12 best 2x4 shelf bracket

Product description

Make sturdy, good-looking projects that will last with the rtc rigid tie. this series secures two wood members to a vertical post forming a 90 degree corner. these connectors are ideal for the construction of workbenches and storage shelving units. install with sd8x1.25 strong-drive screws or #10 x 1-1/2 in. strong-drive sd screws.

• Rigid tie corner connectors provide a strong 90 degree connection between two 2x2s and a 2x2 post, forming a corner
• No angled cuts or angled fastening that can split the wood
• Stronger than other methods of corner construction
• Made from 18 gauge steel
• Galvanized for extra corrosion resistance

User questions & answers

Question:	I paced an order for these this morning for 23.00, then i got an email that my order got cancelled. I did not cancel this order. why did it cancel
Answer:	Orders can be cancelled by the seller or the buyer. The seller probably could not fulfill the order for some reason.
Question:	can this be mounted to a concrete foundation wall
Answer:	Not easily. I love these ties - simple solution that is sturdy with 4x4 posts. I’m not sure what your set up is but if you were using 3 posts it would work but if you’re mounting to concrete and thinking of removing 2 of the 4x4 - it would not be sturdy
Question:	Is this actually for a 4x4 post
Answer:	Hi Kayla, yes it is for a 4x4 post. We sprayed them black and used them for a fish tank stand and they look great!
Question:	what size lumber does this fit for the sides and corner post
Answer:	I used 4x4 for corner posts and 2x4 for sides. RTC24 takes 2x4 for corner and sides. Simple planning should take care of any project designs. I used 8 - RTC42 for 8 corners. 4 for table top and 4 for shelf about a foot off the ground. 4-4x4 posts for corners. I used 2x4 I had left over from deck projects for sides. To be honest this was overkill for my 2.5ftX8ft work bench. I also added heavy duty wheels to push my bench around in the garage.

• These Best Selling Shoring Beam Cargo Bar Wood Beam End Socket Shelf Brackets Have E Track Spring Fitting Attachments That You Can Insert Into A Slot On Etrack rails or singles and are also compatible with the A-track trailer tie-down system
• Look at the 7th Picture For A Mechanical Sketch that has Detailed Dimensions And Note That These Socket Tiedowns Are Generally Suitable For Use With Standard 2x4s (despite their listed width of 1.91”). The 2 bolting holes have diameters of 1/4". This Reliable E Track Beam Socket Tie Down Accessory Is Made Out Of Hardy Steel That Is Zinc-Coated For Superior Resistance to Corrosion and Rust.
• Just screw 2" x 4" Wooden Beams into These Heavy Duty Wood Beam End Sockets; Then Take Advantage Of The Versatility And Universal Use Of The E Track Tie-Down System – press the spring lever and clip the bracket into an E-track slot. If you attach one of these sockets to each end of the beam, you’ll have created your own Removable Cargo Bar Load Lock that ties down boxes, appliances, and other freight loads during transit and unloading
• With These Top-Quality E-Track Wood Beam Sockets, You Can Easily Build Handmade Cargo Tiedown Systems For Your Vehicle - Support Plywood To Create Multiple Cargo Levels, Bunkbeds, And Custom Cabinets And Shelves
• Everything You Need in Etrack brackets – Top-quality, dependable and versatile.

User questions & answers

Question:	Does this come with the slotted track or just the socket brackets
Answer:	This products is the 2x4 brackets. The e-track rail can be purchased separately. Please let me know if you have any other questions. Chaya DC Cargo Mall 866-998-0577
Question:	If i make a shelf out of this will this hold alot of weight
Answer:	Hi, This e-track shelf bracket is extremely sturdy. Since it's stronger then any wood it can be used with, there is no need for a working load limit. Let me know if there's anything more I can do for you. Chaya Roth 1866-998-0577
Question:	Can these be used on the floor also
Answer:	Hi Edward, Sure. These brackets will clip into any E track - on the floor, walls, or ceiling. I'd love to hear what you want to use them for; we love customer ideas! Let me know if there is anything more we can do for you. Here for you, Basya DC Cargo Mall 866.998.0577
Question:	Are these American made
Answer:	no

Product features

DC Cargo Mall E-Track System

That’s because it’s reliable and easy to use. Just snap a strap or load bar into an E-Track rail and the cargo is secure for the long haul!

