13 best grout sealers

Product description

Miracle Sealants 511 Spray-On Grout Sealer is a fast and easy way to seal tile grout. Unique spray-on sealer provides an invisible barrier that is resistant to oil, stains and water absorption. It does not change the natural look of the grout. Works on interior and exterior new and old tile grout surfaces to penetrate, protect and seal.

From the Manufacturer

Miracle 511 Spray-On Grout Sealer is a new fast and easy way to seal tile grout. This unique spray-on sealer provides an invisible barrier that is resistant to oil, stains and water absorption.

• Use indoor or out on sanded or un-sanded new grout, old grout or natural stone multi-hard surfaces
• Formula designed for maximum stain protection of all cementitious grout
• Covers up to 250 linear square feet per can and may be applied as little as 2 hours after grouting surface
• Penetrates and seals grout in a quick, convenient, easy to use spray application
• UV transparent, will not yellow and resists weather elements

User questions & answers

Question:	What is the best way to apply it if basically your whole house needs the sealant
Answer:	It is a spray so would be tough doing the whole house
Question:	If you applied this in a daily-use shower, how long has it lasted before water stopped beading on the grout and you needed to reseal
Answer:	Couple of years.
Question:	Can this be used after using a grout pen
Answer:	I am not positive, but I would imagine allowing the grout pen drying for 24 hours it would be fine. This product was recommended by the contractor that laid my tile and what he uses.
Question:	Can I use it on quartz as sealant
Answer:	I am not sure. I used it on ceramic tile grout and it worked great. It does say it can be used on natural stone.

Product features

Miracle Sealants Grout Aerosol Spray Penetrating Sealers, 15 oz

511 Spray-On Grout Sealer is a fast and easy way to seal tile and stone grout. It provides an invisible barrier resistant to oil, stains, and water absorption. It can be applied as soon as 2 hours after grouting. If applying to existing grout, it needs to be clean, dry and free of any sealers or coatings.

Uses: Sanded and un-sanded cementitious grout joints on tile & stone installations. One can seals 250 linear feet of grout (approximately 125 square feet of installed tile).

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 500 square feet per pint
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

User questions & answers

Question:	Does this product off gas VOCs? I can’t seem to find an ingredient list
Answer:	no
Question:	How long for drying
Answer:	1 hour
Question:	Can this product be used on Porcelaine tile
Answer:	I don't see why you would want to -- marble and stone are porous so need sealant, porcelain is not, so shouldn't need it
Question:	how do you clean up after
Answer:	After a few minutes wipe off excess with dry cotton towel. If you miss any (like if it dries on polished porcelain tile) you can spray some sealer on it again and wipe it all off. Cleans up nicely.

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

Did you know your grout can look clean? Absolutely! All you need to do is use a mild cleaning agent and remove any existing unsightly stains or soap scum with a little scrubbing. Once any types of contaminants are removed, an application of our AQUA-X Grout Sealer will keep grout cleaner longer while protecting from stains! This product is quick to apply using a sprayer (16 oz includes the spray trigger), and the excess can be easily wiped away with a lint free cloth. This sealer formula is long-lasting, water-based and low odor!

• Keep a clean, NATURAL APPEARANCE and improve the DURABILITY of your grout in your shower, kitchen, bathroom, and tile flooring
• EASILY RINSE OFF Unsightly stains and other dirt after sealing with AQUA-X Grout Sealant due to its MOISTURE BARRIER
• BREATHE EASY when applying this sealer due to NO FOUL ODOR and LOW VOCs
• Your money goes farther with this product with our AMAZING COVERAGE RATE up to 75 square feet per 16 ounces, per coat, and up to 5 years before resealing
• EASY SPRAY ON APPLICATION

