12 best window kits
Window kits, specifically window insulation kits, are products designed to improve the energy efficiency of windows by providing an extra layer of insulation and weatherproofing. These kits are commonly used in homes and commercial buildings to reduce heat loss, save on energy costs, and create a more comfortable indoor environment. Here's what you should know about window insulation kits:
Purpose of Window Insulation Kits: Window insulation kits are primarily used to improve insulation and reduce heat transfer through windows. They create a barrier that helps to keep warm air inside during the cold months and hot air outside during the warm months, thus reducing the load on heating and cooling systems.
Components of Window Insulation Kits: These kits typically include several components:
- Clear Plastic Film: A large sheet of clear plastic film that can be attached to the window frame.
- Double-Sided Tape: Adhesive tape used to secure the plastic film to the window frame.
- Heat Shrink Film: Some kits include heat shrink film that can be applied to the plastic to provide a tight and clear seal.
- Mounting Hardware: Some kits may include mounting hardware for ease of installation.
Installation: Installing a window insulation kit involves the following steps:
- Cleaning the window frame to ensure good adhesion.
- Applying double-sided tape around the window frame.
- Affixing the plastic film to the tape.
- Using a hairdryer to heat and shrink the film, removing wrinkles and creating a transparent seal.
Benefits of Window Insulation Kits:
- Improved energy efficiency by reducing heat loss and drafts.
- Reduced heating and cooling costs.
- Enhanced indoor comfort by maintaining consistent indoor temperatures.
- Protection of windows from moisture and condensation.
- Increased sound insulation, reducing outside noise.
Types of Kits: There are different types of window insulation kits available, including interior and exterior kits. Interior kits are more common and easier to install, while exterior kits are used for added protection in extreme weather conditions.
Transparency: The plastic film used in these kits is designed to be nearly transparent, allowing natural light to enter the room and maintaining visibility through the window.
Durability: Window insulation kits are typically designed to last for one season. They can be removed and replaced as needed.
Window insulation kits are a cost-effective and practical solution for improving the energy efficiency of windows, particularly in older homes or buildings with drafty windows. They can be a valuable addition to your home by helping to reduce energy consumption and create a more comfortable living environment.
Below you can find our editor's choice of the best window kits on the market
Duck MAX Strength Heavy Duty Insulating Film Window Kit, 3-Window, 62-Inch x 126-Inch, Indoor, 284351
Duck
Product description
During the cold weather months, windows become a prime spot for energy loss. Duck Brand heavy-duty window kits create an added barrier between the outdoor air and your home's inside, helping block drafts and air leaks that lead to high heating costs. Made with puncture-resistant film that is stronger than standard window kits, these kits are great for high-traffic or pet-friendly households. Plus, it's made with clear shrink film for good visibility and it's easy-to install and remove once the warmer weather arrives. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long. Material Tape, Plastic
- Insulates up to three 3 feet by 5 feet windows to block drafts
- Kit includes: heavy-duty film and window kit tape
- Easy to install
- Removes cleanly at the end of the season
User questions & answers
| Question: | Does the tape take the varnish off of the frame when removed |
| Answer: | I would have to say yes. If you can actually get tape to stick to varnish in the first place. If it sticks, it will take some with it when removed |
| Question: | What are the exact measurements of this product? I’m reading here from the manufacturer that it’s 62” x126” when the box in the photo says 84”x |
| Answer: | Thank you for your question! There are 2 window kits listed. One is a patio door kit which is 84" x 120", the other is a 3pk window kit that is 62" x 126". Before purchasing, make sure to select the window kit size you prefer. |
| Question: | Okay, how do you get the last fold apart? I measured 60" wide. I think there must be another fold to make it 120" but I can't find it |
| Answer: | First, check the package to make sure you have the 7'x10' version since they also offer a 62" wide product that uses very similar style packaging. Also, note that it is 120" LONG and 74" wide, so static cling isn't an option here. Good luck! |
| Question: | Will the plastic keep toxic gases from seeping into the house through cheap, single-pane windows |
| Answer: | Thank you for your question! The window film prevents and blocks drafts; however, we cannot guarantee it will block toxic fumes. |
Product features
Duck Brand Has You Covered
Designed to fit around different windows in your home, Duck Brand Window Kits have all you need to block drafts and air leaks that can lead to high heating costs during cold weather months.
Keep Your Home Warm in the Winter
Stop drafts cold. When winter strikes, Duck home weatherization products help you save money on costly energy bills. Easy to install, these products help keep your home warm in the winter.
