11 best capacitance multimeters

• High Accuracy Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT!), AC/DC Voltage, Capacitance, Resistance, Diode and Continuity Tests.
• Large Jaw Design and Mini Size: Jaw opening measures AC current in a conductor up to 26mm without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces
• Multi-Function: Data Hold, Max Reading, Low Battery Indication and NO operation in 15 minutes the ammeter automatically enters sleep mode.
• Two-Color Backlit LCD Display: When the voltage > 80V, the current is> 3A, the LCD backlight screen turns orange to warn you of high voltage. The backlit LCD display also helps you to see the reading clearly in the dark.
• Safety and Service: Safety standard IEC 61010-1 and is rated for CAT III 600V. 3-Year service and lifetime support, 7/24 Customer Service.

User questions & answers

Question:	Can I use this to measure the voltage on my car battery
Answer:	Voltage yes.
Question:	is this meter a true RMS
Answer:	Hi, HT200B is not true rms meter. There is fuse protection while reading continuity if voltage is present.
Question:	Does it have an audible beep for continuity
Answer:	It does have an audible beep for continuity and the LED lights up.
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	They sell a gizmo that you plug your appliance into and then plug into the wall. It separates the wires so you can measure your amps. It's square in form. BTW, the start-up amperage of motors can be 3 times the working amperage. This meter will grab the highest current draw for you if you just push the "Max" button before you turn on the appliance. It will turn the LED display red to alert you that it's done that. Great meter.

Product features

Continuity Test

If the resistance is <30 Ω, an acoustic signal sounds continuously and the LED lights up.

AC/DC Voltage Test

Use the test leads to get the reading quickly and accurately. (Max 600V)

Resistance Test

Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ

Accuracy: ±(1.0%+5).

Two-color backlit

When the voltage > 80V, the current > 3A, the LCD backlit screen turns orange.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without the further operation, it beeps again and switches off automatically.

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

Product description

BONUS: Add B07WQ21YMY to cart and enter code DWU9IJAQ, recieve 10pcs test leads with alligator clips for only 5.38.

Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

• Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
• Display: True RMS, 6000 counts, 3 5/6 digits
• Overload Display: Display OL
• DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
• DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
• AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
• Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
• Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
• Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple

• WIDE APPLICATIONS - KAIWEETS digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC voltage, AC/DC current(DC is the default), resistance, continuity, frequency, capacitance and diode, liquid temperature, wire on-off, Battery checking. This advanced tester can diagnose automotive, industrial and household electrical issue.
• EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging.
• SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage
• AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Will we be able to add a bluetooth upgrade to our meters since it indicates an updated meter will have it and it also has the symbol
Answer:	Yes
Question:	How long is the warranty
Answer:	No not good driving gloves
Question:	Just wondering if you ship this item to Australia
Answer:	I used these gloves and my hands did not get wet.
Question:	where can i buy replacement fuses? I love this meter but blew the fuse
Answer:	You can make a fist and I've used them for general cold weather yard work, but the gloves take away fine motor skills. Gripping a hammer would likely not be a problem. Holding a nail might be slightly more difficult.

Product features

Kaiweets HT118A Digital Multimeter

An advanced multimeter designed to be used safely and accurately by electricians at work places or homeowner and DIYer who need more capabilities than the standard measuring tool.

* Light up the terminals: LED indication light as input terminal guidance

* CAT III 1000V, CAT 600V safety rating

* Double insulation, robust outer case

* Includes test leads, K-Type thermocouple, batteries and user manual

Sensitive Continuity Test

Loud buzzing sound

Resistance < 30Ω, green light

Resistance between 30Ω to 60Ω, red light

2.7 inch Display

Display turns to orange when voltage is over 80V.

Large, clear digits

bar graph

Low battery indicator

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Maximum Safety

Dual fuse

Dual PTC thermistor

Intelligient Anti-Burn

Overload protection on all ranges.

