12 best clamp meters

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

Product description

Klein Tools CL120 Clamp Meter is an automatically ranging digital clamp-meter that measures AC current and NCVT via the clamp, and AC/DC voltage, resistance and continuity via test-leads. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with time-saving features. Clamp Meter measures current, voltage, resistance and continuity. The clamp jaw integrates a non-contact voltage tester. Includes a carrying case, test leads, and batteries. Durable, multifunction meter. Auto-Range, Hold, Data Hold, and Max value. Auto-power off after 10 minutes to conserve battery life. Includes a carrying case, test leads with CAT III/CAT IV safety caps, Instructions, and 3 x AAA batteries. Low battery indicator and easily accessible battery compartment. Built to withstand a 6.6-Foot (2 m) drop. CAT III 600V, Class 2, Double insulation safety rating. Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day . Since 1857.

• Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads
• Non-contact voltage tester integrated into the clamp jaw
• Backlit LCD for ease of viewing in low light
• Auto ranging measurements
• Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation

Product features

Digital Clamp Meter, Auto-Ranging 400 Amp AC and Non-Contact Voltage Tester Measurements

Klein Tools CL120 Clamp Meter is an automatically ranging digital clamp-meter that measures AC current and NCVT via the clamp, and AC/DC voltage, resistance and continuity via test-leads. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with time-saving features.

Product description

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 AMZN is ideally suited for current measurements up to 400 amp in tight cable compartments.

• Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure dc current
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

User questions & answers

Question:	I need to measure volts, amps and hertz to adjust my generator. Does this model measure hertz
Answer:	hello this model does not measure herzt.
Question:	if I, say, clamp a 120V AC lamp cord, will it measure amps correctly? What about a 220V pool pump motor? Thanks
Answer:	No. You have to use a AC line splitter tool found here on amazon. The line splitter plugs into the wall and then the lamp plugs into the line splitter. Then you can use your clamp meter to measure amps. this separates the neutral and the hot wire so you can meassure the amperage.
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	The 323 will measure DC amps as well as AC? What range will this tester handle in DC amps
Answer:	no just ac clamp around wire

Product features

Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter is a troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.

Continuity detection

Resistance measurement up to 4 kΩ with continuity detection.

True RMS measurements

True RMS AC voltage and current for accurate measurements on non-linear signals.

Ergonomic

Slim, ergonomic design.

Rugged, reliable, and safe

CAT IV 300V/CAT III 600 V safety rating.

Product description

The AstroAI 202D Clamp Meter is designed to be used safely and accurately by anyone. It's design is easy and safe to use with advanced features like Auto-Ranging built right into the meter's design. Run tests on diodes while still being able to measure AC/DC voltage, AC current, resistance, and continuity, all with the same device. This Clamp Meter is designed to be used safely, with it's integrated Clamp for measuring AC Current without having to physically contact the hot part of a wire. Specifications Max. display: 2000 Counts LCD Size: 30*49mm Range Select: Auto Operating Temperature: 32℉~104℉（0℃~40℃）,less than 80% Relative Humidity Storage Temperature: 14℉~122℉(-10℃~50℃),less than 85% Relative Humidity Battery Type: 1.5V x 2 AAA Batteries AC Voltage Test: Yes DC Voltage Test: Yes AC Current Test: Yes Resistance Test: Yes Continuity Test: Yes Diodes Test: Yes Package Contents 1 x AstroAI Digital Clamp Meter 1 x Test Leads (Pair) 2 x AAA batteries 1 x User Manual 1 x Carrying Bag

• 2000 COUNTS CLAMP METER:Check out our VIDEO on the left side and take a quick tour of AstroAI Multimeter! TEST A WIDE RANGE of measurements including AC/DC Voltage, AC Current, Resistance, Continuity; Also Tests Diodes.
• AUTO POWER OFF SAFELY:The amp meter's sampling speed of 2 times per second; If the meter is not in operation for 15 minutes,it will turn off automatically.Auto off conserves battery life and increases the lifespan of your multimeter.
• CONVENIENT FEATURES: Included Data Hold / Max Hold and a Large, Digital LCD Display, and Extra Large Clamp make for easy use while on the job; Low Battery indication keeps unwanted surprises at bay so you never accidentally run out of juice
• SAFETY FEATURE: Transformer Jaws pick up AC Current flowing through the conductor, increasing safety while improving this Multimeter’s capabilities.
• EASILY CARRING AND DURABLE:Commercial settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy- duty functions.

