12 best sensors with hubs

Product description

Cautions: All the Aqara products sold by AqaraDirect are the official models of US version. Products purchased from unauthorized sellers are NOT eligible for and replacement by Aqara.

• NOTES: Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. One Aqara Hub can connect up to 32 Aqara devices.
• FLOOD DETECTION: Whenever the Aqara Water Leak Sensor detects water, it can send an alert to your phone and activate the local alarm on the Aqara Hub to prevent leaks and flooding.
• HOME AUTOMATION: Controls and triggers Aqara connected devices when excess water is detected.
• WIRELESS & SENSITIVE: No wiring or screws are required. The ultra mini design allows you to put it anywhere that dripping and leaking could happen. Our water leak sensor is designed with sensitive leak probes which the threshold of the water level is 0.5mm.
• INDUSTRY-LEADING QUALITY: Durable IP67 water-proof housing with rust-proof exterior coating.

User questions & answers

Question:	Is this unit Z-Wave Alexa and ring compatible
Answer:	not sure that is a question for manufacturer!
Question:	I was about to buy a few sensors because the price was $15.99 and all of the sudden the price went back to $99.99. Why is this so expensive
Answer:	The power cord is 6 feet 3 inches. Be careful which version of this 220V welder you get.You want the most up to date model with the most power. The are not all the same.
Question:	What is the best location for placement in a bathroom, considering a toilet or sink could potentially leak
Answer:	You can weld 1/4 inch material. The weld joint may need to be beveled for full penetration.If you really want to weld 1/4 inch material easily I would use a Miller 211 machine which welds up to 3/8" thick material.I know because that is what I have now. A miller 211. The Miller has auto set which takes the guess work out.The Miller 211 is 110V or 220V. The Miller has a blue light that blinks when you need to be using 220V for 1/4 or thicker material.
Question:	What does homekit add to the use of this product? does a homekit hub replace this product's hub
Answer:	Just acquired 60 lb. argon/co2 mix. Will use MIG soon and check for 10 lb. roll fit. Let you know.

Product features

Aqara Water Leak Sensor

Whenever water is detected, the Aqara Water Leak Sensor will send an alert notification to your phone and activate local alarm on the Aqara Hub.

Communications between Aqara Hub and Aqara devices can reach up to 20 m (65 feet) under normal conditions. It depending on terrain and building structure. Aqara Smart Plug and Aqara Smart Wall Switch can also be used as a signal repeater to extend signal coverage.

Easy Setup and Maintenance

Most Aqara devices require no wiring and screws. With the Aqara App and its easy-to-follow instructions, you can set up your smart home in no time. Aqara devices are also made to consume very little energy, and most Aqara products can last over 2 years without changing batteries.

Peace of Mind

Aqara can always provide you with the comfort of knowing what’s happening at home while you’re away. With a wide range of sensors, Aqara can trigger the alarm sound or send you an alert notification when unexpected entry, movement, temperature change, or water leak is detected.

Remote Control and Automation

Aqara provides you with countless ways to control your smart home, whether it be through your phone, wireless switches, or voice commands via 3rd party voice assistants. Set different automations and scenes to control your electronic devices based on the time of day or your personal preference. Your house will always be at your command no matter where you are.

Compatible with Most Voice Assistants

Aqara Hub is designed as high-compatibility smart home control center. Aqara devices into Apple HomeKit and Xiaomi Mi Home to work with other compatible devices for alarm systems, home automation, and voice commands. For example, you can set an “Away Mode” and activate the scene using your voice.

Product description

OVAL is an all-in-one smart sensor that monitors and alerts you in real-time to theft, floods, water leaks and unsafe or unhealthy conditions in and around the home - without invasive cameras or microphones. Turn any ordinary room, area, or object into a smart one instantly with 24/7 monitoring of temperature, light, humidity, motion and water. OVAL is a DIY (do it yourself) security system, environmental monitor, leak detector and more --- designed to improve home awareness and increase peace of mind.

• All-in-one home awareness: Every OVAL sensor can detect theft, floods, leaks, unhealthy or unsafe conditions and more with 24/7 monitoring and real-time alerts for sudden or gradual changes in temperature, light, humidity, motion and water.
• No cameras or microphones: OVAL is privacy-focused so you can protect your home without invading your or others privacy.
• Make anything smarter: Turn any ordinary room, area, or object into a smart one - instantly. Place an OVAL on doors, windows, cabinets, or desks for an instant security system, monitor areas or items for water leaks or changes in light, temperature and humidity to create a safer and healthier environment while protecting from theft and damage.
• Works with: Connect OVAL to Amazon Alexa, Google Home and IFTTT-enabled smart devices, switches and plugs to automate your home in new ways, conserve energy and reduce utility bills.
• DIY (Do it yourself): Set up in about 10 minutes. Fully customizable. Notify up to 12 additional contacts through 4 types of alerts (push, text, email, call). Connect more sensors and hubs as needed.

User questions & answers

Question:	Does this use a zigbee protocol? Love the look of the sensor but want to know if I can use them with home assistant
Answer:	Not sure of which country but totally not a good plied. I’ve been welding 31 years & this has to be some of the worst pliers I’ve ever bought.
Question:	Do i need the oval hub if i already have an amazon echo plus hub
Answer:	HI, If used properly the FO-103 tools can make 3,000 preps or more. Thank you
Question:	Does this detect water temperature like for a hot tub
Answer:	This tool is made in the USA , Cromwell, CT
Question:	Are additional oval sensors available? Don’t see any listed on Amazon or Oval
Answer:	There is no marking on the pliers and I do not have the packaging any longer but I will say they seem to be very well made and extremely useful, one of those tools I wouldn't want to be without. Jaye Walton

Product features

Environmental Monitor

Detect hot, cold, dry or humid conditions which may create mold or negatively affect health

Save Energy & Reduce Utility Bills

Detect when lights, heating or cooling systems are on or off to conserve energy and save money

24/7 Home Security

Know when doors, windows or personal items and areas detect motion - without cameras or microphones.

