12 best breaker testers

A breaker tester, in the context of electrical testing and maintenance, is a specialized tool used to assess the performance and functionality of circuit breakers. Circuit breakers are crucial components in electrical systems, as they protect against overcurrent and short-circuit faults. Here's what you should know about breaker testers:

Purpose: The primary purpose of a breaker tester is to evaluate the ability of a circuit breaker to open and close its contacts effectively under various operating conditions. This testing helps ensure that the breaker can perform its protective function reliably.
Types of Breaker Testers: Breaker testers come in various forms, including handheld portable devices and more complex test sets used in industrial or utility settings. These testers generate controlled electrical signals to simulate different fault conditions and test the breaker's response.
Testing Parameters: Breaker testers assess several critical parameters of circuit breakers, including:
- Timing: They measure the time it takes for the breaker to open and close when subjected to specific fault conditions.
- Contact Resistance: Testers check the resistance of the breaker's contacts to ensure they make a secure electrical connection when closed.
- Coil Current: They monitor the coil current to verify that the breaker's trip and close coils are functioning correctly.
- Voltage and Current Waveforms: Advanced testers can capture and analyze voltage and current waveforms to identify any anomalies or irregularities.
Safety: Using breaker testers involves working with electrical equipment, which can be hazardous. Testers typically include safety features to protect users and ensure safe testing procedures.
Maintenance and Troubleshooting: Breaker testers are essential tools for maintaining and troubleshooting electrical distribution systems. Regular testing can identify issues with circuit breakers before they lead to more significant problems or system failures.
Calibration: To ensure accurate and reliable testing results, breaker testers need to be calibrated periodically to maintain their accuracy.
Applications: Breaker testers are used in various industries, including power generation, transmission, and distribution, as well as in industrial facilities, to verify the proper operation of circuit breakers in critical electrical systems.
Reporting: Many breaker testers provide reporting features that document the results of the tests performed, helping maintenance teams keep records of breaker performance and identify any potential issues.

In summary, breaker testers are essential tools for assessing the performance and reliability of circuit breakers in electrical systems.They play a crucial role in ensuring the safety and functionality of electrical distribution systems by detecting and addressing potential problems before they can lead to electrical faults or failures.

Below you can find our editor's choice of the best breaker testers on the market

Klein Tools ET310 AC Circuit Breaker Finder with Integrated GFCI Outlet Tester

Klein Tools

Based on 3 reviews Check latest price

Product description

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. Circuit Breaker Finder locates the correct breaker in a panel. Tester consists of two parts: a Transmitter and a Receiver. GFCI Outlet Tester integrated in receiver. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411). Receiver powers off automatically after approximately three minutes of non-use to conserve battery life. Transmitter is powered by the circuit when connected to the electrical outlet or fixture. Low battery indicator. Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery. Built to withstand a 6.6-Foot (2 m) drop. CAT II 120V safety rating. Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver). For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
Receiver delivers clear visual and audible indications when the correct breaker has been located
Operates on 90-120V AC circuits
Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices

User questions & answers

Question:	klein tools 69411 is this part available
Answer:	No half sizes
Question:	Why don’t they have one for high voltages
Answer:	Yes. I've had mine a couple months and wear them multiple times a week. Still no leaks.
Question:	The et-300 claims a range of 1000 ft, i cannot find that spec on the et-310. what is the range on the newer model
Answer:	I would go up to 14
Question:	Does this tester have a variable sensitivity wheel? Or is that indeed why some people said it was nearly worthless determining the correct breaker
Answer:	They are lighter than my steel toe work boots, but really, I wear a size 14, no footwear is light for me, besides flipflops.

