12 best tap light for car

Product description

Shed light on any dimly lit area in your home with the GE touch activated LED puck lights. The 2 pack of lights are perfect for closets, pantries and under cabinet fixtures! these lights are easy to control with the touch on/touch off feature. The bright White LED light emits 20 lumens and is cool to the touch and there are no bulbs to replace. There are two mounting options: keyhole mount (hardware included) or double-sided tape (included). these lights are for indoor use only - not for use in wet or damp locations. The lights require 3 AAA batteries each, which are not included, battery installation instructions are included on the packaging. This product comes with a 1-year limited .

• Add light anywhere you need it. Ideal for under cabinets, closet, pantry, laundry, work area, garage, workbench, bookshelf, and much more
• 2 pack, 20 lumens and touch-activated puck lighting, easily turn on and off with a touch
• Long-life, cool to the touch, and energy-efficient LED means no bulbs to replace
• Battery operated, no wiring needed. Each puck light requires 3 AAA batteries (not included)
• Fully assembled and ready to install. Installation hardware and instructions included for easy installation. This product comes with a 1-year limited

User questions & answers

Question:	Would this be able to stick and stay on the roof inside my car
Answer:	I would say yes, but i wouldn’t recommend just because although the piece is very sticky, i dont know how long it would stay on since the roof of a car is more cloth like
Question:	What size of battery do you use
Answer:	Each puck light requires 3 AAA batteries (not included)
Question:	How large are these lights
Answer:	Hello Amazon Customer, thank you for your question. Our GE LED Puck Lights are approximately 3” in diameter. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Are these motion sensor or touch activated
Answer:	They are touch activated.

Product description

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire. Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc. Installing Method: 1. Disconnect Power Source. 2. Select and remove a fuse in your vehicles fuse box which with constant or switchable power capabilities that matches the power requirements of the accessory you are adding. 3. Insert new accessory fuse into added slot. 4. Install Add-a-Circuit with the newly added fuse installed , back into the fuse block. Reconnect power source, Turn on Ignition to test new accessory for proper operation. Note: Please check your car fuse box before order, what kind of fuses fit your vehicle: Standard, Mini or Low Profile Mini. This fuse adapter is for Low Profile Mini use. Please attention that if you find that the fuse is difficult to insert or remove, please use tool to gently tap in or pull out. Package Contents: 10 x Low Profile Mini Add-a-circuit Fuse Adapter10 x 5Amp Low Profile Mini Blade Fuse

• Dual-slot Fuse Holder: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
• Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connect to the fuse box.
• Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
• Wide Range of Uses: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
• Package Include: 10pcs low profile Mini add-a-circuit fuse tap adapter + 10pcs 5Amp low profile Mini blade fuse for your convenience.
• Fit type: Universal Fit

User questions & answers

Question:	Do you need a crimp tool for these? If so, any recommendations here on Amazon? Thx
Answer:	You can strip the end of The wire insert it into the blue crimp point and crimp it. As for crimp tools really any would do fine just make sure it matches the gauge wire that you're using typically blue would be blue yellow to yellow, red to red etc on the crimper. Another way you can do it, is you can use t-taps, and crimp that to the wire itself with some pliers and then plug the other end into the t-tap itself,
Question:	Hi does this work for 2017 tacoma
Answer:	It will work as long as your Tacoma has mini fuse.
Question:	What type wire? copper, aluminum? Thank you
Answer:	I think aluminum,I am not sure, but very good quality.
Question:	Can you “piggy back” these on top of eachother
Answer:	In theory you could, but you would need to make sure the amps would not exceed the first one. The only way i would be comfortable doing It would be low amp led lights maybe. You could also just join the wires together and then crimp them as one wire.

Product features

Nilight Low Profile Mini Add-A-Circuit Fuse Adapter

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire.

Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.

Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc.

Circuit Protection

This dual-slot add-a-circuit fuse holder provides a fuse slot for the existing circuit and a second slot with a 5 Amp blade fuse for a new circuit.