Product description

Klein Tools MM400 is an auto-ranging multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations. Includes test leads, thermocouple with adapter and batteries. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Multimeter measures up to 600V AC/DC voltage, 10A AC/DC current and 40 M resistance
• Electrical tester measures temperature, capacitance, frequency, duty-cycle, and test diodes and continuity
• CAT III 600V safety rating
• Built to withstand a 3.3-foot (1 m) drop and withstand daily wear and tear on the job site
• Low battery indicator and easily accessible battery compartment

User questions & answers

Question:	Does it measure LoZ voltage
Answer:	MM400 does not have a LoZ function, and operating instructions are mute with respect to measuring LoZ. Klein Tools has other multimeter models that have a LoZ function.
Question:	Where does the battery go? Do I have to unscrew the back plate
Answer:	Yes. Take off the plate that acts as a flip out stand.
Question:	Is this meter made in usa and also can it be used for household and automobile purposes
Answer:	Made in China. Klein says of the MM400: "For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations." I've used it for residential and automobile purposes.
Question:	Does it come with a case
Answer:	Mine did not come with a case, but you can order one. Look at the bottom of the listing at "frequently bought together" or something like that verbiage to show what case to order. I prefer a hard case, so I did not order the soft zipper one.

Product features

Digital Multimeter, Auto-Ranging, 600V

Klein Tools MM400 is an auto-ranging multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians.

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

• Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.
• High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V
• Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.
• Multi-function: Auto power off; Data Hold function; Low Power Indication; ZERO ADJ for Capacitance.
• New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip; The black pen is connected to the negative pole and the red test lead is connected to the positive pole

User questions & answers

Question:	Seller,what are minimum measured values of capacitance-10pf?,inductance-100uh?,resistance-100ohm? put your answer here and in description near price
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. The minimum values for your measurement: the capacitance, 1.0pf; inductance, 1.0uh; resistance, 1.0ohm. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	Can you check the inductance/capacitance of a component using test leads, not using the "flat" slots on the front of the meter, designated "LCR
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	I need to measure down to 2uh, will this meter do that
Answer:	Lowest range on the BM4070 is 200 microhenries, with a resolution of 0.1 uH. However, accuracy degrades substantially at small inductance values. For example, my instrument reads 0.9 uH with zero test inductance (test lead length is 2 x 8 inches). With a 26 inch pair of test leads, this error increases to 2.3 uH. Thus, it's important to determine and subtract out the stray inductance of your test setup before trying to measure anything as small as 2 uH. Also, I have no precisely known inductances at values this small, so cannot say what the instrument calibration accuracy is in this range. If accuracy/precision are important, I'm afraid you're going to have to obtain a (much more expensive) lab-grade instrument, such as an inductance bridge, capable of measuring down to this level.
Question:	For l/c measurement, what frequency do this use? 100hz? 1khz? 10khz? or
Answer:	Thanks for your asking. For our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a special digital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]

Product features

Tips for not accurate measurement:

To measure small capacitance, different measurement principles and different measurement frequencies will lead to different measurement results.

The resistance component affects the accuracy, and the measurement results need to be subtracted from the data displayed before the measurement.

When measuring small inductors and capacitors, if the component feet are suitable, it is recommended not to use the test leads. Please just insert component feet directly into two rectangular jacks of LCR Meter to measure.

1 LCR meter, 1 pair of Crocodile Clip, 1 pair of Alligator, 1 pair of Test Probe, 1 Screwdriver, 1 9V Battery, 1 User Manual,1 Portable Bag

Inductance (L): 200uH-20H, up to accuracy: ± 2.5% (μH=10-6H; mH=10-3H);

Resistance (R): 200Ω-20MΩ, accuracy up to: ±0.8%;

Capacitance (C): 200pF-2000uF, accuracy up to: ± 2.5% (PF=10-12F;nF=10-9F;μF=10-6F;mF=10-3F);

Note: If you are measuring a patch component (SMD), the shorter the measurement line, the more accurate the measurement.

