12 best kreg miter saws

Product description

Kreg KMS8000 Precision Trak and Stops Kit

The Kreg Precision Trak and Stops Kit lets you set a stop cursor to your needed board length and cut the board exactly to length without worrying about measuring or cutting errors. It can be used with miter saws, radial arm saws, drill presses, and other tools. The kit includes eight feet of trak, measuring tapes, a flip stop, and a production stop.

From the Manufacturer

Perfect for your miter saw, radial arm saw, drill press and more! Stop measuring&no.8230; and start cutting. Simple set precision stop cursor to board length needed, place board against stop and cut exactly to length. No more measuring errors and no more guessing if should take the line, leave the line or split the line! Kit contains 8-Feet of Trak, measuring tapes, flip stop and production stop. Also includes detailed plans for building miter saw wings form melamine.

• Lets you cut boards exactly to length
• Prevents measuring or cutting errors
• Use with tools such as miter saws and drill presses. Cutting Capacity - 96 inch (2438mm) minimum
• Includes 8-Feet of track, measuring tapes and flip and production stops
• Aircraft grade aluminum

User questions & answers

Question:	Does this system cater for metric measurements
Answer:	I would try them on in a store or check the Nike size chart on their website.
Question:	cuantos rieles trae
Answer:	Hello Or Many, Thanks for your inquiry about our product. No, it will not fit. Also, note that this adapter is intended to connect our 1-1/4” accessories to our 2-1/2” Workshop hoses. If you have additional questions or concerns, you may call Customer Service at 1-888-455-8724 from Monday to Friday between 8:00 AM to 5:00 PM Central Time. Thank you, WORKSHOP® Customer Support
Question:	Will this work with DEWALT DWX726 Rolling Miter Saw Stand
Answer:	Hard plastic
Question:	The necessary box dimensions are
Answer:	The inside diameter is 2.25 by 1.0

Product features

Precision Trak & Stop Kit

Take the guesswork—and your tape measure and pencil—out of cutting wood to length. Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you'd like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!

Perfect for a Variety of Applications

The most common setup for the Precision Trak & Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak & Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method.

Production Stop

Designed to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.

Swing Stop

The Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.

Rigid Aluminum Fence

Our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3/4" thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2' long sections, giving you setup options: 4' on each side of the saw, 2' on one side and 6’ on the other, or all 8' on one side.

Product description

Cut perfect miters consistently with Kreg's Precision Miter Gauge System. A number of unique features makes this one of the most precise miter gauges on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. A 24" fence section with patented Swing Stop and self-adhesive measuring tape is included. Factory calibrated.

We’ve found that even on high-end saws, the miter gauge is sometimes not the best it could be – a situation easily resolved by the folks at Kreg. You probably know them for their ingenious pocket hole system, but this miter gauge is worthy of fame in its own right.

It’s not like any we’ve seen before, with a handful of features that work together to give you the ability to set an angle cut accurately to 1/10th of a degree – and beyond that, to adjust to 1/100th of a degree (hats off to you if you’re that precise!)

Setup takes a little bit of time and patience, but the results are well worth it. It’s got a super accurate length scale with a magnifying lens cursor, similar to those on good table saws, and the curved flip stop can be used with the fence as is, or you and a pair of pliers can modify it easily for permanent use with a sacrificial fence. This clever curved design lets you slide your stock right under it. The slot bar has five patented nylon screws along its length that let you custom fit it to your table saw slot, completely eliminating any play.

It’s got the positive stops you expect, at 0, 22.5, 30 and 45 degrees, and they’re marked by preset holes that accept a tapered brass pin, which locks in the angle with absolute precision. The gauge is marked with diamonds every five degrees for great legibility, too. But what sets this gauge apart from the pack is its Vernier scale, allowing you to set any angle in tenth-of-a-degree increments. Unless you have a degree in mathematics, don’t try to understand the process – it’s confusing and non-intuitive. Instead, just follow the step-by-step directions, and you’ll get absolute accuracy every time.

And when Kreg calls something a "micro-adjustment" mechanism, they really mean micro. With this miter gauge, you can actually increase your angle by 1/100th of a degree by turning a nylon screw that increases the space between the fence and the gauge. For each .001 inch you put between the fence and gauge, you increase your angle by 1/100th of a degree.