But it’s not just for hauling anymore!

Recently, E-Track has also become the go-to organization system for trailers, trucks, garages, barns, and sheds.

Industrial-grade rails + accessories = a complete system

Looking for an all-in-one system to organize your landscaping tools? Need a way to store your camping stuff? E-Track rails provide rows of strong anchor slots. And accessories click into those slots to keep tools and equipment safe and organized.

Product description

A+Selected 30 PCS black angle bracket serve more as structural supports to strengthen corner joints against compressive failure.

Specially designed with L shape, is an important fastener to make furniture parts stay firm.



Angle Brackets Specifications:

Size: 50 x 50 x 17 mm (L x H x W) / 1.96 x 1.96 x 0.67 inch

Material: Cast Iron

Thickness: 2MM/0.08 INCH

Color: Black

Appearance: Smooth Surface and Arc Design

Number of Holes: 4 Holes

Package: 30 PCS Right Angle Braces

Note: Screws are not include

Applications: Furniture Fixation, Perfect For Fastening Chair, Table, Window, Furniture, Dresser, Shelf And Drawer



Angle Brackets Features:

-90 Degree angle braces, widely be used in furniture and hardware accessories

-Made of high quality Cast Iron, durable and anti-rust

- Once stamping forming and 2MM thickened steel plate, long service life

-Countersunk screw holes design, aesthetic appearance and easy to install

- With arc design, it won’t hurt your hand and it will be safer to use

- As a corner connecter, perfect for fastening shelves, furniture and cabinet

• 【Premium Material】Black l bracket made of Cast Iron with exquisite technology, durable and rust proof; Smooth surface and edges without burrs
• 【Corner Bracket Size】50 x 50 x 17 mm (L x H x W) / 1.96 x 1.96 x 0.67 inch; Tickness:2 mm/0.08 inch； Hole Quantity: 4 holes; Hole diameter: 5 mm/ 0.19 inch
• 【Wide Applications】The right angle brackets can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc
• 【Countersunk Screw】Screw holes are countersunk design; The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance
• 【Package Include】30 Pcs Stainless Steel L Bracket, meet your daily requirements to make furniture parts stay firm; Note: screws are not include;

Product description

North American County Homes has been a leading supplier of authentic, antique, vintage, and industrial home furnishings and accessories since the 1980s. Over the years, our catalog has expanded to provide offerings for more than 3,000 products from all corners of the world.



These Borris Cast Iron shelf mounting brackets will bring an elegant tough of style to any home. Offered in sizes from small to large, in black, you will be able to easily find the perfect style for any room in or outside of your house. And with pre-drilled holes, the metal floating shelf brackets are easy to hang, the only hard part is finding the studs. The solid and sturdy cast iron construction means these brackets are built to last. And they’re tough enough to be used outdoors as well. Unique shelfing set ups can be created by purchasing more than one set of brackets to create wall mount shelf set up like you’ve only dreamed of.



We are very product of our products and we love them very much. We can only hope you love them as much as we do. If you have any questions or comments on how we can be better, please feel free to contact the team at NACH at [email protected].

From the Manufacturer

These versatile shelf brackets are perfect for indoors or outdoors, home or work spaces. These shelf brackets are ideal for creating more storage or display space, to create a wall-shelf, to customize your own bookshelf, commodity-shelf or storage rack. For longer shelves simply use more brackets for extra support. We at NACH are proud of our products and want you to love them as much as we do! If you have any questions or comments on how we can be better, please feel free to contact the team at NACH at [email protected].

