14 best motion activated switchs

Product description

Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turns the lights on when you enter the room and off when you leave
• Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
• Optional: senses daylight so lights do not turn on when there is enough natural light in the room
• Programmable time-out of lights - 1, 5, 15 or 30 minutes
• Works with all bulbs types; up to 250-Watt incandescent, halogen, electronic low voltage 200-Watt magnetic low voltage 150-Watt CFL/LED 2 Amp ballasts
• Single-pole only; great for small rooms like kitchens, laundry rooms and closets
• Installs in as little as 15 minutes; no neutral required
• Includes maestro sensor switch; coordinating wallplate sold separately

User questions & answers

Question:	How do I know if I need this 250W or the similar 600W switch? Are they interchangeable
Answer:	Depends on use. Lights and Ceiling fans, 250w is fine. If you have a Electric ceiling heater That requires more watts, then the 600w I would use. Hope this helps.
Question:	Will the motion sensor be set off by a small (toy size - 10 lbs) dog
Answer:	I have mine installed in a small walk-in (6 ft x 5 ft) closet and my 10 lb cat triggers it all the time, kind of annoying when it happens at 1 am. I just close the door to preven this from happening.
Question:	Will this work as... Enter room and I manually turn on the light and then the unit automatically turns off the light after a set time of inactivity? I only want it to turn off the light
Answer:	Follow up question on the previous answer....So if the unit turns off the light, is the actual switch toggled back to the "off" position? So that the next time someone walks in the door, they have to again toggle the switch back to the "on" position?
Question:	I don't get the,"No neutral required." A neutral is always required. What am I missing here
Answer:	I was an electrical engineer for Lutron back in the 1980's. Many dimmers and electronic switches like this one do not require a neutral wire to work. This is not a mechanical switch but an electronic one. It uses a silicon switching device called a triac which turns the light on and off 120 times per second, just like every dimmer ever made. During the brief period 120 times/second when the triac is off, the device draws a small amount of power through the light bulbs it controls, and uses this small amount of power to charge a capacitor, which you can think of as a rechargeable battery. Thus there are many wallbox products, such as most dimmers, that do not require a neutral wire to operate. Nor does it put any power intentionally to ground, which would be against the electrical code and thus could not be sold. The reason other companies require a neutral wire is because they were not designed by companies that also make dimmers as their engineers probably do not realize the device can be designed to draw sufficient power using a triac instead they use a relay, which would produce an audible click when switched on, where as a triac device would make no sounds when turning on and off. Hope this helps.
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Lutron Motion Sensor Switch

Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy and add simple automation to your home.

Garage

Lutron sensors are great when your hands are full and you can't easily reach the light switch.

Laundry Room

It's laundry day and clothes are piled high. Sensors installed in the laundry room gives you one less thing to worry about.

Kids Bedroom

Do you have forgetful children? Install a motion sensor and never worry about your kids leaving the lights on again.

• 🌟 100% REFUND GUARANTEE: Welcome order ECOELER Sensor Switch products. If you don't absolutely love our product, let us know and receive a full, no questions asked refund. During used, if our Motion sensors is broken, don’t working, please contact us, we will refund or pay a new one to you.
• 🌟 NEUTRAL WIRE REQUIRED, The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Allowing the lights to turn on from multiple switch locations in the room. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.
• 🌟  VERSATILE SETTINGS: The motion detector light switch features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.
• 🌟 OCC / VAC OPTION: The homekit light switch with Occupancy mode (Auto ON / OFF) and Vacancy mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fan accidentally left on all day.
• 🌟 CERTIFICATION: Smart motion sensor switch have UL Certified, FCC Listed and California Title 24 Compliant. Multiple certifications, Let the customers be assured.

