14 best toilet floor bolts
Toilet floor bolts, also known as closet bolts or toilet flange bolts, are essential components used in the installation of toilets. They play a crucial role in securing the toilet to the bathroom floor and ensuring a watertight seal between the toilet and the waste pipe. Here is what you need to know about toilet floor bolts:
Purpose: Toilet floor bolts are used to anchor the toilet bowl securely to the bathroom floor. They provide stability and prevent the toilet from rocking or shifting when it is in use.
Materials: These bolts are typically made from corrosion-resistant materials such as brass, stainless steel, or zinc-plated steel. The choice of material is important because the bolts are in contact with water and can corrode over time if not made from durable materials.
Design: Toilet floor bolts usually consist of two threaded rods, one for each side of the toilet, with a flanged or flat head at the top. The flange or flat head rests on the floor, and the threaded end extends through the toilet's base.
Installation: Installing toilet floor bolts involves the following steps:
- Position the wax ring or wax seal over the waste pipe flange on the bathroom floor.
- Place the toilet bowl over the wax ring, aligning the holes in the base of the toilet with the threaded ends of the floor bolts.
- Secure the toilet bowl in place by adding washers and nuts to the threaded ends of the bolts.
- Tighten the nuts evenly to create a snug fit, but be careful not to overtighten, as this can crack the toilet or damage the flange.
Wax Ring: In addition to the floor bolts, a wax ring or wax seal is placed between the toilet bowl and the waste pipe flange. This wax ring creates a watertight seal, preventing leaks between the toilet and the drain pipe.
Trimming Excess Bolt Length: After securing the toilet bowl, excess bolt length may extend above the nuts. It's advisable to use a hacksaw or a bolt cutter to trim the excess length to prevent interference with the toilet installation.
Flange Repair: If the toilet flange on the bathroom floor is damaged or deteriorated, it's important to address the issue before installing new floor bolts.A secure and intact flange is crucial for a stable and leak-free toilet installation.
Toilet floor bolts are a critical component of toilet installation, ensuring that the toilet is securely fastened to the floor and that there is a proper seal to prevent water leaks. Proper installation and maintenance of these bolts are essential for the long-term performance of your toilet.
Below you can find our editor's choice of the best toilet floor bolts on the market
Toilet Floor Bolts and Caps Set, Universal Toilet Bowl to Floor Bolts Solid Brass, Including 2 Brass Bolts, 4 Bolt Caps with Nuts/Washers Toilet Bolts Heavy Duty Bolts Closet Bolt Set, Solid Brass
Product description
Floor bolts features:
1.These bolts are made of long-lasting durable brass.
2.One pair bolts with double nuts and washers for toilet upside and bottom.
3.Universal fit for most toilet.
4.Solid brass closet bolt set.
Amazing features of Bolt caps:
1.Easy and simple use kit
2.White / almond plastic finish
3.Round caps
4.Used to cover toilet bolts
5.Mounting piece included
6.Universal easy DIY project, fits most
Package including:
2 * Toilet bolts caps in white color: 3.6 cm/ 1.44 inch height
2 * Toilet bolts caps in almond color: 2.8 cm/1.1 inch height
2 * Brass T-bolts with brass nuts and rubber washers
4 * Transparent retainer washers
4 * Brown retainer washers
- 1.Toilet Floor Bolts: Secures the toilet bowl to floor flange. T-bolts and nuts are made of solid brass.
- 2.Brass plated components: 2 pcs brass T-bolts, 4 brass plated open end nuts, 4 metal washers, 4 rubber washer, plastic washers.
- 3.High quality bolt caps: High quality plastic constructed bolt caps ensure the durability and life span. 2 pairs bolt caps are in 2 different heights: 1.44 inch and 1.1 inch.
- 4.Installs Easily: Easy DIY project. Toilet floor bolts fit most toilet. We offer manual and you can follow the product instruction step by step.
- 5.Package including: 2 pack toilet floor bolts sets with nuts and washers, 4 toilet bolt caps, 4 white retainer washers, 4 brown retainer washers.