• Full Measurements & Color Selection: Small 3.54 x 2.75 x 1.77 Inches, Black; Pre drilled holes makes for easy installation
• Solid & Sturdy – Manufactured with heavy duty, weighted cast iron, these rustic shelf brackets are made to last, and are guaranteed to withstand the test of time
• Universal Use – NACH Industrial shelf mounting brackets with are functional and sophisticated enough for indoor use while also being tough and durable enough for outdoors use without wear or corrosion
• decorative & Functional – An antique floating shelf is something to be admired, especially with this historic, industrial look; Great for showcasing books, candles, clocks, and other home furnishings
• Original Quality Guaranteed by NACH - At North American Country Home, we are proud of our authentic American products and we want you to love them as much as we do! We love hearing from you, please let our team know how your experience was or if you have any questions about your order

User questions & answers

Question:	What would the maximum width of board that can be used with the 4.3 brackets? Most appreciated
Answer:	The lengths of the two sides are 2-7/8" and 3-5/8", but of course you could always use wider boards if they are securely attached
Question:	What is the spacing of the holes for the screws? I want to mount to studs and am wondering if the two holes will miss the stud
Answer:	The two top holes are 1 inch apart. The top hole to the bottom hole on an angle is 1.5 inches. I was able to mount into the studs with no problem. Hope this helps.
Question:	What size (Diameter) screws does this bracket accept
Answer:	Hello J.Prachyl,Thank you for your interest in our product, the screw that we normally send with the bracket is 0.7mm in diameter however a standard Flathead #6 x 1 1/4 size screw will fit nicely as well. The length of the screw will vary by the type of wall you have (drywall, natural wood, ect).I hope this was helpful, happy decorating!Giulia @ NACH
Question:	Only receive one. How do I get the other one
Answer:	Okay

Product features

Use Indoors or Outdoors

Classical shelf mounting brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoors use without wear or corrosion. Painted in classic black.

Easy Installation

The brackets come predrilled with 4 holes and are already painted for a nice semi-formal look. They can be used indoors or outdoors. Perfect for mounting mailboxes and birdhouses outdoors and for books, candles, spices and more indoors.

Cast Iron

Sturdy construction makes these brackets a good choice for heavy loads while not being too bulky

Pre-Drilled

The iron brackets come predrilled with 4 holes, so as soon as they arrive, they will be very easy to mount with the appropriate screws for your mounting surface

Old World Charm

Bring the Old World Charm into your home, all our product are inspired by classic vintage products of the past

Product description

Simpson Strong Tie WBSK Workbench and Shelving Hardware Kit

• Instruction sheet that includes lumber cut list
• DIY Done Right booklet that offers inspiration and instruction to build other home projects with Simpson Strong-Tie products
• 8 Rigid Tie RTC2Z connectors
• 4 #6 x 2 1/2" flat-head screws
• 1 Box of Simpson Strong-Tie SD #8 x 1 1/4" screws and 20 #6 1-1/4-inch flat head screws, Made in USA

User questions & answers

Question:	Does it come with the peg board
Answer:	No. Adding peg board will be easy with this kit. Simply cut the a pair of the legs to the high/width of your bench/peg board design.
Question:	Can this be made up to 8ft wide
Answer:	Yes, I made my bench 8’x30”x40”. It’s real sturdy!
Question:	I will be putting this in a garage with 2 cars, at times with rain snow and ice on the cars the floor gets wet. How can I protect the legs from water
Answer:	(1) Set each leg on a brick or other some other material that repels or is not damaged by water. (2) Use pressure treated wood. (3) Move South.
Question:	Can i use 4x4 for the legs
Answer:	This is not so simple a question to answer yes or no. This kit was designed to be used with standard 2X4 lumber as the legs are meant to go through the corner bracket and there is not enough space to accept a 4X4. It would take more than a basic knowledge of woodworking to manipulate a 4X4 or to add additional bracing to stabilize a 4X4 as the brackets simply cannot offer enough support on their own since the 4X4 cannot go through the bracket. Either of these methods I do not recommend as it is not the intended use of the product, and only you know your skill and comfort level with this matter. However, I do see one simple method of beefing up the legs. Build the project by the instructions with 2X4's and then attach another length of 2X4 to the inside of the legs, under the bracket. This doesn't really add much support to the project as you are just adding material to the legs instead of incorporating it into the structure. This is mostly cosmetic if you simply like the look of the 4X4. I hope this helps. Please feel free to contact me if you have further questions.

