11 best trademark locks and keys

Product description

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker Made in USA. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation. Designed for high performance and high flow rate. Heavy-duty fuel transfer pump has dual-voltage capabilities. Explosion-proof motor with ball bearings and thermal overload protection.  Features integral check valve and strainer. Provides safe, efficient transfer of diesel fuel only.

• Iron rotor with carbon rotary vanes
• UL/ULC Rating
• Two Year Warranty

User questions & answers

Question:	Will the 900 series meter work with a Tecalemit Wonderbox fuel management system
Answer:	Yes
Question:	is this the same pump as the FR319VB but without the meter
Answer:	There are some from other companies but they are about $100. You can make some simple hangars out of 1/2 galvanized pipe.
Question:	does this come with the suction tube
Answer:	There are no attachments that come with the rack for storage. I made some out of 1/2" galvanized pipe to hold olympic plates on the back. Works as a great counter weight when using the pull up bar for kipping / or ring rows ( once you attach rings to the rig).
Question:	Can the suction hose be rubber and 25' long
Answer:	Back Supports/Unracking bar for squats

Product features

Rotary Vane

Rotary vane technology is a positive displacement (fixed volume) pump design that utilizes an offset rotor with sliding vanes that rotates on a motor shaft inside the pump. The vanes move outward against the pump cavity to form individual chambers (positive displacement). Fuel enters into the pump cavity through the inlet port on the rotor side where the vanes are fully extended. As the rotor turns, the vanes collapse inward creating the pressure that forces the fuel into the discharge port and through the hose.

Advantages of rotary vane technology…..

• Increased suction lift
• No performance loss due to vane wear
• Self-priming ability
• Easy maintenance
• Consistent performance

Suction Lift

The maximum suction lift rating refers to the maximum vertical distance that a pump can lift fuel out of a tank. On rotary vane pumps, suction lift is created due to the offset of the rotor in the pump cavity, which increases the volume in the chamber between the vanes, thus lowering the pressure on the pump’s inlet. Atmospheric pressure, which is now greater than the inlet pressure in the pump, moves the fuel from the tank to the pump cavity (self-priming).

Suction lift is determined by the pump specifications, the type of fuel, and the altitude of the location where the pump is installed. Higher altitudes reduce the suction lift of a pump due to the reduced atmospheric pressure.

To achieve maximum suction lift, the inlet plumbing should be as straight as possible with no elbows or bends in the line. Accessories, such as filters, should not be installed on the inlet side of the pump. Valves should be set with minimum spring pressure and must contain a pressure relief valve.

Discharge Pressure

Discharge pressure refers to the systems pressure while dispensing. It effects flow-rate based on the pump’s design - the lower the discharge pressure, the higher the flow-rate.

Variables that increase discharge pressure/decrease flow-rate:

• Adding accessories (filters, measuring devices, swivels, etc…)
• Changing accessories (increasing the length or decreasing diameter of hose)
• Dispensing fuel above the pump (the higher the discharge point is above the pump the lower flow-rate)
• Pumping higher viscosity fluids (Fill-Rite pumps are designed to pump at a viscosity no greater than kerosene)

To lower discharge pressure/increase flow-rate, remove or limit restrictions. Examples include, moving from a 10 micron filter to 30 micron filter, changing from a 800 series to a 900 series or TT10 series, limiting the use of elbows in system design, or increasing the diameter of your discharge hose/pipe.

300KTF7794

Primary overhaul kit for the 300 series pumps.

KIT300JC

Junction box cover kit for 300 series pumps.

KIT300BD

Bio-diesel conversion kit for 300 series pumps.

KIT300MA

Meter assembly kit for connecting the 900 mechanical & 900 digital meters to 300 series pumps.

Digital Meters With Cutting Edge Technology

Fill-Rite's 900 series digital meters combine the accuracy of a nutating disc meter with an intrinsically safe barrier to create the perfect meter pulser combination for linking to your fuel transfer pump to your fuel management system.

Handling flow rates from 6 to 40 GPM at +/- 1.25% accuracy, this product will operate at working pressures of up to 50 PSI and in temperatures from -15 F to 176 F. It is available with either a 1" or 1.5" inlet/outlet. Meaurements are in English, metric, or user defined units. Compatible with gasoline, diesel, kerosene, mineral spirits, solvents, and heptanes.

Product description

15th Rockabilly Rave anniversary DVD!

Big Sandy & The Fly-Rite Trio performing hit album 'On The Go', & Austin Texas' The Bellfuries performing hits from their debut and sell-out album ''Just Plain Lonesome''.

Product description

The NEW i1Studio from X-Rite is the extraordinarily precise all-in-one color management solution for Color Perfectionists who shoot, scan, edit, display and print! Your prints will match your display more perfectly than you ever thought possible.

