14 best tile and grout sealers

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 500 square feet per pint
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

User questions & answers

Question:	Does this product off gas VOCs? I can’t seem to find an ingredient list
Answer:	no
Question:	How long for drying
Answer:	1 hour
Question:	Can this product be used on Porcelaine tile
Answer:	I don't see why you would want to -- marble and stone are porous so need sealant, porcelain is not, so shouldn't need it
Question:	how do you clean up after
Answer:	After a few minutes wipe off excess with dry cotton towel. If you miss any (like if it dries on polished porcelain tile) you can spray some sealer on it again and wipe it all off. Cleans up nicely.

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

From the Manufacturer

511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 1,000 square feet per quart
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

Miracle Sealants 511 Spray-On Grout Sealer is a fast and easy way to seal tile grout. Unique spray-on sealer provides an invisible barrier that is resistant to oil, stains and water absorption. It does not change the natural look of the grout. Works on interior and exterior new and old tile grout surfaces to penetrate, protect and seal.

From the Manufacturer

Miracle 511 Spray-On Grout Sealer is a new fast and easy way to seal tile grout. This unique spray-on sealer provides an invisible barrier that is resistant to oil, stains and water absorption.

• Use indoor or out on sanded or un-sanded new grout, old grout or natural stone multi-hard surfaces
• Formula designed for maximum stain protection of all cementitious grout
• Covers up to 250 linear square feet per can and may be applied as little as 2 hours after grouting surface
• Penetrates and seals grout in a quick, convenient, easy to use spray application
• UV transparent, will not yellow and resists weather elements

User questions & answers

Question:	What is the best way to apply it if basically your whole house needs the sealant
Answer:	It is a spray so would be tough doing the whole house
Question:	If you applied this in a daily-use shower, how long has it lasted before water stopped beading on the grout and you needed to reseal
Answer:	Couple of years.
Question:	Can this be used after using a grout pen
Answer:	I am not positive, but I would imagine allowing the grout pen drying for 24 hours it would be fine. This product was recommended by the contractor that laid my tile and what he uses.
Question:	Can I use it on quartz as sealant
Answer:	I am not sure. I used it on ceramic tile grout and it worked great. It does say it can be used on natural stone.

Product features

Miracle Sealants Grout Aerosol Spray Penetrating Sealers, 15 oz

511 Spray-On Grout Sealer is a fast and easy way to seal tile and stone grout. It provides an invisible barrier resistant to oil, stains, and water absorption. It can be applied as soon as 2 hours after grouting. If applying to existing grout, it needs to be clean, dry and free of any sealers or coatings.

Uses: Sanded and un-sanded cementitious grout joints on tile & stone installations. One can seals 250 linear feet of grout (approximately 125 square feet of installed tile).

Product description

AQUAMIX SEALERS CHOICE GOLD is a premium, no-sheen, natural-look, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. The NEW Rapid Cure Formula protects in less than 4 hours and is designed to achieve optimal penetration into dense, low-porosity surfaces. May also be used as a pre-grouting sealer over clean stone surfaces a minimum of 1 hour prior to grouting. Allows moisture vapor transmission. It is also an excellent grout sealer. Uses: Use on all natural stone (such as marble, granite, slate, travertine, and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired. Effective for interior and exterior applications. Coverage: Approximately 300 to 1,500 sq. ft. per coat per gallon, depending on type of stone, porosity and texture of surface, temperature, humidity and method of application. Expected Wear: Will vary depending on hardness and texture of surface, type of area, surface wear, frequency and type of maintenance products used. Expected wear is up to 15 years. Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent-based cleaners will affect wear.

• Use on all natural stone & tile
• Expected wear up to 15 years
• Water-based penetrating sealer with new rapid cure formula
• No-sheen, natural-look
• Effective for interior and exterior applications.

User questions & answers

Question:	directions to mix? The back label has come off my bottle
Answer:	We are not sure, but we believe this kit will fit.
Question:	Can i use this on shower floor made of natural river rocks
Answer:	This Kenmore is made by Whirlpool. I have a similar Whirlpool and these definitely should work. I recommend replacing them all at the same time so yes, I would buy the full kit. The refrigerator side is not bad, you just have to remember that on the freezer side, the water hose goes through this on the bottom hings so you'll have to disconnect the hose below the hinge (if I remember correctly) before you pull the door off.
Question:	How many sq feet does this cover
Answer:	Yes, the parts will fit for Kenmore 10644263600 model.
Question:	How did you yourself apply this product and we're you sealing grout only or granite counter top
Answer:	Yes, this kit will work on a left hand door too.