User questions & answers

Question:	What do you recommend for regular maintenance cleaning after application? For example, right now I use a magic eraser. Is that too harsh
Answer:	No that is not too harsh. The AQUA X grout sealer should make routine cleaning much easier. Where you had to scrub, you may now just have to wipe away. But a magic eraser is fine.
Question:	So do I just spray over all my grout (and tiles) and wipe off the tiles afterwards? I don't want to discolor my tiles or have a sticky residue
Answer:	I’d do a test tile first if you have left over tile from the install. I prefer to get a tile grout sealer bottle (Home Depot or Lowe’s) with a small brush or wheel on it & pour the liquid in spray bottle into the sealer bottle & apply with that. Have a damp rag handy to wipe off any sealer that gets on tile. Follow the directions on the bottle thereafter. Our tile didn’t need to be sealed, so we just sealed the grout lines.
Question:	can this product be used on grouted glass subway tiles
Answer:	Thanks for your interest in our products! The AQUA-X Grout Sealer will work great on grout glass subway tiles. Since the tiles are glazed, the AQUA-X Grout Sealer won't seal the tiles, just the grout. Just spray the sealer on the grout/tile and use a lint free cloth to get the excess sealer off the tile.
Question:	We just installed mexican tile in our mudroom. the tiles were sealed prior to grouting. can i use this on the tiles as well or only grout lines
Answer:	Thanks for your interest in our products! You can use our grout sealer on tiles as well as grout. If the tiles are already sealed, then the AQUA-X Grout Sealer won't be able to penetrate into the tiles. It won't hurt the tiles either, so when spraying the grout just wipe the excess sealer off the tiles for an easy cleanup.

• ✔ PROFESSIONAL STRENGTH GROUT & NATURAL STONE SEALER: Used by professional tile & grout cleaners throughout the country.
• ✔ WATER BASED SEALER: Virtually no odor at all, Penetrates deep into the grout or stone without changing the look of the surface at all.
• ✔ VERY EASY TO USE: Apply while standing up, Just apply with a paint brush taped to a broom pole, let sit sit for 5 minutes, then mop the remaining sealer off with a clean mop. Easy and Quick!
• ✔ VERY LONG LASTING FORMULA

User questions & answers

Question:	Do you have to keep the sealer off of glass? I make a glass mosaic using grout for a backsplash and I don't want to ruin the glass
Answer:	I don't know. Likely not if the color isn't on the surface. Test it on a small area.
Question:	I've applied 4 coats but the grout is still absorbing water. Does this mean i need additional coats? It beads initially
Answer:	I don’t think this product is supposed to create an impenetrable seal that water can’t get into. My understanding is it’s supposed to protect it from stains not seal it totally. I could be wrong though.
Question:	How do I use this on granite
Answer:	You just pour on the counter top evenly, wait 5 to 10 minutes and then wipe off with a clean towel or microfiber cloth. If you want extra protection you can apply twice.
Question:	can this be used on grout that has been painted with grout re-color
Answer:	No. If your grout has been painted with a color seal it will not need to be sealed with any grout sealer. Grout color seals put a thin layer of "paint" on top of the grout that will not allow clear penetrating sealer to soak into the grout.

Product features

Grout-eez Tile & Grout Cleaner

✔️ 2 IN 1 GROUT CLEANER: Removes the top layer of grease and grime then penetrates deep into the grout to remove set-in stains.

✔️ DESIRED RESULTS IN JUST MINUTES: With grout-eez all you have to do is spray it on your grout and wait for 5 - 10 minutes to start scrubbing away all the grease and grime and making your floor or shower look like new!

✔️ SAFE TO USE ON WHITE & COLORED GROUT: No matter what the original color of your grout is it will not damage or harm that, after using grout-eez and scrubbing you may even find out you didn't even know what the true original color was!

✔️ VERY LOW ODOR: This is a heavy duty grout cleaner used by professionals and the fact that is has very low odor when most of the products proffesonals use are extremly strong when it comes to smell is impressive.

✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!

Grout & Natural Stone Sealer

✔️ PROFESSIONAL STRENGTH: Our Stone and grout Sealer work on sanded and unsanded grout. This Professional strength sealer improves durability and keeps a natural appearance to your grout. 1 quart will seal up to 500 sq ft of tile and grout. It can also be used to seal any and Natural stone.

✔️ WATER BASED SEALER: Virtually no odor at all. Penetrates deep into the grout lines providing a moisture barrier that will protect your grout from dirt and spills.

