13 best led dimmer flickers

Product description

Large Slider: Will Work with LED Dimmer switch with Memory. On/ Off switch with Dimmer Three wire hook up Operating voltage 9V DC - 16V DC. 10 Amp Max. Easy mounting with hidden screw holes. Plate size 2-7/8" high x 3" wide, Front of cover plate extends 3/8" out from wall min. hole cut out size 1-3/4" h x 2-1/4" w Other Styles: Cover snaps over switch base plate for a clean look and easy installation and service -Includes 1 switch base and cover with on-off switch's with slider on side(as shown) -Overall Size: 1-7/8" wide x 2- 7/8" tall x 3/8" Deep -Minimum hole cut out size 1-1/2" tall x 1-1/8" wide -Commonly used for lights, pumps, fans, vents and many other uses in RVs, Buses, Horse Trailer Conversions, Haulers, Travel Trailers, Boats and more.

• 12 Volt Dimmer Switch Is Available in Turn, Slider, and Large Slider Styles
• 12 Volt DC Dimmer. Dims up to 60 watts (4.2 amps) of incandescent, halogen, or LED lighting reducing heat and power drain on batteries
• Commonly used for lights in RVs, Buses, Horse Trailer Conversions, Haulers, Travel Trailers, Boats and anywhere 12 volt DC power is present. Fits in small spaces.
• Available in Black, White, Almond, and Brown
• Engineered and manufactured in the USA

User questions & answers

Question:	Does the ground have to be used? I am working with a ungrounded led circuit in a custom cabinet; and am looking for a low profile dimmer switch
Answer:	Yes it works just fine. All you need is a second switch that is SPDT and you wire the 'pole' sourcing from your + and the two 'pole' locations feed one to the dimmers red and the other to the 3way sw 1/p terminal. American Tech makes one - model AH-SWI-02-x where the X is 5 for black and 1 for white. wiring diagrams is at this link on the manufactures web site. https://www.atcomp.com/wp-content/uploads/2018/08/12V-3WAY-DIM.pdf Hope that helps folks
Question:	Is this a PVM dimmer
Answer:	A) If you have an existing switch: The two wires on the old switch are not really positive and negative. One is +12 volt power from the battery, and the other is going to the light. If you look inside the wall, you will likely find that each of the two coloured wires is paired with a white wire and those two white wires are connected together. Those white wires are the negative, and the place to connect the negative (neutral) wire from the new dimmer switch. After disconnecting the old switch, use a volt meter or a test light to determine which of the coloured wires is live - that will be the one coming from the battery. Connect that to the +12 volt side of the new dimmer. Connect the other coloured wire to the load side of the dimmer. B) If there is no existing switch, just a light: Disconnect the positive wire from the light and connect it to the +12v wire of the dimmer. Connect the negative wire of the dimmer to the existing negative wires of the light. Connect the load wire of the dimmer to the open positive wire of the light.
Question:	My dimmer has a "3-way sw i/p" on the back... what is it & how do i wire it? does it bypass the on/off switch allowing dimming of the 3way input
Answer:	No se a que se refiere con certificado de calibración. El aparato funciona bien. Sus lecturas son consistentes.
Question:	My light has negative and positive wire only. This light dimmer has a neutral though. How would i wire my light? Thx in advance
Answer:	Hello Robert, the version (uni-t $ 34.99) sells UNI-T directly ... Signstek is not a version is the name of the seller.The Uni-t Ut139C is an excellent diagnostic tool I recommend it.Thanks for asking.

• SMARTER DIMMING: Control your lights and adjust brightness remotely through Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control only available with Alexa-compatible Z-Wave hub (will NOT work directly with a smart speaker or voice assistant).
• SIMPLE DIRECT 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire the other boxes. Just put Zooz in the box with power and neutral wires. Connection to power and NEUTRAL required (check your boxes before buying).
• FASTER INSTALLATION: It takes half the time to install Zooz S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on Zooz website) and if you need custom instructions, they'll create them for you! IMPORTANT: Make sure ALL boxes match the wiring diagrams in the manual before installing the switch.
• BONUS FEATURES: Double tap to go to full brightness (single tap to last brightness level). Z-Wave Plus signal repeater, adjustable LED indicator (now straight from the switch paddle), instant status updates, adjustable ramp rate (if you have access to advanced features from your hub), and status recovery after power failure. Scene control added for VER. 2.0 or higher (selected hubs only).
• EXTRA SECURITY: Equipped with the new S2 security protocol. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetime tech support.

User questions & answers

Question:	which cover plate works with the Zen
Answer:	It is a single switch, it can be used to replace any dimmer switch (using a neutral wire). If you mean can it be used on a circuit with only one switch, yes it can.
Question:	What does it mean by "adjustable led indicator (now straight from the switch paddle)". does the switch have any led indicators
Answer:	The switch that came across with this question is a "Dimmer" switch. Do not use a dimmer switch for this application. To answer your question - yes you can use a smart switch to control a fan, but as i just mentioned, not this particular one. I have quite a few in my buildings that control everything from exhaust fans to damper motors as well as lighting and they work fine. My suggestion to control a bathroom fan would be https://www.amazon.com/GE-Repeater-Extender-SmartThings-14291/dp/B06XTKQTTV/ref=sr_1_12?keywords=smart%2Bswitch&qid=1566440598&s=gateway&sr=8-12&th=1 The GE Enbrighten Smart Fan switch. Designed for your application. Using the Zooz switch may work at first, but it will soon fail as the impedance feedback from the fan motor will burn it out. The Zooz is a fine product, but match the product to the application.
Question:	Can I use this switch on a single switch
Answer:	Your question could mean a couple different things. People often tie the "negative" or "return" black wire to ground, although that is generally bad practice. For sure you have to use the return wire or you otherwise don't have a circuit. Chances are high this does not have an independent ground built in, which is why we'll be seeing a lot more fires in the future.
Question:	Can this be used to control on/off of a bathroom exhaust fan
Answer:	this is a PWM dimmer. work's great for led's