Standard Shrink Film WIndow Insulation Kit
Standard kits include window kit tape and one shrink film sheet that must be cut to size before application. Measuring tape recommended for Standard Kits. Available in 3, 5 and 10 packs for standard windows, or 1 XL pack for large windows and patio doors.
Roll-On Shrink Film Window Insulation Kit
Roll-On Kits feature a pre-taped top edge for a quicker and easier installation — no measuring needed. Available in 3 and 5 packs for standard windows, or 1 XL pack for large windows and patio doors.
Max Strength Shrink Film Window Insulation Kit
Max Strength kits feature heavy-duty, puncture-resistant shrink film that's perfect for households with pets or young children. Available in the Standard Shrink Film Sheet or Roll-On Shrink Film options in a 3 pack for standard windows, or 1 XL pack for large windows and patio doors.
Clean The Surface First
Clean the surface before you apply the tape and let dry completely. Removing dust and debris ensures better tape adhesion and longest lasting-performance.
Smooth Out Wrinkles With a Hair Dryer
Use a hair dryer to smooth out wrinkles on the shrink film for a better seal and increased transparency. Move the hair dryer back and forth without holding it in one spot for too long.
Trim Shrink Film Last
Cut the shrink film around the outside of the tape after you use the hair dryer to smooth out wrinkles.
Duck Brand Indoor 10-Window Shrink Film Insulator Kit, 62-Inch x 420-Inch, 286216
Duck
Product description
During the cold weather months, windows become a prime spot for energy loss. Duck Brand Shrink Film Window Kits create an added barrier between the outdoor air and the inside of your home, helping block drafts and air leaks that lead to high heating costs. Apply to the inside of your window to seal out the cold from getting into your home. Plus, it’s made with clear shrink film for good visibility and it’s easy to install and remove once the warmer weather arrives. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long. Tools needed: measuring tape, scissors, hair dryer
Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 420 inches of crystal clear plastic film, plus 1/2-inch x 168 feet (2016 inches) of mounting tape, enough to insulate up to ten 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!
From the Manufacturer
Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 420 inches of crystal clear plastic film, plus 1/2-inch x 168 feet (2016 inches) of mounting tape, enough to insulate up to ten 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!
- Reduce your energy costs by insulating your windows
- Crystal clear film heat shrinks to seal out drafts and cold
- Contains 62 x 420" of crystal clear film and 1/2-inch by 168-feet (2016") roll of double-sided tape
- Helps increase energy efficiency - Home Smart and Earth Friendly
- Kit insulates ten 3' x 5' windows
User questions & answers
| Question: | Can this be removed and re-used another winter? Sorry if this is answered but didn't get through all 154 reviews. Is it unsightly? Thanks |
| Answer: | Yes, it can be re-used, even if you use a hair dryer to shrink it. I remove it carefully, fold each piece up, and label it with a sticky note telling which room/window you removed it from. This makes it MUCH easier the next year to reappy. You will need to purchase more double-sided tape to reapply the following year, however, I've found that if you search around on amazon, it is sometimes much cheaper to buy a full window kit, rather than the individual, small 24' rolls of replacement tape. |
| Question: | Is this just one huge roll of shrink film, or is it 10 separate pieces |
| Answer: | It is two semi-huge films, 62 inches by 210 inches each |
| Question: | Will this insulate me from the alt right and still allow me to see out |
| Answer: | With the alt right who wants to still see out? |
| Question: | Does this work for Mac too or just Windows |
| Answer: | It will work on all brands of windows, Anderson, Hullco, Window World, Jellco etc. All types wood, vinyl, aluminum. It is a good product and will help will heating costs. |
Product features
Duck Brand Has You Covered
Designed to fit around different windows in your home, Duck Brand Window Kits have all you need to block drafts and air leaks that can lead to high heating costs during cold weather months.
Keep Your Home Warm in the Winter
Stop drafts cold. When winter strikes, Duck home weatherization products help you save money on costly energy bills. Easy to install, these products help keep your home warm in the winter.
Standard Shrink Film WIndow Insulation Kit
Standard kits include window kit tape and one shrink film sheet that must be cut to size before application. Measuring tape recommended for Standard Kits. Available in 3, 5 and 10 packs for standard windows, or 1 XL pack for large windows and patio doors.