Superior Quality

Made of high quality nylon plastic, anti-wear and anti-corrosion, very sturdy and durable; thermoplastic-insulated wire is high temperature and melting resistant.

Premium Wire

Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity

Car Electronic Device

Adding a new circuit for dashboard camera, radar detector, GPS, car recorder, car alarm, radio, DVD player and other electronic devices.

Fits for Most Vehicles

This add-a-circuit blade fuse holder can be widely used for most kinds of vehicles, such as motorcycle, cars, trucks, Jeeps, SUVs, boats and RVs.

Use on Boat

Can be used for adding LED strip, DVD player, radio and other electronic without cutting or splicing.

Other Device

Suitable for radar detector, GPS, DVD player, radio and other electronic that requires.

Product description

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire. Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc. Installing Method: 1. Disconnect Power Source. 2. Select and remove a fuse in your vehicles fuse box which with constant or switchable power capabilities that matches the power requirements of the accessory you are adding. 3. Insert new accessory fuse into added slot. 4. Install Add-a-Circuit with the newly added fuse installed , back into the fuse block. Reconnect power source, Turn on Ignition to test new accessory for proper operation. Note: Please check your car fuse box before order, what kind of fuses fit your vehicle: Standard, Mini or Low Profile Mini. This fuse adapter is for standard use. Please attention that if you find that the fuse is difficult to insert or remove, please use tool to gently tap in or pull out. Package Contents: 10 x Standard Add-a-circuit Fuse Adapter10 x 5Amp Standard Blade Fuse

• Dual-slot Fuse Holder: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
• Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box.
• Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
• Wide Range of Uses: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
• Package Include: 10pcs Standard add-a-circuit fuse tap adapter + 10pcs 5Amp Standard blade fuse for your convenience.
• Fit type: Universal Fit

User questions & answers

Question:	Necesito conectores hembras y macho para instalar juego de luces delanteras a camioneta
Answer:	Estos no son los conectores hembra y macho. Esto te ayuda a sacar un fusible y un cable para que puedas conectar un juego extra de luces o para cualquier otro accesorio extra. Muy bueno si no tienes de donde sacar corriente. Conectas este en donde tengas lis fusibles. Sacas un fusibles de tu vehículo conectas este y luego conectas el fusible que sacasteis
Question:	Would this work with 42 watts
Answer:	This adapter will let you add a circuit to an existing 12 volt circuit directly at the fuse box. This kit is for standard size fuse. You can get this kit in mini fuse and micro mini. You ask if it can work with 42 watts. The answer is simply yes. But, you must be sure the circuit you are going to add on to is the correct voltage, and can cary the heat that 42 watts will generate.
Question:	Do I crimp with normal pliers or do I need a special tool
Answer:	I would crimp with with electricians pliers. The type with the wire stripper and crimping capability. With regular pliers you may not get a solid crimp which could result in a connection that is either loose or one that could pull apart in time.
Question:	will this work on a 2017 toyota tundra
Answer:	Short answer... no... the fuse is different size, I'm not sure they make it for type of fuse.

Product features

Nilight Standard Add-A-Circuit Fuse Adapter

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire.

Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.

Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc.

Circuit Protection

This dual-slot add-a-circuit fuse holder provides a fuse slot for the existing circuit and a second slot with a 5 Amp blade fuse for a new circuit.

Superior Quality

Made of high quality nylon plastic, anti-wear and anti-corrosion, very sturdy and durable; thermoplastic-insulated wire is high temperature and melting resistant.

Premium Wire

Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity

Car Electronic Device

Adding a new circuit for dashboard camera, radar detector, GPS, car recorder, car alarm, radio, DVD player and other electronic devices.

Fits for Most Vehicles

This add-a-circuit blade fuse holder can be widely used for most kinds of vehicles, such as motorcycle, cars, trucks, Jeeps, SUVs, boats and RVs.