Product features

PERFECT FOR SMART BULBS

If you've ever tried connecting a regular dimmer to your smart bulbs, you've learned the hard way that Hue or Sylvania bulbs can't be dimmed like regular lights. And if you ever turn the lights off from the switch, your smart bulbs become unusable until you manually restore power to them. We thought of that when adding remote control to the Zooz switches.

You'll be able to turn the lights on or off AND dim them straight from the wall switch without cutting power to the bulb! Just disable manual control by tapping the paddle 10 times quickly and program simple automations between the switch and your bulbs. You'll need both the bulbs and the dimmer to be added to your smart hub first. Get in touch for step-by-step instructions and wiring tips.

PATENTED 3-WAY / 4-WAY SOLUTION

This dimmer works in>Connect this dimmer with regular on/off switches (don't use other dimmers or smart switches) in multi-switch installations.

Automate your multi-point control setups without rewiring the other boxes. Simply add Zooz to the box with direct connection to the breaker (line) and neutral. For even more flexibility, use it in 4-ways and 5-ways where load and line are separated.

VIRTUAL 3-WAY: You can also program 2 Zooz smart switches to control the same light without traveler wires. Just connect one of them to control the light directly and power the second switch with line and neutral. Then link the switches using smart rules in your Z-Wave hub.

Based on Your Ideas and Feedback

Our ambition is to deliver the perfect product for your smart home needs. That's why our US-based team studies user feedback and welcomes your suggestions every day of the year.

Here is how YOU help us create Zooz devices:

• We take note of each customer inquiry and work closely with product developers to bring new, unique devices to market quickly.
• All of your suggestions and complaints are collected and analyzed to improve future and existing models.
• We update our devices frequently with the latest technology standards and features you requested.

Let's Build Smarter Z-Wave Together!

Why You Need a Hub

There's no way to program and manage a reliable smart home without a hub today. Your WiFi router can only handle a handful of devices so you'll quickly experience delays and outages. Hubs bring all of your products together, whether they're WiFi, Bluetooth, Z-Wave, or ZigBee, and connect them so you can build a truly intelligent ecosystem.

The S2 Dimmer Switch works great with most Z-Wave systems. Here are the most popular: Fibaro Home Center Lite, HomeSeer, Home Assistant, Hubitat, Samsung SmartThings Hub (Custom device handler is needed for advanced settings - go to Zooz site for instructions), Vera, Wink.

Will it work with Alexa? Echo or Echo Plus are not Z-Wave controllers so you will need a compatible Z-Wave hub to control the dimmer with Alexa.

Alexa-compatible Z-Wave hubs include Fibaro Home Center Lite, Hubitat, SmartThings, Wink, and Vera.

Enter the High-Speed Smart Home

Here is what makes Z-Wave the best wireless technology for a connected home:

• IT'S FAST: signal travels through the least crowded radio frequencies for constant connectivity and less interference.
• IT'S PRIVATE: you can run a Z-Wave network 100% locally, without cloud or third party servers involved.
• IT'S RELIABLE: mesh network structure allows the hub to reach devices through other connected products, reducing signal issues.
• IT'S SECURE: with the latest S2 security standard, Z-Wave is virtually unhackable. Companies like ADT Pulse, Ring, Samsung, August, or GE have been using Z-Wave in their systems for years.
• IT'S COMPATIBLE: choose from thousands of Z-Wave products for unmatched freedom and flexibility when building your smart home network.
• IT'S CERTIFIED: all Z-Wave Plus devices are tested by the Z-Wave Alliance, letting you mix and match products from different manufacturers and brands.

Product description

Please note: When the power frequency is the same as the dimmer frequency,

resonance will occur. The resonance phenomenon will make the dimmer emit a

slight noise. This phenomenon is difficult to avoid. It is recommended to replace

the power supply to eliminate resonance to eliminate noise.



Led Dimmer Features:

● 12V/24V DC 30A LED PWM Dimmer.

● Uses high quality MOS tube, enough power, no flicker when shooting on mobile phones.

● 0%-100% fully dimmable, easily adjustable brightness to suit different needs and preferences with the rotatable knob.

● Controller for Single Color LED Strip Lights, such as single color 5050 3528 light bar.



Specifications:

Led Dimmer:

● Material: metal and plastic

● With automatic memory function

● Input voltage: DC 12-24V

● Input current: 0-30A

● Power: 12V (1W~360W)/ 24V (1W~720W)

● Working temperature: -20 ~ 60 ℃

● Size:66 mm (L) x 61 mm (W) x 35 mm (H)(include knob)



Note:

1.Not suitable for multi-color mix Bonded LED lamps (such as RGB lamps / lamps, table lamps, fans, energy saving lamps, incandescent lamps, etc.).

