13 best kitchen sink with grids

• IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
• Grid dimension: 26-1/16" x 14-1/16" for your sink bottom with Corner Radius R 3-1/2"
• CENTERED DRAIN LOCATION.
• 304 Premium stainless steel construction with light weight design to ensure durability and user-friendliness at the same time.
• Limited life warranty. Serene Valley is renowned for outstanding customer service. We will be always there for you when an issue arises. You will be pleasantly surprised with the result you will get

User questions & answers

Question:	My stainless steel farm style sink measures 26.75 by 15.75 inches with a center drain and a 0 radius. What model is best ? Thanks
Answer:	Hi, Thanks for asking. But we dont have a grid of your size with center drain. Sorry about it.
Question:	Are rubber feet supposed to touch bottom
Answer:	Hi, normally all the feet woulf touch the bottom, but sometimes it would not because of irregular sink slope. If the grid edge doesn't touch the sink wall, it should be okay. Thanks
Question:	Really like this and it fits our new sink, but a couple of the feet (especially on bottom left) are scratching my sink. Any ideas on how to stop this
Answer:	Contact seller because the rack supposed to have rubber covers the feet, my rack have them and also inside the box was a little zipp look bag with extras.
Question:	I wanted to know how to get some of the little rubber covers/feet on the item?a couple have fallen off and went down the garbage disposal
Answer:	Hi, Please send us your address and the grid model you ordered. We will ship you free replacement feet asap. Thank you.
Question:	Has anyone experience skin purging with this product? I recently began using this & my face is breaking out something fierce
Answer:	Yes, I had about a month of purging, but just small pimples in areas that I typically have hormonal breakouts. If you are having breakouts worse than usual, or in areas you don’t usually have them, it may be a reaction and not purging.
Question:	what percent retinol is this
Answer:	The label shows 500,000 IUs. I am no expert but I believe this is a reasonably high dose for a non prescription product.
Question:	I see this product with this label & another product same company,same name, different label & much different price? What's up with that? I
Answer:	I think one is a serum and the other is a lotion. I don't think it was worth the price. I bought the serum and the brightener, did not see any improvement.
Question:	how much retinol is in this product
Answer:	Retinol is basically just another name for Vitamin A. This products consists of 500,000 I.U.'s of Vitamin A. I have ordered and used this product before, and I was happy with the results. I hope this was helpful.

Product features

You May Also Like

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Product description

Elkay sink accessories are designed to fit perfectly and coordinate with your Elkay sink. From color matched drains to custom-sized stainless steel sink grids and wood cutting boards, we have what you need. Our accessories make the time at your kitchen, prep, bar or laundry sink more convenient, efficient and effortless.

• Material: Stainless Steel
• Constructed of solid stainless steel to resist corrosion.
• Specially designed feet protect sink bottom to keep it looking great.
• Properly positioned opening provides easy access to drain or disposer.
• Fits inside the dishwasher for convenient cleaning.

User questions & answers

Question:	Correct grid for model #etru30179pd
Answer:	This rack is for the ELGRU13322, how ever is it only off by 1/16 of an inch from the EBG2815, so it may work.
Question:	What is the correct size. Elkay states size is 28 5/16 x 14 5/16. Amazon shows 27.7 x 13.7 x 1 inches
Answer:	Amazon’s measurements are correct. Essentially 27 1/2 x 13 1/2
Question:	Which stainless steel protector fits the elkay eluh2816pd sink
Answer:	Thank you for your question on the Elkay LKOBG2915SS Stainless Steel Bottom Grid. We recommend the Elkay LKWOBG2816SS Stainless Steel Bottom Grid for the Elkay ELUH2816PD Lustertone Classic Stainless Steel Single Bowl Undermount Sink with Perfect Drain.
Question:	Am I able to purchase the small side rubber gadgets? I've already lost half of them. Thank you
Answer:	No idea but I lost most of mine too.

Product features

Sinks for Every Need

Stainless steel, quartz, fireclay and more, we offer a variety of materials, bowl configurations and sizes to meet your needs.

Sink Kits Available

Select sinks are offered in kits with drains and more, saving you the time of purchasing each piece separately.

Flexible Installation

Choose from undermount or drop-in sink installation, or make a statement by choosing a farmhouse-style design.

Crosstown Sinks

Beauty, function and contemporary design; the striking geometric aesthetic makes an impact in any kitchen.

Quartz Classic Sinks

Quartz Classic sinks have been adding color to kitchens for more than a decade.