Use on Boat

Can be used for adding LED strip, DVD player, radio and other electronic without cutting or splicing.

Other Device

Suitable for radar detector, GPS, DVD player, radio and other electronic that requires.

Product description

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire. Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc. Installing Method: 1. Disconnect Power Source. 2. Select and remove a fuse in your vehicles fuse box which with constant or switchable power capabilities that matches the power requirements of the accessory you are adding. 3. Insert new accessory fuse into added slot. 4. Install Add-a-Circuit with the newly added fuse installed , back into the fuse block. Reconnect power source, Turn on Ignition to test new accessory for proper operation. Note: If you find that the fuse is difficult to insert or remove, please use tool to gently tap in or pull out. Package Contents: Add-a-circuit Fuse Adapter x 10pcs3 x low profile mini add-a-circuit fuse adapter 4 x mini add-a-circuit fuse adapter3 x standard add-a-circuit fuse adapter Blade Fuse x 10pcs3 x 5Amp low profile mini blade fuse 4 x 15Amp mini blade fuse 3 x 5Amp standard blade fuse

• Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise
• Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box.
• Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application
• Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing
• Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars; 4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars; 3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars
• Fit Type: Universal Fit

User questions & answers

Question:	can I use this with 15A fuse that comes with the package on an 7.5a fuse box and existing 7.5a fuse
Answer:	The fuse that is in the position closest to the fuse box is what the actual position in the fuse box runs off of the second position for the fuse is for your auxiliary that is piggybacking off that slot hopefully that interview question and yes you can use two different amperage fuses it doesn't matter
Question:	What's the max amps and is it fir both fuses combined
Answer:	The adapter will work with any amperage that is used in the fuse block. Both slots need a fuse in them to function. 3 standard fuses, 3 small, and 3 mini are included. Easy to use. Depending on the fuse block design, You may need to shave the adapter to fit properly, Otherwise, you shouldn't have an issue.
Question:	It seems like if you plugged this in one way, or flipped it around the other you would either get a +12v connection or a ground connection? True
Answer:	The Fuse Box would have two connections (socket ) one being 12 VDC / Power with the other side would the Load-Side. Take a DMM (DC) to find which side is Power or 12 VDC. Looking at the Adapter the side with the Red Wire Leads enter the adapter is is the Load Side. Insert the adapter accordingly. I hope this helps.
Question:	If the blue crimp goes to one side of a circuit where does the negative side go
Answer:	The negative cable grounds to the metal surface of the vehicle.

Product features

Nilight Add-A-Circuit Fuse Adapter

With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire.

Dual-slot Fuse Holder provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.

Wide Range of Uses, suitable for Car Alarms, GPS, Car Recorder, Cell Phone Charger, DVD Player, Satellite Radio, etc.

Circuit Protection

This dual-slot add-a-circuit fuse holder provides a fuse slot for the existing circuit and a second slot with a blade fuse for a new circuit.

Superior Quality

Made of high quality nylon plastic, anti-wear and anti-corrosion, very sturdy and durable; thermoplastic-insulated wire is high temperature and melting resistant.

Premium Wire

Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity

Car Electronic Device

Adding a new circuit for dashboard camera, radar detector, GPS, car recorder, car alarm, radio, DVD player and other electronic devices.

Fits for Most Vehicles

This add-a-circuit blade fuse holder can be widely used for most kinds of vehicles, such as motorcycle, cars, trucks, Jeeps, SUVs, boats and RVs.

Use on Boat

Can be used for adding LED strip, DVD player, radio and other electronic without cutting or splicing.

Other Device

Suitable for radar detector, GPS, DVD player, radio and other electronic that requires.

Why Choose Us

Dedicated to communicate with our customers, we provide the superior-quality products and best service for each customer.

Professional Manufacturer

All Nilight products are made of carefully-selected materials and pass through strict quality check to ensure each of you get superior quality at the best price.

