor provides a layer of security for any door or window inside or outside your home, including gates, cabinets, refrigerators, sheds and more. The two-piece magnetic design is easy to install and requires no wiring. The sensor transmits a wireless alert to the Choice Alert Wireless Control Center whenever a door or window is opened or closed. An added bonus, the sensor is powered by a single lithium battery that provides up to 24 months of protection before it needs to be replaced. Installing the sensor couldn't be any easier. Using the included double-sided tape or screws and mounting plate, you can install the sensor on almost any door (interior or exterior), gate, or window within minutes. There's no wiring involved--the sensor wirelessly transmits alerts to the Choice Alert Wireless Control Center within a range of 150 feet. The Choice Alert Window/Door Sensor can be paired with any of the Wireless Control Center's four zones in just a matter of seconds. Zones One through Three provide alarm protection, while Zone Four is a dedicated alert zone that generates a visual alert along with a continuous beeping alert to discreetly warn you that the zone has been compromised. The GE Choice Alert Wireless Alarm System Window/Door Sensor is part of the GE Choice Alert Wireless Alarm System line of products. Cost-effective and easy to install, Choice Alert components offer wireless operation, multi-zone coverage, home and away settings, all-weather function, and expandability for complete home protection. With wireless capabilities, Choice Alert products require no complicated wiring, drilling or expensive installation costs. And because they are designed to be part of a self-contained system, there are no monthly usage charges. System components are simple enough for anyone to use, and can be combined to provide a customized blanket of protection over your entire property. Perfect for homes and offices.

The weather-resistant GE 45131 Choice Alert Wireless Door/Window Sensor provides a layer of security for any door or window inside or outside your home, including gates, cabinets, refrigerators, sheds, and more. Its two-piece magnetic design is easy to install and requires no wiring. The sensor transmits a wireless alert to the Choice Alert Wireless Control Center whenever a door or window is opened or closed. An added bonus, the sensor is powered by a single lithium battery that provides up to 24 months of protection before it needs to be replaced.

Note: This product must be used with the GE 45129 Wireless Control Center or with the GE 45142 Wireless Control Center Starter Kit (each sold separately). The GE 45131 Window/Door Sensor can work alongside other wireless Choice Alert components as part of a GE Choice Alert Wireless Alarm System.

Part of the GE Choice Alert Wireless Alarm System

The GE 45131 Window/Door Sensor is part of the GE Choice Alert Wireless Alarm System line of products. Cost-effective and easy to install, Choice Alert components offer wireless operation, multi-zone coverage, home and away settings, all-weather function, and expandability for complete home protection.

With wireless capabilities, Choice Alert products require no complicated wiring, drilling or expensive installation costs. And because they are designed to be part of a self-contained system, there are no monthly usage charges. System components are simple enough for anyone to use, and can be combined to provide a customized blanket of protection over your entire property.

Wireless Control Center for Sensor Monitoring

The entire Choice Alert Security System is designed around the Wireless Control Center, the system's hub. The Control Center monitors each and every sensor that is wirelessly connected to it. As many as four sensors can be programmed in each of four zones, giving you the security of up to 16 sensors to guard your entire home, including sensors for doors, windows, gates, water leaks, and motion detection.

The Wireless Control Center allows you to secure your system with a custom four-digit code that can be changed at any time. Plus, the center lets you control many system features. For example, you can select 'Home' mode for an instant alarm and 'Away' mode for a delayed alarm. In addition to the armed alarm system, the Control Center also offers a visible and audible Zone Notification alert system (with a choice of continuous alert or single chime mode) and a dedicated alert zone (Zone 4). The center wirelessly transmits and receives signals up to 150 feet.

Additionally, the Wireless Control Center features a low-battery indicator that will alert you when battery power is low in a specific zone, so you'll know exactly when to replace the batteries in every one of your components.

Combine Components for Total Home Coverage

To complement the Window/Door Sensor, there are several components available for use with the Wireless Control Center, including a water leak sensor, a motion detector, a secondary audio alarm siren, a signal repeater (for enhanced wireless range), a garage door sensor, and a Silent Alert LED indicator. Add up to 16 sensors and give yourself the peace of mind that only complete home protection can provide.