Quartz Luxe Sinks

Quartz Luxe is exceptionally tough, silky to the touch, and comes in statement-making colors.

Lustertone Sinks

The repairable finish looks as great on day 3,000 as it does on day one.

Fireclay Sinks

Fireclay has timeless appeal. It offers long-lasting durability and a glossy shine

Elkay Faucets

Form meets function with features such as pull-down sprays and three-function hand sprayers.

Product description

Elkay sink accessories are designed to fit perfectly and coordinate with your Elkay sink. From color matched drains to custom-sized stainless steel sink grids and wood cutting boards, we have what you need. Our accessories make the time at your kitchen, prep, bar or laundry sink more convenient, efficient and effortless.

• PRODUCT DIMENSIONS: 28-1/4" x 15-1/4" x 1-1/4"
• CUSTOM SIZED: Designed to cover the bottom of specific Elkay sink bowls.These products should be hand washed in a mild detergent, rinsed thoroughly and hand dried
• CORROSION RESISTANT: Constructed of solid stainless steel to resist corrosion.
• PROTECTS SINK BOTTOM: Specially designed feet protect sink bottom to keep it looking great.
• DISHWASHER SAFE: Fits inside the dishwasher for convenient cleaning.
• CONVENIENT DRAIN OPENING: Properly positioned opening provides easy access to drain or disposer.
• INCREASE FUNCTIONALITY: Elkay accessories are designed to enhance the functionality of your sink and make your daily routines easier.
• It is recommended to clean Elkay accessories daily to avoid build-up of soap or mineral deposits, as these tend to have an adverse effect on the appearance of the product. For daily cleaning use an ordinary mild detergent and soft cloth to rinse and dry the sink. Allowing water or cleaners to evaporate will negatively impact the look of the accessory. To avoid this, it is important to dry the accessory after each use.

User questions & answers

Question:	where can i purchase replacement side bumpers
Answer:	It comes pretty sharp but can be better. Most new saws need some touching up.
Question:	Is this the proper rack for model #hdu32189f
Answer:	Sharpened for rip cut.
Question:	How do I measure my sink
Answer:	15PPI according to the Spear and Jackson site. http://www.spearandjackson.com.au/products/SJ-9540B
Question:	Will this fit an Amerisink AS
Answer:	It is not made in the US. It is a British company. But there is no indication on the packaging nor the saw as to where it is made. It is well made.

Product features

Sinks for Every Need

Stainless steel, quartz, fireclay and more, we offer a variety of materials, bowl configurations and sizes to meet your needs.

Sink Kits Available

Select sinks are offered in kits with drains and more, saving you the time of purchasing each piece separately.

Flexible Installation

Choose from undermount or drop-in sink installation, or make a statement by choosing a farmhouse-style design.

Crosstown Sinks

Beauty, function and contemporary design; the striking geometric aesthetic makes an impact in any kitchen.

Quartz Classic Sinks

Quartz Classic sinks have been adding color to kitchens for more than a decade.

Quartz Luxe Sinks

Quartz Luxe is exceptionally tough, silky to the touch, and comes in statement-making colors.

Lustertone Sinks

The repairable finish looks as great on day 3,000 as it does on day one.

Fireclay Sinks

Fireclay has timeless appeal. It offers long-lasting durability and a glossy shine

Elkay Faucets

Form meets function with features such as pull-down sprays and three-function hand sprayers.

Product description

The OXO Good Grips Silicone Sink Mats are an innovative sink solution. The soft silicone provides a cushion to protect sink, glasses and dishes from scratching and chipping. The Silicone Sink Mats have feet that elevate them and allow for water flow and aeration. If you want to have an opening around your drain, the Silicone Sink Mat has a convenient pattern that allows you to cut a hole exactly where you need it, whether your drain is in the center or the back of your sink. The silicone is heat-safe, making it safe to place pots and pans in the sink directly from the stove. These Silicone Sink Mats are dishwasher safe and PVC, BPA and Phthalate free.