Quick Reply

Staffs in our customer service team have rich experience in after-sales service. E-mails will be quickly responded within 24 hours.

Product description

The Energizer Tap Light will illuminate small spaces like cabinets, pantries and closets in your home. Place it in your basement, attic, garage or storage shed for a lighting option in those hard-to-get-to places. There is no wiring involved in the battery-operated light installation process so it can easily be placed almost anywhere. This versatile light ensures that you can see into most nooks, corners and crannies to protect against unexpected surprises like spiders or other insects hiding in the shadows. The indoor wall-mounted or portable light can be placed on your nightstand to serve as an emergency light source. Line your dark hallway with them to make your children feel safe and secure at night. Adults and children can use them thanks to the easy-to-use design. Place tap lights around your home to help light the way. By illuminating hallways and staircases, they add safety and security for your family and guests.

• Simple to use, press lens to turn the light on and off
• Compact, portable and lightweight,  this push activated puck light can be used under cabinet, drawer, closet,  pantry shelf, attic, bathroom, nightstand, hallway, garage, car trunk and more
• Wireless lighting with no wiring needed, convenient and dependable lighting for emergencies and power outages; Add light to your home without the need for an electrician
• Tap light is battery operated and requires 4 x AA batteries (Not Included)
• Easy to install, place on tabletop or wall mount using keyhole or double sided tape; For indoor use only, comes with 90 day limited

User questions & answers

Question:	How many does the pack come with
Answer:	Hello Valued Customer, thank you for the question. This could be described as a cooler or soft white color. We do not have a lumens listed for this timer since this is more of a utility light and is meant for smaller areas like closets or workbenches. If you have any further questions, please reach out to us by following the link below. Our support number is located on the top right corner of the web page. When you call, please press option 4 and provide our Consumer Care Team with your personal ticket number 514670, so that we can resolve your issue promptly. We look forward to helping you. https://www.amazon.com/sp?_encoding=UTF8&asin=&isAmazonFulfilled=&isCBA=&marketplaceID=ATVPDKIKX0DER&orderID=&seller=A23REY5RU8UL5T&tab=&vasStoreID
Question:	What is the dimensions
Answer:	Not sure about in the shower. I have my light in a closet.
Question:	How many lumens is this
Answer:	It could. There is a bar on the back that you use to slide the light off and on when you change the batteries. You could screw the bar to the ceiling using extra long screws. I have mine on a stairway and it does give out lots of light. Hope this helps.
Question:	what color light? warm/soft or bright/white (degrees kelvin
Answer:	All i can say is with an off brand battery (cheap) the brightness didn't last but it still works after 2 months. Also it didn't stay that bright as it says. It was good for about a week and then went quite dim.

Product features

Energizer LED Tap Light

Push Activated

Powered By 4 AA Batteries (Not Included)

Mounting Hardware Included

Product description

Avatar Controls car led strip lights has extra dreamcolor function, make a stronger visual impact and viewing experience. Also it has more control ways, app, control box and extra remote.

• AvatarControls APP& REMOTE CONTROL& CONTROL BOX: Upgraded 3 control ways, simply tap the control box and remote, Able to stick it on an easy-to-reach place for your safe driving. Also, when you free you can use car led lights interior with the APP
• SYNC WITH MUSIC: Ambient lighting built-in high-sensitive mic, Sync bias lighting to your favorite song and shows how neon changing with the rhythm. Car interior lights provide 16 million colors, 8 scenes, 4 music modes, make a stronger visual impact
• 【RGBIC Color Effect and Brightness】Upgraded dreamcolor design. Different from the traditional RGB color, our RGB-IC car interior lights can display multiple colors on a car floor light at the same time (over 16 million colors), enjoy rainbow-like light effects and more colors, and 72 LED lamp beads make it brighter.
• UPDATE TWO-LINE DESIGN: Unlike traditional 4 lines, this car lights interior boasts 2 lines with 5.9ft+2.78ft super long wires connecting 4 strip lights . Easier for you to set up and hide lines. Always keep your cool car clean, tidy
• EASY TO USE : Auto interior lights has a working voltage of 12V and powered by car charger, with short circuit protection function just plug it and enjoy your trip