Product features

AC Circuit Breaker Finder with Integrated GFCI Outlet Tester

Klein Tools ET300 Circuit Breaker Finder / Receptacle Tester Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet

Klein Tools

Based on 3 reviews Check latest price

Product description

With this digital circuit breaker finder quickly, accurately, and automatically find the corresponding circuit breaker of any 120V standard electrical outlet. The flashing arrow indicator lets you quickly identify when you've got a hit. The strong transmitter reaches up to 1000 feet. The auto power-off feature saves battery life and gives you one less thing to worry about. Circuit Breaker Finder has 90 - 120V operation. Microprocessor controlled for more reliable identification. Includes a 2-year warranty. Auto power-off feature saves battery life. Accessory kit (Cat. No. 69411, sold separately) includes light socket adapter and alligator clip assembly. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

This circuit breaker finder can find the corresponding circuit breaker of any 120V standard electrical outlet quickly, accurately, and automatically
Flashing arrow indicator for easy identification
Strong transmitter reaches distances up to 1000-feet
90 to 120V operation
Microprocessor controlled for more reliable identification

User questions & answers

Question:	Can i plug it in and see what Outlets are on that circuit breaker can I use the finder down the line at the different outlets on that breaker to trace
Answer:	Take to shoe repair they can fix
Question:	Does the plug in part have an indicator light on it to confirm its operational and that the outlet is live
Answer:	yes .and good fit
Question:	can this item find the breaker if the power is off
Answer:	Yes, and a great boot for the money. Warm and light weight.
Question:	How dose this work
Answer:	My husband wears a 10 and I purchased a 9. He loves them! Best pair I've ever Gotten him.

Product features

Circuit Breaker Finder, Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet

Quickly, accurately, and automatically find the corresponding circuit breaker of any 120V standard electrical outlet with this digital circuit breaker finder. The flashing arrow indicator lets you quickly identify when you've got a hit. The strong transmitter reaches up to 1000 feet.

Extech - 1218G94EA CB10 Circuit Breaker Finder

Extech

Based on 1 reviews Check latest price

Product description

Locates the correct circuit breaker or fuse without turning off the power. Simply plug the transmitter into an outlet and trace for the correct breaker at the electrical box. Transmitter also verifies wiring and tests GFCI operation. Bright red and green LEDs indicate if receptacle is correctly wired or will indicate which of the 5 fault conditions exists. Convenient storage position for transmitter/receptacle tester. Complete with Receiver, GFCI Transmitter, and 9V battery.

Simply plug the GFCI Transmitter into an outlet and trace for the correct breaker at the electrical box
IR resolution - 43,200 (240x180) pixels - far exceeds RESNET standard; Measurement modes include 3 Spots, 3 Area Box, Isotherm, Auto Hot/Cold spots
UL Listed and CE approved
Tests GFCI circuits
LED indication of 2 test conditions and 5 wiring faults

User questions & answers

Question:	Can this trace a wire routing through the wall
Answer:	It's configured for 120 though you'd have to read the specs to see a out 240.
Question:	I have outlets wired in series: some NM. some metal-shielded. Can I detect signal in accessible wires "halfway" to the breaker to confirm route
Answer:	That would be a bit more difficult. You would have to replace the bulb with one of those socket adapters that have the socket and outlets to plug in cords. I think that would work to find the right breaker since you could plug in that part of the detector.
Question:	Will this product detect a bootleg ground
Answer:	No, the circuit must have power to generate a signal that is traceable to the breaker panel.
Question:	Can you use this to trace the outlet to its circuit breaker if the circuit breaker is damaged or off
Answer:	There is nothing on the product to indicate that it is. The item is UL approved, sturdy, and works very well. You can find Sperry on Facebook and ask your question there.

Product features

Fast operation

Quickly locate 110V to 125VAC circuit breakers and fuses.

Multi-sensory signals

Flashing LEDs and audible beeper for circuit breaker indication.

Adjustable sensitivity

Variable Sensitivity adjustment to pinpoint correct circuit breaker.

Professional use

Locate branch circuit breakers without flipping breakers to other circuits, confirm proper wiring during electrical wiring installation or repair, and test receptacle ground fault operation.

Portable

Transmitter and Receiver snap together for easy storage.

Easy to read GFCI test indicators

Bright Red and Green LED’s indicate if receptacle is correctly wired or six fault conditions.

Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester ET310 & Circuit Breaker Finder Accessory Kit, Circuit Breaker Leads, Circuit Breaker Adapters Klein Tools 69411

Based on 109 reviews Check latest price

Product description

Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester ET310

Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Teste

Circuit Breaker Finder Accessory Kit, Circuit Breaker Leads, Circuit Breaker Adapters Klein Tools 69411

Circuit Breaker Finder Accessory Kit

Product 1: This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
Product 1: Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
Product 1: Receiver delivers clear visual and audible indications when the correct breaker has been located
Product 1: Operates on 90-120V AC circuits
Product 2: For use with ET300 and ET310 Digital Circuit Breaker Finder
Product 2: Light socket adapter for finding the correct circuit of a lighting fixture
Product 2: Alligator clip adapter enables use on bare wires
Product 2: Includes standard 3-prong to 2-prong grounding adapter

User questions & answers

Question:	Case or carry bag included
Answer:	A: I have a door bell button as a garage door opener. It was there when I bought the house. I’m actually looking for a nicer looking switch on amazon right now to replace it and I came across this question.
Question:	That light bulb adapter does not have a ground so how does it work with that tracer
Answer:	The measurements are 3 x 3/4 x 3/4 inches. Screws are 1 inch long and 2 1/8 inches apart.

Sperry Instruments CS61200P Electrical, 120V AC, 60Hz, Includes: CS61200AS Light and Switch, 2 Pc Circuit Breaker Finder and Accessory Kit, As shown in the image

Based on 1 reviews Check latest price

Product description

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

From the Manufacturer

Sperry Instruments Circuit Breaker Finder Kit. Durability, accuracy, and safety are the hallmark of tried and true tester products. The Sperry Instruments name has been synonymous with quality, precision, and dependability for over forty years.

Quickly and easily identify correct circuit breaker or fuse protecting a specific electrical circuit
Designed for operation at 120V AC, 60Hz
Audible alert and bright LED visual indication
Magnetic back attaches to electrical panels for inchhands-free inch operation
When used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring
Integrated lead and probe storage
Operates from one 9 volt battery

User questions & answers

Question:	Btw amazon photo shows 2 pack logo! even though you only get one set
Answer:	NO! It is, and the specs say, it is for 120vac. House wiring is 120vac. If you are wondering about 220vac, then you are probably thinking (giving you the latitude here, that you know about 220vac house service (which can be either 2 or 3 phase). Only one of those phases is used within the normal house receptacles. Even if you just look at the regular 3 prong plug between the two larger devices, you will see that is is the expected 120vac plug. A 220vac plug looks quite a lot different. Anyone trying to diagnose the (2 or 3) multi-phase service would typically just diagnose one phase at a time. So this could be used to troubleshoot 220vac - AS LONG AS you are just diagnosing one phase at a time. If you don't have clue as to what I have just spoken about then leave it alone! You are, in the least, going to waste your money, or burn out something, and at worst, possibly burn your house down. Get an electrician to help you out.
Question:	Does anyone else have issues with the sensitivity of this unit? I can't pinpoint a breaker, just a range of at least 5-6 push it to max
Answer:	Yes! Do this at your own risk, obviously. For some of the circuits in my house, the signal from the transmitter was too weak for the detector to pick it up through the breaker switch itself, but scanning the wires always worked.
Question:	Will this work on220 volt
Answer:	If you just need to test for continuity then you can put an rj45 jack on each end and tone one end and test the other you can see if you have continuity
Question:	If you take the breaker plate off can you get a better indication on a specific wire going into a breaker
Answer:	you will still have to connect the generator to the cable somewhere. since they are low voltage it should work.

Product features

Sperry Instruments CS550A Circuit Breaker Finder

Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using "trial and error" until you hit the right one. This Circuit Breaker Finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 volt battery required for the receiver unit.