Roll-On Shrink Film Window Insulation Kit
Roll-On Kits feature a pre-taped top edge for a quicker and easier installation — no measuring needed. Available in 3 and 5 packs for standard windows, or 1 XL pack for large windows and patio doors.
Max Strength Shrink Film Window Insulation Kit
Max Strength kits feature heavy-duty, puncture-resistant shrink film that's perfect for households with pets or young children. Available in the Standard Shrink Film Sheet or Roll-On Shrink Film options in a 3 pack for standard windows, or 1 XL pack for large windows and patio doors.
Clean The Surface First
Clean the surface before you apply the tape and let dry completely. Removing dust and debris ensures better tape adhesion and longest lasting-performance.
Smooth Out Wrinkles With a Hair Dryer
Use a hair dryer to smooth out wrinkles on the shrink film for a better seal and increased transparency. Move the hair dryer back and forth without holding it in one spot for too long.
Trim Shrink Film Last
Cut the shrink film around the outside of the tape after you use the hair dryer to smooth out wrinkles.
Duck Brand Indoor 5-Window Shrink Film Insulator Kit, 62-Inch x 210-Inch, 286217
Duck
Product description
Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 210 inches of crystal clear plastic film, plus 1/2-inch x 84 feet (1080 inches) of mounting tape, enough to insulate up to five 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!
Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 210 inches of crystal clear plastic film, plus 1/2-inch x 84 feet (1080 inches) of mounting tape, enough to insulate up to five 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!
From the Manufacturer
Chilly winter weather can send the home heating bill through the roof. But a little insulation goes a long way! Cut a chunk out of your power bill, and make your home more energy efficient with the Duck Window Kit! The kit includes 62 x 210 inches of crystal clear plastic film, plus 1/2-inch x 84 feet (1080 inches) of mounting tape, enough to insulate up to five 3-foot x 5-foot windows. Simply use the tape to affix the film to the window frame, then use a conventional hair dryer (not included) to shrink the film into an airtight lining over the window. The film helps prevent drafts and heat loss to provide a drastic increase in energy efficiency. A properly sealed home can cut energy costs by hundreds of dollars a year. This simple solution is easy to install, affordable, and works warming wonders. Be home smart and with the Duck Window Kit! Get yours today!
- Reduce your energy costs by insulating your windows
- Crystal clear film heat shrinks to seal out drafts and cold
- Contains 62 x 210" of crystal clear film and 1/2-inch by 84-feet (1080") roll of double-sided tape
- Helps increase energy efficiency - Home Smart and Earth Friendly
- Kit insulates five 3' x 5' windows
User questions & answers
| Question: | My windows are kinda old & sometimes build up condensation during the winter. Would this still work as far as staying on |
| Answer: | I have used this product on my home windows, which also had condensation issues, and the product worked quite well. |
| Question: | When you take the plastic off, does the tape strip the paint on the window sill? I had something similar before and it ripped the paint right off |
| Answer: | Love the product, it does what it’s supposed to do BUT upon removal, it peeled a lot of paint from the window frame & sill. |
| Question: | Can this be used safely on wallpaper |
| Answer: | Yes, I use it on my walls with wallpaper. The double sided tape sticks very well. When It's time to remove the tape i spray the tape with windex window cleaner and it melts the sticky away and removes very easily. |
| Question: | can u just tape it on the window frame and not the wooden window sill |
| Answer: | Everyone has an opposite answer; I need the same question answered, and in these answers, one says yes, the next one says no, the next says yes, next one says no. How do you do it if you have no actual wooden frame or any type of frame except for the frame that the "glass" sits in? I have drywall window sills and it says "not for drywall," leaving me nothing to tape it to but the actual window frame itself. |
Product features
Duck Brand Has You Covered
Designed to fit around different windows in your home, Duck Brand Window Kits have all you need to block drafts and air leaks that can lead to high heating costs during cold weather months.
Keep Your Home Warm in the Winter
Stop drafts cold. When winter strikes, Duck home weatherization products help you save money on costly energy bills. Easy to install, these products help keep your home warm in the winter.
Standard Shrink Film WIndow Insulation Kit
Standard kits include window kit tape and one shrink film sheet that must be cut to size before application. Measuring tape recommended for Standard Kits. Available in 3, 5 and 10 packs for standard windows, or 1 XL pack for large windows and patio doors.
Roll-On Shrink Film Window Insulation Kit
Roll-On Kits feature a pre-taped top edge for a quicker and easier installation — no measuring needed. Available in 3 and 5 packs for standard windows, or 1 XL pack for large windows and patio doors.