User questions & answers

Question:	Will this read .2 amps on a tiny 22 gauge wire with 5v dc running through the clamp? can it read amps through a wrapped 2 wire (+/-) usb cable
Answer:	This meter does NOT measure DC Current. If you had a different clamp meter that would read DC current, you would have to separate the 2 wires and place the clamp around only one to measure the current. When both +/- wires are in the clamp the fields would cancel and the reading would be zero.
Question:	How many milli amps will the clamp meter read down to? i need one that will read 10mamps
Answer:	In the 2/20 range it will resolve to 1 milli amp (.001).
Question:	Is there an instructional video or other source for how to use this meter? The instructions that came with the meter are not helpful
Answer:	Yes on youtube
Question:	is a better detail manual available? the phamplet that came with the meter is not what I expected
Answer:	I've worked with these kinds of meters my entire career. (Retired). I have never seen a decent instruction manual for one of any brand. But I totally agree that there is a need for more clarity.

Product description

Etekcity's Digital Clamp Mustimeter ensures household electricity maintenance safe.

• Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
• Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
• Additional Features: data hold, max reading, and an easy-to-read large LCD
• Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
• Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation

User questions & answers

Question:	can i get an accurate amp reading on kitchen appliances such as toasters, microwaves with this meter
Answer:	Sounds like what you need is a Kill-A-Watt meter (brand name). You plug the meter in the wall then plug the appliance in the meter. Real simple. Gives amps, watts, volts, etc.
Question:	Can the clamp measure voltage without load
Answer:	The clamp (non-contact) can only measure current (amperage), not voltage. To measure voltage, you'd need to use the probes on a physical connection (terminal or bare wire).
Question:	I am working on a light fixture - if I want to test the actual wires (and not outlet) to see if they're live, what setting would I need to do this on
Answer:	Nobody else said it, but if you use the clamp meter, it must be around a SINGLE wire, it will not work if you clamp around both wires of the cable. You must separate the wires, and clamp only one wire. And the clamp is only gonna measure current, so if the lamp isn't working, this probably won't work. If the plag is plugged-in though, there will be a voltage present, so a non contact voltage tester should be sufficient enough to tell you it's live. Please be careful.
Question:	people said it has an audible beep for continuity and 2 people said it doesn't. What is the true answer
Answer:	It does have an audible beep for continuity. It is an option that must be activated by pushing a button to enable this feature of continuity testing.

Product features

All Purpose Multimeter

The Etekcity Multimeter combines ease of use with innovation, making it the perfect tool for any electrical project.

Easily test AC/DC Voltage, diode, continuity, and resistance. Avoid hazardous situations by using the convenient clamp to safely measure AC currents without having to strip a cord or break a circuit.

It also features hold result and max value buttons that makes it quicker and easier to use.

The autoranging function helps you get precise measurements, every time.

Safe & Simple

Safely measure AC currents with the clamp, so you don’t have to strip any wires.

Voltage Test

Get quick and accurate results when you test both AC and DC voltage.

Multifunctional

Take advantage of multiple functions such as HOLD, MAX, and SELECT.

Autoranging Assistance

The autoranging function allows you to get quick and accurate results.

Diode & Continuity

Ensure that all your electrical connections are correct and safe.

Auto Off

The auto off function saves battery life to maximize your usage.

LCD Display

The easy-to-read LCD display gives you clear measurements.

Unpacking

Comes with a user manual and convenient carrying case.

Product description

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Built to withstand a 6.6-foot (2m) drop. Low battery indicator and easily accessible battery compartment. Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C). Operating altitude to 6562-foot (2000m). Includes carrying pouch, test leads, thermocouple with adapter and batteries. Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857. Voltage - 1000V AC, 1000V DC

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Thermocouple probe measures temperature
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating

User questions & answers

Question:	How small of DC current can this measure? 5mA and lower
Answer:	I'm afraid not. According to the instruction manual, in the lowest DC current range (60.00A) the resolution is 10mA. The accuracy is +/-(2.0% + 8 digits).
Question:	Can these test between 3 phase circuits? Thanks
Answer:	Yes it can, I don't trust it to do it because of the jumps in voltage that happens when it is lightly tapped
Question:	Does it come with a case
Answer:	Yes, Klein does package this meter to be included with a case.
Question:	Does this meter handle run/start capacitors in hvac work
Answer:	Yes this meter and Fluke 324 check capacitance, but the Fluke 324 will NOT check Max amperage nor starting amperage of an air conditioning compressor like this meter does. The Fluke 325 does but is almost $300.

Product features

Digital Clamp Meter AC/DC Auto-Ranging 600 Amp

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians.

