12 best install attic ladders

Product description

WERNER LADDER AA1510 AA1510 LADDER Aluminum ATTIC 250LB is rated for 250 pound load capacity; lightweight and easy to open and close with the included assist pole; installs into small openings for access to untapped storage space; ideal for hallways, closets and other tight spaces; non-marring feet; telescoping design gives you quick, hassle-free access to small attic openings anywhere or anytime; hardware for door included (door not included).

• Lightweight and easy to open and close
• Includes assist pole
• Installs into small openings
• Non-marring feet
• Ideal for hallways, closets and other tight spaces
• Floor to Ceiling Height Range

User questions & answers

Question:	When are you bringing back the telescopic ladder? This “compact” style doesn’t work if you do t have a lot of empty space inside your attic
Answer:	I've purchased a 32 oz and a gallon. I think I reviewed the 32oz.
Question:	Is it attached to the door
Answer:	The Alba website shows no parabens in the ingredients for this product. I believe the ingredients list on this Amazon listing is a misprint and should be corrected. If you’re in doubt, check the website or your local store (I think Target carries it) to verify the ingredients. Worst case, if you order this and it shows parabens on the product, just send it back and request a refund because it’s not the product you ordered if you ordered something without parabens.
Question:	what ladder is suitable for vertical position
Answer:	Smells horrid, like acrid oil paint. I can't use it and I usually like natural lotions, but the scent of this is unbearably strong and pungent.
Question:	I have a 30x30 rough opening and a 8' ceiling. Will this ladder work? Also, what is the quality of the ladder
Answer:	It smells but I wouldn’t say it’s a scent. Just lotion smell. It’s not strong but if you are sensitive it might bother you

Product description

Versa Lift Attic Ladder Safety Railing - Entering and Exiting your existing attic via an attic ladder can be very dangerous. A Versarail is a great addition to a Versalift Attic Lift.

Avoid slips and falls with a safety rail designed to go around your attic ladder opening. The Versa Lift Attic Ladder Safety Railing acts as a solid safety stabilizer.

The Versa Rail is adjustable to fit most attic ladder openings. It telescopes down to a minimum width of 22 1/2" out to 30" or the length can be adjusted down to 54" out to 60".

This sturdy hand rail makes entry and exit to the attic safer and more convenient. Made of durable steel and easy to install, this great product will help to avoid someone from accidentally stepping over the opening of an attic ladder in down position. br>

• Easy to Install, Fits Most Attic Ladder Openings!
• Makes Entry and Exit Safer When Climbing Attic Ladders!
• Comes Complete with Hardware and Easy to Install Instructions!
• Attic Ladder Accidents Can be Avoided with Safety Measures!
• Solid Steel Construction and Adjustable for Most Attic Ladder Openings!

User questions & answers

Question:	My opening is 30 1/2" Is there enough room in the flange to fit
Answer:	Yes it will
Question:	What is the difference between this and the $215 VR60 on another entry? It is the same vendor and looks like the same product
Answer:	The fuel source is inconsequential. This is an additive for the water, so yes it will work. It is basically a replacement for an anode rod ( prevents sludge and rust in the water)
Question:	Will the owens corning attic stair insulating tent fit with this railing
Answer:	I used the whole gallon in our Central Boiler, which is a good sized one, I would call your Woodboiler company and ask them.
Question:	Is this OSHA approved
Answer:	It may increase conductivity tho, depending on whether it has the right additives for that. HeatMaster requires the correct treatment for any warranty.

Product description

Insulates & Air Seals Attic Staircase

Reflects 95% of Radiant Heat

High R-value

Lower Front Opening for Easy Access

Easy Zipper Access To Attic

Installs in Minutes

• Extra Thick Attic Cover: Designed for optimal energy efficiency. Prevents air, dust or pollutants leakage into your home during the entire year, no matter hot summers and cold winters.
• Class A Fire Resistance Material: R-Value of 15.3, reflects 97% of radiant heat.
• Dimensions: Fits openings up to 25" x 54" x 11". Weights only 1,80 pounds
• Easy/quick Installation and Easy zipper access: Installs in minutes. Installation Sheet inside the package. Durable and high quality zippers allows easy access to and from the attic without struggle.