Max Strength Shrink Film Window Insulation Kit
Max Strength kits feature heavy-duty, puncture-resistant shrink film that's perfect for households with pets or young children. Available in the Standard Shrink Film Sheet or Roll-On Shrink Film options in a 3 pack for standard windows, or 1 XL pack for large windows and patio doors.
Clean The Surface First
Clean the surface before you apply the tape and let dry completely. Removing dust and debris ensures better tape adhesion and longest lasting-performance.
Smooth Out Wrinkles With a Hair Dryer
Use a hair dryer to smooth out wrinkles on the shrink film for a better seal and increased transparency. Move the hair dryer back and forth without holding it in one spot for too long.
Trim Shrink Film Last
Cut the shrink film around the outside of the tape after you use the hair dryer to smooth out wrinkles.
3M Indoor Window Insulator Kit, Window Insulation Film for Heat and Cold, 5.16 ft. x 17.5 ft., Covers Five 3 ft. by 5 ft. Windows
3M
Product description
Available in a variety of indoor and outdoor window sizes. 3M Window Insulator Kits keep cold drafts out and warm air in through heat shrink window film and Scotch Window Film Mounting Tape. 3M window kits have the clearest film and stay up all season long with Scotch tape technology. The Scotch double sided tape holds firmly between films and surfaces.
With the 3M indoor window insulator kit, you can lower your heating bills during the winter and make your home more energy-efficient. Part of 3M's line of energy-saving products, this kit includes window insulation film and a roll of double-sided mounting tape to create an airtight seal. Stretching the film removes wrinkles for a transparent view. This version of the 3M indoor window insulator kit enables you to insulate five 3-foot-by-5-foot windows.
Keep the Heat In and the Cold OutMade by 3M, this indoor window insulator kit contains window insulation film along with Scotch Window Film Tape to keep cold drafts out and warm air in. As a result, you can reduce your heating costs during the winter. The film shrinks tight around your window for a transparent, wrinkle-free fit and is made to reduce condensation and prevent frost build-up.
Double-Sided Mounting Tape for a Secure Seal
Included with this kit is a 1/2-inch-by-27-7/10-yard roll of 3M window film mounting tape to keep your insulation in place all season long. This double-sided tape seals off cracks and crevices, creates an airtight seal, and establishes a strong bond between the surface, the tape, and the insulation film, as recommended in ENERGY STAR's "Seal and Insulate" guidelines. Featuring a convenient, ready-to-peel liner, the tape adheres easily to a variety of surfaces and stays intact upon removal.
Simple, Fast Installation
Installing the window insulation is easy. You simply unfold the film and cut it to the width of the window, allowing an extra inch on all sides. Next, you firmly apply the mounting tape around the window frame and remove the paper liner. Then you apply the film to the tape, starting at the top of the window, and reposition and stretch the film to remove wrinkles. Finally, you use a blow dryer to remove any remaining wrinkles, then trim any excess film.
Made in the United States, and designed for indoor use only, this insulator kit can be used with aluminum, vinyl-clad, or painted or varnished wood molding, but it should not be applied to veneer paneling or Lauan mahogany molding. The film and tape should be removed from the window at the end of the season. The film measures 10 square yards, or 5.16 feet by 17.5 feet by 0.75 thousandths of an inch (H x W x D), and weighs 0.33 pounds.
What's in the Box
Window insulation film and one roll of mounting tape.
From the Manufacturer
Get your home ready for winter with 3M energy solutions. Our window insulator kits are easy to install, and help keep your utility bill low during the cold months. Plus they use Scotch Window Film Mounting Tape and have the clearest film. The cost of heating your home may be rising, but there's something you can do. 3M window insulator kits help keep the warm air in and cold drafts out. And your energy bill down.
