8 best laser receivers

• ⚠【HUEPAR DEDICATED RECEIVER】- Huepar LR-5RG receiver can ONLY be used with Huepar Line Laser Levels that have Pulse Mode Function‼ Please note the the receiver can NOT be used with Rotary Laser Level‼ And the receiver can NOT be used with Huepr 9011G&9211G laser level‼ It is recommended to use the detector in accompany with Huepar 901CG/902CG, BOX-1G/R, 8211G, 621CG/R, 622CG/R, 602CG/R, 603CG/R, GF360G/R, etc. Can also be used with Tacklife SC-L03 / SC-L04 Laser Level.
• ⚠【AVAILABLE FOR RED AND GREEN PULSE LASER】- It is NECESSARY to Turn ON the Pulse Mode of the Laser Level when using with Huepar LR-5RG laser receiver‼ The receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200 feet.
• ⭐【Large Reception Window & Dual LCD Display】- Large reception window of 2 inches and optical and acoustic signals help to locate the laser plane quickly and accurately. Dual LCD displays for easy visual readout on both sides of the receiver. LCD backlight provides a clear look even in low light conditions. Adjust the height until the horizontal datum line and the arrow disappear on the LCD display.
• ⭐【PRECISE OPTICAL AND ACOUSTIC SIGNALS】- This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
• ⭐【LONG BATTERY LIFE AND CLAMP HOLDER】- The receiver comes with 2 x AA battery, providing you with about 20 working hours. There is also an automatic shut-off feature that power down the device after about 10 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.

User questions & answers

Question:	Does this work with heupar 621cg. the list of compatible lasers all have an r behind them but none of the laser models have an r. im confused
Answer:	Thank you for your question. Yes, this laser receiver CAN be use with the 621CG. The R in the list represents the red beam laser level. For example, BOX-1G / R means BOX-1G and BOX-1R. These are two models of products.
Question:	Can this be used with the Huepar 603CR
Answer:	Thank you for your question. Yes, this receiver CAN be used with the Huepar 603CR. When use with a receiver, it’s necessary to turn on the pulse mode of the 603CR laser level.
Question:	Does this work with sc-L07 laser level
Answer:	It looks like it has the sc-L07 has a pulse mode that the Hueper LR-6RG Lazer Receiver excepts.
Question:	what is the difference between the lr-6rg and lr-5rg
Answer:	Thank you for your question. Their scope of application is the same, but the appearance and function are different. Function: LR-5RG: mute, precision adjustment and lighting adjustment; LR-6RG: mute function Appearance: LR-5RG: Dual LCD Displays ; LR-6RG: Three-Sided LED Displays and Dual-sided Bubble

Product features

Using Tips

● Put the laser level in Pulse (Outdoor) Mode!!!!!!!!!!!

● Made sure your laser level could used in accompanied with Huepar Receiver!!!!!!!!!!!

● Made sure the laser level and the Receiver windows were clean.

● Recheck the batteries in both devices (Laser level & Huepar Laser Receiver).

● Recommended for using with Huepar 902CG, 901CG, 8211G, BOX-1G/R, GF360G/R, 622CG/R, 621CG/R, 603CG/R, 602CG/R, B03CG, B02CG, B21CG, 503CG, 503DG Laser Level.

● Can NOT be used with Huepar 9011G & 9211G laser level!!!!!!!!!

LCD Icons

Move the Detector as the Direction Shown:

● Datum Lower than Laser Beam – Move Up

● Datum Higher than Laser Beam – Move Down

● When Datum in Line with Laser Beam – The Direction becomes a Line

Buzzer Remind

A beeping tone signals that the laser beam has been detected:

● A slower beeping tone signals – Move Up

● A fast beeping tone signals – Move Down

Can toggle through the volume, or turn on Mute.

Humanized Function

It boasts a dual-sided LCD display, backlight and battery status. Can toggle through the volume and accuracy. While the accuracy mode allows you to switch between HIGH and LOW.

Built-in Bubble and Holder

LR-5RG Laser Detector comes complete with a compatible rod mounting bracket.

A built-in bubble level provides an extra measure of leveling accuracy.

High Quality

Robust and built tough to last, the detector is durably constructed with a hard plastic housing and rubber casing for long-term use, as well as protection against wet weather conditions when working outdoors.