Real-Time Monitoring & Alerts

Detect flooding, water leaks and sudden or gradual changes in temperature, light and humidity

Create a Safer Home

Detect motion, water or changes in temperature, humidity & light in or on dangerous items & areas

• 【HIGH COMPATIBILITY】: BroadLink RM4 mini Wi-Fi smart IR hub supports 50,000+ IR controlled entertainment and life appliances, such as TV, Air Conditioner, Set top box, Streaming player, Video Recorder, DVD, Projector, Amplifier, Home Theater, Sound Bar, Home Stereo, Fan, etc. Supported IR library is constantly being updated by the cloud to ensure newer devices are always compatible. Option to program the ir remote devices and learn buttons if no available cloud data is matching with.
• 【TV / AC CONTROL】: – Voice control your TV with On/Off, Volume control, Change channel by number/name, Switch input, Play, Fast forward, Rewind, Pause, Stop, Previous, Next…Smart AC controller, voice control your aircon with On/Off, Temperature, Fan speed, mode…With free easy-to-use BroadLink App for iOS and Android, your phone will be a smart remote, you can remotely control your IR devices no matter you are at home or away.
• 【VOICE CONTROL AND IFTTT】: Works with Alexa or Google Assistant and IFTTT (“BroadLink” skill/service). An ideal alexa/google home accessories for home. Simple setup with Amazon Echo or Google Nest to easily voice control your IR devices, and more home automation settings can be added by IFTTT. Siri voice control is also available on iPhone.
• 【FEATURES】: Create multiple timers and customized scenes as you need to control your smart home devices. Simple and easy setup to create a smart house for you. Supports external Temperature and Humidity detection of the room where the device located, which will be displayed in BroadLink App. You can easily set triggers, such as turn on your air conditioner automatically when the temperature rises.
• 【QUALITY & TECH SUPPORT】: Global 24/5 call center support from 6 regions. If you have any problem with the IR hub connection problem, pls feel free to contact us. NOTE: Require a secured 2.4GHz Wi-Fi networks. The package comes with a USB sensor cable (without adapter). RM4mini is a IR smart remote. If you also want to control RF appliances, pls choose our RM4 pro.

Product features

BroadLink IR Universal Remote RM4 mini with Sensor Cable

BroadLink IR Universal Remote integrates control of your IR appliances in one easy-to-use app "BroadLink". With Alexa or Google Assistant, it gives you hands-free voice control of your devices, like turning on/off your TV or turning up/down the volume via voice command.

All in One

Suffering pains of too many remotes? Add unlimited IR appliances and ditch all your remotes.

TV Control by Voice

Works with Alexa and Google Assistant to control of your IR appliances by just saying "Alexa, turn on TV" or “Alexa, volume down on TV".

TV Control in App

No need to program channels on app. Just choose your location and carrier, the built-in channel list is ready for you! Fully compatible with Alexa voice control.

Schedules and Timers

Never miss your favorite football match! Schedule a timer to turn on TV and switch to sports channel - Super easy!

Works with IFTTT

Supports IFTTT to create more fun experiences with other apps and devices. Turn on TV to your favorite channel automatically when Google map detects that you arrive home.

Share Joy with Family

Simply share your device with other family members with limited permissions and let them have fun to enjoy smarter ways of life together.

Preset Scenes

Customize different scenes with one-click option for sleep scene, morning scene, away scene and more.

Temperature & Humidity Detection

Real-time data displayed in BroadLink APP allowed you to check your room temperature and humidity anytime and anywhere.

Download App

Connect your smartphone to your Wi-Fi network (2.4GHz). Download and install the latest “BroadLink” APP, and sign up a BroadLink account.

Add Device

Power up the device and press button until LED indicator intermittently flashing, Tap “add device” and follow the instruction to get the device be connected with your Wi-Fi network.

Add Remote Panel for Appliances

Get into device page and tap “add appliances” to choose a category and a brand. Find the best solution from our library or define your customized remote panel from leaning mode.

Product description

Product Requirements:

The smartphone or tablet able to run iOS 9 or higher; Android 4.4 or higher.



Specifications:

YoLink Hub

Input: 5V DC

Maximum Current: 1A

Working Temperature: -20°C~50°C (-4°F~104°F)

Humidity: 0~90% non-condensing



YoLink Water Leak Sensor

Product Model: YS7903-UC

Voltage: 3V DC (2* AAA battery)

Working Temperature: 0°C~50°C (32°F~122°F)

Working Humidity: ≤100%RH (non-condensing)



Package Content:

1 x YoLink Hub

2 x YoLink Smart Water Leak Sensor

• World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
• Easy and Effective Property Protection: The YoLink wireless Water Sensor could not be easier to install; just place near or under the equipment you wish to monitor. Suggested uses are near or under sump pumps, toilets, water heaters, laundry machines, dishwashers, sinks, fish tanks and any other location subject to water leaks and flooding.
• Early-Warning Notifications: Receive real-time early-warning notifications (in the form of smartphone banner alerts, limited SMS/text messages, and emails) and protect your home and property from water damage; Due to the water-tight and submersible design of the original Water Leak Sensor, an internal sounder/siren would not be heard outside of the water-tight housing. For an audible alarm, consider our Siren Alarm or consider the Water Leak Sensor 2 which has a built-in sounder.
• Plug, Plug & Play! Plug Hub into an outlet, plug Hub into your router, scan in new devices, and enjoy your new system, in minutes! Your Hub is the only device that connects to the Internet, and a wired or WiFi connection is required (wired required for easy & fast Plug, Plug & Play, and most reliable and secure connection). WiFi connection set-up difficulty varies and requires changing settings to your network and/or your phone Changes to your network, passcodes, etc, require changes in the app.
• From Simple to Super-Smart: After setting up your notification preferences, keep it simple and let the YoLink system do the rest and monitor your home and property for you. Or, utilize available advanced automation features, including 3rd-party integration with Alexa and IFTTT, to interact with other YoLink and 3rd-party smart devices. Limited only by your imagination!