All-Weather Security that Installs Within Minutes

Installing the GE 45131 Window/Door Sensor couldn't be any easier. Using the included double-sided tape or screws and mounting plate, you can install the sensor on almost any door (interior or exterior), gate, or window within minutes. There's no wiring involved--the sensor wirelessly transmits alerts to the Choice Alert Wireless Control Center within a range of 150 feet.

The Choice Alert Window/Door Sensor can be paired with any of the Wireless Control Center's four zones in just a matter of seconds. Zones One through Three provide alarm protection, while Zone Four is a dedicated alert zone that generates a visual alert along with a continuous beeping alert to discreetly warn you that the zone has been compromised.

The GE Choice Alert Window/Door Sensor is backed by a one-year limited warranty.

What's in the Box

GE 45131 Window/Door Sensor with magnetic contact, two screws, two screw caps, two plastic anchors, mounting plate, and two double-sided pieces of tape.

From the Manufacturer

The weather-resistant GE Choice Alert Wireless Alarm System Window/Door Sensor provides a layer of security for any door or window inside or outside your home, including gates, cabinets, refrigerators, sheds and more. Cost-effective and easy to install, Choice Alert components offer wireless operation, multi-zone coverage, home and away settings, all-weather function, and expandability for complete home protection. Perfect for homes and offices.

• Provides a layer of security for any door or window inside or outside
• Easy to set up and use - no wiring
• Innovative two-piece magnetic device alerts you when a window or door is opened
• Operates up to 150 feet away from the Choice Alert Wireless Control Center
• Durable, weather resistant design

User questions & answers

Question:	Does this product make a loud beep when you push the buttons? Or can you push the buttons and disarm without the loud beep of pushing the buttons
Answer:	3 in 1 pack. Lol. Odd question. They're individually wrapped.
Question:	Do you need one Repeater per signal devise or one repeater per zone
Answer:	The plug into the car charger spot doesn’t hang on vents
Question:	Does the window sensor have an on/off switch? My teen has been sneaking out at night, I just want to make sure she cannot disable the sensor
Answer:	Not sure if you meant device and scent separately...if that was your intent, then yes they can be bought separately
Question:	What kind of batteries does this device use
Answer:	Aside from a few American Cars most other vehicles shut off the 12v plug within a few seconds of the car being turned off, Ford being the main one I've seen run it 24/7 but even then 1 or 2 days won't kill your battery if it does your battery is probably dying already.

Product description

NOTE: DO NOT use the Thermometer/Hygrometer under rain, use it in a dry and comfortable environment to keep it in accuracy. 

PECIFICATIONS -Weight: 0.38kg

Temperature measurement range: -40℃ to 60℃  (-40℉ to 140℉) -Temperature resolution: 2 (℃) 

Temperature measurement error: +/- 2 (℃) 

Humidity measurement range: 0 to 100% (RH) 

Humidity measurement accuracy: 2% (RH) 

Humidity measurement error: +/-7% (40% to 70%) (RH) 

Dimensions Diameter: 203(mm)/8(in.) 

Thickness: 43(mm) -Material: PVC plastic bottom case with brown copper paint, trasparent glass lens, with Temperature and humidity sensing elements of high precision materials. SHIP LIST

Thermometer / Hygrometer *1

• 10 inches diameter indoor and outdoor large thermometer and hygrometer (humidity measurement) to monitor weather condition.
• Only black and white design to show more simplicity and elegance, suit for home, office, factory, warehouse, porch etc..
• Large and transparent acrylic instrument surface display , for easy reading from a long distance.
• Temperature range from -40 to 60°C, -40 to140℉, both Celsius and Fahrenheit are available; humidity range from 0 to100%RH.
• Automatic calibration within 2-3 hours, feel free to contact us if you have any problems.

User questions & answers

Question:	How to place?What is the hanging bracket like
Answer:	It's a slotted hole in the back of the case
Question:	How to mount this thermometer
Answer:	There is a hole you can hang it up with a hook or nail.
Question:	How doesit read outdoor temperature
Answer:	You hang it outside and it shows the temperature..
Question:	This is for a humid environment，Any anticipated problems
Answer:	I live in humid Florida and everything is fine.

• The hooks on the back and the waterproof design make the thermometer suitable for study, garden, patio and any other occasions
• Black bold numbers inside which make it easy to read the temperature value from long distance
• This thermometer accuracy is between -40 and 140℉/-40 to 60℃ to suit all climates, and exquisite design can be used as an adornment
• The thermometer is detachable for easy cleaning and carrying
• After 2 hours, the thermometer pointer will match the local temperature automatically.Please feel free to contact us if you have any questions about our products

User questions & answers

Question:	The hands are loose and flop back and forrh. How do I get it to tighten in order to set the temperature
Answer:	I don’t know the answer to that question
Question:	What is the "diameter" of the thermometer? The part with the numbers
Answer:	The diameter of the thermometer face is 6 inches across.
Question:	The flier that came with the thermometer stated "This product is recommended for indoor use". Why? Product description said "indoor outdoor
Answer:	I placed my thermometer inside a covered patio.
Question:	What material is this? Plastic, metal, resin
Answer:	Metal

Product features

Living Room

Bed Room

House Porch

Grasp the Bedroom Temperature

• Summer room temperature: Around 73-77℉.
• Winter room temperature: Around 73-77℉.
• To control the temperature of the bedroom, do not dry or damp.
• Keeping humidity at 50% is more comfortable.
• Be sure to take care to prevent your baby from catching cold.

Grasp Air Conditioning Temperature

• When the room temperature is 77℉ in summer, the relative humidity should be controlled at 40-50%.
• When the room temperature is 66℉ in winter, and the relative humidity should be controlled at 60-70%.

Temperature and Humidity are Important Conditions for Flower Survival

• High temperature: no less than 53℉ at room temperature in winter.
• Medium temperature: no less than 41℉ at room temperature in winter.
• Low temperature: room temperature is not lower than 32 ℉ in winter.
• Wet flower: air humidity is not less than 80%.
• Medium wet flower: air humidity is not less than 60%.

Product description

GE Protimeter Mini is a compact, general purpose pin type moisture meter used for assessing moisture conditions in buildings. The Protimeter Mini can be used for making rapid moisture assessments in a wide range of building materials including wood, masonry, drywall, plaster and concrete. The instrument measuring pins are small and sharp which means measurements can be taken at the surface with virtually no mark left behind. The numerical values represent the actual percent moisture content of wood (percent MC) and the wood moisture equivalent (WME) of other materials. The Protimeter Mini can be used to determine if the fabric of a building is in a dry, borderline or damp condition. When taking readings in awkward positions, the Protimeter Mini can be used with the moisture probe and lead, supplied as standard with the instrument. The optional Protimeter Hammer Electrode can also be used with the Protimeter Mini for determining moisture gradients in wood. Typical users include: home inspectors, flooring contractors, termite pest control officers, wood product manufacturers and traders, cleaning and floor restoration professionals, woodworkers. 24 months warranty on mechanical or manufacturing defects. Does not include wearing part or accessories.

• Bright LED display for clarity
• Durable and rugged design
• Color coded moisture scale for simple classification of dry, borderline or damp conditions in materials
• Comfortable to hold and easy to use
• Auto shut off for increased battery life

User questions & answers

Question:	Does this unit have a sensor to detect without the pins
Answer:	If you mean "to detect moisture without the pins," then no.
Question:	This unit comes with the extender probe as pictured, correct
Answer:	Yes, that's right. The protimeter comes with extender probe.
Question:	Hey, is this a ge protimeter with different markings
Answer:	Hello, The Protimeter Moisture Meter line was acquired by Amphenol Advanced Sensors in December of 2013. The Relationship to/with GE ended at that time. InspectorTools Customer Service
Question:	could we used protimeter mini BLD 2000 for testing moisture content of brickwork wall
Answer:	mine only works on drywall. It won't penetrate wood