12 best garage storage solutions

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

Product description

Color: Black The Berry Ave Organizer Do you have a messy pile of cleaning supplies in your laundry room or closet? Are the gardening tools in your garage or shed in disarray? WORRY NO MORE! See the images above for your solution: the Berry Ave Organizer! Featuring: 11 Storage Spots - 5 1¼ wide auto-adjust slots and 6 retractable hooks. Attractive Design - Our sleek, jet black design looks great anywhere in or out of the house. Endless Uses - Hang brooms, mops, rakes, spray bottles, rags, brushes, dustpans, gloves, dusters, baseball bats, and even pool sticks! Weatherproof - Organizer can be used indoors or outdoors. Quick and Easy Install - Step-by-step instructions make it simple and easy for anyone to install in just minutes! 100% Thrilled Customer ! We stand behind our product with a no questions asked 100% money back ! If you are not happy with your purchase for any reason, simply contact us and we will provide a full refund for your purchase. -Click Add to Cart and get yours now!

• FROM MESS TO HOME DECOR - If you have cleaning supplies taking over your bathroom, kitchen, or garage shelving, declutter with this storage organization system you will want to show off to your guests!
• INDOORS OR OUTDOORS - Tidy up your broom, mop, rakes, tools and more! Perfect for the kitchen, closet, garage, office, great for commercial use, and thanks to the weatherproof design, this holder even works outdoors or on the shed for your garden tools!
• NO-SLIDE - Commercial grade hanger with 35 pound holding capacity! Thanks to the spring loaded, double rubber gripped slots, whether wet mops, dirty rakes or baseball bats, we nothing slips, or your money back.
• RIDICULOUSLY EASY INSTALL - Included with broom holder are all the screws and anchors needed to mount securely, along with clear step-by-step instructions and video that allow even the clumsiest of us can install easily in just minutes!
• 100% THRILLED CUSTOMER - We stand behind our products and service. Introducing our 100% THRILLED , no questions, no limits, no hassle. Just click "Add to Cart" now!

Product description

ABOUT WALLMASTER

WallMaster is a manufacturer specializing in storage tools, hardware, hooks, racks, hangers and other home improvement tools for garage, basement, utility room or shed.

We got this whole vertical organization system to manage everything in order and make more room for you. I wouldn’t say it’s a life saver, but definitely a space saver.

You got requirements, we got solutions for you!

If you want to put everything in a line, I would definitely suggest you take a look at this whole kit of storage organizer system.

It got 6 Steel Hooks and 3 Rails which the hooks can snap on. The best part of it is that you can move the hooks on the rail according to the size of your things.

The double hooks design makes it a perfect organizer for ski boards or snowboards. It’s very easy to install and the whole kit can hold up to 265lb.

SPECIFICATION

Length & Width & Thickness of the Rail: 16in*4in*0.7in

Weight of the Whole Kit: 6.6lb / 3kg

Weight Capacity of the Whole Kit: 265lb / 120kg

Material: Steel

Hole Quantity: 12 Holes

Feature: Expandable Rail & Adjustable Hooks

INCLUDE

3 x 16" Steel Rail

6 x Hooks

12 x Metal Screws

12 x Wall Anchors

• ADJUSTABLE STORAGE SOLUTION → The best part of the garage storage system is that the hooks can snap on the rail and move around on it to meet your actual needs.
• SPACE SAVING → Organize all your gear or tools on the storage rack to free up floor space and provide easy access.
• EASILY RELOCATE→ Garage hooks can be easily repositioned anywhere on tracks of the panel when storage needs change. And fast wall-mount hooks can install in a snap.
• EASY TO INSTALL→ All you need is an electric drill and a level to make sure it’s lined up perfectly while mounting on the wall studs. The hooks can be snapped on to the rail and moved around freely, offering customizability to suit all your needs, including extra wide items such a ladder etc.
• HEAVY DUTY STEEL → Our garage tool storage organizers are well made, you can tell from the quality of the steel and the fine work while processing it. And this garage storage rack can totally hold up to about 265 lb, which make it hold heavy stuffs like chairs, ski board, strollers, shovels, rakes or power tools, garden tools for years. Rubber-coated sleeves prevent the tools from being scratched or from slipping.

Product features

GARAGE STORAGE SOLUTION

This garage organizer is sturdy enough to hold heavy stuffs for years, such as power tools, garden and yard lawn tools, like folded chairs, ladders, shovels, water hoses, brooms, rakes, axes and part of outdoor equipments.