User questions & answers
| Question: | What are these made of? Plastic? Ceramic? Metal |
| Answer: | Don't need relay, this switch can be used well under 100 watt. |
DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 2-Set (80156)
Danco
Product description
Danco is one of the largest plumbing repair, replacement, and remodel suppliers in the home improvement industry focused largely on empowering 'Do-It-Yourself' consumers with plumbing solutions that are as practical as they are affordable, giving your home a more fresh appeal and renewed elegance. We provide stylish design-oriented innovative home solutions that are user-friendly to support and encourage customers to tackle home improvement tasks on their own - without the heavy price tag of professional services. These Danco closet bolts will be the final touch as you finish remodeling your bath. These bolts anchor the toilet to the floor once you have set everything in place. They are pure brass and are complete with washers. Order yours today
From the Manufacturer
Danco is one of the largest plumbing repair, replacement and remodel suppliers in the home improvement industry. We are largely focused on empowering Do It Yourself consumers with affordable plumbing products and solutions which create new and refreshing decors for bathrooms and kitchens.
- INCLUDES 2 BOLTS, washers and nuts in the set
- SECURELY FASTENS a toilet bowl to the floor
- DURABLE BRASS CONSTRUCTION provides strength and reliability
- EASY DIY installation to give your bathroom a final touch afte bathroom remodeling. Hardware Included : No
- CLOSET BOLTS DIMENSIONS: 1/4 inch x 2-1/4 inch
User questions & answers
| Question: | why is magnet attract the closet bolts, washers and nuts |
| Answer: | I ordered a second QC 3.0 USB fast charger port and just swapped the quick charger for the regular USB. It's just a standard size, so they all work. |
| Question: | These can be used to hold a toilet seat on |
| Answer: | Plastic or Metal enclosure both ok for this switch. But the thickness of enclosure should less than 10mm. And the depth of enclosure should more than 27mm. Maybe the 125B enclosure is ok for you, the ASIN is B07VNCDSN7 |
| Question: | Where does this thin black rectangular metal piece go (it's pictured underneath the washer |
| Answer: | The terminals of this switch are from left to right: POWER, LOAD, GROUND, which are also marked on the label of the switch, hope to help you. |
| Question: | Are the included nuts metal or plastic? Some of the reviews and an earlier question say plastic, picture shows metal |
| Answer: | This switch is with 30A 12VDC rating, So of course it can be used with 1A, Even 0.1A is also ok. |
Product features
Right Part. Real Savings.
These Danco closet bolts will be the final touch as you finish remodeling your bath. These bolts anchor the toilet to the floor once you have set everything in place. They are pure brass and are complete with washers. Order yours today!
Fluidmaster 7110A-001-P10 Setfast Self-adjusting Toilet Bowl To Floor Bolts, Brass
Fluidmaster
Product description
The Fluid master 7110A Set Fast Adjustable Closet Toilet Bolts are designed to be an easy to install bowl-to-floor bolt set, that eliminates cutting or breaking off. The innovative design allows for a quick twist adjustment, so the toilet bowl bolts either shorten or lengthen for a perfect fit. This closet bolt kit includes all you need to set your toilet fast, including adjustable brass toilet bolts, brass nuts and stainless steel washers. Built to last this design offers a 1 year and durable brass construction for strength and corrosion protection. For the fastest bowl-to-flange installation possible choose Fluid master's Set Fast Toilet Bolts.
- Quickly reset and seal your toilet bowl to flange with adjustable closet toilet bolts
- Easy to install, no cutting or breaking off
- Self-adjusting design, simply screw up or down to fit
- Size 5/16 in. and between 2-1/4 in. - 1-1/2 in. length
- Durable solid brass bolts for a long lifespan
- 1 year
User questions & answers
| Question: | Are these bolts 5/16" or 1/4" in diameter |
| Answer: | 3.5" high, 4" wide, 2" deep |
Product features
Fluidmaster 7110A SetFast Adjustable Closet Toilet Bolts
Toilet Floor Bolts And Caps Set,Stainless Steel Washers And Round Cover Caps Toilet Bolt Kit, White
Product description
Toilet bowl caps to cover up and protect from unsightly, protruding hardware used to secure your toilet to the floor. It comes with two, easy-to-install white caps with bolts, washers and nuts. Made of durable plastic construction that will endure the rigors of everyday use.