Product description

Black Steel L Corner Brackets Features:

-Made of heavy duty cast iron, strong loading capacity and rust resistant

-Easy to install; The L brackets only need to be screwed on

-Ideal for quickly and easily repairing wood furniture

-Connecting furniture joint corner board and reducing the noise of shaking

-DIY your furniture, such as bookshelf, cabinet, table, wardrobe, chair desk

-Widely used in the home, hotel, restaurant, workshop, storage room, factory areas and so on

Package include:

20 x L Corner Brace

140 x Screws

Specification of L bracket:

Size: 2"L x 2"H (50MMx50MM)

Metal wide: 0.8" 

Thickness: 0.12”

Material: Iron

Color: Black

Support Weight: Maximum 35lb for a pair of corner bracket 

Wide Application of L Angle Bracket: Join a wooden shelf to a wall or to join two furniture parts together such as bookshelf, garden shelf, closet, garden shelf and so on. 

• 20 PCS HEAVY DUTY L CORNER BRACE: This black corner brace is made of heavy duty steel and could maximum support weight of 35lb for a pair of this L bracket. Our corner brackets come with a L pattern and could work perfectly for installing shelves, furniture and wall shelves, and so on.
• Black Steel L Brackets Sizes: 2" L x 2" H(50mmx50mm), Metal Size: 0.8" Wide x 0.12" Thick, Hole Quality:4, Hole Dia: 0.18”/4.5MM
• ROUND CORNER AND COUNTERSUNK HOLE DESIGN: Our corner brackets for shelves has round ends and countersunk allow l bracket to be flat after screw are installed, with no protrusions to cause scratches.
• EASY TO INSTALL: Even if you are not good at DIY, it is easy to install. The package includes the stainless steel screws. You just need to make sure that the corner brace brackets are perpendicular to the furniture.
• WIDE APPLICATION: The small solid and strong L corner braces can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc.

User questions & answers

Question:	Can they be used upside down, so the piece screwed into wall is above the shelf
Answer:	Not true! I have pictures of this product and it is not a perfect 90° angle. I don't have the ability to post the picture here but they have a slight angle so when hanging the brackets so the metal attached to the wall is above the shelf instead of below the shelf the board angles down towards the floor.
Question:	does a magnet stick to this metal
Answer:	Yes, the magnet can stick to this metal.
Question:	Do you have the same design as this one except without the lip
Answer:	Our brackets all without the lip
Question:	Listing says they're rated for 75 lb load, but one of the photos says 110 lbs. Which is it? And is that per bracket or pair? Drywall or stud framing
Answer:	Thank you for your reminder. One pair of brackets are rated for 110 lb load, they can suit for drywall or stud framing.

Product description

The Hopkins 90118 2x4basics ShelfLinks Custom Storage System offers an easy fix to custom shelving. All the hardware is included, just add the size lumber you want (lumber not included). Ideal for the garage, and shed, the Shelf Links Custom Storage is durable and sturdy giving you the ability to easily organize your items onto storage shelving.

Offering configurations and dimensions that other do-it-yourself shelving kits simply cannot match, the 2x4basics ShelfLinks system helps you create shelving units that suit your needs--you just add the lumber. Designed to fit anywhere nd hold practically anything, ShelfLinks shelves can be modified or expanded as your storage requirements change.

Simple assembly with only a powered screwdriver and a saw. View larger.