Expandable Racks & Adjustable Hooks

Feel free to move the hooks on the rail to accommodate to the place based on the tools.

Space Saving

Tidy up your garage, shed, basement, kitchen, pantry, craft room, basement, entryway, mudroom and utility room.

Heavy Duty Hooks

Anti-scratch hooks can hold up to about 250lb.

The Whole Package

• 6 * Double Hooks
• 3 * 16inch Rails
• 12 * Metal Screws

Product description

Neatly organize and sort your space with the Seville Classics 24-Bin Commercial Bin Rack System. This patented unit is great for schools, offices, workshops, restaurants, garages or just about anywhere multi-storage separation and containment is needed. The 24-count polypropylene bins (12 medium, 6 large, 6 XL) are made to slide out easily and lock for safety and convenience. The unit comes with 10 removable bin dividers to help separate smaller items and four 3-inch caster wheels which allow you to move the rack with ease. Two of the wheels lock for stationary use and safety. If you are looking for permanent placement, this unit also comes with four leveling feet. This versatile mobile bin rack system is certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for commercial use. Item measures 36-inches by 14.25-inches by 63.5-inches high.

• Solid steel wire shelves with polypropylene tilt-lock bins
• Overall Dimensions: 36” W x 14.25” D x 63.5” H
• 24 durable sliding PP bins (12 medium, 6 large, 6 XL)
• Includes 10 removable bin dividers and labels
• Set of four 3” wheels (two locking)
• Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for home, commercial and and office environments

User questions & answers

Question:	how much weight will it hold
Answer:	I don't know how much it will hold in pounds but I do know it's very heavy duty. I love it. I've got my bins pretty much filled up and it had no problems.
Question:	There are different answers to its size. Can we get the actual product size for this unit please
Answer:	Outside dimensions assembled are 56" high, 36" wide, 14 1/2" deep. Height is with wheels. Does not include any storage bins on very top shelf.
Question:	How wide and deep is it
Answer:	Mine is about 36" wide, 14.5" deep, and 56" tall (including the wheels).
Question:	Is this easy to break down and re-assemble as needed, for mobile retail storage
Answer:	Hello Elizabeth,Thank you for your interest on our Seville Classics bin rack system. There is an easy 5 step process in order to assembly this shelving and place the bins. You may view the manual before your purchase if needed we have them available on our website. However, if you need more information about our item, please contact us directly, we are here to help.Thank you,Customer Service

Product features

Commercial 8-Tier NSF 24-Bin Rack Storage System, Black/Yellow

Store supplies and tools with Seville Classics 8-Tier 24 Bin Rack Shelving system. Unit features 24 bright yellow bins in three different sizes. Bins slide out and lock against the frame for safe, easy access. System is certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in commercial environments. Our shelves are designed for heavy-duty work with industrial-strength steel wire and a platinum epoxy powder coat for defense against corrosion. Ideal for use in garages, warehouses, mail rooms, schools, offices, work centers, and retail environments.

NSF Certified

Rest easy knowing these shelves are certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in dry environments. Designed with multipurpose storage in mind, these shelves are ideal for professional and personal scenarios.

Industrial Strength Steel

Units are constructed of steel wire for reliable, high-capacity storage. Install the included leveling feet for heavy storage – up to 150 lbs. per shelf.

Limited 10-Year Warranty

The warranty protects against original defects in material or workmanship under normal home or office use for the duration of the warranty period.

Black Epoxy Protection

Easy-to-clean and corrosion-resistant, black epoxy coating protects the steel wire material. This ensures your Seville Classics shelving system will stand the test of time.

Assorted Bins

Included are 12 medium bins, 6 large bins, and 4 extra large bins. They slide out and lock for convenience.

Dividers

Use these bin dividers to create the space that you need.

Labels

There are labels included to help you easily identify your things.

Pantry

Put the unit to use storing food goods. Units are certified by the NSF to the NSF/ANSI 2 Food Equipment standard.

Crafts

Slide out bins come in various sizes and are perfect for more than just industrial and commercial use.

Equipment

Store balls, sports gear, tools, and other equipment safely with heavy-duty locking bins.

Product description

A "wall" organizer designed to hold various household objects with handles of varying thickness. Simply insert a handle into a slot and a rounded, gravity controlled, rolling ball automatically adjusts to the handle's thickness and grips it securely. Use in the laundry, garage, garden, utility room, offices, and more. Plastic Mop, Broom, and Long-Handled Tool or Sports Equipment Holder System-Mount on the Wall in Your Home's Kitchen or Garage - Hang Items Securely- Great Storage Idea for Staying Organized-Best Lifetime Guarantee. BR BR titular de la escoba.