• High Accuracy Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT!), AC/DC Voltage, Capacitance, Resistance, Diode and Continuity Tests.
• Large Jaw Design and Mini Size: Jaw opening measures AC current in a conductor up to 26mm without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces
• Multi-Function: Data Hold, Max Reading, Low Battery Indication and NO operation in 15 minutes the ammeter automatically enters sleep mode.
• Two-Color Backlit LCD Display: When the voltage > 80V, the current is> 3A, the LCD backlight screen turns orange to warn you of high voltage. The backlit LCD display also helps you to see the reading clearly in the dark.
• Safety and Service: Safety standard IEC 61010-1 and is rated for CAT III 600V. 3-Year service and lifetime support, 7/24 Customer Service.

User questions & answers

Question:	Can I use this to measure the voltage on my car battery
Answer:	Voltage yes.
Question:	is this meter a true RMS
Answer:	Hi, HT200B is not true rms meter. There is fuse protection while reading continuity if voltage is present.
Question:	Does it have an audible beep for continuity
Answer:	It does have an audible beep for continuity and the LED lights up.
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	They sell a gizmo that you plug your appliance into and then plug into the wall. It separates the wires so you can measure your amps. It's square in form. BTW, the start-up amperage of motors can be 3 times the working amperage. This meter will grab the highest current draw for you if you just push the "Max" button before you turn on the appliance. It will turn the LED display red to alert you that it's done that. Great meter.

Product features

Continuity Test

If the resistance is <30 Ω, an acoustic signal sounds continuously and the LED lights up.

AC/DC Voltage Test

Use the test leads to get the reading quickly and accurately. (Max 600V)

Resistance Test

Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ

Accuracy: ±(1.0%+5).

Two-color backlit

When the voltage > 80V, the current > 3A, the LCD backlit screen turns orange.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without the further operation, it beeps again and switches off automatically.

• 【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement
• 【With NCV&LIVE Line Test Function】Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire
• 【Continuity Test & Over Load Protection】Designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. Shows "OL" on the LCD if over range
• 【Easy to Use and Read With Large LCD Screen】Small and portable to carry and use. High resolution and low battery indication. The flashlight access convenient AC current measurement in the dark. Data hold, auto range and auto power off
• 【You Will Get】Meterk Digital Clamp Meter, 1 Pair of Test Probe, 1 Temperature Probe, 3 AAA Batteries(Inside the Clamp meter), User Manual (English + French + German + Italy + Spanish), 1 Storage Bag

User questions & answers

Question:	Can it measures in rush
Answer:	EVIDENTLY some "people" answer, or try to answer questions that they have no fricking idea about what they are talking about.... YES, it DOES measure "inrush", or more correctly, SURGE current. I have found that due to its sensitivity you need to select the high- 600 amp range since it will sense the current spikes that are VERY, VERY short. (IF your are measuring a smaller current, ~2-4 amps, then the 60 amp range will work). ALL you have to do is press the "min/max" button.... IF the 60 amp range does not work at first, then the 600 amp range should be selected.. THIS IS THE REAL ANSWER...... (And NO, you do not have to keep your "eye on it") Scheesh........
Question:	just received order and unit does not show that it is true rms. should it be posted on the item
Answer:	Yes it should be labeled on the outside of the item where it is visible. If the description said it was true rms when placing your order, it should be. But if it's not labeled as true rms after you received order then only 2 things can be wrong. 1st they sent you the wrong item, or 2nd it was a factory erar that accured when the item was manufacturerd . Either or, id send it back and ask for the wright one
Question:	can i use the clamp on devise to measure the negetive battery cable to find if something is drawing my battery down
Answer:	No, this clamp meter is foe AC amps only. UNI-T 210E is one of many clamp metesr that can do DC amps and can be used for what you ask about.
Question:	How long is the warranty
Answer:	One year warranty.

Product features

AC/DC voltage

Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire.

Battery Test

Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement

Resistance Test

It’s design is easy and safe to use with advanced features like True RMS and Auto-Ranging built right into the meter’s design. It can run tests on resistance.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

Continuity Test

• Connect the test leads to two points on the circuit being tested. （audible assurance).If the circuit does not work, “OL” will be displayed on the screen.
• Auto power off, the clamp multimeters will turn off automatically after 15 minutes without any actions. To turn it on.