Inductance (L): 200uH - 20H

Range:200uH;Accuracy±(3%+5);Resolution:0.1uH

Range:2mH;Accuracy±(2%+5);Resolution:1uH

Range:20mH;Accuracy±(2%+5);Resolution:10uH

Range:200mH;Accuracy±(2%+5);Resolution:100uH

Range:2H;Accuracy:±(2%+5);Resolution:1mH

Range:20H;Accuracy±(5%+5);Resolution:10mH

Resistance (R): 200Ω - 200MΩ

Range:200Ω;Accuracy±(0.8%+2);Resolution:0.1Ω

Range:2KΩ;Accuracy±(0.8%+2);Resolution:1Ω

Range:20KΩ;Accuracy±(0.8%+2);Resolution:10Ω

Range:200KΩ;Accuracy±(0.8%+2);Resolution:100Ω

Range:200MΩ;Accuracy±(1.5%+5);Resolution:10KΩ

Capacitance (C): 200pF - 2uF

Range:200pF;Accuracy±(2.5%+5);Resolution:0.1pF

Range:2nF;Accuracy±(2.5%+5);Resolution:1pF

Range:20nF;Accuracy±(2.5%+5);Resolution:10pF

Range:200nF;Accuracy±(2.5%+5);Resolution:100pF

Range:2uF;Accuracy±(2.5%+5);Resolution:1nF

Range:20uF:Accuracy±(2.5%+5);Resolution:10nF

Range:200uF;Accuracy±(2.5%+5);Resolution:100nF

Range:2000uF;Accuracy±(5%+5);Resolution;1uF

Product description

The Etekcity MSR-A600 Digital Mustimeter is the perfect startup multimeter for hobbyists, entry-level electricians.

• AUTO-RANGING: Accurately measure AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, Diode, and so on
• SAFETY ASSURED: Overload protection on all ranges. Built-in double explosion-proof ceramic fuse tubes. Reverse Polarity protection.
• HIGH PRECISION: High sampling speed (3 times/sec), enables you to confidently diagnose automotive, industrial, and household electrical issues
• CONVENIENT FEATURES: Low battery indication, Data Hold, Auto shut-off, Built-in kickstand
• BACKLIGHT DISPLAY: Large LCD display provides clear readings, and soft backlight offers visibility in dimly light areas
• BUY WITH CONFIDENCE: 2-Year Warranty (1-year buyer assurance and a free option to extend it by 1 more year). Feel free to contact us and we are ALWAYS READY TO HELP if you have any questions

User questions & answers

Question:	Will this test the capacity of a aa/aaa battery
Answer:	yes, insert the black lead in to com. and red test lead to VQmAuA, turn the dial to Q . put leads on capacitor outlets and hold til until readings stabilize, The lcd will read OC if there is an open circuit. If less than .050 check for loose connections or damaged wire.
Question:	Can i use this to test whether my ac adapter is working? thanks
Answer:	Yes, there is an audible beep when you have the meter set to continuity and the probes are placed on a conductor.
Question:	Can this be used to test capacitors in heat pumps
Answer:	Yes, this will go up to 1000V.
Question:	Does the continuity function have an audible beep
Answer:	india

Product features

Specification:

1. DC Voltage: 200mV/2000/20V/200V/600V± (0.7%+3)

2. AC Voltage: 200mV/2000mV/20V/200V/600V± (1.2%+3)

3. DC Current: 200μA/2mA/20mA/200mA/2A/10A± (1.2%+5)

4. AC Current: 200μA/2mA/20mA/200mA/10A± (1.5%+5)

5. Resistance: 200Ω/2KΩ/20KΩ/200KΩ/20M/200MΩ± (5%+5)

6. Capacitance: 2nF/20nF/200nF/2μF/20μF/200μF/2000μF

7. Diode Check: The resolution is 0.001V

8. Continuity Check: When the circuit supports electricity, the buzzer will sound off.

9. Safe Class: CAT II 600V

Large LCD Screen

Large digital display with big digits, full-scale gear symbol prompts, and unit display makes it easier to use than ever.

Data Hold

Data hold function keeps measurements on the large display while you record them.

Drop Protection Included

The rubber sleeve ensures that the multimeter is always protected from wear and tear during projects, and it even has a test lead holder for easy storage.

Improved Buzzer

An electromagnetic buzzer creates a crisp and loud alert when taking measurements.

