13 best garage racks

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

Product description

Color：Black

STORAGE SHELF UNIT 6 TIER METAL RACK ADJUSTABLE STEEL WIRE SHELVES HEAVY DUTY WITH WHEELS

 

☀Attractive Appearance:

Metal rack conforms to modern aesthetic,steel wire made a classical shape.

Wire shelving unit with the black color make itself neat and easy to clean.

The black storage shelf makes your place simple and well-furnished.

 

☀Adjustable Shelves:

Storage shelf’s layer can be set at any height for your individual needs.

Metal Rack could accommodate a variety of items.

Wire Shelving Unit have helped in organizing garage, kitchen, office and so on.

 

☀Excellent quality:

The steel wire of the storage shelf is very durable, so it can hold a lot of things.

The total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers.

Weight limit of each Wire Shelving is 350 pounds when equally distributed on feet levelers.

Maximum entire unit weight capacity is 500lbs when equally distributed on casters.

Dimensions: 48"L x 18"W x78"H (With stationary feet)

Dimensions: 48"L x 18"W x82"H (With Wheels)

storage shelf metal rack wire shelving unit wire shelves heavy duty with wheels 6 tier overall garage layer shelf for pantry kitchen black overall organizer unit durable steel wire layer shelf unit multipurpose unit wheel chrome adjustable shed

 

• ♛【Easy to Assemble】: No assembly tool is needed, it can be assembled freely, metal storage rack and the height of each layer can be adjusted, which can be adjusted to the height or level you want, the operation is very simple. Storage shelf metal rack wire unit
• ♛【Broad Usage】The super storage function metal storage rack can be placed in kitchens, bathrooms, rooms, living rooms, warehouses, offices, industrial, commercial exhibitions, hotels, supermarkets, etc. Metal shelf unit storage rack wire
• ♛【Extremely Durable】Made of heavy steel, it has excellent rust resistance and oxidation resistance. Storage rack the weight limit of each shelf is 350 pounds, and the total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers. Wire unit rack shelf metal storage.
• ♛【Convenient Wheel】The wheels of the shelves are equipped with fixed locks that can be fixed or moved at any time. For example, you can unlock when you need to push the metal storage rack clean or push it into a sunny place. If you want to secure the heavy metal shelf in place, you can lock the lock. Rack wire shelf storage unit metal
• ♛【What You Will Got】We guarantee that you will like this metal storage rack. If you are not satisfied with this storage rack, please contact us! If you have any questions, please feel free to ask! Perfect Christmas and Thanksgiving gift for your friends and relatives.

Product features

Durable and Sturdy

This shelf unit is very durable and sturdy, it can hold 350 lbs per shelf when equally distributed on feet levers, and the weight limit of each per shelf with wheels is 220 pounds. It’s very stable that you can put things on it and needn’t worry about it may be shake.

Commercial Wheels

Casters are very sturdy and high quality, easy to move it allow for easy positioning in the kitchen, garage, or office.

Modern Appearance

Stylish six-shelf shelving unit offers the best of both rugged reliability and modern appeal and the smooth surface makes it easy to clean.

Heavy Steel Pipe

Constructed of durable steel with a classical black finish, the heavy steel pipe can hold on many things.

Adjustable-Height shelves

Raise the shelf and move all four sleeves to a new position for more or less height, as desired, meet your different needs.

Adjustable feet

Adjustable leveling feet allow the unit to be placed on uneven ground--a simple twist is all it takes to stabilize.

High Bearing Capacity

The dimension of the each per shelf unit is 48"L x 18"W, so it big enough for you to put lots of things to store.

Product description

About Walmann

Walmann is a manufacturer specializing in all exercise related products, such as Bicycles, Skis, Pull up bars, golf etc, including but not limited to storage solutions and training accessories.

About this bike storage hooks

We have all the vertical garage storage system to organize everything in order and save more space for you. Our bicycle rack for garage provide the perfect space saving solutions!

