14 best led driver dimmers

Product description

EZDim Product - First LED Driver + In-Wall Dimmer Switch in one unit, Simplifies LED installation by eliminating compatibility issues between driver and dimmer; Fits in a standard recessed electrical box. 100% - 1% SMOOTHING DIMMING - Output voltage is adjustable via sliding lever, main suapply output voltages remain within the regulation limit of +/- 3%; Short circuit, thermal runway, and over voltage protection. Power failure memory - If power is interrupted, EZDim will return to setting prior to interruption; No derating required when ganging units. Input Voltage - 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz), Stand-by Power: ≤0.5W; Input Current: <1.0A @ 120VAC max load. HITLIGHTS QUALITY, UL LISTED, RoHS Certified, CE Certified & MADE IN THE USA and backed by a FIVE year warranty from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

• EZDim Product - First LED Driver + In-Wall Dimmer Switch in one unit, Simplifies LED installation by eliminating compatibility issues between driver and dimmer; Fits in a standard recessed electrical box
• 100% - 1% SMOOTHING DIMMING - Output voltage is adjustable via sliding lever, main suapply output voltages remain within the regulation limit of +/- 3%; Short circuit, thermal runway, and over voltage protection
• Power failure memory - If power is interrupted, EZDim will return to setting prior to interruption; No derating required when ganging units
• Input Voltage - 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz), Stand-by Power: ≤0.5W; Input Current: <1.0A @ 120VAC max load
• HITLIGHTS QUALITY, UL LISTED, RoHS Certified, CE Certified & MADE IN THE USA and backed by a FIVE year warranty from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation

User questions & answers

Question:	Could i connect three outgoing wires to this (each routing to a short led run
Answer:	So this converts 110 v to 12v mainly used for under counter LED light strips...you can connect an entire Kitchen under counter LED light strips to this switch
Question:	Do I have to use low voltage cable? Can I use the existing 12 gauge wire for the output
Answer:	This is not a remote this is a simple 120volt to 12 volt converter with a dimmer, this is not a remote that will allow you to change colors on rgb leds.
Question:	Can this switch control multiple LED lights, 4 or 6 bulbs on a dimmer switch
Answer:	It has a 1kHz square wave generator on the top for probe testing.
Question:	I am not able to select a color. It only gives me the option to select wattage & 12/24volt
Answer:	This unit runs on either internal battery power or the included 110V AC power adapter.

User questions & answers

Question:	Can you put this in a recessed electric box that is shared with another switch and plug-in outlets> Is the inside rectangle the standard size
Answer:	Possibly
Question:	Has anyone trued using this switch/dimmer for candelabra LED's
Answer:	Cheap ugly plastic. I threw it away after the seller quit responding to me to send it back for a refund. I would suggest not buying from this seller.

Product description

CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more; Please use the shortcut "ctrl+F" in the User Guide file included in the Technical Specification of Product information to find the matching dimmer. SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker. BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code; See diagram in images for wiring instructions. CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day. HITLIGHTS QUALITY, ETL-LISTED & MADE IN THE USA and backed by a FIVE year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

• CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more; Please use the shortcut "ctrl+F" in the User Guide file included in the Technical Specification of Product information to find the matching dimmer
• SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker
• BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code; See diagram in images for wiring instructions
• CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day
• HITLIGHTS QUALITY, ETL-LISTED & MADE IN THE USA and backed by a FIVE year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation

User questions & answers

Question:	Is there a limitation on the total lineal footage of patch cable that can be used due to voltage drop
Answer:	Assuming you're planning to use the full 150 watt capacity of the transformer you should use a minimum of #8 wire for that distance. Anything less would have unacceptable voltage loss and pose a possible fire hazard. Ideally you'd want to place the transformer as close as possible to your low voltage load...50ft is quite a long distance to travel with 12 volts.
Question:	I installed a 150 watt driver on only 40 watt load and lutron diva c.l d. dimer sometimes the led strip pulsates.is this the dimer or the load i have
Answer:	It depends on the led strip you are going to use. Some have only 150 LEDs in a 16.4 foot strand, some have 300, 600, or as many as 1200 LEDs in the same length. All of these will have completely different power draw especially with the different types and sizes of LEDs available. You must choose a strand that meets your needs and read their specifications to discover what size driver you need. For example, I just purchased 4 neutral white (4000k) light strips with 300 LEDs per strip to go around my room (50+feet). The specs from the seller tell me that these 12 volt light strips use 24 watts per strip, or a combined total of 96 watts for 4 strips. Make sure you purchase a driver that will not be maxed out on its wattage capacity, try to only utilize around 80% of it's capacity for longevity and heat safety. Purchasing a 100 watt driver would have been a bad choice as I would have utilized nearly all of it's capacity, which will wear it out and the lights prematurely with excessive heat. A 150 watt driver is a better choice to utilize a constant 96 watts of power without generating excessive heat. Also be sure not to connect multiple strips in a series end to end. It is best to wire them all in parallel, meaning each strip should connect directly to the driver with it's own wire and not connected through the strip next to it. For 4 strips I ran 4 wires to each strip directly from the driver. Do not connect strips end to end. Lastly, make sure if you plan to use a dimmer that it will be compatible with your dimmable driver and lights. The lights must be dimmable to start with. Then make sure the driver is dimmable. The magnetic led drivers all require a magnetic low voltage dimmers (MLV), which are not common. They will not work properly with (ELV) electronic low voltage dimmers, which are very common, but can fry the transformer and become a fire hazard. I hope this helps.
Question:	Running 3 led strips in parallel. what's the max length of connecting wire and necessary gauge to connect a strip approx 50ft away from driver
Answer:	You might do that but I would NOT recommend it. Voltage drop would reduce brightness in all three and potentially burn out the switch to boot. If I were facing a project like this in the future I would run line voltage to three regular outlets located at appropriate spacing for the lighting effect I wanted. I would control all three outlets' power through a dimmer. (one switch -> 3 outlets). THEN I would plug in the low voltage transformer that comes with each light kit into their respective outlets. No voltage drop. Bright lights. You can still dim them with one switch. Those low voltage controls are expensive and the transformer needed to drive the lights is really expensive. Stay with line voltage (house current) as far as possible. Line voltage dimmers aren't cheep but much less than all the low voltage controls.
Question:	How many watts are in a foot of LED tape light how do i know how big of a driver i need
Answer:	12 gauge is more than capable of passing low voltage current. The challenge is in joining the wires, ideally by solder, to the Hitlights accessory connectors. You still buy a Hitlights connectors (a) cut off one end and attach by solder to the higher gauge wire and add a gasket/cover (b) clamp the other

Product features

Features

• Output constant voltage
• UL, cUL listed, Class 2, Class P, Type HL*
• Protection:short circuit/over loading/ Over temperature
• PWM output, does not change the color index
• Full protection plastic case, for dry and damp locations
• Compatible with Forward phase, Triac, MLV Dimmers
• Cooling by free air convection
• Suitable for LED lighting and moving sign applications

Magnetic LED Dimmable Driver

• Converts 110V AC to 24V DC
• Smooth and Reliable Dimming from 0 to 100% with no flicker
• Wattage Choice: 40W, 60W, 100W, 150W, 300W
• Voltage Choice: 24V

Switchex - First LED Driver + In-Wall Dimmer Switch in one unit

Working Advantage: combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit

compatible with most solid color 12V and 24VDC tape lights and fixtures.

Wattage Choice: 40W(12V), 60W(12V or 24V), 100W(24V)

Electric LED Driver

• Converts 110V AC to 12V DC and works
• Smooth and reliable dimming from 0 to 100% with no flicker
• Wattage Choice: 24W

UL Power Adapter

• Output: 8 Amps, 110V AC - 12V DC Transformer
• UL Listed: E362417, By HIT International Consulting LLC, 2018
• Wattage Choice: 24W, 60W, 96W

Low Voltage Transformer

• Input: 120V AC @ Full Load
• Output: 12V Or 24V DC
• Coil Former: Double Section Bobbin

Safety Transformer for Project

• Circuit Breaker: Primary and secondary auto-reset
• UL Certificate: E465183, By Magnitude Lighting Converters, 2018

Wall Dimmer Switchex

Compatible dimmer switches from Lutron, Leviton and more, Please use 'ctrl+F' in the product description to find the matching model.

HitLights Drive Your Lights

24 Hours US based support and Answer questions within 6 Hours.

Product description

Q & A:

Q1: Why your price is low, but quality is great?

A1: Because we are factory outlets, our Sales stratery is small profits but quick turnover.



Q2: Why some customers said your dimmable transformer has buzz noise?

A2: Reason1, It was old version, we have upgrated new version and it is quiet operation now.

Reason2, some Special Wall dimmers are not compatible.



