9 best lp ceiling fan remotes

Product description

2 Pack Aubric Universal Ceiling Fan Remote Control Kits

Say goodbye to single control to your ceiling fan and light via pull chain or wall switch! Let our Aubric fan remote control kit help you to convert your traditional ceiling fan with light into a remote controllable one. It’s easy to control your fan and light from anywhere at any time!



Aubric universal fan and light remote control is suitable for most three speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this wireless controller in few steps.



RF technology. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory before delivery. It works individually.



Universal version. Works well with most of ceiling fans in market. Well compatible with Hunter, Hampton Bay, Harbor Breeze, Westinghouse, Honeywell and other well-known ceiling fan brands.



Beep ON/OFF settings. Press and hold "STOP" button in remote can turn on or turn off the beep. The default setting is beep on. You can turn on or off the beep in anytime.



NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.



Package includes:

2 X Fan Lamp Receiver

2 X Remote Control

10 X Wire Connectors

• Universal Fit Ceiling Fan Add On Remote - No more getting up to turn the lights/fan off after reading in bed/sleeping! It adds remote control compatibility to any fan. Aubric Universal Ceiling Fan Remote Controls Kit works well with 95 percent of ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one.
• Multi Fuction Remote Control Kits for Celing Fan Lights - 3 in 1 function, includes 4 buttons for Fan speeds control (High/ Medium/ Low) and OFF; separate light on and off control (no dimming); and 4 buttons for countdown timing remote setting and control (1H/ 2H/ 4H/ 8H).
• Easy Installation - The ceiling fan remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light.
• RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs.
• Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE.

User questions & answers

Question:	How do I make one remote control 3 receivers
Answer:	Sorry you can have 3 remotes to control 1 receiver, but we do not suggest you to have 1 remote to control more receivers. It may not work properly.

Product features

2 Pack Aubric Universal Ceiling Fan and Light Remote Control Kits

• Say goodbye to single control to your ceiling fan and light via pull chain or wall switch! Let our Aubric fan remote control kit help you to convert your traditional ceiling fan with light into a remote controllable one. It’s easy to control your fan and light from anywhere at any time!
• Aubric universal fan and light remote control is suitable for most three speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this wireless controller in few steps.
• Package includes 2 Pack Universal Fan Remote Control Kits

RF Remote Control

Simply adds this fan controller to your ceiling fan to make it remote controllable. Change your fan speed or turn on/off light from anywhere! Please note the receiver does not have the function of reverse.

3 Speed Control & Timer Function

The wireless ceiling fan control enables you to adjust the fan 3 speed, turn on/off light (no dimming), and time schedule settings. Make your life easier and more convenient.

Wall Moutable Remote Control

The remote control is wall mountable with the included holder. Make it work just like a wall switch. No need to look for remote control everywhere.

Easy Installation

1. Remove your fan canopy.

2. Wire the receiver to fan and light correctly.

3. Fix the receiver in the canopy.

4. Close your fan canopy.

Option for Beep ON or OFF

It is designed with a beep sound for confirmation of each operation. To turn it on or off, re-power the receiver and within 5 seconds, long press the "STOP" button until you get 3 beeps.

Universal Fit

Aubric universal ceiling fan remote control kit works well with most of ceiling fan with light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and others well-known brands.

Universal Ceiling Fan Remote Control Kit

The remote control has been paired to the receiver when sealed in factory. You just need to power on the receiver with correct wire connection and install batteries to the remote control. That's it!

2. To Pair With Multi Remote Controls

Each receiver can be paired up to 5 remote controls.

Simply power off the receiver and then power it back on. Within 5 seconds, press the "Hi" & "Light" buttons until you get 3 beeps from the receiver. The new pairing is complete.

3. To Unpair A Remote Control

Simply press the "Stop" and "2H" buttons until you get 3 beeps from the receiver, the remote control is removed from the receiver.

Product description

The contemporary universal fan/light remote control comes in an elegant white finish. It has separate buttons for three fan speeds plus "Instant on/off" option. It also features full range light dimming and manual light operation with the included wall switch access plate and cradle. This lightweight remote control works with a variety of fans and is the perfect solution for control in the palm of your hand.