User questions & answers

Question:	Where i can find different measurements like 51x
Answer:	No. If u just need a ladder find a local woodworker and have him build u one
Question:	Could this fit a 25.5 in x 54 in. opening
Answer:	The 22 x 47 and the 22 x 54 sizes will fit into a 22 inch wide rough opening.
Question:	Is r 15.3 enough insulation for an attic in the northeast (ct
Answer:	The ladder comes with everything you see in the picture. So yes the ladder is included as well as a red handrail. The plastic ladder ends can be purchased separately.
Question:	Can this product;s height be shortened in any way? Not the linear size, but the height when installed. It sticks up too high. I do not want to cut it
Answer:	I have a 9 foot high ceiling and I had to cut off about two feet of the bottom of the ladder, so all you will have to do is trim down the required length to fit your 7 foot ceiling. should be a snap. Good luck.

Product description

This 25" x 54" x 11" insulating stair cover is a piece of the puzzle of weatherizing your home. It slows air transfer from your attic to your home, and stops insulation from falling into your home when the attic is accessed. Fits most openings up to 25"x54". We manufacturer this cover a few inches larger than needed to accommodate building tolerances. If your opening is too small, simply fold the edge over and staple for an airtight seal. Easy access to your attic with a zipper. Easy to install, all you need is a staple gun. You can use caulk around the edges for an extra seal if you like, but its not necessary. Fits most openings up to 25"x54". We manufacturer this cover a few inches larger than needed to accommodate building tolerances. If your opening is too small, simply fold the edge over and staple for an airtight seal.

• See immediate energy savings
• Fits 25" x 54" openings
• Provides an R-Value of 14.5
• Puts a stop to insulation falling down when attic is accessed
• Simple one person install

User questions & answers

Question:	Does the zipper go fully to the end of the unit (54 inches) or does it only go to the halfway point (27 inches)? Pictures only show it half way open
Answer:	Four years/We buy a case and use one every year & its worked.
Question:	So it comes with steps
Answer:	I'm not a 100% sure, being 13 years old I can't see them changing it should be the same one they use in all the boilers. Just a word to the wise the last solenoid I bought from this consumer it failed open and just about blew my boiler up. Amazon helped me get my replacement for free, but the company that sold it to amazon denied it. I should of sued them for scaring the Hell out of me and just about destroying boiler.
Question:	how do you access the attic
Answer:	Guarantee that it works upon arrival.
Question:	My attic entrance has a box that is 25 1/2 x 54 (outside dimensions) x 4 over the opening. Will this item fit? Thank You
Answer:	I stock this item...and sell on another site eb

Product description

Enjoy safe access to your attic space with this FAKRO LWP wooden insulated attic ladder (model 66803), which fits into rough openings measuring 22 x 54 inches and is designed for ceiling heights between 7 feet, 10 inches and 10 feet, 1 inch. Satisfying all technical and safety requirements, FAKRO folding attic ladders maximize ease of use and comfort without the need for installing costly and space consuming staircases. The quick fixing system allows the ladder to be easily installed by two people, and also permits easy ladders height adjustment. This insulated ladder features thick rubber gasket insulation between the boards that provides an R-Value of 5.9 to protect against heat loss.

The ladder and box frame are constructed of high-quality pine, and the hatch's unique opening mechanism ensures the ladder opens slowly. Once fully open, the mechanism will hold the hatch in position to prevent it from slamming shut.

The ladder comes in three sections, and the ladder steps feature grooves cut into the step surface to prevent accidental slippage. This ladder has a maximum user weight of 300 pounds, and an optional red metal handrail can be installed on either side of the ladder to increase safety and comfort. An opening rod is included. It's backed by a two-year warranty.