✔️ VERY EASY TO USE: You don’t have to get down on your hands and knees to seal your grout. Just take a paintbrush and tape it to a broom pole. Apply while standing up. Let the product sit for 5 minutes, then just mop the remaining sealer of using warm water and a clean mop.

✔️ LONG LASTING: easy to clean and long-lasting protection. ( We recommend using a Neutral PH cleaner to maintain your floors once they are sealed, this will prevent the sealer from breaking down, which will make your sealer last a lot longer).

Daily Floor Cleaner

✔️ MULTIPURPOSE USE: Daily-eez works on all Hard surfaces around your home! Safe to use on Hardwood Floors, Laminate, Tile, Marble, Vinyl. Travertine, Slate, and other Stone Floors.

✔️ AMAZING RESULTS: Daily-eez will remove spills, dirt, and dust from your floor. It can be used Daily, Weekly, or Monthly, whenever you like to clean your floors.

✔️ STREAK FREE: You will never see Streaks or Haze on your floors after you use Daily-eez. It is a Neutral PH cleaner so it won’t break down your sealer, on your tile and grout or Natural Stone.

✔️ EASY TO USE: Just spray on your floor and wipe away!

✔️ SAFE: Daily-eez is safe to use around children and pets.

✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA

Stain & Odor Remover

✔️ DESIGNED TO ELIMINATE ORGANIC STAINS & ODORS: Easily removes stains such as urine, feces, vomit, wine, blood, etc. It also removes odors from any surface you can think of like carpet, hardwood floors, garbage disposals, garbage cans, etc.

✔️ NEW TECHNOLOGY! PROBIOTIC & ENZYMES WORK TOGETHER: This new technology changes everything you ever knew about how to get rid of stains! The enzymes break down the stain as the probiotic eats it away! I like to think if it as if the enzyme is the fork and knife for the probiotic!

✔️ SAFE FOR CHILDREN AND PETS: This product is safe for kids and pets to be around, no harmful chemicals what so ever! So you can have the peace of mind of it not hurting anything or anyone, which to us is one of the most important things about this product!

✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!

Granite Cleaner & Sealer

✔️ BEST IN STONE CARE: Our 24 OZ 2 bottle set of our Seal-eez & Shine-eez is the best care you can give your countertop or vanity! They are specifically designed to work together after you seal your granite, marble, or quartz countertop use Shine-eez you maintain your sealer to make it last the longest amount of time. Apply sealer annually

✔️ SEALER: Protects against all water & oil-based stains. It also will allow you to easily clean all types of foods, grease, wine, coffee stains, & soap scum!

✔️ CLEANER & POLISH: Our product adds depth & shine to your beautiful countertops along with cleaning your everyday spills and messes! Cleans Corian, slate, quartz, & marble vanities & Countertops

✔️ FREE: Comes with a free microfiber towel to apply your sealer & then use it to do daily cleanings and polishing to your stone!

✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA

Product description

Aqua Mix Sealer's Choice Gold is a premium, no-sheen, natural look, water-based, penetrating sealer formulated to provide maximum stain protection, especially moisture vapor transmission. It is also an excellent Grout Sealer.

From the Manufacturer

Aquamix sealers choice gold is a premium no-sheen, natural look, penetrating sealer formulated to provide maximum stain protection. Excellent in food preparation areas. May also be used as a grout pre-sealer or grout sealer. Use on all natural stone (such as granite, marble, travertine and limestone), porcelain tile, ceramic tile, terra cotta, saltillo, cement and any other porous tile or grout where a natural look is desired. Effective for interior and exterior applications. Lasts up to 15-Year.