• MODERN FAN REMOTE: The universal remote matches any decor and keeps home interior current and inspired; Measures 4.75 x 3 x 0.75 Inch
• MULTI-SPEED CONTROL: The ceiling fan remote comes with three separate buttons of wind speeds and an "Instant on/off" option for quick fan control
• FULL-RANGE LIGHT OPERATION: Features wall switch access plate and lets you adjust the ambiance of your space with full-range light dimming option or manual operation
• COMPATIBILITY: This remote works with all brands of ceiling fans (as long as receiver fits in the canopy of the fan)
• FREQUENCY RANGE: The hunter ceiling fan remote control offers a range of up to 75 feet

User questions & answers

Question:	I'm on my second unit, I installed the fan and remote at the same time. about two or three weeks later the remote stops working. Any answers
Answer:	I presume that you did check to make sure that the wall switch was in the "ON" position when the failure occurred. You basically have two switches in series. Both must be in the "CLOSED" or "ON" position for proper functioning. If the wall switch was "ON" and the battery was good as indicated by the LED then it could be a defective receiver. If there are solid state components in the receiver then a failure in the first few weeks is almost more likely than after 5 years since the tiniest spec of dirt migrating on the solid-state devices can cause failure. This kind of dirt migration usually happens in the first 90 days after warm up and cool down cycles.
Question:	They write the receiver must fit in the canopy but they don`t provide receiver dimension. Very bad! Does anyone have a photo of the receiver with size
Answer:	The average receiver is approximately 3 1/2" long, 2 1/4" wide, and 1/2" thick. I have installed 15-20 of them and never encountered a receiver that would not fir within the fan canopy. Some flush mount ceiling fan canopies are tight but newer model fans accommodate most receivers.
Question:	does it work with hunter
Answer:	Yes, it works with any Hunter fan. I bought 2 different Hunter fans and it works perfectly with both!
Question:	Can this be used right away to replace my damaged one, or do you need to take the fan apart
Answer:	It cannot be used right away out of the box. You have to take the fan apart. This remote comes with a specific receiver that you have to use and replace your old receiver with. If your fan has the receiver in the main manifold of the fan, the big part the blades are actually attached to, then I would recommend just getting another fan. Taking apart the main motor housing is a pain. If the receiver is in the base part of the fan, where the support/mounting pole meets the ceiling, in the little dome, you can pop off the molding and rewire the new receiver in place.I bought 2 of these remotes as replacements hoping I could just reprogram them via frequency dip switches (like a lot of other fan remotes have) and not have to replace the old receiver in the fan and go through the hassle of rewiring it, but that ins't possible with this remote. The receiver unit must be replaced with the one that comes in the packaging. I hope this helps.

Product features

Universal Remote Control

The included handheld remote allows you to control your ceiling fan speed and dim the light from wherever you are in the room. Wall mounted cradle included so you always know where the remote is.

Why Hunter?

Since inventing the ceiling fan in 1886, we’ve put years of research into new designs, ground-breaking innovation, and technological advances while continually delivering the Hunter brand promise. From our high velocity SureSpeed fans to the color-controlled Tunable White LED, we continually reinvent the wheel in ways that satisfy our customers.

Product description

HOW TO USE?

Just set the DIP switch pattern of this remote control to be the same as the DIP switch pattern of the original remote control. If you don’t know the original DIP switch pattern, you need to try these 16 possibilities: (0 is down and 1 is up) 0000, 0001, 0010, 0100, 0110, 0101, 0011, 0111, 1111, 1110, 1101, 1011, 1001, 1010, 1100, 1000



The manufacturer of this remote has provided remote control and receiver technical support for many well-known brands of ceiling fans in the past. Therefore, the quality and performance of this original OEM remote control is reliable.



Specification

Material: ABS

Require: 9V battery (not included)

Effective Distance: 50 ft (Without thick obstacles)

Speed Regulation: 3 gears to change



Package Includes(9V battery is not included)

1* Remote Control

1* Wall mount

2* Screw

1* Paper description

• 53T Ceiling Fan Remote Control is a perfect replacement of Hampton Bay and Harbor Breeze FAN-53T, FAN-35T, L3HFAN35T, L3HFAN35T1, FAN-HD5, FAN-11T, KUJCE9103. It is manufactured by the original OEM and approved by the FCC.
• MAKE SURE - Your original remote the same as the picture shows. Your original remote control has the same DIP switches as the remote control in the picture. Their DIP switches are hidden in the battery slot. This remote control has no programming function. It cannot replace the remote which has a programming function, unless you can make sure that the receiver in your fan has such a DIP switch.
• This remote control controls the 3-speeds of your ceiling fan (low, medium, high), The Light on/off, Dimming (As long as your original remote can dim light). This remote control cannot reverse the fan. Just set the DIP switch pattern of new remote control to be the same as the DIP switch pattern of the original remote control.
• This is only a transmitter, the package does not include a receiver or 9V battery. Easy to operate and safe. It only takes less than half a second from when you press this remote control button to when your ceiling fan receives a signal and reacts.
• We are very willing to provide customers with 100% satisfactory service. Whenever you have any questions, our customer service will answer them for you. We provide our customers with 24/7 service.