User questions & answers

Question:	Does it come with accompanying wall plate
Answer:	I don't recall whether or not they do. However deco wall plates are low priced and available at all hardware stores. I am an electrician so I carry a few boxes of ten plates in my truck at all times. So if they didn't I grabbed a few to put on with the switches.
Question:	Can it be onstallwd with a 2nd swirch for a vent in a varhroom
Answer:	You could install one on the vent fan switch in the bathroom and have a separate one in a dual wall plate connected the the lights.. or wire both to the single switch.
Question:	Could this switch be activated by a cat if mounted at standard switch height
Answer:	Yes. It can be activated by a giant cat.
Question:	My box has two sets of hot, neutral, and ground wires. will this switch work? if yes, what is the setup
Answer:	Yes. If you test those two sets of wires with your multimeter, you'll likely see that one of the black wires is actually being turned on and off by the current light switch. If so, connect that black wire to this switch's red wire. Connect your always-hot black wire to this switch's black wire. Connect all three white wires together. Connect all three ground wires together.

• Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection
• Flexible timing setting from 2s to 360s for how long the light stays on.
• 0 to 7 meters detecting range and high sensitivity
• Easy to install. Widely used on motion-activated lighting, LED strips and others
• Energy-saving and low heat and low power consumption

User questions & answers

Question:	Would this work to control 12 v light in boat cabin. I need the light to turn off when no activity is present
Answer:	Would work but is on a timer so light would turn off after time is reached until movement triggers it back on. Could become a bit of a pain. Would be better if it came on when you came in and off when you left.
Question:	Should this be able to handle both a short (1-2ft) 12v led strip and a 12v fan (draws 0.14 amps) (would wire led and fan in series
Answer:	This sensor is particular for the led strips ,not sure what is your project ,please take a look carefully at the description see if fits .
Question:	I bought this and installed inside gun safe but it doesn't seem to turn the led lights off. any ideas? thanks
Answer:	There should be a setting under the back cover. One is for sensor distance, the other is for time. You may need to turn down the time adjustment.
Question:	V-24V, referring to input voltage or output voltage
Answer:	5V-24DC is both the input and the output voltage. This is merely a SWITCH which is motion-activated. YOU would supply the DC voltage from your power source.

Product description

The Westek MLC12BC-4 eliminates the need to fumble in the dark for a switch or pull string. This light control allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes. The motion lens can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning. The sensor has a wide, 100° detection zone and can detect motion up up to 25 feet away, making it perfect for laundry rooms, garages, living rooms, basements or attics.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• PROGRAMMABLE LIGHT CONTROL - Allows you to turn on lights, radios, and other small appliances in the home when motion is detected and can be programmed to turn off after 1, 2, 5, 10, or 20 minutes.
• MOTION ACTIVATED - 100 degree detection zone detects motion up to 25 ft away. Eliminates the need to fumble in the dark for a switch or pull string.
• WALL MOUNTABLE - Can either be mounted on a wall or placed in the included weighted base to sit on a table, counter, or any flat surface for optimal positioning.
• EASY-TO-USE - Simply plug the motion activated light control into a wall outlet and plug your lamp/device into light control. Position the motion sensor so it faces area you wish to sense motion and it is ready to use.
• PRODUCT DETAILS - 6 foot cord. For indoor use only. 120V 60Hz. 10A General Purpose. 240W Tungsten. ETL Listed Intertek 3154847.

User questions & answers

Question:	Does it work in the dark
Answer:	There is a red led sensor that lights up inside the unit, but it is behind a white mylar window. I've not been able to see it from outside the unit even in the darkest night. Only when the cover is up for testing or adjusting. No one knows it is on my gate pillar where it is hidden. I would definitely recommend this unit. I've had one for 10+ years.
Question:	Could I use this to power off a fan when triggered. and then have the fan turn back on after motion is not detected
Answer:	I'm not familiar with that Model but I can tell you that for $29 you can purchase a HT (Baofeng UV-5R) that you can program to receive the signal from the Dakota Alert unit. The Dakota systems use a common VHF signal that you can pickup with any VHF HT its called MURS frequencies - hope this helps.
Question:	Is there also a light sensor so if you plug in a small LED lamp it will only come on only when the room is fairly dark
Answer:	No. The 3000 Series and MURS are different units and are not compatible.
Question:	How is the sensor unit mounted
Answer:	You can use any brand of VHF high radio if you can set it to the MURS channel(s) and optional tomes of your choice. Ch1 151.820/Ch2 151.880/Ch3 151.940/Ch4 154.570/Ch5 154.600. Channels 1-5 are narrowband on Dakota brand radios. I use BAOFENG UV5R radios, they are programmable and inexpensive. Just be sure to have them programmed correctly to keep it legal.