2.Please turn off power before installing this dimmer in case of electricity shock.



5M 22AWG Extension Cable:

● Wire Gauge : 22AWG

● Max Voltage : 300V

● Max Temperature: 80 degrees

● Insulation Material: PVC

● Conductor Material: Non-alloy Oxygen-free Copper

● Product Length: 5m

● Sheath Color: Black and Red



DC Female Power Cord Specification:

● Connector: 5.5 * 2.1mm

● Length: 30cm

● Material: Pure copper wire core, good electrical conductivity. Cable is made of insulated PVC material. The body is soft, flexible, and resistant to aging

● Red is positive, Black is negative



Product List:

1 x Upgraded LED Dimmer

1 x 5m 22AWG Extension Cable

1 x DC Female Power Cord

• 【Upgraded Led Dimmer】: Our product uses high quality MOS tube, enough power, no flicker when shooting on mobile phones. 0%-100% fully dimmable, easy adjustment of brightness through knob to meet different preferences and needs.
• 【Protection for LED】: Change the brightness of the lamp by controlling the voltage and current output. PWM digital dimming to avoid avoids rush current and protects your LED lights.
• 【Easy to Use】The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
• 【5m 22AWG Extension Cable】: Features flame retardant, anti-aging, acid and alkali resistance and dampproof. 5M extension cable suitable for 3528/5050 single color led strip ligh. What's more, it will convenient for you to install the light bar to the appropriate location.
• 【12V DC Female Connector】: Provides a simple and secure DIY solution for DC power connection, work with a power adapter or a power supply box.

User questions & answers

Question:	Can this be used in a vehicle to control 12v cob led's used as additional fog/reverse lights
Answer:	I used it in two cases for household behind a 12v 30 and 60 amp power supplies, respectively. I see no reason why it wouldn't work in your case. It's just a simple rheostat.
Question:	Can this dimmer control only one or two separate 12v led landscape lighting passes
Answer:	It is for a single circuit. Single positive and negative input and single positive and negative output.
Question:	why does this dimmer make the led driver ring with a high pitch sound, almost like a dog whistle? Annoying
Answer:	I really don't know the answer, but my first thought was that you were trying to dim an LED that is not designed to be dimmed.
Question:	Can the knob be removed so the the box is inside a project box and the knob it outside a project box
Answer:	The dimmer is made to be surface mounted because is not dangerous is only cosmetic look

• Support single pole or 3-way applications, decor wall plate included. Only one dimmer switch can be installed per 3 way circuit
• LED Dimmer Light Switch: Provides the best dimming performance for LED bulbs. Simple and elegant horizontal slider dims and brightens with ease for full range light control
• Adjuster Dial: Ensures compatibility with almost all dimmable LED, CFL, incandescent and halogen bulbs, up to 150 watts of dimmable LED/CFL lamps or 600 watts of incandescent bulbs
• Smart Rocker: On/Off rocker switch remembers the last dimmed light setting and turns on to that exact light level
• 3 year warranty. UL listed. NOTE: The dimming range of dimmable LEDs may vary from manufacturer to manufacturer. This dimmer has an adjustable dimming range. Please rotate the side adjustment wheel to eliminate flicker issues

Product features

BESTTEN Modern Dimmer Switch

BESTTEN dimmer switch provides smooth, sliding and full-range dimming performance for dimmable LED, CFL, halogen and incandescent bulbs. The slider can dim and brighten your lights precisely and conveniently, creating a romantic mood or a casual atmosphere for family activities.

• Single pole or 3-way
• No neutral required
• Large ON/OFF rocker paddle switch
• Precise full-range dimming control
• Wide range of compatibility with sensitivity dial
• Wallplate included

Specifications

Voltage.....................................................................................................120V, 60Hz

Dimmable LED/CFL................................................................................Max. 150W

Incandescent/Halogen.............................................................................Max. 600W

Switch Type.............................................................................................Single Pole/3-Way

Wiring Type..............................................................................................Wire Pigtails

Operation Temperature...........................................................................32°F (0°C) --- 104°F (40°C)

Remind:

One circuit can ONLY install one dimmer switch.

Troubleshooting

Symptom:

- Bulbs turn off while being dimmed.

- Bulbs turn on at high light level but do not turn on at a low light level, or take too long to turn on at low end.

- Bulbs flicker or flash when dimmed do a low light level.

- Bulbs or dimmers are buzzing.

Solution:

1. Verify all bulbs are marked dimmable.

2. Remove wallplate and locate sensitivity dial.

3. Turn up (counter-clockwise) sensitivity dial slowly until symptom is no longer present.

Product description

Led Dimmer :

● 12V/24V DC 30A LED PWM Dimmer.

● High quality MOS tube, enough power, no flicker when shooting on mobile phones.

● 0%-100% fully dimmable, easily adjustable brightness to suit different needs and preferences with the knob.

● Controller for Single Color LED Strip Lights, such as single color 5050 3528 light bar.

● High quality aluminum housing provides excellent anti-corrosion and heat-dissipation capacity and ensures a long-lasting performance even in harsh environments.

● Easy to use. The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.



Dimmer Specifications :

● Material: metal and plastic

● With automatic memory function

● Input: DC 12-24V

● Output: 1 Channel 360W 12-24V (0-30A),360W-720W

● Working temperature: -20 ~ 60 ℃

● Size:66 mm (L) x 61 mm (W) x 35 mm (H)(include knob)



Note:

1.Not suitable for multi-color mix Bonded LED lamps (such as RGB lamps / lamps, table lamps, fans, energy saving lamps, incandescent lamps, etc.).

2.Please turn off power before installing this dimmer in case of electricity shock.



5m 22AWG Extension Cable:

● Wire Gauge : 22AWG

● Max Voltage : 300V

● Max Temperature: 80 degrees

● Insulation Material: PVC

● Conductor Material: Non-alloy Oxygen-free Copper

● Product Length: 5m



DC Male Female Power Cord Specification:

● Connector: 5.5 * 2.1mm

● Length: 26cm

● Material: Cable is made of insulated PVC material. The body is soft, flexible, and resistant to aging

● Red is positive, Black is negative



Product List:

1 x Upgraded LED Dimmer

1 x 5m 22AWG Extension Cable

1 x DC Female Power Cord

1 x DC Male Power Cord

1 x User's Manual

• 【New Design Light Strip Dimmer】The PWM Dimmer made of high quality MOS tube, 0%-100% fully dimmable, enough power, no flicker when shooting on mobile phones, easily adjustable brightness with the rotatable knob.
• 【Protection for LED】PWM digital dimming avoids rush current and protects your LED lights.
• 【16.4ft 22AWG Extension Cable】: With the cable, convenient for you to install the light bar to the appropriate location. 5m extension cable suitable for 3528/5050 single color led strip ligh.
• 【DC Male & Female Connector】: Provides a simple and secure DIY solution for DC power connection, work with a power adapter or a power supply box.
• 【Widely Application】Compatible with DC 12V-24V MAX 30A LED light application, single channel dimming controller for single color LED strip lights.

• Easy to Operate: LED strip light dimmer switch is Knob-operated control. Just rotate the knob to adjust the brightness or simply turn on/off the lights.
• Neither Flicker nor Current Surges: PWM Digital Dimming Technology: 0% - 100% dimming, no flicker at low brightness, no rapid changes, very linear and smooth setting.
• Can be Concealed & Easy to Install: A small and not noticeable unit in the size of 61x33x32mm can be easily concealed. Also easy to install when using mounting clips.
• Widely Used: Led dimmer controller is used for Single Color 3528,5050,5630,5730,3014 LED strip light, LED ribbon, LED rope light
• Note: DO NOT Exceed Current Capabilities: The working voltage is DC 12V-24V and the working current is less than 6A with single channel. Please do keep it within its specifications.

User questions & answers

Question:	can you cut off the ends for a direct wire instead of the quick plugs you see attached
Answer:	As long as you keep the amp load within its specs it will work fine. I use them on 5050 strip lights in the house.
Question:	how many watts can i run thru your dimmer? I'm planning on using in on a 16' string of 600 leds
Answer:	It isn't a motion sensor, rather a dimmer. But as a dimmer it should work as above provided that you aren't exceeding its current capabilities. Guessing here, 3W per foot x 32ft is about 100W. So probably not, since they handle up to 24W each.
Question:	Is it compatible with 5730 led
Answer:	Standard Decora style.
Question:	Will this motion sensor work when using a dc splitter? setup = 3a dc adapter > motion detector > dc 2x splitter > one 16 foot led strip on each split
Answer:	Yes there are three indicators available by pressing the bottom of the panel left, down, or right

Product features

Specification:

• Color: Black
• Supply voltage: DC12V-24V
• Output:1 channel
• External dimension: L61 x W33 x H32mm
• Power output(max): 72W
• Working temperature: -4~140ºF（-20-60°C）
• Output current(max): 6A
• Static power consumption: ≤1W
• Compatible with LED lighting devices that need the 0~36W power supply at DC12V, or 0~72W power supply at DC24V.

Adopt the rotary button

Rotate button to the left, brightness will be brighter, when you rotate it to the far left, the brightness is greatest.

Rotate button to the right, brightness will be darker, when you rotate it to the far right, the light will be turned off.

Pulse Width Modulation (PWM) technology

Pulse Width Modulation (PWM) technology, can dim single color LED strip and any DC 12V input LED products with common anode (12v+) leads from 0% to 100%.

Inline LED Dimmer Switch

This dimmer is widely used on DC12V-24 LED lighting devices, such as LED strip light, aquarium lighting, etc. Its control mode is inline.

Product description

LED Strip Light Dimmer, Dimmer Switch DC12V~24V 30A Dimming Controller for LED Dimmable Lights, Single Channel for 5050 3538 Single Color Tape (2-Pack)

• [Easy to Use]: LED strip light dimmer switch is Knob-operated control with Aluminum Housing. Just rotate the knob to adjust the brightness or simply turn on/off the lights.
• [Stepless Dimming]: Save some cash on energy by reducing the light level in your indoor or outdoor lights with this light dimmer. No flicker at low brightness, very smooth.
• [Flexible Usage]: This dimmer is widely used on DC12V-24 LED lighting devices, output max 30A, single channel dimming controller for single color LED strip lights, such as LED strip light, aquarium lighting, etc.
• [Atmosphere]: Change the environment of your kitchen, dining room, living room or bedroom by changing the intensity of the lights.

Product description

Toggle switch turns lights on/off and returns light to preset level. Use slider to select desired brightness level. Utilizes HED Technology, which features advanced dimming circuitry that is designed for compatibility with most dimmable CFL and LED bulbs. Wall plate not included. Up to 150W dimmable CFL/LED bulbs or 600W incandescent/halogen.

From the Manufacturer

Control your dimmable CFLs and LEDs with Lutron's dimmable C.L dimmers! Screw-in dimmable compact fluorescent lamps (CFLs) and screw-in dimmable light emitting diode lamps (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, dimming them may be difficult. Lutron's new dimmers with HED Technology provides a solution to alleviate your dimmable CFL and LED dimming challenges, while setting the right light level to improve mood and ambiance. Install the Toggler C•L Dimmer to soften the light of your high efficacy bulbs by adjusting the discreet slide to your desired brightness. Then use the switch to turn the lights all the way off, or on to the preset level. Lutron dimmers with HED Technology also provide full-range dimming for halogen and incandescent bulbs, ensuring today's dimmer is compatible with tomorrow's light sources. The dimmer can even dim a mixed load of light sources (i.e. LED and halogen or CFL and LED bulbs on the same circuit), while matching the look of your existing toggle switches.

• Tested on 1, 000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Technical Specification"
• Provides over 250 lighting levels so you can create the perfect light for any activity
• Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs
• Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home
• Can be used in single-pole or 3-Way applications, where lights are controlled from one or two locations

User questions & answers

Question:	Can this dimmer be used for xenon lights? If not, what type do I need
Answer:	NO!!!!!!!! If you use D3S instead of D1S, it is likely to cause flickering or burnout. Please check the model on the owner's manual before buying
Question:	i have two black wires, 2 red wires and a ground going into the one I am replacing, this only has 3 hookups, any way around this
Answer:	The warranty specified on the manual is two years. I have used it for two years so far, and there is nothing wrong with it.
Question:	Anyone know the difference between the "Ariadni" switch (AYCL-153P) and the "Toggler" switch (TGCL-153P
Answer:	You could watch the installation video on youtube
Question:	Can this be used (minus plate) to replace 1 switch in a 3 or 4 switch box? Will the actual switch plus dimmer lever be too wide for the plate hole
Answer:	6000k is pure white

Product features

Cutting Edge Technology

Our patented easy-to-set adjustment lever allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs, and is the only dimmer UL listed to control mixed loads (different types of bulbs, such as LEDs and halogens, on the same circuit)

Fast and Easy Installation

All you need to replace your existing switch or dimmer is about 15 minutes, 3 simple steps and 1 screwdriver

Works Well with LEDs

Tested on 1,000’s of bulbs and dozens of brands to ensure flawless dimming. Check out our website for our list of recommended bulbs

Product description

Lutron LED+ dimmers provide the best dimming performance for LED bulbs while setting the right light level to improve mood and ambiance for any activity. Designed specifically for dimmable lads and CFL, as well as for use with traditional incandescent and halogen bulbs, they greatly improve the dimming performance when compared to standard dimmers. Featuring advanced circuitry designed to alleviate common challenges, like flicker and pop on, LED+ dimmers are compatible with 800+ bulbs - for more specific details on compatible bulbs, view "technical specification" below. The Diva dimmer matches existing decor a style switches and fits in a standard decor a style wall plate (CW-1-WH). it features a large paddle switch that turns the lights on/off and returns them to your favorite preset setting, along with a discreet slider that brightens or dims the lights to suit any activity.

• Provides the best dimming performance for dimmable LED bulbs (compatible with 800+ bulbs - for more specific details view technical specification" below)
• For use with up to 150-Watts of dimmable LEDs and up to 600-Watts of Incandescent and Halogen bulbs
• Features a large rocker paddle to turn lights on/off or to preset level and a discreet slider to brighten/dim lights to suit any activity
• Can be used in single-pole or 3-way applications
• Installs in as little as 15 minutes
• Includes Diva LED+ (formerly C.L) Dimmers; coordinating wallplates sold separately

User questions & answers

Question:	Can this item post to China directly from your warehouse
Answer:	sorry . can not sell to china.
Question:	Do these come in a version without the logo on the front
Answer:	no
Question:	Is there a compatible led edison e26 bulb
Answer:	Currently, there is no industry standard or regulation for the manufacturing of LEDs and the performance will vary with different dimming controls. With this information in mind, Lutron performs extensive testing on a variety of LEDs from many different manufacturers and posts our most up to date testing information on our LED compatibility tool. Lutron would suggest visiting www.lutron.com/ledfinder to determine compatibility with your LEDs. Please feel free to reach out to our Support Team at [email protected] or by phone at 1 (844) 588-7661 with any questions/concerns.
Question:	I installed these dimmers with LEDP3120WH - 120V Direct LED Puck Light Kit. When I turn the power back on the lights pulse/flicker constantly. Ideas
Answer:	I am posting what my husband said as he installed he dimmer. It depends on the "kit" and the light bulbs used. I noticed some LED bulbs (or those "curly" bulbs) do not work with dimmers.

