12 best fireplace damper hooks
Fireplace damper hooks are hardware accessories used in fireplaces to control the opening and closing of the damper, which is a movable plate or valve that regulates airflow in the chimney. These hooks are related to sliding door hardware and fall under the category of door hardware and tools in the home improvement industry. Here's what you need to know about fireplace damper hooks:
Purpose: Fireplace damper hooks serve the purpose of allowing users to adjust the position of the damper easily. By manipulating the damper's position, you can control the amount of air that enters the fireplace and, consequently, the intensity of the fire.
Design: Damper hooks are typically made of metal, such as steel or wrought iron, to withstand the high temperatures within the fireplace. They come in various designs, with a handle on one end and a hook or loop on the other.
Operation: To use a damper hook, you insert the hook or loop end through the damper control mechanism, which is often a metal rod or chain. By pulling or pushing the handle end of the hook, you can move the damper into the desired position, either opening it to allow more airflow or closing it to reduce airflow.
Safety: Fireplace damper hooks are a safety feature for wood-burning fireplaces. Properly controlling the damper helps regulate the combustion process and prevents smoke from entering the room. It also ensures that the fire burns efficiently.
Energy Efficiency: Using a damper hook can improve the energy efficiency of your fireplace by preventing warm indoor air from escaping through the chimney when the fireplace is not in use. Closing the damper tightly when the fireplace is not in use helps retain indoor heat.
Maintenance: It's essential to keep the damper and damper hook in good condition. Regularly inspect them for any signs of wear or rust, and replace them if necessary to ensure smooth operation.
Installation: Installing a damper hook is relatively straightforward. You need to locate the damper control mechanism in your fireplace and insert the hook through it. Ensure that the hook is secure and that it can be easily reached and operated when needed.
Variations: There are different types of damper control mechanisms, so the specific design and size of a damper hook may vary depending on your fireplace's configuration.Be sure to choose a hook that is compatible with your fireplace.
In summary, fireplace damper hooks are essential tools for controlling the airflow in a fireplace, regulating the intensity of the fire, and ensuring safety and energy efficiency. They are simple yet effective devices that help homeowners make the most of their wood-burning fireplaces while maintaining control over heat and smoke.
Below you can find our editor's choice of the best fireplace damper hooks on the market
Metal Fireplace Damper Pull with Solid Brass Handle
BCW
Product description
Made from cast iron and solid brass, this damper is great for use with any fireplace. Either side of the handle is engraved with text that reads open, and closed to make it easy to use.
- Damper pull is made from cast iron with a solid brass handle.
- Handle has been beautifully polished.
- Brass handle features engraved sides that indicate whether the damper is opened or closed.
User questions & answers
| Question: | Do you leave it in fireplace all the time? Even when fire is in fireplace |
| Answer: | 6 inches |
| Question: | Does it get hot |
| Answer: | Approximately 8"x8" |
| Question: | Can the hook be turned 90 degrees relative to the brass sign itself, or must it remain in the position shown in the picture |
| Answer: | I'm going to guess 4x4 or 5x5... |
Upper Deck Solid Brass Metal Open/Closed Fireplace Damper Sign Hanging Flue Pull Hook
Product description
When the cold weather strikes, so do high heating costs, so it is important to know whether your fireplace damper is open or closed. This fireplace damper features a solid iron metal hook for attaching to your flue, and a polished brass handle which reads OPEN DAMPER on one side and CLOSED DAMPER on the other. This new hanging flue pull hook measures 10 3/4" long, with the brass sign measuring 5 1/2" long. Built for durability, this damper pull ships brand new in manufacturers packaging.
