13 best non toxic wood fillers

Product description

Use it to fix holes, dents, scratches, gouges and any other defects on interior wood surfaces. Wood filler dries natural after going on pink. When the change occurs, that means your wood is ready to paint, stain or sand. After the wood filler dries to a natural color, easily stain or paint your wood to make it look just like new. 16 Oz Color: Natural Dries natural after going on pink Color changes to indicate when ready to paint, stain or sand Appeals to light do it yourselfers Non-toxic patented formula Resist shrinking and cracking Stainable, paintable and sandable Easy water cleanup Solvent-free.

From the Manufacturer

Elmer's Carpenter's Color Change Wood Filler for interior use is ideal for repairing holes, dents, scratches, gouges and defects on any wood, wallboard, molding or painted surface. It goes on purple and dries natural when it is ready to sand, stain or paint without shrinking or cracking. It has a similar taber abrasion to Elmer's Interior Carpenter's Wood Filler. This patented Elmer's Carpenter's Color Change is made in the USA to appeal to most home DIYers. When it's time for a specific fix, Elmer's application-focused adhesives make it easy to find exactly the right Elmer's for the job!

• Goes on purple and dries natural to blend in with wood
• Sandable, stainable, and paintable
• For interior use only
• Easy to clean up with water
• Elmer's: The Glue with the Orange Cap
• Patented formula goes on purple and dries natural when ready to sand, stain or paint
• Stainable, paintable and sand able

User questions & answers

Question:	Did anyone try to stain this with color? Does it blend
Answer:	It sometimes has a terrible reaction to some chemicals and stays pink. There's no guarantee with this unfortunately.
Question:	can dye or colorant be mixed in before application
Answer:	It is pink before it dries, so don't see how you could pre mix the dye
Question:	I need to repair a pine table, but will only be sanding and waxing it -- will the white show? Is this only for use on something to be stained or paint
Answer:	The white will show...I don't recommend it for what you need. Good luck!
Question:	I bought a container about two years ago, and its a little stiff. can it be thined out to make it softer. what can i thin it with. thank you
Answer:	Thank you for contacting Elmer's. You could add a little water to thin out the product. We would be unable to determine how well the product will work because the product does have a 2 year shelf life.Thanks, Newell Brands Office Products

Product features

About Us

Elmer's Products Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. Elmer's inspires people to create, build and learn for life.

• DESIGNED WITH EVERYONE IN MIND: From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before or after staining or on raw wood to get a smooth finish on oak, ash, mahogany, walnut and other porous woods. A favorite product for tabletops, desktops, cabinets, vanities, millwork, pianos, guitars and furniture refinishing. For that glass smooth finish, start and finish all your hard to fill wood projects with Aqua Coat.
• WATERBORNE AND ECO- FRIENDLY: Our entire line of products are MADE IN THE USA, low VOC, low odor, non-flammable, non-combustible, water-based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
• VERSATILE AND COMPATIBLE WITH OTHER PRODUCTS: Filling your wood grain before you stain not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, saving you time and money. Aqua Coat Clear Grain Filler can be mixed with water soluble pigments/dyes.
• EASY TO USE- Work the Clear Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bondo blade, old credit card, or fingers with a glove. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. VERY lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler. 2-3 coats are recommended.
• LONG LASTING- A little goes a long way. You can use one quart to do 2 quarts on a medium sized kitchen (30-40) drawers and doors.