• Aqua Mix Sealer's Choice Gold is a no-sheen, natural look, penetrating sealer
• Water-Based Formula is a world-wide best seller
• Ideal for granite, limestone, marble, slate, travertine, porcelain, saltillo, cement, and masonry
• Designed for use in food prep and serving areas, and as a pre-grouting sealer
• Provides stain protection and maintains the look of natural stone and porous tile

User questions & answers

Question:	Does this product waterproof cementious grout
Answer:	Yes it does. After you put sealer on and let it dry for a day or two , put some water on grout and it should bead up , like water on a waxed car does.
Question:	Can I use sealer on natural STONE tile? which doesn't have glaze-finish
Answer:	product description and label clearly state it is made to be used on porous stone and tile like granite, travertine, marble etc. as well as grout which I used it on with excellent results.
Question:	Did this darken the color of the grout and give it a "wet" look
Answer:	We used it on a lighter colored grout and did not see any darkening or a wet look. We were very happy with the product and it's worked well so far
Question:	After applying one coat on tile floors want to know if there is a wait time before cleaning with Bona tile cleaner? Thanks
Answer:	Clean your grout lines FIRST, before applying a sealer of any kind. You never want to apply a sealer over dirty or discolored grout. They will remain that way! In my experience, I can recommend "Fresh Start 2000" as the best grout cleaner. Mix it with water. Use a spray bottle to apply. Scrub with a small stiff brush. Simple and easy to use and it will make your grout look new again. Full cure time for Aqua Mix Gold is 24 hours. Allow 30 minutes drying time between coats if applying more than 1 coat. Ready for surface traffic in 2 hours after final coat. Keep grout lines dry for 12 hours after final coat. Aqua Mix Gold penetrates grout. I recommend 2 coats for a long lasting protective seal. I hope this answers your questions.

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

From the Manufacturer

511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 1,000 square feet per quart
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

GROUT PROOF is a grout sealer spray that protects cementitious grout joints against stains and makes cleaning fast and easy. It can be used both indoors and outdoors.



ADVANTAGES:



• Easy-to-use: just spray on the grout joint.

• Eco-friendly: water based.

• Dual-action: protects cementitious grout joints and makes cleaning easier.

• Does not alter grout joint color.

• Odorless.

• Fast drying.

• VOC free: contributes towards LEED credits.

• PFOA free: non carcinogenic.



HOW TO USE IT:



Spray GROUT PROOF directly on the grout and spread it evenly with a small brush. The surface can be walked on after 4 hours.



Caution: Immediately remove any excess product on the tile with a clean cloth or paper towel. Keep out of reach of children.



FILA has been caring for the beauty of surfaces since 1943.

That’s why we are unwavering in our commitment to using innovative methods and products to maintain surfaces over time – because we firmly believe that surface care directly contributes to the wellness of spaces and the people who inhabit them.

• Grout sealer that protects cementitious grout joints and prevents stains.
• Protects cementitious grout joints from water and humidity.
• Makes cleaning fast and easy.
• Perfect for mosaics
• Keeps grout joints looking new for years.
• Can be used both indoors and outdoors.
• Water based.
• Why should you choose FILA? Because FILA products work. Used in the most prestigious architectural projects worldwide, FILA cleaners and sealers are recommended by more than 200 stone and tile manufacturers. Trusted professionals use FILA and rely on our technical assistance for the most effective surface care solutions.

User questions & answers

Question:	Will this damage or discolor glass and not ferrous metal
Answer:	No you can wipe it off.
Question:	Can it be poured into a applicator bottle and be rolled on with the same results vs spray on
Answer:	Good morning, we suggest to use the product with its bottle because it was studied for its best use, Kind Regards, FILA Technical Department
Question:	How long does it take to dry
Answer:	Generally, one hour is enough, even if we suggest to wait 8 hours before using water on the surface. Kind Regards, Technical Department
Question:	Does it contain silicone
Answer:	Good afternoon, no it doesn't. Kind Regards

Product features

GROUT PROOF Spray - Grout Sealer

• Protects cementitious grout joints from water and humidity.
• Makes cleaning fast and easy.
• Perfect for mosaics.
• Seals cementitious grout joints and prevents stains.