Product description

Aqua Mix Sealer's Choice Gold is a premium, no-sheen, natural look, water-based, penetrating sealer formulated to provide maximum stain protection, especially moisture vapor transmission. It is also an excellent Grout Sealer.

From the Manufacturer

Aquamix sealers choice gold is a premium no-sheen, natural look, penetrating sealer formulated to provide maximum stain protection. Excellent in food preparation areas. May also be used as a grout pre-sealer or grout sealer. Use on all natural stone (such as granite, marble, travertine and limestone), porcelain tile, ceramic tile, terra cotta, saltillo, cement and any other porous tile or grout where a natural look is desired. Effective for interior and exterior applications. Lasts up to 15-Year.

• Aqua Mix Sealer's Choice Gold is a no-sheen, natural look, penetrating sealer
• Water-Based Formula is a world-wide best seller
• Ideal for granite, limestone, marble, slate, travertine, porcelain, saltillo, cement, and masonry
• Designed for use in food prep and serving areas, and as a pre-grouting sealer
• Provides stain protection and maintains the look of natural stone and porous tile

User questions & answers

Question:	Does this product waterproof cementious grout
Answer:	Yes it does. After you put sealer on and let it dry for a day or two , put some water on grout and it should bead up , like water on a waxed car does.
Question:	Can I use sealer on natural STONE tile? which doesn't have glaze-finish
Answer:	product description and label clearly state it is made to be used on porous stone and tile like granite, travertine, marble etc. as well as grout which I used it on with excellent results.
Question:	Did this darken the color of the grout and give it a "wet" look
Answer:	We used it on a lighter colored grout and did not see any darkening or a wet look. We were very happy with the product and it's worked well so far
Question:	After applying one coat on tile floors want to know if there is a wait time before cleaning with Bona tile cleaner? Thanks
Answer:	Clean your grout lines FIRST, before applying a sealer of any kind. You never want to apply a sealer over dirty or discolored grout. They will remain that way! In my experience, I can recommend "Fresh Start 2000" as the best grout cleaner. Mix it with water. Use a spray bottle to apply. Scrub with a small stiff brush. Simple and easy to use and it will make your grout look new again. Full cure time for Aqua Mix Gold is 24 hours. Allow 30 minutes drying time between coats if applying more than 1 coat. Ready for surface traffic in 2 hours after final coat. Keep grout lines dry for 12 hours after final coat. Aqua Mix Gold penetrates grout. I recommend 2 coats for a long lasting protective seal. I hope this answers your questions.

Product description

Did you know your grout can look clean? Absolutely! All you need to do is use a mild cleaning agent and remove any existing unsightly stains or soap scum with a little scrubbing. Once any types of contaminants are removed, an application of our AQUA-X Grout Sealer will keep grout cleaner longer while protecting from stains! This product is quick to apply using a sprayer (16 oz includes the spray trigger), and the excess can be easily wiped away with a lint free cloth. This sealer formula is long-lasting, water-based and low odor!

• Keep a clean, NATURAL APPEARANCE and improve the DURABILITY of your grout in your shower, kitchen, bathroom, and tile flooring
• EASILY RINSE OFF Unsightly stains and other dirt after sealing with AQUA-X Grout Sealant due to its MOISTURE BARRIER
• BREATHE EASY when applying this sealer due to NO FOUL ODOR and LOW VOCs
• Your money goes farther with this product with our AMAZING COVERAGE RATE up to 75 square feet per 16 ounces, per coat, and up to 5 years before resealing
• EASY SPRAY ON APPLICATION