• DUAL-SIDED LCD DISPLAY. The AdirPro LD-8 is outfitted with a dual-sided LCD display for easy visual readout on both sides of the receiver. Boasting a working range of 100 feet, it displays clear and accurate readouts of the elevation, grade sensitivity, and audio and battery status.
• EASY TO USE. Featuring a user-friendly interface, this unit is smart in its simple design. Both the volume and backlight can be adjusted with the simple touch of a button, while a magnetic strip allows you to affix the receiver onto any metal surface.
• DURABLE CONSTRUCTION. The Rotary Laser Receiver Detector is expertly crafted with a hard plastic housing and rubber casing to provide long-lasting strength and use. These weather-resistant IP55 rated materials are designed to hold up against the elements, keeping the unit protected when working outdoors in wet conditions.
• COMPATIBLE ROD MOUNTING BRACKET. You can easily secure the receiver to the clamp using the included ¼-inch thread screw, then clamp the receiver to a grade rod or wooden pole. The bolt adjustment system easily adjusts with a simple screwing motion to secure the clamp to the rod or pole.
• LONG BATTERY LIFE. The AdirPro comes complete with two AA batteries, providing you with approximately 40 working hours. After approximately 10 minutes of being idle, the automatic shut-off feature will power down the device to extend battery life. **Prop 65 Warning - Lead and DEHP**

User questions & answers

Question:	I have a Dewalt 18 volt rotary laser. Is this receiver compatible with it
Answer:	Designed for measurement of moisture content from the surface down to .25” (6.4mm) or .75” (19mm) deep inside wood "The above measurements are conservative. Example, I can place my hand on the opposite side of a 2x4 when taking a reading on the other side and affect the meter reading." FROM THE USER'S MANUAL 1. If the thickness of the piece of wood or other building material is greater than .75 inch (19mm), and you wish to get more of a full thickness rather than a shallow measurement, it is a good idea to take measurements in 3/4” mode on both sides and average the readings. "However, refer to my comment above regarding the 2x4. We have many companies and individuals that use Orions (and our previous MMC models) to measure 1.5 inch thick to 2.0 inch thick material, and are only measuring from one side (face).” 2. To prevent high or inaccurate readings, always have a minimum 1-inch (25mm) air gap underneath the piece of wood you are measuring. During this process make sure your hand is not directly underneath the wood you are measuring. Ron Smith - Wagner Meters Sales Manager
Question:	Would it work with pulsing line lasers
Answer:	First, regardless of the meter utilized, in general a meter’s accuracy is somewhat affected by the type and amount of treatment in the wood. Next, the Orion model 930 is well-suited for measuring wood with thicknesses up to 2”. IF there is very little moisture gradient in the thicker pine (3” and above) the depth of readings with the 930 will also represent the overall moisture content of the thicker pieces. To best answer these type of technical questions, we highly recommend you call Wagner Meters so their experts can help with your individual situation. Ron Smith - Wagner Meters
Question:	Does this receiver go with a Bosch laser
Answer:	For measuring the moisture in wood that has fairly smooth, flat surfaces at least 2.5 inches by 2.5 inches, one of Wagner’s non-pin Orion-model moisture meters would be fine. If you have rough, rounded surfaces, you may need to use a pin-type moisture meter with longer pins with insulated shafts on a slide hammer cabled to the actual meter.
Question:	will this work with 3d series laser level
Answer:	Although the Wagner Meters commitment to customer satisfaction dates back to its inception (the 1960s), the dawn of 2012 brought in a new era. Wagner Meters now offers a standard seven-year warranty policy on all Orion meters as well as the MMC and MMI moisture meters. Effective since January 1, 2012, Wagner Meters has implemented extended warranty protection on these models to ensure that woodworkers, manufacturers, installers, and inspectors can measure and monitor their wood products moisture content (MC) with renewed confidence.

Product features

Quick Location of Laser Signals.

Even when the beam is invisible to the eye, you can quickly and accurately locate laser signals with the AdirPro LD-8 Universal Rotary Laser Receiver Detector. The device is compatible with all red rotary lasers in any lighting condition, allowing for use both indoors or out. It’s ideal for any job that requires precision leveling, including installing ceiling tiles, aligning shelves, installing receptacles for power in a home, trenching, laying pipe, setting concrete forms and leveling driveways.