2x4basics ShelfLinks At a Glance Creates a customized storage system Heavy-gauge structural resin construction Supports spans up to 8 feet and holds up to 1,000 pounds Easy assembly--requires only a powered screwdriver and saw Lifetime warranty

Easy-to-Assemble, Customizable Shelving System

ShelfLinks allow you to build strong, custom-sized shelves by just adding 2x4 lumber (not included). Construct a great-looking entertainment center on the cheap or quickly put up shelving in your dorm room or garage. Anywhere you need a custom shelving solution, ShelfLinks make it happen in a fast, affordable way and provide a great alternative to flimsy, one-size-only plastic and metal shelving units.

Featuring easy-to-follow assembly instructions, ShelfLinks are as simple to put together as building blocks. First, cut your 2x4s to the length you choose. Next, attach four 2x4s to the top of the ShelfLinks to make your storage surface(s). You then insert four more 2x4s through the patented apertures to make the legs of your shelf unit. Secure all with the included screws. It's that simple! The only tools required are a powered screwdriver and saw. And you won't have to worry about miters or angles--only straight, 90-degree cuts are required.

Strong, Durable Construction Holds up to 1,000 Pounds

ShelfLinks are built to last. They're constructed of heavy-gauge structural resin--once joined with 2x4s, each shelf can support spans up to 8.0 feet (2.4 meters) and can hold up to 1,000 pounds (400 kilograms). Finished shelf depth is 16 inches (40 centimeters)--plenty of room to safely house a host of items, from school books and DVD collections to tools and construction materials.

This kit is backed by a lifetime warranty.

What's in the Box

Six ShelfLinks, each measuring 5.0 x 3.0 x 15.5 inches (WxHxL); screws; assembly instructions; and warranty information.

Construct a great-looking entertainment center on the cheap (shown in black). View larger.

Quickly put up shelving in your garage (shown in black). View larger.

Store records and games in your basement or attic. View larger.

Get the most out of your closet space. View larger.

From the Manufacturer

ShelfLinks allow you to build strong, custom-sized shelves by just adding 2x4 lumber (not included). Construct a great-looking entertainment center on the cheap or quickly put up shelving in your dorm room or garage. Anywhere you need a custom shelving solution, ShelfLinks make it happen in a fast, affordable way and provide a great alternative to flimsy, one-size-only plastic and metal shelving units. Featuring easy-to-follow assembly instructions, ShelfLinks are as simple to put together as building blocks. First, cut your 2x4s to the length you choose. Next, attach four 2x4s to the top of the ShelfLinks to make your storage surface(s). You then insert four more 2x4s through the patented apertures to make the legs of your shelf unit. Secure all with the included screws. It's that simple! The only tools required are a powered screwdriver and saw. And you won't have to worry about miters or angles--only straight, 90-degree cuts are required.

• Lumber not included with each kit
• Customizable shelving, can be modified or expanded as storage requirements change
• 16" deep shelves made of heavy gauge structural resin
• All hardware is included, assemble with only a screwdriver
• Only straight 90 degree cuts, no miter or angle cuts necessary

User questions & answers

Question:	Can these shelf links be painted
Answer:	I don’t see any reason why they couldn’t be painted. They are made of plastic so with the right type paint it shouldn’t be a problem.
Question:	Can I use 2 by
Answer:	The pieces are designed for 2 x 4's for both the legs and shelf pieces. You could use 2 x 6 for the shelves but they would have to be notched around the legs. 2 x 6 could not be used for the legs because these ShelfLinks can slide up and down the legs so you can place the intermediate shelves at any location.
Question:	How do I secure the cross boards to the top of the ShelfLinks. 1.) Are there screw holes already pre-drilled in the top of the ShelfLinks? OR: 2.) Do I drill pre-drill my own holes? OR: 3.) Will I be able to drill straight through the wood into the top of the shelf link securing the boards
Answer:	1) YES 2)NO 3) YES, but I just screwed directly from the bottom of shelflinks into the 2x4s, not from the top. I just put the wood on the floor and laid the shelflink on top of 2x4s and marked on the wood and drilled the screws without predrilling. The Home Depots cheapest 2x4 I used were soft enough so there was no need to drill a hole first. Used a portable drill with a screw head.
Question:	Do the legs go all the way through the brackets to build taller shelves or are they individual lengths stacked on each bracket
Answer:	When you build the shelves the legs are one long 2 X 4. So as long or tall as you want the shelves that is how long the 2 X 4 should be. I just used the standard 8' 2 X 4. The top shelf is the one in the picture. That shelf covers up the whole bracket.