User questions & answers

Question:	What do you recommend for regular maintenance cleaning after application? For example, right now I use a magic eraser. Is that too harsh
Answer:	No that is not too harsh. The AQUA X grout sealer should make routine cleaning much easier. Where you had to scrub, you may now just have to wipe away. But a magic eraser is fine.
Question:	So do I just spray over all my grout (and tiles) and wipe off the tiles afterwards? I don't want to discolor my tiles or have a sticky residue
Answer:	I’d do a test tile first if you have left over tile from the install. I prefer to get a tile grout sealer bottle (Home Depot or Lowe’s) with a small brush or wheel on it & pour the liquid in spray bottle into the sealer bottle & apply with that. Have a damp rag handy to wipe off any sealer that gets on tile. Follow the directions on the bottle thereafter. Our tile didn’t need to be sealed, so we just sealed the grout lines.
Question:	can this product be used on grouted glass subway tiles
Answer:	Thanks for your interest in our products! The AQUA-X Grout Sealer will work great on grout glass subway tiles. Since the tiles are glazed, the AQUA-X Grout Sealer won't seal the tiles, just the grout. Just spray the sealer on the grout/tile and use a lint free cloth to get the excess sealer off the tile.
Question:	We just installed mexican tile in our mudroom. the tiles were sealed prior to grouting. can i use this on the tiles as well or only grout lines
Answer:	Thanks for your interest in our products! You can use our grout sealer on tiles as well as grout. If the tiles are already sealed, then the AQUA-X Grout Sealer won't be able to penetrate into the tiles. It won't hurt the tiles either, so when spraying the grout just wipe the excess sealer off the tiles for an easy cleanup.

• ✔ PROFESSIONAL STRENGTH GROUT & NATURAL STONE SEALER: Used by professional tile & grout cleaners throughout the country.
• ✔ WATER BASED SEALER: Virtually no odor at all, Penetrates deep into the grout or stone without changing the look of the surface at all.
• ✔ VERY EASY TO USE: Apply while standing up, Just apply with a paint brush taped to a broom pole, let sit sit for 5 minutes, then mop the remaining sealer off with a clean mop. Easy and Quick!
• ✔ VERY LONG LASTING FORMULA

User questions & answers

Question:	Do you have to keep the sealer off of glass? I make a glass mosaic using grout for a backsplash and I don't want to ruin the glass
Answer:	I don't know. Likely not if the color isn't on the surface. Test it on a small area.
Question:	I've applied 4 coats but the grout is still absorbing water. Does this mean i need additional coats? It beads initially
Answer:	I don’t think this product is supposed to create an impenetrable seal that water can’t get into. My understanding is it’s supposed to protect it from stains not seal it totally. I could be wrong though.
Question:	How do I use this on granite
Answer:	You just pour on the counter top evenly, wait 5 to 10 minutes and then wipe off with a clean towel or microfiber cloth. If you want extra protection you can apply twice.
Question:	can this be used on grout that has been painted with grout re-color
Answer:	No. If your grout has been painted with a color seal it will not need to be sealed with any grout sealer. Grout color seals put a thin layer of "paint" on top of the grout that will not allow clear penetrating sealer to soak into the grout.

Product features

Grout-eez Tile & Grout Cleaner

✔️ 2 IN 1 GROUT CLEANER: Removes the top layer of grease and grime then penetrates deep into the grout to remove set-in stains.

✔️ DESIRED RESULTS IN JUST MINUTES: With grout-eez all you have to do is spray it on your grout and wait for 5 - 10 minutes to start scrubbing away all the grease and grime and making your floor or shower look like new!

✔️ SAFE TO USE ON WHITE & COLORED GROUT: No matter what the original color of your grout is it will not damage or harm that, after using grout-eez and scrubbing you may even find out you didn't even know what the true original color was!

✔️ VERY LOW ODOR: This is a heavy duty grout cleaner used by professionals and the fact that is has very low odor when most of the products proffesonals use are extremly strong when it comes to smell is impressive.

✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!

Grout & Natural Stone Sealer

✔️ PROFESSIONAL STRENGTH: Our Stone and grout Sealer work on sanded and unsanded grout. This Professional strength sealer improves durability and keeps a natural appearance to your grout. 1 quart will seal up to 500 sq ft of tile and grout. It can also be used to seal any and Natural stone.

✔️ WATER BASED SEALER: Virtually no odor at all. Penetrates deep into the grout lines providing a moisture barrier that will protect your grout from dirt and spills.

✔️ VERY EASY TO USE: You don’t have to get down on your hands and knees to seal your grout. Just take a paintbrush and tape it to a broom pole. Apply while standing up. Let the product sit for 5 minutes, then just mop the remaining sealer of using warm water and a clean mop.

✔️ LONG LASTING: easy to clean and long-lasting protection. ( We recommend using a Neutral PH cleaner to maintain your floors once they are sealed, this will prevent the sealer from breaking down, which will make your sealer last a lot longer).