Product features

Cutting Edge Technology

Out patented easy-to-set adjustment lever allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs, and is the only dimmer UL listed to control mixed loads (different types of bulbs, such as LEDs and halogens, on the same circuit)

Blend In or Stand Out

Available in 25 colors so you can choose a finishing touch to your room that seamlessly blends in or a color that is meant to pop

Works Well with LEDs

Tested on 1,000's of bulbs and dozens of brands to ensure flawless dimming. Check out our website for our list of recommended bulbs

Product description

Bring technology and style to your home with the Lutron Maestro C×L Dimmer, the first digital dimmer that is compatible with all of today's bulbs types dimmable CFL and LED, halogen, and incandescent. This digital dimmer gradually turns lights on and off, allowing your eyes to adjust to the new light level. LED's display the light level and glow softly in the dark, acting as a locator light so you can easily find the control in the dark. Use the rocker to adjust the light level for any activity or set the preset level to ensure lights always turn on to your desired light level. Advanced features include delayed fade to off, which allows time to exit a room or to get into bed before the lights turn off. Installing the Maestro C·L is simple and quick, and is perfect for any room in the home. It also coordinates with the entire Maestro family of controls including dimmers, switches, occupancy sensors, and more. Coordinating Claro wall plate is not included.

• Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Technical Specification" below
• Provides over 250 lighting levels so you can create the perfect light for any activity
• Works with up to 150 Watts of dimmable LED/CFL bulbsor 600 Watts of Incandescent/Halogen bulbs For list of recommended bulbs, view "Technical Specification" below
• Lutron patented technology to optimize the dim range of your bulbs and prevent interference with other dimmers in the home
• Can be used in single-pole or 3-Way/multi-location dimming applications (up to 10 locations, Maestro companion dimmer MA-RR-XX required)

User questions & answers

Question:	Is anyone using this with an LED and if so, for how long and how is it working? Thanks
Answer:	I'm using this with two 12.5W Soraa High-CRI "Vivid" series LED PAR30 4000K bulbs (total controlled load: 25W) and it is the finest dimmer switch I've ever used. With the "Advanced mode" custom programming (Technical document: www.lutron.com/TechnicalDocumentLibrary/048459.pdf) to adjust the "low trim" (dimmest point) I can get these bulbs to be on and stable at only
Question:	Can this handle dimming LED lights all the way down so they are actually dim, like the incandescents? Yes, I have an LED light bulb that is dimmable
Answer:	I have the Wafer 6 in. White Integrated LED Recessed Kit that Home Depot sells. They say they can go down to 10%.. I had another switch in previously that the lights wouldn't dim down as far and would turn off randomly when dimmed down all the way. If you use the adjustment feature in this switch it seems like they go down to that no problem. I've been running them for a day and no flickering or turning off. If anything changes I'll leave an updated comment or update this answer. Two factors you'll need to look at: 1) what is the LED bulb rated to go down to 2) Is this dimmer compatible? If your LED bulb says it can do it try many different dimmers until one works :)
Question:	The max brightness seems lower than when I had a non-digital dimmer. How do I adjust? I see instructions for the lower dim range but not the max
Answer:	Please see Lutron's Application Note #459. All of these settings are NOT listed in the manual that came with your switch. www.lutron.com/TechnicalDocumentLibrary/048459.pdf You want to adjust IL7, the high-end trim.IL1: Preset Light Level (last setting or set permanently)IL2: Fade ON Time (0.75 to 15.0 seconds)IL3: Fade OFF Time (0.75 to 15.0 seconds)IL4: Delayed Fade to OFF (time to leave the room - 10 to 70 seconds)IL5: Enable/Disable Indicator Lights (LED dots off or on)IL6: Low-End Trim (minimum brightness)IL7: High-End Trim (maximum brightness)
Question:	how much power do led indicator lights draw
Answer:	Approximately 0.02 Watts (2 cents per year at $0.10/kWh) if they did the job right of designing it (switching converter,) and 0.25 Watts (20 cents per year at $0.10/kWh) if they took the lazy way out (simple resistor.)

Product features

Cutting Edge Technology

Our patented easy-to-set adjuster via button press programming allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control Up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs and is the only dimmer UL listed to control mixed loads (different types of bulbs on the same circuit).

Blend in or Stand Out

Available in 25 colors so you can choose a finishing touch to your room that seamlessly blends in or a color that is meant to pop.

Works Well with LEDs

Tested on 1,000s of bulbs and dozens of brands to ensure flawless dimming. Check out the Lutron website for our list of recommended bulbs.

Product description

Lutron LED+ dimmers provide the best dimming performance for LED bulbswhile setting the right light level to improve mood and ambiance for any activity. Designed specifically for dimmable lads and CFL, as well as for use with traditional incandescent and halogen bulbs, they greatly improve the dimming performance when compared to standard dimmers. Featuring advanced circuitry designed to alleviate common challenges, like flicker and pop on, LED+ dimmers are compatible with 800+ bulbs- for more specific details on compatible bulbs, view "technical specification" below. The Diva dimmer matches existing decor a style switches and fits in a standard decor a style wall plate (CW-1-WH). It features a large paddle switch that turns the lights on/off and returns them to your favorite preset setting, along with a discreet slider that brightens or dims the lights to suit any activity.

Create the perfect amount of light while utilizing the latest energy-saving technology with the Lutron Diva C•L Dimmer. Designed for use with 150-watt dimmable CFL or LED lights, the Lutron Diva C•L dimmer features a large paddle switch that automatically returns to your favorite pre-selected light level, a discreet slider to adjust light levels, and a sleek, modern wallplate.