User questions & answers

Question:	will this work with a UC7067rc receiver
Answer:	Seeing as the UC7067rc has a 4 switch coding function, I would say yes.
Question:	Does this remote have adjustable dips to match the receiver
Answer:	Yes, There are dip switches under the battery cover.
Question:	Can i control this ceiling fan remote control with my phone
Answer:	Sorry, but there is not bluetooth with this remote - so no you will not be able to control the receiver with your phone.
Question:	I bought this for my harbor breeze bdb52lw5n but i do not see any dip switches in the fan itself
Answer:	The switches will not be in the fan itself. They will be in the remote or wall remote switch.
Question:	How do you reverse the rotation of the fan blades with the remote
Answer:	The only way to reverse the fan is to flip the switch on the fan itself. The remote can’t change the direction of the blades.
Question:	Is it possible to get the wall mount only for this remote
Answer:	When you purchased the remote it comes with all the wall mounting parts. Hope this helps.
Question:	My remote only turns the light on /off. Can't dim the lights anymore. What can I do
Answer:	If you have led light bulbs , they have to be dimmable. Ours dims by holding the light button down.
Question:	Will this work with Home Decorators collection fans
Answer:	Yes, but I haven’t be able to install it bc an electrician is charging me 150 $$ just for a home visit.

Product description

New UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Home Decorators Collection Ceiling Fan Wireless Remote with Remote Control Mount



Featurte：

Model:UC7083T

Compatible Device Type: Ceiling Fan

Easy and full access to all the buttons

US Seller Faster shipping and excellent service

3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off.

FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse.

Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself).





Compatible brands:



Hampton-Bay, Harbor-Breeze, Home Decorators Collection









Package Content:



1X Remote Control (Batteries Not Included)

1x Wall mount

2x Screw

1x Paper description



If you have any question of the remote control, please contact us for further support.Thanks!

• New UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Home Decorators Collection Ceiling Fan Wireless Remote with Remote Control Mount
• Compatible brands:Hampton-Bay, Harbor-Breeze, Home Decorators Collection
• 3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off.
• FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse.
• Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself).

Product description

The maximum light carrying power is 240W, which supports ceiling fans with multiple bulbs. Multiple inspection procedures make it safer. Even if you don't have any electrician knowledge, you can complete the installation according to the product manual in the package.

REMINDER

Please install a new battery for the transmitter before use.

After-sales Service

:) If you have any questions during use, please contact us. We are proud to offer 24/7 service to all our customers. We wish you a happy shopping!

• BAYICON Universal Ceiling Fan Remote Control Kit with Original OEM, FCC approved.
• Specially made for Hampton Bay Harbor Breeze Hunter ceiling fans, but works with almost all regular ceiling fans.
• Control the 3-speeds of the ceiling fan (low, medium, high), the light on/off, dimming.
• It uses a 12V battery, but the battery is not included. This is a kit, including the receiver.
• The response speed is very fast, it takes less than half a second.

Product description

Universal Replacement - This ceiling fan remote control kit is specifically works with almost 95 percent regular ceiling fan lights, such as Hunter, Hampton Bay, Westinghouse, Harbor Breeze fans and Others well-known brands.

• ☞Super Small Size and TIMER   You just need very small space to install the receiver unit into most fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size.TIMER buttons can set the sleep time from 1 to 8 hours
• ☞NO  Buzzer noise   This universal ceiling fan remote is Designed to be no buzzer noise so as not to affect others
• Replacement The super small size Ceiling Fan Remote Control is replacement of Hunter Westinghouse,Hampton Bay and Harbor Breeze .
•  NOTE   If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
• Easy Install - Installation of the celling fan remote kit is very easy and fast. Wire nuts, install guide and fan remote holder are included.

Product description

New UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Home Decorators Collection Ceiling Fan Remote



Featurte：

Model:UC7083T

Compatible Device Type: Ceiling Fan

Easy and full access to all the buttons

US Seller Faster shipping and excellent service

3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off.

FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse.

Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself).





Compatible brands:



Hampton-Bay, Harbor-Breeze, Home Decorators Collection









Package Content:



1X Remote Control (Batteries and User Manual Not Included)







If you have any question of the remote control, please contact us for further support.Thanks!

• New UC7083T Replacement Remote Control fit for Hampton Bay Ceiling Fan
• Compatible brands:Hampton-Bay, Harbor-Breeze, Home Decorators Collection
• 3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off.
• FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse.
• Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself).