• 【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement
• 【With NCV&LIVE Line Test Function】Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire
• 【Continuity Test & Over Load Protection】Designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. Shows "OL" on the LCD if over range
• 【Easy to Use and Read With Large LCD Screen】Small and portable to carry and use. High resolution and low battery indication. The flashlight access convenient AC current measurement in the dark. Data hold, auto range and auto power off
• 【You Will Get】Meterk Digital Clamp Meter, 1 Pair of Test Probe, 1 Temperature Probe, 3 AAA Batteries(Inside the Clamp meter), User Manual (English + French + German + Italy + Spanish), 1 Storage Bag

User questions & answers

Question:	Can it measures in rush
Answer:	EVIDENTLY some "people" answer, or try to answer questions that they have no fricking idea about what they are talking about.... YES, it DOES measure "inrush", or more correctly, SURGE current. I have found that due to its sensitivity you need to select the high- 600 amp range since it will sense the current spikes that are VERY, VERY short. (IF your are measuring a smaller current, ~2-4 amps, then the 60 amp range will work). ALL you have to do is press the "min/max" button.... IF the 60 amp range does not work at first, then the 600 amp range should be selected.. THIS IS THE REAL ANSWER...... (And NO, you do not have to keep your "eye on it") Scheesh........
Question:	just received order and unit does not show that it is true rms. should it be posted on the item
Answer:	Yes it should be labeled on the outside of the item where it is visible. If the description said it was true rms when placing your order, it should be. But if it's not labeled as true rms after you received order then only 2 things can be wrong. 1st they sent you the wrong item, or 2nd it was a factory erar that accured when the item was manufacturerd . Either or, id send it back and ask for the wright one
Question:	can i use the clamp on devise to measure the negetive battery cable to find if something is drawing my battery down
Answer:	No, this clamp meter is foe AC amps only. UNI-T 210E is one of many clamp metesr that can do DC amps and can be used for what you ask about.
Question:	How long is the warranty
Answer:	One year warranty.

Product features

AC/DC voltage

Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire.

Battery Test

Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement

Resistance Test

It’s design is easy and safe to use with advanced features like True RMS and Auto-Ranging built right into the meter’s design. It can run tests on resistance.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

Continuity Test

• Connect the test leads to two points on the circuit being tested. （audible assurance).If the circuit does not work, “OL” will be displayed on the screen.
• Auto power off, the clamp multimeters will turn off automatically after 15 minutes without any actions. To turn it on.

Backlit LCD and Low Battery Indication

• Large digital display with backlit LCD for visibility in dimly light areas;
• Low voltage indication, you can quickly know to replace the battery and continue working.
• The flashlight access convenient AC current measurement in the dark

Automotive Maintenance

• Properly test fuses, wiring, and even your battery to ensure everything is in order for your next road trip.
• Wide range of applications, ideal for home and professional use, automotive, home and industrial electrical troubleshooting

• 【2000 Counts 8233D PRO Pocket Digital Multimeter】 Wide Application: It Can Accurately Measure AC/DC Current Voltage, Resistance, Capacitance (4-2000uF), Frequency (1kHz-200kHz), Continuity
• 【Included 9 Volt Battery】The Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included Pair Test leads and Pair Banana Plug to Alligator Clip Cable
• 【CE Rated Digital Mulimeter with Over Load Protection】 Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
• 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
• 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free

Product features

Overview:

The 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. It's a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with rubber case, can against the shock of a drop.

Package List:

1x NT8233D pro multimeter

1x Banana Plug to Alligator Clip Cable

1x Test Probe Lead

1 x 9V 6F22 Battery

1x User Manual

2000 Counts Pocket Digital Multimeter

Measurement: AC DC Voltage, Resistance, Continuity, Diode, Capacitance, Frequency, AC DC Current.

Over load protection, Safety Class: IEC 61010-1, CAT II 600V

Nice Protective Orange Rubber Case, against the shock of a drop.

Tips:

1. The automatic range digital multimeter has a large internal resistance (high input impedance), and there is induced voltage interference when open circuit. The AC DC gear will have a digital jump when it is turned on, but it will not affect the measurement.

2. When turning on the meter and move the dial to ohms, it reads of OL (default), it's normal. In this case, it means that Infinity of resistance.

Bulit-in Stand

The back stand can place the meter at 45 degree angle position and make you hands-free.

• WIDE RANGE of tests for AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, Frequency and Temperature; Tests Diodes.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage.
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Kickstand, and Low Battery Indicator make taking and recording measurements easier than ever before.
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities.
• SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Explosion-proof ceramic fuses provide maximum safety; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.