Amazing features of Bolt caps:
1.Easy and simple use kit
2.Round caps
3.Used to cover toilet bolts
4.Mounting piece included
5.Universal easy DIY project, fits most
Package including:
2 * Toilet bolts caps in white color: 3.6 cm/ 1.44 inch height
2 * Toilet bolts caps in almond color: 2.8 cm/1.1 inch height
2 *Stainless Steel T-bolts with brass nuts and rubber washers
4 * Transparent retainer washers
4 * Brown retainer washers
- ☛【Package Including】: 2 pack toilet floor bolts sets with nuts and washers, 4 toilet bolt caps, 4 white retainer washers, 4 brown retainer washers.
- ☛【Easy And Simple Use Kit】: Easy DIY project.Secures the toilet bowl to floor flange,good accessory to repair your toilet seat.Toilet floor bolts fit most toilet.
- ☛【Wide Range Of Usages】: suitable for most toilets,new installation, so practical for every home.
- ☛【High Quality】: High quality plastic constructed bolt caps ensure the durability and life span. T-bolts and nuts are made of stainless steel.
- ☛【Universal Toilet Bolt Caps】: They are used to conceal toilet bowl installation fasteners without ugly bolts outside there.We offer manual and you can follow the product instruction step by step.
Toilet Master Jack Lifter Designed to Easily Lift, Move, and Repair Toilets. Easy Bolt and Seal Replacement. for use with a Toilet Snake or Drain and Pipe Cleaners.
The Toilet Master
Product description
The Toilet Master makes lifting, moving and installing all types of toilets a snap. It eliminates heavy lifting which eliminates the risk of injury. Not only does it lift the toilet to allow repairs to the floor, cleaning the drain line or replacement of a wax ring, but the wheeled assembly allows you to easily move the toilet out of the way or even into another room. The Toilet Master Jack works on all commercial type toilets. The Toilet Master Jack reduces leaks or dripping because it tilts the toilet slightly forward... you don't have to sponge out every drop of water! And because of the controlled lowering, lining up the flange bolts which is always tricky is now effortless with The Toilet Master Jack alignment tubes.
- Never lift a toilet again! It lifts it for you.
- Don't put yourself or your employees at risk of injury again!
- It's sanitary and eliminates the water mess. No water can spill over the p-trap
- Toilet is never lowered to the floor. No wax mess to clean up and don't fight, guess, or hope you align the toilet bolts correctly!
User questions & answers
| Question: | How does the jack release the toilet if the toilet is "never lowered to the floor |
| Answer: | U have to lower the jack or pick up the toilet. |
| Question: | Will it work with a skirted toilet |
| Answer: | It will work if the lifting arms can roll in under the bowl. Lifting arms are 9-5/8 inches wide. And 6-1/2 inches high. on some skirted toilet it will not roll in under the bowl. You will have to measure yours. |
| Question: | Can i install larger wheels on the toilet jack |
| Answer: | Yes u can install larger wheels. But if lift arms hit the bowl when rolling Jack in position - simply raise the rear end and scoop the Jack in place under the bowl. No problems |
| Question: | I have 3 of these in service and just purchased a 4th. where can i purchase more plastic bolt tubes. ps awesome tool, can't be without |
| Answer: | I just straws or bic pen tubes. I really dont like the ideal of all the dirty wax all over them touching everything so I use disposable ones. |
Fluidmaster 7111 Universal 3-Inch Bowl to Floor Bolts, Includes 2 Brass Bolts
Fluidmaster
Product description
Fluidmaster 7111 Universal 3-Inch Bowl to Floor Bolts, Includes 2 Brass Bolts
From the Manufacturer
7111 3-Inch Bowl to Floor Bolts. Installs Easily. Fits All Brands.