Daily Floor Cleaner

✔️ MULTIPURPOSE USE: Daily-eez works on all Hard surfaces around your home! Safe to use on Hardwood Floors, Laminate, Tile, Marble, Vinyl. Travertine, Slate, and other Stone Floors.

✔️ AMAZING RESULTS: Daily-eez will remove spills, dirt, and dust from your floor. It can be used Daily, Weekly, or Monthly, whenever you like to clean your floors.

✔️ STREAK FREE: You will never see Streaks or Haze on your floors after you use Daily-eez. It is a Neutral PH cleaner so it won’t break down your sealer, on your tile and grout or Natural Stone.

✔️ EASY TO USE: Just spray on your floor and wipe away!

✔️ SAFE: Daily-eez is safe to use around children and pets.

✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA

Stain & Odor Remover

✔️ DESIGNED TO ELIMINATE ORGANIC STAINS & ODORS: Easily removes stains such as urine, feces, vomit, wine, blood, etc. It also removes odors from any surface you can think of like carpet, hardwood floors, garbage disposals, garbage cans, etc.

✔️ NEW TECHNOLOGY! PROBIOTIC & ENZYMES WORK TOGETHER: This new technology changes everything you ever knew about how to get rid of stains! The enzymes break down the stain as the probiotic eats it away! I like to think if it as if the enzyme is the fork and knife for the probiotic!

✔️ SAFE FOR CHILDREN AND PETS: This product is safe for kids and pets to be around, no harmful chemicals what so ever! So you can have the peace of mind of it not hurting anything or anyone, which to us is one of the most important things about this product!

✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!

Granite Cleaner & Sealer

✔️ BEST IN STONE CARE: Our 24 OZ 2 bottle set of our Seal-eez & Shine-eez is the best care you can give your countertop or vanity! They are specifically designed to work together after you seal your granite, marble, or quartz countertop use Shine-eez you maintain your sealer to make it last the longest amount of time. Apply sealer annually

✔️ SEALER: Protects against all water & oil-based stains. It also will allow you to easily clean all types of foods, grease, wine, coffee stains, & soap scum!

✔️ CLEANER & POLISH: Our product adds depth & shine to your beautiful countertops along with cleaning your everyday spills and messes! Cleans Corian, slate, quartz, & marble vanities & Countertops

✔️ FREE: Comes with a free microfiber towel to apply your sealer & then use it to do daily cleanings and polishing to your stone!

✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA

Product description

Ultimate Grout Sealer is recommended for all types of white and colored grout. Provides a long lasting barrier against stains. Covers 200-500 ln.ft per pint. Apply to dry grout and allow to penetrate 2-3 min, completely wipe up any excess from grout and tile. Grout is sealed when sealer no longer penetrates.

From the Manufacturer

Ultimate Grout Sealer is recommended for all types of white and colored grout. Provides a long lasting barrier against stains. Covers 200-500 ln.ft per pint. Apply to dry grout and allow to penetrate 2-3 min, completely wipe up any excess from grout and tile. Grout is sealed when sealer no longer penetrates.

• LONG LASTING Protection- Easy to Apply, just flip up top and apply to grout lines
• WATER-BASED LOW ODOR - Safe for white and colored grout
• PROTECTS AGAINST STAINING from oil, coffee, food, wine and dirt
• MAKES CLEANING EASY, Professional Results just flip up top and apply to grout lines
• MONEY BACK GUARANTEE! Made in the USA

User questions & answers

Question:	I am grouting seashells into a design project. Can this be brushed over them while sealing the abstract lines
Answer:	Unfortunately, the back label is off mine as well. I think you have to take it off to read it in the first place. In any event, the answers below are correct, but there's more info from the manufacturer's website here: http://www.custombuildingproducts.com/products/aqua-mix/sealers/aqua-mix-sealer%E2%80%99s-choice-gold.aspx
Question:	How long will this grout sealer last
Answer:	Natural rocks are pretty much non porous anyway, but this sealer would certainly enhance it. Also important to make sure the grout in between the rocks are approporitely sealed. For sure this is the best sealer I have ever come across.
Question:	Can this be used on travertine stone tile and sanded grout lines without damaging or etching the travertine
Answer:	A little goes a long way. I probably have about 14 feet of granite and I have used this 2 or three times with 2 coats each time.
Question:	why is everyone reviewing the cleaner on the sealer listing? Anyone on the sealer
Answer:	I applied the product myself and I used the product both on grout and granite counter. D.C.