Simple to Use.

Laser receivers can shorten the amount of time needed to find the beam and get on level. Easy to use, the AdirPro features a magnetic strip that allows you to affix the receiver onto any metal surface. Furthermore, the interface is user-friendly and smart in its simple design – both the volume and backlight to the liquid crystal display can be adjusted with the simple touch of a button. In addition to the on/off button, there is an automatic shut-off feature that will power down the device after approximately 10 minutes of being idle to extend the life of the batteries.

High-Quality Construction for Long-Term Durability.

Robust and built tough to last, the detector is durably constructed with a hard plastic housing and rubber casing for long-term use, as well as protection against wet weather conditions when working outdoors. For added convenience, it boasts a dual-sided LCD display showing clear, accurate readouts of the elevation, grade sensitivity, and audio and battery status. A built-in bubble level provides an extra measure of leveling accuracy, while the accuracy mode allows you to switch between ultra fine and very coarse.

Easy Adjustment With Included Mounting Bracket.

The LD-8 Laser Detector comes complete with two AA batteries (for approximately 40 working hours of continuous use), as well as a compatible rod mounting bracket. Secure the receiver to the clamp using the ¼-inch thread mounting nut and then clamp the receiver to a grade rod or wooden pole. The non-expanding, bolt adjustment system easily adjusts with a screwing motion, while the ridged edges give extra friction to secure the clamp to the rod.

Product description

The Topcon RL-H5A Horizontal Self-Leveling Rotary Laser is a multi-purpose laser that is ideal for grading, excavating, site preparation, concrete works, and other general construction projects. With a laser receiver, it offers a long operating range that covers up to 2,600 feet in diameter. This laser level also offers an accuracy of up to ±1/16" or 1/8" at 100 feet and is self-leveling within ±5 degrees. For added precision and accuracy, the RL-H5A features a manual single-axis leveling method, which allows you to match existing single slopes, and rotates 600 times per minute while the self-leveling of the cross-axis provides out of level protection for the opposite axis. The RL-H5A transmitter sends a continuous self-leveled 360-degree laser reference over your entire work area, allowing you to work longer from each setup with greater accuracy. This horizontal rotating laser is simple to use, intuitive and re-levels itself immediately if the device is disturbed on the job. Just turn it on and in seconds you’re working. With an IP66 rating, the Topcon RL-H5 series is protected from dust and low-pressure water jets. RL-H5A laser levels are covered by Topcon's 5 year guarantee against defects in parts and/or workmanship for a period of 5 years. This rotary laser uses either a dry cell or a rechargeable battery that can power the device up to 100 hours, making it the great companion for a long day at work. Weighing only 5.07 pounds, this laser level measures 6.77" L x 8.31" W x 8.07" H. Laser Class-II; Laser Type-635nm, <1mW

• Range up to 2,600 feet with receiver
• Accuracy of ±1/16" or 1/8" at 100 feet
• Optional manual single-axis leveling method
• Laser Class-II; Laser Type-635nm, <1mW

User questions & answers

Question:	Do you have a quality grade rod you recommend
Answer:	Yes Johnson offers a life time warranty,just contact them and they will take care of you.
Question:	Does it come with aluminum grade rod
Answer:	Its stated range is 1/8" at 100ft on the box. The laser is the 40-6515 on Johnson's website.
Question:	Should I have been batteries with this package
Answer:	If this Laser Level part is the 40-6517, as question 1 suggested, then the range should be 800 feet according to the Mfg. site: http://www.johnsonlevel.com/P/1512/40-6517
Question:	Does this come with the LS-100D
Answer:	The level itself is the same. The tripod is better quality with the 99-006k but doesn't come with a case for the entire kit.