User questions & answers

Question:	you have to purchase a separate alarm to have an alarm go off? And you can only have push notifications? how is this supposed alert me while sleeping
Answer:	The replacement part number is 80935. You can purchase it from a Ripley Tools Authorized distributor.
Question:	With ifttt now charging fees, is it necessary to use ifttt to get moisture and temp reports/alarms from the sensors to my phone
Answer:	Taiwan
Question:	Can this be place in a dirt crawl space in the Northeast US where temps go below feeezinf
Answer:	Unless I'm crazy, the 101 is without a spring and the 101-S is with a spring. I believe the model listed is wrong if it doesn't have a spring...
Question:	So if i lose my internet or power (110v). an electrical storm or a smart thief) yolink will stop working with no notifications. is that correct
Answer:	This item is made in Taiwan

Product features

YoLink Smart Water Leak Sensor - Peace of Mind with App Monitor and Notifications

The risk of water damage in a home is high. In fact, it is one of the most common home insurance claims. Every year millions of homeowners suffer billions of dollars in losses. But these losses can be reduced or even avoided altogether with the new YoLink Water Leak Sensor. YoLink Smart Water Leak Sensor alerts you so you can stop the leak before damage to your home occurs.

Water Leak Sensor is widely used in water leak detection. There will have an alert when any of the three sets of probes were under the water. Download YoLink App, add Water Leak Sensor to your smart home system, which will able to monitor your home's security in real-time.

Please Note: YoLink Hub requires a 2.4 GHz Wi-Fi connection or a wired connection.

Super Long Range

Based on LoRa Protocol, YoLink hub reaches a long transmit distance with YoLink Water Leak Sensor of 1,000 feet in the open air, more than 300 feet indoor and efficiently decreased attenuation through physical barriers, reliable communication even under the basement.

Works with Alexa

1, Create routines to trigger the actions of other devices or services

• Get voice announcements from Echo
• Trigger Alexa-enabled devices, like Smart Valve

2, Query the status of the device, for example "Does the water Leak sensor Open?"

Note: Alexa treats the Water Leak Sensor as Open and Close.

Works with IFTTT*

Create applets to trigger the actions of other devices or services

1) get phone calls when there is a water leak detected

2) trigger IFTTT-enabled devices, like Smart Valve

Note: the IFTTT only provides 3 free applets.

Unique YoLink Control

YoLink Control is our unique device to device” control technology. Under YoLink Control, the devices could be controlled without internet or Hub. Pair Water Leak Sensor* with YoLink Gas/Water Valve Controller (sold separately). When there is a water leak detected, turn off the valve contoller automatically.

Note: YoLink Water Leak Sensor needs to update the firmware first

App Monitoring

Real-time water sensor status displayed on the YoLink app

App Alerts

Receive an instant notification on your smartphone when a leak is detected

History Logs

Conveniently check the history of all devices in the ap

Smart Automation

Easily setup scheduled and automatic actions and responses with the YoLink App

Step 1, Download App

1, Download the YoLink App from Apple App Store or Google Play Store

2, Create Account and Login

Requirements:

Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

Step 2, Connect to Internet

Power up the Hub using the supplied power adapter, connect to your Wi-Fi network (or directly to your router, using the included patch cord), and your YoLink Hub will connect to the App.

Step 3, Add Device

Scan the QR Code on the Water Leak Sensor to add it to the YoLink App.

You can customize its name, set its room, and add to/remove from “Favorite”.

Step 4, Activate Device

Press the SET button on your YoLink leak sensor once to connect it to the Cloud, then it will be ready to use!

Place the new wireless smart leak sensor to whenever you want to monitor.

• World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
• Easy and Effective Property Protection: The YoLink wireless Water Sensor could not be easier to install; just place near or under the equipment you wish to monitor. Suggested uses are near or under sump pumps, toilets, water heaters, laundry machines, dishwashers, sinks, fish tanks and any other location subject to water leaks and flooding.
• Early-Warning Notifications: Receive real-time early-warning notifications (in the form of smartphone banner alerts, limited SMS/text messages, and emails) and protect your home and property from water damage; Due to the water-tight and submersible design of the original Water Leak Sensor, an internal sounder/siren would not be heard outside of the water-tight housing. For an audible alarm, consider our Siren Alarm or consider the Water Leak Sensor 2 which has a built-in sounder.
• Low-Power Means Longer Battery Life: Because of the low power consumption, device batteries may last 5 years or more (depending on application and device usage/activity), on standard AAA Alkaline batteries (lithium batteries not required)!
• From Simple to Super-Smart: After setting up your notification preferences, keep it simple and let the YoLink system do the rest and monitor your home and property for you. Or, utilize available advanced automation features, including 3rd-party integration with Alexa and IFTTT, to interact with other YoLink and 3rd-party smart devices. Limited only by your imagination!