• Plastic
• Made in USA or Imported
• superior Quality Tool Rack Holds Mops, Brooms, or Sports Equipment and Storage Tool Rack Storage & Organization for the Home Plastic Hanger for Closet Garage Organizer Shed Organizer Basement Storage (High Quality)Easy release by lifting the handle
• Compact sizing and clean design garage organization systems
• broom organizer wall mount broom organizer rack Rolling balls automatically adjust to each handle's thickness and grips it securely
• Each ball holds up to 7-1/2 pounds of weight

User questions & answers

Question:	How wide is it
Answer:	Don't know where made or shipped from. Sorry.
Question:	How much weight can this hold? I would like to put a Swiffer Bissel on it. And maybe a featherweight bissell vaccuum
Answer:	I don’t no have hockey sticks but think you could hang them from this holder,
Question:	Are there hooks to hang dustpan, etc
Answer:	I didn’t use the self adhesive. I screwed them into the wall.
Question:	how is this attached to the wall by screws
Answer:	The broom holders come attached to two separate metal plates, each with two broom holders. Each metal plate is 10.25 inches long. If holders are installed as in the picture, the overall length is 20.5 inches

Product features

Home- It Mop and Broom Holder, Garage Storage Systems Broom Organizer

A 'wall' organizer designed to hold various household objects with handles of varying thickness. This mounted mop holder is great for saving space，it helps you save with more empty out and can store a lot of size items, make your house look clean and clean. This multi-used storage rack features 5 slots and 6 hooks that can hang most of your kitchen, cleaning, metal, sports and garage hand-held tools securely. When an object falls the anti-slip rubber slot, the rolling ball will automatically adjust to the object's thickness and grip it tightly. Every ball slot of the broom holder can fix the hand-held tools with diameter between 0.68~1.12 inches, and bear the weight up to 7 1/2 lbs, that means it can organize most of tools of your home. But not suitable for some too heavy objects, such as steam mop, wet mop.

Versatile design

Compact sizing and clean design garage organization systems. It can easily hold heavy tools with a no-slip grip, and will also withstand extreme temperatures, so can be used outside and inside.

Multi-functional

Holds Mops, Brooms, or Sports Equipment and Storage Tool Rack Storage & Organization for the Home Plastic Hanger for Closet Garage Organizer Shed Organizer Basement Storage (High Quality) Easy release by lifting the handle.

Easy to install

This mop and broom wall mounted organizer rack need to be drilled and installed to the wall for more stable and stronger capacity. Instruction Manual is included.

• 【PREMIUM QUALITY & NON-SLIP COATING】Made of thick steel, Remiawy steel garage hooks are heavy duty and sturdy. The orange non-slip rubber coating is designed to hold the items firmly, protect their surfaces from getting scratched or marred, and prevent the garage storage hooks from slipping and rusting. Solid steel is not easy to bend and will hold quite a bit of weight if secured properly.
• 【MULTI-FUNCTIONS IN ONE SET OF GARAGE HOOKS】Never have enough room in your garage because of so much stuff? Well, Remiawy garage hanging hooks are the perfect solution to help utilize your vertical storage space more effectively, get everything organized, and find what you need at a glance. Great for ladders, lawn trimmers, gardening equipment,and so much more! Compared with single hooks, our garage storage utility hooks have two holes to easily hold the weight enabling most items to be hung.
• 【VARIOUS SIZES TO FIT ALL NEEDS】There are 12 wall mounted ladder hooks in 5 different sizes: 2 large square type garage hooks, 1 medium square type garage hook, 5 small square type garage hooks, 1 medium J type garage hook and 3 small J type hooks. It also comes with 48 pcs steel screw nails, 24 pcs black wide thread screw plugs and 24 pcs white plastic anchors. The length of the steel screw nail, the black wide thread screw plug and the white plastic anchor is individually 1.18", 1.3" and 1.18"
• 【EASY TO INSTALL & BEARING CAPACITY】 These garage hooks are suitable for plaster, wood, brick, and concrete walls. You can install them effortlessly. For plaster walls, Mark two big holes; Twist the black wide thread screw plug in. For wooden/brick walls, Mark two small holes; Drill a hole and hammer in the white plastic anchor; Twist the steel screw nail into the anchor. The bearing capacity depends on different types of walls; different sizes of tool hooks and screws.
• 【GREAT GIFT & BEST AFTER-SALE SERVICE】An awesome gift for Fathers’ Day or housewarming for someone! All Remiawy garage organizer hooks come with one year guarantee. If any garage hangers are found to be defective or any other problems arise during use, please feel free to contact us. Our customer service executive will be there at your service willing to resolve your issue, whatever it may be.