• Easy-to-install insulated wooden attic ladder for 22 x 54-inch rough openings
• Adjustable to fit ceiling heights between 7 feet, 10 inches and 10 feet, 1 inch
• Insulated wooden door frame helps to reduce energy cost (R-Value of 5.9)
• Well balanced door opens and closes easily with no sudden movements
• Maximum user weight of 300 pounds; backed by 2-year warranty

User questions & answers

Question:	Can you buy the ladder by itself
Answer:	I believe so. I measured my width. There are adjustment holes to make the width adjustable. If your width is not already drilled for, it would be easy to drill new holes to accommodate your width of opening. You will love this product. It is a little pricey, but it is sturdy. It has kept me from stepping into the opening several times. If you compare the cost of falling (hospital, etc.) this is a very cheap cost in my opinion.
Question:	Will this ladder fit into a 22 inch opening
Answer:	Same Product
Question:	Does thsi product come with the ladder/stairs
Answer:	Yes, the VersaRail is adjustable and should fit outside the tent. The tent is 25 1/2" x 54". The rail can be adjusted out to 30" x 60"
Question:	My ceiling is 7 feet high. Can I make it work
Answer:	Not OSHA approved Off the top of my head... The railing must be 42 inches at the top rail. Must have a Midrail and toe rail. Also needs to support a minimum of 200 lbs or more.

Product description

Have your utility bills been going through the roof?

Protect yourself with an effective heat management solution by easily installing our Attic Stair Cover Insulation

• DOUBLE AIR-BUBBLE INNER LINING: Gives a thickness of 6mm of heat reflecting material to bounce off the heat radiating from either side (Winter or Summer months).
• EXTREME R-VALUE INSULATION: Delay conductive heat movement by resisting heat flow to transfer through your attic opening by using our multi-layer insulation. 
• REFLECTIVE FILM OUTER LAYERING: The durable aluminum layers create a water, humidity and moisture-resistant barrier allowing you to breathe and live more comfortably in extreme outer weather conditions.
• FEEL THE DIFFERENCE IMMEDIATELY: Experiencing hot or cold air rushing through the attic opening? After installing the insulation properly that will stop instantaneously

 

Lightweight Material

Easy to handle and install with a staple gun (staple gun not included)

Sewn seams for added strength and longevity

Easy to use zipper for quick access to and from the attic

• ATTIC COVER with EXTRA THICKNESS: The highest quality wall thickness in the market will protect your house from air leaks during the summer and winter months and reduce your bills drastically
• DIMENSIONS FOR: 25" x 54" x 11" attic hatch opening. This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden in the attic.
• ATTIC INSULATION EASY ZIPPER: Allows easy entrance and exit to the attic when climbing up and down your pull down attic stairs.
• DIPPING ENTRANCE: Our custom insulator was created with a shallow entrance point that will allow your climb up and down to be safe and easy.
• At Miloo we are committed to producing quality products that we know you will love. If for any reason you are not completely satisfied, contact us so that we can be of assistance.

User questions & answers

Question:	What is the R value
Answer:	My product zipper also broke. In the process of contacting the seller now.
Question:	What is the actual officially stated R-value
Answer:	The maximum safety height of this kind ladder is 9.2ft/2.8m. And the maximum vertical height of the other style is 9.8ft/3M, asin is B07SSY5ZSS. Sorry to tell you we don't have 10.5 feet ladder. Regards
Question:	R-value says r-value 15.3 but below q&a says 5 can anyone confirm this
Answer:	Yes, it included. After installation this two separate steps, the maximum vertical height is 9.2ft/2.8m . And this is the maximum safety height. Regards
Question:	How does it secure to the inside of the opening? Will I need a staple gun
Answer:	Total width: 54cm/21.3in. Size of steps: 40 x 14 cm/ 15.7 x 5.5 in. Best regards

Product description

This Louisville elite series aluminum attic ladder has a working load capability of 375 pounds. This aluminum attic ladder fits ceiling heights of 7-Foot 8-inches to 10-foot 3-inches and has a Rough opening of 22.5-Inches x 54-inches. The elite AA2210 attic ladder features slip resistant cross-tread steps, adjustable shoes, an advanced cylinder design, and an ergonomic T-handle. The Louisville AA2210 aluminum attic ladder meets or exceeds the safety standards set by ansi.