• Soft silicone is PVC-free and provides cushion to protect sink, glasses and dishes from scratching and chipping
• Feet elevate mat to allow for water flow and aeration
• Pattern allows for cutting a hole to accommodate most drain openings
• Small Sink Mat is the perfect size for most double sinks
• Heat-Safe silicone for placing pots and pans in sink directly from stove. Dishwasher safe
• Dimensions 16.25" x 12.75" x 0.25"

User questions & answers

Question:	Is this mat dishwasher safe
Answer:	No water splatter. I have a pullout spray spout, and water does not splash with either stream of water or spray mode. Holes are big enough in mat and it sits far enough off the sink base that this is not a problem. I have had the water splatter problem too with mats that sit directly on the sink base.
Question:	Hello - are these mats "soft" enough for my dog to stand on for when I bathe her in the sink? I need traction for her paws, and a soft grip is better
Answer:	The feet on the bottom are interspersed throughout and should hold a dishpan full of dishes and water with no problem.
Question:	This seems to have an odor out of the box. Does it fade over time
Answer:	I’ve never had to and these are my second set. If I did, I’d place them on the top shelf in the dishwasher. I usually spray them with Clorox cleanup if absolutely necessary. I hope this helps.
Question:	I can't clearly see the color of this sink mat. Is it gray, or clearish? I'm looking for a clear silicone sink mat. Thanks
Answer:	Very sturdy ..yes...But I wouldn't run it threw the heated drying though just to be safe!

• DESIGNED TO SIT AT THE BOTTOM OF YOUR KITCHEN SINK. PLEASE MEASURE THE BOTTOM OF YOUR SINK AS SHOWN IN THE VIDEO AT THE BOTTOM OF THE LEFT PICTURE DISPLAY. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
• Grid Corner Radius R 1-1/2".
• CENTERED DRAIN LOCATION.
• 304 Premium stainless steel to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear.
• Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided.

User questions & answers

Question:	Is this dishwasher safe
Answer:	Yes, it's dishwasher safe. But it's better to remove all the bumpers and feet in advance and put them back afterwards. Thanks
Question:	My sink is 26 1/2 by 13 1/2 with 3/4 radius. What do you suggest
Answer:	Hi Thank you for contacting us before purchase. Please refer to the video on our listing and make sure your 26-1/2" x 13-1/2" dim were taken from the sink bottom (about 1" up from the bottom). If yes and your sink have a center drain, then our best option is our SVM2613C. Thanks
Question:	My sink measures 25" x 12" measuring 1 inch from the bottom. Measuring the flat area as the edges curve. Will this grid fit my sink
Answer:	Yes, but you will have an 1”. My sink measures 25x13. Hope this helps.
Question:	Will this fit the Soci Stainless Steel undermount sink measurements 29.5 by
Answer:	Hi Thank you for reaching out to us before purchase. Our NDG2513C seems a bit small for your sink measured at 29.5x16.8". Please take a moment to watch the video on our listing and make sure your measurements were taken from your sink bottom (about 1" up from the bottom). You should also take a look at your sink drain location. Once you have these info, we can try to look for a right drain for you. Thanks

Product features

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Extra Solid Material

Serene Valley uses the highest standard when it comes to making kitchen bottom grids. The extra thick 1/4”diameter 304 stainless steel is used for the outer wire and 1/8" is for inner wire. The heavy duty 1x1" grid structuret won't flex and yield, no matter how heavy load you put it on.

• IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
• Grid dimension: 24-1/8" x 12-5/8" for your sink bottom with Corner Radius R 1-1/2".
• CENTERED DRAIN LOCATION.
• 304 Premium stainless steel construction with light weight design to ensure durability and user-friendliness at the same time.
• Limited life warranty. Serene Valley is renown for outstanding customer service. We will be always there for you when an issue arises. You will be pleasantly surprised with the result you will get.

User questions & answers

Question:	What material is it made of
Answer:	Hi our grid is made of 304 grade stainless steel. thanks
Question:	The measurements show 6 5/16" to the middle of the center of the sink, yet the grid width shows 14 5/8 - shouldn't that be
Answer:	Hi, Thank you for pointing out the mistake. The width of NLW2412C is indeed 12-5/8". We will make the correction right away. Thanks.
Question:	How do you order a specific size from the sizes available
Answer:	Hi if you know which model number you need from our chart, you may search for "serene valley xxxx" on Amazon to find it (xxx is the grid model number). If you are not sure which model to order, please refer to the video on any of our grid listing and do a measurement on your sink bottom first (1" up from the bottm). If you also contact us with your sink bottom dim, we can help you find the right one. Thanks
Question:	Do the outer black rubber pieces move or are they stationary
Answer:	Hi, The rubber bumpers and feets are removabale for the convenience of the dishwasher cleaning. Once the grid is cleaned, they can be put back on. When they are on, they won't move around. Thanks

Product features

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Product description

With clean lines and sleek shapes, Starstar kitchen accessories provide everyday efficiency with style. Constructed from premium stainless steel, this bottom grid protects your sink against damage from daily use and improves draining by keeping dishes elevated. Each grid is cushioned by soft protective bumpers to prevent scratching. Experience Starstar Quality, down to the details.