- Manufactured in China
- Easy to use
- Highly durable
- Installs Easily
- Fits All Brands
- 1 Year
- Installs Easily
User questions & answers
| Question: | What is the thread size? 1/4" or |
| Answer: | I can't recall specifically, but I will say I'd never use plastic, and I don't recall being annoyed by them, so I'm pretty certain they're metal |
| Question: | What diameter are these bolts |
| Answer: | Plastic. |
| Question: | Description says solid brass bolts. are they solid or plated |
| Answer: | No it comes with everything there and fuses but you don’t need a relay |
| Question: | How good is the quality |
| Answer: | 4.1" w X 3.4" h X 1.77" d See photo 4 in description. |
Product features
Fluidmaster 7111 3” Bowl to Floor Bolts
Secures toilet bowl to floor flange. Fluidmaster quality toilet bowl 3-1/2”brass bolts, stainless washers and nuts.
Fluidmaster The Leader In Toilet Repair
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
LASCO 04-3645 Solid Brass 5/6-Inch by 2-1/4-Inch Heavy Duty Bolts with Nuts and Washers Toilet Bolts
LASCO
Product description
LASCO 04-3645 toilet bolts solid brass 5/6-Inch x 2-1/4-Inch heavy duty bolts with nuts and washers. 5/16-Inch x 2-1/4-Inch heavy duty toilet brass bolts, retainer washers, brass washers and nuts, 1/pair.
From the Manufacturer
LASCO 04-3645 toilet bolts solid brass 5/6-Inch x 2-1/4-Inch heavy duty bolts with nuts and washers. 5/16-Inch x 2-1/4-Inch heavy duty toilet brass bolts, retainer washers, brass washers and nuts, 1/pair.
- 5/16 inch x 2-1/4 inch Heavy Duty Toilet Brass Bolts , Retainer Washers, Brass Washers & Nuts,1/Pair, Carded
- Brass, 5/16 Inch X 2-1/4 Inch bolts [HD}
- Nuts and washers
- Secures toilet bowl to floor flange
- Fits most
- The product is manufactured in China
User questions & answers
| Question: | Hi, what are the head dimensions? Can this slide into 220 mm (less than 1") wide seat cover track. Don't understand specified dimensions 1x2x |
| Answer: | These bolts are 5/16's solid brass bolts and adjust from 1 1/2 inches to 2 1/4 inches tall. For more information visit our website Fluidmaster.com/support for videos, troubleshooting tips, email, chat with a technician or call toll free 800-631-2011. We are available 5 days a week Mon-Fri from 5:30 am – 5:00 pm PST. |
| Question: | Are the washers brass? Are the nuts brass? At least one reviewer says they are not |
| Answer: | a look at the picture shows the bolt to look like brass, but the washer and nut appear to be steel. magnets do not attract brass, but do attract steel. if the bolt is being attracted to the magnet, then it would appear that the bolt may not be entirely brass but may have steel or some other metal that a magnet would attract |
| Question: | Are these solid brass bolts and solid brass washers and solid brass nuts? everything solid brass |
| Answer: | no, they hold the toilet to a thing in the floor that holds the toilet to the ground. there are other screws for the seat, but not these. |
| Question: | These appear to be "break-off" bolts for applications that require a shorter bolt. Are they |
| Answer: | Thank you for contacting Danco. The order of these parts is the bolt links into the flange and then the black rubber piece goes on top of the flange to protect the porcelain from hitting the metal of the flange and to help keep the bolt in place without moving. |
PSCCO Toilet Bolts Nuts Washers Set Bowl to Floor Bolts Replacement Parts
Product description
Type :Toilet bolts
Application:For Toilet bowl to floor installation
Material : Iron with brass plated / Solid Brass /304#Stainless steel / Iron with zinc plated
Bolt Size: G1/4 x 3-1/2 inch
Weight: 30 g
Package included:
2pcs 1/4" x 3-1/2" brass bolts
2pcs plastic fixing gaskets
2pcs washers
2pcs nuts
- Bolt size:1/4" x 3-1/2" .Quick and easy installation.