User questions & answers

Question:	Can this led car lights sync with music
Answer:	Yes, this interior car lights built-in high sensitivity mic, the led lights will change their colors following the music rhythm.
Question:	Is this auto interior lights only rainbow color or does it still come with solid colors as well
Answer:	It has solid color and music sync function.
Question:	Where is the mic located
Answer:	The mic is in the control box.

Product features

Ours and Others

• Suitable for a variety of cars: Unlike traditional 4 lines, this car light boasts 2 lines with 5.9ft+2.78ft super long wires connecting 4 strip lights . Easier for you to set up and hide lines. Always keep your cool car clean, tidy.

• 3 button contollrt box-you can set the music mode, change the color with ot.
• Music- you can set the music that you like, the smart led strip light will change the color with rhythem.
• Extra remote- with 433 remote, you can put down the phone to enjoy the relaxing time.

Product description

The Energizer Tap Light will illuminate small spaces like cabinets, pantries and closets in your home. Place it in your basement, attic, garage or storage shed for a lighting option in those hard-to-get-to places. There is no wiring involved in the battery-operated light installation process so it can easily be placed almost anywhere. This versatile light ensures that you can see into most nooks, corners and crannies to protect against unexpected surprises like spiders or other insects hiding in the shadows. The indoor wall-mounted or portable light can be placed on your nightstand to serve as an emergency light source. Line your dark hallway with them to make your children feel safe and secure at night. Adults and children can use them thanks to the easy-to-use design. Place tap lights around your home to help light the way. By illuminating hallways and staircases, they add safety and security for your family and guests.

• Simple to use, press lens to turn the light on and off
• Compact, portable and lightweight, this push activated puck light can be used under cabinet, drawer, closet, pantry shelf, attic, bathroom, nightstand, hallway, garage, car trunk and more
• Wireless lighting with no wiring needed, convenient and dependable lighting for emergencies and power outages. Add light to your home without the need for an electrician.
• Tap light is battery operated and requires 4 x AA batteries (not included)
• Easy to install, place on tabletop or wall mount using keyhole or double-sided tape. For indoor use only, comes with 90 day limited

User questions & answers

Question:	Havent gotten mine yet. What kind of batteries does it run? Im looking for a rechargeable options
Answer:	Hi Freedom McCauley, thank you for your question. Each of our Energizer Tap Lights requires 4 x AA batteries. If you have any further questions, please don’t hesitate to give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday through Friday at 1-800-654-8483. Thank you.
Question:	What is the dimensions
Answer:	Hello mama2sp, thank you for your question. This item is 5.6 x 2.05 x 5.6
Question:	How many lumens is this
Answer:	Hello JoAnn Sims, thank for your question. Since this item is battery powered and not plug-in, it is not rated in lumens.

Product features

Energizer LED Tap Light

Push Activated

Powered By 4 AA Batteries (Not Included)

Mounting Hardware Included

Product description

The GE Tap Light will illuminate small spaces like cabinets, pantries and closets in your home. Place it in your basement, attic, garage or storage shed for a lighting option in those hard-to-get-to places. There is no wiring involved in the battery-operated light installation process so it can easily be placed almost anywhere. This versatile light ensures that you can see into most nooks, corners and crannies to protect against unexpected surprises like spiders or other insects hiding in the shadows. The indoor wall-mounted or portable light can be placed on your nightstand to serve as an emergency light source. Line your dark hallway with them to make your children feel safe and secure at night. Adults and children can use them thanks to the easy-to-use design. Place tap lights around your home to help light the way. By illuminating hallways and staircases, they add safety and security for your family and guests.