The upgraded design is Smaller, Quiet, has Greater operating efficency, has over-current protection, and eliminates problems with buzzing and overheating.



This is an excellent quality 4.15A 50W Triac dimmable power supply.

Compatible with most AC wall dimmer including Lutron, Leviton and most other household dimmers.

Can be used for many LED lights and other applications.

Requires no minimum load and it is very quite without any buzz or humming noise.

Warning: Do not overload. Overload will cause the AC adapter to fail. We are not responsible for misuse of power supply.

It is recommended not to exceed the AC power supply's capacity. Please calculate your load before connecting the power.



Specification:

Output Current: 4.15A Output Voltage: 12V

Input Voltage: 100V-130V 50/60HZ

Size dimension:

NON-waterproof use for indoor dry location only.

• Quiet, Smooth, Full range flicker-free dimming for 12 volt LED Lighting such as LED strips, modules, light bars, puck and other LED accent lights
• Converts 110V AC to 12V DC while remaining compatible with standard TRIAC wall dimmers (including Lutron, Leviton, and most other standard household wall dimmers). Compatible with forward and reverse phase dimmers.
• Easy to install, mount, and wire. Included AC and DC cords can be removed for use in hard wire installations.
• Comes with 4.5 foot AC cord and 3.5 foot DC cord (both are detachable). DC cord has 5.5x2.1mm DC connector for use with most LED strip lights.
• Compatible with 12v LED Strip light, LED puck light, module light or many other 12v LED lights

User questions & answers

Question:	how many 12 volt light can this run at 45 watts
Answer:	the size is 190x65x29mm
Question:	Is there a ul or etl listing
Answer:	If this is a 2 wire Insteon dimmer, it may not work correctly with any led driver power supply. You need a 3 wire Insteon dimmer that uses a neutral wire. Having said that, the Insteon dimmer is a paddle switch, that when tapped will go to a predetermined brightness. If you hold it either up or down it should dim smoothly. If you just tap it, it can give the impression of High, Medium and off. I have used several of these transformers with Insteon dimmers and they work very well.
Question:	what are the dimensions of the driver
Answer:	With the manufacturer we use, GM led tape we are limited to 32 feet per run but you can do parallel runs as long as you don't exceed the driver wattage
Question:	I have the pluspoe 20 xfmr with 6' of a 16' 24w led strip and an insteon dimmer. the leds don't dim, just hi, med, off. is the xfmr the reason
Answer:	It’s usually your dimmer if you turn it down to a low light level.

Product description

The Armacost Lighting 20 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 20-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 20W, 12V Power Supply, 1) Detachable AC Power Cord

• LED Lights provides smooth, full range, flicker-free dimming. Free of "pop-on" or "pop-off"
• Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls
• Connect up to 100% of the rated 20-watt maximum load – derating performance is not required
• Class 2 power supply features overload protection, automatic shut-off
• For optimal AC dimming performance, use a forward phase CL-style or equivalent dimmer. The use of reverse phase or ELV may degrade dimming performance
• No minimum power load; dimming works equally well whether powering a single 3-watt LED puck light or 20 watts of tape lighting, or a combination of both
• ETL listed for dry or wet location use
• Dimensions: 5-3/16 in. L x 1-3/4 in. W x 3/4 in

User questions & answers

Question:	is there a sizing table to tell me what size driver I need for a lenght of lights
Answer:	Our AC Dimmable power supplies are compatible with virtually any dimmer on the market that is listed for LED use; including the Lutron Maestro Series. We recommend using a "CL" dimmer as the trim adjustment setting helps with controlling the dimming range. These dimmers will typically have the letters "CL" in the model number.
Question:	Can you notice a noise (hummm) when you dim the led to low light
Answer:	Thank you for your interest in our products. The 24 and 45 watt universal power supplies no longer come with an AC cord. If dimming with an AC wall dimmer switch you need hard wire the power supply in the circuit rather than plugging it in. This is due to National Electric Codes stating it is a fire hazard to do so. If you are not dimming you will want to use one of our standard power power supplies such as our 8,20,and 60 watts.
Question:	Will this work with a Lutron Maestro Dimmer
Answer:	First you should know what the watts of each 12v light, then you make sure total watts don't exceed 50watt of this model ( it upgraded to 12v 50watt).
Question:	Does the armacost 45-watt driver include ac cord? the amazon listing says "...not included" but box shown in product photos says it is included
Answer:	ETL I believe

