13 best thin section ball bearings

Product description

Product Specification:

Length:16 inch.

Width:1.77''(45mm).



Product Feature:

Material:cold rolled steel.

Finish Type:zinc plated.

Screw Included?:Yes.

Attention:mounting brackets not included.

Guarantee:Any problems with the drawer slides,please feel free to contact us immediately at any time,we'll definitely help you solve the problem.

• ★ 6 pairs of 16 inch,mounting screws included (extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it.
• ★ Side mounted Steel ball-bearing action creats silent working.16'' in length.1.77'' in width.
• ★ Black and made of solid cold rolled steel.Rust resistant for your lifetime use.
• ★ Black buckle on the third channel makes easy removal for installation.Nylon rubber produces less noise at closing and opening,creating a silent life environment for your family.
• ★ Guide for Choosing Size of Drawer Slides:To determine which size of slides are good for your drawer, please measure the length of the drawer without the frame board. And if the length is not even, please choose 1 inch shorter. The length of slides can't be longer than the cabinet case depth.And face frame cabinets will require a rear mounting bracket, whereas for faceless cabinets the slides are mounted directly on the side.

User questions & answers

Question:	So it does not have mounting brackets with it. What is mounting bracket
Answer:	/Duration 0:50Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:50 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Hi...u will need a120v to 12v plug converter. I used a remote to open close the actuator in lieu of a on/off switch. Thx
Question:	What are the dimensions and spacing of the holes, and each segment of the slide? Technical drawing link
Answer:	Not sure, it would probably speed it up but the motor has to rest frequently so not to overheat at 12 volts
Question:	What is the thickness of each? Trying to build my drawers prior to their arrival and need to know. Are they 1/2” thick each
Answer:	Its about 1-3/4” on the round part however there is the square part on top and that makes it around 2-1/8”. They work really great I have a pair to lift my pickup bed as a dump bed
Question:	Will these lock when they are fully extended
Answer:	No it won’t fit, it’s about 1-3/4” at thinnest part

Product description

Features:

Thin section ball bearings are used for applications where space limitations are of the utmost importance. The difference between the inside and outside diameters of the rings has been minimized or thinned out. Made from high quality bearing steel, these bearings have low noise and long service life. They are double shielded to avoid contaminants entering and save lubricant. There comes total 10 pieces miniature bearings which you may use for many different projects.

Specifications:

Type: 6700ZZ

Material: Bearing steel

Inner Diameter: 10mm

Outer Diameter: 15mm

Thickness: 4mm

Quantity: 10pcs

Package Includes:

10 x Bearings

• 【High Quality Material】Our longboard bearings are made of high-quality bearing steel materials, which are strong enough for long-term use
• 【Good Seal】The double shielded bearings can avoid contaminants entering and save lubricant
• 【Thin Bearing】The difference between the inside and outside diameters of the rings has been minimized or thinned out
• 【Specification】Type: 6700ZZ;Material: Bearing steel;Inner Diameter: 10mm;Outer Diameter: 15mm
• 【Note】Small bearings, please store them carefully to avoid children swallowing

Product description

Product Specification:

Length:18 inch.

Width:1.77''(45mm).

Thickness:0.5''(12mm).



Product Feature:

Material:cold rolled steel.

Finish Type:zinc plated.

Load capacity:100LB

Screw Included?:Yes.

Attention:mounting brackets not included.

Guarantee:Any problems with the drawer slides,please feel free to contact us immediately at any time,we'll definitely help you solve the problem.

• ★ 2 pairs of 18 inch,mounting screws included(2 extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it.
• ★ Side mounted Steel ball-bearing action.100 LB capacity.18'' in length.1.77'' in width.0.5'' in thickness.
• ★ Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.
• ★ Soft-Close Design.Double springs design produces less noise at closing and opening,creating a silent life environment for your family.
• ★ Guide for Choosing Size of Drawer Slides:To determine which size of slides are good for your drawer, please measure the length of the drawer without the frame board. And if the length is not even, please choose 1 inch shorter. The length of slides can't be longer than the cabinet case depth.And face frame cabinets will require a rear mounting bracket, whereas for faceless cabinets the slides are mounted directly on the side.