- Solid Brass fireplace sign and metal flue hook which reads OPEN DAMPER on one side, and CLOSED DAMPER on the other
- Hanging flue pull hook is made from solid iron, your years of reliable service enduring the high heat of a fire in the fireplace
- Damper Measures 10 3/4" long
- Brass sign handle measures 5 1/2" long
- Ships brand new in manufacturers packaging with our 100% customer satisfaction guarantee
User questions & answers
| Question: | Is it designed to hang from damper arm at all times, including while fire is burning |
| Answer: | mine is all one piece and it is iron |
Upper Deck Damper Hook for Fireplace - Solid Brass
Product description
Between the old cobblestones and the broken pavers you aren't quite sure if your sandals will endure the walk up the driveway but you have to persist. When you heard that your childhood home was up for sale you just knew that you had to make it to the realtor's open house. You hadn't been inside for decades and you might not ever get the chance to do so again. As you climb the creaky stairs to the wrap-around porch your immediate thought is that it seems much smaller now than it had back then. It makes sense that people say the places from your childhood look much less intimidating when you go back and visit them as an adult but this is the first time you've actually had the chance to experience that for yourself. Once inside you wander from room to room past the kitchen where you enjoyed your daily cereal past the large open living room with the old stone fireplace in one corner. You Pause for a moment remembering a time when your grandmother came to babysit and decided to light in the Log in the fireplace to keep you cozy and warm. Little did she know that Mom and Dad had not yet had the flue cleaned or the damper opened. Damper hook for fireplace - solid brass constructed from solid brass with a sturdy hook that hangs above your fireplace. One side indicates the damper is open - the other side lets you know it's Closed. Measures 10.5 inch x 1.5 inch
- A stylish safety precaution. This damper hook adds Style and a measure of safety to your fireplace
- Made from solid brass. This damper hook adds a stylish and functional touch to any fireplace
- Ready to hang. A metal hook is attached for easy Hanging above your fireplace
- Double sided design. One side indicates that the chimney flue is open while the other side indicates that it is Closed
- A perfect gift. This damper hook makes a great gift for anyone with a fireplace in their home
User questions & answers
| Question: | Can i keep this attached to the open damper when i have a fire going or do i have to remove it before starting a fire |
| Answer: | It is cast iron and it gets very hot but normally you use it to open damper before lighting the fire. To shut down use a hot glove. |
| Question: | Can i sue this to open and close the damper |
| Answer: | I was able to turn mine as you suggest. But it starts to get loose, you are starting the process of unscrewing the brass sign from the black hook. |
Hanging Solid Brass Fireplace Damper Open Closed Sign
Product description
Solid Brass OPEN / CLOSED Damper Sign Crafted of solid brass. Reads, "DAMPER OPEN" & DAMPER CLOSED" The sign measures 1-1/2"H x 3-1/2"W A classy sign for your fireplace area.
- Made of solid brass
- Attractive fireplace accessory
- The sign measures 1-1/2"H x 3-1/2"W
User questions & answers
| Question: | Can this be left hanging while the fire is burning |
| Answer: | We don’t, we only hang it when we close the flue. We hang it on the fireplace tool stand when not in use |
Uniflame, C-9158, Solid Brass Open & Close Damper Pull
Uniflame
Product description
C-9158 Features: -Easy grip handle. -Solid brass finish. Product Type: -Fireplace tool. Finish: -Brass. Material: -Brass. Dimensions: Overall Height - Top to Bottom: -13". Overall Product Weight: -1.2 lbs.
- Solid brass construction
- Convenient hook to open and close damper
- 13 inches high
- Durable and decorative
User questions & answers
| Question: | What finish is the damper pull? The description says brass but from the photo it looks to be more of a nickel finish |
| Answer: | If your damper has a hook or a hole you can slip it into. With my fireplace, the damper is too high, so it is hard to see if I use it like that |
| Question: | Do you have to purchase a separate one for open and close |
| Answer: | People ......come on????? Of course you don't leave it on the damper arm when a fire is burning! It is only meant as a reminder to open the damper before a fire is started to prevent the house from filling with smoke. Once the damper has been opened, the reminder tag is placed at some other place until that time that you decide to close the damper again. |
Black Ball Damper Pull by Pilgrim (18156)
Product description
The Pilgrim Black Ball Fireplace Damper Pull makes closing and opening your damper simple. This essential fireplace tool is 14 inches long and saves you from the soot and grime of the fireplace. With it's classic design and black finish, this damper pull can double as a hearth decoration that suits any fireplace.