Product description

Homax Series 9324 22 oz. Silicone Grout Sealer

• Safely Seals And Protects Ceramic Tile Grout Lines
• Resists Soiling, Mildew And Water Penetration
• Trigger Spray
• Brand Name: Homax

User questions & answers

Question:	Does it dry glossy? High shine
Answer:	Mine did not, following the instructions I couldn't tell it was there. In fact was worried I was wiping it all off. But 3 coats in the water was beading up and not soaking in perfectly. I also have slightly off white tile with slightly off white grout.
Question:	how long does it last? How often do you need to re-apply it
Answer:	Mine has been applied for a year and still seems to repel the water. I ended up having to do 4 coats before it seemed to be doing great. (really 3 coats was enough, but I chose to do a 4th because I figured it couldn't hurt)
Question:	Can it be applied to tile
Answer:	It gets applied to the tile and grout since it is a spray. Did not leave a noticeable film on the tile.
Question:	Does it seal grouted porcelain tile
Answer:	I had to do 4 coats when I did mine and it worked great.

• IN STOCK-SHIPS FAST: Less Cleaning And More Living. Seal It Green Xtreme Grout Sealer Makes Cleaning A Breeze By Blocking Black Spot Stains And Dirt And Grime. No More Ugly Shower Or Kitchen Grout, Granite, Marble, Stone Or Tile
• SEALS & PROTECTS GROUT, GRANITE, TILE, MARBLE & NATURAL STONE. For Use In Kitchens, Bathrooms, Showers & Outdoor Living Areas. Preserves The Natural Look And Makes The Surface Bulletproof To Stains
• NON-TOXIC-NO TOXIC SOLVENTS, FUMES OR FLUOROPOLYMERS. Zero VOC's And Water Based With Plant Based Surfactants. Professional Formulation
• INDOOR/OUTDOOR TREATMENT. Easy To Apply Spray On. UV Resistant & Transparent. Protects Grout, Granite, Tile & Natural Stone In Showers, Kitchens And Out Door Living Areas. Unique Ingredients Will Never Yellow, Crack Or Peel. Or Your Money Back
• BRAND NEW TO AMAZON. In Stock And FAST Shipping. You Can Now Buy What The Pro's Use And Get The Results They Get. Easy DIY Spray. You Will Love The Results Or Your Money Back. COVERS UP TO 100 Square Feet

User questions & answers

Question:	How long do you have to let dry before use
Answer:	As long as possible but At least 4 hours.
Question:	Can this be used in reptile tanks? Im using sanded ground on a backboard for a gargole gecko and want to know if its safe for her to be on after it dr
Answer:	Great question. After it dries it will permanently bond to the surface and not leach into the tank. It is important to apply it, let it completely dry and “cure” for about 2 hours. Then wipe the surface with a wet rag Or rinse with water if possible to remove any residual sealer. It is unlikely to harm the gecko even when wet however, we don’t test it for safety on all animal types. We use the same technology for testing freshwater fish tanks to keep them clean so it has undergone difficult to pass safety tests for aquatic life. One Side benefit of the technology is that it will help reduce or eliminate odors.
Question:	Does this product use Rosemary
Answer:	No it does not contain any rosemary.
Question:	Does it permanently darken the grout
Answer:	Great question. No. It is designed to not change the color or look of the grout or tiles. I would suggest however, to test it in a small area to ensure you like the results.
Question:	I am grouting seashells into a design project. Can this be brushed over them while sealing the abstract lines
Answer:	This should seal any grout.
Question:	How long will this grout sealer last
Answer:	This should last 1-3 years depending on traffic and the types of cleaners used to maintain it.
Question:	Can this be used on travertine stone tile and sanded grout lines without damaging or etching the travertine
Answer:	I put some on my quartz countertop in an inconspicuous spot. No damage. Put it on grout between travertine back splash and quartz and I didn’t see any marks.
Question:	why is everyone reviewing the cleaner on the sealer listing? Anyone on the sealer
Answer:	The cleaner is great. Don't know the sealer.

Product description

GlazeGuard gloss sealer is a two component, professional grade highly durable water based sealer with extra slip resistance adhesion properties. This lab tested product has been specially developed for sealing ceramic, porcelain and stone tile surfaces. It's easy to apply to achieve a professional appearance for most commercial and DIY projects. GlazeGuard UV stable and completely resistant to abrasions and a very wide range of chemicals. Available in high gloss, satin and matte finishes.