User questions & answers

Question:	does this have a front face bracket? or is there one that works for this slide
Answer:	Hi, Max wattage at 120V is 800W. Max wattage at 277V is 1200VA. All the best!
Question:	Can we get one replaced please? Only one is defective. Seller Tobinice please answer
Answer:	You would hook the black wire to the feed coming in to the light. The white wire will hook up to the white wires. And the red wire hooks up to the black ballast wire.
Question:	The word "pair" is confusing. Does 1"pair" equal 2 slides which collectively are good for 1 drawer? Or, is 1 "pair" something else
Answer:	Worked with mine
Question:	So are they saying we are buying the part that attaches to the drawer but the part that attaches to the cabinet isn’t included
Answer:	I did this using a 120V relay. Switched hot powering coil, and dimming wires through N/C contacts. Works fine.

Product description

• C-type radial ball bearing for use where space is limited
• Deep-groove geometry for high speeds and supporting radial loads
• 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads
• Conforms to ABEC 1F precision standard for performance within a narrow range of variation
• Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

Product description

• X-type 4-point contact ball bearing for use where space is limited and moment loads are high
• Deep-groove geometry for high speeds and supporting both radial and axial loads
• 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads
• Conforms to ABEC 1F precision standard for performance within a narrow range of variation
• Rubber seals to retain lubricant and for protection against contaminants

Product description

VESLA HOME 10 Pairs 16 Inch 3-Section Full Extension Soft Close Ball Bearing Metal Cabinet Drawer Slides,110 LB Capacity Side Mount Slow Close Drawer Hardware Slide,Available in 14”16" 18" 20" 22" Lengths.

• 10 pairs 14 inch soft close drawer slides, Mounting screws included. Attention: the mounting brackets are not included.
• Made from high-grade cold rolled steel that is zinc plated. Surface prevent rust. Three-section drawer slide offer Load-bearing 110LB.
• spring damping design, the drawer can be closed silently and smoothly. automatic closing performance! Steel ball-bearing action that offer less noise at closing and opening.
• Side mounted Steel ball-bearing action, non handed close design, active stop, Internal rail separation is simple and easy to install and remove drawer.Soft Close function: This feature can make your furniture smooth movements with nice and soft stops. Noise reduction and prevent your baby from pinching. Soft close drawer slides are ideal for cabinetry, desk pedestals and general storage drawers.
• Before purchasing, please measure the depth of your cabinet and select the correct drawer slides. VESLA HOME soft close drawer slide stay by a Lifetime Warranty.

User questions & answers

Question:	Where would I find rear mounting brackets for these slides
Answer:	No,mounting bracket is not included.
Question:	What distance do you need from the edge of the drawer box to the edge of the cabinet opening for the slide to properly fit
Answer:	There are plenty of holes to mount the slides securely and the slides come with screws. So I wouldn't worry about it.
Question:	How do these install in a framed cabinet? Do I need another part
Answer:	I'd suggest not trying to prebuild your drawers. My project is completed, so it's difficult for me to get exact measurements. The slides, mounted, are 9/16" in width. My tolerances were very tight because I was using them on the sides of sliding shelves, NOT drawers where they were concealed. Also, the actual length of the slides is closer to 19 5/8". They are NOT 20" in length. I've written the distributor and told them to put the exact measurements for their products in the Specifications section of the product page. They ARE great slides, though. I've had no problems with them since installation. They run smooth, close well, and don't jam.
Question:	Do I need mounting brackets if I have frameless cabinets
Answer:	No, they don’t lock at full extension

Product features

Soft close drawer slides

VESLA HOME specializes in cabinet hardware

VESLA HOME Soft Close Drawer Slides

• Solid steel bearing shaft, no noise during opening and closing.
• The sliding material is thicker, bearing 110 pounds, and the material is electroplated and will not rust.
• Internal rail separation is simple and easy to install.
• Use on kitchen&bathroom&bedroom furniture,kitchen cabinet, sliding cabinet doors, office cabinets, and bathroom cabinets,dresser drawer.
• Size selection: Slide's length less than or equal to drawer depth minus 4 mm.

Strong restoration spring

Damping hydraulic cylinder & trigger

Snap-in design, easy to disassemble

What Is Full Extension Drawer Slides

Our slides is a full extension drawer slides,When it is unfolded, its unfolded length is approximately equal to its natural length when closed.

So you only need to choose the same length of slide according to the depth of your drawer.