User questions & answers

Question:	Will this meter measure frequencies on a sensor with specs between .114hz and .152hz
Answer:	Hello Customer, Thanks for your concern, yes, this meter can read frequencies between .114hz and .152hz. AstroAI Customer Support
Question:	Do this multimeter comes with a case, if not do anyone where can i buy one
Answer:	no it doesn't come with a case
Question:	are there test leads with aligator clips available for this meter? if so where
Answer:	Test leads with alagator clips do not come with the meter, but a set with alagator clips are available on Amazon that should work. I hope this helps.
Question:	Is it possible that the leads supplied with the meter don't plug into the front of the unit? Mine seem too large in diameter to push into the ports
Answer:	After removing the caps they are flimsy and you might have to wiggle to get the center connector aligned before pushing all the way in.

Product features

AstroAI 4000 Counts True RMS Digital Multimeter

The AstroAI multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything.

Trouble Shooting with Maximum Safety

AstroAI multimeters are professionally designed to troubleshoot electrical problems or just for electronics training.

Intelligent Anti-burn and Double Protection

Built-in F500mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; This multimeter is designed with safety in mind. Integrated fuses protect users of all skill levels.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Backlit LCD and Data Hold

Large digital display with white backlit LCD for visibility in dimly lit areas; It is often easier to use the data hold to easily read and record data.

Low Battery Indication

Never run out of battery with a notification letting you know exactly when to replace the batteries.

Automatically Shut Off

Conserves power by automatically shutting off after 15 minutes of inactivity.

Full Support and Always Protected

Open up the support stand to prop up the multimeter and make reading measurements easier. The rubber sleeve ensures that the multimeter is always protected from wear and tear while on the job.

• VERSATILE SETTINGS: The AstroAI Digital Multimeter accurately measures AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, and Tests Diodes and Batteries (1.5, 9, 12V Battery Settings)
• NON-CONTACT SAFETY: This DMM is designed with safety in mind. The NCV Function minimizes exposure to live wires; the probe works for outlets, sockets, terminals, and more
• PRACTICAL FEATURES: When using a Multimeter, the small details like Data Hold, a Large Backlight LCD Screen, Kickstand, and Low Battery Indicator help get the job done better and faster
• TROUBLESHOOTING MADE EASY: Whether the job is a quick DIY continuity check or a complex problem, the durable design and consistent readings pair well for a both long days in the field or tinkering in the garage
• SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Anti-Burn with double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.

User questions & answers

Question:	do i have to unhook my cars battery to check it's voltage
Answer:	You should be able to touch the red probe on the positive side and the black probe on the negative side of your car's battery. You do not need to unhook the clamps to your car's battery to check the voltage.
Question:	How long are the leads
Answer:	have not used the leads yet. so i would have to guess about 3'.
Question:	Does this meter have a tone that sounds when continuity is sensed
Answer:	Is does have continuity beeps but you must press the select button to make the meter go into continuity mode with the dial on the ohms/ continuity setting.
Question:	where is this made
Answer:	This multimeter is manufactured in China. We AstroAI as a US brand owner, do sell and ship either from Amazon warehouses directly or from our CA office or warehouse. We are formally authorized to sell on Amazon with official verification.

Product features

AstroAI 4000 Counts TRMS Digital Multimeter

The AstroAI 130B Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Non-Contact Voltage Detection (NCV)

Just place the probe near outlets, sockets, terminals etc. to test voltage presence without the use of test leads and actively getting involved with potentially live wires.

1.5V/9V/12V Battery Voltage Tester

Unique battery real-time voltage test function; When you select the battery test function, you will get the real-time accurate voltage data of the battery

Continuity Test

Connect the test leads to two points on the circuit being tested. If the line is connected, the built-in buzzer will sound and the value will be displayed on the LCD screen.

Backlit LCD and Data Hold

Creature comforts make this DMM easier to use in both dimly lit and bright environments. Combine the integrated kickstand and Data Hold function together for a smoother troubleshooting experience.

Low Battery Indication

An indication will be given when the battery is low to replace the battery. Don’t stop halfway through a job just because a battery needs to be replaced.

Auto Shut Off

The Meter will automatically shut down after it is idle for an extended period. To turn it back on, just switch the rotary dial and get back to work.

Intelligent Anti-Burn and Dual Fuse

Built-in F500mA/600V and F10A/600V explosion-proof ceramic fuse tubes offer protection across all measurement ranges. Double Protection, more secure and reliable.