- Saves energy and reduces heating costs
- Reduces condensation and prevents frost buildup
- Quick and easy installation
- Fits five 3'x 5' indoor windows
User questions & answers
| Question: | I am from the South, so my big question is, does it insulates from heat so well as it does from cold |
| Answer: | Short answer: It does not insulate well from temperature exchange through your window, but it does prevent air exchange, so it can dramatically reduce your heating/cooling bill if you are constantly having to condition fresh air from outside.Long answer: I have used this in a warehouse office where we kept it up year-round (because the landlord was too cheap to replace 50+ year old windows). Just keep in mind; First, with less air exchange, make sure that your HVAC has a good filter system, and that you replace it regularly to prevent buildup of allergens/mold in the home. Second, if you live in a particularly humid area then this can result in water (and mold) buildup between the plastic and window during warm weather, which is bad (using the exterior version of this product may work better). Third, these are great to save a few $$ and keep the house more comfortable during extreme weather for a few months, but they are not a good long-term solution. The tape gives out, the plastic can yellow or haze over time, you lose the use of the window, it is easy to disturb and ruin... generally not a good long-term game plan. If you need a more permanent solution then consider using clear caulking to seal the seams/cracks in your window (assuming it is not against safety/fire code, remember you typically need 2 exit points and many rooms only have 1 door and 1 window), or else consider replacing the window. |
| Question: | How does this hold up compared to frost king |
| Answer: | This holds up much better then frost king... I have never had frost king last a whole season on my windows but the 3M lasts no matter how long the cold season has lasted. I will never go back to using Frost King again. |
| Question: | Has anyone had success applying this to a window without trim? Our 50s track house just has drywall-cased windows |
| Answer: | I want an answer to this too! I also have the drywall-cased windows from the 50s. Thanks!! |
| Question: | Will this work for insulating from the heat of a hot climate too |
| Answer: | I would assume so, though we live in Maine near the coast where it can be in the teens and 20s sometimesduring the weather; I assume it would work since 3M is an excellent product - the hardware versionsdon't seem to work as well. You'll need the 3M tape for this as well. |
3M Indoor 1-Window Insulation Kit, Clear Window Film for Heat and Cold, 7 ft. x 19.7 ft of film, Covers One XL 6 ft 8 in x 19.5 ft Window
3M
Product description
Available in a variety of indoor and outdoor window sizes. 3M Window Insulator Kits keep cold drafts out and warm air in through heat shrink window film and Scotch Window Film Mounting Tape. 3M window kits have the clearest film and stay up all season long with Scotch tape technology. Scotch double sided tape holds firmly between films and surfaces.
With the 3M indoor window insulator kit, you can lower your heating bills during the winter and make your home more energy-efficient. Part of 3M's line of energy-saving products, this kit includes window insulation film and a roll of double-sided mounting tape to create an airtight seal. Stretching the film removes wrinkles for a transparent view. This version of the 3M indoor window insulator kit enables you to insulate one window measuring 6 feet 8 inches by 19 feet 5 inches.
Keep the Heat In and the Cold OutMade by 3M, this indoor window insulator kit contains window insulation film along with Scotch Window Film Tape to keep cold drafts out and warm air in. As a result, you can reduce your heating costs during the winter. The film shrinks tight around your window for a transparent, wrinkle-free fit and is made to reduce condensation and prevent frost build-up.
Double-Sided Mounting Tape for a Secure Seal
Included with this kit is a 1/2-inch-by-27-7/10-yard roll of 3M window film mounting tape to keep your insulation in place all season long. This double-sided tape seals off cracks and crevices, creates an airtight seal, and establishes a strong bond between the surface, the tape, and the insulation film, as recommended in ENERGY STAR's "Seal and Insulate" guidelines. Featuring a convenient, ready-to-peel liner, the tape adheres easily to a variety of surfaces and stays intact upon removal.
Simple, Fast Installation
Installing the window insulation is easy. You simply unfold the film and cut it to the width of the window, allowing an extra inch on all sides. Next, you firmly apply the mounting tape around the window frame and remove the paper liner. Then you apply the film to the tape, starting at the top of the window, and reposition and stretch the film to remove wrinkles. Finally, you use a blow dryer to remove any remaining wrinkles, then trim any excess film.
Made in the United States, and designed for indoor use only, this insulator kit can be used with aluminum, vinyl-clad, or painted or varnished wood molding, but it should not be applied to veneer paneling or Lauan mahogany molding. The film and tape should be removed from the window at the end of the season. The film measures 15 square yards, or 7 feet by 19.7 feet by 0.75 thousandths of an inch (H x W x D), and weighs 0.5 pounds.
What's in the Box
Window insulation film and one roll of mounting tape.
From the Manufacturer
Get your home ready for winter with 3M energy solutions. Our window insulator kits are easy to install, and help keep your utility bill low during the cold months. Plus they use Scotch Window Film Mounting Tape and have the clearest film. The cost of heating your home may be rising, but there's something you can do. 3M window insulator kits help keep the warm air in and cold drafts out. And your energy bill down.