Product features

Install via plug in or direct wire

Plug into any traditional outlet or direct wire the homes 120-Volt AC Romex into the designated terminal block

AC in-wall dimming

Dimming LED Drivers are compatible with virtually every AC in-wall dimmer, from simple incandescent CL dimmers to Alexa-enabled, Wi-Fi smart dimmers

Outdoor Options

Outdoor transformers are designed with landscape lighting in mind; featuring larger wattage capacities and a rugged, weather-proof frame

100% Dimming Range / No Minimum Load

No minimum lighting load required for wide range dimming. Connect up to 100% of the model’s rated capacity

Built-in fault protection

Safety features include automatic shut-off in case of overload or other fault. The unit will automatically restart after the fault is corrected.

Class II power supply

Class II transformer: Conforms to UL Std. 1310

Accessories

Optional transformer enclosures offer additional protection for in-wall installations or small scale outdoor projects

Product description

Armacost Lighting’s 0-60 watt dimmable electronic power Supply works equally well whether powering a 3 watt LED puck light or 60 watts of tape lighting, or a combination of both. No minimum power load is required for effective, flicker-free dimming. Connect up to 100% of the rated 60 watt maximum load, derating the performance is not required

• Power your LED Lights. Delivers highly efficient, stabilized 12V DC power. No minimum load required, optimized for low Voltage Lighting, 0-60 watts max
• Fully dimmable, designed to work best with elv reverse phase dimmers, including all Lutron and Leviton elv dimmer models
• Hardwire connected, includes NEMA UL approved enclosure and comes prepackaged with wire nuts and mounting screws
• Conforms to UL standard 2108. Certified to Canada/CSA standard C22.2 no. 250.0-08, 3Rd edition
• Automatic shut-off in case of Lighting overload, open circuit, short circuit, over temperature or other fault. Power Supply will automatically restart after the fault has been corrected

Product features

Install via plug in or direct wire

Plug into any traditional outlet or direct wire the homes 120-Volt AC Romex into the designated terminal block

AC in-wall dimming

Dimming LED Drivers are compatible with virtually every AC in-wall dimmer, from simple incandescent CL dimmers to Alexa-enabled, Wi-Fi smart dimmers

Outdoor Options

Outdoor transformers are designed with landscape lighting in mind; featuring larger wattage capacities and a rugged, weather-proof frame

100% Dimming Range / No Minimum Load

No minimum lighting load required for wide range dimming. Connect up to 100% of the model’s rated capacity

Built-in fault protection

Safety features include automatic shut-off in case of overload or other fault. The unit will automatically restart after the fault is corrected.

Class II power supply

Class II transformer: Conforms to UL Std. 1310

Accessories

Optional transformer enclosures offer additional protection for in-wall installations or small scale outdoor projects

Product description

Product Description

Our Dimmable Drivers offer an elegant control and dimming solution for any of your LED light strip projects. These 40 to 300 Watt Dimmable Drivers allow you to control the brightness

of your LED light strips with a dimmer switch mounted in your wall - a more elegant and permanent solution than a dial dimmer or remote unit. Additionally, the wide range of compatible wall dimmers means that

you get to choose the wall dimmer that best suits your home, office, or other building. These drivers are manufactured to our exacting technical specifications here in the United States, meaning that we are able to offer an unsurpassed

five year customer r service on these units. Our range of Dimmable Drivers are the ultimate solution in any of your LED lighting projects and are compatible with most Lutron and Leviton dimmer switches.



Product Features :

Control the brightness of your LED light strips with a wall dimmer

Compatible with all 24V LED light strips

ETL-Listed

Made in USA



Installation instructions :

Driver input : Green (Ground), Black (Live), White (Neutral)

Driver output : Red (Positive), Blue (Negative)



Specifications

Input : 120V AC

Output : 24V DC, 300 Watts (12.5 Amps)

Dimensions : 89 x 249 x 107mm (3-1/2 x 9-7/8 x 4-3/16 inches)

Compatible Lutron dimmers include Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T and Skylark

Compatible Leviton dimmers include Mural, SureSlide, ToggleTouch and Vizia

Part Number : PWR-24V-300-30-D

• CONVERTS 110V AC to 24V DC and works with LED compatible dimmer switches from Lutron, Leviton and more.Please use the shortcut "ctrl+F" in the User Guide file included in the Technical Specification of Product information to find the matching dimmer.
• SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker.
• BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code. See diagram in images for wiring instructions.
• CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day.
• HITLIGHTS QUALITY, ETL-LISTED & MADE IN THE USA and backed by a FIVE year from HitLights for peace of mind. Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

User questions & answers

Question:	Is this safe to power LED strips (2 * 24 volt, 120 watts) mounted in ceiling
Answer:	I am using these on LED MR16 bulbs, one per bulb due to them being in recessed light fixtures, and a Levitron LED dimmer, there is no noise or flickering when dimming.