• Color Checker camera calibration software and Mini color Checker classic target for cameras
• Monitor and projector calibration and profiling
• Color and B&W printer profiles
• Scanner profiling
• IOS mobile device calibration with color true must have administrator rights to install and uninstall the application

User questions & answers

Question:	Can i install the X-Rite i1studio software along with the software for wacom's color manager eodis3-dcwa, win10, or should i only install one of them
Answer:	The 900CDP will work with any fuel management system capable of receiving a 10:1 pulse output. If Tecalemit Wonderbox can then it will work.
Question:	Hi, will it be suitable for Xerox C75 printing machine
Answer:	No this is a FR300 Series pump with arctic duty accessories. These accessories are rated to -40 F/C. If you want the FR319VB without the meter you would want a FR310VB
Question:	Can the x1 studio match the monitor display with printer output? if so, how? xrite support videos only show this workflow with the x1 pro
Answer:	No, this does not come with the suction tube. You can use any pipe that is 1-1/4".
Question:	What about all the files i have already made before x-rite; will i have to do them over again
Answer:	Yes, it can be rubber and that long, but remember the suction lift is only 18’.

Product description

Super heavy duty ( single lock weights up to 2.5LB) top security padlock,ideal choice for roller shutters, shipping container, warehouses, garages, lorries etc

Rectangle type horizontal-beam steel padlock

Material: Hardened solid steel

Net Weight : 2.5lb

Body thickness 30mm,

shackle diameter: 13mm

Rotating shackle/closed shackle

Come with 5 keys

Package

Top Security Padlock x 1

Key x 5

• Material: Hardened solid steel
• Body thickness 30mm
• Shackle diameter: 13mm
• Rotating shackle/closed shackle

User questions & answers

Question:	Does this lock fit inside a container lockbox
Answer:	It does not! And that what I bought them for. I have 4 shipping containers. I ended up keeping these and buying smaller ones of same type, all keyed alike for my shipping containers. I noticed that another user enlarged the hole in the shipping container lock box hasp to get it to fit and that's a possible solution, but i didn't want to do that. The smaller one works great. Very secure in the lock box.
Question:	Will this rust
Answer:	The padlock may not rust but there is a possibility of keys and the chrome/silver lock may grab some moisture if exposed for long
Question:	Can I obtain several of these keyed alike
Answer:	Hi, each lock has its own key. They can't be keyed alike.
Question:	Will this fit tongue of trailer or is the cylinder to large
Answer:	The shaft may be too large for the hitch clamp. It’s a good 1/4 to3/8 inch thickness so you may have to enlarge the hole. Great lock

• Padlock hasp set Material: stainless steel latch lock and high quality Iron padlock, shed locks with keys.
• Hasp lock latch Size: hasp lock 4.96*1.26 inch, Iron padlock 1.45*1.29 inch, good quality, well made, No sharp edges.
• Package included: 1x stainless steel door bolt hasp and 8x screws and 1x Iron padlock(equipped with 3 keys)
• Lock hasp set: Stainless steel hasp for indoor and outdoor use, easy installation by just a few screws, will not rust, ensuring durability and dependability.
• Shed locks with keys: Nice small lock that works just fine for a locker in an office locker room; used for residential cabinets, fences, sheds, workshops, garages, and storage lockers, safes and more.

User questions & answers

Question:	Is it comfortable
Answer:	Yes

Product description

The Master Lock No. 380T Laminated Padlocks feature a 1-9/16in (40mm) wide laminated steel body for maximum strength and reliability. The Rust-Oleum Certified finish provides a lifetime guarantee against rusting on the lock body. The 9/32in (7mm) diameter shackle is 3/4in (19mm) long and made of hardened steel, offering extra resistance to cutting and sawing. The 4-pin cylinder prevents picking and the dual locking levers provide resistance against prying and hammering. The Limited Lifetime Warranty provides peace of mind from a brand you can trust. Rust-Oleum Certified Protection is a registered trademark of Rust-Oleum Corporation.

From the Manufacturer

Master Lock Rust-Oleum Padlock

• Rust-Oleum certified protection s the lock body from rusting
• 1-9/16in (40mm) Wide laminated steel body for superior strength
• Hardened steel shackle for extra cut resistance
• Dual ball bearing locking for maximum pry resistance
• 4-pin cylinder helps prevent picking
• Keyed alike - same key opens both locks

User questions & answers

Question:	Are the locks waterproof
Answer:	I have had mine on a backyard fence for over five years and it has zero rust. Also, the lock mechanism is smooth. Great product!
Question:	Can I get these in a 6 pack keyed alike
Answer:	Hello. Unfortunately, this product is not setup to be sold keyed alike. Each lock or set of locks in retain packages will ship with a random key code.
Question:	If I order multiple sets of these locks, will they all be keyed alike or only the two in each set will be keyed alike
Answer:	Each pair of keyed alike locks was different. I have two sets (4 total locks). 1st set uses one type of key. 2nd set uses a different key
Question:	what is diameter of shackle
Answer:	A little less than 1.25" at it highest point, and a little less than .75" across. Both measurements taken from the inside of the shackle post.