Sperry Instruments CS61200P Circuit Breaker Finder Kit

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The custom probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

Ideal Industries - IDI61534 IDEAL INDUSTRIES INC. 61-534 Digital Circuit Breaker Finder with Digital Receiver and GFCI Circuit Tester

Ideal Industries

Based on 738 reviews Check latest price

Product description

The task of locating AC circuits is now made quick and easy thanks to IDEAL Electrical. No more guessing or trial and error when it comes to locating the correct circuit breaker supplying power to an AC outlet or lighting fixture. Positively identifies circuit breakers and fuses without service interruption. Digital Receiver & GFCI Circuit Tester. Non-contact voltage sensor from 80-300VAC automatically and quickly finds correct breaker. Transmitter works on 120VAC circuits. Proper wiring is crucial to ensure safety and performance of Branch circuits. From a safety perspective, shock hazards and fires are mainly due to poor installation or failure of protective devices, such as GFCIs. If the receiver is left on and not utilized for 10 minutes (no energized AC circuit or transmitter signals are detected), it will automatically shut down to conserve its battery life.

From the Manufacturer

IDEAL 61-534 Circuit Breaker Finder with GFCI Tester

QUICK AND EASY CIRCUIT IDENTIFICATION: The task of locating AC circuits is now made quick and easy thanks to IDEAL Electrical. No more guessing or trial and error when it comes to locating the correct circuit breaker supplying power to an AC outlet or lighting fixture. Positively identifies circuit breakers and fuses without service interruption.
AUTOMATIC CIRCUIT IDENTIFIER: Proper wiring is crucial to ensure safety and performance of branch circuits. From a safety perspective, shock hazards and fires are mainly due to poor installation or failure of protective devices, such as GFCIs.
RECEIVER AUTO POWER OFF: If the receiver is left on and not utilized for 10 minutes (no energized AC circuit or transmitter signals are detected), it will automatically shut down to conserve its battery life. Also features low battery detection so that you can ensure your Digital Circuit Breaker Finder is always charged and ready to use. If the battery voltage is below 7.3 volts, the receiver will beep three times and turn itself off.
TRUSTED BRANCH CIRCUIT ANALYSIS AND TESTING TOOLS: IDEAL has a long history of providing the professional electrician with the tools and knowledge required to safely and efficiently verify and analyze Branch Circuits. So, whether you are; conducting routine measurements, testing installed devices or the integrity of a Branch Circuit, locating a breaker, or tracing wires, IDEAL has the tools for the job.
PRODUCT DETAILS: Digital Receiver & GFCI Circuit Tester. Non-contact voltage sensor from 80-300VAC automatically and quickly finds correct breaker. Transmitter works on 120VAC circuits. Tests GFCIs. Verifies wiring configuration.

User questions & answers

Question:	Will this product be able to identify more than which outlets are related to a particular circuit; such as light switches, oven vent fans, etc
Answer:	That 69411 catalog number is for the: "Circuit Breaker Finder Accessory Kit". That was available when I purchased mine but I don't know about now with this virus problem. I do not believe that amazon will answer your question in this manor. Probably the only way to find out from Amazon is to just try ordering it and see what your response will be.
Question:	I have 220vac outlets, if the remote plug-in unit only works with 110vac can I go one side to ground and simulate a 110 circuit to find each breaker
Answer:	I am not sure but I would suspect code for high voltage lines should be properly marked for identification.
Question:	Does the power have to be on for the tester to work
Answer:	I don't know but im sure that the circuit wiring configuration along with the load center configuration will effect it's operating range. There are several variables that can effect the tester's operation.
Question:	Does it work for higher voltage like 220 v
Answer:	Does not have a sensitivity wheel, I’ve had no issues with it usually within one breaker its spot on. Just have to hit reset if u skip over the correct one to clear memory before re scanning

Product features

Electrical Testing

We’ve been helping electricians safely verify and analyze electrical systems since 1924. Our testers are highly accurate and respected across the world. From our innovative circuit tracers to reliable voltage testers to clamp meters, IDEAL has the tools to help you get the job done safely and efficiently.

We’ve been committed to craftsmen for more than 100 years. Whether you’re the electrical contractor or datacomm technician, production engineer or plant manager, we know the job .

WE ARE IDEAL ELECTRICAL: POWERING THOSE WHO POWER OUR WORLD

J. Walter Becker’s founding principles remain the guiding force behind our partnerships with the world's leading distributors, a state of the art delivery system around the world, outstanding customer and technical support and variety of operational benefits designed to save you time and money.