Cycling is an exciting sport, however, storing the bikes could sometimes be a headache without a proper solution! Luckily, with our wall-mounted bike storage racks for garage, you can easily organize the bikes and solve the space problem immediately. Simple installation with top-notch safety hook can be right in your hands without breaking the bank!

SPECIFIC FEATURES

Garage Bike Rack Wall Mount Material: Heavy-duty Steel

Length & Width & Height: 16.9in*12.9in*2.7in

Bike Wall Mount Vertical Weight: 7lb / 3.2kg

Loading Capacity: 300lb / 136kg

Wall Mount Bike Hanger Feature: Anti-Scratch, Rubber-coated

What You Get

3 x Tracks

6 x Hooks

Bike Racks for Walls Install hardware

• ✅【SPACE SAVING BIKE RACK】Vertical bike hook allows you to keep the bicycles off the floor and free up valuable floor space for your garage. Wall bike hanger vertical thin and sleek design of the wall bike rack doesn't take up a lot of space on the wall, can hold 6 bikes and help you organize your space.
• ✅【HEAVY DUTY & STURDY】Bike rack garage can accommodate 6 bicycles and hold up to 300 lbs, fits most kinds of bikes: mountain bike, road bike, folding bike, adults bike and kids bike etc. Wall bike mount recommended to install on studs or solid walls: wood, brick, concrete wall, etc. (NO drywall).
• ✅【DURABLE MATERIAL】The wall mount bike rack is made of high-quality steel. Powder-coated, finish resists rusting or chipping. Rubber-coated hooks can help avoid rim or tire damages. Vertical bike storage hook's durable smooth finish will last a life time.
• ✅【EASY TO INSTALL & USE】Bicycle garage rack has pre-drilled holes and can be installed in just a few minutes with included instruction and hardware. The bike storage hanger has 3 tracks and 6 removable hooks, which can be separately installed at different heights.
• ✅【PROFESSIONAL AFTER-SALE SERVICE】 We offer 2 years warranty and 24 hours e-mail service support, if you are not satisfied with the bike rack for wall, just send email to us and we will offer a 100% no question asked REFUND or REPLACEMENT. Place the order NOW!

User questions & answers

Question:	Is the hook itself fixed or adjustable
Answer:	It is fixed and easy to put the tire in, it is very convenient.
Question:	Can this wall bike rack hang both adult bikes and kids bikes at the same time
Answer:	Yes, we hang 2 adult bikes and 2 kids bikes, it fits well. It can also be mounted at different height, the kids can hang the bikes too!
Question:	Can this rack be drilled into concrete
Answer:	Yes, concrete is preferred. Concrete anchors are included but will most likely need a tapcon drill in order to insert the anchors. It says it should only be drilled into concrete, brick, or wood. No drywall. I tried with drywall anchors and it popped right out.
Question:	I want to store two bikes on a vertical hanger on the side of my shed. I only have 16 inches between my shed and my fence what are my options?Happ
Answer:	This comes in 3 sections that hold 2 bikes each. So yes you can hand 2 bikes vertically and you would have 2 sections for 4 more bikes left over

• Heavy Duty Construction for Strength and Rigidity 72" H x 48" W x 24" Deep
• Weight capacity up to 4000 lbs distributed evenly over the entire unitWeight capacity up to 4000 lbs distributed evenly over the entire unit
• 5 particle board shelves
• shelves adjust every 1.5" and have a durable black finish
• Holds 800 lbs per shelf or 4000 lbs total

• Reclaim Your Garage - Use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 60 cu. Ft. of storage. Dimensions: 72 in. L x 36 in. W x 22-40 in. H. （Accessory hook and items pictured on the racks are not included.）
• Stability & Safety - With our specially designed longer ceiling brackets that attach to two joists, Fleximounts overhead garage storage racks are more stable and secure compared to others!
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 450 lbs.
• Different - INTEGRATED GRID DESIGN - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step Installation. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 36".