User questions & answers

Question:	I have old polyurethaned oak cabinets. Do I clean, sand prime cabinets first then apply aqua coat or is the process reversed
Answer:	The most successful process for refinishing your cabinets with Aqua Coat Grain Filler would be as follows. 1 We highly recommend you do this process completely to the end on the back of a drawer to help you assure success. 2 Sand with 220 grit sand paper. Wipe down with a dampwater paper towel or old t-shirt. Do not use tack rags. they contain oils or wax 3 De gloss 4 On your sample drawer back, apply 2 coats of Aqua Coat Grain Filler with a credit card. bondo blade, rag for curves. Lightly sanding with a 320-400 grit paper in between coats. You are not sanding it down, you are not sanding it off, the only reason you sand is to form a better bond between coats. Only sand immediately before applying the next coat. 5 for testing purposes On half of this drawer back apply a third coat. When you have completely gone through the testing process you will be able to decide if you need 2 or 3 coats. Lightly sand 3rd coat with 320-400 immediately before applying primer. 6 Apply 2 coats of a high build primer water based, oil based, solvent based 7 Apply 2 coats of a quality paint. water based. oil based, solvent based To save an immense amount of time we highly recommend going completely through the testing process to see if you need 2 coats or 3 and have confidence in your process.
Question:	Have you had any problems when filling in deeper gouges or chip out? I have used another product and it left the areas white when it dried
Answer:	If you left areas white then you applied it to thick. It is a pore and grain filler. Not a deep gouge filler. If you would like to touch up deeper indentations add a little sawdust from the piece you are working on to the grain filler.
Question:	How do i apply material
Answer:	I've used this on several guitars (including mahogany, spruce, padauk, bubinga). After sanding, I apply any stain I might want. Usually, I just use Minwax natural to add depth with not much color. I follow that with a coat of Zinsser Wax Free Seal Coat, diluted 50:50 with denatured alcohol. After a light sanding I do 2 or 3 coats of Aquacoat, using either a motel keycard as a spatula or just rub it in while wearing nitrile gloves, making sure to wipe off the excess to minimizing sanding. After it's dry, I lightly sand it, looking carefully for any spots that had build up, and finish it off with a dozen plus light coats of aerosol Deft Lacquer (gloss of your choice).
Question:	If this has a jello consistency, how will it stay in place when applying it to my upper cabinet frames? Won't it run off a bit
Answer:	Yeah, it will stay in place in a vertical application. Even upside down. It's way thicker than Jello. More like vasoline once spread. Once any stain or sealer is applied, I add a coat of gloss finish. Then, you can really see the pores or tear out your trying to fill. Add a the aquacoat, let it dry (20 minutes or so), sand, and repeat a few times. Then, proceed with finishing. Works great.

Product features

Ideal Customers For Clear Wood Grain Filler

• Cabinet refinishers
• Furniture makers
• Luthiers
• Gun stock finishers
• Cabinet makers
• Piano restoration
• Antique restoration
• DIY woodworking hobbyists

DIRECTIONS FOR USE:

Aqua Coat Clear Wood Grain Filler should be applied after the piece is stained, and/or a seal coat has been applied.

• Stain and seal coat must be dry and lightly sanded with 220-grit or finer sandpaper.
• Grain Filler can be tinted with water-soluble colorants or dyes.
• If no stain or seal coat is used, you may apply Clear Grain Filler to the raw wood.
• Grain Filler may be applied with a soft cloth, using a circular motion, much like applying a paste wax. Or work Grain Filler generously into open wood grain pores with a small squeegee or flexible putty knife.
• Inspect to see if the grain is completely filled, then scrape or squeegee to remove excess.
• Let dry 30-45 minutes, then lightly sand with 320 grit paper.
• If grain is not completely filled, repeat the application process.

Better for Users and The Environment

Aqua Coat's Clear Wood Grain Filler is water-based and friendly to the environment! That along with its low odor and ease of use makes it the better choice for professionals and home DIY'ers!

Product description

Water-Based Wood & Grain Filler - Base/Neutral - 8 oz By Goodfilla | Replace Every Filler & Putty | Repairs, Finishes & Patches | Paintable, Stainable, Sandable & Quick Drying

• ⚒️ HIGH QUALITY & MONEY SAVING: Save time and money with this wood filler that does not shrink, sink, or crack, and has excellent adhesion. Only need to apply once, and it flawlessly accepts any finish or stain! In fact, this product can be mixed with any pigment, tint, stain or dye.
• ⚒️ DESIGNED FOR PROFESSIONAL WOODWORKERS: This is the most innovative, easy-to-use, water-based wood filler in the WORLD. Designed for professional woodworkers but perfect for your everyday DIYer, too.
• ⚒️ HARDY & CONSISTENT: As any woodworker will tell you, they throw hardened wood filler out all the time. But Goodfilla offers an unlimited shelf life since it reconstitutes with water and is freeze-thaw stable.
• ⚒️ MADE FOR EVERY HANDY-PERSON & WOODWORKER: Whether you have furniture to repair, a floor to finish, a craft to complete or an insturment to design, this is YOUR product. Sand, stain, tint, prime, fill and seal every knot on your to-do list. Goodfilla is so easy to sand you'll be amazed by how much time you save. BONUS: It's a green product; Zero VOC, zero waste and non-toxic.
• ⚒️ USA MADE & 100% SATISFACTION GUARANTEE: Your experience with this product is our number one priority. If your Goodfilla wood filler doesn't do everything you need it to do with ease, we'll refund your money up to 365 days with no questions asked!

User questions & answers

Question:	If you can reconstitute this product with water, then doesn't that mean the repair applied to your job cannot be cleaned with water
Answer:	For six months, thanks!
Question:	Can you use this to fill in permanent gaps between my old school farm house wood boards on floor
Answer:	Maybe if the dog Kaye’s down all the way. No standing. But I don’t have a 80 pound dog. I bought it for my nephew who is 1 year old weighing 30 or 40 pounds.
Question:	Does this dry hard and is it sandable
Answer:	Doesn’t look possible without significant engineering work.
Question:	what material are these made from
Answer:	Pull up on the middle part to collapse, i

Product features

WOOD FILLER--HEAVY BODY PASTE

GoodFilla's water-based wood filler can also be used as a grain filler, primer, knot filler, and much more!