From the Manufacturer

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model AA2210 number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily. It utilizes a gas cylinder instead of a traditional spring mechanism. The gas cylinders provide more clearance space allowing easy transport of large boxes. The gas cylinders allow the smooth opening and closing of the door, reducing the force needed with traditional spring operated attic doors. The gas cylinder design also eliminates destructive door slamming. This Louisville attic ladder features 3-1/4 inch deep steps to increase stability. The adjustable shoes on the Louisville attic ladder make it easy to fit with any type of flooring.

• ROUGH OPENING DIMENSIONS: 22-1/2 x 54-inches
• CEILING HEIGHT: Fits 7-foot 8-inches to 10-foot 3-inches ceilings. Step Depth : 3.25 inches.Rail Size : 3.125 inch
• STURDY AND SAFE: Able to hold up to 375 pounds, with reinforced, grooved steps to provide maximum traction. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb
• CUSTOMIZABLE ELEGANCE: Elegant and smooth finish with adjustable spring tension; Ceiling Height Maximum (ft): 10.25

User questions & answers

Question:	Do you have installation available for this item? Atticc ladder
Answer:	Yes it does
Question:	I have an attic ladder I want replaced that the outside frame measures 24 3/4" x 53 1/8". Would this ladder be the right size with shims
Answer:	It's made from China.
Question:	I have 22" wide, so mine is not as 'standard' as I thought. Neither would work then for me
Answer:	Yeah, it can be unfolded into straight 16feet telescoping ladder.
Question:	I ned a ladder that is art least 11 feet, which one should I get
Answer:	The height depends on angle of A shape, but most height is 250cm, about 8.3ft

Product features

Step 1 Measure the rough opening must be 54" by 22.5"

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

TOOLS NEEDED:

Step ladder, hammer, Phillips screw driver, Framing square, drill with 1/8" bit, 2 ea 7/16" wrenches, 2 ea 1" x 4" x 32" boards, Wood shims, Tape Measure

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 7'8" and 10'3" this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 74-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet 3-Inches, you will need 67-inches of landing space. This is the maximum amount of space needed.

Louisville Ladder Elite Aluminum Attic Ladder 375 Pound Capacity

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily.This Louisville attic ladder features 3-1/4 inch deep steps to increase stability.

Product description

Louisville Ladder premium wooden attic ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville premium attic ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal ez-hang straps for quick and simple installation. Because each ladder meets the standards set by the ansi and OSHA, you can feel reassured knowing your Louisville Ladder is safe for your whole family to use.

Louisville Ladder Premium Wooden Attic Ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville Premium Attic Ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal EZ-hang straps for quick and simple installation. Because each ladder meets the standards set by the ANSI and OSHA, you can feel reassured knowing your Louisville ladder is safe for your whole family to use.

Offers Greater Access to Attic and Storage Areas

With the Louisville Ladder Premium Wooden Attic Ladder, you can gain unobstructed access to attics and other ceiling compartments. Able to be used in tight spots, this ladder unfolds to provide a compact and sturdy way for you to reach high-up storage areas. Not only does this ladder save you space, but it also saves you money on building expensive staircases. The Louisville Premium Attic Ladder folds and unfolds quietly. When you're ready to use it, simply tug on the ergonomic T-Handle that's designed to give you a secure grip for easy opening.

Built for Strength and Safety

Each Premium Wooden Attic Ladder is built to withstand 250 pounds of pressure (person included), and features grooved steps to provide maximum traction as you move up and down. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. A "full grip" hand rail gives you added security as you hold a box in one hand and grip the ladder in the other.