Product features

Customizable Diy Storage, Organization And Outdoor Furniture

Our 2x4 Basics brackets have been designed to make garage organization and outdoor furniture projects as simple as possible. Only 90° cuts are required, no miters or angles, and projects can be built to any length up to eight feet. To simplify the process even more, only 2x4 lumber is needed for most projects.

Garage Organization

Outdoor Furniture

Outdoor Storage

Product description

[WHAT IF I DON’T LIKE]:If you have any quality problems with the products you received, or if you think the product is inconsistent with our description, please feel free to contact us.

we will provide you with an unconditional refund or exchange,you do not need to bear any losses. Please rest assured to buy.

[Features]: The Folding shelf brackets can be installed in kitchens, restaurants, rooms, shops, workshops, boats, RVs, backyards, trailers, balconies, bathrooms, garages,

and can also be used to make TV stands, bookcase, folding stools, work benches, air conditioning frames, Booths, garden frames, laminated brackets, etc.

[Product Name]: Folding bracket

[Material]: Stainless steel

[Surface treatment]: brushed

[Installation method]: screw fixing

[Dimensions]:as shown in Figure L-18inches (450mm) H-6.7inches (175mm) W-1inches (25mm)

[Maximum load capacity]: 330lb / 150kg

[Weight]: 1.2kg / 2.65lbs.

[Color]: silver gray

[Packing]: boxed

[Package Contents]:

Bracket* 2

M4-16 screw* 8

M5-40 screw* 6

M8-40 expansion tube* 6

[WARM REMINDER]：

Product does not include wood

The installation location should be horizontal. Make sure the two brackets are parallel to each other and perpendicular to the wall, otherwise the folding will be affected. Tighten the screws to avoid loosening.

During use, the load-bearing limits of the bracket, the strength of the wall and the thickness of the panel should be considered to avoid overloading the bracket and damage to the wall or panel.

Please keep dry and clean,Long-term humidity will shorten the service life

• ★Full Range of Models &Powelful Support: Models include 8"/10"/12"/14"/16"/18"/20"/22"/24" foldable shelf brackets to meet different size requirements. Max Load: 330 lbs / 150 kg. The need to increase the load capacity can increase the number of hinge in the interval.
• ★How to Choose the Size: It is recommended to match the depth of the partition with the length of the bracket to ensure the maximum carrying capacity. The protruding depth of the partition will increase the torque of the support arm. As the torque increases, the carrying capacity will decrease (leverage principle).
• ★Space Saving: The folding bracket can be locked at 90 degrees. When not in use, you can fold the table to save space. You can use it to extend the folding workbench in garages, laundry rooms, kitchens, garages, boats, yachts, front desks, backyards, RVs, barbecue grills, trailers, bedrooms, balconies, bathrooms, etc.
• ★ Easy to Install: Even if you are not good at DIY, it is easy to install. The package includes the appropriate mounting accessories, high quality stainless steel screws and Expansion anchor. You just need to make sure that the two bracket are parallel to each other and perpendicular to the wall.
• ★Rugged&Durable: The shelf bracekt Made of high quality stainless steel with good corrosion resistance and rust resistance. No coating, no paint, easy to clean, wire drawing process, can prevent daily scratches, and keep bright as new