Backlit LCD and Low Battery Indication

• Large digital display with backlit LCD for visibility in dimly light areas;
• Low voltage indication, you can quickly know to replace the battery and continue working.
• The flashlight access convenient AC current measurement in the dark

Automotive Maintenance

• Properly test fuses, wiring, and even your battery to ensure everything is in order for your next road trip.
• Wide range of applications, ideal for home and professional use, automotive, home and industrial electrical troubleshooting

• 🎁 Gift for Men
• 🗜️【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC Voltage, AC/DC Current, Frequency, Continuity, Duty Cycle, Diode, Capacitance and Resistance Measurement.
• 🗜️【With NCV & Live Line Test Function】Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage (90V-1000V) or Live Wire.
• 🗜️【Continuity Test & Overload Protection】Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage (90V-1000V) or Live Wire. Shows "OL" on the LCD If Overload.
• 🗜️【Easy To Use And Read】Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display. Widely used in your life.
• 🗜️【You Will Get】Meterk MK06 Digital Clamp Meter 4000 counts, 2* Test Leads, 3* AAA Batteries, User Manual(English + French + German + Italian + Spanish) , 1* Storage Bag.

Product features

• True-RMS Clamp Meter: This multimeter can accurately measure AC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity and Temperature. DO NOT MEASURE DC CURRENT!
• Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of inrush current is about 100ms.
• NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.
• Advanced Functions: The Clamp Meter has VFD, LOZ, MAX, MIN, REL, RAN, Date Hold, Low battery display and automatic shutdown. Multi-function clamp meter can satisfy all your needs
• Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service.

User questions & answers

Question:	does it measure inrush current
Answer:	YES,it is very helpful to me.
Question:	Does this unit have a flash light and backlight
Answer:	YES,it can help you work well in the dark place
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	To measure the current you need to clamp the meter around one of the wires, and not the whole power cord. If you just clamp around the appliance cord you will get a zero reading.

Product features

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

Inrush Function

Knowing the value of inrush current can help you locate a startup problem.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Large Size

Size: 10×3.5×2 inches.

Large Size easy to operation.

How to measure inrush current

• ▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
• ▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
• ▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
• ▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
• ▲ What You Get: 1x Tacklife CM06 Digital Clamp Meter, 2x Test Leads, 2x AAA Batteries, 1x User Manual, 24 month service; Be assured of purchase Tacklife CM06 digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem

User questions & answers

Question:	What is the DC current measurment capaility? Are there no specs for this meter other than it can read up to 600v
Answer:	It uses a Hall Effect sensor so the AC rating is the same as the DC rating. This website has the specs that confirms that: https://www.wantitall.co.za/tools/multimeter-tacklife-cm01a-clamp-meter-4000-counts-auto-ranging-digital-tester-with-ncv-ac-dc-voltage__b01n014use I tried it on my motorcycle, and it read the starting current of ~75A fine. The paper manual said the same. I can't find an electronic copy. The Amazon UK site has more info. It shows the range as 40A/400A https://www.amazon.co.uk/dp/B01N014CTB HTH.
Question:	Is this meter fast enough to indicate max current draw on the battery cable of a starting vehicle
Answer:	I have used a similar meter to watch the combined starting and glow plug current on a diesel Sprinter. No problem. Since this uses a Hall Effect sensor, instead of routing the 400 amps *through* the meter, overrange current pulses should not be a problem.
Question:	What is the resolution of the current reading
Answer:	While this meter reads to 1 milliamp that doesn’t necessarily mean that it is accurate to 1 milliamp. It drifts quite a bit in the milliamp range. You are given the option to zero it out before taking a reading, but it does continue to drift. It is a marvel that a Hall effect meter that can read DC is offered at this price, but don’t expect +/- 1 milliamp accuracy. I am a physicist by training and at one time worked at Textronix, a premier provider of test and measurement equipment.
Question:	Can DC current be measured by the clamp
Answer:	It not only measures DC current accurately via the clamp but it also indicates the direction of the current. Due to the disagreeing answers on this question, I went ahead and bought it. It works really well for DC current and is going to be be an excellent tool trying to troubleshoot a vehicle battery drain. Just remember that not all clamps measure DC current. Most cheaper meters do not but this one works great for it.

Product features

Tacklife CM06 Clamp Meter 6000 Counts Auto-Ranging

The tool CM06 of TACKLIFE is a clamp meter with an automatic measuring range of 6000. It is easy to use and innovative. The clamp meter with convenient use can safely measure AC/DC current, AC/DC voltage, resistor, diode, on-off and capacitor without stripping or disconnecting the circuit to avoid dangerous situations.

The clamp meter also has "SEL" function selection keys, "Hz/%" frequency/duty ratio selection keys, "ZERO" automatic zero-setting keys, "HOLD" data retention keys, and backlight/working light keys.