The Louisville Premium Attic Ladder meets safety standards set by the American National Standards Institute and the Occupational Safety and Health Administration.

Designed for Easy Installation and a Proper Fit

This premium ladder features metal E-Z hang support straps to help you install it quickly and safely. Easy-to-follow instructions show you how to fit the ladder to the proper dimensions of your ceiling and floor, creating a sturdier base when opened and a perfect fit when closed.

What's in the Box

One Louisville Ladder Premium Wooden Attic Ladder.

From the Manufacturer

Louisville Ladder 10-Feet, Wood Attic Ladder Type I, Working Load Limit 250 LB, 22.5-Inch by 54-Inch by 8-Feet 9-Inch - 10-Feet, Perfect for Any Attic Space, In The House, Garage, Anywhere, Easy To Pull Down and Raise Up.

• Rough opening dimensions: 22.5-By-60-inches
• Ceiling height: fits 8-foot 9-inches to 10-foot high ceilings. Rail Size - 0.75 x 3.375 inches
• Sturdy and safe: able to hold up to 250 pounds, with reinforced, grooved steps to provide maximum traction
• Superior stability: heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. Wire rod under each step provides added strength
• Quick installation: exclusive ez hang strap system makes for a quick and easy installation

User questions & answers

Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	It is 12" WIDE BY 1 1/2" DEEP
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	sorry ... sounds like a safety standard I'm not familiar with
Question:	Will the L22 4P fit in a 22" opening
Answer:	Hi, I start collapsing from the top down. The most important item for safety is not having your fingers in a position that they get pinched when a section drops.
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	NOT IF THE AREA YOU ARE WORKING IS ABOVE 10 FEET...IT IS SAFE , DURABLE & LIGHTWEIGHT...THE MAX EXTENSION IS 12 FEET

Product description

Werner 55-1 - Attic Ladder Spreader Hinge Arms - MFG 2006 And Older - (Pair)#0083/23

• Werner 55-1 - Attic Ladder Spreader Hinge Arms - MFG 2006 And Older - (Pair)

User questions & answers

Question:	Will this work on a werner attic master (circa 1990) part #52508-01? the brace part number is
Answer:	Double zipper closes it entirely.
Question:	Will this work with Werner model W
Answer:	No it doesn't come with the steps
Question:	Will this work on a werner attic master model 2210? Manufactured by Kentucky laadder in
Answer:	Pull down steps. Climb steps. Unzip cover and enter attic. It's made a huge difference!!
Question:	I have model A2508 will this work
Answer:	Yes, the item was manufactured to fit that exact size.

Product description

The Louisville big boy S305P 350 pound capacity wood folding access ladder. Easily allows you to store large holiday decorations in attics or storage areas with the oversized opening. Every step is reinforced for extra strength. It opens and closes smoothly and easily. Big boy come fully assembled in box and includes easy hang strap to make installation a snap.

From the Manufacturer

Louisville Ladder L305P, rated for 350 pound load capacity. Pre-assembled, contains installation kit and instructions. Adjustable spring tension and extra corner bracing keeps stairway frame square. Metal hinges riveted on both sides of rail joints limit side motion. Reinforced steps, wire rod under each step for strength. EZ-Hang strap system acts as temporary supports for quick and easy installation. Has extra-large 30" x 60" frame size for roomier attic access. Meets or exceeds requirements of American National Standards Institute. Installation kit includes EZ-hang strap system, 36" pull cord, 4 support straps, 4" x 6" plywood shim (for final squaring only), 8 - 7/8" roofing nails, door, and installation instructions. This big boy attic ladder is one of many top quality items in our attic ladders department.