Use GoodFilla to smooth out deep groves in hardwood floors, window sills, scratched doors, tables, furniture, and on any wood surface that needs attention. Easy to work and high-quality results every time.

Easily fix scratches/divots on hard wood floors!

If you have any marks, holes, scratches, or divots in your hardwood floor, use GoodFilla for a quick and easy fix. Match the color of the GoodFilla to the color of your floors. Apply to floor, let dry, and lightly sand or smooth with damp cloth. Seal with a clear coat and you're done!

WOOD FILLER--TROWEL-READY

Our proprietary water-based trowel-ready wood filler is EASY-TO-SPREAD and eliminates the common problem of the water getting sucked out very quickly. GoodFilla's formulation allows a longer open time and holds on to the water longer.

Perfect for grain-filling floors, guitars, and more!

Gork's Trowel-Ready wood filler is ideal for covering large areas with a squeegee/trowel, such as hardwood floors, but is equally suited for more intricate jobs like finishing instruments, models, and other fine woodworking projects.

Filla-in-a-Bag--Powdered Wood Filler

This innovative product appeals to woodworkers, makers, and artists since it seamlessly dovetails with all water-based products, plus lacquer.

Get exactly what you want every time: Mix the perfect amount for your project, to your ideal viscosity, with no waste.

Great for exterior use.

For exterior use, mix GoodFilla Filla-In-A-Bag with commonly available water-based weatherproof glue or finish. The result is a very durable water resistent wood filler with excellent adhesion.

Fix chipped walls easily and quickly!

Mix Filla-in-a-Bag with paint to fill in scratches, chips, or divots on your walls.

Easy cabinet makeover with Filla-in-a-Bag!

Simply mix your desired paint color with our Filla-in-a Bag Powdered Wood & Grain Filler to achieve amazing results, while saving time and money! See our video on how to "Upcycle Old Cabinets" on this page for more detailed instructions.

TRANSFORM YOUR ENTIRE KITCHEN WITH A QUICK AND EASY CABINET UPDATE!

CAN BE USED ON ANY WOODEN SURFACE, SO GET CREATIVE!

FAQs

Q: Do I need to match the filler to the color of the wood if I plan to stain the wood?

A: GoodFilla is designed to accept stain similarly to wood. However, the stain needs to be darker than the filler. If you are using a light stain, match the filler to the color of the wood.

Q: How do I make a custom color with the base/neutral?

A: A liquid or powdered universal tint or dye is ideal. You can also use paints, food dyes, or stains to tint the filler to your desired color. Results will vary depending on the pigment load. Always test by applying the final finish over the dried filler.

Q: Can you use the filler outside?

A: Yes. Mix with a water-based weather-proof glue. For extra protection, be sure the area is coated/sealed with a clear coat.

Q: Can I mix wood flour into the filler?

A: Yes. Test the results and color by applying finish to the dry, sanded filler.

Product description

E855 Features: -Wood filler. -Paintable and sandable. -Resists shrinking and cracking. -Easy water clean-up. Name: -Spackling. Dimensions: Overall Height - Top to Bottom: -1.53 Inches. Overall Width - Side to Side: -6.9 Inches. Overall Depth - Front to Back: -2.5 Inches. Overall Product Weight: -0.36 Pounds. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Sands easily to a smooth finish

User questions & answers

Question:	What does "This is an aftermarket of generic part" mean? Is this fake
Answer:	The product I received wasn't "fake". It works just fine. It's wood filler. You can buy the exact same product in the hardware store, same packaging and everything.
Question:	Would this protect against carpenter bees
Answer:	This is intended mostly for filling small holes, so if it is the wood they are after, you would not be covering enough to protect it from them.
Question:	Cover over nail head metal
Answer:	Yes this will cover that for nail heads as well
Question:	Could I use this to fill in a screw hole that is too big and rescrew in that area
Answer:	Yes, it dries to a hard consistency. I believe that would work.You can also put some pieces of toothpick in with the screw, as you drill it in, to hold it in place.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

Minwax 13610000 Wood Putty, 3.75 Ounce, Natural Pine

From the Manufacturer

Minwax is America's leading brand of wood finishing and wood care products. From staining and protection, to preparation, maintenance, cleaning and repair, Minwax makes and keeps wood beautiful.

• Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood
• Color-matched to Minwax wood finish stains
• Easy to use, no sanding necessary
• Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood
• Color-matched to Minwax wood finish stains
• Easy to use, no sanding necessary
• 3.75-Ounce
• Natural Pine

User questions & answers

Question:	Using the white for paint, can you fill nail holes and "walk away?" That is, if you apply very cleanly with a putty knife, will it be paint ready
Answer:	Yes it comes assembled
Question:	Can I get it in one gallon or quarter gallon
Answer:	About 8" tall and 4" wide.
Question:	Can I glue raw wood to the patched part. What kind of glue
Answer:	The wheels do turn in the sand. If the sand is very deep, I struggle pulling it. My chair falls out of it too. I'm that thrilled with it.
Question:	It seems that the maple color of this is too ‘red’ - could I use the pine to fill nail holes in maple veneered plywood? Would that match closer
Answer:	I want to say at least 10 plus pounds. I struggle to lift it into the back of my suv

Product features

Minwax Wood Putty is a non-hardening, pre-mixed putty that repairs small holes and covers other minor imperfections in painted, stained, and finished wood.

• Wood Putty is easy to use, quick and permanent.
• It is non-hardening and bonds well to wood.
• Wood Putty is color-matched to Minwax Wood Finish stains to make your wood repairs easier.

• DESIGNED WITH EVERYONE IN MIND: From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before painting to get a smooth finish on oak, ash, mahogany, walnut and other porus woods. A favorite product for cabinet and vanity refinishing, millwork, and furniture refinishing. For that glass smooth finish, start and finish all your wood projects with Aqua Coat.
• WATERBORNE AND ECO- FRIENDLY: Our entire line of products are low VOC, Non-Flammable, Non-combustible, Low Odor, Fast Drying, Easy to Apply, Easy Sanding, excellent adhesion, Water Clean Up, Environmentally Friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
• VERSATILE AND COMPATIBLE WITH OTHER PRODUCTS: Filling your wood grain before you paint or lacquer not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, this leads to less coats of paint or lacquer needed saving you time and money. Our grain fillers are compatible with oil-based and water based primers, lacquers and paints. Aqua Coat White Grain Filler can be mixed with any water soluble pigments/dyes.
• EASY TO USE- Work the White Cabinet Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bond blade, old credit card, or fingers with a glove. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. VERY lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler or your first coat of primer and paint.
• LONG LASTING- A little goes a long way. You can use 1 quart to do 2 coats on a medium size kithchen[30-40] doors and drawers It has a shelf life of over a year and passes two freeze/thaw cycles.

User questions & answers

Question:	Is there a recommended temperature range for applying this product
Answer:	Yes ideally you want to apply where your temp is 72 degrees and 50% humidity. You can apply it between 65 -85 degrees. Any thing outside of that will affect dry and cure time.
Question:	Can I let the final Aqua coat layer stand two weeks before painting
Answer:	Yes you can let it dry for an unlimited time before applying primer and paint. Just make sure you lightly sand with 320 right before you start applying your primer.
Question:	what if the cabinets have already been painted? Should I sand them all the way down Or will a light sanding work
Answer:	If you have previously painted your cabinets you will need to let them fully cure [as per the manufacturers guidelines]. Not dry but cure. At that point you will lightly scuff sand with 220 to give it some tooth so the grain filler has something to stick to. After scuff sanding you can blow off the dust or use a cotton rag. Do not use tack cloths as they have oils and waxes in them and will repel the grain filler. Then apply 1-2 coats of grain filler. 1 coat of primer and 1-2 coats of paint. Always try your complete planned processes on the front of a drawer first.
Question:	Can I use this on old cabinets installed in 1972? Also, can I use it on the inside of the cabinet or is it just for the outer doors
Answer:	Yes. Inside or outer surface, wherever you have wood grain that you want to make smooth. I used Aqua Coat on the outside of oak cabinets and both sides of the doors and drawer fronts. The outside of the doors needed 3 coats with light sanding (220) between coats. It was labor intensive for the 22 cabinets I painted but well worth the time and effort.

Product features

Aqua Coat White Cabinet Grain Filler

Aqua Coat's White Cabinet Grain Filler can be used before painting...

• cabinets
• kitchen tables
• desks
• chairs
• coffee tables
• side tables
• bathroom vanities
• wood shelving
• bookcases

DIRECTIONS FOR USE:

Work the White Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bond blade, old credit card, or fingers with a glove. Filler may also be applied with a cotton rag or a soft cloth in a circular motion. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. VERY lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler and your first coat of paint. The only reason you are sanding is for adhesion purposes. 2-3 coats are recommended. Follow with 2 coats of primer and 2 coats of paint.

Better for Users and The Environment

Aqua Coat's White Cabinet Grain Filler is water-based and friendly to the environment! That along with its low odor and ease of use makes it the better choice for professionals and home DIY'ers!