Specification:

• Environmental conditions: 600V CAT. III, pollution degree: II, altitude <2000m
• Working environment humidity: 0~40°C (<80% RH, not considered when <10°C).
• Storage environment temperature and humidity: -10 ~ 60 ° C (<70% RH, remove the battery).
• Temperature coefficient: 0.1X accuracy / °C (<18 ° C or > 28 ° C).
• Maximum allowable voltage: 600V DC or 600V AC rms.
• Sampling rate: about 3 times / sec.
• Display: 33/4-digit LCD display.
• Overrange indication: The LCD will show “OL”.
• Input polarity indication: “-” is automatically displayed.
• Dimensions: 218mm X 78mm X 32mm
• Weight: no more than 280g (with battery)
• Clamp head opening maximum size: 26mm

Resistance, Diode, On-off, Capacitance measure

When you measure resistance, diodes, switches, and capacitance, be sure to turn off the power to the circuit under test and discharge all capacitors.

AC or DC Voltage&Current Measure

Rotate the measuring function selection turntable to the voltage test gear, and select the AC or DC voltage measurement function by pressing the "SEL" key. The black pen line and the red pen line are connected to the COM input jack and the INPUT input jack respectively. The voltage of the circuit to be tested is measured at the other two ends of the pen. The operation is simple.

NCV Voltage Induction and Test Wire

When the voltage induction area of NCV is close to 90-1000V AC voltage or fire line, the instrument will emit sound of sound and light alarm signal "droplet". Make the measurement safer.

Ideal Gifts For Your family & Friends to do some DIY at Home

• Ideal Gifts For Your family & Friends to do some DIY at Home❤You can return/replace this clamp meter purchased here within 24 months without giving any reason❤
• ▲SAFE AND QUICK MEASUREMENT - Auto Ranging accurate measures AC current to 600 A, AC and DC voltage to 600V, resistance to 6000Ω, temperature tester,quick response， perfect troubleshooting tool to help you solve automotive or household electrical problems quickly and safely
• ▲SPECIAL LOW IMPEDANCE TEST FOR HIGHER ACCURACY - Measure the blocked voltage when connected to the wire for more accurate measurement. Low Pass Filter, measuring low frequency signals with the tip clamp. Work is more convenient, improve your life quality
• ▲BRIGHT BACKLIGHT DISPLAY - With the backlight display to read and record easily under dark areas. Automatically enters sleep mode after 10 minutes of inactivity for energy conservation. Devoting to optimize user experience, perfect for both professional or new users
• ▲DATA HOLD AND CARRYING CASE - Data retention and backlight buttons on the side of the amp meter make it easy to take readings while you operate. The meter is equipped with a carrying case that you carry and save
• ▲PACKAGE CONTENT: 1 x Tacklife CM02A Advanced Clamp Meter, 1 x K-Type Thermocouple, 1 x Test Leads (Pair), 2 x 1.5V AAA Batteries, 1 x User Manual, 1 x Cloth Pouch, 1 x 24-Month After-sale service card

Product features

Tacklife CM02A 600 Amp TRMS 6000 Counts Auto-Ranging Multimeter

About Tacklife

At Tacklife, we aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle.

We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products.

The Tacklife CM02A multimeter combines ease of use with innovation, the perfect troubleshooting tool to help you solve any car or home electrical problem quickly and safely.

· The main function of the clamp meter is to measure current / ampere. To do this with any clamp meter, the hot and neutral wires must be separated or they will cancel each other out and give a zero amp reading.

· The battery is not rechargeable. When replacing the battery, you need to first unscrew the battery back cover with a screwdriver.

· When measuring voltage, press SEL/NCV to switch to DC or AC voltage.

· The function of measuring temperature can only measure liquid, -20~300°C（-4°~572°F）±1%+2

· The NCV function can be used when the function dial is rotated to any function key. To use the NCV function, keep pressing the SEL/NCV button.

· When the meter automatically shuts down, press SEL/NCV to wake up the meter.

· When there is no measurement, this is a normal phenomenon if the meter has a numerical value. Because there is an electric field in the environment around us, but the voltage of this electric field will be very small, the value displayed by the meter will not affect the measurement results.

· The value is unstable when measuring: it may be because the tip of the test pen does not completely touch the object being measured.

Multifunctional

When you measure resistance, diodes, switches, and capacitance, be sure to turn off the power to the circuit under test and discharge all capacitors.

AC current & AC/DC Voltage Measure

Measure AC current (maximum 600A), AC/DC voltage (maximum 600V), low impedance voltage, resistance (maximum 60 megohms), on-off, capacitance and temperature.

Automotive Circuit Testing

The essential tool in the car to escort you every travel.Wide application range and powerful functions.

Wide Range of Applications