Kreg’s really hit the accuracy bullseye with this miter gauge, and adding it to even a so-so saw will give you fantastic results. Take your time with setup and follow the directions for the Vernier scale, and you’ll be as taken with it as we are. -- Kris Jensen-Van Heste

From the Manufacturer

Cut perfect miters consistently with our Precision Miter Gauge System. A number of unique features make this the most accurate miter gauge on the market today. Precision starts with the gauge head that is machined on a computerized milling machine for absolute accuracy. An easy-to-read Vernier scale enables quick adjustment up to 1/10th of a degree to assure the perfect miter. Includes Precision Miter Gauge, 24-inch section of Heavy Duty Trak, Standard Flipstop and a self adhesive measuring tape.

• Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
• Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
• Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
• Microadjuster allows additional angle adjustment to 1/100th degree
• Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty

User questions & answers

Question:	Will this miter gauge fit the slot in a Sears
Answer:	The bit itself will last a lifetime as long as you do not abuse it or break the tip off. HOWEVER, regardless of what some have stated here, the sharpness of the bit itself is relative to the types of wood you use. In soft woods such as pine, it will stay sharp for quite sometime. However if it is used in woods that are abrasive such as qrt sawn white oak, or white oak in general, Bubinga, Purple Heart or other such woods, it will dull quickly and have to be sharpened. You can send the bit to Kreg and they will sharpen it for you for $10.00 bucks plus $10.00 shipping. That's $20.00bucks, but when you add in what it us going to cost to ship that one bit to them, which right now is $7.13 you are going to pay $27.13 for a bit that you can buy for much less. As a PROFESSIONAL Master Joiner and Cabinet Maker, I use this system quite regularly and have done so since Kreg first began to sell them. I know how to sharpen them and do not send them out, nor would I. It's not cost efficient.
Question:	Will this item work on a grizzly table saw go
Answer:	The "extra items" are some screws & plugs. Yes, there is some value, but it is limited. The K5 is an easier tool to use and you will need to purchase many more screws & plugs according to the way you use it. A handful of screws & plugs is nice to give you some idea of what is available, but will not last long. Frankly, I don't understand why they still price the 4 & 5 the same, or, even why the 4 is still offered.
Question:	Would this be good at doing wider board crosscuts
Answer:	I've used and owned various Kreg jigs (K2000, K3, K4 and K5). They have gotten better with each new model. An exception to this was the K3 versus the K4. I liked the K3 better than the K4 because of the clamping lever in the front (K3) versus the back (K4). The K2000 also had the lever in the back. It is better to have the clamping lever in the front especially when working with larger work pieces. It is good to see Kreg go back to the front lever. I like the K5 best because of the ratcheting clamp. You don't get a face clamp like you do with the K4MS Jig Master System, but the Automaxx clamps are better anyway. I like the 6" better than the 3" clamp. The right angle clamp works great for assembling cabinets also. If you are going to be doing small work (1/2" or less) get the Micro Drill Guide and large work (11/2" & larger) get the HD Jig. They will fit in the K3,K4, or K5 Jigs. To make a long story short get the K5 Jig over the K4 Jig.
Question:	Will this work with dewalt 10" portable table saw
Answer:	Both the blue body is plastic and a metal ruler with a brass screw to hold the ruler in the selected slot you choose from T square 45 angle or depth gauge Regards David

Product features

Precision Miter Gauge System

Why spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22½°, 30° and 45° to make it easy to cut accurate miters quickly.

Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.

Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.

Perfect Miters, Fast!

We worked to build accuracy into every feature of this product, from the rugged aluminum fence to the solid yet versatile Swing Stop, to the easy-to-use yet amazingly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.

Precision Lens Cursor

Similar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time.

No Play in the Miter Slot

Our extremely straight 24" (610mm) anodized-aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide and features five bar adjusters that you can use to eliminate 'play' in the miter slot with the turn of a screwdriver.

Swing Stop

The Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it.