- Durable solid brass toilet bolts are easy to install.
- Application:For Toilet bowl to floor installation.
- This set of bolts is one of the final steps in the toilet installation. Once everything is in place, the bolts anchor the toilet to the floor.
- Package included:2pcs bolts,2pcs washers,2pcs plastic fixing gaskets,2pcs nuts.
Fluidmaster 7530P8 Better Than Wax Waxless Toilet Gasket, 1
Fluidmaster
Product description
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts & hardware. Complete your next project feeling confident that you have chosen the Better Than Wax Toilet Seal.
From the Manufacturer
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts & hardware. Complete your next project feeling confident that you have chosen the Better Than Wax Toilet Seal.
- No wax, no mess and can be repositioned; No-rust brass bolts & hardware
- Plunging won't cause leaks; 10-year warranty
- Fits any flange, any toilet
- No minimum temperature required for installation
- Seals on uneven floors or over tile floors with recessed flanges
User questions & answers
| Question: | Will tis extend for counter sunk holes? I needed two wax rings last time. Will this work to replace height of 2 was rings |
| Answer: | In description it says 1/4" x 31/2' bolts. Hope this helps. |
| Question: | will it work on a drain that is only 2 1/2 opening |
| Answer: | 1/4" |
| Question: | What is the difference between Fluidmaster 7530 and 7530P |
| Answer: | They are solid brass. |
| Question: | for one, but for a 2 pack the price is $31.44. Why is it way more than 3 times |
| Answer: | I found these to be very good quality. Worked perfectly. |
Product features
Better Than Wax
Looking for a superior solution to an old problem? That is why Fluidmaster has introduced the Better Than Wax no leaks, worry-free toilet seal. Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won't cause leaks. Plus, you don't have to worry about getting wax on your hands, floor, and toilet. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts and hardware.
NEXT BY DANCO Zero Cut Bolts | Brass Toilet Mounting Bolts | Toilet Repair | White Bolt Caps | Toilet Bolts Screws (10770)
Danco
Product description
Danco is one of the largest plumbing repair, replacement, and remodel suppliers in the home improvement industry focused largely on empowering 'Do-It-Yourself' consumers with plumbing solutions that are as practical as they are affordable, giving your home a more fresh appeal and renewed elegance. We provide stylish design-oriented innovative home solutions that are user-friendly to support and encourage customers to tackle home improvement tasks on their own - without the heavy price tag of professional services. The Zero Cut Bolts were invented by plumbers in response to consumer research that revealed bolts were one of the biggest problems associated with toilet installation. These bolts solve all these problems and make toilet installation faster and easier. In an ordinary installation, toilet bolts are frequently too long, wobble and are difficult to line up. Zero Cut Bolts solve all of these problems with innovative components that take the hassle and the guesswork out of toilet installation. Zero cutting; Zero tools; Zero problems. Order yours today!
From the Manufacturer
Next by Danco exemplifies a line of state-of-the-art plumbing repair parts that empowers the DIYer and Professional to do more than just solve the problem. Don’t just repair it. Improve it.
- ADJUSTABLE HEIGHT BOLTS WITHOUT CUTTING - extension of up to 3 inches for just the right height with NO CUTTING required and comes with ALIGNMENT bullets that guides you to position toilet with ease. UPPER BOLT screws into doble threaded body while the LOWER BOLT retracts and tightens from below with extender included so bolts work with any toilet
- WORKS FOR ANY TOILET INSTALLATION - if toilet bowl flange is above, below or flush with the floor our Zero Cut toilet mounting bolts can adjust to most situations
- SLIDING ADAPTERS tighten the bolts and attach the low-profile bolt caps
- NO TOOLS OR CUTTING REQUIRED and will not damage or scratch the enamel.