• MOTION SENSOR LIGHT SWITCH – let smart sensor technology turn on your indoor lamps, radio and other devices when it detects motion. Features a 6 foot cord for ideal placement of the motion sensor device
• SAVE ENERGY – use the wall control to choose when the light turns off after motion stops. 1, 2, 5, 10 or 20 minute options are available to help reduce energy consumption. Forget leaving lights on all night
• IDEAL FOR EVERY HOME – dark hallways, corridors and rooms are perfect places for this device. It keeps the second outlet free for other appliances. The 6 foot cord is perfect if your wall outlet is hidden behind a cabinet or table
• WIDE DETECTION ZONE – detects motion up to 25ft away and features a 100 degree wide detection coverage zone. Providing light when you need it, it’s ideal for middle-of-the-night bathroom trips
• SUPER EASY TO INSTALL – plug into the wall socket and select the desired ‘off’ time, no tools or wiring is required. 120V, 1200 W general purpose, 1000W Tungsten. Works with LED, incandescent and CFL bulbs

User questions & answers

Question:	Can this be plugged into a uk travel adapter 3 pinned plug
Answer:	With the fixture you can use light bulbs that are significantly brighter than the Philips Hue bulbs currently available.
Question:	Why does mine turn on by itself
Answer:	Not 100% sure. However, they are indoor, outdoor lights and they are enclosed and sealed which makes then water resistant so I’d give it a shot.
Question:	Will west mlc4bc motion detector work w/microwave oven or only lights? can it shut off automatically in 2 minutes
Answer:	No
Question:	Can a stereo or sound device be activated by this sensor
Answer:	No and it’s a major drawback imho

Product description

Please note:

Please use stable voltage input(current does not change), or use 1A-2A (<4A) current, otherwise the light sensor is mistaken for daytime and the switch will not work properly! (This product review says it doesn't work for this reason)



Features:

*Portable product and USB DC 5V Power easy for installation. Apply to automatic lighting corridors, corridor, bathrooms, basements, warehouses, garages and other places,automatic ventilation exhaust fan and other automatic control

*Automatic Induction. The light will be activated at night or low-light environments

*Flexible timing setting from 15s to 360s

*Easy to install. Widely used on motion-activated lighting

*Energy-saving switch



Specification:



Working voltage: DC 5V-24V

Current: 2A

Sensor Method: PIR

Delay Time: 15s(default) to 360s (adjustable)

USB Cord Length: 0.3M

Detecting Range: 0-7M   (Best sensing distance 0-3M)

Casing: black/white cover and Fresnel lens

Size: 48*25*14mm

Net Weight: 29g



Product tips

1. The product works according to the doppler principle, Install indoors as far as possible to avoid rain and dust affecting the normal work of Fresnel lens

2. Please try not to exceed 2A, Most USB 5V chargers of mobile phone , computer USB ports,Power bank..etc can power it

3. When the indoor temperature is close to human body temperature, the sensitivity of the product will decrease

4. Work only in dark light or at night, not during the day ; Support day and night use, if you do not want to use during the day, please turn off the power



Package included：

1 x Mini USB PIR Motion Sensor Switch

• DC Mini USB Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection
• With light Sensor (Use at night or in dark light); Without light sensor (Used by day and night)
• 0 to 7 meters detecting range and high sensitivity, Timing setting from 15s to 360s
• Easy to install. Widely used on motion-activated lighting, CCTV Carmra , LED strips and others
• Applicable to the corridor, corridor, toilet, basement, warehouse, garage and other places of automatic lighting
• This Sensors switch will be tested by two laboratories before shipment