User questions & answers

Question:	I don't need 12!! i'd like to get just 4 of them .. 2 each of the small and medium 'j' hooks. is this possible? would be appreciated
Answer:	I just saw these same brackets at Home Depot.
Question:	Can these be used with a rubbermaid fasttrack system
Answer:	Dear Customer, Thanks for being interested in Remiawy garage hooks.Our garage hooks couldn’t be used with a rubbermaid fasttrack system.These steel garage hooks are made of thick steel and suitable for plaster, wood, brick, and concrete walls. You can install them effortlessly and do not need to be used with fast-track systems. If there is any other problems,please feel free to contact us through these ways,our customer service executive will be there at your service. Email:[email protected] Phone:+1-929-464-6392 Remiawy Customer Service
Question:	Where are these made
Answer:	Dear customer, Much thanks for your interest in our product. Our Garage Hooks are made in China.Our steel garage hooks are heavy duty and sturdy,it is made of thick steel.The orange non-slip rubber coating is designed to hold the items firmly, protect their surfaces from getting scratched or marred, and prevent the garage storage hooks from slipping and rusting. Solid steel is not easy to bend and will hold quite a bit of weight if secured properly. If you have any problem during use, please feel free to contact us. Our customer service executive will be there at service. We ensure that you will get the complete service and true value of money. Phone:+1-929-464-6392 Remiawy Customer Service
Question:	What is the dimension of the wires used for each of the hooks
Answer:	it's pretty heavy, I can't bend it. we have shovels and rakes on it just fine.

Product features

Easy To Install

• GET ORGANIZED: Use Heavy-Duty Wrap-It Storage Straps for storage and organization in the garage, shed, shop and around the house, boat, camper or RV. Get organized and stay organized. These straps are the best solution for organizing cords, hoses, rope and so much more!
• QUALITY MATERIAL: Made with heavy-duty weatherproof polypropylene, industrial strength hook and loop, and a rust-resistant grommet, these heavy-duty storage straps are built to last—indoors or out. The heavy-duty hook and loop can hold up to 50 lbs / 22kgs (10”-28” sizes).
• HANG IT UP: The rust-resistant metal grommet makes it easy to hang extension cords, hoses, rope and so much more! Get stuff off the ground and get organized in the garage, shop, or shed and around the home, boat, truck or RV. These heavy-duty grommet straps fit garage storage system hooks and are the perfect garage storage and pegboard accessory.
• ENDLESS USES: Use for extension cord storage, cable storage, hose storage, rope storage, garage storage and organization, or as an RV storage solution. Use as a cord wrap, cord keeper, extension cord holder, extension cord organizer, cord bundler, power cord wrap, cord hanger, cord keeper, wire straps, tool strap or as an air hose organizer. Great for organizing garage stuff and boat stuff. Use as an alternative to electric cord reels, hose reels, cable ties and hooks. The uses are endless!
• INCLUDES: two 10-inch x 1.5-inch, two 13-inch x 2-inch, and two 17-inch x 2-inch heavy-duty straps + 30-Day Money-Back Guarantee and 2-Year Warranty

Product features

Stainles Steel Grommet

Makes it easy to hang extension cords, hoses, rope, tools, and so much more! Plus, the grommet is stainless steel so these can be used outdoors and in salt water environments.

Heavy-Duty Polypropylene

Made with high-density polypropylene material so these will hold up to rigorous use indoors and out.

Industrial Strength Hook and Loop

Commercial grade nylon hook and loop allows for a very secure grip and the ability to hold up to 50 lbs!

2-Year Replacement Program

We stand behind the quality of all of our products and offer a 2-year replacement program for our Heavy-Duty Storage Straps!

Product description

Reduce clutter—and reclaim your garage!

Tired of bulky yard equipment, power tools, sports gear and other seasonal stuff taking up precious space in your shed? With the Tool Storage Rack from Righthand, homeowners can neatly organize their accessories in the most efficient manner possible. The easy-to-install rail system safely mounts to most substrate surfaces and features 6 adjustable rubber-coated hooks for supporting shovels, rakes, leaf blowers, weed trimmers, gardening tools, ladders, hammers, hand saws, hoses and more.