User questions & answers

Question:	Is the max load 330 lb. per bracket or pair of brackets
Answer:	I,ve used these brackets in two locations. I'd have to say per pair.
Question:	could you use this as a seat in an entry way to put on shoes?could you use this as a seat in an entry way to put on shoes
Answer:	You can use it to make a folding wall stool, and you can sit down and change shoes when you go out to change shoes.
Question:	shelf dimensions
Answer:	These are only the brackets! the shelf I put up was 12 by 23 the 12 inch brackets They are very heavy duty brackets easy to install!!!
Question:	Do these brackets have long release handles that extend to the outer end of the bracket for easy access
Answer:	Yes release does extend to the outer end of the bracket. Easy to release. Very sturdy brackets

Product description

This listing is for EIGHT beam socket attachments. Beam sockets are designed to attach to "E" track via a spring clip. They are used with "E" track to make repositionable shelving, an overhead loft, bunk beds etc. Once the beam socket is attached to the "E" track you would mount a board inside the slot (designed for 2" X 4" or 2" X 6" boards). The beam sockets are zinc plated to inhibit rust and corrosion.

• This listing is for EIGHT heavy duty beam socket attachments. Model #1845 by Kinedyne Corp., a leader in the cargo control industry.
• Beam sockets are designed to attach to E track via a finger actuated spring clip.
• They are used with both horizontal and vertical E track to create repositionable shelving, an overhead loft, bunk beds etc. Once the beam socket is attached to the E track you would mount a board inside the slot (designed for a 2 x 4 or 2 x 6 boards) allowing you to create a multitude of configurations and designs.
• The steel beam sockets are zinc plated to inhibit rust and corrosion.
• The beam socket measures 4-1/4" high x 3-3/8" long x 1-7/8" wide.

User questions & answers

Question:	How much weight will these brackets support
Answer:	I’m not 100% sure. I used them in ove of our trucks to support a 2x4 of wood... using it to support very little weight but seem like the brackets can support decent weight.
Question:	What is the diameter of the screw hole on the side
Answer:	Hole is 1/4", slot is 1/4" x 3/4" thank you! Robin and Paul, R and P Carriages

Product description

STARVAST 12 inch Shelf Bracket Black Heavy Duty Metal L Corner Shelf Bracket Triangle Wall Mount Shelf Bracket for DIY Home Improvements



Features:

Metal Shelf Brackets made of heavy duty steel. No Rust & Durable.

The bracket is designed by triangle shape, which is the sturdiest construction



Specifications:

Material: Steel

Color: black

Thickness: 2mm / 0.08inch

Hole Dia: 5mm / 0.2inch

Size: 300 x 19cm / 12 x 7.5nch

Installation Method: Screw fixing (Screws are included)

Max. Load: Approx. 30KG/66Lbs



Package Includes:

4 x Brackets

8 X Long Screws

8 X Plastic Anchors

12 X Short Screws

• PACKAGE INCLUDED - Come with 4 packs black 12 x 7.5 inch heavy duty shelf brackets. ( 300 x 190 x 15.4mm / L x W x H ) , thickness – 2mm
• MATERIAL - Triangle shelf bracket is made of high quality steel with bright black finish. It is waterproof, rustproof, so ensure durable and long last
• TRIANGULAR DESIGN - Wall shelf brackets are designed by triangular structure, provide good stability. Maximum load is 30kg / 66lb per pair.
• APPIICATIONS - The utility shelf brackets usually were used as bookshelf, exhibition stand, external wall brackets, garden shelves in the garages, basements, storage rooms, stores, offices and factories
• EASY INSTALLATION - Equipped with mounting accessories, include stainless steel screws and anchors. There are four holes on the top of the bracket for install the screws easily

User questions & answers

Question:	How long are the long and short screws
Answer:	I used my own heavier duty screws and mounted directly to studs.
Question:	What is the screw size
Answer:	.6 inch 1.15 inch
Question:	How wide is the bracket when viewed head on (the width of the metal that contacts the shelf and the wall
Answer:	Not surei say 3/4 but not as heavy duty as i wanted
Question:	What size shelves will this work with
Answer:	I used 1" x 12" boards for shelving

Product description

This wall shelf bracket combined with practical and beautiful. Apply on a variety of wood shelving included Kitchen shelf, bathroom shelf, bedroom shelf, bookshelf, and tool shelf. Handcrafted and forged brackets. Widely use in Bedroom, Livingroom, Kitchen, Office for expanding the space to storage or display. Great accessories for your DIY shelving project.