• Designed to conveniently fit into the bottom of the compatible kitchen sink
• Safeguards your fragile dishes and protects the enameled surface of your sink
• Premium T-304 Stainless Steel Construction
• Soft Protective Bumpers Prevent Scratching NOTE: Manual measurement half inch error is allowable

User questions & answers

Question:	How many inches is from the back of the grid to the center of the hole? i'm looking for about
Answer:	These are 4 1/2". Metal is 2 1/4 wide in back then from metal to very center is roughly 2 1/2. But if you want 3 1/2" looks like not much metal there ,may be weak being that narrow.??
Question:	What is the dimension from the back of the sink to the middle of the hole
Answer:	The back edge to the middle dimensions is 7.75inches
Question:	Our these grids used for Stainless steel sink
Answer:	I don’t have stainless so can’t answer but work great on my regular sink!
Question:	Does this come with the drain opening in the center
Answer:	No it does not come with drain. Only two grids.

• Stainless Steel Sink Grid Dimension: 26" X 14 1/16".
• Sink Protector with Rear Drain Location.
• Stainless Steel Construction.
• Sink Bottom Grid, as Drying Rack For Glassware and Crockery.
• Sink Grids for Single Bowl Kitchen Sinks.

User questions & answers

Question:	Is there a sink protector for 25" x 14" measurement
Answer:	Sorry, we do not currently have this size. If we have this size, we will notify you.
Question:	What is the radius at corners
Answer:	It's R15.

Product features

Stainless Steel Sink Grids Center Drain for Double Sink Bowl

• Center drain location

• Suitable for double sink bowl

* (The size of the grid in the above display is: 12 5/8'' x 14 5/16'')

Rear Drain Sink Grid for Single Sink Bowl

• Rear drain location

• Suitable for single sink bowl

* (The size of the grid in the above display is: 26" x 14 1/16")

Kitchen Sink Gird Detail Display

• Stainless steel material, corrosion-resistant and durable

• Rubber feet protect your sink from scratches

• A variety of sizes for you to choose

• IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
• Grid Corner Radius 3 1/2".
• CENTERED DRAIN LOCATION.
• 304 Premium stainless steel with heavy-duty design (outer wire diameter 1/4" and inner wire diameter 1/8") to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear.
• Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided.

User questions & answers

Question:	Will this protector fit a 881 Corian sink
Answer:	Sorry, we do not know the bowl bottom size for 881 Corian Sink. But if you can measure the sink bottom carefully using the way we descirbed in our diagram, you may be able to find one of our grids that fits your sink. Thank you.
Question:	Can the sink grid be put in the dishwashwer for cleaning? Have there been any issues with the vinyl feet, such as deteriorating or coming loose? Thx
Answer:	No worries about the dishwasher or the feet. It cleans up very nicely. I am very happy with this product.
Question:	Is there a foldable stainless sink grid so it fits in the dishwasher
Answer:	Mine doesn't fit in the dishwasher. Not sure if there I a foldable sink rack.
Question:	Where can I buy the rubber feet only
Answer:	Mine came with a few extras I believe.

Product features

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Extra Solid Material

Serene Valley uses the highest standard when it comes to making kitchen bottom grids. It won't flex and it won't yield, no matter how heavy load you put it on.

Product description

Take your Sinkology Kitchen sink to the next level with the Johnson bottom grid. Custom designed to fit perfectly with the Orwell (Model # SK202-30AC) and the center drain David (Model # SK203-31AC) single bowl kitchen sinks. Each Sinkology bottom grid is handmade to perfection in the United States and features a durable and heat resistant brown vinyl coating. Not only will your sink look better with a bottom grid it will also protect your sinks finish from standing dishes and helps wash away food debris. Protected by a Lifetime Warranty and made from 7 gauge steel, Sinkology bottom grids are designed to last a lifetime.