User questions & answers

Question:	Is this water proof or resistant
Answer:	This is not absolutely waterproof, and the product should be protected from rain as much as possible to use it for a longer time. By the way, please use a stable voltage input or use a current input of 1A-2A (<4A), otherwise when connected to a flashing LED or a device with a voltage change, the light sensor will make an error, which will cause the switch to fail to turn on and off normally. "Didn't work" in product reviews is exactly this problem
Question:	Could this be used to wake up a hard drive from sleep mode if it's plugged into the computer's USB port
Answer:	Hello, this is a sensor switch. if your driver reacts to a USB current change (wake up), then yes, it can be used to wake up a hard drive (The condition is to sense a person or an animal). thank you!
Question:	Can i disable PIR and use the light sensor instea
Answer:	Sorry, we haven't produced such a sample at present, and of course we don't recommend you to modify the circuit board. We are planning to produce optically controlled switches
Question:	Can i connect it to my computer? do i need any hardware or drivers? can be controlled from linux
Answer:	SURE, you can connect to your computer, and you NO need any hardware or drivers. This PIR sensore just need DC 5V-24V then can work. Because it doesn't transmit data, it's just an automatic switch. (It work by continuously detecting the infrared of people or animals )

Product description

Leviton IPS02-1LW 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, White. Compatible with Decora screwless snap-on wallplates (sold separately).

• Automatic ON/Automatic OFF provides 180 Degree field of view and 900 square feet of coverage
• 300W Incandescent / Halogen, 150W LED / CFL, 200VA Fluorescent, 1/6HP Motor loads
• Fits in standard wallbox and replaces single pole wall switch, no Neutral wire required for installation but ground wire is required
• Five year limited warranty

User questions & answers

Question:	Can anyone suggest a wall mount single pole p.i.r. switch with no manual "off" override? I have seen these in hospital restrooms with no visibl brand
Answer:	LEVITON MAKES 1
Question:	Anyone else finding the light ON without any motion? I open the garage door and see the light on at random times day/night. Garage is empty
Answer:	Mine also comes on when the HVAC starts or stops. I've also noticed that it comes on at night when I open my bedroom door. The door is completely out of sight from the switch. I can only imagine that the switch has an extremely sensitive pressure sensor in it also. I think I'll be replacing it since I think it comes on / off several times a day when we're not at home and the whole point was to try to save energy!
Question:	Will this completely turn off LED lights or is the light still slightly on even if the switch it off
Answer:	You must have ground connected or the LED light will stay slightly on. If you don't have a ground, it won't work correctly with LED bulb.
Question:	I don't want anyone to be able to turn off the light manually, is that possible
Answer:	It is not designed to do that but you can easily work around it. Remove the front face and on the bottom of the removed face are 4 black protrusions. Three are necessary clips but in the middle is a shorter rounded protrusion that does the pushing of the switch. With a nail cutter, or small wire cutter, flush cutter or the side of a small file hack off about 1 millimeter of that nub. Make sure the light in on (push the round black pad in the switch) on put this modified switch conve back on and test it to see if you removed enouch of the "pusher" that it will not activate when you push the button.

Product description

EASY INSTALLATION - simply plug in a lamp or other device to add safety and security to any space

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• MOTION SENSING LIGHT CONTROL - automatically turns on when you enter a room; never fumble for a light switch in the dark again
• WIDE RANGE - detects motion in a 100-degree radius and within 25 feet with a selectable 1, 2, 5, 10, or 20 minute auto-off
• MODERN STYLE - contemporary white finish and sleek design makes this a perfect accent that works with any decor
• VERSATILE - works with LED, incandescent, and CFL bulbs
• EASY INSTALLATION - simply plug in a lamp or other device to add safety and security to any space