Product features

Secure

Dual locking levers provide extra pry resistance and 4-pin cylinder helps prevent picking.

Sturdy

1-9/16in (40mm) wide laminated steel body for superior strength with a hardened steel 9/32in (7mm) shackle for extra cut resistance.

Best Used For

Residential gates, fences, sheds, workshops, garages, storage lockers, and tool boxes.

Product description

Master Lock 2300D pen oiler lock lubricant with PTFE. Over time, airborne dust, dirt, and chemicals can settle on and in locks and create friction inside the precision locking and keying components, thus interfering with the function. Locks must be maintained to keep them functioning properly and lengthen the product life. This is the ideal lubricant formulated specifically for locks. What is PTFE? PTFE is the acronym for Polytetrafluoroethylene, which is the most slippery material known to science today. All surfaces have microscopic irregularities, which create friction when rubbed against each other. The introduction of PTFE into these irregularities smoothes out the surfaces, reducing the wear and sticking that friction causes. The most familiar name of PTFE is Teflon, which is the registered trademark for DuPont’s non-stick cookware. Where can the new lock lubricant be used? Everywhere. This formulation is ideal for padlocks, door locks, automotive, marine, and multipurpose applications. The 2300D pen oiler is convenient for consumers and can easily be applied to keyways or shackle holes.

From the Manufacturer

Master Lock 2300D pen oiler lock lubricant with PTFE. Over time, airborne dust, dirt, and chemicals can settle on and in locks and create friction inside the precision locking and keying components, thus interfering with the function. Locks must be maintained to keep them functioning properly and lengthen the product life. This is the ideal lubricant formulated specifically for locks. What is PTFE? PTFE is the acronym for Polytetrafluoroethylene, which is the most slippery material known to science today. All surfaces have microscopic irregularities, which create friction when rubbed against each other. The introduction of PTFE into these irregularities smoothes out the surfaces, reducing the wear and sticking that friction causes. The most familiar name of PTFE is Teflon, which is the registered trademark for DuPont’s non-stick cookware. Where can the new lock lubricant be used? Everywhere. This formulation is ideal for padlocks, door locks, automotive, marine, and multipurpose applications. The 2300D pen oiler is convenient for consumers and can easily be applied to keyways or shackle holes.

• LOCK LUBRICANT APPLICATION: For indoor and outdoor use; Best used for padlocks, door locks, automotive, marine, and multipurpose applications
• DURABLE DESIGN: Keep your locks operating like new in any environment: snow, rain, freezing temperatures, marine, and extreme heat; Lock lubricant acts as a long lasting protective shield to prevent rust and corrosion; Can be used in a wide temperature range of -40°F to 500°F
• EASE OF USE: Oil pen designed for precision application inside locking devices; Apply 2-3 drops in key hole and shackle openings every three to six months to prolong the life of your lock

User questions & answers

Question:	If using this for a car key to get the ignition to work better without sticking; should you apply this directly on the car key or inside the ignition
Answer:	not sure really. but I assume it should not be an issue installing multiple applications
Question:	Will this product work as a handcuff lubricant
Answer:	No; it is designed for ink jet printers.
Question:	Is this product good for use with a combination padlock (lock without a key
Answer:	This i1 Studio can generate both monitor and printer profiles so you can have a fully color managed workflow from computer to print.
Question:	Is it refillable
Answer:	This software is to color correct the display. Ideally the display should be consistent in showing true print colors for your saved files. Use this device to calibrate your printer and print images. That’s the best way to see the benefit of calibrating the display.

Product description

Fully Functioning Vintage Style Lock.Highly durable and used for both indoor and outdoor decoration. Impressive Addition to Pirate, Medieval or Collections.Padlock comes complete with 2 keys,Cast Iron Lock.