• HEAVY DUTY: 350 pound capacity including user and tool weight
• SAFETY AND COMFORT: Extra deep steps that are easy to climb, which also reduce foot pain and fatigue
• QUICK AND EASY INSTALATION: Exclusive E-Z hang strap system
• STRENGTH: Wire rod under each step
• DURABLE: Wood construction offers lasting strength and support

User questions & answers

Question:	What is the length of B in the last picture (showing the folding mechanism
Answer:	it is not fire rated.
Question:	What is the stair width? I have big feet and need a wide stair
Answer:	Should fit...on center means center to center. So 24" on center is 22½" in between.
Question:	Can this ladder be used for both residential and commercial
Answer:	Yes, but it's a tight fit. The wooden frame is 21 3/4" wide, so while it will fit in a 22" joist bay, there's little tolerance for adjustment. Your joists had better be parallel in both directions. Mine were a little out of whack in both directions, so I had to make tapered shims to compensate. One hint: check for squareness of the assembly by closing the stairs and seeing if the door cover (presumed to be a rectangle) lines up.
Question:	This version is currently about $20 cheaper than the 7' - 8'9"" model. Is there any reason this one can't be cut down shorter than the listed
Answer:	Rather than risking your safety and welfare on an old unit, buy a new one. The ladder wood dries out with heat and old age, the hardware gets bent and loose. Probably one spring broke so they removed the other. How does it stay closed with no springs? My hardware and spring arms were getting very loose and the steps would crunch when you stepped on them from being dry. Weigh the risk $86 and free shipping for a new unit. At least that's what it was when I bought mine. Every time I use it now I ask myself why didn't I do this 15 years ago
Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	I think it might work but your first step would be close to the floor. Might be better to find a model mad for 8'-10'. I used this one in my garage which has 10'-6" ceiling, it is an awesome ladder.
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	It should work. My ceiling is 10 feet and I had to cut over 2 feet off from it might be just a little steep
Question:	Will the L22 4P fit in a 22" opening
Answer:	Yes
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	I have this installed in my garage with an 11 ft ceiling.. It comes with a expandable pole to reach the loop to pull the door down. Once that is done, being 5ft 9 inches tall, I use a 3 step stool to stand on to fold out the ladder to the floor. I also use the step stool to stand on when folding it back up. I have had it installed for almost a year now and have always opened and closed it by myself.

Product features

Step 1 Measure the rough opening

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

Measure the space for rough opening where you intend to install your attic ladder. This attic ladder will fit in an opening that is 30- inches wide and 60-inches long. The actual clearance once installed will be slightly smaller.

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 10 and 12 feet, this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 79-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet, you will need 70-inches of landing space. This is the maximum amount of space needed.

Product description

Attic Ladder Spreader Hinge Arms  Replacement Kit for Werner 55-1 2006 and Older - (Pair)



Description

This kit is the part that helps you replace older, If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder.

Offer maximum durability and precise performance.

*please be sure to check your ladder for model number before placing your order or you can also contact our customer service for any question,We will reply you in one business day.*

Fitment 

Fits Models Manufactured Before February 2006 ,Models Mk 1 thru Mk 3



Package Included 

2 X hinge arms and needed Hardware shown in pics.Note: springs are not included with the 55-1.

Shipping 

All items will be shipped out in 1 business day,no expedited service available.

We ship our items to USA only(Does NOT include Hawaii，Alaska or Puerto Rico, PO Boxes/APO's ).

Contact us 

Any Questions,Just feel free to contact us on Amazon.We will reply you in 24 hours.

• Fitment: Fits Models Manufactured Before February 2006 ,Models Mk 1 thru Mk 3. A2208 A2210 A2508 A2508 A2510 W2208 W2210 W2508 W2510 WH2208 WH2210 WH2508 WH2510 WH3008 WH3010
• This kit is the part that helps you replace older, If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder.
• Offer maximum durability and precise performance.
• Package Included: 2 X hinge arms and needed Hardware shown in pics.Note: springs are not included with the 55-1.
• Please check your ladder for model number before purchasing this item.