User questions & answers

Question:	I received new version which turns on and off 5 times when I plug it in. Is this normal
Answer:	It’s possible it’s in test mode. Normally all motion activated devices will run a test phase upon initial use. There should be some toggle switches on the back to adjust the duration o time to remain on once activated by motion.
Question:	Do you plug this into the wall or do you have to wire it inside the outlet
Answer:	Just plug it into the outlet. No special wiring required.
Question:	after detecting motion what is the maximum operation time? I would like to set it to one hour. I see from one of the answers that it can be set to
Answer:	On the back it has a dial you can set for 1-2-5-10-or 20 minutes. These are the only options it gives you. Great product for the price.
Question:	Does it turn on during day light and does it have an option to use it when dark or for 24 hours whenever motion is detected
Answer:	Mine is in the kitchen and it will turn on, even if the main kitchen and dining room lights are already on. It doesn't seem to be as sensitive to moving bodies when the lights are already on. It's range is reduced. In the dark of night, I believe the sensitivity of sensor increases. Because someone walking into the living room 20 feet from the device, will trigger it on. In the day time, that doesn't happen. You have to be in the kitchen to trigger it. If you have pets walking around at night, they will most likely trigger it.

• ✅【Easy to install】 No neutral wire required (Grounding Wire is Required for Function) - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.
• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.

User questions & answers

Question:	Does this switch work with a fluorescent light
Answer:	Dear customer, this sensor switch could be worked with the fluorescent light up to 300W. Thank you for your question. ELEGRP Customer Service

Product features

ELEGRP LIGHTING CONTROLS

Multi-color to match your style

Large Coverage

The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.

Tips: Install the sensor switch about 4 feet from the floor to get better experience.

Multiple Setting Modes

—————————————————————————————————————————————————————————————————————

Set It Into An Occupancy Sensor Switch

OCC Mode: Automatic ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity to “1”, “2” or "3" as desired. DO NOT set the LIGHT to " • ".

—————————————————————————————————————————————————————————————————————

Set It Into A Vacancy Sensor Switch

VAC Mode: Manual ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity fully counterclockwise to " • " to disable automatic ON function.

The device will turn on the loads manually only and turn off the loads automatically when the time delay elapses.

—————————————————————————————————————————————————————————————————————

Hands Free Light Control

1. After wiring it for the first time, please wait 30 seconds for product booting. (Most sensor switches in the market have this feature)
2. Please make sure the product is correctly wired. The black wire of the sensor switch shall be connected to the Hot wire and the red wire shall be connected to the load. Please also make sure the sensor switch is connected to the ground.

The sensor will not function if it's false wired or un-grounded.

Product description

Please note:

The light sensor of TDHL-2025 W/B is very sensitive to variable currents. It is recommended to use with single color LED Strip, If used with flashing LED Strip, please adjust its mode to be static color Or Use greater than 3A(<6A) for your LED Strip. Otherwise it may not work





Features:



*Automatic Induction. The light will be activated at night or low-light environments by auto PIR motion detection.

*Flexible timing setting from 15s to 360s for how long the light stays on.

*You can adjust the detection distance by installing the position or adjusting the sensing Angle

*Applicable to warehouse, Basement, Garage, LED lights under the bed , Advertising light boxes, Art murals automatic light, Washroom LED, mirror LED, Wardrobe, Wine cabinets, Automatic faucets...etc



Specification:

Working Voltage: DC6V-24V

Current: 5A

Sensor Method: PIR

Delay Time: 15s(default) to 360s (adjustable)

Cord Length: 0.3M

Detecting Range: 0-7M

Work Lumens: <18 lux

Size: 48*25*14mm

Net Weight: 29g



Product tips

1. Please try to use DC 6V-24V voltage. When using voltage of DC 5V, may affect the stability of the product work

2. When the indoor temperature is close to human body temperature, the sensitivity of the product will decrease

3. With light sensore: Work only in dark light or at night, not during the day; Without light sensore: Support day and night use, if you do not want to use during the day, please turn off the power

5. If your LED strip connect with mini RGB/RGBW(<2A) controller, please adjust its mode to be static color or use controller greater than 4A for your LED Strip, Otherwise it may affect its normal work

• Automatic Induction. The light will be activated ON/OFF by auto PIR motion detection.Application Home or Outdoor monitoring, Automatic lighting, Advertising Lighting, Automatic motors and appliances, etc
• With light Sensor (Use at night or in dark light); Without light sensor (Used by day and night)
• 0 to 7 meters detecting range and high sensitivity
• Easy to install. Widely used on motion-activated lighting, CCTV Carmra , LED strips and others
• Timing setting from 15s to 360s
• Application: Security and Protection,Home and Advertising AutomaticLighting; Human Body Monitoring, Pet (animal) monitoring, Entryway,Kitchen/Cabinet/Pantry/Closet Lighting, and etc...
• Standard 5.5*2.1mm DC Plug Connetor