Product description

What can we do?

Convert the traditional ceiling fan light to remote controllable one

Scope of Application: Home, Restaurant, Office, Hotel, Club, Display Hall, Garage

Why Choose Our Item?

1, UNIVERSAL APPLICATION and WIDE REPLACEMENT

Aubric Universal Ceiling Fan Remote Control Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands.

2, NO MECHANICAL RELAY INSIDE, No time delay, No switch electric arc, No lifetime limit

3, SUPER SMALL SIZE, It is possible to install this unit into your mini-ceiling fan which just have narrow space in canopy

4, MUTI-FUNCTIONS

* FAN control: 3 fan speeds (HIGH / MEDIUM / LOW) and off button(stop fan)

* Timing control: 1H, 2H, 4H, 8H

* Light control: lamp ON/OFF

Key Parameter

Input voltage: AC 80~264V 50/60HZ

Max power for FAN:100W

Max power for Light: 180W(incandescent) / 100W(LED)

Wireless Transmission: RF 433MHz

Remote distance: 30m in open air

Battery: 2XAAA battery (NOT INCLUDE)

* There is a one-to-one correspondence between the remote control and the receiver

* Include 5 pcs Screw connector, you do not need another tools or accessories to connect the wires

IMPORTANT TIPS

1, Check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size

2, If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together

3, The receiver does not have the function of Reverse

4, Battery not include

• WIDE REPLACEMENT - Universal Ceiling Fan Remote Controls Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse.
• SUPER SMALL SIZE - Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size.
• ADVANCED TECHNOLOGY - Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in muti-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime.
• 3 IN 1 MUTI-FUNCTION - Include 4 separate buttons for Fan control: 3-speeds (High/Medium/Low) and OFF; 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H; 1 button for light ON/OFF control (no dimming). NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
• 12 MONTHS WARRANTY - 30 days full refund, 12-months warranty and 365 days technical support. Your purchase today is completely RISK-FREE. If you are not completely satisfied for our controller, let us know for a full refund. Simple as that. Why wait? Get it today and change your ceiling fan and light to Remote control one!

• Plastic
• ☞Easy Installation - Installation of the Universal Ceiling Fan Remote Controls Kit is a breeze and the looks of the remote are second to none. No need to take off the light kit and blades. only 5 wire hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires out of the ceiling connect the remote to electricity, and three wires into the fan control the fan.
• ☞Universal Fit Ceiling Fan Add On Remote - No more getting up to turn the lights/fan off after reading in bed/sleeping! It adds remote control compatibility to any fan. LPHUMEX Universal Ceiling Fan Remote Controls Kit works well with 95 percent of ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one.
• ☞Good Signal - No problem with signal, you can adjust the fan from another room, or even downstairs.
• ☞Multi-Fuctions - Includes separate buttons for 3 fan speeds,designed to separately ceiling fan remote control speed and light; Includes wall cradle for handheld remote control,This kit converts regular ceiling fan into a remote controllable one.
• ☞Buy with Confidence ! - Strong Signal and timely tech support.

User questions & answers

Question:	Will this ceiling fan remote control kit work with any fan
Answer:	This is a universal one. This fan remote kit will work with any fan & light combination. So long as there is enough room within the dome at the ceiling to contain the unit.(Please make sure of this before buy)
Question:	Can I use 2 of these remotes kits with different fans close togehter without 1 remote activating both fans
Answer:	these are fixed code fan light controls. Each remote can only control the corresponding receiver(fan light), they will not mutual interference each other.
Question:	Will it work on a fans with 4 level fan settings
Answer:	Even if the fan has 4 level settings it must be placed on high for the remote to work properly. The remote will then give you 3 speed options.
Question:	What is the RF frequency of this remote & receiver
Answer:	443

Product features

So easy to install!

Installation is a breeze and the looks of the remote are second to none. Just make sure you have room in ceiling fan for the remote box. only 5 wire hook up. The most challenging part was placing the receiver in the canopy. Connecting the receiver to the fan was child's play and the receiver to the house wiring was even easier.

Lazy Man Choice!

This ceiling fan remote comes with a fan remote holder for the wall switch or which can be mounted by the bed , so that you can leave it over the wall switch or take it out like a remote. It is so nice to not get out of bed to turn the fan on or change a setting. You will love it!

Fan Remote Control Kit Function!

• 3 Fan Speed Control: High/Medium/Low
• 4 Timing Control:1H / 2H / 4H / 8H]
• Fan Lamp/Fan: ON/OFF
• Voltage:85V-260V/60HZ
• Max Power:(Fan:120W,Lamp in total:300W)
• Please do not overload!!