User questions & answers

Question:	How long should it take to install one rack
Answer:	I think it took me about 90 minutes and my skill level is moderate. Finding your ceiling joists and centering it where you want it is most of the work. I pre-drilled the holes for the lag bolts to ease installation and then just bolts together. Easy.
Question:	It says it’s adjustable.... so would this be able to be installed on a slanted ceiling
Answer:	Without seeing the slope of the ceiling, I would assume you would need to adjust one side so it is longer than the other. I mounted my rack to 2x4s on the two sides. It simplified fastening it to the joists in the garage ceiling. It also served to stiffen the unit. It is a beast.
Question:	How many bikes can it hold
Answer:	the picture shows one bike. unless that's just false advertising to sell the product
Question:	Does it bother anyone else that they are showing the item where the door will never open? The Door rail stops and faids out
Answer:	The entire photo is computer generated. That is not photoshop, it's an area install example. There is no chain or drive on the overhead unit, no supports for the clearly small garage door, no electrical for opener, etc. I could go on and on. They just want to depict a usage for the tracks that some people may not think of and yes they do work above the garage door when it is open

Product features

Optimize Your Garage Space

The FLEXIMOUNTS Overhead Storage Rack is an ideal choice to maximize your storage space, and your garage will seem less cluttered and look more spacious. The item comes with all necessary harewares, and have gone through strict tests. Selectable size available to purchase from Fleximounts: 4'x8', 4'x6', 3'x6',3'x8'.

Product description

The Sandusky Lee ERZ772472WL3 is a standing three-shelf storage rack with welded steel frames, welded steel beams, and wire shelves to support a 1,200 lbs/Level Rated Capacity. Rated Capacity, Uniformly Distributed Load – 1,200 lbs/Level. Concentrated Load Capacity - 100 lbs/Sq Ft. This unit has steel braces on both end frames for rigidity. The wire shelves are adjustable in 3" increments to accommodate items of varying height, and the shelves have middle tie bars for support and rigidity. The frames and posts on this storage rack are designed to link together without bolts to facilitate rapid assembly or rapid adjustment of shelf height. This storage rack meets NSF International/ American National Standards Institute (NSF/ANSI) standards for food equipment.

• Standing three-shelf storage rack with welded steel end frames, welded steel beams, and wire shelves to support a 1,200-lb. capacity per shelf
• Black color
• Heavy duty coated wire deck shelving
• With 3 shelf and NSF wire
• Measures 72" height by 77" width by 24" depth

User questions & answers

Question:	Would this unit be able to handle the stress to be installed in a work truck
Answer:	That's not what it was designed for but if it is bolted down properly maybe
Question:	Is the paint finish smooth or rough
Answer:	Paint finish is rough
Question:	I’m not looking to put more of 120 lb so nothing heavy. In this scenario; is it possible to install wheels
Answer:	Wheels cannot be added to this unit.
Question:	could additonal shelves be added in addtion to the ones included
Answer:	The one buyer referred to buying extra shelves... AS A SET!! Not individual. EG: If you buy 3 sets you and put 2 together and use the 3rd for additional parts that Sandusky doesnt sell individually. Option 2 You can link 3 sets together by using 8 Uprights with All supplied shelf supports and you will then have 4 uprights extra. essentially linking 2 complete units with the shelf bracing of the third unit. this is handy when width may be tight. just another option.

Product features

Muscle Rack Heavy-Duty Wire Deck Steel Shelving

The Muscle Rack steel shelving unit provides dependable heavy-duty storage in your garage, basement, workplace, warehouse, or restaurant. It features welded steel end frames, three adjustable height steel wire shelves with center support channels, and a durable black textured finish. Each shelf adjusts in 3" increments and can support up to 1,200 lb per shelf when the weight is even distributed across each shelf.

The unit can easily be assembled following the enclosed instructions and a rubber mallet (optional, sold separately).

Assembled Size

Once assembled, this welded rack measures 77 inches wide by 24 inches deep by 72 inches in height.

Capacity

Each of the 3 wire shelves hold up to 1,200 pounds for a total capacity of 3,600 pounds when weight is evenly distributed and unit is placed on a level surface.

Open Wire Shelves

The open wire shelf design provides high visibility, increased ventilation, and dust-resistance, allowing you to safely organize and easily access any items.

Easy Expansion

Each end frame frame can be used as a common end to connect add-on units for greater storage capacity. Individual beams can be adjusted without disturbing beams in adjoining units.

Rivet-Lock Design

The shelving unit's boltless rivet-lock design allows you to quickly and easily adjust shelf height in 3 inch increments.

Product description

Customer Attention: For upgrade version, We have removed 3m tapes from hardware kits, only keep screw/studs installation for long time usage. Pls make sure your accept before order placed



TOOL STORAGE ORGANIZER:

This industrial wall organizer has both gripper / rolling to hold handles, and four hooks to hanging other cleaning supplies on.

The wall hooks and hangers can be installed indoors ( kitchen Laundry room bathroom

garage shop) and outdoor garden yard, to hold cleaning stuff, or garden tools.



PRODUCT DETAILS:

High Quality Stainless Steel, Suitable for all indoor and outdoor environment!

Triangle-Buckle & Petal-Shaped Gear Design,the anti-slide clips can adjust automatically

along with the different thickness of the handles,fit any tools you want to hang



PACKAGE INCLUDES :

1 x Broom Mop Hooks with 3 Unit Clamps 4 Hooks

4 x Screw

4 x Anchor

4 x Screw Cover



EASY TO INSTALL AND USE:

Screws Drilling installation steps as below:

1）Choose the suitable position for the garage hooks.

2）Drill holes at the positions you marked.

3）Put the screw anchors into the holes.

4）Put the tool on the wall and tighten up the screws.



SATISFACTION GUARANTEED:

We committed life time warranty for the utility rack. Any problem, contact us.

• ✔️INDOORS & OUTDOORS -Perfect for the kitchen,bathroom,garage, shed, mub room, basement or commercial use,thanks to the waterproof design, this garage hangers even works outdoors or on the shed for your garden rack tools!
• ✔️ NO-SLIDE - Cleat rake hanger and hooks with 30 pounds holding capacity! Thanks to the spring-loaded, anti-slip clip, we are sure nothing slides and keep long stick shovel rake more stable.
• ✔️Sturdy Hooks-foldable and extremely sturdy hangers and hooks with stainless steel hook edge design, easy to hung on.
• ✔️Space Saving -The Hooks and hangers keep your closet,laundry room,shed,garden,basement or laundry room clean and neat. Perfect for tools home storage and organization.
• ✔️100% Customer Satisfaction - We provide lifetime warranty for the garden tool organizer. You can buy with no worry.

User questions & answers

Question:	What is the minimum and maximum diameter tool it will hold in the grip? Don’t know? Don’t answer
Answer:	Hi customer, the grip can hold handles dia. within 3/4" to 1-1/2". thank you for the good answer
Question:	What size are the screws that are provided
Answer:	#8 screws about 1 1/2 inches long and metal caps to cover the heads.
Question:	Do you think it will hold tennis rackets
Answer:	No problem
Question:	Can this be mounted on stucco wall
Answer:	No problem, it is wall mounted for all surfaces.

• Intergrated grid design for easier installation, compared to other racks which need separate installation of the frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".
• 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage, compared to other racks with max 33'' ceiling dropdown (max. 88 cu. Ft. of storage). Dimensions: 96 in. L x 48 in. W x 22-40 in. H.
• Cold-rolled 14 gauge steel made rack can hold up to 600 pounds of distributed weight safely and effectively.
• 4 pcs Flat Hooks; 2 pcs Utility Hooks Included.

User questions & answers

Question:	Can a ceiling bracket be mounted in two spots one joist
Answer:	Yes that is how I have mine. I have 8ft rack and 3 brackets are in one joist 4 ft apart
Question:	How can I mount this on joists that are on 20" centers
Answer:	The holes are spaced for joists at almost any distance. My joists were not every 20" and it has been hanging for almost a year with no issues. It is worth the time and effort to put it up.
Question:	Where can i buy the flat hooks
Answer:	Same place you ordered the unit on Amazon.
Question:	What are the interior dimensions? Can I fit a 4x8 sheet of plywood on here
Answer:	I am just using the metal rack by itself but a 4 by 8 sheet should fit. If not, you would just need to trim an edge. Shouldn't be difficult with the right tool.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

• Reclaim Your Garage - Use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 80 cu. Ft. of storage. Dimensions: 96 in. L x 36 in. W x 22-40 in. H. （Accessory hook and items pictured on the racks are not included.）
• Stability ＆ Safety - With our specially designed longer ceiling brackets that attach to two joists, Fleximounts overhead garage storage racks are more stable and secure compared to others!
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design- More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 36".

User questions & answers

Question:	Has anyone mounted it inside a shipping container
Answer:	You can mount it any where there is a sturdy ceiling to support the unit with a load on it.
Question:	Could you hang 4 bikes from the 3x8 rack
Answer:	The rack itself certainly could handle the weight of four bikes. The physical space 3‘ x 8‘ would be a little bit crowded. You would need to carefully organize the way each bike is hung.
Question:	Does this thing wobble back and forth? There is no cross brace to support it
Answer:	A: It doesn’t wobble much. If you’re able to install it against a wall, attach the uprights to that wall, it won’t wobble at all. I couldn’t do that so I attached a piece of scrap 2x4 to the right and left corner uprights and the wall that this was 18inches from. Cheap fix. No wobble. I did this for piece of mind more than anything else. BigRed
Question:	What is the true outside dimensions of the rack? I only have 37" of space to work with and want to know if the outside is
Answer:	The outside dimension of the frame is 36" x 96".

• HEAVY DUTY STEEL: built from steel to hold up to 200 lbs of gear!
• INCLUDES 6 STORAGE ATTACHMENTS: 4 large attachments (11" long, 2" wide) and 2 small attachments (5" long, 2.5" wide)
• CUSTOMIZE TOOL STORAGE: insert attachments to 46" long wall track in custom setup to fit the gear and tools you have in your home, garage, shop, or store
• WHAT GEAR & TOOLS WILL IT HOLD? Rakes, shovels, ladders, hammers, backpacks, skateboards, helmets, and more
• EXCLUSIVE PATENT PENDING DESIGN: built to hold everything in your garage, and built to last!

User questions & answers

Question:	Where is it manufactured
Answer:	Not sure where it was manufactured.
Question:	Why is it so expensive for what it is
Answer:	Unfortunately I do not know, was worth the money
Question:	can i hang pruning loppers on this rack
Answer:	Yes. As my husband says, "you can hang just about anything on it, as long as you have it securely attached to the wall." He loves this tool storage rack.
Question:	Why is it so expensive for what it is
Answer:	Compared to many similar products this is a very heavy duty and it is the strong materials that you are paying for. If you just want to hang a couple of light weight brooms there are cheaper options. If you are like me and are gonna hang weed eaters, multiple shovels, and other heavy yard tools this is worth every penny.

Product features

Fully-Adjustable Wall Track

Customizable wall track system includes (45) mounting points to adjust each row of storage. Independent mounting brackets can be aligned with your wall studs for quick, easy installation and maximum strength, up to 200 lbs!

Heavy-Duty Storage Attachments

Solid metal Tool Storage Attachments hold a variety of tools including garden tools, shovels, rakes, power tools, line trimmers, brooms, mops, extension cords, hoses, bags, ladders, and even wheelbarrows!

Quick-Lock Pins for Easy Adjustments

Each Storage Attachment is locked into place with a gated pin for a rock-solid setup while loading and unloading your tools. This system also makes it quick and easy to adjust the spacing between each row of tool storage.

Space-Efficient Vertical Storage

The Omni System allows you to organize your tools up on the wall and out of the way. Clear up floor space in your garage or shop and keep all your tools neatly organized for your next project!

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative storage solutions for your tools, bikes, skis, snowboards, surfboards, skateboards, longboards, paddleboards, kayaks, wakeboards, canoes, fishing rods, golf gear, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next trip!