Product description

Specification:



Material: Cold Rolled Steel

Color: Silver

Feature: 3-fold Smooth Telescopic Slide

Folding Size : 20 x 4.5 x 1cm / 8" x 1.8" x 0.4" (L*W*H)

Unfold Size(Max) : 40 x 4.5 x 1cm / 16" x 1.8" x 0.4" (L*W*H)

Package Include : 2Pieces x 8 inch Drawer Slides

Notice: Installing screws are not included here.



Made from high-grade cold rolled steel which is electrom zinc plated, durable and anti-rust.



Telescopic drawer slides with steel ball bearings,quiet，smooth and accurate slide.



Suitable for such as filing cabinets, desk pedestals and general storage drawers.

• Made from high-grade cold rolled steel which is electrom zinc plated, durable and anti-rust. Steel ball-bearing action slides that ensures smooth and quiet performance
• Steel ball-bearing action slides that are ensure smooth and quiet performance.
• Coming with 2 pieces 8 inch 3-section ball bearing drawer slides. However, the mounting brackets are not included. Side mounted, non handed and folding design, positive stop
• Lever disconnect for easy drawer removal. Perfect for office furniture, cabinets, closets, kitchens

User questions & answers

Question:	Can you use these underneath a sliding shelf, or are they side mount only
Answer:	I had the same problems I just threw the out and purchasedfrom Rockler
Question:	How much is the weight capacity rating of these
Answer:	1"pair" equals 2 slides and it's for 1 drawer.
Question:	Can you use these underneath a sliding shelf, or are they side mount only
Answer:	This is what it says in the description: ★ 6 pairs of 24 inch,mounting screws included (extra screws offered for spare use). Attention: the mounting brackets are not included,please buy separately if need it. It depends on what the inside of your cabinets look like. And if your drawers, when closed are flush to the front of the cabinet or protrude in front of the cabinet. My drawers protrude in front of the cabinet. So the front of the slide mounted to the drawer opening with one screw. At the rear of my cabinets, I needed to purchase, separately, the "L" shaped mounting bracket, into which this drawer slide will slide into.

Product description

3 section fold design, multiple ball bearings for quiet and smooth operation, stopping release latch, side mount;

Cushioned feature for pick-up noise reduction;

Installing screws are not included.

IUsed in Kitchen Cabinet, Drawer, Office Desk, Furniture, Tool Box.

• Product Name: Drawer Slide;
• Size(Folded): 32.5x4.5x1.2cm/13"x1.8"x0.5"(L*W*H)
• Main Color: Black
• Weight: 370g; Package Content: 2pcs x Drawer Slide

Product description

Features:



Material: Cold-rolled steel



Finish: Zinc Plated



Width: 53mm / 2-1/16"



Length: 55.88cm / 22in



Max. Loading Capacity: 113kg / 250lb



Installation Method: Side Mount



Package Content:



1 x Pair of Drawer Slides



Screws are included for easy installation

• Pair of 22" length 2-1/16" width drawer slides - 250 lb load rating per pair.
• Lever disconnect allows mechanism to be separated for installation and removal.
• Made from high-grade cold-rolled electrom zinc plated steel for corrosion resistance and longevity.
• Three-section track. Double row steel ball bearing action slides that offer smooth and quiet performance.
• Mounting screws are included for easy installation. The mounting brackets are not included.

User questions & answers

Question:	Which mounting brackets are suggested
Answer:	If I’m understanding your question correctly, your drawer box needs to be 1” smaller than the opening in the cabinet or 1/2 inch on each side. It’s my experience that when building your drawer boxes error to the side of them being to narrow as you can always put a shim behind the slides to make it fit. If your drawer is too big, your main option is ro disassemble cut the drawer down and reassemble. Hope this helps.
Question:	What is the width on these. How much wider do my mounting boards need to be than my drawer
Answer:	Most scenarios you would just mount a board on both sides that you would then mount the slides too.
Question:	How much side clearance
Answer:	No need for mounting brackets, these work well with frameless cabinets. I screw mine directly to the sides
Question:	Soft close
Answer:	My installation did not need front mounting brackets. The slides do not come with front or rear mounting brackets.

Product description

Application:the Kitchen Cabinets,RV Overhead Cabinet Doors,Small tatami, wardrobe, bookcase, etc.

Total Length: 10.6 inch

Specification: 150N

Bearing weight: 33lb

Package includes: 2 X Cabinet Door Lift Support; 2 X Metal fixing brackets.

Product description

Features: These bearings are made of high quality steel for low noise and long service life. They are double shielded to avoid contaminants entering and save lubricant. Bearings have a 17mm inner diameter, a 23mm outer diameter, and a 4mm thickness. These are great for small hobby 17mm shaft/rod projects.