User questions & answers

Question:	will this work with MFS0399-0101 attic doors
Answer:	No. If u just need a ladder find a local woodworker and have him build u one
Question:	Would this work for my louisville attic ladder model # s224p , manufactured in
Answer:	The 22 x 47 and the 22 x 54 sizes will fit into a 22 inch wide rough opening.
Question:	What is the size for the rivets for the pivot plate? Where do we find this size
Answer:	The ladder comes with everything you see in the picture. So yes the ladder is included as well as a red handrail. The plastic ladder ends can be purchased separately.
Question:	Will this work with Werner model W
Answer:	I have a 9 foot high ceiling and I had to cut off about two feet of the bottom of the ladder, so all you will have to do is trim down the required length to fit your 7 foot ceiling. should be a snap. Good luck.

Product description

Revolutionary Telesteps Attic/Loft telescoping extension ladder, made from high quality aluminum alloys, this ladder can be used for 8 ft. to 10 ft. ceiling heights. This telescoping Attic/Loft ladder features fully automatic extension and retraction with a patented one touch release mechanism for ease of use. OSHA certified, and ANSI 14.2 tested, with a 300 LBS Type 1A duty rating, this telescopic ladder gives the user super easy access to the attic or loft, and the ladder retracts and stores easily on the attic or loft door. Equipped with non-slip feet for safe grip on the substrate and elliptical tubes for strength, these ladders are built with safety in mind. Great for use in new home construction or in existing homes.

From the Manufacturer

Revolutionary Telesteps Attic or Loft telescoping extension ladder. Made from high quality Aluminum alloys this ladder can be used for 7 ft to 10 ft ceiling heights. This telescoping Attic/Loft ladder features fully automatic extension and retraction with a patented one touch release mechanism for ease of use. 300 LBS Type 1A duty rating this telescopic Attic/Loft ladder gives the user super easy access to the attic or loft and the ladder retracts and stores easily on the Attic or Loft door. Equipped with non-slip feet for safe grip on the substrate and elliptical tubes for strength these ladders are built with safety in mind. Trusted by the US Military and Swat teams the Telesteps telescoping ladders are the original design and the World's only fully automatic telescoping ladders. Telesteps ladders are Easy to Use, Easy to Carry and Easy to Store. Use them at Home, at the Office, Cottage, Boat, Motorhome or anywhere you may need a ladder.

• Telescoping attic or loft ladder (attic door sold separately)
• Type 1A 300 lb rated; weighs 23 lbs. Spring loaded so it is safe and easy to extend and retract
• Fully automatic operation up and down with patented One-Touch release mechanism
• Can be used in applications for 8 ft-10 ft ceiling heights. Length 33 inch to 10 inch fully extended
• OSHA Compliant, ANSI 14.2 tested

User questions & answers

Question:	Can the ladder rungs detach to customize for height
Answer:	Remember this a heavy ladder that is quite heavy that has stackable steps that would not be safe to attached as pull down ladder. So I would not recommend this type of ladder for any attachment.
Question:	Do you sell the attic door as well? It says it’s sold separately. Can you post a link
Answer:	Thanks for your suggestion, we will forward your opinion to the relevant department and suggest them to develop.
Question:	does this need a separate frame in order to install this
Answer:	I don't know where the ladder is made. I looked all over my ladder and it does not say. I looked on the Wolfwise web site and it doesn't say either. I can tall you this. I'm very impressed with this ladder. It weighs about 25 lbs and It's very strong, I didn't expect it to be as rigid as it is. The bottom tubes are about 2 3/4" diameter. I weigh over 200 lbs and with the ladder fully extended there is very little give or flexing as I go up and down, far less than with an aluminum extension ladder. When letting the ladder down there is a soft drop feature as each section collapses so there is little chance you would get your finger smashed. You won't go wrong with this ladder.
Question:	Can the ladder be shortened? I'm looking for a solution for a 24" length opening
Answer:	Hello, it is recommended that the ladder is at an angle of 60-75 degrees with the ground when using.