• IN STOCK-SHIPS FAST: Less Cleaning And More Living. Seal It Green Xtreme Grout Sealer Makes Cleaning A Breeze By Blocking Black Spot Stains And Dirt And Grime. No More Ugly Shower Or Kitchen Grout, Granite, Marble, Stone Or Tile
• SEALS & PROTECTS GROUT, GRANITE, TILE, MARBLE & NATURAL STONE. For Use In Kitchens, Bathrooms, Showers & Outdoor Living Areas. Preserves The Natural Look And Makes The Surface Bulletproof To Stains
• NON-TOXIC-NO TOXIC SOLVENTS, FUMES OR FLUOROPOLYMERS. Zero VOC's And Water Based With Plant Based Surfactants. Professional Formulation
• INDOOR/OUTDOOR TREATMENT. Easy To Apply Spray On. UV Resistant & Transparent. Protects Grout, Granite, Tile & Natural Stone In Showers, Kitchens And Out Door Living Areas. Unique Ingredients Will Never Yellow, Crack Or Peel. Or Your Money Back
• BRAND NEW TO AMAZON. In Stock And FAST Shipping. You Can Now Buy What The Pro's Use And Get The Results They Get. Easy DIY Spray. You Will Love The Results Or Your Money Back. COVERS UP TO 100 Square Feet

User questions & answers

Question:	How long do you have to let dry before use
Answer:	As long as possible but At least 4 hours.
Question:	Can this be used in reptile tanks? Im using sanded ground on a backboard for a gargole gecko and want to know if its safe for her to be on after it dr
Answer:	Great question. After it dries it will permanently bond to the surface and not leach into the tank. It is important to apply it, let it completely dry and “cure” for about 2 hours. Then wipe the surface with a wet rag Or rinse with water if possible to remove any residual sealer. It is unlikely to harm the gecko even when wet however, we don’t test it for safety on all animal types. We use the same technology for testing freshwater fish tanks to keep them clean so it has undergone difficult to pass safety tests for aquatic life. One Side benefit of the technology is that it will help reduce or eliminate odors.
Question:	Does this product use Rosemary
Answer:	No it does not contain any rosemary.
Question:	Does it permanently darken the grout
Answer:	Great question. No. It is designed to not change the color or look of the grout or tiles. I would suggest however, to test it in a small area to ensure you like the results.
Question:	I am grouting seashells into a design project. Can this be brushed over them while sealing the abstract lines
Answer:	This should seal any grout.
Question:	How long will this grout sealer last
Answer:	This should last 1-3 years depending on traffic and the types of cleaners used to maintain it.
Question:	Can this be used on travertine stone tile and sanded grout lines without damaging or etching the travertine
Answer:	I put some on my quartz countertop in an inconspicuous spot. No damage. Put it on grout between travertine back splash and quartz and I didn’t see any marks.
Question:	why is everyone reviewing the cleaner on the sealer listing? Anyone on the sealer
Answer:	The cleaner is great. Don't know the sealer.

Product description

Homax Series 9324 22 oz. Silicone Grout Sealer

• Safely Seals And Protects Ceramic Tile Grout Lines
• Resists Soiling, Mildew And Water Penetration
• Trigger Spray
• Brand Name: Homax

User questions & answers

Question:	Does it dry glossy? High shine
Answer:	Mine did not, following the instructions I couldn't tell it was there. In fact was worried I was wiping it all off. But 3 coats in the water was beading up and not soaking in perfectly. I also have slightly off white tile with slightly off white grout.
Question:	how long does it last? How often do you need to re-apply it
Answer:	Mine has been applied for a year and still seems to repel the water. I ended up having to do 4 coats before it seemed to be doing great. (really 3 coats was enough, but I chose to do a 4th because I figured it couldn't hurt)
Question:	Can it be applied to tile
Answer:	It gets applied to the tile and grout since it is a spray. Did not leave a noticeable film on the tile.
Question:	Does it seal grouted porcelain tile
Answer:	I had to do 4 coats when I did mine and it worked great.