• ✔️HUEPAR DEDICATED RECEIVER- Huepar LR-6RG receiver can ONLY be used with Huepar Line Laser Levels that feature Pulse Mode Function. Please pay attention to that this receiver can NOT be used with Rotary Laser Level. And the receiver can NOT be used with Huepr 9011G&9211G laser level. It is recommended to use in accompany with Huepar 902CG/901CG/8211G/BOX-1G/BOX-1R/GF360G/GF360R/622CG/622CR/621CG/621CR/603CG/603CR/602CG/602CR/DT03 Laser Level.
• ✔️AVAILABLE FOR RED AND GREEN PULSE LASER- It is necessary to Turn ON the Pulse Mode of the laser level when using with Huepar LR-6RG laser receiver. This receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200ft (60m).
• ✔️CLEAR MULTI-SIDED READOUTS- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.
• ✔️PRECISE OPTICAL AND ACOUSTIC SIGNALS- This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
• ✔️LONG BATTERY LIFE AND CLAMP HOLDER- The receiver comes with a 9V dry battery, providing you with about 70 working hours. There is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.

User questions & answers

Question:	El receptor es compatible con el laser huepar 603cg-bt
Answer:	Yes, the DW0892G is compatible with the DW0822LG.
Question:	What is that vertical bubble level on the side for
Answer:	No, this is not compatible with DW073
Question:	Difference between lr-6rg and lr-5rg
Answer:	No, the DW0892G is not self leveling. The DW0892G is a laser line detector. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	My unit does not make any sounds. I push the volume button but nothing happens.. any insight
Answer:	From what I’ve read it works with all green laser. It’s the same wave length .

Product features

Using Tips

• !!! It is Necessary to turn ON the Pulse Mode of the Laser Level when using with the Receiver !!!!!!
• !!! Can NOT be used with Huepar 9011G/9211G/FL360R/FL360G/8300G laser level !!!
• !!! Recommended to Use the receiver with Huepar GF360G/GF360R/621CG/621CR/622CG/622CR/603CG/603CR/602CG/602CR/503CG/503DG/902CG/901CG/8211G/BOX-1G/BOX-1R/B03CG/B02CG/B21CG/DT03CG Laser Level !!!
• Make sure the laser level and the Receiver windows were clean.
• Recheck the batteries in both devices (Laser level & Huepar Laser Receiver).
• Make sure your laser level can be used in accompany with Huepar Receiver.

Precise Optical Signals

Move the Detector as the Direction Shown:

• Datum Lower than Laser Beam – Move Up
• Datum Higher than Laser Beam – Move Down
• When Datum in Line with Laser Beam – The LED Indicator Light is Displayed in Green

Buzzer Remind

A beeping tone signals that the laser beam has been detected:

• A slower beeping tone signals – Move Up
• A fast beeping tone signals – Move Down

Clear multi-sided readouts

Three-Sided LED Displays, provide clear LED signal prompts on three sides

• LED displays on the front
• LED displays on the side
• LED displays on the back

Built-in Bubble and Holder

LR-6RG Laser Detector comes complete with a compatible rod mounting bracket. The built-in bubble level provides an extra measure of leveling accuracy.

• 【Firecore Dedicated Receiver】: Firecore FD20 receiver can ONLY compatible with Firecore 94T-XG laser level that feature Pulse Mode Function. Please pay attention to that this receiver can NOT be used with Rotary Laser Level.
• 【Compatible with Green Pulse Laser】: Make sure Turn ON the Pulse Mode of the laser level, to detect green pulse laser beams in difficult light conditions, distances up to 165ft/50m.
• 【Three Sides Readouts】: The receiver can display the received line on the front, side and back to offers easier visual readout. The item also outfitted with a dual-sided bubble vial on both the front and top, which can be more accurately determine the level.
• 【Precise Optical Signals and Adjustable Beeper】: Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
• 【Long Battery Life and Compatible Rod Mounting Bracket】: Comes with a 9V dry battery, providing you with approximately 60 working hours. After approximately 5 minutes of being idle, the automatic shut-off feature will power down the device to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a grade rod or wooden pole.

User questions & answers

Question:	Will this work with red line laser
Answer:	Yes. I drive these with Class D ncore amps. Very clean and accurate with high quality upstream components.
Question:	Does the mount come with it
Answer:	Mine were.
Question:	Does this item mount on a rod on a dozer or exacator
Answer:	It won't solve the whining. Go to the Crutchfield site and they have troubleshooting info there that can help you find the problem.
Question:	Does it have bluetooth capability like the ls-b110w
Answer:	It worked well on my 02 Escalade
Question:	Does this item actually come with teh wireless display as indicated by item name "Topcon 312670101 LS-B100 Laser Receiver and Wireless Remote Display
Answer:	It should but buy the one for a factory amp and not the Bose model.