• Commercial grade water based ceramic, porcelain and stone tile surfaces
• Reduces floor care costs, maintains clear gloss look and UV stable
• Slip and chemical resistant, VOC compliant, excellent abrasion resistant & environment safe
• For bathrooms/restrooms, kitchens and dining areas, lobby and hallways, stairs and entrances
• Tile & grout surface, floors & walls, ceramic & porcelain, stone & concrete
• Approximately 500ft²/gallon (12.2 m2 /liter) depending on the size density and porosity of the grout joints

User questions & answers

Question:	How do I clean the brush and roller afterwards? Simply rinse with water? And how to dispose of leftover product
Answer:	This should seal any grout.
Question:	Can you put it on peel and stick tiles
Answer:	This should last 1-3 years depending on traffic and the types of cleaners used to maintain it.
Question:	Can you use a steam cleaner on the porcelain tile once glazeguard is applied
Answer:	I put some on my quartz countertop in an inconspicuous spot. No damage. Put it on grout between travertine back splash and quartz and I didn’t see any marks.
Question:	Does this product have waterproofing properties? Can it be used in a ceramic tiled shower
Answer:	The cleaner is great. Don't know the sealer.

Product description

Tile guard silicone grout sealer is a penetrating sealer that protects against moisture and forms a physical barrier that resists mildew stains. Low odor, water-based formula is easy to apply and can be used on interior or exterior grout. 4.3 oz. Applicator bottle.

• Penetrating sealer protects against moisture and stains; convenient 4.3 oz. Applicator
• Low odor, water-based formula
• Forms a physical barrier to resist mildew stains
• For use on grout between glazed ceramic tiles on interior or exterior surfaces
• Provides 5 year protection and can be easily re-whitened to keep look fresh and new

User questions & answers

Question:	This would reseal freshly cleaned grout correct? I jist cleaned our tile, want to make sure its what i need
Answer:	The GlazeGuard is designed to last on your floor for many years. The product will not easily wash out of rollers and they should be considered disposable. But with that said you can clean out brushes if you wash them thoroughly in water immediately after use. To dispose of any leftover product, mix together the remaining product and then let it dry and harden. Do not cover the container while it is drying so there is room for expansion and so that it will dry up faster. Once the mixed product is hard it is totally inert and can be disposed of in the garbage.
Question:	after how many days you can seal new grout, can i seal my ceramic tile shower wall with this sealer to make it shiny
Answer:	Not its primary or traditional use but Yes Glazeguard will seal peel and stick tile. Make sure tiles are clean and dry.
Question:	sealer
Answer:	Steam cleaning is SO much easier with kids and dogs! Plus we also have a steam shower. I also need to know if this will hold up to steam cleaning? I'd LOVE to seal my kitchen tile. EVERYTHING seams to stick to them. I tried using a wax but lady who cleaned used ammonia and totally dulled the finish in splotches. I will but this if it can be steam cleaned.
Question:	Does this dry clear and non sticky
Answer:	Yes GlazeGuard is extremely water resistant. In order to use on a shower floor the tile fist needs to be cleaned with PreTreat.

Product description

Tile guard penetrating grout sealer seals and protects grout against stains from water and oil-based liquids. Penetrating below the surface, it provides stain protection while also allowing moisture to escape so it can be used 2 weeks after grouting.

• Penetrating sealer protects against moisture and stains; convenient 22 oz. Trigger spray bottle
• Low odor, water-based formula
• Forms a physical barrier to resist mildew stains
• For use on grout between glazed ceramic tiles on interior or exterior surfaces
• Provides 5 year protection and can be easily re-whitened to keep look fresh and new

Product description

Miracle Sealants 511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Porous Plus does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Porous tile and porous stone surfaces treated become harder and less slippery.

From the Manufacturer

511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. 511 Porous Plus forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Porous Plus is not a surface coating and will not alter the natural look. All surfaces are harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, flagstone, terra cotta, limestone, sandstone and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 1,000 square feet per quart
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

Product features

511 Porous Plus

Formulated for porous surfaces, Miracle Sealants 511 Porous Plus penetrates the surface of natural stones like travertine, limestone, slate to provide stain and water protection. Water vapor within surfaces continues to escape, which also makes this product suitable for additional interior/exterior surfaces like concrete, pavers, grout and tiles like Satillo. 511 Porous Plus dries invisible without altering the original look of the surface.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either a Miracle Sealant's applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Porous Plus seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile