14 best cheap garage storage

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

• Reclaim Your Garage - Use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 60 cu. Ft. of storage. Dimensions: 72 in. L x 36 in. W x 22-40 in. H. （Accessory hook and items pictured on the racks are not included.）
• Stability & Safety - With our specially designed longer ceiling brackets that attach to two joists, Fleximounts overhead garage storage racks are more stable and secure compared to others!
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 450 lbs.
• Different - INTEGRATED GRID DESIGN - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step Installation. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 36".

User questions & answers

Question:	How long should it take to install one rack
Answer:	I think it took me about 90 minutes and my skill level is moderate. Finding your ceiling joists and centering it where you want it is most of the work. I pre-drilled the holes for the lag bolts to ease installation and then just bolts together. Easy.
Question:	It says it’s adjustable.... so would this be able to be installed on a slanted ceiling
Answer:	Without seeing the slope of the ceiling, I would assume you would need to adjust one side so it is longer than the other. I mounted my rack to 2x4s on the two sides. It simplified fastening it to the joists in the garage ceiling. It also served to stiffen the unit. It is a beast.
Question:	How many bikes can it hold
Answer:	the picture shows one bike. unless that's just false advertising to sell the product
Question:	Does it bother anyone else that they are showing the item where the door will never open? The Door rail stops and faids out
Answer:	The entire photo is computer generated. That is not photoshop, it's an area install example. There is no chain or drive on the overhead unit, no supports for the clearly small garage door, no electrical for opener, etc. I could go on and on. They just want to depict a usage for the tracks that some people may not think of and yes they do work above the garage door when it is open

Product features

Optimize Your Garage Space

The FLEXIMOUNTS Overhead Storage Rack is an ideal choice to maximize your storage space, and your garage will seem less cluttered and look more spacious. The item comes with all necessary harewares, and have gone through strict tests. Selectable size available to purchase from Fleximounts: 4'x8', 4'x6', 3'x6',3'x8'.

• WALL MOUNTED BROOM HOLDER STRONG AND STURDY - The mop and broom holder organizer is made of tough plastic, which can hold up to 44 lbs(20kg) of weight.Broom and Mop Holder Wall Mounted with Screws Drilling Installation - Fit to Wall Easily and Never Worry The Hanger Will Fall Down on The Next Morning.
• INDOORS OR OUTDOORS -Tidy up your broom, mop, rakes, tools and more! Perfect for the kitchen,bathroom, garage, office, great for commercial use, and thanks to the weatherproof design, this holder even works outdoor or on the shed for your garden tools!
• SAVING SPACE AND STORING -This mounted mop holder is great for saving space.The rack has 5 positions and 6 hooks to help you to hang mop and towel. You can be so easy to say goodbye to musty smell. Make your family clean and tidy.
• EASY INSTALL - Included with broom holder are all the screws and anchors needed to mount securely, along with clear step-by-step instructions that allow even the clumsiest of us can install easily in just minutes!And don’t worry about falling from wall.

User questions & answers

Question:	Will it hold a 1 1/4" vacuum wand
Answer:	I think it should hold 1 1/4 inch wand
Question:	Can this be installed on a door
Answer:	Yes, if you could screw it on to a wooden door. The hardware provided is meant for drywall installation. I wouldn't recommend a door because things may fall off with the use of the door.
Question:	Does it come with wall mounts
Answer:	Yes, dear friend, we prepare 6 screws, it's easy to install.
Question:	What are the full dimensions of the holder (HxWxD
Answer:	Dear, It's 15.7"x2.4"x4.3".

Product features

Fashion life

Do you have a messy pile of cleaning supplies in your laundry room or closet? Are the gardening tools in your garage or shed in disarray? WORRY NO MORE! See the images above for your solution: the HYRIXDIRECT Organizer!

Every family should prepar such Mop Broom Holder Organizer. HYRIXDIRECT Wall Mounted Mop Holder comes with 5 Posistion with 6 Hooks. This Tool Organizer is fit for Garden, Kitchen, Garage, Toolhouse and Home. You can lift your mop, broom, dustpan, and even towel on it. It will bring your house clean and tidy. And the weight capicity is 7-1/2 pounds. Almost every tool can be lifted by the holder organizer.

Multiple ways of use

HYRIXDIRECT mop and broom holder, it not only can organize your family's cleaning tools, but it can also organize your sports equipment in your room, giving your room more space and making your life more enjoyable.

Sturdy base

The base uses a stronger force design, we thicken the thickness of the material, make the product more stable to hang items.and maintain perfect use.

Stronger grip and prevent slipping.

Quickly and easily mount the Mop and Broom Holder using the six supplied screws and screw anchors onto any wall, door or flat surface. This handy accessory keeps items off the floor, reducing clutter in the home while prolonging the lifespan of your cleaning tools at the same time.

Waterproof will not be corroded

Don't worry about water splashing on the mop rack, don't worry about the product being corroded in contact with water for a long time.High-quality products are used longer and make your purchases more cost-effective.

• Reclaim Your Garage - Use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 80 cu. Ft. of storage. Dimensions: 96 in. L x 36 in. W x 22-40 in. H. （Accessory hook and items pictured on the racks are not included.）
• Stability ＆ Safety - With our specially designed longer ceiling brackets that attach to two joists, Fleximounts overhead garage storage racks are more stable and secure compared to others!
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design- More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 36".

User questions & answers

Question:	Has anyone mounted it inside a shipping container
Answer:	You can mount it any where there is a sturdy ceiling to support the unit with a load on it.
Question:	Could you hang 4 bikes from the 3x8 rack
Answer:	The rack itself certainly could handle the weight of four bikes. The physical space 3‘ x 8‘ would be a little bit crowded. You would need to carefully organize the way each bike is hung.
Question:	Does this thing wobble back and forth? There is no cross brace to support it
Answer:	A: It doesn’t wobble much. If you’re able to install it against a wall, attach the uprights to that wall, it won’t wobble at all. I couldn’t do that so I attached a piece of scrap 2x4 to the right and left corner uprights and the wall that this was 18inches from. Cheap fix. No wobble. I did this for piece of mind more than anything else. BigRed
Question:	What is the true outside dimensions of the rack? I only have 37" of space to work with and want to know if the outside is
Answer:	The outside dimension of the frame is 36" x 96".

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

• LARGE CAPACITY:Garage wall mount bike rack garage could accommodate 6 bicycles and hold up to 300 lbs
• CUSTOMIZE BIKE STORAGE: Space attachments to 48" long steel rail to customize spacing to fit your needs
• SAFETY:The sturdy safety hook design could ensure that your bike wall mount stable and will not release accidentally,perfect choice for your garage storage.
• EASY TO INSTALL—The bike storage rack is easy to attach and move around on the rail with 5mm drill. Heavy duty mounting hardware (16*Screw, 16*Expansion tube). Hardware with the kit for wood stud ,drywall,create or brick wall.(Bikes not included)
• SUPER MATERIAL FOR DURABILITY—Powder-coated steel for durability-resists of rusting, chipping and cracking. Rubber-coated sleeves are scratch-resistant. Steel construction epoxy finish.

User questions & answers

Question:	Would the bicycle stain the wall
Answer:	Hello, it doesn't come with CBD oil, one packeg only includes 3 lava bracelets. Thanks.
Question:	Can you mount this on rafters away from a wall
Answer:	No. The bee just stays in there and dies slowly. It takes days unless its really hot outside. The bee in there suffering is what actually attracks more bees to go in the trap. Before you know it , the trap is full.
Question:	Will 29" tires fit on this
Answer:	It it made out of Pine and is not pressure treated
Question:	Could you please tell me how to install this bike storage rack
Answer:	RE46.421 is the patent number. Please look it up. Thank you.

Product features

Suitable for varieties of bikes

Ultrawall garage wall mount bike rack garage could accommodate 6 bicycles. The wall bike rack can fit a variety of bikes such as: road, , beach, kids, and other garage bike rack wall mount along with some of your gear!

Step 1

make out a horizontal line using a spirit level at your desired height on the wall

Step 2

ensure you have the rail the correct way up.Place the bottom of the rail along the maked line

Step 3

Punch the wall

Step 4

Fasten the rail hooks into place.Please note:the fasteners supplied are intended for use in brick walls only,when fastening to timber of plasterboard.

Removable

The space between each hook is adjustable, you could move around the hooks in 48” steel rail to fit your bike storage rack when you need.

Small volume, hold up to 300lbs

bike racks for garage with smaller volume compared with others,but this bike storage garage could holds up to 300lbs in total, and each hook could hold about 50lbs

Super material

The Ultrawall Bike storage rack are made of super industrial steel for durability,which allows bicycles long term storage.and the steel construction with the epoxy finish,this bicycle storage is waterproof.

Product description

Durable Product

Store and organize over 36 tools for easy access and more floor space with this garden tool rack organizer from Rubbermaid. The tool tower stores rakes, brooms, snow shovels, and gas-powered weed eaters for easy access and more floor space in the garage or shed. Front clips allow head-down storage of spades and brooms to simplify access and so that the rack doesn't get top heavy. The clips also enable easy slide-in storage from the side, rather than having to come in from above and sliding the handle into the slot. Four castors mean easy transport of all those tools from one place to another--a feature that makes it easy to relocate all those tools in one easy move, rather than 36 moves. Two of the casters lock to keep the unit in place. The base of the tower has a grid pattern to keep tools from sliding off. --Brian D. Olson

Brand Story

By

• Resin
• Imported
• Tool rack stores and organizes over 40 tools
• Front clips for quick side access
• Easy to assemble with no tools needed
• 4 casters (2 locking) for easy mobility
• Grid pattern on base keeps tools from sliding off

User questions & answers

Question:	What about the clearance needed to get tools out that are stored in the holes? Any issues with ceiling heights when getting tools out
Answer:	Yes, I would recommend having a minimum clearance of your longest tool/rake/etc plus about 10 inches when taking the item out of the rack. I would not recommend it storing large/long tools in an area with a low to normal 7-8ft ceiling (run the risk of hitting the ceiling occasionally). I personally have mine in the basement with a 10ft clearance. It would also work well in some of the pre-fab tool sheds that have a high ceiling. Hope this helps.
Question:	What are the dimensions
Answer:	Deluxe Tool Tower™: (#5E28) Size: 20.5" D x 38" W x 34.4" H From Rubbermaid Home Product website. This info apprears accurate from my experience.
Question:	for outdoor
Answer:	I would NEVER recommend to store your tools outside- I buy good tools and I expect years of use from them- putting them outside is throwing money away and not taking good care. CAN this be put outside? Sure- just like anything you own can- your couch for example. But SHOULD you? This is not its intended purpose. I'm not sure it's UV rated (and I wouldn't expect it to be). Maybe keep on the edge of the garage and roll it out? You could ALWAYS replace the casters no problem if they crap out-cheaper than the holder and your tools!
Question:	Is is sturdy without tools falling over
Answer:	I have at least 50 tools in this caddy including a sledge hammer with many other various tools that would destroy my car. I park my BMW a foot from the stand every day and I have tested it like an earthquake would and it is perfect! I would never park my bmw near it if I were scared of it falling over. Difficult to believe how sturdy it is sometimes.

Product features

Rubbermaid Deluxe Tool Tower

This Rubbermaid Deluxe Tool Tower is ideal for long-handled garden tools. It can store up to 40 tools. It has a molded-in weed trimmer and electric cord holder. Casters make for simple mobility. Easy to assemble with no tools required, it will not rust, dent, rot or peel.

Store Your Long-Handled Tools Securely

The special curved tubing of the Deluxe Tool Tower holds long-handled tools securely. Whether you're storing rakes and brooms head-up or shovels and hoes head-down, tools stay in place while still being easy to put in or take out.

Tool Tower

The basic Tool Tower holds up to 36 tools, with 15 long handle positions and an extension cord holder.

Corner Tool Tower

The Corner Tool Tower maximizes your garage floor space and holds up to 30 tools. It can also be anchored to the wall for additional stability.

Deluxe Tool Tower

The Deluxe Tool Tower holds up to 40 tools, and has casters (two locking) to move around your garage easily.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds with leveling feet, 110 pounds with wheels when not in motion, or 88 pounds with wheels when in motion with evenly distributed weight
• Total max load weight with leveling feet is 1400lbs, with wheels when not in motion is 440lbs, or with wheels when in motion is 353lbs
• Wire shelves adjustable in 1-inch increments
• No tools required
• Durable steel construction with chrome finish
• 3'' industrial wheels for easy moving, adjustable leveling feet also included
• With leveling feet measures 36x14x54.5inches (LxWxH), with wheels measures: 36x14x57.75inches (LxWxH)

User questions & answers

Question:	Can you remove a shelf? Would like to add trash can at the bottom
Answer:	I would place lower shelf all the way to the bottom and set trash can on it then place other shelves where you want. This would keep shelving unit stable. If you need to leave one shelf off keep it and the plastic brackets in case you want to add later.
Question:	Can i buy one additional shelf for the unit i just purchased? it is so sturdy and i would like one more shelf for the very top. thank you
Answer:	Yes, and you can buy a bag of sleeves here for pennies. I have about 10 sets of shelves that I’ve bought here, Walmart, Aldis. The legs are all the same diameter so I’ve been able to interchange shelves to get what I want. The only issue I’ve had is the size of the shelves. Like others have said, check your measurements. If you use the shelf liners do some comparison shopping. Wide difference in price for same thing. I also found a heavy plastic shelf liner roll I can cut to fit. It has tiny parallel ridges that require cleaning with with a nap- like terry- but glasses sitting upside down can breathe so no “bad breath”. Items can be put away still damp as the ridges allow air to move. Love these wire shelves.
Question:	can the 3shelf hold a microwave
Answer:	Only a small microwave. Unit isn't really sturdy enough for larger appliances.
Question:	Are these the industrial size poles that are 1" so I can use shelves I already own
Answer:	The poles we received with the three shelf unit were only 0.75 inches in diameter. The industrial size poles are usually a 1 inch diameter, and are not compatible with the parts we received in this unit.

Product features

Open Shelf Design

Combining a clean, contemporary look with a convenient adjustable design, these shelving units offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, studio, or workshop, each wire shelf can hold up to 73 pounds (evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, removable rolling caster wheels with locking mechanism, and easy no-tool assembly.

• 🏀ORGANIZE ALL YOUR SPORTS GEAR: 🏀Kinghouse sports equipment storage cart with 2 storage bin and 4 wire mesh basket. The large capatity storage bin can holds basketballs, footballs, soccer balls, volleyball, helmets, and even athletic shoes. Organize all your indoor & outdoor sports goods on one basket for truly space saving and providing easy access
• 🏈Special design sports storage system:🏈 Bats hanging hook can hold baseball and softball bats, tennis, badminton and hockey sticks; 3 hooks easily hange items such as bags, gloves, ball caps, jerseys and all your other sportswear; metal wire basket can stores baseball and softball bats, tennis, badminton, and pickle ball rackets, as well as lacrosse and hockey sticks.
• ⚾MANY OCCASIONS: ⚾The Rolling Sports Ball Basket features in 4 heavy-duty smooth rolling wheels, Indoor & Outdoor Design, which is easy to move the organizer anywhere and fits in a specific position.It is ideal for the garage, home, Storage room, playroom, gym, playgroup and schools. DIMENSIONS: Overall product: 36.1" L x 16.54" W x 46.5" H, each basket: 17.7" L x 9.45" W, each storage bin:17.7" L x 15.7" W x 17.7" H
• 🏒SIMPLE AND DURABLE STEEL CONSTRUCTION:🏒 Made of a durable coated steel frame, the sports gear organizer offers long-lasting strength and impressive performance. Simple structure makes it easy to install with the help of instruction.
• 🏆100% SATISFACTION GUARANTEED: 🏆Whatever questions you have, we commit 1-YEAR HASSLE-FREE WARRANTY with replacement or money back on our Kinghouse Sport Equipment Storage for you, friendly service will be there for you.

User questions & answers

Question:	Can i take the wheels off and place the rack in a fixed conner in the garage
Answer:	Yes ,you can.  the package came with 4 multil-direction wheels and 4 adjustable nut base, you can choose to install the nut bases instead of the wheels.
Question:	I have one 7 year old boy and one 10 year old girl. They have many toys and balls. Is this product enough to hold everything
Answer:	I have 3 kids, and it fills our needs perfect! Make our home much more organized! The kids actually put the equipment away! it help our kids develop a good habit.
Question:	Can the sports ball cart be moved around easily in the garden
Answer:	Haven’t tried moving it on grass or in a garden. But it works great in our garage and on concrete.
Question:	Can it be moved
Answer:	Yes, it can. it have 4 multil-direction wheels, you can move it indoor and outdoor.

Product features

Organize all your sports gear together

Make your garage, storage room or playroom much more organized!

Help your child develop a good habit of putting the equipment away!

Equipped with top quality smooth rolling wheels

The wheels are durable, and roll very smoothly. It will be easy to move the organizer indoor and outdoor.

Thoughtful and unique design in the base

The tight mesh base make sure the small size things can be stored. Never worry about having no place for your little toys, table tennis, etc.

Easy Installation

Simple structure makes it easy to install with the help of instruction in minutes!

The screws, tools and instructions are included.

MANY OCCASIONS

Keep your favorite gear together in one spot with the Kinghouse Sporting Goods Organizer.

1. The rolling sports ball organizer with 4 heavy-duty wheels, Indoor & Outdoor Design, which is easy to move the organizer anywhere and fits in a specific position.
2. It is ideal for the garage, home, Storage room, playroom, gym, playgroup and schools.

MANY OCCASIONS

MANY OCCASIONS

MANY OCCASIONS

Product description

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those bulky items that take up so much space on the floor, such as seasonal storage, boxes or totes, outdoor furniture, large tools, tires, or just about anything else you can think of. Made of steel construction, the Ceiling Storage Heavy Lift has a unique pulley system that lets you easily load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. The Ceiling Storage Lift easily lowers 8 feet from the ceiling when you want to retrieve or add items. Raise and lower using a hand crank or attach your power drill. It has everything you need to store large items the safe, easy way without your feet ever leaving the ground.

Assembly required; installs into ceiling joists. Order yours today, and reclaim your garage!

The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage without the need for a ladder. It helps to free up valuable floor space in your garage or storage area and allows you to store heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and more. The heavy-duty 4-by-4-foot platform is built to last and provides 16 square feet of additional storage space in your garage or storage area.

Heavy-Duty Lifting Capacity for Heavier Items

The PHL-1R is both tough and durable, and it's built to handle heavier items up to 250 pounds. The heavy-duty steel support beams and 4-by-4-foot platform are made from high-quality materials that are made to handle tough loads and provide years of consistent performance. The unit is built to lower 8 feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment allows you to raise and lower the platform using your own drill.

The unique pulley system makes it easy to raise and lower heavy items with minimal effort on your part. With a durable winding axle that works in conjunction with the pulleys and strong nylon cables, the PHL-1R handles the brunt of the weight so you don't have to, while raising or lowering the platform quickly and smoothly.

Safety Lock Ensures Safety and Stability

The innovative safety lock ensures that the load stays locked into place when fully raised to the ceiling. Simply use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank's integrated hook to disengage the safety lock and safely lower the platform.

An Additional 16 Square Feet of Storage Space for Your Garage

The PHL-1R's tough 4-by-4-foot platform gives you an additional 16 square feet of valuable storage space in your garage or storage area. This allows you to store your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and creating tidier, more useful quarters.

The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.5 x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and includes all necessary hardware. Additional tools required for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.

What's in the Box

Winding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), three wire grids, two wire beam supports, center spindle square end, center spindle round end, gear drive, Allen wrench, four end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 "J" hooks, 12 washers, 12 nuts.

• Adjustable - Mounts to any ceiling, adjust to angle ceilings with the built in nylon rings
• Durable - High strength steel allows you to lift up to 250 pounds
• Efficient - Raises and lowers by crank and includes all installation accessories
• Reliable - Steel cables allow for 8ft of vertical lift and securely locks into place
• Reclaim Your Garage - 16 sq feet of additional overhead storage space with the 4 ft X 4 ft design, making more room for the things you want to do

User questions & answers

Question:	Does the rack have to be fully retracted to lock? For example, can it be raised half way and lock
Answer:	You can lock it pretty much any height you want. You raise and lower by turning a loop and the lock puts a pin in the loop so it won't turn.
Question:	Do you need to install any lag bolts in the T-bracket section? Directions only show 4 bolts on each of four arms. I want to straddle a metal i-beam
Answer:	Sorry I don't know the answer to that question. I had a handyman install it who has installed it several times. I know he said he used different stronger bolts that were in the original package and said the unit would now hold up to about 300-400 lbs. without worry. You will love it. It's the best solution around.
Question:	my ceiling is about 18 feet in the garage. Can I extend the cables/controls
Answer:	I have 9' ceilings in my garage and the platform lowers to within 18" of the floor. You could add cable to extend the drop to accomodate the added height from the original point. However your highest lift point would be about 7'6" above the floor. I am sure any alterations would void any warranties to the product. On a side note: I have two now and will be ordering at least one more soon. As far as control rod, you will have to extend it to meet your needs. The directions suggest a 1/2 inch drill but I had a local machine shop turn the insert down to fit a 3/8 drill. I might advise you to not use a cordless drill. I personally would consider going a little lighter on the max weight.
Question:	I'm surprised no one mentions that you have to drill ten holes fairly close together in each joist for the lag screws, according to instructions. Ten seems like overkill. Won't this weaken the joist
Answer:	Most ceiling joists are 2x6 and bigger and I have installed two of these lifts on the same joists and have not seen a problem with sagging or splitting of the wood. Considering the lift will hold up to 250 pounds it needs to fastened securely. If you are concerned about your joists being weakened by drilling I'm sure you could come up with a cripple stud solution where a second piece of wood is fastened to the original joists with three bolts and then the lift is screwed into the cripple studs. Still drilling the original joist but only in three places rather the ten.

Product features

Racor Ceiling Storage Lift

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those items that take up so much space on the floor. The Ceiling Storage Heavy Lift has a pulley system that lets you load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. Raise and lower using a hand crank or attach your power drill.

Product description

Get a two pack of the top rated / best selling bicycle hoist on the market! There is no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike - 100 lb. load limit. Please note, you can mount this item as pictured or on a 2 x 4 and then onto the ceiling. RAD Cycle Products is an industry leader and backs it up with a warranty which is the best in the business!

BEWARE OF THE CHEAP IMITATIONS WHICH USE THINNER ROPES THAT FRAY! THESE ARE THE TOP SELLING "RAD CYCLE" LIFTS!

FEATURES:

• Hooks are designed with a rubber coating to protect your bicycle from scratches.
• Robust engineering allows you to lift heavy bikes--100 lb capacity.
• For Ceilings up to 12ft.
• Safe locking mechanism prevents accidental release.
• Raise your bike to the ceiling with ease.
• RAD Cycles exclusive rope is thicker and won't fray.
• Two hoists are included.
• WE OFFER A LIFETIME WARRANTY (100% UNCONDITIONAL GUARANTEE!)

• ►RUBBER COATED HOOKS - Hooks are designed with a protective rubber coating to protect your bike from scratches.
• ►EASY TO INSTALL - Mount to your ceiling joist or rafter and so easy to use. With only the minimum of tools you can have your kayak hanging in your garage in no time.
• ►ROBUST ENGINEERING - Allows you to lift heavy products, up to 100lb. Capacity. This is the bicycle hoist that all the other are trying to copy. We don't cut corners. This is the original RAD Bike hoist you've heard about.
• ►INDOOR USE - For indoor ceilings up to 12 ft. high. Once the bike is out of the way you free up so much floor space you won't know what to do with it all.
• ►SAFETY LOCKS - Safe locking mechanism prevents accidental release. No one wants to come home and find their bike has fallen to the floor.

User questions & answers

Question:	Are the pulley wheels plastic or metal
Answer:	When you don't need this clip, push the plastic mop holder from the down to up in order not to make it broken. Then follow below steps to tear off the adhesive surface, 1. Do not directly pull the adhesive surface to remove. 2. Gently tear off the adhesive surface edge from the wall slowly. 3. Long time not in use, please use a protective film to paste the surface so that it can be used next time. 4. Do not stick to wallpaper wall or painted or plaster or cement surface. So that you can't remove the holder from these surface.
Question:	Has anyone ever used these for Kayak hoists? We have 2 Kayaks and these look like they would work fine
Answer:	Hi friend, if the surface is smooth of your truck, it will work great.
Question:	How easy is it to pull the rope / lift an average bike? Would a typical 12 year old be able to lift his mountain bike? What about a 9 year old boy
Answer:	the smallest diameter of a handle that this can hold is 0.85in, if your handle is smaller than this size, it dosen't matter, because the handle hook or cap or handle cover can prevent the handle from sliding right out from the bottom.
Question:	This says, "two pack." does this mean there is two hoist systems to hang 2 bikes
Answer:	Hi friend, Yes it can hold a garden shovel. Heavy Duty-max bearing 11lbs(5kg)weight per holder. Hope these answers can help you.

Product features

2-Pack RAD Cycle Products Bike Lift Bicycle Hoist 100LB Capacity

Get a two pack of the top rated / best selling bicycle hoist on the market! There is no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike - 100 lb. load limit. Please note, you can mount this item as pictured or on a 2 x 4 and then onto the ceiling. RAD Cycle Products is an industry leader and backs it up with a warranty which is the best in the business!

• Intergrated grid design for easier installation, compared to other racks which need separate installation of the frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".
• 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage, compared to other racks with max 33'' ceiling dropdown (max. 88 cu. Ft. of storage). Dimensions: 96 in. L x 48 in. W x 22-40 in. H.
• Cold-rolled 14 gauge steel made rack can hold up to 600 pounds of distributed weight safely and effectively.
• 4 pcs Flat Hooks; 2 pcs Utility Hooks Included.