We're proud of the way we do business, and always have been. The work we do through IDEAL Electrical is just one more way we are building an IDEAL world.

Circuit Breaker Finder with GFCI Circuit Tester & LED flashlight: 3-in-1 Circuit Breaker Finder Multitool to quickly identify the right Circuit Breaker is powering an outlet accurately by VersativTECH

Based on 168 reviews Check latest price

Product description

Introducing the VersativTECH Circuit Breaker Finder with GFCI Circuit tester and LED flashlight tool with all the features you need to identify the corresponding LIVE circuit breaker supplying power to any 90-125V AC standard outlet. With its fully automatic microprocessor for accurate readings, LED flashlight, and GFCI Outlet Tester, save time and simplify challenging rewiring projects. It is the perfect home inspection tool for electricians, contractors, tradeperson, and home owners.

Microprocessor Controlled: Avoid frustrating trial and error by make locating corresponding live circuits a simple easy and accurate one person task! The smart switch with auto-off features helps extend battery life and low battery indicators always ensure you are prepared in advance.
GFCI Circuit Analysis Outlet Tester: Circuit Analysis Socket Tester included to save time identifying the 5 common electrical outlet wiring faults.
Built in LED Flashlight: No worries getting stranded in the dark; the advanced design includes a built-in LED light making this a must-have multi tool for any toolbox.
Bonus Carry Case Included: Ensure the circuit breaker finder receiver and GFCI transmitter are always together. Keep it organized, clean, and safe in your tool box and bags.
Risk Free: We only partner with quality manufactures to bring great products at a fantastic great value. 100% Satisfaction is guaranteed and we offer a 1 year free replacement warranty.

CIRCUIT BREAKER FINDER KIT INCLUDES:

Power Supply: 1 x 9V Battery
Weight: Receiver 150g (5.29 oz) & Transmitter 48g (1.69 oz)
Receiver Dimensions: 197 x 52 x 40mm (7.76 x 2.05 x 1.57 in)
Transmitter Dimensions: 81 x 42 x 32mm (3.19 x 1.65 x 1.26 in)
Safety Rating: CE CAT II 600V

ADVANCED 3-IN-1 MULTI TOOL; ALWAYS BE PREPARED with LED flashlight, GFCI circuit tester, & Circuit breaker Locator Tools in one kit for the best value kit on the market
IDENTIFY WIRING FAULTS FAST; Save time with the GFCI tester to identify 5 common electrical outlet wiring faults quickly, essential to all home owners & electrician tool kit
READY TO GO OUT OF THE BOX; 9v battery & BONUS carrying case included with Circuit Breaker Finder receiver & GFCI circuit tester transmitter to keep everything together, clean, and safe; Ensure you're always prepared as a home owner, electrician, contractor, tradesperson, or outlet tester
BONUS CASE INCLUDED; 9v battery & BONUS carrying case included with Circuit Breaker Finder, LED flashlight & GFCI circuit tester to keep everything clutter-free, clean, & safe; ALWAYS BE PREPARED as a home owner, electrician, contractor, tradesperson, or DIYer
RISK FREE; 100% Satisfaction Assurance. We only partner with quality manufactures to bring great products at an amazing value and provide a 1 year manufacturer warranty on this Circuit Breaker Finder