User questions & answers

Question:	is it water resistant
Answer:	It is not water resistance. There is a hole on the back to adjust the delay for the motion sensor and gaps near where the wires leave the body of the sensor.
Question:	Can you trigger a 12v automobile relay using this sensor
Answer:	Hi, this sensore (with light sensor) can work with relays, some customers are used to connect relay. If you relay using DC 12V (
Question:	Can you use two sensors on one light
Answer:	Hello, so sorry about the delay. I only bought one sensor so I have not tried. In theory you can probably use a "solid state relay" or use an "AND Gate" or a "OR GATE" both connected to the same circuit while keeping the supply voltage at 5.0 volts (perhaps a (5.0 Volt) voltage regulator since it should operate between 6 and 24 volts} to support the gates, plus other logic to get it up to the 6 to 24 volt level. You will have to draw this out and look at it. If you stay in touch I can figure that out down the road. I do plan to buy another one, but I haven't even wired this one up yet. Play thing for me right now while I do grown-up stuff, so I just haven't got to it yet at all. Stay in touch though. Take care...
Question:	will light stay on for as long as there is motion
Answer:	Yes. The sensor is continuously detecting, as long as it detects any movement of people or animals, the sensor will output voltage normally

• ✅【Easy to install】 NO NEUTRAL WIRE REQUIRED - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.
• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.

User questions & answers

Question:	es compatible con lamparas led de 18w
Answer:	Yes it's compatible with LED lights. Thank you for your question, have a nice day.
Question:	will this switch work with fluorescent lighting
Answer:	Hello, this sensor switch can be worked with CFL bulbs up t0 300W. Thank you for your questions. ELEGRP Customer Service

• ✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.
• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.

Product features

ELEGRP LIGHTING CONTROLS

ELEGANT ART

Light up you home in the gentle night.

MULTIPLE SETTING MODES - Features multiple setting modes for different usage scenarios at home

—————————————————————————————————————————————————————————————————————

Set It Into An Occupancy Sensor Switch

OCC Mode: Automatic ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity to “1”, “2” or "3" as desired. DO NOT set the LIGHT to " • ".

—————————————————————————————————————————————————————————————————————

Set It Into A Vacancy Sensor Switch

VAC Mode: Manual ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity fully counterclockwise to " • " to disable automatic ON function.

The device will turn on the loads manually only and turn off the loads automatically when the time delay elapses.

—————————————————————————————————————————————————————————————————————

LARGE COVERAGE

The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.

Tips: Install the sensor switch about 4 feet from the floor to get better experience.

HANDS FREE LIGHT CONTROL

PRODUCT SPECIFICATION

Input Rating: 120 - 277V, 60Hz

Lamp Type: 300W LED, 300W CFL, 600W Incandescent

Switch Type: Single Pole / Two Location Control

Wire Gauge: #14 - #12 AWG

Wiring Type: Terminal cap

Operating Temperature: 32℉ to 104℉ (0℃ to 40℃)

Product Size: 4.17x1.73x1.77" (106x44x45mm)

Remark: Installation Instruction Included

• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.
• ✅【Wiring Method】The black wire of the sensor switch shall be connected to the line (hot wire) and the red wire shall be connected to the load. The green wire is required to connect to the ground wire in the wall box, and the ground wire in the wall box must be effective, other-wise the device will not function.