Product description

Elmer's Carpenter's Wood Filler for interior use only is ideal for repairing holes, dents, scratches, gouges and defects on any wood, wallboard, molding or painted surface.

• Elmer's #E849D8 PT Ind/Out Wood Filler
• ELMER'S PRODUCT INC
• Craft
• This is an aftermarket of generic part

User questions & answers

Question:	Do this product work with laminate kitchen cabinets?! I want to fill in the 70s door designs and make it flat; I’ll than paint over it
Answer:	This product is used to repair holes, dents, scratches, and defects on wood, wallboard, molding or painted surface.
Question:	What color is it
Answer:	This wood filler is color beige.
Question:	What color does it dry
Answer:	Same color as when it's wet, tan or light wood color
Question:	Is this shapable like a putty or is this more of a liquid
Answer:	It is shapable like a putty. It doesn't dry so quick so have to work real fast with it. It doesn't take a long time either though once you've applied it for it to dry enough to sand it although I try to leave it drying overnight. It's one of the best wood fillers on the market in my opinion.

Product features

Carpenter's Wood Filler

Elmer’s makes it easy to take on any project or repair at home or in the workshop.

Ideal for repairing holes, dents, scratches,

and defects on any wood, wallboard,

molding, or painted surface

Product description

E868 Features: -Paintable and sandable wood filler. -Resists shrinking and cracking. -Easy water clean-up. -Solvent free. Name: -Spackling. Dimensions: Overall Height - Top to Bottom: -1.53 Inches. Overall Width - Side to Side: -6.9 Inches. Overall Depth - Front to Back: -2.5 Inches. Overall Product Weight: -0.33 Pounds. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Sands easily to a smooth finish

User questions & answers

Question:	Could this be used to fill a crack in a table. It's the whole length of the table and wide enough for water to spill to the ground through it
Answer:	I would use a good wood putty that is not porous in place of this.
Question:	would this fix nail holes that are striped where hidges hold door? does it dry hard
Answer:	Yes, if you do it right. Any good wood glue or wood filler can be put in a stripped wood screw hole, and the screw pushed into the wet filler, but be careful -- once the filler sets up, you won't be able to tighten or remove the screw. Add a toothpick or 2 if the hole is really loose, just so the screw will stay in place while drying.
Question:	Can this be used on top of chalk paint
Answer:	This product is used to repair interior wood holes and gouges. Loose paint and wood chunks should be removed before application.
Question:	Can it be used to fill cracks or holes in the fresh wood stump
Answer:	This wood filler is designed for filling holes and gouges in wood. Note that it is non-structural, so it should not be subject to critical stress.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

Filla-In-A-Bag is unlike anything you’ve ever seen. After years of experimenting with existing finishing products, furniture maker Barry Gork took matters into his own hands to simplify and perfect the process. This innovative product appeals to woodworkers, makers, and artists since it seamlessly dovetails with all water-based products—plus NC lacquer! Our convenient packaging means you get exactly what you want every time. Mix the perfect amount for your project, to your ideal viscosity, with no waste. Ideal for patching, grain-filling, and even inlay since it does not shrink, sink, crack, or fall out and accepts stain and finish just like wood. Can be mixed with water and/or any WB pigment, dye, stain, clear finish, or paint Can be mixed with NC lacquer Accepts stain and finish just like wood Multiple applications: Patching, grain-filling, and even inlay Does not shrink, sink, crack, or fall out Unlimited shelf-life Environmentally friendly, non-toxic, zero VOCs, biodegradable Proudly made in America

• Non-toxic powder that can be mixed with water and/or any WB pigment, dye, stain, clear finish, or paint
• Accepts stain and finish just like wood
• Multiple applications: Patching, grain-filling, and even inlay
• Environmentally friendly, non-toxic, zero VOCs, biodegradable
• Does not shrink, sink, crack, or fall out

User questions & answers

Question:	after drying can this be stained with an oil base stain
Answer:	If you repair, stain/paint and seal the wood, as a *good* repair SHOULD be done, then there should be no problem. If the product in the jar is a bit dry and one adds water to reconstitute, it’s not the same as if one has filled gouges or cracks... let the product dry and cure... THEN cleaned with water. Fillers are a different creature once they cure; especially if painted/stained/sealed. There’s a big difference between the two circumstances.
Question:	I cut turquoise stone cabochons and need filler that I can tint and use to fill cracks and voids in the brown to black matrix stone. Goodfilla work
Answer:	It's a putty for small projects like fixing a chip, or grain filling the surface of wood before a finish. It's not a building material. has no structural properties.
Question:	What is the ratio water to filler? i.e., how much prepared filler does a 12 oz. or 12 lb. bag yield
Answer:	Yes, and yes. It dries very hard and is easily sanded.
Question:	i have brazilian walnut it has all those pores in it, would i have to use the walnut to fill in the pores or could i use the clear and then i could u
Answer:	It's made from calcium carbonate and assorted binders.