User questions & answers

Question:	Is there any monthly or yearly fee to connect to a service
Answer:	It is hard to silence the alarm unless you make a minor modification in advance. Don't wait until the 130 dB siren is going before you work out how to disable the alarm. I've had it blaring in my ears while I frantically try to open the case to disconnect the battery, only to find that opening it is very difficult, even with the aid of a tool such as a flat-head screwdriver. What I've done since is filed down the locking tabs slightly, just enough that the plastic case still locks but is much easier to open when the alarm sounds, so that the battery can be disconnected. Then you can address the water leak in relative peace.
Question:	I don't see any rope sensors which is bad for covering areas like washers, fridge, and water heaters. Any rope solutions I'm unaware of with this
Answer:	The wire has no gauge markings- printed or imprinted. Comparing the wire side by side with a wire stripper, appears to be 18 gauge and it is definitely stranded copper. It is most assuredly no larger than 18 gauge so I would lean towards 18 to 20. I don’t know your application as to why you would need to extend the original length but I can tell you that the device is really loud when activated - if that helps you any.
Question:	How to make with Alexa? Using a routine
Answer:	Hello, thank you for your question. It is a constant, steady high pitch alarm sound. It will keep going until it is removed from water.
Question:	What are the dimensions of the water sensors? (Inches and centimeters
Answer:	Hello, they use 9V battery. Batteries are included.

Product features

YoLink Smart Water Leak Sensor

• Works with Alexa - Receive voice announcements of changes detected by sensors in your home
• Works with IFTTT – Trigger Customer Automations Using IFTTT
• Real Time Status – Check the real-time water/moisture status of the sensor via the YoLink App
• Battery Status – Receive low-battery alerts before batteries need to be replaced
• YoLink Control – Trigger an action by select YoLink devices without reliance on the internet
• Automation – Easily setup scheduled and automatic actions and responses with the YoLink App as well as with 3rd-party integration platforms such as Alexa and IFTTT

Independent System

“YoLink” is a proprietary wireless technology provided by YoSmart. which is based on the Semtech's LoRa wireless technology combined with the YoSmart smart home/buiding protocol, to provide the most advanced smart home/buidling devices solution. Compared to WIFI, Bluetooth, ZigBee, Z-Wave, and other smart home protocols, it has the advantages of low-power consumption, long-distance coverage (wall penetration), and anti-interference. It is the first smart building/home protocol that can be very easily setup and is a very low cost but creates a reliable, robust and more secure IoT network.

No Internet Control

Turn on/off the valve even without internet.

Note: YoLink Valve sold separately!

Whole House Solution

Home Automation - Build "IF THIS THEN THAT" rules between YoLink Water Leak Sensor and YoLink Smart Plug (sold separately) , making life convenient and secure. With YoLink App, you can set smart scenes, automation and YoLink Control between devices and devices, sharing devices with family members and making your house smart. Let's start your own whole house smart home system with YoLink.

5X Long Lasting

Powered by 2*AAA batteries, YoLink Leak Sensor features with 5 years battery life compared to 1 year of other top brands.

Step 1, Download App

1, Download YoLink App from Apple store or Google play

2, Create Account and Login

Requirements:

Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

Step 2, Add Device

Scan the QR code on YoLink Hub and Water Leak Sensors to add into YoLink App.

You can customize their name, set their room, and add to/remove from “Favorite”.

Step 3, Connect to Internet

Power up the Hub using the supplied power adapter, connect to your Wi-Fi network (or directly to your router, using the included patch cord), and your YoLink Hub will connect to the App.

Step 4, Connect to Cloud

Press "Set" button on Water Leak Sensor once to connect it to YoLink Hub and Cloud.

Product description

This add on door sensor works only with 821LMB and MYQ G0301 Smart Garage Hub to monitor and control your second garage door opener. This version of the myQ door sensor is not compatible with the original myQ Garage MYQ-G0201 and 821LM.

• Add the ability to monitor, open and close a second garage door opener with myQ Smart Garage Hub
• The myQ Smart Garage Hub is limited to two garage door openers
• Installation and programming is easy: Mount to inside top panel of garage door and add to your existing myQ account through the myQ app
• Important: This product only works with the new myQ Smart Garage Hub (MYQ-G0301 and 821LMB (sold separately)
• Not compatible with myQ Garage models (MYQ-G0201 and 821LM)

User questions & answers

Question:	Will my existing door openers (car, wall, and outside keypad) still work
Answer:	I followed the size chart
Question:	Is it compatible with amazon alexa/echo, apple homekit
Answer:	I think so! I wear a women’s 9.5-10 and these socks do the trick. I’ve repurchased several times.
Question:	Will this integrate with a Samsung Smart Things hub
Answer:	In my experience, it has been 6 pairs
Question:	Why does chamberlain charge a fee when the other devices are free
Answer:	Just tossed it over 500ft away from the house. Downhill with forest terrain. Worked fine! Nice little gadget since there is no cell signal on the property.

Product features

MyQ Smart Garage Hub Add-on Door Sensor

• Add a second opener to myQ Garage and Smart Garage Hub.
• Monitor and control a second garage door opener.Easy setup.
• Add to your existing myQ account through the myQ app.
• Important : Requires purchase of either the first generation myQ Garage (Models MYQ-G0201 and 821LM) or second generation myQ Smart Garage Hub (Models MYQ-G0301 and 821LMB). Each sold separately. Each Hub can control up to two garage door openers.