• SIMPLE SOLUTION: Skip scrubbing tiles and use a grout pen to clean, whiten, and recolor your grout
• USE ANYWHERE: Ideal for the bathroom, kitchen, and any other room that has floor or ceiling tiles
• LONG LASTING INK: Tackle small or large DIY projects with a pen that covers up to 60 meters of grout
• RICH PIGMENTS: Grout paint markers available in 11 different colors with reversible 5mm or 15mm nibs
• ADVANCED FORMULA: Non-toxic, water-based ink that helps protect against dark spots and stains

User questions & answers

Question:	does it work on marble tiles grout
Answer:	I am not sure, I'd see what the instructions say or contact the manufacture. I used it on a standard mixture tile grout and it worked great.
Question:	Does it work on silicone caulk
Answer:	Silicone caulk is not paintable so this product would likely not work on it.
Question:	Can you put sealer over it
Answer:	Nope. It looked beautiful until I put a sealer over it. (I should have searched for "sealer" before I even bought it. :-( ) Don't waste your money.
Question:	Is this product waterproof or will it wash away if I apply it to the shower floor tiles? tia
Answer:	I have used it on 'wet areas' such as around the basin and also the tiles above the sink with no problems. Just made sure the areas were dry first and then after applying let it dry and also used a small heater placed about 1.5M away from it to 'bake' it in for an hour. Still looks white and new. Haven't used it on shower floor tiles though!

Product description

Sealers provide numerous benefits for tiles and natural stone. Depending on the effectiveness of the sealer used and the efficiency of the application, sealers, especially penetrating sealers can provide long-lasting protection to both tile and natural stone surfaces. An excellent sealer can resist not only water but also oils and grease, algae, mold and mildew, soap scum, lime deposits, salt erosion, frost weathering, and salt damage. Several sealer brands also provide added traction and hardness on the surface. But the benefits of penetrating sealers won't mean anything if they aren't properly applied on the surface. Don't even start about the hard to remove sealer residue! You'll need the right tools for the job. Whether you are using topical sealers, penetrating sealants/permanent coatings, or impregnating sealant, you'll need a dependable applicator that is suitable for both water-based and solvent-based sealants. These microfiber tile sealer applicator pads are suitable for both water-based and solvent-based sealants. Providing both convenience and efficiency, these pads work excellently on the following types of tiles: Ceramic tiles Porcelain tiles Mosaic tiles Terrazzo tiles Saltillo tiles Quarry tiles Glass tiles Acrylic tiles Natural stone tiles benefit the most from sealers, especially from penetrating and impregnating sealants but they also need constant maintenance. Several types of stone require sealing every six months and it's easy to mess up the sealer application. It's a good thing that this microfiber sealer applicator works well with different natural stone surfaces including: Marble Granite Travertine Limestone Slate Sandstone Cantera Shell stone Bluestone Lapis lazuli The pads are very absorbent and as it has a lint-free microfiber cover, it won't shed ensuring that no applicator debris will seal into the surface. It's also very durable, resisting wear and tear even when used on rough surfaces.

• PERFECT SEALER APPLICATOR TOOL FOR STONE, TILE, AND MORE - It's difficult to find a sealant applicator tool that works consistently well with a wide range of materials. Thankfully, this microfiber tile sealer applicator pad works well on glazed and unglazed tiles including ceramic and terrazzo tiles; and natural stones like marble and granite. Aside from this, the tile sealer applicator pad also for sealing concrete.
• MORE EFFICIENT THAN OTHER SEALER APPLICATOR TOOLS - It's not that hard to apply sealant but it's also not that easy. A lot can go wrong and you'll end up with a poorly sealed floor or wall. What these microfiber pads can accomplish that other sealant applicators can't, is that it can easily get into curves, tight spots, and problem areas.
• PREMIUM QUALITY MATERIALS - Trust on a product that will not only get the job done but also do the job best. Made from 100% lint-free microfiber with a sponge foam insert, these sealant applicator pads are suitable for use on both water and solvent-based sealers.
• GREAT VALUE 6-PACK MICROFIBER APPLICATOR PADS - We're not just talking about 6 pads. This package includes 6 large (5" x 4" x 1") microfiber sealer applicator pads. Never run out of applicator pads again!
• CUSTOMER-TRUSTED BRAND - Shop without worries. Our 30-day hassle-free return and exchange policy will have your back.

Product description

Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for at least 72 hours prior to application. Be sure surface is clean, thoroughly dry and free of waxes and coatings. Surface temperature should be between 50°F and 80°F (10°C and 26.7°C) before sealing. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until treated surface is dry. Expected wear is up to 5 years on interior surfaces and up to 3 years on exterior surfaces. Coverage is up to 1,000 linear ft per gallon, depending on porosity of surface.