Diva C•L Dimmer At a Glance: Dimmer works with most dimmable CFL/LED bulbs, as well as incandescent and halogen bulbs Slider for precise light control and paddle switch for easy on/off HED technology improves the performance of dimmable CFLs and LEDs over standard dimmers Adjustment dial to set bottom of dimming range for your bulb type Single-pole and three-way applications One-year limited warranty; UL-listed for a broad range of dimmable CFL/LED bulbs

Adjustment dial fine tunes dimming range for your specific bulb.

The C•L Dimmer works with a combination of CFL, LED, halogen, and incandescent bulbs and can be used on the same circuit.

Precise Light Adjustment with Slider

Whether you're reading, watching TV, entertaining, or enjoying a romantic dinner, the Lutron Diva C•L Dimmer lets you choose the right level of light for your activity. It's easy to make subtle adjustments using the discreet slider next to the large paddle switch. When you use the paddle switch to turn lights off and on, it defaults to your preferred lighting level.

Works with Dimmable CFLs and LEDs for Increased Energy Savings

The Lutron dimmer works with dimmable CFLs and LEDs up to 150 watts, a great energy-efficient alternative that can last up to 10 times longer than incandescent bulbs. Plus, by using less electricity, theses bulbs help protect the environment by reducing the amount of carbon dioxide released into the air.

HED Technology for Enhanced Performance

Thanks to Lutron's HED technology, this dimmer actually improves the performance of dimmable CFLs and LEDs compared to standard dimmers by eliminating flicker, ensuring lights stay on when they are dimmed to a low level, and making sure lights operate properly at all levels. Lights will stay on even during voltage fluctuations, which can happen when a device like an air conditioner or a hair dryer is operated nearby. For safety, the dimmer is UL listed for a broad range of dimmable CFL and LED bulbs.

Compatible with Other Lightbulbs and Mixed Loads

For added functionality, the dimmer also provides full-range dimming for halogen and incandescent bulbs. There is an adjustment dial to set the low end of dimming range for your bulb type for most efficient operation.

The dimmer also works with a mixed load of light sources, so a combination of CFL, LED, halogen, and incandescent bulbs can be used on the same circuit. It can be used for single-pole and three-way applications.

Fast and Easy Installation

Installation is easy--just replace your existing light switch with the Lutron Diva C•L Dimmer and install in less that 15 minutes. A modern wallplate--with no visible screws--blends into the surrounding wall for a subtle finishing touch.

The Lutron Diva C•L Dimmer is backed by a one-year limited warranty.

What's in the Box

Dimmer and screwless wallplate.

Set the perfect mood lighting for any room with the Diva C•L Dimmer.

From the Manufacturer

Control the next generation of lighting with Lutron's dimmable C.L dimmers! Screw-in dimmable compact fluorescent lamps (CFLs) and screw-in dimmable light emitting diode lamps (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, dimming them may be difficult. Lutron's new dimmers with HED Technology provides a solution to alleviate your dimmable CFL and LED dimming challenges, while setting the right light level to improve mood and ambiance. The Diva dimmable CFL/LED dimmer with HED Technology features advanced dimming circuitry that is designed for compatibility with most high efficacy light bulbs. With the same features as Lutron's Diva dimmer, the large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light level to suit any activity. These dimmers improve the dimming performance of dimmable CFLs and LEDs compared to standard dimmers. Lutron dimmers with HED Technology also provide full-range dimming for halogen and incandescent bulbs, ensuring today's dimmer is compatible with tomorrow's light sources. The dimmer can even dim a mixed load of light sources (i.e. LED and halogen or CFL and LED bulbs on the same circuit).

• Provides the best dimming performance for LED bulbs(for list of approved LEDs, see 'Technical Specification' below)
• For use with up to 150-Watts of dimmable LEDs or up to 600-Watts of Incandescent or Halogen bulbs
• Features a large rocker paddle to turn lights on/off or to preset level and a discreet slider to brighten/dim lights to suit any activity
• Can be used in single-pole or 3-way applications
• Installs in as little as 15 minutes. Operating temperatures 32 °F to 104 °F (0 °C to 40 °C)
• Includes Diva LED+ (formerly C.L) Dimmer Switch and coordinating wallplate

Product features

Lutron LED+ Dimmers provide over 250 lighting levels, so you can set the right light for any activity

• Large paddle switch to turn lights ON/OFF
• Sleek slider on the side to manually dim or brighten lights
• Technology that allows for smooth dimming of the broadest range of LEDs
• Patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home
• Tried and true aesthetic to match designer/decorator style switches and accessories

Cutting Edge Technology

Our easy-to-set adjustment lever allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs, and is the only dimmer UL listed to control mixed loads (different types of bulbs, such as LEDs and halogens, on the same circuit)

Blend In or Stand Out

Available in 25 colors so you can choose a finishing touch to your room that seamlessly blends in or a color that is meant to pop

Works Well with LEDs

Tested on 1,000’s of bulbs and dozens of brands to ensure flawless dimming. Check out our website for our list of recommended bulbs

Product description

This LED Dimmer/RGB Controller can be used as a 3 channels LED single color strip light dimmer a LED RGB module / Flexible LED Strips as a static color controller.