- Black Finish
- Fourteen Inches Long
- Decorative Ball Handle
- Produced with the highest grade materials
User questions & answers
| Question: | Does the handle piece unscrew so that you can place through a medallion on brick |
| Answer: | No way! I bet the chain will melt. When we open our fireplace damper, we hang it on the mantle; when we close it, we hang the brass sign on the damper handle. |
| Question: | What is this damper pull made of |
| Answer: | Depends on how your damper lever works. Mine is over the fire when lit so I just remove it when open |
Damper Clamp, Fireplace - with EZ Winger
Product description
The Damper Stop Clamp is installed on the chimney damper blade to prevent accidental full closure of the fireplace damper while the gas log set is burning in your fireplace. This new Patent Pending design allows quick installation without using tools. Perfect for the weekend handywoman or handyman getting their home ready for the Realtor's Home Inspection, or just for safety and code compliance. The solid stainless steel bolt prevents corrosion and rust in the critical flue spaces. This fireplace damper clamp meets strict California building codes and exceeds the similar codes of other states. Simple step-by-step English language instructions are included.
- Body is of sturdy steel. UL Listed
- EZ Winger Stainless bolt - NO Tools required !
- Accepted by SoCal Gas, PG&E, and FHA Inspectors
- California based, Limited Lifetime Warranty
RCK Sales Fireplace Cast Iron Chimney Damper Chains Both Open and Close 18" Long
Product description
Fireplace Damper replacement Damper Chains both Open and Close 18" Long
- Fireplace Brick Masonry Throtte Damper Replacement Chains Both Open & Close
- Material: Cast Iron O & S with steel chains
- Open "S" hook on the end to attach to Damper
- Over all Length is 18" Long
User questions & answers
| Question: | Can the chains be easily shortened? i only need 10 inches total length |
| Answer: | I bought this as a gift for my son and it was sent directly to him. I likes it very much....no complaints but I can add nothing about the product itself. sorry. |
| Question: | How do you use these? Do they remain in all the time |
| Answer: | Mine is brass. |
| Question: | Is each chain 18 inches long |
| Answer: | No. You just turn it over. Open on one side, Closed on the other. |
Treasure Gurus New Solid Brass Open/Closed Fireplace Damper Sign
Product description
When the cold weather strikes, so do high heating costs, so it is important to know whether your fireplace damper is open or closed. This fireplace damper features a solid iron metal hook for attaching to your flue, and a polished brass handle which reads OPEN DAMPER on one side and CLOSED DAMPER on the other. This new hanging flue pull hook measures 10 3/4" long, with the brass sign measuring 5 1/2" long. Built for durability, this damper pull ships brand new in manufacturers packaging.
- Hanging flue pull hook is made from solid iron, your years of reliable service enduring the high heat of a fire in the fireplace
- Ships brand new in manufacturers packaging with our 100% customer satisfaction guarantee
- Damper Measures 10 3/4" long, with brass sign handle measuring 5 1/2" long
- Solid Brass fireplace sign and metal flue hook which reads OPEN DAMPER on one side, and CLOSED DAMPER on the other
UD Hanging Fireplace Damper Open Closed Sign
Product description
Perfect Solid Brass OPEN / CLOSED Damper Sign keeps your house from filling with smoke! Reads, "DAMPER OPEN" & DAMPER CLOSED". A very helpful decor accessory.