• Heavy duty protection against oil- and water-based stains
• Water-based formula protects grout and makes cleaning easier
• Specially designed for application to cement-based grout with natural stone, ceramic, and porcelain tile
• Preserves natural look in both outdoor and indoor use
• Covers up to 1,000 linear ft. per gallon

User questions & answers

Question:	Can I put this in checked baggage on an airplane
Answer:	No. Have it shipped to wherever it needs to be applied.
Question:	will this seal sandstone
Answer:	My experience with the StoneTech products is they don't seal anything. Very expensive, tried different products and none worked.
Question:	Can this be used on a backsplash with white glass subway tile? Does it have an odor? If so how long does it smell
Answer:	1) Yes let it set for 5 minutes they wipe off....2) Hardly any noticeable smell...its water soluble so it really does not have any long lasting odor...
Question:	About how many square feet of will this cover? I understand it depends on the tile size and the actual amount of grout
Answer:	We have 20x20 tile on about 1200 sq. ft. in our new house. Two applications on ours and two applications on our neighbor's (same size) with about 1/3 left. So 6000 sq. ft. of tile coverage or more on this size of tile. It will depend on tile size with smaller tiles having more grout but it works great and it's fairly easy to apply....I used a roller applicator.

Product description

Miracle tile, stone and grout sealer penetrates into the pores of the surface to form a barrier that is resistant to moisture and stains while allowing complete vapor transmission. Ideal for interior and exterior, kitchen, showers, bathrooms, patios, health, driveways, garages and facilities. It is an entry-level alternative to impregnating/penetrating sealers. It is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery. It can be used on both interior and exterior applications. Independent laboratory tests show tile, stone and grout sealer outperforms competitive products. Always protect neighboring surfaces including wood, carpet, metal, landscaping and other non masonry surfaces. Coverage will vary depending on the density, porosity, texture, surface absorption, weather, time solution left on surface and application methods. Used as directed, Tile, Stone and Grout Sealer will cover between 500 - 1,500 sq.ft. per gallon (45 - 135 square meters per 3.785 liters). It will be dry to the touch in 1 - 3 hours and may be put into service. For optimum results the area should be kept dry and free from staining materials for 24 - 72 hours. Store in the original container, properly sealed to avoid contamination and evaporation. Stored at 77 degree F (25 degree C), Tile, Stone and Grout Sealer will have a shelf life of 12 months. Do not allow to freeze. Keep out of reach of children.

• Protection for grout, ceramic tile, quarry tile, marble, granite, terrazzo, concrete, brick and masonry
• Interior and exterior use
• Safe for food areas and superior coverage
• Stain resistant and weather resistant
• Easy to use

User questions & answers

Question:	Would this be appropriate to seal travertine tiles that are going to be used as coasters? I'd like the travertine to remain absorbent
Answer:	Hello-If you are looking to keep the travertine absorbent, then you would not want to seal the stone at all. As any sealant applied to it will repel liquids at the surface.Thank You-MSCTechnical Support Team
Question:	Is this product appropriate for weekly cleaning of porcelain tile and grout...particularly Power Grout
Answer:	Hello,The Tile & Stone Sealer is not a cleaner, Tile & Stone Sealer is a penetrating sealer . If you are looking for a cleaner we have one called Tile & Stone Cleaner, If you have any other questions please let me know.Thank you Miracle Sealants Technical Support Team.
Question:	Can I use this to seal porous stone tiles that I want to install over my shower
Answer:	The best product to use on a porous stone would be using the 511 Porous plus. The Tile & Stone sealer is a good product but it is made for more of a dense surface.
Question:	Can I use this on faux flagstone (cement covered with a textured flagstone "look")? Also this is outside in direct sunlight...will this yellow
Answer:	Hello-Yes, our Tile and Stone Sealer can be used on that substrate in an exterior environment. It is a penetrating sealer so it cannot yellow as it is sub-surface.Please be certain to conduct all appropriate tests to determine suitability of its intended use.Thank You-MSCTechnical Support Team