Product features

Firecore Laser Detectors

When operating lasers outdoors on large jobsites, you typically can't see the beam. Laser detectors become a mandatory accessory to detect beam height and ensure the accuracy of your work.

Please be aware that this item is compatible with pulse induction laser levels only.

If you are not sure whether it suits for your laser tool, please confirm with us before you place an order.

Package Includes:

1*Firecore FD20 Red Green Line Laser Detector

1*Heavy-duty clamp

1*9V Dry Battery

Firecore FD20 Laser Detector Specifications:

Pulse duration: 50 μs ; PWM: 5:5

PRF Pulse Repetition Frequency : 10KHz (Matched PWM and frequency, Line lasers can work with F93TR/G Laser Receiver)

Display: Three-sided LED indicator display

Leveling Accuracy: ±1/17 In.

Working Distance: 7ft - 165ft

Auto Power Off (with No Signal Detected): 5 min

Operating Temperature Range: 32℉ - 104℉

Dimension (LxWxH): 5.5 x 2.5 x 1.5 inches

Weight: 174g with battery

Firecore Laser Detectors

-LED Display: Three LED's light up to alert on grade / too high / too low.

-Audible Alert: The detector will beep when a laser signal is found but is too high or too low. The LED's will indicate which direction to move the detector to find grade. A solid tone will indicate when the detector is on grade.

-Low Battery Indicator: The detector will perform a battery check at startup and alert you to a low battery or exhausted battery.

-The accuracy of this detector is not adjustable, and is:

= 0.06" for distances < 165'.

= 0.10" for distances > 165

Product description

RL-H5A is the Next Generation Self-Leveling Construction Laser; With great distance and high-accuracy; Long-range operation (800 m); Smart long-range receiver; Simple, intuitive manual slope capability; ±10 Arc second horizontal accuracy; Laser product 2.4mW and class IIIa. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• MULTI-PURPOSE LASER: Grading, excavating and general construction projects are perfect applications for the RL-H5A. With the IP66 rating, the RL-H5A is "job site tough" and can withstand dust, a sudden shower and even torrential rainfall.
• EASY TO USE: With electronic self-leveling, you press the power button and go right to work in seconds. If the RL-H5A gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 arc seconds.
• LONG RANGE WITH HIGH ACCURACY: Need to shoot elevations up to 800 m from your laser? No problem - this instrument has the power and range to cover a 800 m diameter job site.
• KIT COMPONENTS: includes the RL-H5A laser or LS-80L , Sensor holder and Carry case.

User questions & answers

Question:	Red or green lazer
Answer:	I believe the range is around 500'. I've used it up to 300-350' with no problem.
Question:	Does it come with a Hard Case in Photo or a soft case
Answer:	Mine came with the rod, which the laser sensor slides on. This reconditioned unit is a phenomenal buy. Only thing missing from the one I got was the red plastic lens which is supposed to help you see the laser. Hope this helps.
Question:	Whats the accuracy @ 100 feet? Someone said .005. @ 300 feet. Thats 5/1000 of an inch at 300 feet and I know thats not correct
Answer:	Mine did.
Question:	Does this unit come with a tripod
Answer:	Yes, it comes with tripod and measuring stick.

Product description

The Bosch LR1 laser receiver increases rotary laser detection to up to 650-feet with ease and accuracy. The dual-sided LCD display offers easy viewing on both sides of the receiver while the built-in magnets securely attaches to metal surfaces for use at greater distances. A LCD arrow display and selectable audio signal give clear on-grade position to ensure accuracy of +/-1 mm fine (+/-3 mm coarse).