- Saves energy and reduces heating costs
- Reduces condensation and prevents frost buildup
- Quick and easy installation
- Fits one XL 6'8" x 19.5' indoor window
User questions & answers
| Question: | I am from the South, so my big question is, does it insulates from heat so well as it does from cold |
| Answer: | Yes, we have bought a set of driveway alarm before and then add this doorbell to our orignal alarm, it can not work without the base station. |
| Question: | How does this hold up compared to frost king |
| Answer: | No |
| Question: | Has anyone had success applying this to a window without trim? Our 50s track house just has drywall-cased windows |
| Answer: | Yes get another base and pair the sensors with the new base… |
| Question: | Will this work for insulating from the heat of a hot climate too |
| Answer: | The range is advertised as 1800 feet, the farthest I could set the transmitter was 500 feet and that was line of sight. Would I buy it again knowing what I know? No. |
Frost King V73/9H Indoor Shrink Window Kit 42 62-Inch, Clear, 9-Pack
Frost King
Product description
Frost King V73/9H Indoor Shrink Window Kit 42-Inch by 62-Inch, 9 sheets. Clear
From the Manufacturer
Frost King Shrink Window Kits are made for standard size windows and feature a crystal clear plastic sheet that shrinks tight and wrinkle free with any ordinary hand held hairdryer. Easily installs on metal, painted or varnished wood or vinyl clad frames with the double-face tape provided..
- This product adds a great value
- Product is highly durable and very easy to use
- This product is manufactured in China
User questions & answers
| Question: | Can it be used to cover 9x6feet screen porch with out any place to secure plastic |
| Answer: | I’m not sure I follow your question. The plastic needs to be secured via sticky tape, to the perimeter of the door and then blown tightly with a hairdryer |
| Question: | How does one remove the glue left on the window frame after removing window film tape that was in use for 5 years |
| Answer: | Get some industrial adhesive remover |
| Question: | Tape been improved? Bad reviews on it |
| Answer: | First, I want to make it clear that covering windows with a shrink window kit is usually well worth the time , money, and effort. It cuts heating costs and makes the house more comfortable. I have been doing this for more than 10 years. I apply new shrink plastic each year and have never had a problem till last year. In previous years with other brands (or maybe even this brand) removal of the tape wasn't a big deal. It usually held pretty good through the winter but when spring came it was easily removed. I don't know if the tape that comes with this kit has been improved. I saw other reviews that said what they bought wasn't sticky enough. The packages I bought (which were not bought on Amazon) had tape that was over the top sticky. I do not plan to buy this brand again. When I phoned the company to ask how to remove it I think they recommended heat and WD-40 which sounded extreme to me. It was way more sticky than other brands I had ever used. I questioned it when I applied it to my windows but decided that maybe it would last through the winter better. It has been a mess and time consuming to trying to get it off. In the past, I think that I have bought 3M double sided tape (which is often found in the winter insulation area of big box stores) when I have run short on what was included in a box of shrink window kit and had good luck. Looking at the choices on Amazon there are so many, I wouldn't know where to start with a suggestion. If you decide to buy it, I would suggest at least checking the tape before you get much applied by putting it on the intended surface, putting some of the shrink plastic on it, leave it for a day (and you might not even have to wait that long), and then try pulling it off. It is kind of a fine line between not being sticky enough and too sticky. If you are having difficulty removing it, I would look for a different double sided tape to use. |
| Question: | Does it have to be reapplied every year? Why |
| Answer: | If you want to open your windows in the warmer months, you'll need to take it off. Otherwise, sunlight and normal stress can also make the tape fail eventually. For a good seal, it's probably best to re-apply them every year. |
Product features
Frost King, Indoor Shrink Window Kit
Kits feature a crystal clear plastic sheet that shrinks tight and wrinkle free with an ordinary hand held hairdryer. The Kits can be easily installed on metal, painted, varnished wood or vinyl clad window frames with the double-face tape or nails provided.
Kits are available for basement windows, standard windows, extra large and picture windows and patio doors.
Duck 281068 5 Window Insulation Kit
Duck
Product description
During the cold weather months, windows become a prime spot for energy loss. Indoor Duck Brand Roll-On Window Insulation Kits create an added barrier between the outdoor air and your home's inside, helping to block drafts and air leaks that lead to high heating costs. Our window kit film comes in an easy-to-use roll with pre-taped top edge, which means no measuring needed - simply cut the extra film off once applied. Plus, they are made with crystal clear shrink film for good visibility and are easy to install and remove. For best results, use on clean and dry surfaces, such as painted or finished wood, aluminum or vinyl.