Product features

Features

• Output constant voltage
• UL, cUL listed, Class 2, Class P, Type HL*
• Protection:short circuit/over loading/ Over temperature
• PWM output, does not change the color index
• Full protection plastic case, for dry and damp locations
• Compatible with Forward phase, Triac, MLV Dimmers
• Cooling by free air convection
• Suitable for LED lighting and moving sign applications

Magnetic LED Dimmable Driver

• Converts 110V AC to 24V DC
• Smooth and Reliable Dimming from 0 to 100% with no flicker
• Wattage Choice: 40W, 60W, 100W, 150W, 300W
• Voltage Choice: 24V

Switchex - First LED Driver + In-Wall Dimmer Switch in one unit

Working Advantage: combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit

compatible with most solid color 12V and 24VDC tape lights and fixtures.

Wattage Choice: 40W(12V), 60W(12V or 24V), 100W(24V)

Electric LED Driver

• Converts 110V AC to 12V DC and works
• Smooth and reliable dimming from 0 to 100% with no flicker
• Wattage Choice: 24W

UL Power Adapter

• Output: 8 Amps, 110V AC - 12V DC Transformer
• UL Listed: E362417, By HIT International Consulting LLC, 2018
• Wattage Choice: 24W, 60W, 96W

Low Voltage Transformer

• Input: 120V AC @ Full Load
• Output: 12V Or 24V DC
• Coil Former: Double Section Bobbin

Safety Transformer for Project

• Circuit Breaker: Primary and secondary auto-reset
• UL Certificate: E465183, By Magnitude Lighting Converters, 2018

Wall Dimmer Switchex

Compatible dimmer switches from Lutron, Leviton and more, Please use 'ctrl+F' in the product description to find the matching model.

HitLights Drive Your Lights

24 Hours US based support and Answer questions within 6 Hours.

Product description

CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more. SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker. SCREW TERMINAL CONNECTIONS for easy installation to electrical code; See diagram in images for wiring instructions. CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day. HITLIGHTS QUALITY, ETL-LISTED and backed by a two year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

• CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more
• SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker
• SCREW TERMINAL CONNECTIONS for easy installation to electrical code; See diagram in images for wiring instructions
• CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day
• HITLIGHTS QUALITY, ETL-LISTED and backed by a two year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation

User questions & answers

Question:	Will this work with a 4 pin led or 2 pin because i only see 2 wires coming out
Answer:	The schematic above shows where the ground wire goes.
Question:	Where can you buy the little adaptor shown in the picture so it can plug into the led strip
Answer:	Not installed yet, but this is 4th LED install I have made. Been satisfied with Hitlights products. The 100 W driver connected to 2 high density LED lights, 888 W total.
Question:	Where is the terminal for the ground wire
Answer:	Safe? They do get a little warm to the touch, mine are in the open air of the roof trusses in my shop and get dusty, but no problems so far. These certainly outlast the originally supplied transformers with my LED system. 95% failure rate with the original power supplies--NO FAILURES WITH THESE DEVICES, but they are pricey.
Question:	Worth buying
Answer:	You need to know the wattage of your lights. The volts the driver puts out times the amps of the driver tells you how many watts it will power. For example if the driver is 12 v. and 2 amp. it could power 24 watts. Although you shouldn't take right to 100% capacity so about 20 watts.

Product features

Wall Dimmer Switchex

Compatible Lutron dimmers include Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T and Skylark

Please use the shortcut: 'CTRL+F' to find the matching dimmer in the:

Technical Specification - 'User Guide'.

Safety Transformer for Project

Protection:short circuit/over loading/ Over temperature

Full protection plastic case, for dry and damp locations

Low Voltage Transformer

HitLights currently sells only 4 models of this type.

Control the brightness of your LED light strips with a wall dimmer Compatible with all 12V LED light strips

Product description

CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more; Please use the shortcut "ctrl+F" in the User Guide file included in the Technical Specification of Product information to find the matching dimmer. SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker. BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code; See diagram in images for wiring instructions. CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day. HITLIGHTS QUALITY - MADE IN THE USA and backed by a FIVE year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation.