• Fits the Orwell (model # SK202-30AC) and David (model # SK203-31AC)
• Protects your copper sinks finish and fragile dishes
• Rubber feet provide added protection
• Durable and custom made vinyl coated in Antique Brown.Dishwasher safe, protected by a lifetime warranty
• Dimensions(inches): 27 x 15 x 2

User questions & answers

Question:	What is the actual size of the grid
Answer:	The product dimensions are 27 x 15 x 2 inches and are listed at the bottom product detail info section on the Amazon product page. This sink bottom grid was designed to fit specifically with the Sinkology brand Orwell sink (Model # SK202-30AC) and the center drain David sink (Model # SK203-31AC) single bowl kitchen sinks, but could be used on other sinks if the sink bowl dimensions were correct and the drain placement matched.
Question:	Is this the right grid for the ernst sink
Answer:	Yes, that's correct. The Johnson Grid (SG004-27) will fit the Ernst Single Bowl Bow-Front Apron Sink.
Question:	The plastic rubber feet cover has split open on one of the feet where can I get replacement? I just need a rubber overlay for the feet
Answer:	I didn’t have a problem with the rubber feet so I can’t really tell you. I would suggest to reach out to the seller.
Question:	So ... does this fit the SK202-30AC Transitional Orwell Undermount Handmade Solid Copper 30 In. Single Bowl Kitchen Sink In Antique Copper, 30-Inch
Answer:	Yes, it fits the Sinkology Orwell 30" undermount sink perfectly. My wife loves it. We have both the sink and the grid which is made for the sink.

Product features

Sinkology Kitchen Sink Bottom Grids

Customize your Sinkology kitchen sink with our exclusive antique brown finished bottom grids, which will coordinate beautifully with our copper and fireclay kitchen sinks. These bottom grids are designed specifically to fit with our Sinkology sinks. Not only will your sink look better with a bottom grid, but it will also protect your sinks finish from standing dishes and helps wash away food debris. Sinkology bottom grids are handmade in the USA of heavy-gauge steel. They are dishwasher safe and feature a durable and heat resistant brown vinyl coating.

SinkSense GridLogic Latch-on Bottom Grid Kitchen Sink Organizer in Antique Brown

GridLogic is an add-on accessory with six individual dish dividers that latches to your existing sink bottom grid to create organization and structure for separating glass, fine china, knives, pots and pans, and more. The vertical grid system maximizes the surface area of your sink by enabling you to safely stack dishes upright and organize your sink's space with easy modification to your GridLogic placement. With GridLogic's secure design, you can ensure your grid organizer is locked in place--yet it is easily removed for cleaning and flexibility.

• DESIGNED TO SIT AT THE BOTTOM OF YOUR KITCHEN SINK. PLEASE MEASURE THE BOTTOM OF YOUR SINK AS SHOWN IN THE VIDEO AT THE BOTTOM OF THE LEFT PICTURE DISPLAY. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
• Grid Corner Radius 3/16".
• REAR DRAIN LOCATION.
• 304 Premium stainless steel with heavy-duty design (outer wire diameter 1/4" and inner wire diameter 1/8") to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear.
• Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided.

User questions & answers

Question:	Can the grid be washed in the dishwasher
Answer:	Yes, it can be dishwashed. But it's better to remove the bumpers and feet before you put it in dishwasher. After it's done, then the feet can be put it back. Thanks
Question:	This is the exact dimension I need, but I need it with a center drain. Does it come in that configuration or can it be ordered
Answer:	Hi, this model with center drain is under development now. Its roll-out has been delayed by covid. We expect it to be available in Feb 2021. If you could wait, please come back to check it out in that time frame. Thanks
Question:	Do you have this greed in black finish please
Answer:	Sorry, we do not have this grid in black finish.
Question:	Is this item compatible with the Suneli F3219S sink
Answer:	I selected item by measuring the sink bottom , allowing 1/4" for round bottom edges, and location of drain opening and it fit perfectly. I am very happy with it. I do not have a Suneli sink
Question:	Are the measurements for these exactly 16x17 and 16x 11? That's the measurements of my sink so I want to make sure it will fit
Answer:	Yes, it is. Please when you measure your sink for the right size of grids. You have to measure inside bottom of your sink. Do not measure inside top of your sink because it is 1 inches longer.
Question:	Are the actual measurements 16x17 and 16x11 because the ones I just received are 15 3/4 x 16 1/2 and 15 3/4 x
Answer:	Mine are the smaller measurements. I think they round up for convenience.

Product features

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

Extra Solid Material

Serene Valley uses the highest standard when it comes to making kitchen bottom grids. It won't flex and it won't yield, no matter how heavy load you put it on.