During the cold weather months, windows become a prime spot for energy loss. Duck Brand Roll-On Window Kits create an added barrier between the outdoor air and your home’s inside, helping to block drafts and air leaks that lead to high heating costs. Patented Roll-On film comes with a pre-taped edge for easy roll-on application, requires no measuring and fits snugly to window frames to provide an airtight seal. Plus, they are made with clear shrink film for good visibility and are easy-to install and remove once the warmer weather arrives. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.
From the Manufacturer
During the cold weather months, windows become a prime spot for energy loss. Duck Brand Roll-On Window Kits create an added barrier between the outdoor air and your home’s inside, helping to block drafts and air leaks that lead to high heating costs. Patented Roll-On film comes with a pre-taped edge for easy roll-on application, requires no measuring and fits snugly to window frames to provide an airtight seal. Plus, they are made with clear shrink film for good visibility and are easy-to install and remove once the warmer weather arrives. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.
- Kit includes one roll of premium shrink film and window kit tape
- Once applied, shrink film is trimmed to size - no measuring needed
- For best results use on clean and dry surfaces, including painted or finished wood, aluminum or vinyl
- Tools needed: scissors and hair dryer
- Easy to install and remove
User questions & answers
| Question: | Will this work for a bathroom window? And will it still work for a smaller window |
| Answer: | This is for a large patio doors. I suppose it would work on the outside of a bathroom window. You would just need to trim it. You put tape around the outside of the window frame and place plastic. It cannot be placed when the temperature is below freezing. |
| Question: | How many rolls does the 5 window kit come with |
| Answer: | Hi Doug, The 5 window kit comes with one roll of film that is 62" high by 200" wide. |
| Question: | Does the removal of the tape damage painted wooden trim |
| Answer: | No it does not. Peels off smoorhly. |
| Question: | How many sheets and sizes |
| Answer: | It is one large sheet that they roll up. You unroll it while applying it to the window and cut it down once your window is covered. It is 200 inches wide. Hope this helps! |
Product features
Duck Brand Has You Covered
Designed to fit around different windows in your home, Duck Brand Window Kits have all you need to block drafts and air leaks that can lead to high heating costs during cold weather months.
Keep Your Home Warm in the Winter
Stop drafts cold. When winter strikes, Duck home weatherization products help you save money on costly energy bills. Easy to install, these products help keep your home warm in the winter.
Standard Shrink Film WIndow Insulation Kit
Standard kits include window kit tape and one shrink film sheet that must be cut to size before application. Measuring tape recommended for Standard Kits. Available in 3, 5 and 10 packs for standard windows, or 1 XL pack for large windows and patio doors.
Roll-On Shrink Film Window Insulation Kit
Roll-On Kits feature a pre-taped top edge for a quicker and easier installation — no measuring needed. Available in 3 and 5 packs for standard windows, or 1 XL pack for large windows and patio doors.
Max Strength Shrink Film Window Insulation Kit
Max Strength kits feature heavy-duty, puncture-resistant shrink film that's perfect for households with pets or young children. Available in the Standard Shrink Film Sheet or Roll-On Shrink Film options in a 3 pack for standard windows, or 1 XL pack for large windows and patio doors.
Clean The Surface First
Clean the surface before you apply the tape and let dry completely. Removing dust and debris ensures better tape adhesion and longest lasting-performance.
Smooth Out Wrinkles With a Hair Dryer
Use a hair dryer to smooth out wrinkles on the shrink film for a better seal and increased transparency. Move the hair dryer back and forth without holding it in one spot for too long.
Trim Shrink Film Last
Cut the shrink film around the outside of the tape after you use the hair dryer to smooth out wrinkles.
Gila RTK500 06008001427 Window Film Complete Installation Kit, 1-Pack
Gila
Product description
DIY projects should be satisfying, not frustrating. Our Complete Window Film Application Kit contains the items to help with exactly that: a generously sized bottle of application solution, a plastic hard card squeegee to smooth bubbles, a low-lint cloth to whisk away debris without leaving more behind, and a trimming tool made for safety and accuracy.
From the Manufacturer
Gila films are the brand leader in DIY (do it yourself) window films. Our best in class deep dyeing, coating, and adhesive technologies have helped design higher performing, longer lasting films that are among the best in the marketplace. We manufacture and package our films at our world class manufacturing facility located in Martinsville, VA USA in order to measure and ensure tight quality and performance standards from start to finish.