• Package Content: 4pcs L-shaped Brackets, 16pcs Screws, and 8pcs Expansion Tubes. Wood boards and other props are not included in this set.
• Premium Quality: Handcrafted and forged brackets are durable and sturdy. Guaranteed enough bearing for holding normal wall mounted wooden shelf for daily use. Widely use in Bedroom, Livingroom, Kitchen, Office for expanding the space to storage or display.
• Modern Design: Rustic style fits into many home decor, adds retro industrial sense for your home style. Apply this on a variety of wood shelving included Kitchen shelf, bathroom shelf, bedroom shelf, bookshelf, and tool shelf.
• Material: Iron. Solid metal stand with matte black finish can be paired with a variety of boards. It is an essential accessory for your DIY project, that you will get an perfect and heavy duty storage rack.
• Size: 4"(H)×6"(L), the thickness is 4mm. Fits for less than 6.5" wood plank, Mkono is a registered trademark and our product is professional manufacturing and sole selling.

User questions & answers

Question:	The description says it fits “less than a 6” board.” Does that mean I could not use a 2” x 6” shelf for these brackets
Answer:	Yes, you can use a 2” x 6”. If you go to the store would will find that 6” board is never truly measured at 6” - it is actually 5.5”. 🤷🏽‍♀️ I’ve learned that it is cut to 6”, but then planed to 5.5”. This goes for ALL wood measurements.
Question:	Will a 6" glass shelf fit on this bracket
Answer:	It would fit but barely. I don't think it would lay flat. Its about 1/8th of an inch too short to lay flat.
Question:	What is the distance, on center, and diameter of the bolt holes
Answer:	Unable to answer the question as I am not at the same location as the brackets at the moment. I am in England and the brackets are in Jamaica. Sorry I couldn’t help.
Question:	What is the weight that these can handle
Answer:	I’m not sure the exact weight limit but they’re pretty sturdy. I would say 50lb for sure. Probably more. They’re very strong and nice.

Product description

Specification:

●Color: Matte Black

●Material:High quality steel

●Thickness: 5mm

●Application: Clothes hanger, Storage rack, Shoe rack,bookshelf and more



FITS COMMON LUMBER BOARDS: This open shelf bracket set is designed to perfectly fit standard sized 1" x 12" and 2" x 12" lumber boards.



Package Included: 4 x Shelf Brackets(Wood plank is Not included)

16 x Screws



Support Weight :maximum 100lb for a pair of corner bracket

Wide Application of L Angle Bracket: join a wooden shelf to a wall or to join two furniture parts together such as bookshelf, garden shelf, closet, garden shelf and so on.



Warranty: 90 days no question asking refund or replacement of the L bracket.

• Support Weight :maximum 100lb for a pair of corner bracket FITS COMMON LUMBER BOARDS: This open shelf bracket set is designed to perfectly fit standard sized 1" x 12" and 2" x 12" lumber boards.
• Package included: 4 x Brackets , 8 x long Screws, 8 x short Screws,(Wood plank is Not included) PERFECT DIY SHELVING: Our floating shelf brackets come with 4 brackets for your wall mounted shelves.
• 4-PACK MULTI-PURPOSE RUSTIC SHELF BRACKETS: Maximize space with with style. Ideal for the kitchen, bathroom, bedroom, office & more.
• HEAVY DUTY - 5mm thick, this steel shelf bracket is durable and made to last a lifetime.
• we provide 90-days return guaranteed,if u meet any question,please tell us,we want help u solve it asap.

User questions & answers

Question:	Diameter of holes? Buying screws myself
Answer:	the shelves come with screws
Question:	How long are the screws that come with it
Answer:	4x50mm,4x16mm
Question:	How many pounds does one bracket hold? It only lists for a pair
Answer:	30 LB