Product description

Yovda Smart door & window sensor comes with a 45mah lithium battery for power supply, no need for customers to purchase the battery again, and it can be used for 2500+ times on a single charge. If you have purchased multiple pairs of sensors, you can learn the open or closed status of the door or window of the house from the ``Smart Life'' application (downloaded through the Ios App Store or Google Play Store), and you can set it through the APP to Scene linkage of your Alexa/Google Home/IFTTT and other smart devices

Main Information：

• Lithium Battery: 450mah
• Charging Voltage: DC 5v
• Wireless Connection: Wifi2.4ghz
• Charging Time: 1.5h
• Distance Between Magnet And Sensor: 5~22mm
• Working Hours: 2500+ Times

Main Features：

• Support One-Click Network Distribution
• You Can Connect Through The Mobile Phone App "Smart Life". If An Alarm Is Triggered, The Notification Will Be Pushed To Your Phone Immediately
• Support Intelligent Scene Control And Linkage Scene Setting

How To Install：

• Tear Off The Glue On The Back Of The Main Sensor And Magnetic Components, And Then Paste Them On The Door (Window) And Door Frame (Window Frame) Respectively
• When Installing, Please Align The Mark Of The Sensor With The Mark Of The Magnet
• Avoid Installing Metal Doors On Metal Doors (Metal Doors Will Affect The Sensor'S Sensing Distance And Wireless Communication Distance). When Closing Windows Or Doors, Make Sure That The Distance Between The Sensor And The Magnet Is Between 5 And 22mm

• YOVDA Detector-Yovda Smart Gateway Is The Central Controller Of YOVDA Equipment. If There Is No Yovda Smart Gateway, This Door Sensor Cannot Be Used With YOVDA Applications And Third Parties (Including Alexa And Ifttt). Please Purchase YOVDA Smart Gateway Or Other Smart Gateways That Can Identify The Tuya System For Use.
• Rechargeable Lithium Battery-The Long-Range But Low-Power System Supported By 450mah Lithium Battery Provides Longer Operating Time On The Market. The Remote Coverage Distance Allows It To Be Used In Most Residential Wi-Fi Systems, Such As Basements, Outdoor Porch/Terrace Areas, Sheds, And Free-Standing Garages.
• Simple Operation-After Setting The Notification Preferences In Smart Life, Let YOVDA Smart Gateway Perform The Remaining Operations And Monitor The House And Property For You. You Can Also Use The Available Advanced Automation Functions (Including Third-Party Devices With Alexa And IFTTT) Interact Smart Scenes With Other YOVDA And Third-Party Smart Devices! Can Be Combined With Any Software Functions!
• Low Power Consumption Performance-Means Longer Battery Life-Due To Low Power Consumption, The Device Battery Can Use Lithium Batteries, Which Can Be Used For 2500+ Times Or More On A Single Charge (Depending On The Application And Device Usage/Activity)
• Alarm Notification Function-Use Smart Phone Banners To Receive Real-Time Warning Notifications With Limited Mobile Messages, Which Can Be Configured And Configured In The APP As Needed; But Please Note: YOVDA Access Control Sensor Itself Does Not Emit Alarms Or Prompts, It Will Only Send Notice. For Multiple Scene Notifications Of Sound Alarms Or Light Warning Lights, You Need To Use Sound Alarms Or Smart Smart Bulbs To Complete!

User questions & answers

Question:	Can I only set up via iPhone
Answer:	Insteon hub sends a notification to any device you choose. You can set that device, such as a phone, to audibly respond. I use mine to track my house in Delaware when I am in South Carolina
Question:	Does opening the door make a sound
Answer:	Theres 4 pockets two are inside two are outside on the sides, inside there are slot pockets as well. And there's one extra laptop pocket in the back
Question:	How far away can the contact sensor be away from the homekit hub and still work
Answer:	No
Question:	Can this be installed on an outdoor gate? Or is it indoor use only
Answer:	Easily, and then some

Product description

BroadLink IR RF Universal Remote integrates control of your home appliances in one easy-to-use app "BroadLink". With Alexa or Google Assistant, it gives you hands-free voice control of your devices, like turning on/off your TV or turning up/down the volume via voice command.

• All-in-One IR/RF REMOTE CONTROLLER -- BroadLink RM4pro supports not only IR home entertainment devices but also RF433 & 315MHz dual RF band, such as TV, STB, Air conditioner, ceiling fan, fireplace, electric blinds/shades. Integrate all your remote controller into one easy-to-use BroadLink App.
• VOICE CONTROL - Works with Alexa/google home/IFTTT. Simple setup with Alexa or Google Home speaker, enable BroadLink skill/service, link account and discover devices. It gives you hands-free voice control of your devices, like turning on/off your TV or turning up/down the volume via voice command. More home automatons can be also set with IFTTT and Siri shortcut.
• TEMPERATURE AND HUMIDITY SENSOR - BroaLink RM4pro will come with a USB sensor cable, which can real-time detect Temperature and Humidity of the room where the device located. Those data will allow you to setup routines in the BroadLink App, such as turn on humidifier automatically if the humidity is low. (Note: at present, Alexa hasn’t supported Humidity; Alexa and Google home haven’t supported humidity and temperature routines yet, you can set routines in the BroadLink App).
• MORE FEATURES - Create multiple timers, scenes and routines. Voice control and BroadLink App remote control. Supports RF315MHz (range: 305~335MHz) and 433MHz (range: 430~440MHz), fixed code, not rolling code.
• BUILD YOUR SMART LIFE WITH BROADLINK –BroadLink is constantly focusing on electrical gadgets, lighting control and universal remote solutions, provides various accessories to build your ideal smart life. Global 24/5 call center support from 6 regions. NOTE: the device require a secured 2.4GHz Wi-Fi networks.

User questions & answers

Question:	Does this have HomeKit support
Answer:	Integration with Amazon Echo requires Insteon Hub (2245-222).http://www.insteon.com/support-knowledgebase/2015/9/10/supported-insteon-devices-with-amazon-echoPer the list at that url,Dimmer In-Line Module SupportedOn/Off In-Line Module Supported
Question:	Will this work with a proflame fireplace remote control? bond did not... i fear the same issue with this. might be a rolling code
Answer:	This in-line dimmer is rated for 400 watts and your plan to control 360 watts is very close to the limit. If you are only interested in On/off function without dimmer function, the 2475SDB module is a better choice.
Question:	Does this take input from an IR remote
Answer:	You need an additional remote. Any of the compatible Insteon keypadsthat plug into the wall or wire into an outlet.
Question:	will this work witb samsung model no: un502j5200af model code:un502j5200afxza version: jd
Answer:	I don’t know since I don’t work for them but have noticed that they vary their prices greatly at different times. You might be comparing prices that didn’t actually coincide. They also make mistakes, like discounting a$199 item by 20 cents instead of 20 dollars

Product description

The Philips Hue Outdoor Motion Sensor automatically turns on the Philips Hue Smart Lights you want, both outdoor and indoor.The sensor detects variations in infrared radiation in its environment, allowing it to detect human movement and automatically turn on the lights (sensor motion sensitivity can be adjusted in the app). By connecting the motion sensor to your Hue hub via the Philips Hue app, you can choose which of your Philips Hue lights go on, both inside and outside your house. Also choose the scene or light setting that should be triggered. The integrated dusk-to-dawn sensor ensures your lights only switch on when it is actually dark outside helping you to conserve energy. This Philips Hue outdoor sensor is specially designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions.​ 160 degree horizontal/80 degree verticle view angle with 39 ft x 8 ft detection radius. Optimized for far range and close proximity (antering and leaving home). Able to fix the motion sensor on both a flat wall and corner.

• ENHANCE YOUR SMART HOME EXPERIENCE: The Philips Hue Outdoor Motion Sensor detects outdoor motion and can trigger both Philips Hue Indoor and Outdoor lights. Set your Hue sensor to welcome you or guests home with lights, or detect intruders or potential package thieves with pre-set light scenes, Philips Hue Hub and Hue Smart lights required and sold separately, Works with Apple HomeKit
• MAXIMUM SECURITY: Scare away potential package thieves or intruders, Thanks to the large view angle and detection range the outdoor sensor will spot any movement near your smart home, It can directly turn on your outdoor lights to expose intruders while turning on indoor Hue smart bulbs so it looks like you're home, even when you're not
• EXTREME RESISTENCE: Resistant to all weather conditions, this Philips Hue outdoor sensor is designed for use in outdoor environments and has undergone rigorous tests to ensure its performance. Certified by UL, the product will withstand heavy rainfall and other weather conditions,
• EASY INSTALLATION: Installed in a matter of minutes, the outdoor motion sensor is easy to mount and is fully wireless. You don’t need an electrician to have it installed. Just unpack the sensor, set it up through the Philips Hue app and install it wherever you like. Configuring the outdoor sensor and setting the daylight and motion sensitivity is also done via the Philips Hue app
• LIMITLESS POSSIBILITIES: Place the Philips Hue Outdoor Motion Sensor where you want. The kit comes equipped with different mounting components. You can mount it on a flat wall, on the inner or outer corner of a wall or post, or on a pole or rain pipe. It's perfect for front yard lighting, deck lighting, porch lighting, around the door, garage or any place around your smart home where it matters. One lens to see it all: The lens of the outdoor sensor is custom designed to detect movement directly below the sensor – for example when you step out of the door or are at a longer distance it detects you. When closely examining the lens you can see how the lens pattern changes to detect movement at close range and the upper part at long range
• UNLOCK HUE'S FULL POTENTIAL: For the full set of smart light features, add a Hue Hub (sold separately) to your smart lights to experience the full set of Philips Hue features. With a Hue Hub, you can control up to 50 smart lights throughout your home (even outdoor!). Create timers and routines to automate your entire smart home lighting setup; use your lights to wake up and go to sleep; or make it look like you're home when you're on vacation using presence mimicking features. Control your lights while away from home or add accessories such as motion sensors and smart switches to further enhance your experience. The possibilities are yours to unlock when you add the Hue Hub (sold separately)

User questions & answers

Question:	Do you have hard wired version? Normally the sensor is mounted somewhere out of reach. Why would anyone wants to change battery periodically
Answer:	No one WANTS to change a battery periodically but if there is no available outlet, it’s better than nothing. And every couple of years is no big deal. (Plus it looks much better if there is no electrical cord running down the side of your house.)
Question:	Can I use this to trigger other smart outlets
Answer:	Short answer: Yes Long answer: It depends. I don’t know how home automation works with android, but Phillips Hue is Apple HomeKit compatible. The sensor shows up as 3 sensors in the Apple Home app, motion sensor, light/lux sensor, and temperature sensor. You can create automation rules in Apple Home that can control any HomeKit compatible outlet. I don’t know if Phillips Hue has released any smart outlets (pretty sure they just do lighting), but if so then you could probably create a routine for it in the Hue app. Note: If you’re new to HomeKit, you should be aware that Apple HomeKit automation only works when you have an Apple device acting as a home automation hub. This can either be an AppleTV or iPad (that stays at home). If all you have is an iPhone, it either won’t work at all, or if it does it will only work when your iPhone is connected to your home WiFi.
Question:	How long will the battery last
Answer:	About 2-3 years
Question:	Any way to keep the floodlights on (at a dim level) and they get brighter when detecting motion. AND off altogether if it's daylight
Answer:	Glad to see there's finally a work around for this. I previously had an app (I can't remember the name) that allowed you to create logic linked to any smart platform... and also use things like the Nest Doorbell... so I had it set to: Hue came on sunset at 10% dim. If Nest detects person, set Hue outdoor lights to 100% Brightness for 30sec., then activate scene 10% dim. It worked great, but the people who developed that app discontinued it. It worked for a while afterward too but then one day just stopped. I'm so glad to see I can do this again!!! (since you can buy "dumb" lights that do this on their own with 2 level dusk dawn motion sensors)

• Application: Compatible for 1999-2000 CADILLAC ESCALADE Fits Old Body Style ONLY, Compatible for 1995-2000 CHEVROLET TAHOE Fits Old Body Style ONLY, Compatible for 1995 CHEVROLET K2500 SUBURBAN , Compatible for 1995 CHEVROLET K2500 , Compatible for 1995-1999 CHEVROLET K1500 SUBURBAN , Compatible for 1995-1999 CHEVROLET K1500 , Compatible for 1995-2000 GMC YUKON Fits Old Body Style ONLY, Compatible for 1995 GMC K2500 SUBURBAN , Compatible for 1995 GMC K2500
• OE Part Number: 515024,715024,SP550307,550301,550307,SP550300,BR930346,WB15024
• Direct replacement; Built to strict quality control standards
• Verify this part fits your vehicle using the compatibility chart,
• please check your car information through Amzon's FITMENT.