From the Manufacturer

GE Battery Operated Push On/Off Round Closet Light is perfect for any room or space in your home, RV or office. Installs anywhere. No more costly wiring.

• Simple to use, press lens to turn the light on and off
• Compact, portable and lightweight, this push activated puck light can be used under cabinet, drawer, closet, pantry shelf, attic, bathroom, nightstand, hallway, garage, car trunk, camper, RV and more
• Wireless lighting with no wiring needed, convenient and dependable lighting for emergencies and power outages. Add light to your home without the need for an electrician.
• Tap light is battery operated and requires 4 x AA batteries (not included)
• Easy to install, place on tabletop or wall mount using keyhole. For indoor use only, comes with 3-year limited warranty

User questions & answers

Question:	Where can i get a replacement bulb. What size, type bulb dies it use
Answer:	Hmmm, thats a tough one. It probably would but you might be better served with a solid light if you want a good amount of brightness. This one has tiny holes for the light to make the projections.
Question:	is it good for a reading night light
Answer:	Our daughter has lavender walls, and it showed up fine on them and the white ceiling, while the unit worked. The Christmas light I've replaced the led with is both white, pale, and hard to see against the wall. We've since replaced the unit and I recommend you look at this, http://www.amazon.com/Cloud-Twilight-Constellation-Night-Light/dp/B000VZKGYY/ref=cm_sw_em_r_awdotod_u-BTub1E3Z7RB_tt . It's much brighter, has more colors, shows up far better, and our daughter loves the device.
Question:	is this self adhesive
Answer:	It's bright if it's dark only. I don't think you would be happy with the results.
Question:	what is the seriel number for the light bulb? I'm looking for a replacement
Answer:	Yes

Product description

This compact light makes it easy to add extra-bright illumination to any space. It attaches to surfaces with the included adhesive strips as well as with the integral mounting bracket. Once installed, the light can be detached from the bracket for handheld use.

From the Manufacturer

Illuminate dark cupboards, closets and corners with a simple tap of this easy to install LED light

• One Touch Operation -- Tapping the center of the light turns it on and off
• LED Floodlight Technology – Provides an ultra-bright, glare free, wide beam of light where you need it most
• Install Anywhere -- Sticks to a variety of surfaces, adhesive strips for easy installation included
• LED Bulbs – 9 Energy efficient LED bulbs provide ultra-bright light that never needs replacing
• Battery Operated – Operates for up to 100 hours on 3 AAA batteries (Not included)

User questions & answers

Question:	how long do the bulbs last
Answer:	Sorry for the long response time. LED bulbs literally last for years. Mine is going strong andI expect it to last and last. It's the batteries that need replacement as others have said - aboutonce per year. These are great for RVs or van conversions as they don't use a drop of energy from the 12V battery and give out a good amt. of light.
Question:	how many come in a pack
Answer:	as I recall 2 or 3...they do not adhere very well, or @ least not in the golf cart...nice & bright though.
Question:	Is it waterproof for use on a shower ceiling
Answer:	No, it is not waterproof. I wouldn't use it on a shower ceiling.
Question:	what is the actual size of the fixture
Answer:	it's about the size of a Krispy Kreme donut.... haha sorry I couldn't think of anything else at the moment...

Product features

How it works

Battery-operated stick-on tap lights with convenient tap-on/off technology.

Tap on/off operation makes it easy for anyone to use.

LEDs

Super-bright LEDs offer energy-efficient lighting and never need replacing.

Energy efficent LEDs cost pennies to operate extend battery life and never need replacement.

9 LED Wireless Stick-on Tap Light (Silver)

9 LED Wireless Stick-on Tap Light (Black)

9 LED Wireless Stick-on Tap Light (Bronze)

9 LED Wireless Stick-on Tap Light (White)

Easy Installation

Installs in minutes using supplied adhesive tape.