User questions & answers

Question:	Can a ceiling bracket be mounted in two spots one joist
Answer:	Yes that is how I have mine. I have 8ft rack and 3 brackets are in one joist 4 ft apart
Question:	How can I mount this on joists that are on 20" centers
Answer:	The holes are spaced for joists at almost any distance. My joists were not every 20" and it has been hanging for almost a year with no issues. It is worth the time and effort to put it up.
Question:	Where can i buy the flat hooks
Answer:	Same place you ordered the unit on Amazon.
Question:	What are the interior dimensions? Can I fit a 4x8 sheet of plywood on here
Answer:	I am just using the metal rack by itself but a 4 by 8 sheet should fit. If not, you would just need to trim an edge. Shouldn't be difficult with the right tool.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

Product description

How it Works:How it Works: As you can see in the picture, our products do not need wire decking. This product does not contain any wooden boards, the customer needs to buy it separately, this product only needs you to install it on the ceiling correctly and we have a complete installation instruction. When you finish the installation you will find it is a perfect storage solution. Heavy Duty:Our product is made of high strength steel 3/32 inch thick. This steel has an irregular shape, ensuring that it can be worked by a heavy duty performance. A strong coating does not corrode easily. Safety and heavy duty products are provided for your garage. The six-leg design guarantees about 1,000 pounds of carrying capacity. In addition, we use high-strength hexagon head pull screws. Our screw size is 5/16 "x3". Benefits: Wire decking is inconvenient when moving small items or boxes, which is why we give it up. Wood boards don't have this problem and they are affordable. Our product has many holes in it and its size can be adjusted from 4’x4’ to 4’x8’. So you can adjust the size to create your own storage space. We have provided the complete instruction and all the accessories. It is simple, efficient and now the most affordable ceiling rack on the market. WARNING: Although my product has a capacity of about 1,000 pounds, but you need to make sure that your garage ceiling has capacity for 1,000 pounds. In addition, the hexagonal head pull screws must be installed on the structural parts of the garage ceiling, and ensure that the structural parts can hold up to 1000 pounds or you risk serious damage to your home, life and personal property.WOOD BOARD IS NOT INCLUDED IN THIS SET. This Product does not come with wood board or wire decks. Customer needs to purchase these materials separately. We recommends 3/8” thick wood board

• This garage ceiling storage rack can hold up to 1,000 pounds of gear while maximizing the garage space at 2.6 cubic meters. Easy to install in dry wall storage rack or directly installed in the ceiling of the garage. Height and length are adjustable. Strong powder coated steel structure.
• The height can be adjusted between 19 and 35 inches. The length can be adjusted between 4feet and 8 feet to meet your various needs for storage space.
• Maximize garage space is 92 cubic feet. Minimum garage space is 18 cubic feet.
• We have two legs in the middle of this rack for heavy duty, so this rack has six legs. All legs are adjustable. The item including all hardware and instruction book. Tools needed: Pencil, Drill Bit, Tape Mesuer, Stud Finder, Ladder, Safety Glasses, Wreach, Rubbr Mallet, Scredrive, Gloves.
• WOOD BOARD IS NOT INCLUDED IN THIS SET. This Product does not come with wood board or wire decks. Customer needs to purchase these materials separately. We recommends 3/8” thick wood board.

User questions & answers

Question:	x4 sheets or just 1. 4x8 sheet
Answer:	This is a piece of 4 feet * 8 feet, can be adjusted by the six legs, each leg is by two feet 8 inches of Angle steel screwed, so the smallest size leg is an inch of eight inches, the size of the biggest can do 3 feet, the width 4 feet is a Angle, length 8 feet is composed of two 4 '6 "Angle, so you can according to your request to assemble, the minimum can do 4 feet * 4 feet 6 inches, the biggest can do 4 feet * 8 feet, because all the screws to fix, so will be very strong
Question:	Can it be used on an vaulted ceilings
Answer:	You could but you will have to adjust the length of your legs so the shelf sits flat.
Question:	Is the unit grey, white, or lavender? I’ve now read/seen all 3 colors mentioned or shown
Answer:	Mine came white powder coated
Question:	What is the drop down max height
Answer:	here are six adjustable legs, each of which is held in place by two one-foot, eight-inch Angle screws, so the minimum leg size is one inch, eight inches, and the maximum size is three feet