Once the heavy-duty steel rail is in place, the hooks slide on and glide left to right for effortless adjustment. Accommodate a variety of odd-shaped items, free up floor space, and securely stow your most expensive equipment up to 800 pounds. Whether you’re tidying a commercial shop, organizing an apartment utility room or looking to systematize a messy man cave, stop racking your brain! Take back ur garage by adding a Tool Storage Rack!

What You Get

• 2 x Steel wall racks [use separately or together]
  
  
• 6 x Universal hooks that slide easily but stay in place
  
  
• Assorted anchors and fasteners for fast installation
  
  
• The ultimate solution for cluttered sheds and garages!

Specs & Details

• Maximum capacity: 800 lbs.
  
  
• Construction: powder-coated steel; epoxy finish
  
  
• Hook sleeves: rubber-coated
  
  
• Limited 1-year warranty
  
  
• Recommended for brick and concrete only; use special hardware for installing to plasterboard or other substrates

How to Hang

• Locate studs in the wall; use a level and mark a horizontal line
  
  
• Position the bottom of the rack on the line (with the top facing up)
  
  
• Adjust so that the mounting holes are lined up with the wall studs
  
  
• Mark a line for the studs, then use provided hardware to install rack
  
  
• Slide the hooks onto either end of the rack
  • THE ULTIMATE GARAGE STORAGE SYSTEM | Universal Hanger Rack Lets You Organize & Store Tools, Lawn Equipment, Bikes, Snow Gear & Other Accessories for a Clutter-Free Garage, Basement, Shed, Utility Room, Shop, Store & Beyond
  • HEAVY DUTY STEEL HANGER RACK | Includes [2] Durable Powder-Coated Rails w/ Epoxy Finish That Won’t Scratch, Rust or Chip Over Time| Use Individual Racks Together or Separately for Multi-functional Convenience on Any Vertical Surface
  • 6 ASSORTED RUBBER-COATED HOOKS | Versatile Storage Hooks Support a Variety of Heavy Items Without Scratching or Other Damage | Sturdy Brackets Glide Effortlessly Onto the Rack & Easily Adjust from Left to Right for Perfect Placement
  • EASY TO INSTALL, EASY TO USE | Simply Mount Rack to Wall Studs Via Included Anchors & Fasteners [According to Wall Material] & Safely Hang Up to 800 Pounds of Gear | Rack is 5X Stronger Than a Regular Shelf—Satisfaction Guaranteed!
  • CUSTOM STORAGE FOR ANY SETTING | Wall Storage Makes an Ideal Choice for Freeing Up Floor Space While Securely Stowing Your Expensive Machinery, Hand & Power Tools, Ski & Sport Gear, Beach Chairs, Backpacks & Other Outdoor Stuff

User questions & answers

Question:	Will this attach to cement garage
Answer:	Not the way it’s received. I put a 4” board behind the rack and screwed the Rack to the board then screwed the whole thing to my drywall. If you drilled your cement holes first then you could anchor it to your cement...
Question:	Where I should this item made
Answer:	Your question does not make sense, sorry!
Question:	Can you buy additional hooks
Answer:	Sorry, additional hooks are not for sale.
Question:	Can this be used in a plastic shed
Answer:	No, you need a 2x4 or like baking to attach the rails.

• High-quality ABS material
• 【IDEAL STORAGE SYSTEM FOR TOOLS】Made of high-quality ABS material, and with the size of 64inch, the adjustable garage hooks is ideal for various tools like rakes, shovel, spade, broom, mop, ladders, chairs, bicycles, brooms, shovels, power tools, and any tool with a rod. Ideal for organizing your home!
• 【MULTI-FUNCTIONAL】Perfect for hanging tools like mops, spades, brooms, shovels, rakes, and other garden tools at the garage, basement, or shed. Or for storage tools with rods at the garage, shed, workshop, closet, basement anywhere else. Easily release by lifting the handle.
• 【Max Capacity 】By adding reinforcing rib on steel plate, each hook of tool organizer bears the weight up to 15LBS(7KG), That means the garage hooks are perfectly capable of organizing most of the tools in your home. And each peg can bear the weight 5LBS(2.5KG).
• 【Last USING FOR YEARS】Made of high-quality aluminum and plastic, and with the sturdy PVC anti-slip coating, easy to grab on to items and keep them securely in place for years, and protect the goods surface from being scratched. Never have to worry about your garage or garden tools falling off again!
• 【PACKAGE LIST】4 x 16inch ABS rail, 16pcs galvanized steel hooks with non-slip vinyl-covered prongs, 20pcs ABS pegs, 4pcs ABS interlock connectors, 20pcs screws, and 20pcs dowels.