• CONVERTS 110V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more; Please use the shortcut "ctrl+F" in the User Guide file included in the Technical Specification of Product information to find the matching dimmer
• SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker
• BARE WIRE CONNECTIONS AND KNOCKOUTS for easy installation to electrical code; See diagram in images for wiring instructions
• CHOOSE AN APPROPRIATE LIGHT LEVEL for any room, any mood, or any time of day
• HITLIGHTS QUALITY - MADE IN THE USA and backed by a FIVE year from HitLights for peace of mind; Contact our US-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation

User questions & answers

Question:	How many watts of dimming driver is suitable for this light bar
Answer:	Its a magnetic transformer so the heat should not bother it. But never go over 80% of the transformer rating. if its in a attic i would stay around 70% just to play it safe
Question:	Is this compatible with my Insteon Dimmer
Answer:	I didn't shoot it with an IR gun...but it does get warm and it was only pulling 1.2a DC with my fluke multi meter.
Question:	Has anyone installed this in the attic? If you did, would you advise not to or would you do it again
Answer:	2-pin only. RGB, RGBW, and CW-WW tuneables won't work as designed on a 2-pin setup. I would suggest a different product if you already own the 4-pin LEDs.
Question:	What is the max operating temperature of this power supply
Answer:	itLights 3.8 out of 5 stars 79 Reviews Solderless LED Light Strip Connector Extension for 10mm (5050) Strip, Single Color - 6 Foot Strip to Strip Any Angle Connector - for LED Strip Light & Tape Light in Kitchens, Cabinets, Shelving & More

Product features

Features

• Output constant voltage
• UL, cUL listed, Class 2, Class P, Type HL*
• Protection:short circuit/over loading/ Over temperature
• PWM output, does not change the color index
• Full protection plastic case, for dry and damp locations
• Compatible with Forward phase, Triac, MLV Dimmers
• Cooling by free air convection
• Suitable for LED lighting and moving sign applications

Magnetic LED Dimmable Driver

• Converts 110V AC to 24V DC
• Smooth and Reliable Dimming from 0 to 100% with no flicker
• Wattage Choice: 40W, 60W, 100W, 150W, 300W
• Voltage Choice: 24V

Switchex - First LED Driver + In-Wall Dimmer Switch in one unit

Working Advantage: combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit

compatible with most solid color 12V and 24VDC tape lights and fixtures.

Wattage Choice: 40W(12V), 60W(12V or 24V), 100W(24V)

Electric LED Driver

• Converts 110V AC to 12V DC and works
• Smooth and reliable dimming from 0 to 100% with no flicker
• Wattage Choice: 24W

UL Power Adapter

• Output: 8 Amps, 110V AC - 12V DC Transformer
• UL Listed: E362417, By HIT International Consulting LLC, 2018
• Wattage Choice: 24W, 60W, 96W

Low Voltage Transformer

• Input: 120V AC @ Full Load
• Output: 12V Or 24V DC
• Coil Former: Double Section Bobbin

Safety Transformer for Project

• Circuit Breaker: Primary and secondary auto-reset
• UL Certificate: E465183, By Magnitude Lighting Converters, 2018

Wall Dimmer Switchex

Compatible dimmer switches from Lutron, Leviton and more, Please use 'ctrl+F' in the product description to find the matching model.

HitLights Drive Your Lights

24 Hours US based support and Answer questions within 6 Hours.

Product description

Magnitude - LED Dimmer - 12V , 200W Magnetic Dimmable - Inspired LED Transformer M200L12DC-AR

• Inspired LED Driver Dimmable Transformer

User questions & answers

Question:	does the dimmer get wired in on the supply side of this unit or after it (the LED side
Answer:	I can't imagine there is a minimum load. FYI: this has worked so well for several years, that I forgot it was even in the circuit!
Question:	w device hums and power cycles about every 6 seconds of started on full brightness. If started low and increased no hum and stays on? Confused
Answer:	Yes it does. However I should mention that its an expensive transformer to be used for switching loads. Its meant for dimming and thats why it’s priced accordingly. Seems like a waste of money to use it for that application
Question:	Is there a minimum load on the 12V side (I was only going to have 12-15 watt load
Answer:	Greetings, As this dimmable driver is 100 Watts and 12 volts, you will want to ensure that the light bar you use does not exceed a total of 80 Watts at 12 volts. This is because this dimmable driver works optimally between 50% to 80%. For more info, please contact us at [email protected] Thank you, HitLights Customer Service
Question:	Does the power come on instantly if switched on the ac side ? Looking to replace my kitchen light high voltage transformer
Answer:	Read the specs for your particular model of Insteon dimmer.. This is a magnetic driver which is suitable for line voltage dimming of LED lights