• ACCURACY: The Bosch LR1 Red Beam Rotary Laser Receiver increases rotary laser detection up to 650 feet within an accuracy of +/-1 mm / +/- 3 mm.
• EASY-TO-USE: With a dual-sided LCD display, the LR1 allows for easy visual readouts on both sides of the laser receiver.
• ATTACHABLE: The Bosch LR1 includes built-in heavy duty magnets for secure attachment to metal surfaces and convenient rotary laser detection at greater distances.
• CLEAR READOUTS: The LCD arrow display and selectable audio signal give clear high/low on-grade position indication.
• COMPATIBLE: The Bosch LR1 Red Beam Rotary Laser Receiver works with Bosch and most red-beam rotary lasers

User questions & answers

Question:	will this work with GLL
Answer:	Hi Laurie, these speakers are sold as pairs. Feel free to place an order at your convenience, we'll ship ASAP.
Question:	Will this read the gl
Answer:	These speakers are not legit focal speakers. Mine did not work
Question:	is it compatible with the Bosch GLL
Answer:	I GOT 4 OHMS WHEN YOU SAID THERE 2OHMS
Question:	This item works with dw079 dewalt
Answer:	Yes all K2 series speakers are made in France
Question:	Do you have to still have a rotery grade laser with this to operate
Answer:	Hi , 2 years
Question:	Can this be mounted on a dozer blade
Answer:	it's for a pair sir...would recommend the upgraded model focal rcx-690psi instead.
Question:	Can you you set a 2% slope and it read that or is it just a level grade indicator
Answer:	I would say that they are neutral. The sound is very detailed and clear.
Question:	Will this work with Topcon lasers
Answer:	This is the price for the pair. They are excellent bookshelf speakers.

Product description

Highly versatile laser receiver for basic and advanced leveling and aligning applications



The Spectra Precision HL700 Laserometer, a highly versatile laser receiver for basic and advanced leveling and aligning applications, is designed for general, concrete and site preparation contractors. The HL700 Laser Receiver is an easy-to-use tool that accurately measures elevations across the site, and is ideal for use with any rotating transmitter.







The HL700 Laser Receiver features a digital readout of elevation that provides a numeric display of +/- 5 cm (+/- 2 inches). The readout is displayed on the large front and rear LCD's and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application - mm, cm, ft, in or fractional inches.







A 12.7 cm (5 inch) reception height, more than double the industry standard, allows quick acquisition of the laser beam. An anti-strobe sensor prevents false readings from site strobe lights.







The Laserometer is designed to survive the tough construction site conditions; it is totally waterproof and can withstand a drop of 3 meters (10 feet) onto concrete. The HL700 offers a 3-year "No Excuses" warranty.







The HL700 can be used as either a hand-held or rod mounted receiver for a wide range of applications.

From the Manufacturer

The new Spectra Precision Laser HL700 Laserometer features digital readout of elevation. Large sensing range and anti-strobe sensor, the Spectra Precision Laser HL700 Laserometer features a digital readout of elevation that provides a numeric display of ± 2 inches (±5 cm). The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. The HL700 has a 5 inch (12.7 cm) reception height, more than double the industry standard, which allows quick acquisition of the laser beam. Also included is a patented anti-strobe sensor that prevents construction lights from giving faulty signals and makes it easier to identify the laser beam signals. The Laserometer is designed to survive the tough construction site conditions. It is totally waterproof and can withstand a drop of 10 feet (3 meters) onto concrete. Highly visible LED’s on the front show red for high and low and green for on-grade. The HL700 can be used as either a hand-held or rod mounted receiver for a wide range of applications.

• package height : 9.144 cm
• package length : 20.32 cm
• package width : 11.938 cm
• Product type : TOOLS

User questions & answers

Question:	does this work with a crossline laser or does ot have to be rotary
Answer:	You have to see if it’s compatible with your vehicle.
Question:	Does anyone know the approximate horizontal angle of reception
Answer:	No it won't. 2001 harness is on right side of steering column 4 wires red white black and blue. Reese makes a 4 wire connector you splice to the wires. Also need a 30 amp breaker under hood in fuse box. You tube has video on how to do it. 15 min install.
Question:	is this compatable with all rotory laser levels
Answer:	seems to work on all GMC vehicles
Question:	does the laser receive readings from both sides
Answer:	Hi, wattage wise they're okay, but they're low in sensitivity so the volume would be quite a bit lower than your factory speakers. I'd recommend an amp with these. You'll probably be best finding higher sensitivity speakers (around 92db +/- 2db) to use with your factory system and no amp. Regards, Don