Product features

WOOD FILLER--HEAVY BODY PASTE

GoodFilla's water-based wood filler can also be used as a grain filler, primer, knot filler, and much more!

Use GoodFilla to smooth out deep groves in hardwood floors, window sills, scratched doors, tables, furniture, and on any wood surface that needs attention. Easy to work and high-quality results every time.

Easily fix scratches/divots on hard wood floors!

If you have any marks, holes, scratches, or divots in your hardwood floor, use GoodFilla for a quick and easy fix. Match the color of the GoodFilla to the color of your floors. Apply to floor, let dry, and lightly sand or smooth with damp cloth. Seal with a clear coat and you're done!

WOOD FILLER--TROWEL-READY

Our proprietary water-based trowel-ready wood filler is EASY-TO-SPREAD and eliminates the common problem of the water getting sucked out very quickly. GoodFilla's formulation allows a longer open time and holds on to the water longer.

Perfect for grain-filling floors, guitars, and more!

Gork's Trowel-Ready wood filler is ideal for covering large areas with a squeegee/trowel, such as hardwood floors, but is equally suited for more intricate jobs like finishing instruments, models, and other fine woodworking projects.

Filla-in-a-Bag--Powdered Wood Filler

This innovative product appeals to woodworkers, makers, and artists since it seamlessly dovetails with all water-based products, plus lacquer.

Get exactly what you want every time: Mix the perfect amount for your project, to your ideal viscosity, with no waste.

Great for exterior use.

For exterior use, mix GoodFilla Filla-In-A-Bag with commonly available water-based weatherproof glue or finish. The result is a very durable water resistent wood filler with excellent adhesion.

Fix chipped walls easily and quickly!

Mix Filla-in-a-Bag with paint to fill in scratches, chips, or divots on your walls.

Easy cabinet makeover with Filla-in-a-Bag!

Simply mix your desired paint color with our Filla-in-a Bag Powdered Wood & Grain Filler to achieve amazing results, while saving time and money! See our video on how to "Upcycle Old Cabinets" on this page for more detailed instructions.

TRANSFORM YOUR ENTIRE KITCHEN WITH A QUICK AND EASY CABINET UPDATE!

CAN BE USED ON ANY WOODEN SURFACE, SO GET CREATIVE!

FAQs

Q: Do I need to match the filler to the color of the wood if I plan to stain the wood?

A: GoodFilla is designed to accept stain similarly to wood. However, the stain needs to be darker than the filler. If you are using a light stain, match the filler to the color of the wood.

Q: How do I make a custom color with the base/neutral?

A: A liquid or powdered universal tint or dye is ideal. You can also use paints, food dyes, or stains to tint the filler to your desired color. Results will vary depending on the pigment load. Always test by applying the final finish over the dried filler.

Q: Can you use the filler outside?

A: Yes. Mix with a water-based weather-proof glue. For extra protection, be sure the area is coated/sealed with a clear coat.

Q: Can I mix wood flour into the filler?

A: Yes. Test the results and color by applying finish to the dry, sanded filler.

• ⚒️ HIGH QUALITY & MONEY SAVING: Save time and money with this wood filler that does not shrink, sink, or crack, and has excellent adhesion. Only need to apply once, and it flawlessly accepts any finish or stain! In fact, this product can be mixed with any pigment, tint, stain or dye.
• ⚒️ DESIGNED FOR PROFESSIONAL WOODWORKERS: This is the most innovative, easy-to-use, water-based wood filler in the WORLD. Designed for professional woodworkers but perfect for your everyday DIYer, too.
• ⚒️ HARDY & CONSISTENT: As any woodworker will tell you, they throw hardened wood filler out all the time. But Goodfilla offers an unlimited shelf life since it reconstitutes with water and is freeze-thaw stable.
• ⚒️ MADE FOR EVERY HANDY-PERSON & WOODWORKER: Whether you have furniture to repair, a floor to finish, a craft to complete or an instrument to finish, this is YOUR product. Sand, stain, tint, prime, fill and seal every knot on your to-do list. Goodfilla is so easy to sand you'll be amazed by how much time you save. BONUS: It's a green product; Zero VOC, zero waste and non-toxic.
• ⚒️ USA MADE & 100% SATISFACTION GUARANTEE: Your experience with this product is our number one priority. If your Goodfilla wood filler doesn't do everything you need it to do with ease, we'll refund your money up to 365 days with no questions asked!