• good for 12V LED strip lights, phase-cut TRIAC 0-10V 1-10V potentiometer 10V PWM dimming.
• dry, damp and wet location application, UL cUL listed, class 2, type HL rated, FCC certified.
• universal input, 100V-277V AC, 12V DC PWM output, LED color is consistent throughout dimming.
• with short circuit, overloading and over-temperature protection, grounding on driver and metal case.
• 5-year warranty from order delivered, failure to use this LED driver for its intended purpose or improper installation will void warranty.

User questions & answers

Question:	Can this unit be mounted to an exterior wall in Florida sun if derated for temperature and exposed to rain
Answer:	Yes, I assume that your wall dimmer switch is TRIAC dimmer switch.
Question:	Does this driver have knockouts in the back in addition to the ones i can see on the sides and bottom
Answer:	Yes, work with 12v led tape lights.
Question:	Does it work with wall dimmer switches
Answer:	Supply side of xfmr is controlled by the dimmer switch. The dimmer switch chops the 120 volt sine wave. The led load(s) is connected to the 12 volt output of the xfmr.
Question:	Will this work with led tape lights
Answer:	It could be the dimmer type that you are using. That also often happens when non dimmable bulbs are tried to be dimmed

Product features

Phase/TRIAC Dimmer Compatability List

* Following are only the list of phase/TRIAC dimmer models tested in our lab, for your reference.

* The compatible Phase/TRIAC dimmers with this LED driver are not limited to this list.

Lutron: SCL-153PR-WH / DVCL-153PR-WH / DVWCL-153PH-LA / CTCL-153PDH-LA / TGCL-153PR-WH / TGCL-153PH-WH / MACL-153MH-LA / MIR-600M / CT-600PR-IV / CT-600PR-WH / CT-103PR-WH / DV-600PR-BL / DV-600PR-WH / TG-600PR-LA / TG-600PR-IV / TG-600PR-WH / TG-10PR-WH / S-600PR-WH / MRF2-6ND-120-AL / MRF2-6CL-GR / DZ6HD / PD-6WCL / SELV-300P / MSCELV-600M / MEF2-6ELV-120 / NTLV-600-277-WH / ST-12P-277 / NTF-10-277

Leviton: VPI06-1LZ / TTI06-1LZ / IPL06 / DZ6HD / 6674 / 6672 / TBL03 / 6602 / 6683

• TRIAC DIMMABLE- Converts 120VAC to 12VDC for LED strip light, connect the triac dimmer switch at AC line, dimming the light brightness from 1%-100%, work with standard wall dimmer.
• SAFE LED DRIVER- high safety product, work with 12V LED light only, such as: LED Strip light, cabinet light, Puck Lights, Rigid Strip Light etc.
• NEW TECHNOLOGY- Compatible with TRIAC dimmer on the market with forward phase dimmer, Triac Dimmer, check the recommend dimmer list for the dimmer brand and model.
• GREAT DESIGN- The product fully potted for waterproof, suitable for the wet or dry location, full circuit protection: OVP, OCP, OTP, Surge protection, safe to run your product, for home or commercial use.
• No Flicker Design, good for eye protection, excellent for bedroom, kitchen, reading room, office etc

User questions & answers

Question:	Will it work with these dimmers from amazon?: https://www.amazon.com/gp/product/b07j5b3r5l/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=utf8&psc
Answer:	I think the MR16 can not dimmable by the 120V dimmer switch, This dimmable LED driver is mainly use for LED strip light, cabinet light, LED module, Thanks
Question:	What is the ul (backwards ru) number? it's very blurry on the photos. (important to show clearly so it it can be checked against ul database
Answer:	Dear Arnaldo, Thank you inquiry our dimmable LED power supply IP67 for wet or dry location, This LED driver was designed to dimming the 12V DC LED lights, such as LED Strip lights / LED Rope light / LED Tape light, LED Cabinet light, LED rigid light bar etc, Can not work with 12AC/DC MR16 LED Spotlight, because the spotlight has built in a custant current LED driver, all dimmable LED driver can only work with the LED light that do not built in a LED driver, Best Regards | Sophia | Enersystec Electric Co.,ltd
Question:	Why can't this dim more than 1/2 way? using dvelv-300p dimmer. tried both pillips and torkase led mr16 bulbs
Answer:	It says it is rated for "dry, damp, wet." So it has a seal on the covers, including the "connections" cover. But you will knock one or two rings to insert/exit your wires. You would need to waterproof these connections, and make sure the holes you open points down for the rain. It is black in color (sun). You have no other solutions? Eaves? a cover over the transformer? inside? How about a full box you install inside but opened at the bottom only. Just do not place in an enclosure that is tight closed as it needs to dissipate heat.
Question:	Will it work with 12vac and or 12vdc mr 16 dimmable lights
Answer:	no knockouts in the back.