There comes total 10 pieces miniature bearings which you may use for many different projects.

Specification:

Model: 6703ZZ

Material: High-carbon chromium bearing steel

Type: Deep-groove high-speed

Rolling Element: Single row

Inner Diameter: 17mm / 0.7in

Outer Diameter: 23mm / 0.9in

Thickness: 4mm / 0.2in

Quantity: 10pcs

Weight: 43g / 1.5oz(approx.)

Package list:

10 * Bearings

• These bearings are made of high quality steel for low noise and long service life.
• They are double shielded to avoid contaminants entering and save lubricant.
• Bearings have a 17mm inner diameter, a 23mm outer diameter, and a 4mm thickness.
• These are great for small hobby 17mm shaft/rod projects.
• There comes total 10 pieces miniature bearings which you may use for many different projects.

Product description

Product Name : Ball Bearing Drawer Slides;

Feature : 2 Sections

Folding Size: 28 x 2.5 x 0.9 cm / 11" x 0.98'' x 0.35" (L x W x T);

Full Length : 56 cm / 22".

Material : Cold-rolled Steel with Steel Ball Bearings, Plastic; Color : Silver Tone



—— 2 section fold design, multiple ball bearings for quiet and smooth operation, stopping release latch, side mount



—— Cushioned feature for pick-up noise reduction



—— Installing screws are not included



—— Used in Kitchen Cabinet, Drawer, Office Desk, Furniture, Tool Box



—— Made from high-grade cold rolled steel that is electrom zinc plated.



—— Steel ball-bearing action that offer less noise at closing and opening.



—— Lever disconnect for easy drawer removal



—— Side mounted, non handed design, positive stop



Package Include: 1 pair Drawer Slides

• 💡GOOD QUALITY: Made from high-grade cold rolled steel which is electrom zinc plated, durable and anti-rust. Steel ball-bearing action slides that ensures smooth and quiet performance.
• 💡SPECIFICATION: Section: 2 Sections; Unstretched Size : 28 x 2.5 x 0.9 cm / 11" x 0.98'' x 0.35" (L x W x T); Full Length : 56 cm / 22".
• 💡Steel ball-bearing action that offer less noise at closing and opening.
• 💡WILDY USE:Lever disconnect for easy drawer removal. Perfect for office furniture, cabinets, closets, kitchens.
• 💡WHAT YOU GET: Coming with A pair 11 inch 2-section ball bearing drawer slides. However, the mounting brackets are not included. Side mounted, non handed and folding design, positive stop.

Product description

WADSN Drawer Slides

We promise every customer with a high-end product ,all our product were designed by a well known designer in this field ,and that it was manufactured strictly in the factory,now our product are popular aroud the world.

Features:

【Material and load-bearing 110LB 】Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.Side mounted Steel ball-bearing action.Max 110 LB capacity.

【Soft Closing Technology】Double springs design produces less noise at closing and opening,creating a silent life environment for your family.

【Package Include】Includes 5 pairs of 14 inch drawer slide rails and 50pcs mounting screws.The drawer length is 14 inch; the drawer slide width is 1.77 inch.

【Double-row Solid Steel Ball & Three-section Guide Rail Design】Support the drawer slide full extension.The thickness of the three-section drawer slide plate is 0.5x0.5x0.6 inch.

Warm Tip:The mounting brackets are not included,please buy separately if need it.We provide 30 days unconditional return, you can contact us at any time if you have any questions.

• 【Material and load-bearing 110LB 】Zinc Plated and made of solid cold rolled steel.Rust resistant for your lifetime use.Side mounted Steel ball-bearing action.Max 110 LB capacity.
• 【Soft Closing Technology】Double springs design produces less noise at closing and opening,creating a silent life environment for your family.
• 【Package Include】Includes 5 pairs of 14 inch drawer slide rails and 50pcs mounting screws.The drawer length is 14 inch.The drawer slide width is 1.77 inch.
• 【Double-row Solid Steel Ball & Three-section Guide Rail Design】Support the drawer slide full extension.The thickness of the three-section drawer slide plate is 0.5x0.5x0.6 inch.
• 【Warm Tip】Please confirm the size of the slide rail you need.The mounting brackets are not included,please buy separately if need it.We provide 30 days unconditional return,you can contact us at any time if you have any questions.