User questions & answers

Question:	Can this be used outdoors like on a mailbox post
Answer:	Yes, but it needs to be mixed with a water-based weatherproof glue like Titebond 3 or WeldBond.
Question:	Can this be used after a coat of polyurethane
Answer:	Yes. You can use it between coats of finish. You can also mix it with the polyurethane prior to application. which will take away the step of putting a finish on to seal after application. However, this process also makes the dried filler more difficult to sand (either water or solvent base will work)
Question:	This is water based, will oil based stain be compatible to go over it on a deck? I use an oil based stain on my deck
Answer:	Yes, an oil base stain will work. Since you are planning on using it outside, we recommend mixing the GoodFilla with a water-based weatherproof glue like Titebond 3 or Weldbond.
Question:	Can anyone who has used this to fill floor cracks tell me how it handles expanding and contracting over time due to humidity
Answer:	If your floor is stable (by that I mean it does not move up and down like a trampoline), the wood filler will remain in the crack. You may want to fill in the winter when the gaps are the widest.

Product features

WOOD FILLER--HEAVY BODY PASTE

GoodFilla's water-based wood filler can also be used as a grain filler, primer, knot filler, and much more!

Use GoodFilla to smooth out deep groves in hardwood floors, window sills, scratched doors, tables, furniture, and on any wood surface that needs attention. Easy to work and high-quality results every time.

Easily fix scratches/divots on hard wood floors!

If you have any marks, holes, scratches, or divots in your hardwood floor, use GoodFilla for a quick and easy fix. Match the color of the GoodFilla to the color of your floors. Apply to floor, let dry, and lightly sand or smooth with damp cloth. Seal with a clear coat and you're done!

WOOD FILLER--TROWEL-READY

Our proprietary water-based trowel-ready wood filler is EASY-TO-SPREAD and eliminates the common problem of the water getting sucked out very quickly. GoodFilla's formulation allows a longer open time and holds on to the water longer.

Perfect for grain-filling floors, guitars, and more!

Gork's Trowel-Ready wood filler is ideal for covering large areas with a squeegee/trowel, such as hardwood floors, but is equally suited for more intricate jobs like finishing instruments, models, and other fine woodworking projects.

Filla-in-a-Bag--Powdered Wood Filler

This innovative product appeals to woodworkers, makers, and artists since it seamlessly dovetails with all water-based products, plus lacquer.

Get exactly what you want every time: Mix the perfect amount for your project, to your ideal viscosity, with no waste.

Great for exterior use.

For exterior use, mix GoodFilla Filla-In-A-Bag with commonly available water-based weatherproof glue or finish. The result is a very durable water resistent wood filler with excellent adhesion.

Fix chipped walls easily and quickly!

Mix Filla-in-a-Bag with paint to fill in scratches, chips, or divots on your walls.

Easy cabinet makeover with Filla-in-a-Bag!

Simply mix your desired paint color with our Filla-in-a Bag Powdered Wood & Grain Filler to achieve amazing results, while saving time and money! See our video on how to "Upcycle Old Cabinets" on this page for more detailed instructions.

TRANSFORM YOUR ENTIRE KITCHEN WITH A QUICK AND EASY CABINET UPDATE!

CAN BE USED ON ANY WOODEN SURFACE, SO GET CREATIVE!

FAQs

Q: Do I need to match the filler to the color of the wood if I plan to stain the wood?

A: GoodFilla is designed to accept stain similarly to wood. However, the stain needs to be darker than the filler. If you are using a light stain, match the filler to the color of the wood.

Q: How do I make a custom color with the base/neutral?

A: A liquid or powdered universal tint or dye is ideal. You can also use paints, food dyes, or stains to tint the filler to your desired color. Results will vary depending on the pigment load. Always test by applying the final finish over the dried filler.

Q: Can you use the filler outside?

A: Yes. Mix with a water-based weather-proof glue. For extra protection, be sure the area is coated/sealed with a clear coat.

Q: Can I mix wood flour into the filler?

A: Yes. Test the results and color by applying finish to the dry, sanded filler.

Product description

E861 Features: -Paintable and sandable wood filler.-Resists shrinking and cracking.-Easy water clean-up.-Solvent free.-For interior and exterior use.-Golden Oak.-3.25 fl oz. Color/Finish: -Sands easily to a smooth finish. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

From the Manufacturer

From filling nail holes in molding strips to filling gaps in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy. Carpenter’s Wood Fillers are sandable and paintable - and they come in six convenient colors. For interior use only.