User questions & answers

Question:	Will this tester test the breaker itself, or will I need a continuity tester to test the breaker
Answer:	Your question is unclear, but I think you want to use it backwards. The unit has a transmitter, which you connect at an outlet (via duplex plug, clipleads, or standard light-bulb-socket adapter). Then at the service panel, you run the receiver down the circuit breakers, and it tells you (most of the time) which CB feeds that outlet. It does not allow you to select a CB and then use the device somehow to find all outlets that CB feeds. (I would love that feature as well.)
Question:	Extravie la pieza que se enchufa, hay manera de reemplazarlo
Answer:	Yes there is a red light that comes on when the plug is plugged into a live outlet.
Question:	Does the electrical circuit have to be powered up. I am trying to trace unused circuits
Answer:	No the transmitter needs the power from the outlet to send the signal down the line. The transmitter is the device you plug into the outlet.
Question:	Thank you for answering; I also need to know what the red button on the transmitter is for
Answer:	The small transmitter plugs into a target outlet and injects current pulses into the line, which can be detected by the receiver probe when held close to the path that the power goes through, which includes the breaker. The receiver antenna is most sensitive when oriented with the face perpendicular to the path, so that's why it should be held with the face sideways, with the up arrows pointing up. Whenever the bottom is pressed, it resets the sensitivity to the highest level, and each time it detects a strong signal, it reduces the sensitivity so it will ignore any lower level signals it encounters from that point on. That's the reason for the multiple passes, to keep looking for the strongest level signal and progressively reducing its sensitivity until it will only sound off on the strongest one, which is generally the target. You can go back and forth, just try to hold the unit at the same point going down the line of breakers to get an equal reading on all the breakers. Basically you just want to reduce the unit's sensitivity by having it pass by any strong signals. If you accidentally push the button while handling it, you just need to run through them again. If you find the target, you could flip that breaker and run through another pass, too confirm it no longer sounds off, which it shouldn't, if it's no longer getting power. Sometimes you may get two breakers that consistently sound off due to the wiring paths being close to each other and coupling the signal over. Shutting off one would tell you which one it actually is. Get a small rubber band and wrap it at the inner lip of the button to avoid inadvertent presses. I did that on the Circuit Detective one from HF, and it now requires a firm press instead of just a light touch.

Sperry Instruments STK001 Non-Contact Voltage Tester (VD6504) & GFCI Outlet / Receptacle Tester (GFI6302) Kit, Electrical AC Voltage Detector, Yellow & Black

Sperry Instruments

Based on 3 reviews Check latest price

Product description

Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The electrical testers below accurately identify and capture circuit continuity and voltage measurements. These testers are ideal for any electrical professional or to have at home.

From the Manufacturer

Non contact sensing circuit.

VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)
DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection (VD6504)
RATED: CAT Rating III 300V, C-UL US (GFI6302), CAT Rating III 1000V, IV 600V, (VD6504) 10 ft Drop and 250 lb Crush (GFI6302 and VD6504)

User questions & answers

Question:	The volt sensor is so sensitive it goes off near an outlet. Is that normal? I thought I could stick it in the slots to find out which side was hot
Answer:	Yes, you can insert the tip of this tool into the slots of an outlet then press the button and it will tell you which side is hot. You can also use it to test the wires in a circuit if you are unsure which is the hot lead. If the wires are connected to the switch, outlet etc touch the tip to the bared wire at the contact point and it will tell you if it is hot. You can also just touch the insulation covering the wires to get a reading too. Try to keep the wires you are testing separted by a few inches if possible, this will help prevent any false reading you might get by voltage seepage from the insulated hot lead. If you didn't know - the hot wire in a circuit is usually black, red or maybe some other dark color, the white is the neutral or return and the green is the ground. Start by testing the dark wire first but as a precaution be sure the check the white also - someone may have wired in incorrectly and that could be a hot lead. I've had - well had, until I left it someplace - one of these for years and it's a good useful tool. So I gotta get another one now, and I'm getting one of these.
Question:	Can this be used as a circuit breaker finder
Answer:	You could use them to find a circuit breaker, if you had someone to watch the tester, while you went through your panel turning off and on your breakers untill you found the one that controlled that circuit. If you didn't want to do that then you will need to buy an circuit breaker finder kit.
Question:	does this tester work on low-voltage landscape lighting wires
Answer:	The non contact voltage tester will.
Question:	can it tell the diffrence between 220v and 110v
Answer:	If you can’t tell the difference 110v and 220v .You Dont Need A Meter.

Product features

Non-Contact Voltage Tester

This unit allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings.

Sperry Instruments GFCI Outlet Tester

When you need a GFCI Outlet tester that's compact, provides comfort for repeated use and tests seven different wiring conditions with a press of a button, reach for the Sperry GFI6302.

GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets, Klein Tools RT250

Klein Tools

Based on 4 reviews Check latest price

Product description

The RT250 is an electrical receptacle tester that tests the wiring conditions at an electrical outlet and inspects GFCI devices. The LCD displays the voltage, identifies the wiring fault, and the time required to trip a GFCI device. It is designated for use with North American 3-wire 120V electrical outlets. GFCI electrical circuit tester inspects GFCI devices. Large LCD display shows voltage, wire faults, and GFCI trip time. Identifies common wiring faults on North American 120V outlets. Bright green and red LEDs illuminate for visual indicators. CAT II 135V safety rating. Durable 6.6-Foot (2 m) drop protection. For use on 3-wire, North American 120V electrical outlets only. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

GFCI RECEPTACLE TESTER FEATURES LARGE LCD READOUT. View results instantly without the need to look at a chart to understand results. In addition to a clear LCD readout, bright green and red LEDs illuminate to show correct or faulty wiring
TEST TRIP TIME OF GFCI IN SECONDS. Find out if the trip breaker is functioning and how long it takes to trip
DETECT AND IDENTIFY COMMON WIRING FAULTS. Conditions are Wired Correctly, Open Ground, Open Neutral, Open Hot, Dual Open (Neutral & Ground), Reversed Hot/Ground, and Reversed Hot/Neutral. The Dual Open condition is patent pending
AUTO-HOLD FUNCTION IS CONVENIENT FOR HARD-TO-REACH OUTLETS. Simply remove tester to view the reading
SAFE AND DURABLE TESTER FOR INSPECTIONS IN NORTH AMERICAN 120V OUTLETS. CAT II 135V safety rating and 6.6-foot (2 m) drop protection

Advanced with Voltage Display GFCI Outlet Tester, Kecheer 90-250V Electrical Socket Tester Automatic Electric Circuit Polarity Voltage Detector Breaker Finder, Electrical Receptacle Tester US Plug

: KKmoon

Color: Black

Model: HT107B(US)

Material: Flame Retardant ABS

Operating Voltage: 90~250V/45~65Hz

Phase Voltage: 90~250V/45~65Hz

Leakage Voltage: 0~99V/45~65Hz

Accuracy: ± (2.0%+2)

GFCI Test: ＞5mA (US Plug)

GFCI Working Voltage: 110V±20V

Working Environment: 0℃ ～ 40℃, 20% ～75%RH

Storage Environment: -10℃ ～ 50℃, 20% ～80%RH

Item Size: 68 * 65 * 60mm / 2.7 * 2.6 * 2.4in

Item Weight: 74g/2.6oz

Packing List:

1 * Electric Socket Tester

Product information

Technical Details

Based on 34 reviews Check latest price

Product description

Features:

【Upgraded Electric Socket Tester】 --- Advanced socket tester for rapidly detecting whether the socket's wire connection is correct or not. Compact size, light weight and convenient to use. With voltage backlight LCD display for testing voltage.

【PLUG & PLAY】 --- This plug socket tester is designed with RCD/GFCI Test Button, One Click to know the working state of the leakage protector. Perfect for protect your security against the risk of electric shock.

【Bright LED Display】 --- Light patterns are well labeled on the back of the device itself. The Red LED indicators can be light up clearly even in strong sunlight also be used in the dark, making you read it fast.

【6 LED Light Patterns】--- With 6 easy to read indicators to indicate the state of the socket, easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse, Live/Ground Reverse, Live/Ground Reverse, Missing Ground.

【Wide Application】- This electrical receptacle tester can be widely used for electric maintenance testing, office sockets testing, power strips testing and wall sockets testing in school, laboratory, factory and other social field. Home improvement acceptance and safety inspection，It saves you lots of time in testing problems with sockets.