Multiple Use

Lights any dark space, closet, cabinet, counters, utility room.

Mount Anywhere

No wires, no plugs perfect for stairs, hallway, or closet.

Product description

Product Includes: 60 X T-Tap Wire Terminals (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; 60 X Male Spade Connector (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; Material: Copper + Nylon Max Ambient Temperature: 106℃.

• Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job
• Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece; Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it
• Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently
• Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire
• Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out

User questions & answers

Question:	Can this be removed or once you put it on it has to stay
Answer:	You can take the clips off but they leave a small cut in the insulation of the wire but the pigtail wire can be easily removed and replaced
Question:	Can this be used to tap 7 lunes to one live load line? Don’t ask why; electrician is an idiot
Answer:	Yes, if there is room for that many on the line. And either the line being tapped should be fused for the total load of all lines, or each individual line should be properly fused for its load.
Question:	Will the large 12 gauge yellow ones work for an outdoor landscape "thicker insulation" burial wire gauge 14 or 16 ? Anyone tried this with success
Answer:	Why would you use these on landscape wiring?? They are not good to use in wet locations. You can either strip the wire back a little fi=urther so the insulation stops at the connector, or you can slightly shave down the insulation to make it thinner so it slides partially into the end of the connector.
Question:	I see some say these are fuse holders. What is it, fuse holder or wire connectors
Answer:	I purchased the Nilight N1-FH01 inline fuse holders. This 120 pc item is not fuse holders. It's possible reviews for all Nilight items are being mixed together and posted with each item.

Product features

Specifications

Quick Splice Connector:

Red | 22-18 Gauge - Wire range (0.5-1.0mm²).

Blue |16-14 Gauge - Wire range (0.75-2.5mm²).

Yellow |12-10 Gauge - Wire range (0.5-1.0mm²).

Nylon Fully Insulated Male Spade terminals:

Red | 22-18 Gauge Wire range: 0.5-1.5mm² (Max current 10A).

Blue |16-14 Gauge Wire range: 1.5-2.5mm² (Max current 15A).

Yellow | 12-10 Gauge Wire range: 4-6mm² (Max current 24A).

Easy Identification

Color-coded tubing makes it easy to identify the right size of the connector for every application.Red: AWG 22-18; Blue: AWG 18-14; Yellow: AWG 12-10.

Safety and reliable

These Self-Stripping Electrical T-Tap Spade Connectors combo makes tapping into an existing wire quick, easy, and reliable, no wire stripping needed.

High Quality

The cores are made of true tinned copper for maximum conductivity and the strongest crimps. It prevents the wire from shorting out efficiently.

Product description

Bring a little more light to your kitchen, laundry or utility area and other spaces with the Ecolight Battery-Operated BO1083-WHG-06LF3-E 6” White LED Tap Bar with Auto Timer! The 4000K for bright white task lighting makes it easy to complete task all with a simple tap to the lense. The slim style of the unit blends in seamlessly with any decor and the 40 lumens readily meet most lighting requirements for smaller spaces. Simply tap the light to turn it on or off for quick, accessible lighting - no more fumbling for a light switch in the dark! The light is easily mounted with a Command Strip by 3M for damage-free mounting. Ideal for kitchen undercabinets, cupboards, shelves, utility or laundry rooms and other spaces. This light is highly versatile and easy to install on any flat surface with the included Command Strip by 3M. This light is rated for up to 30,000 hours of lamp life and provides 18 full hours of illumination on a full battery charge. Includes one 6" Ecolight Battery-Operated BO1083-WHG-06LF3-E White LED Tap Bar with Auto Timer in white, Command Strip by 3M, a screw, and three AA batteries. Measures 6"L x 2.5"W x 1.1"H.