Product features

Additional Information

1 Piece Wheel Hub & Bearing Assembly

Lug

6 Lug Wheel

Replaces oem part numbers

515024,715024,SP550307,550301,550307,SP550300,BR930346,WB15024

Easy installation

Assembling has excellent performance, precise overall structure, easy to install.

ABS sensor integration

Wheel bearing assembly with ABS sensor integration.

High wear resistance

The wheel hub has high wear resistance and high rigidity, rust resistance.

Reduce noise

Stability of the material effectively reduce noise, smooth running

How to install the wheel hub

1, The bearing should be installed in a clean and tidy environment. The condition of the bearing housing should also be checked before installation.

2, The specifications of the nut used for the wheel hub installation must be the same as the original vehicle.

3, First use the conventional cross wrench to tighten, and use the torque wrench to tighten according to the corresponding torque value. (Torque value refer to manufacturer’s specifications)

4, After the wheel hub is installed, turn the steering wheel to the maximum direction left and right to confirm that the tire does not touch any part of the car body.

• 🔔[Smart security system] Via Smart Life app, it can be easily controlled by arming, disarming, and home modes with also a simple remote control. In the event of an emergency, you can also seek help by pressing the “SOS” button to send a help signal.
• 🔔[APP Control] When important entry areas such as windows/doors are opened, or when motion is detected, get a instant push alerts on your phone and an alarm will issue a 90dB alert. The main controller hub is responsible for connecting with all of the sensors.
• 🔔[Work with Alexa] Support gateway to arm/disarm/home mode by simple voice command via Alexa. The full alarm kits can work with Alexa and Google home, you can create the smart scenes with kit alarm, like alarm triggle, active other wifi products or other smart products in “ Smart Life “APP, like wifi bulbs , as kind of function: alarm triggle, the wifi bulbs lighting.
• 🔔[Built-in siren] Built-in siren, support expansion of up to 30 sensors and 10 remote controls paired with one wifi hub. If it loses power, it has backup battery to support 8 hours working. It can support rename different zone name, sensors name, and zone property name.
• 🔔[What You Get ] WiFi Alarm System kits : 1 *WIFI+RF868 Hub(with siren inside),4 * RF868 Door Sensor,1*RF868 PIR Motion Sensor,1*RF868 Remote Control.

User questions & answers

Question:	cuando una puerta o ventana es abierta inmediatamente me envia la informacion a mi aplicacion en tiempo real
Answer:	yes
Question:	How does it work with Alexa and Google Home
Answer:	You can connect the google assitant from third-party control of the APP. And connect the ALexa via "Skill" on alexa app. You can find out the listing instruction on Technical Specification, User Manual with all the details, Application Guide for Alexa connection, Installation Manual for google home.
Question:	Funciona en Uruguay
Answer:	YES,this wifi alarm system can work in Uruguay
Question:	Can i arm/disarm all sensors form the app? or i have to use the remote
Answer:	Yes, after connected the hub with 2.4g wifi, you can arm/disarm the sensors, set up a schedual or others in "Smart life" APP. You can arm/disarm the sensors by APP or remote controller.

Product features

AWOW WiFi Security System 7 kits

[Door/Window Sensor and PIR] Put whole-home security at your fingertips by Door sensors and PIR motion sensor.

[APP Control] After adding the door alarm sensor and PIR and Remote control in “Smart Life” App, you can simply slide a button in App to turn on/off multiple sensors.

[Voice Control Works with Alexa] Support hub to arm/disarm/home mode by simple voice command via Alexa.

[Easy to Use] Easily setup door sensor in minutes—without tools or professional installation.

[Only Suppot 2.4G WIFI] Wifi gateway can only connect to a 2.4GHz,but can not support 5GHz network.

[What You Get] 1 *WIFI+RF868 Hub(with siren inside),4 * RF868 Door Sensor,1*RF868 PIR Motion Sensor,1*RF868 Remote Control(7 kits)

Reliable system Built-in siren

When the windows/doors are opened, or when motion is detected, the hub/gateway will send an alarm, the sounds up to 90 dB, but it can volume down.

With backup battery support it will work around about 8 hours if it loses power.

DIY installation

Set up your entire system without the need for tools or professional installing, and expand your alarm to fit any home , apartment or office. No contracts and no subscription fee.

You could share the device to your family members or set it up on "My home".

Voice Control Work with Alexa

Voice control works with Alexa/Google Assistant. You can simply turn on/off arm via voice commands. Like (Alexa, arm/disarm - the different device name you set).You can create a smart scenes, like alarm triggle, active other smart products in “ Smart Life “APP.

PIR Motion Sensor

Through the induction of infrared rays, the PIR Motion Sensor can sense the moving object and give an alarm. The sensing width is about 110°. It has high sensitivity and anti HF interference function, and can effectively trigger the alarm, to not miss any burglar. Tips: Recommend installation height is 1.8-2.2m.

Remote controller

The home smart alarm system can be easily controlled by arming, disarming and home modes with remote controller. In the event of an emergency, you can also seek help by pressing the “SOS” button, it will send a 90dB alert. Supports Expansion of up to 30pcs sensors and 10 pcs remote control.

Door/Window sensor

The working siren will be triggered once a door/window opens. When a window/door opened, a high-pitched alarm is immediately issued and APP will give notification. The door/window sensor’s main unit and the magnetic strip are respectively installed on the door/window and the door/window frame.

Free Mobile notification

Wi-Fi connection works on 2. 4GHz bandwidth. (Does NOT support 5GHz networks) with a free IOS/Android smart-phone app, Whenever any sensor is triggered, your phone will receive an alert notification.

You can add up to an unlimited amount of members whom you trust to control this smart alarm system.

How to Connect to Wi-Fi?

1. Connect the smart phone to 2.4G Wi-Fi (5G is not supported);

2. Open Smart Life, tap “+Add” icon at the bottom;

3. Add PIR motion detection, door sensor and remote control, then you can control it with APP and remote control.

What you get(7 kits)

1* WiFi Main Siren(WiFi Gateway)

1* 868mhz PIR Motion Sensor

4* 868mhz Door Sensors

1* 868mhz Remote Control

1* English user manual

Product description

Cautions: All the Aqara products sold by Aqara Direct are the official models of US version. Products purchased from unauthorized sellers are NOT eligible for and replacement by Aqara.

• NOTES: Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. One Aqara Hub can connect up to 32 Aqara devices.
• REMOTE MONITORING: When the room temperature reaches above or below a certain threshold, the Aqara Temperature and Humidity Sensor can send a push alert to your phone or trigger the Aqara Hub night light.
• HOME AUTOMATION: The Aqara Temperature and Humidity Sensor can control other connected devices such as Aqara Smart Plug to ensure that your fan or humidifier maintains a constant level of comfort for you and your family.
• ACCURATE MEASUREMENT: Utilizes high-quality sensor from the industry-leading manufacturer, Sensirion.
• BUILT-IN AIR PRESSURE SENSOR: Monitors the ambient air pressure in the room.

User questions & answers

Question:	Can an apple tv be used as a hub instead of an aqara hub? if not, this is disappointing and i'll keep looking for a better cost-effective solution
Answer:	Our sensors need to be paired with the Aqara Hub. Once paired, you can then use them in Homekit.
Question:	Can these be used in an enclosure with a misting system? Or would water seep in
Answer:	It would not be recommended to use it in an enclosure with a misting system. The Aqara Temperature and Humidity Sensor is an indoor device that works at - 20 ~ 60 ℃ and 0-100% of relative humidity with no condensation. Do not install the sensor in the refrigerator, kitchen or bathroom. Do not expose the sensor to rain and vapor.
Question:	Could I use this in a refrigerator
Answer:	The Aqara Temperature and Humidity Sensor is suitable for indoor use. We do not recommend using the sensor in the refrigerator. Normal operating temperature:-20 to 50°C (-4 to122°F); humidity: 0~100%, non-condensing environment. Do not expose the sensor to rain or vapor. Do not install the sensor in the refrigerator, kitchen or bathroom.
Question:	Does it work in smart life app
Answer:	Sorry, it does not work with the Smart Life app. We make no claims of compatibility with any eco-systems other than Aqara Home, Apple Homekit, Google Home, Alexa, and Mi Home.

Product features

Aqara Temperature and Humidity Sensor

Whenever the temperature reaches above or below a certain threshold, the sensor will send an alert to your phone and automatically turn on/off the humidifier or fan via the Aqara Smart Plug.

Communications between Aqara Hub and Aqara devices can reach up to 20 m (65 feet) under normal conditions. It depending on terrain and building structure. Aqara Smart Plug and Aqara Smart Wall Switch(With Neutral) can also be used as a signal repeater to extend signal coverage.

Easy Setup and Maintenance

Most Aqara devices require no wiring and screws. With the Aqara App and its easy-to-follow instructions, you can set up your smart home in no time. Aqara devices are also made to consume very little energy, and most Aqara products can last over 2 years without changing batteries.

Peace of Mind

Aqara can always provide you with the comfort of knowing what’s happening at home while you’re away. With a wide range of sensors, Aqara can trigger the alarm sound or send you an alert notification when unexpected entry, movement, temperature change, or water leak is detected.

Remote Control and Automation

Aqara provides you with countless ways to control your smart home, whether it be through your phone, wireless switches, or voice commands via 3rd party voice assistants. Set different automations and scenes to control your electronic devices based on the time of day or your personal preference. Your house will always be at your command no matter where you are.

Compatible with Most Voice Assistants

Aqara Hub is designed as high-compatibility smart home control center. Aqara devices into Apple HomeKit and Xiaomi Mi Home to work with other compatible devices for alarm systems, home automation, and voice commands. For example, you can set an “Away Mode” and activate the scene using your voice.

Download Aqara Home app

Can the Aqara Temperature and Humidity Sensor be connected to the mobile phone directly?

The Aqara Temperature and Humidity Sensor cannot be connected to the mobile phone directly.

An Aqara Hub is required, please connect the Aqara Hub with the mobile phone, and then connect the Aqara Temperature and Humidity Sensor to the hub.

What if I could not connect the Aqara Temperature and Humidity Sensor to the app?

1. Check to see if the hub's firmware version is up to date.

2. Check if the hub is already in the pairing mode.

3. Check if the sensor is reset successfully, and the LED indicator is blinking as expected.

4. Keep the sensor as close as possible to the hub and keep trying.

5. Try with another child device to see if there is something wrong with the sensor itself.

6. Try with another hub and see if there is something wrong with the previous hub.

7. Please be aware that we can add no more than 32 child devices to a hub at the same time.