- Embossed Solid Brass
- 2 inches high and 3 inches wide
- One side reads DAMPER OPEN, other side reads DAMPER CLOSED
- attractive chain
- Classy fireplace accessory
User questions & answers
| Question: | Does the other side of the plaque say "Damper Closed |
| Answer: | No, it does not unscrew |
VESTAL Poker-Style Control Dampers
Product description
Poker-Style Controls come standard with the Vestal Cast-Iron Fireplace Dampers. The Poker-Style Control measures 12" in overall length. It consists of a "catch" piece that bolts to the damper frame, and a control arm which connects to the damper plate with a cotter pin (provided). Moving the hole in the control arm regulates the width of the damper opening. Some like this for it's simplicity while others prefer the Rotary-Style Control.
- Measures 12" in overall length - allow 1/2" clearance in masonry at each end for expansion
- It consists of a "catch" piece that bolts to the damper frame, and a control arm which connects to the damper plate with a provided cotter pin
- Moving the hole in the control arm regulates the width of the damper opening.
- For Vestal Cast-Iron Fireplace Dampers
- Inspected and prepared for poker contol installation only.
SMARTSTANDARD 6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to install -Includes Step-By-Step Installation Instruction Fit 36"-40" Wide Door Panel (I Shape Hanger)
Product description
If you want to buy extra sets of I-Shape Hanger to install more doors, Please buy our I-Shape Hanger( ASIN: B01LOCZEI0 Listing Link: https://www.amazon.com/dp/B01LOCZEI0 ) ,This I-Shape hanger is compatibale with our I-Shape sliding door hardware kit.
This new SMARTSTANDARD Country Black Steel Sliding Barn Wood Door Hardware can transform your doorway into a side sliding entry. This is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way.
1. Hole spacer of the rail is 16". It is good for the wall stub.
2. Detailed instruction: use both words and pictures to display the steps of installing the barn door hardware.
3. All the measurements are in inch rather than in centimeter.
4. All our products have "SmartStandard" Logo on the package.
Brand:SMARTSTANDARD
IMPORTANT: Only SmartStandard is the legal seller of this product. All product from other sellers are fake imitation and not under warranty policy.
- Why choose us: With 1/3 of the cost, you can get the same quality products here! This hardware kit are provided along with a completely turnkey experience.
- Simple and easy to install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
- Package included: A Barn Door Hardware Kit (2x 3.3FT Rails, 5x Rail Spacers, 2x Rollers, 2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key; All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
- Door weight capacity: 220 lb, Fit door panel width: 36"-40", Fit door panel thickness: 1 3/8" and 1 3/4".
- Right choice for your house: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
User questions & answers
| Question: | Do I need the piece of wood behind the rail |
| Answer: | yes. the screw holes in the metal bar may not align with the wall studs. using a back board allows you to place the bar where you need it to allow the sliding door to go where it needs to go. plastic anchors in the plaster board may not provide the necessary support for the bar, the door, and the added strain caused by the movement of the sliding door. |
| Question: | Is a 4.75" clearing from my ceiling to the top of the door frame enough space |
| Answer: | I have one installed where rail mount bolts are 4.5” on center from ceiling. There’s maybe 5/8” clearance to hang/remove door. It’s tight. If you could slide the door on to the rails from the side you might be able to get rail bolt centers as close as 3.75” from top based on what I’m looking at but I’d dry fit before committing |
| Question: | My door is only 1 inch thick. Bought the unit failing to consider this. Is it still possible to use it |
| Answer: | I'm confused about the 1 inch issue, specifications say 3/4 - 1 3/4! My door is 11/4 , does this kit accommodate that? |
| Question: | With a maximum door panel thickness , how close is the door to the drywall or baseboard |
| Answer: | The maximum door panel thickness is 1 3/4 inch and the distance of the door to the drywall is about 1/8 inch. |
Latest Reviews
View all
Slow Cooker
- Updated: 27.07.2023
- Read reviews
Load Binders
- Updated: 10.04.2023
- Read reviews
Biotin Capsules
- Updated: 16.02.2023
- Read reviews
Cake Flavors
- Updated: 06.07.2023
- Read reviews
Home Video Games
- Updated: 22.03.2023
- Read reviews