Product description

Kreg Crown-Pro gives trim carpenters and DIY enthusiasts alike a fast and easy way to add beautiful looking crown molding to any room in the house. Adjusts for any spring angle between 30 and 60 degrees Easy to use for inside and outside corners Works with crown molding up to 5-1/2" wide Includes Angle Finder to ensures accurate results

• No compound cuts necessary
• Eliminates coping of joints
• Curved design matches any spring angle
• Angle-finder included
• Compact design works with most miter saws

Product description

Cut perfect miters consistently with our Precision Miter Gauge. A number of unique features make this the most accurate miter gauge on the market today. Precision starts with the gauge head that is machined on a computerized milling machine for absolute accuracy. An easy-to-read Vernier scale enables quick adjustment up to 1/10th of a degree to assure the perfect miter.

• Factory Calibration. Guaranteed out of the box to .003 accuracy of 6"
• Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
• Vernier scale allows fast, 1/10th degree angle adjustments
• Microadjuster allows additional angle adjustment to 1/100th degree
• Postive stops at 0, 10, 22-1/2, 30 and 45 degrees

User questions & answers

Question:	Will this work with the Kreg Router table
Answer:	They would not fit in my Nike Golf shoes.
Question:	How long is the miter bar
Answer:	Yes my daughter has the bike track shoes. They work fine. She said she noticed they were dull like in the beginning but if she ran one practice they were on par and sharp.
Question:	this item fits the 0.275 inch groove table for the dremel moto saw MS
Answer:	These are designed only for track and cross country shoes. They most likely won't fit into golf shoes as well as they could do damage to the course and the cart as they are metal and golf spikes are plastic.
Question:	Is this supposed to come with the nylon adjustment screws, if not where do o get them, mine did not
Answer:	Yes, I think so

Product description

The Top Trak is a rugged anodized aluminum extrusion that can be used to create a precision measuring system for your mitersaw, drill press, table saw and more. It features a self-aligning L-shaped mounting foot for easy attachment to a shop-made 3/4" thick fence.

From the Manufacturer

Top Trak mounts to the top-side of a shop-made 3/4" thick fence. Accepts the head of a standard 1/4" bolt. Features a self aligning L-shpaed mounting foot for easy installation to a shop-made fence. The top of the trak contains a recess for attaching a 1/2" wide self-adhesive measuring tape. 4' Section.

• Mounts to 3/4-inch fence
• Accepts head of standard 1/4-inch bolt
• Self aligning L-shaped mounting foot for easy installation
• Recess for 1/2-inch measuring tape
• 4-foot length

User questions & answers

Question:	Is this the Kreg Blue anodized track
Answer:	I don’t know about the Nike Zoom Victory 3 but the worked on the NIKE ZOOM RIVAL M 8 and they matched what came on the shoes
Question:	Can this be mounted directly to a work bench and used for clamping
Answer:	Standard thread design. Fit daughters Nike track shoes perfectly.
Question:	Does Kreg make the othe part of this. I am making a new top for the saw. I need the track also. I do not want a t track. I just want a miter track
Answer:	They do. Usually all spike fit all Nike shoes. The size of the spike is just the length of the "actual" spike sticking out of the sole. But they are generally fit all nike shoes.
Question:	Can any other t track be used or do i specifically have to use this one, with the kregg block
Answer:	No.

Product features

Top Trak - 48"

Product description

Identical to the adjustable bar that comes standard on the Kreg precision miter gauge, the Kreg 30-Inch Jig and Fixture Bar features five adjusters along the length of the bar to take up any play in the miter gauge slot of your table. Ideal for building workshop jigs and fixtures, mounting holes are located every 4 inches along the length of the bar. The bar is backed by a manufacturer's limited 30-day warranty.

From the Manufacturer

This is the same adjustable bar that comes standard on the Kreg Precision Miter Gauge. 30" long with 5 adjusters along the length of the bar to take up any play in the miter gauge slot of your table. Perfect for building workshop jigs and fixtures.