Universal Red/Green/Blue(RGB) dimmer-konbs can be used to adjust Red, Green and Blue from 0 to 100 percent for full range color creation. Endless RGB color combinations.

Installation is quite easy, power up the unit with 12 to 24V DC power source and connect 3 output connection to RGB LED strip light or a Solid Color LED strip light. Electric wires and cables are easily connected to the unit through screw

down connectors, which makes 100% secure connections.

Applications:

-For RGB LED strip controlling and dimming each color independently.

-For solid color LED strip with 3 independent channels

-For dynamic White LED strip, controlling color temprature

-For RGB modules

User questions & answers

Question:	What's the idea with the plastic covers for the connectors? You'd think screws were missing but none are shown in photo. Or that they would snap shut
Answer:	Using the maximum rated power of the controller of 9 amps and 24 volts gives us a maximum of 216 watts!!!! Soooooo, I'd guess 3 watts would be well within the safe zone. Enjoy yourself!
Question:	What type of potentiometers are used for this assembly? How many ohm
Answer:	As long as both strips are using the same voltage or you're using a single strip with shared +12-24V, it should work fine. You'll end up with one unused potentiometer for dual-color white.
Question:	Is it possible to (dim) play with the rgb colors from a 3w rgb full color high power led on a star base with this dimmer. i like to hear from you
Answer:	I haven't cut the wires. These individual wires would be a very small gauge. If you are asking this question, you probably have the skills and equipment to do it. If I needed to I wouldn't hesitate. I would stagger the cut wire ends so the splices would offset each other.
Question:	Can you use this on dual white led strips vs rgb
Answer:	They are rated at 6 amps. So don't exceed that. Also there are complete kits of single color 16' with 600 leds available.

Product description

Control your dimmable CFLs and LEDs with Lutron's LED+ CFL/LED dimmers. Screw-in dimmable compact fluorescent lamps (CFLs) and screw-in dimmable light emitting diode lamps (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, your standard dimmer will not dim these light sources. Lutron's new LED+ dimmers provide a reliable dimming solution for dimmable CFLs and LEDs, that are easy to install and use. Maximize the dimming range of your bulb(s) by using the adjustment dial to set the low end dimming point of your bulb. Then use the Toggler LED+ Dimmer to soften the light of your high efficacy bulbs by adjusting the discreet slide to your desired brightness. Use the switch to turn the lights all the way off, or on to the preset level. Lutron LED+ dimmers also work with incandescent and halogen bulbs, ensuring that your dimmer works with all dimmable light sources. Lutron LED+ dimmers are the only dimmers in the market that are approved and UL listed to dim a mixed load of light sources on the same circuit (i.e. LED and halogen or CFL and LED bulbs), while matching the look of your existing toggle switches. View the demo under the product image to see how easy it is to install and use Lutron LED+ dimmers, along with a link to approved bulbs for optimal dimming performance.

• Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Technical Specification"
• Provides over 250 lighting levels so you can create the perfect light for any activity
• Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs
• Lutron patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home
• Can be used in single-pole or 3-Way applications, where lights are controlled from one or two locations
• Toggle switch turns lights on/off to favorite light level. Small slider dims and brightens the lights
• Installs in as little as 15 minutes in homes of all ages – NO NEUTRAL REQUIRED
• Includes Lutron Toggler LED+ (formerly C.L) Dimmer Switch; coordinating wallplate sold separately

User questions & answers

Question:	Is this considered triac based (forward phase control or leading edge) or 0-10v switch
Answer:	The switch generates heat so it has tabs on both sides to prevent you from mounting them side by side without being aware that you have to "derate" them if you want to install them side be side. In other words, you can put 600 watts of incandescent bulbs on one dimmer if you mount it alone but only 500 watts of incandescent on a dimmer with one side tab removed (you remove only the tab(s) that overlap) and only 400 watts load with both tabs removed (as you would do mounting 3 switches in a standard 3 gang box). They also include a chart for derating when you mix CFL/LED bulbs with incandescent.
Question:	do I need two of these switches in a 3-way application or can I use one dimmer with a normal 3-way on the other end
Answer:	I was wondering this exact same question, so I called Lutron and learned that they're the exact same switch. The model numbers differ because they're marketed/sold differently (e.g. Home Depot vs. other stores). So, if you find one cheaper than another, as I've done here on Amazon, buy the less expensive one!
Question:	Can you fit three of these switches side by side in a standard 3 gang box
Answer:	The plastic cover can keep out the dust and make the connection safe.
Question:	Anyone know the difference between the "Ariadni" switch (AYCL-153P) and the "Toggler" switch (TGCL-153P
Answer:	I don't know the value of the potentiometers but definitely you shouldn't think they are simple voltage divisors. I guess they control the pulse width and probably are carbon type.

Product features

Cutting Edge Technology

Our patented easy-to-set adjustment lever allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs, and is the only dimmer UL listed to control mixed loads (different types of bulbs, such as LEDs and halogens, on the same circuit)

Fast and Easy Installation

All you need to replace your existing switch or dimmer is about 15 minutes, 3 simple steps and 1 screwdriver

Works Well with LEDs

Tested on 1,000’s of bulbs and dozens of brands to ensure flawless dimming. Check out our website for our list of recommended bulbs