• Fully Functioning Vintage Style Lock.
• Highly durable and used for both indoor and outdoor decoration. Impressive Addition to Pirate, Medieval or Collections.
• Padlock comes complete with 2 keys,Cast Iron Lock.
• Old Trunk Lock Home Decoration Improvement.
• Wedding card box lock/Luggage trunk lock/Lighting accessory/Man cave accessory/Jewelry making/Home decor accent /Storage lock/Gun case lock Styles/Steampunk/Vintage/Rustic

User questions & answers

Question:	tell people its small jewerly box size i bought one for 40"x 19" chest it looks like a toy
Answer:	The formula within this lubricant was designed to be best used with padlocks, cylinders and mechanisms within the lock.
Question:	I unlocked it the first time no problem but how do I get it to lock
Answer:	I can't imagine why not. It's a lock lubricant. Double check online. There's probably someone, somewhere whose posted a video about handcuff maintenence.
Question:	Are all the keys the same size for all of the locks
Answer:	Pamela I don't really know. I've only used it on my key locks and works fine with them. If you put a few drops in the shackle opening it should work ok.
Question:	Will this fit on a work locker
Answer:	The reservoir of the pen oiler cannot be opened for a refill. HOWEVER, if you have a supply of the lubricant, you can refill it by squeezing the tube to expell air, then put the spout into the lubricant and allow it to be sucked up into the oiler. Squeeze and then repeat until the reservoir is full. At some point the plastic pen reservoir may crack.

• 5 KEYS MATCH EACH LOCK - These padlocks come with a set of 5 identical keys so everyone who needs one can have one. No more having to call up your partner to find the keys! You could also keep a couple of spares in a secure location, so you’ll never accidentally lock yourself out again.
• LARGE HEAVY DUTY 2 INCH SIZE - The large 2 x 2.6 x 0.5 inch padlock is made from hardened steel and solid brass for durability you can trust. Considering your security: bigger is better.
• INDOOR OR OUTDOOR USE - Lock cabinets in your home, or secure a gat in your yard. These weather resistant padlocks are fit for indoor and outdoor use.
• NO CODES TO REMEMBER - Share access with 5 keys without requiring anyone to remember codes in order to access valuables.
• SECURE YOUR PROPERTY - Whether you need to keep your power tools locked away while on holiday, gym locker secured during a workout or luggage protected while travelling... keep your property secure with this lockset.

Product features

5 Keys Included per Lock

These padlocks come with a set of 5 identical keys so everyone that needs one can have one. No more having to call up your partner to find the keys! You could also keep a couple of spares in a secure location, so you’ll never accidentally lock yourself out again. (2-Pack includes 10 keys)

Large 2 Inch Size & Heavy Duty

The large 2 x 2.6 x 0.5 inch padlock is made from hardened steel and solid brass for durability you can trust. Considering your security: bigger is better.

Secure Your Property

Whether you need to keep your power tools locked away while on holiday, gym locker secured during a workout or luggage protected while travelling... keep your property secure with this lockset.

Weather-Proof

In the case you need to lock a cabinet or secure a gate, the weather resistant padlocks are fit for indoor and outdoor use.

Practical and Easy to use

No need to remember codes to access valuables, the simple lock and key design provides practical protection.

Product description

20mm Brass Luggage Lock by Travol

• HEAVY DUTY BRASS METAL FINISH - 20MM Made From Incredibly High Quality & Strong for a Smaller Lock
• HARDENED STEEL SHACKLE - For Extra Strength Security
• 3 KEYS INCLUDED - Plenty of Spares - Just in Case One is Lost!
• PERFECT FOR LOCKING MULTIPLE ITEMS - Our Tiny Lock can be used for Locking Your Luggage, Suitcase, Totes, Backpacks, Locker, Cabinets, Fridges, and So Much More!
• 100% MANUFACTURER MONEY BACK GUARANTEE - Tarvol Guarantees All of It's Products and Tools for Life!

User questions & answers

Question:	Will this lock fit on a zipper on the luggage
Answer:	Yes that's what I used it for. It is very good quality also.
Question:	Are these keys unique to each lock
Answer:	yes
Question:	Would this work for a backpack
Answer:	Yes
Question:	are all the keys manufactured the same for all locks you sell
Answer:	I assume you are asking the seller. I am a purchaser of the lock. I sure hope all the key that come with the locks that are sold are not the same key! That would defeat the purpose of a lock. Hope you get an answer.

Product description

Feature:

Made of high-quality non-Conductive thermoplastic, the locks has great temperature resistance and wear resistance, it can offer long term durability and strong locking.

Compliance with "one employee, one lock, one key" directive, security and writable Label for marking

The locks are designed for lockout tagout applications and features a cylinder which is reserved for safety padlocks. The key can ensure the padlock is not be unlocked.

Specifications:

Material: Steel+Plastic

Color: Red

Item Package:

Item Package Quantity :1

• High Quality: Made of high-quality non-Conductive thermoplastic, the locks has great temperature resistance and wear resistance, it can offer long term durability and strong locking.
• Special Design: Compliance with "one employee, one lock, one key" directive, security and writable Label for marking
• Wide Application: The locks are designed for lockout tagout applications and features a cylinder which is reserved for safety padlocks. The key can ensure the padlock is not be unlocked.
• Package Content: Including 2 padlocks, each padlock is equipped with 2 keys.
• 100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within a month you purchase this product, you can enjoy a worry-free return service. And any question feel free to contact us, we will try our best to help you.