- PACKAGE INCLUDES stainless steel bolts, lock nuts, brass tee bolts, alignment bullets, brass extenders, slide adapters, and low profile caps
User questions & answers
| Question: | I ordered a danco hydrostop 2" flapper and handle replacement kit (flt231). existing ring and assembly does not fit. will this work |
| Answer: | This will fit standard all standard US slotted commode bowl floor rings! The dimensions are for the packaging! It will work! |
| Question: | During installation can I reset the entire wax seal or will it ruin the integrity of the product |
| Answer: | The nut and bolt is brass. The washer is stainless. |
| Question: | I have a flange I'm trying to place a replacement on top of, as it's old and sweated to the drain pipe. Are there dimensions from hole to hole |
| Answer: | The bolts are brass and the washers and nuts are stainless steel! |
| Question: | Will this work with saltillo tiles (uneven mating surface |
| Answer: | YES |
Product features
Alignment Guides
Positioning a toilet properly the first time can be stressful. The blue alignment bullets assist in helping position and guide the toilet with ease.
Stainless Steel Bolts With Brass Extensions
The stainless steel toilet mounting bolts are durable for reliable performance. In addition, they include brass extensions that allow for height adjustment without the need for cutting. The extension can achieve up to 3 inches.
Specialized Low-profile Bolt Caps
When finishing a toilet installation the bolts need to be tightened and hidden. Sliding adapters are included to help properly tighten the bolts with low-profile bolt caps that feature an easy lock-and-release mechanism
NEXT BY DANCO Zero Cut Toilet Mounting Bolts
- Eliminates the hassle of long, hard to cut ordinary toilet bolts
- Mounting bolts have adjustable heights up to 3 inches
- Included are alignment guides, sliding adapters and low-profile bolt caps
- Zero cutting. Zero tools. Zero problems.
LASCO 635249 2-1/4" Solid Brass Bolt 1/4" Acorn Nuts Stainless Steel Washers and Round Cover Caps Toilet Bolt Kit, White
LASCO
Product description
LASCO 04-3639 toilet bolts solid brass 1/4-Inch x 2-1/4-Inch code approved with 1/4-Inch acorn nuts, stainless steel washers and round bolt cover caps Code approved brass closet bolt set, includes 2 each 1/4 x 2-1/4-Inch brass bolts with stainless steel washers, 1/4-Inch acorn nuts, brass hex nuts and round bolt caps, 1/pair.
From the Manufacturer
LASCO 04-3639 toilet bolts solid brass 1/4-Inch x 2-1/4-Inch code approved with 1/4-Inch acorn nuts, stainless steel washers and round bolt cover caps Code approved brass closet bolt set, includes 2 each 1/4 x 2-1/4-Inch brass bolts with stainless steel washers, 1/4-Inch acorn nuts, brass hex nuts and round bolt caps, 1/pair.
- The product is 1/4x2-1/4 Toil Bolt Set
- Easy and simple use kit
- The product is manufactured in China
- Brass plated components
- 1/4-Inch x 2-1/4-Inch bolts
- Nuts and washers
- Secures toilet bowl to floor flange
- Easy DIY project, fits most
LASCO 04-3633 Solid Brass 1/4-Inch by 3-1/2-Inch with Nuts and Washers Toilet Bolts
LASCO
Product description
LASCO 04-3633 toilet bolts solid brass 1/4-Inch x 3-1/2-Inch with nuts and washers 1/4-Inch x 3-1/2-Inch solid brass bolts with retainers, washers, and nuts, 1/pair carded.
From the Manufacturer
LASCO 04-3633 toilet bolts solid brass 1/4-Inch x 3-1/2-Inch with nuts and washers 1/4-Inch x 3-1/2-Inch solid brass bolts with retainers, washers, and nuts, 1/pair carded.