Product features

Professional Dimmable LED Driver for Residential or Commercial Project

Latest Dimming solution, Dimming the light brightness from 1-100%,

Smooth dimming, no flicker,

Better dimming experience with this small LED driver,

Recommend Dimmer

Triac Dimmer Switch:

DIVA DV-603

DIVA DVCL-153P

SKYLARK S-300P

SKYLARK SELV-300P-AL

DIVA DVELV-300P-AL

This dimmable LED Driver is also compatible with other brands dimmer switch.

IP67 Waterproof LED Driver

The LED driver potted with glue for waterproof,

Do not worry about the moisture will damage the LED driver,

Suitable to be installed at wet or dry locations, such as Kitchen, bathroom, under the roof, etc,

But this LED driver Can Not be installed under-water or directly under-rain, for outdoor use which should be installed in the electric box.

Product description

Kichler 4DD12V040WH 12V-40W LED Driver & Dimmer, White

• Finish: White
• Lamp Type: LED
• Material: Aluminum

User questions & answers

Question:	How many feet of lights can this operate
Answer:	This 12 Volt 24 watt LED driver is dimmable, If you use it for those 12V smart controller, the LED Driver dimming function will not working, So you can not connect the dimmer switch at input of LED driver, Thanks,
Question:	To install under cabinet lighting, do we need only the tape and the driver/dimmer, or any other supplies? Anything else
Answer:	Dear Customer, Thank you inquiry our Dimmable LED driver IP67 Waterproof, dimmable by dimmer switch for LED Strip Light,the backward RU number is E345001, you can verify on the uldatabase, if you do not know how to check it, you can contact us by contact seller, I hope this will helps you,

Product description

Package include

1 piece of switch



Specification :

Input Voltage(Max.):10V DC

Input Voltage(Min.):0.5V DC

Output Control Current(Max.): 40mA

Working Temperature:-10℃-40℃ ambient operating at full load

Working humidity: 20%-90% RH non-condensing

Storage temperature, humidity: -20℃-80℃, 10%-90% RH

Dimension: 32*20*35.5mm

• The dimmer is small and easy to install,Switch Size: 34*22*15（mm）,Mounting Hole Diameter :φ7mm
• The connected power 0/1-10V interface must have a voltage of 10V for dimming,Adjustment range: 1-100%
• The max load connected to the drive is 10V/40mA.
• Designed for 0/1-10V regulating and compatible all 0/1-10V interface dimmable electronic LED Driver & ballasts & transformers and power dimmers .
• Place the driver away from direct heat sources and in well-aired spaces .If the driver is built-in ,sufficient ventilation must be ensured.

User questions & answers

Question:	How do you connect this your grow lights ? I see no instructions
Answer:	Yes.
Question:	How many lights can be connected to one dimmer switch if daisy chained.Im using 600 watt lights with meanwell drivers
Answer:	I don't think so. This dimmer is for 110v/240v LED lights that have a separate 0-10v dimmer circuit. It's specifically made to drive a PWM circuit built into the light.
Question:	Does anyone have experience with connecting this to a meanwell driver
Answer:	Depends on the light strip wattage. Determine the type of led tape you want first. Look at the color (Kelvin, brightness) The manufacturer will give you watts per foot. Then you can determine if this combo driver/dimmer will work.
Question:	I am trying to be able to dim an led that is powered by a 3.7 v lithium ion battery. if i put this in line between the battery and led will it dim
Answer:	Depending on the configuration of you cabinets you may need some tape connectors/splices. Example: where a cabinet is above a sink and the cabinets on the sides are lower. I used the connectors to go from the lower cabinets up to the higher cabinet so I didn’t have tape lights going vertical. I also install my tape on painted underside of cabinets, so I have had no problem with tape coming loose.