User questions & answers

Question:	How long is this garage hook organizer
Answer:	There are 4 plastic rail guide, 16” each, so if you install as individual it will be 16” long, and if you combine 4 of them it will be 64” long. I hope this help.
Question:	Is this sturdy enough to be hung directly on studs without sheetrock or a wall behind? I want to hang it in an unfinished shed
Answer:	I would not recommend it. It's designed to be hung flushed against a wall.
Question:	What size drill bit is recommended
Answer:	Not sure of the size. I used a drill bit smaller then the screw itself.
Question:	I want to buy 4 (same) hooks of this product, can I buy from Amazon? What is the part number
Answer:	There was no parts list, just a description. I love mine.

Product features

Have you ever felt upset by the messy garage tools?

The garage tools hooks can holds mops, rakes, brooms, and can be easily released by lifting the handle.

Use as an individual 16-inch storage unit or combine for up to 64-inch storage length.

This wall-mounted tool holder is great for saving space, and it saves more space out and can store a lot of size items, make your home look much cleaner than before.

This multi-used storage rack features 16 pegs and 20hooks that can hang most of your kitchen, cleaning, metal, sports, and garage hand-held tools securely.

Made of high-quality materials and, our garage tools can hold extremely sturdily for years of use, no need to worry fall off anymore.

Product description

Take your garage or workshop storage to the next level with the Dewalt 4-Foot Tall, 3 Shelf Steel Wire Deck Industrial Storage Rack. The three industrial metal wire grid decks can each support 1,500 lb. for a total 4,500 lb. capacity. That is a staggering two and a quarter tons of DEWALT tough storage power. This ultra-sturdy rack also sports premium features such as top caps and fiberglass-reinforced nylon feet to prevent sliding and floor damage. The industrial powder-coated finish on the steel uprights, support straps, and crossbeams will not fade or chip. Each of the three shelves features a total of five support straps to prevent twisting or spreading under heavy loads and four clips on each shelf to prevent warping. Safety features include locking pins to ensure that the crossbeams stay properly seated and a wall-mount anchor bracket to prevent accidental tipping. The shelves are adjustable in 2.35-inch increments so you can design a shelving unit customized to your needs. You can also easily join multiple racks together vertically or horizontally. Two uprights come with pre-installed horizontal and diagonal support beams for easy setup and assembly. Say goodbye to your plastic shelving and let DEWALT help you achieve the storage setup of your dreams with our ultra-strong, industrial storage solutions. DEWALT believes that a job well done starts with a tool well built. Whether it is a drill, work glove, or storage rack, we are committed to crafting products that exceed your expectations. When you purchase a DEWALT product, you can be confident that it will not only perform to the highest standards but also withstand the harshest job site. We are DEWALT, and we are guaranteed tough.

• MASSIVE CAPACITY - The 3 industrial metal wire decks can each support 1,500 lb. for a total 4,500 lb. capacity
• DURABLE - The industrial powder-coated steel uprights, support straps, and crossbeams won't fade or chip
• NYLON FOOT PADS - Resilient, fiberglass-reinforced nylon feet prevent damaged flooring
• SUPPORT STRAPS - Each shelf is braced by a total of 5 support straps to prevent twisting or spreading under heavy loads
• SAFETY FEATURES - Pins secure crossbeams in place and wall-mounting anchor bracket prevents rack tipping

User questions & answers

Question:	Is this heavy duty
Answer:	Product is very heavy duty. I was pleased with how the wire shelves were supported and assembled. Overall assembly was very easy and quick. I will buy another set in the very near future.
Question:	How wide is it
Answer:	It 48" high, 50" wide and 18" deep.
Question:	Uneven floor, does Dewalt sell self leveling attachments
Answer:	Don't know about any self-leveling attachments. I think my shelving came with a piece to attach it to a wall or stud...I didn't have a leveling problem though so I didn't attach the shelf to the walls of my shed
Question:	What tools do I need to assemble this
Answer:	Thank you for taking the time to reach out! The DeWALT DXST4500 4-Foot Tall, 3 Shelf Steel Wire Deck Industrial Storage Rack requires a 4 mm Hex Key (included) OR 4 mm Hex Bit (included), a Rubber Mallet (not included), and a Flat-Head Screwdriver (not included) to complete assembly. If you have any additional questions, please feel free to reach out to us here at DeWALT Shelving!