• Reliable and accurate jig and fixture bar
• Ideal for building workshop jigs and fixtures
• Mounting holes located every 4 inches
• 30 inches long
• Manufacture's limited 30-day warranty

User questions & answers

Question:	is it steel or aluminum
Answer:	Yes is your choice
Question:	Does it require a 3/4" thick jig base to screw into or are the mounting screws sufficiently short for a 1/2" base
Answer:	Hello, This Kit will come with 4 2' rails. Thank You, Billy H Kreg Tech Support
Question:	What are the actual dimensions of the bar stock
Answer:	I have mine set up on permanent saw wings and I still notice a slight difference between the two 8' wings and the Delta 10" Slider Fence and the wing backstops 1/32" depending on moisture conditions. I think fold able would be worse than that because of the additional flexing. I do have the 2x4 backstops on the wings secured with Kreg pocket screws every 12" as well as the base supports attached to the cabinet base.
Question:	What size are the nylon set screws? I tried M5 but they were tight after a couple of threads
Answer:	I'm not sure that I understand exactly what you are asking. I used the Trak to create a miter saw extension wing, not a box. Of course you could consider the extension wing a 2-sided box, with one side down and the other as the fence. Each piece of aluminum rail is 24 inches long by an inch and something high. The instructions in the kit said to cut the "fence" exactly 2-1/4 inches high. That way the stops would rest at the right height on the wing and againzt the fence.Did this answer your question?

Product features

Kreg KMS7303 30-Inch Jig and Fixture Bar

Miter-Gauge Bar with a Precise Fit

If you're building jigs and fixtures for your table saw, router table, band saw, or other tools with a miter slot, you need a miter-gauge bar that fits precisely (in a standard and slides smoothly. The Jig and Fixture Bar does both.

Built-In Adjustablility

Six nylon screws along the length of the bar adjust with the simple turn of a screwdriver to take up any play in the miter gauge slot. That lets you get an exact fit and retain it over years of use.

Great Versatility

This long bar has mounting holes every 4" (102mm) along its length that allow you options for mounting your fixtures.

Product description

Kreg KMA2800 Crown-Pro Crown Molding Tool

From the Manufacturer

Installing crown molding is one of the best ways to add instant value to your home. The Kreg crown-pro simplifies the most frustrating steps of the process so you make fewer mistakes and get the job done faster. This uniquely designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts and difficult coping. It's unique curved design lets you compensate for a wide variety of crown molding spring angles, and it's extension arms let you work with crown up to 5-1/2-Inch wide.

• No compound cuts necessary
• Eliminates coping of joints
• Curved design matches any spring angle
• Angle-finder included
• Compact design works with most miter saws

User questions & answers

Question:	I see comments about the base moving, fingers being too close, etc. Is it possible to clamp the jig or wood to make it safer
Answer:	Hello, The answer is yes. The KMS7101 does work with both our Bench Top and floor model Precision Router Table System. Thanks!
Question:	Can it be used on a vaulted ceiling
Answer:	The overall length of the bar is 24". From the front face of the fence to the end of the bar is 18".
Question:	WHAT ANGLE DO I SET SAW FOR 90 DEGREE ANGLE
Answer:	No, it is far too big. The width of the mounting bar on the Kreg Miter Gage is 0.75" (3/4"), which is the standard for full size woodworking equipment. I suspect that the entire miter gage would be bigger than the Dremel Moto Saw MS20.
Question:	does it include the protractor
Answer:	If you are missing parts please contact the Kreg Technical Support Team at 1-800-447-8638 M-F 8-5 CST or at [email protected].

Product features

Crown-Pro

Exact Angles

This uniquely-designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts and difficult 'coping.'

Versatile & Compatible

Its curved design lets you compensate for a wide variety of crown molding spring angles, and its extension arms lets you work with crown up to 5-1/2" (140mm) wide.

Easy Angle Finder

The Crown-Pro comes with an adjustable Angle Finder that easily shows you the exact angle of inside and outside corners. Plus, you can use the Angle Finder to check the spring angle of your crown molding.

Product description

The Kreg Adaptive Cutting System Saw and Guide Track Kit provides guided cutting for always straight and smooth cuts. An excellent tool combination for cutting solid wood and sheet goods, it provides unparalleled control with a cutting capacity up to 50". Conveniently, the 62" Guide Track stays in place without clams, while the Plunge saw cuts up to 2 1/8" deep at 90° and 1 1/2" at 45°. Safety is ensured with built-in features that protect against binding and kickback, so you can cut with confidence.

Specifications

• Plunge Saw
• Motor: 12-amp, 120-volt variable speed motor with load compensation and electronic brake
• Cutting depth
• 2 1/8" maximum cut at 90°
• 1 1/2" at 45°
• Bevel capacity: -1° to 47°
• Guide Track
• Material: Anodized Aluminum with anti-chip strip, dual anti-slip strips, dual saw glide strips
• Cutting capacity
• 50" when used off of Project Table
• 48" when used on Project Table
• 112" when paired with a second 62" Guide Track

In the Box

• Kreg Adaptive Cutting System Plunge Saw
• Plunge saw
• 48-tooth carbide-tipped blade
• Dust-collection bag
• Carrying bag
• Kreg Adaptive Cutting System 62" Guide Track
• 62" Guide Track
• Cord Manager
• Owners Manual

• POWERFUL: Cuts plywood, solid wood boards and other sheet goods
• EFFECTIVE: Delivers straight, splinter-free cuts up to 50" long
• USEFUL: Cuts up to 2 1/8" deep at 90° and 1 1/2" at 45°
• SAFE: Built-in safety features protect against binding and kickback
• VERSATILE: Can be used alone or with Project Table Kit

User questions & answers

Question:	Is this the same track as the Accu-cut? I have that system already
Answer:	Completely different, and far superior. Honestly, my ACS was a game changer. Incredible value in this system.
Question:	Is this capable of making glue ready cuts
Answer:	Yes, it comes with a fine tooth blade which allows you to make glue ready cuts.
Question:	Would this cut nice and clean thru a 2” river table (hardwood and epoxy
Answer:	Yes it will, with that said you may want to do it a two passes it will be easier on the motor. It would do it in one pass
Question:	Can you cut hardwoods with this? What's the max thickness you should cut on it
Answer:	I’ve cut 8/4 maple. Did surprisingly well even with the stock blade. Actually barely any burning which is impressive on maple that thick.

Product description

Get miter saw quality from your circular saw! The Crosscut Station gives you the capabilities of a miter saw with just a circular saw and Kreg® guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12" at 90°). Make a variety of angle and miter cuts from 0° to 45° with the adjustable fence and positive stops at 0° and 45°. An MDF base and SureCut™ backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blade’s path and know exactly where your saw will cut every time. Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go.

• Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0° to 45°
• MDF base and backboard act as sacrificial surface for splinter-free cutting
• A kerf line you cut into the MDF base shows exactly where your saw will cut
• Material support wings with detachable blocks add offcut support for long pieces
• Works with left- or right-blade circular saws

User questions & answers

Question:	I take it you can use any circular saw, correct
Answer:	That track isn't designed for clamping; even if you managed to find a clamp with a T-bolt that would fit, it might pull the bolt up through the track because the aluminum isn't very thick. We only recommend using our bench clamps with one of our clamp tracks or clamp plates, which are all shown here: https://www.kregtool.com/store/c7/clamping-solutions/Ben BolluytKreg Tech Support
Question:	Can the blade be angled for a bevel cut
Answer:	I don't know what you mean by "other part", but you can buy a miter track from any Seller and it will work just as well as Kreg if they sell one and they probably do.
Question:	Will it work with a 6 1/2" saw
Answer:	We can't guarantee compatibility with other brands of tracks, sometimes they don't work. However, if you're referring to our black plastic clamp blocks (KKS1030), those aren't intended for the Top Trak anyway; they're made for our clamp tracks (KKS1020, KKS2745 & KKS2769). Feel free to contact us directly at 800-447-8638 with any further questions.Ben BolluytKreg Tech Support

Product features

Make crosscuts up to 12" and a variety of miter cuts

Using just a circular saw, you can get miter-saw quality cuts without the miter saw.

Guide Rails and Adjustable Fence

Get straight, precise crosscuts by following the aluminum guide rails. Or make a variety of angle cuts by lining up your saw with the Adjustable Fence and molded-in angle alignments.

SureCut Backboard

With the MDF base and SureCut backboard, you’ll get splinter-free results on your crosscuts and miter cuts. The MDF acts as a sacrificial surface that reduces tearout.

Material Support Wings

Cut long material safely and easily. Just fold out the wings, or move the repositionable blocks to support even larger workpieces.

Product description

Turn an ordinary Circular saw into a precision edge-guided cutting tool



great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your Circular saw plus the Rip-Cut Circular saw edge guide.

with a built-in measuring scale, You don't have to measure and mark each cut, either. Just Lock the saw sled at your desired cut width, and you're all set, Whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.

• Make rip cuts and crosscuts up to 24" Wide
• Cut multiple pieces to the same size With just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw

User questions & answers

Question:	Will this work with a ryobi 5-1/2” p
Answer:	Yes!! We can do this for you, sure thing!! BUT- you must order it this special way where it says it's being FULFILLED BY EFYTAL JEWELRY and NOT 'fulfilled by Amazon'. To order: If you purchase this item as is, it will come from the Amazon warehouse and we won't be able to make you a custom item. In order for it to come out of our studio where we can make you this custom necklace, please follow these directions: 1) click on the listing 2) scroll over to the right and down where it says: 'Other Sellers on Amazon' (below the add to cart area) 3) click on the link that says '2 new' 4) select the 2nd one, the one that says it's being fulfilled by Efy Tal Jewelry's studio...even though it looks like it'll take longer to get there- THIS IS THE CORRECT AND ONLY OPTION FOR THIS TO WORK. 5) in the gift message field please type: " please make 22" in total length " (or whatever length you desire). You are welcome to email me the order # after you place the order through Amazon Buyer Seller Messaging. We won't charge you extra for this change :)! If you place your order today, it will ship tomorrow/on the next business day. Thank you so much!
Question:	Does this only work on full-size saws or will it work with compact saws like https://www.amazon.com/gp/product/b072vltg4s
Answer:	Hi there! Thanks for checking out my jewelry. Yes the entire necklace is made up of sterling silver. THanks for your question. Efy
Question:	Will this work with an old 7.25" porter cable frame saw model 743? i just want to make sure. i love my old saw, i'll keep it forever
Answer:	Hi there Thank you for your question. This necklace is made on an 18" chain and with the component it will measure 19". Although we can customize this necklace to measure a total of 16.5 or we can add a jump ring to the chain so that you can make it smaller and measure 16.5. Here is how to place a custom order through one of our studios. In order for it to come out of our studio where we can make you a custom chain or add a jump ring, please follow these directions: 1) click on the listing: https://www.amazon.com/dp/B0756LSQMG 2) scroll over to the right where it says: 'Other Sellers on Amazon' (below the add to cart area) 3) click on the link that says '2 new' 4) select the 2nd one, the one that says it's being fulfilled by Efy Tal Jewelry's studio. 5) in the gift message field please type: "please make this 16.5 or add a jump ring at 16.5 ".....please let us know one or the other (if by any chance you miss the gift message part, no worries, just send us another email. Please be sure to send us another email either way after you place your order requesting this) We won't charge you extra for the change! If you place your order today, it will ship tomorrow/on the next business day. I hope that helps! Thank you so much! <3 Efy Efy Tal Jewelry
Question:	Will the kreg KMA2685 guide fit for a dewalt circular saw
Answer:	HI, it's one necklace with 3 rings :)

Product features

Rip-Cut

Universal Sled is compatible with the Kreg Accu-Cut

The Kreg Accu-Cut is great for making straight, accurate, splinter-free cuts in plywood and other sheet goods. The saw sled accepts almost any circular saw, which allows you to turn your ordinary saw into a precision cutting tool.

One great feature of the Accu-Cut sled is that you can remove it from the Accu-Cut track, and install it on any Kreg Rip-Cut. The sled slides right onto the Rip-Cut Guide Arm and locks in place. That allows you to make long cuts, such as ripping a sheet of plywood lengthwise, with the edge-guided accuracy of the Rip-Cut.

Best of all, switching from the Accu-Cut to the Rip-Cut doesn’t require any changes to the setup on your Accu-Cut sled. No moving the saw or adjusting anything. So, when you’re ready to switch from edge-guided cutting back to track-guided cutting, all you have to do is slide the sled off the Rip-Cut, and set it back in place on the Accu-Cut track.

Product description

Our patented Swing Stop easily sets the distance between the end of the board and the saw blade for amazing cutting accuracy and repeatability. The curved design of the Swing Stop allows a board to bypass the stop automatically by simply sliding the board into the stop’s face. The Swing Stop features an adjustable lens cursor much lick that found on a high-quality table saw rip fence that can be “zeroed out” to assure pinpoint accuracy.

• - Quickly and accurately sets the distance between the end of the board and the saw blade
• - Allows for amazing accuracy and repeatability when cutting boards to length
• - Uniquely designed curved face allows stop to swing out of the way when not in use

User questions & answers

Question:	Does this fit a Dewalt 715 miter saw
Answer:	Hello, The tape is 1/2" wide. Thank You, Billy H Kreg Tech Support.
Question:	Is the cursor adjustable like on a table saw fence
Answer:	Hello, It is 12 continuous feet. Thanks!
Question:	Does this stop work with the extrusion used for the Band Saw Fence
Answer:	It is 1/16" all the way through.
Question:	will this fit an Incra miter gauge
Answer:	It's just a self adhesive tape measure that is 1/2" wide. So if the track you're using is at least 1/2" wide it should work fine.

Product features

Kreg Standard Swing Stop

• Add repeatable accuracy to your miter saw, band saw, table saw fence, router table, and more with this versatile Swing Stop. It holds your desired measurement precisely, and swings out of the way easily when you want to cut without it.
• The Swing Stop features a precision lens cursor with a hairline indicator that allows you to set dimensions exactly. Plus, the cursor is adjustable so you can easily fine tune the Swing Stop to your tool.
• When you want to use the Swing Stop, it stays where you set it thanks to its rugged aluminum construction and high-quality bushings that prevent deflection. When you want the Stop out of the way, simply swing it up or slide your board into the front of the curved foot, and the Swing Stop will pop up out of the way for an unobstructed cut. The foot also has a small breakaway section that allows you to modify it easily to work on a fence that has an auxiliary face.

Product description

The Kreg 1/2-Inch Self-Adhesive Measuring Tape fits snugly into the indentation on the topside of the Kreg Top Trak and Heavy Duty Trak aluminum extrusions, but with its self-adhesive backing, the tape can be used virtually anywhere. The metallic tape is highly scuff resistant, can be trimmed to length with household scissors, and reads right-to-left.

From the Manufacturer

This 1/2" wide, self-adhesive measuring tape fits snugly into the indentation on the topside of our Top Trak and Heavy Duty Trak. Metallic tape is highly scuff resistant and can be trimmed to length with a scissors. Be sure to choose the correct tape orientation...left-to-right reading to the right of the saw blade, right-to-left reading to the left of the saw blade.

• Accurate and durable self-adhesive measuring tape
• Interfaces perfectly with the Kreg Top Trak and Heavy-Duty Trak
• Trim to length with household scissors
• Scuff resistant
• Manufacturer's limited 30-day warranty
• Right-to-left reading

User questions & answers

Question:	How hard is it to remove the tape and adhesive residue
Answer:	I never tried 20 files, only tried up to 6 files, but I think this is correct, 30 points per file total 600 points
Question:	Why is this cheaper on the sp website
Answer:	No, it doesn't do multiplication or square foot calculations. This Bosch's most basic laser measure in the GLM series. You can spend more for more full-featured units. Amazon carries them.
Question:	Is this tape right to left reading for the left side of the blade
Answer:	Thank you for your question. To change the unit of measure on the GLM 15, turn off the unit and while unit is off press and hold the button, on the display you will see "unit" and it will be alternating from m to ft/in. Once you get to the unit of measure that you want, let go of the button. It will stay how you have it selected, until you change it. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Question:	How long is it
Answer:	Yes, the measurement starts starts from the rear of the unit. Just place it flush against one side of the frame and you are good to go.

Product features

Kreg 1/2-Inch Self-Adhesive Measuring Tape

• 1/2" (13mm) wide, self-adhesive tape
• Right-to-left reading
• Highly scuff-resistant metallic
• Easily trimmed with scissors
• Compatible with Kreg Top Trak & HD Trak