• CONVENIENCE - Tap on/off activation makes it easy for anyone to use. An ideal lighting solution for under cabinets, work spaces, recreational areas, etc.
• BRIGHT LIGHT - Light output of 40 lumens. 4000K color temperature casts a bright, neutral white light.
• AUTO TIMER - Features an auto-off switch, turning off unassisted after 1 minute, 5 minutes, or 15 minutes to preserve battery life.
• LONG LASTING - Lamp life rated at 30,000 hours, with 18 hours of battery life at full charge, no wiring required.
• EASY AND FLEXIBLE MOUNTING - Enjoy easy and quick installation with the included small damage-free Picture Hanging Command Strip by 3M or screw, and a 6-year limited warranty. Measures 6"L x 2.5"W x 1.1"H and weighs 0.272lbs. 3AA batteries included.

User questions & answers

Question:	Is the timer an actual timer or just turns off after a certain period of time. Can you set it to light at a certain time of day? Thanks
Answer:	It has several set time settings, 5 minutes, 10 and 15 minutes plus full on. For the three time settings the lights shut off. On is on until you press the cover then they shut off. No timer.
Question:	Does this take AA or AAA batteries? Also, are adhesive mounting strips included
Answer:	Just a quick correction to one of the above answers: this product uses 3 AA batteries, not 2. Included mounting options are: two sets of 3M strips, and 2 screws (vertical mounting only.)
Question:	Can you get additional stips if you change your mind and want it mounted somewhere else
Answer:	I would buy more command strips, either online or locally at a hardware store if needed.
Question:	Do these have enough light for reading
Answer:	Yes, but it also depends on where you're going to position the light. It wouldn't work if you had it too far away or in a poor position relative to the reading material.

Product description

This compact, low-profile light suits a variety of spaces. Its adhesive backing makes it simple to mount to any surface. Tapping the center of the light turns it on. This light is useful for illuminating dark storage areas and workspaces. Once installed, the light can be detached from the bracket for handheld use.

• One Touch Operation - Tapping the center of the light turns it on and off. A versatile, instant lighting solution for any dark space, closet, cabinet, autos, boat, RVs and more.
• Energy efficent LEDs cost pennies to operate, extend battery life, and never need replacement.
• Easy Installation - Installs instantly using supplied mounting tape, no wiring necessary.
• Each light uses 3 'AAA' batteries (sold separately).
• Included accessories: Double-stick tape, screws and drywall anchors.
• Set of 3 battery-operated stick-on tap lights with convenient tap-on/off technology
• Super-bright LEDs offer energy-efficient lighting and never need replacing

User questions & answers

Question:	Will these lights stick to drywall
Answer:	Probably so. They have a very sticky back. I stuck them under my kitchen cabinet. I must tell you though, that they are not a very bright light.
Question:	Once they are stuck, how do you change the batteries? Will i have to change the double sided tape everytime i need to change the batteries
Answer:	You just unscrew the bottom from the top. The top stays attached to wherever you stuck it and you can easily change the batteries in the lower section of the lite.
Question:	If you keep it on, how long does it last before battery dies
Answer:	10-15. Not the 100 that the description claims. Don't know why they're so battery hungry.
Question:	Is it yellow (warm) light? Or white (cold) light
Answer:	It's white light..

Product features

How it works

Set of 3 battery-operated stick-on tap lights with convenient tap-on/off technology.

Tap on/off operation makes it easy for anyone to use.

LEDs

Super-bright LEDs offer energy-efficient lighting and never need replacing.

Energy efficent LEDs cost pennies to operate extend battery life and never need replacement.

3 LED Wireless Stick-on Tap Light

3-Pack, Silver.

3 LED Wireless Stick-on Tap Light

3-Pack, Black.

3 LED Wireless Stick-on Tap Light

3-Pack, Bronze.

3 LED Wireless Stick-on Tap Light

3-Pack, White.

Easy Installation

Installs in minutes using supplied adhesive tape.

Multiple Use

Lights any dark space, closet, cabinet, counters, utility room.

Mount Anywhere

No wires, no plugs perfect for stairs, hallway, or closet.