User questions & answers

Question:	Will a decora cover plate (like for a gfci outlt) fit? i have a standard toggle switch in the same box next to the one where this would go
Answer:	Yes, I have a dual plate that fit the single pole switch and the sensor light switch
Question:	Electrical is old and no ground wire. Box and conduit the wire is in is metal. Will it work if I connect the ground to the metal electrical box
Answer:	Hi, this sensor switch requires to be connected to the ground and the sensor will not function if it's not grounded. If your metal box has already been connected to the ground, this sensor switch could work after you connect the green ground wire to the metal box directly. Please do make sure your metal box is properly grounded. Best Regards, ELEGRP Customer Service
Question:	What type of warranty does this product have
Answer:	Dear customer, ELEGRP offers a 30-day money-back guarantee for new purchases and a lifetime warranty replacement service for this product. Please go to "Your Orders" on Amazon, then click the "Problem with order" or "Get help with order" button and contact us so we can help you to solve the problem with professional technical support or after-sale service. ELEGRP Customer Service
Question:	Can I use two occupancy sensors in a 3 way circuit
Answer:	Hello, this sensor switch only works with single pole and it could not be used in 3-way wiring. Thank you for your question, have a nice day.

Product features

ELEGRP LIGHTING CONTROLS

During installation, to ensure the sensor switch functions well:

1. After wiring it for the first time, please wait 30 seconds for product booting. (Most sensor switches in the market have this feature)
2. Please make sure the product is correctly wired. The black wire of the sensor switch shall be connected to the Hot wire and the red wire shall be connected to the load. Please also make sure the sensor switch is connected to the ground.

The sensor will not function if it's false wired or un-grounded.

Product description

Put home automation into motion with the GE-branded Unfrighten Z-Wave In-Wall Smart Motion Switch. When paired with a compatible hub, the hardwired motion-detecting smart switch operates ceiling lights, wall fixtures and more through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Home Seer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
• SELECTABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub.
• 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 volt
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
• Please refer user guide below for better use

User questions & answers

Question:	Works with smartthings app on samsung note
Answer:	Yes, all of the GE/Enbrighten Z-Wave lighting controls will work with SmartThings on any smart device that supports the SmartThings app.
Question:	Can this device function as a normal, manual switch, but then use the motion feature to trigger other events/automations
Answer:	Yes, however to clarify this and another answer already posted, you must have a hub that supports this functionality. The GE 26931 is utilizing the Z-Wave Multi-Channel Command class to be able to address both the motion and the switch function seperately. At this time, only the Lowes Iris and SmartThings (using a community created device handler) can achieve this. It is necessary for the hubs to allow this command class and functionality before it can be taken advantage of. If you are using the Lowes Iris system, you would need to manually use button presses to put the GE 26931 into Manual mode, and then you can set rules to perform actions when motion is detected. For SmartThings, it would be necessary to locate a community device handler to properly take advantage of setting the functions of the GE 26931. We continue to work with other hub manufacturers, however at this time, those are the only devices we are aware of that can utilize the features we have created to perform as you have requested.
Question:	Is this switch smart enough to not turn on the lights when it is daylight? (i.e. does it have an ambient light sensor
Answer:	Yes, it can judge if it is daytime and respond by not automatically turning on the light. You just have to set it up that way. There are several options available. You just need to hold one of three certain buttons down on the switch to program it the way you want it. You can NOT connect the sensor independently to the HUB though, only the actual switch.
Question:	I want to use motion switches in a 3-way setup on a staircase. Can this switch be paired with another motion sensor
Answer:	Unfortunately at this time we do not have an Add-On Switch with a built in motion sensor, and you cannot use 2 Smart Motion Switches together.

Product features

GE Z-Wave Plus In-Wall Smart Motion Switch

Wirelessly schedule a timed event, create custom scenes and control on/off function from anywhere from your smartphones, tablets, PCs and Z-Wave enabled remotes.

Ultimate Flexibility

Wirelessly schedule a timed event, create custom scenes and control on/off function from anywhere from your smartphones, tablets, PCs and Z-Wave enabled remotes.

3 Operational Modes

Occupancy mode turns on when motion is detected and off automatically. Vacancy mode requires the light to be manually turned on and will turn off automatically when motion is not detected. Manual mode for manual On and Off control of the lights.

Detection Zone

Sensor covers a 180 degree range up to 45 ft. away in order to be effective in small or large rooms.

Requires Neutral Wire

Replaces your current light switch and is easy to install using your home's existing wiring. 'Please ensure your home has a neutral wire before purchasing.