• Paintable and sandable
• Sands easily to a smooth finish
• Resists shrinking and cracking
• Easy water clean-up
• This is an aftermarket of generic part
• Paintable and sandable
• Resists shrinking and cracking

User questions & answers

Question:	Has anyone used this on natural bamboo trim
Answer:	I never have but it may work if you can find a color match.
Question:	How many tubes are in this
Answer:	What you see is one!
Question:	Cancelled order when i saw it was shipping amzl-us. i don't want amazon's shipping service. how do i reorder so it ships usps, ups, or fedex
Answer:	If you go to any other website, you'll pay more even if they say it's free shipping. I join Prime after all these years and I have no regrets. I'm saving in many things.
Question:	Which wood filler do i use on plain wood from a lumber yard if i am painting oil base leather brown paint
Answer:	The best type of wood filler to use would be the ProBond Wood filler since it is stainable.

Product features

Elmer's Carpenter's Wood Filler

From filling nail holes in molding strips to filling gouges in hardwood floors, Elmer’s Carpenter’s Wood Filler tubes make the task quick and easy.

• Dry Time: 12-24 Hours
• Indoor
• Paintable

About us

For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.

By continuing to develop innovative new products, Elmer's has become the trusted brand when it comes to fueling creativity and providing outstanding product performance in the classroom, at home, in the workshop and at the craft table. At Elmer's, we inspire people to create, build and learn for life.

Product description

Minwax 42853000 Stainable Wood Filler, 16-Ounce

From the Manufacturer

Minwax is America's leading brand of wood finishing and wood care products. From staining and protection, to preparation, maintenance, cleaning and repair, Minwax makes and keeps wood beautiful.

• Ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces
• Stainable Wood Filler is specially formulated to accept Minwax penetrating wood stains
• It is designed for use with oil-based and water-based wood stains
• Wood filler
• Stainable and paintable
• Interior and exterior use
• Fast drying
• Sands easily

User questions & answers

Question:	do i have to mix the entire container at once
Answer:	This fill need to be use and let dry for some time before you can stain /paint over it, and when storing it for the next time turn the container up side down so it doesn't dry out over time.
Question:	Why can't I get it out of the tube
Answer:	It will harden with age, just sitting on your shelf. Or it might have come to you from old stock. Once the tube is opened, it will dry out and harden quickly. Probably need to get a new container.
Question:	Can I drill into hardened mini wax wood filler and re-screw a hinge
Answer:	Yes, you can. When filling larger holes: you can speed up the drying process by stuffing part of the gap with a small cutoff piece of wood. Make sure to overfill the area, that way it will sand to a straight, smooth finish
Question:	What is difference or recommended use regarding wood filler and two part epoxy
Answer:	You must make your questions clearer. MinWax Wood Filler when mixed with epoxy is an excellent product.

Product features

Stainable Wood Filler

Minwax Stainable Wood Filler is ideal for repairing cracks, small gouges, nail holes, knot holes and other defects in all types of unfinished indoor and outdoor wood surfaces.

• Stainable Wood Filler is specially formulated to accept Minwax penetrating wood stains.
• It is designed for use with oil-based and water-based wood stains.

Product description

Plastic Wood, 6 OZ, White, Latex Based Wood Filler, For Cracks, Gouges, Holes and Other Surface Defects On Furniture, Woodwork, Molding, Cabinets, Paneling, Plywood, Windows, Doors and Even Painted Surfaces, Easy To Use, Low In Odor, and Cleans Up With Water, Looks and Acts Like Real Wood.

• A high-performance, solvent-based wood Filler that hardens to give a repair that is 3X stronger than the wood itself (compared to White Pine)
• This professional-grade, heavy duty wood Filler contains real wood fibers so it looks and acts like real wood
• It can be sanded, cut, drilled, screwed, planed, stained, varnished, painted, or Lacquered
• It provides strong nail and screw anchoring without splitting
• DAP plastic wood professional wood Filler dries fast and hard, and is shrink and crack resistant

User questions & answers

Question:	Which sandpaper grit should I use to smooth it out
Answer:	I used this to fill in holes caused by woodpeckers. I believe last summer I used a medium fine grit. Doesn't take much to smooth it out.
Question:	Why is mine so watery
Answer:	Did u "work" the tube (with lid on work up & down because sometimes it separates a little from sitting). If that doesn't work then return it for new 1. Should be kind of a thick toothpaste consistency.
Question:	Can this be used under acrylic paints
Answer:	I use latex paint over so why not acrylic too
Question:	I am looking to fix the door hinges of a ikea pax wardrobe with a stripped the screw hole. doors are heavy and can i apply this and screw it after
Answer:	Use glue and a wooden matchstick. Put wood glue in the stripped hole. Insert the matchstick and let dry. Cut the matchstick flush with the surface and drill a new hole. Larger holes use multiple matchsticks or slivers of wood