Specification:

Brand Name: KKmoon

Color: Black

Model: HT107B(US)

Material: Flame Retardant ABS

Operating Voltage: 90~250V/45~65Hz

Phase Voltage: 90~250V/45~65Hz

Leakage Voltage: 0~99V/45~65Hz

Accuracy: ± (2.0%+2)

GFCI Test: ＞5mA (US Plug)

GFCI Working Voltage: 110V±20V

Working Environment: 0℃ ～ 40℃, 20% ～75%RH

Storage Environment: -10℃ ～ 50℃, 20% ～80%RH

Item Size: 68 * 65 * 60mm / 2.7 * 2.6 * 2.4in

Item Weight: 74g/2.6oz

Packing List:

1 * Electric Socket Tester

【Upgraded Electric Socket Tester】 --- Advanced socket tester for rapidly detecting whether the socket's wire connection is correct or not. Compact size, light weight and convenient to use. With voltage backlight LCD display for testing voltage.
【PLUG & PLAY】 --- This plug socket tester is designed with RCD/GFCI Test Button, One Click to know the working state of the leakage protector. Perfect for protect your security against the risk of electric shock.
【6 LED Light Patterns】--- With 6 easy to read indicators to indicate the state of the socket, easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse, Live/Ground Reverse, Live/Ground Reverse, Missing Ground.
【Bright LED Display】 --- Light patterns are well labeled on the back of the device itself. The Red LED indicators can be light up clearly even in strong sunlight also be used in the dark, making you read it fast.
【Wide Application】- This electrical receptacle tester can be widely used for electric maintenance testing, office sockets testing, power strips testing and wall sockets testing in school, laboratory, factory and other social field. Home improvement acceptance and safety inspection，It saves you lots of time in testing problems with sockets.

Product information

Technical Details

Manufacturer

Kecheer

" }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.6", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B08HQCC4MP?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "13.99", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": KKmoon

Color: Black

Model: HT107B(US)

Material: Flame Retardant ABS

Operating Voltage: 90~250V/45~65Hz

Phase Voltage: 90~250V/45~65Hz

Leakage Voltage: 0~99V/45~65Hz

Accuracy: ± (2.0%+2)

GFCI Test: ＞5mA (US Plug)

GFCI Working Voltage: 110V±20V

Working Environment: 0℃ ～ 40℃, 20% ～75%RH

Storage Environment: -10℃ ～ 50℃, 20% ～80%RH

Item Size: 68 * 65 * 60mm / 2.7 * 2.6 * 2.4in

Item Weight: 74g/2.6oz

Packing List:

1 * Electric Socket Tester

Product information

Technical Details

Manufacturer

Kecheer

" } } }

Sperry Instruments GFI6302 GFCI Outlet/Receptacle Tester, Standard 120V AC Outlets, 7 Visual Indication/Wiring Legend, Home & Professional Use, Yellow & Black

Sperry Instruments Inc

Check latest price

Product description

Sperry Instruments GFI6302 GFCI Outlet/Receptacle Tester, Standard 120V AC Outlets, 7 Visual Indication/Wiring Legend, Home & Professional Use, Yellow & Black

1
1
VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)
DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection (VD6504)

CaseSack Circuit Breaker Finder Consolidation case for Klein Tools ET310 AC Circuit Breaker Finder, Integrated GFCI Outlet Tester, RT310 Receptacle and Accessory Kit

Check latest price

Product description

all in one Circuit Breaker Finder protective case for Klein Tools ET310 AC Circuit Breaker Finder, Integrated GFCI Outlet Tester and Accessory Kit

also universal for Ideal Industries - IDI61534, PTE Wire Tracer & Circuit Tester, VersativTech Circuit Breaker Kit

Mesh pocket for other accessories

Compact and storage easy case

Easy to go detachable wrist strap

Note: Protective Case ONLY, device or accessories NOT INCLUDED ( for illustration only)

Perfect for: consolidation case for CaseSack Circuit Breaker Finder Consolidation case for Klein Tools ET310 AC Circuit Breaker Finder, Integrated GFCI Outlet Tester, RT310 Receptabcle and Accessory Kit, Mesh pocket for other accessories
Featured handy caser: all in one case for ction
Assured Protection: Semi-hard carrying case protecting the device from shock, shake, scratch. PEVA materials with pressure or hit absorbing and water resistant
User friendly design: Strong compact light weight case with featured handle and shoulder strap. Good for home storage and travel carrying
Worry-free Guanrantee: CaseSack offer 100% refund with quality problem. Only protective case for sales only, Device or accessories sold separately. CLICK the orange button to buy. Share with your review later on.