Product description

Keep your kitchen sink looking new with a durable KRAUS stainless steel bottom grid. Guards against scratches and scuffs, and keeps dishes elevated to help draining. Silicone bumpers protect the sink surface, while chrome-plated finish offers a flawless look.

From the Manufacturer

With clean lines and sleek shapes, Kraus kitchen accessories provide everyday efficiency with style. Constructed from premium stainless steel, this bottom grid protects your sink against damage from daily use and improves draining by keeping dishes elevated. Each grid is cushioned by soft protective bumpers to prevent scratching. Experience Kraus Quality, down to the details.

• DESIGNED TO FIT KRAUS Standard PRO Series Single Bowl Kitchen Sink KHU100-30
• DURABLE STAINLESS STEEL CONSTRUCTION: Extra-tough T304 stainless steel
• PROTECTS YOUR KITCHEN SINK: Sink surface is protected against daily wear and tear
• CORROSION-RESISTANT FINISH: Looks great and is easy to clean
• CUSTOM SIZED: Dimensions 27 1/2" x 15 3/4" x 1 1/8"

User questions & answers

Question:	How do you recommend cleaning? too big for dishwasher. thx
Answer:	That's the one issue I have with this rack!! It doesn't fit in the dishwasher. I usually clean in the sink with a scrubby brush and dishwashing liquid. Make sure to get both sides - it gets gunky!
Question:	Will this fit for the kraus khu100-32 32 inch undermount single bowl
Answer:	It should be... Measure again your sink if its 32x18 you don't have a problem. See the specs on this product for your reference.
Question:	Looking for a grid that measures 25.5" x 13.5" and would love to buy on Amazon
Answer:	it's excellent, I bought this feud to replace the original one that came with the sink that was impossible to keep goo free. this one fits more snugly and it's completely level.
Question:	What is the difference between 100-30 & 200-30 stainless grid
Answer:	Dimensions only

Product description

Take your Sink ology kitchen sink to the next level with the Wren bottom grid. This bottom grid will protect your sink's surface from scrapes and scratches while also protecting fragile dishes from breaking. Made with durable 7-guage stainless steel, the Wren is a gorgeous and functional addition to your kitchen sink. Sinology's bottom grids are dishwasher safe, handmade in the USA, and protected with our Everyday Promise lifetime .

• Dimensions: 27" x 15" x 2"
• Frame and legs made with 7-gauge stainless steel
• Handcrafted in the USA
• Rubber feet protect your sink's finish from scrapes and scratches
• Heavy duty and dishwasher safe

User questions & answers

Question:	Does this grid fit the Elevate model of Sinkology farmhouse sink
Answer:	Great question as I have a 180 lb 26 year old who is emotionally 4. (Autism) He bounces! Bounces! Bounces! He has broken countless pieces of furniture. Couches, chairs, even a toilet. He has destroyed beds since he was 8 years old. Frames, box springs, mattresses. I will try this mattress with his old foam mattress under it on a steel frame that has held up well. He hasn’t had Springs for years at the expense of foam which only holds up to his bouncing, hanging off the edge in the same place, and falling on it from standing, for 12-18 mos. Wish us luck!
Question:	How can I get this item for my sink
Answer:	About 2 inches
Question:	What is the measurement of the square opening in the middle of the grid
Answer:	It should. May be a bit difficult. I have a battery grease gun and it makes it easier.

Product features

Sinkology Kitchen Sink Stainless Steel Bottom Grids

Customize your Sinkology kitchen sink with our stainless steel bottom grids, which will coordinate beautifully with our fireclay, stainless steel, and granite kitchen sinks. These bottom grids are designed specifically to fit with our Sinkology sinks. Not only will your sink look better with a bottom grid, but it will also protect your sinks finish from standing dishes and helps wash away food debris. Sinkology bottom grids are handmade in the USA of heavy-gauge steel. They are dishwasher safe and feature rubber feet and side bumpers for added protection.

SinkSense GridLogic Latch-on Bottom Grid Kitchen Sink Organizer in Stainless Steel

GridLogic is an add-on accessory with six individual dish dividers that latches to your existing sink bottom grid to create organization and structure for separating glass, fine china, knives, pots and pans, and more. The vertical grid system maximizes the surface area of your sink by enabling you to safely stack dishes upright and organize your sink's space with easy modification to your GridLogic placement. With GridLogic's secure design, you can ensure your grid organizer is locked in place--yet it is easily removed for cleaning and flexibility.