- Includes 2 Each 1/4 Inch X 3-1/2 Inch Brass Bolts
- Secures The Toilet Bowl To Floor Flange
- Retainer Washers
- Brand Name: Lasco
Stinky John's Tall Toilet Bolt Caps: Don't Cut Those Bolts! 100% Made in USA! (Universal Fit, 2 Pack)
Product description
2 Pack - UNIVERSAL
- UNIVERSAL SIZE: Will fit either 1/4 inch or 5/16 inch threaded bolts
- DON'T CUT THOSE BOLTS: Why cut the bolts when you can you can just add a cap? They are paintable to match your toilet
- SCREWS ON, STAYS ON: No more unsightly, loose fitting caps. Quick and easy installation
- 100% MADE IN THE USA with a sleek, patented design
- TALL CAPS to cover those long bolts
User questions & answers
| Question: | Two covers for $10? cut that bolt |
| Answer: | The seal is designed to be the same size as a single piece of wax. Just like wax this system can be double stacked however this kit comes with a spacer that should fill in the necessary gap. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail [email protected] and Toll Free 800-631-2011. |
| Question: | What is the minimum bolt height these will fit as measured from where the bolt comes out of the toilet base |
| Answer: | That is my problem also. Did you ever find something that would work? |
| Question: | how big is the base of diameter that fits around the washer |
| Answer: | There is no difference between those two part numbers. The "P8" is a pack size of 8 units per carton. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail [email protected] and Toll Free 800-631-2011. |
| Question: | How tall is the cap |
| Answer: | Just dont buy from scamers |
American Standard 7381148-200.0200A Bolt Cap Kit, EZ Install Toilets-White
American Standard
Product description
Durable, reliable, quality engineering and construction. American standard products are designed for your busy lifestyle. Parts, hardware and components are engineered to enhance the usage of your american standard products. About american standard brands great performance and great looks meet in our complete line of fixtures and faucets for bath and kitchen. Performance and reliability. Coordinated collections. Ingenious features. American standard is style that works better everyday.
From the Manufacturer
Durable, reliable, quality engineering and construction. American Standard products are designed for your busy lifestyle. Parts, hardware, and components are engineered to enhance the usage of your American Standard products. About American Standard Brands Great performance and great looks meet in our complete line of fixtures and faucets for bath and kitchen. Performance and reliability. Coordinated collections. Ingenious features. American Standard is Style that Works Better everyday.
- Genuine American Standard repair part
- Bolt cap kit, ez install toilets white
- Check your repair part information for compatability
- Used by plumbers to repair American Standard products
User questions & answers
| Question: | What is the correct orientation of the plastic twist nut |
| Answer: | This is to replace the wax ring the toilet sits on. Not for use inside the tank. |
| Question: | Does this screw on |
| Answer: | Thank you for contacting Danco. The Perfect Seal wax ring and be reset multiple times unlike traditional wax rings that leave wax all over and usually can only be set once. |
| Question: | Will this fit a 1 inch screw |
| Answer: | Not too sure but the come shipped with a height extension and the instructions are very clear on the height requirements as to use it, with or without the extension. For us, this has worked when all others, including 2x wax have not been successful. |
| Question: | Will this fit a bolt that is just a little over 1.5 inches |
| Answer: | Yes it will. I have 12X12 sealed saltillo tiles in both baths and I wanted to ugrade the origninal toilets (thats another review). My flange was above tile height by approx 1/4 inch. I completely cleaned the flange, used Peweter colored sanded caulk to conseal a poor tile cut that would have shown on the side of the toilet. Then the Danco Perfect Seal. It has rubber grommets that held the bolts vertical as I centered the toilet. No issues at all, no leaks and V-solid. I only bought the one as a trial, another just arrived for the master bath. Very easy to use, clear concise instructions and if for some reason, you want to pull the toilet, you can do so without disturbing the seal, unlike a traditional wax seal that would be need replacement if the toilet is pulled. |
Latest Reviews
View all
Lg Projectors
- Updated: 05.03.2023
- Read reviews
Concrete Breakers
- Updated: 12.07.2023
- Read reviews
Picnic Table Paint
- Updated: 27.04.2023
- Read reviews
Case Ms
- Updated: 09.01.2023
- Read reviews
Cello Tuners
- Updated: 05.03.2023
- Read reviews