- WORKS WITH ANY RESIDENTIAL WINDOW FILM: Created for better results, whether you're working with longer lasting adhesive film or reusable static cling film
- READY-TO-USE SOLUTION: Packaged in a 16oz spray-trigger bottle. Our ready-to-use solution is great for preparing the glass prior to film installation and helps with application of the film to the glass
- INCLUDES A LOW-LINT CLOTH: Reduce the hidden particles and debris before you install the film
- EASY-TO-USE FILM TRIMMING TOOL: Self-spacing and provides the recommended 1/16" spacing along the edges of the window
- HARD CARD SQUEEGEE FOR EASY INSTALLATION: The 3" x 4" hard card squeegee makes it easy to apply the film to the glass and extract the application solution used during the install to help ensure no water bubbles are left behind
User questions & answers
| Question: | Can you use this on a garage door window (plexiglass |
| Answer: | I used these on wood leg restaurant chairs. I just tapped them in with a hammer. If you needed to drill a pilot hole I would say very small, such as 1/16 th inch. |
| Question: | Page for window film suggested i buy gila rtk500 application tool kit complete and this, which kit includes. is this excessive amt of solution? thx |
| Answer: | Approximately 3/64" x 1/2" |
| Question: | Can this solution be used to apply other window films that aren't the Gila brand |
| Answer: | The entire height of the pad and nail is 1 inch with the pad width 3/4 inch and pad height about 6/8 inch. I had to use a nail to start a hole in a hard wood chair leg but that worked great! The nail in the pad went right in to a soft wood chair leg on it's own. |
| Question: | can i use standard window cleaner instead of the Gila application solution |
| Answer: | If your flooring has a fine finish and the spaces between the planks are narrow, you should be fine using these. We use them on our DR furniture legs which slide on our hardwood floor. They work very well. Keep an eye on how they're wearing so you're prepared to replace as needed. Don't have a 'lasts-a-really-long-time' item for a substitute. |
3m Window Kit 84" X 237"Film
3M
Product description
3M Clear Indoor Window Film Insulator Kit 84 in. W x 236 in. L
- 84" x 237" film
- 1/2" x 1008" tape
- Insulates a 6'10" x 19'7" door or window
- Clear as glass
- Shrinks wrinkle free
User questions & answers
| Question: | How thick is the film |
| Answer: | Yes it is too much & I don't know what to do with the rest of it. Does it clean glass/mirrors wood tile or what? It's 16 fl. oz.(473 ml) And you just need as much as you would use Windex to clean glass/mirrors. The instructions on the Film explains everything you need and it doesn't say anything about having to buy this product. I love the Film though. It's very pretty but can get bubbles after some time so it needs to be adjusted with or without the film tool kit. |
| Question: | Does this come with tape |
| Answer: | Yes, pls choose the static cling window film, not with glue, i bought a privacy window film from this seller:https://www.amazon.com/dp/B01EJG55KKworked very well with this product. |
| Question: | Can the film be cut and used for multiple smaller windows |
| Answer: | The kit is nice, but for extra solution or saving money, you can easily make your own. I successfully use *distilled or R/O* water (not tap - that has mineral in it that can leave deposits/film behind and be trapped) and i've used as little as 2 drops of soap and I like to add a dash or 2 of rubbing alcohol into it as well but maybe not necessary. This makes the slippery surface needed to slide the material around for positioning. |
Frost King V76H Shrink Window Kit 84-Inch by 110-Inch, Clear
Frost King
Product description
Frost King V76H Indoor Shrink Window Kit 84-Inch by 110-Inch, 1-sheet, Clear
From the Manufacturer
Frost King Shrink Window Kits are made for patio doors or large size windows and feature a crystal clear plastic sheet that shrinks tight and wrinkle free with any ordinary hand held hairdryer. Easily installs on metal, painted or varnished wood or vinyl clad frames with the double-face tape provided..
- This product adds a great value
- Product is highly durable and very easy to use
- This product is manufactured in China
User questions & answers
| Question: | will these work to keep hot weather out or just cold weather |
| Answer: | They will keep the hot air and humidity from seeping through the windows yes. |
| Question: | this film works, does it actually make a difference in the insulation |
| Answer: | Yes, it makes a BIG difference. It not only cuts drafts it creates an insulated barrier between your single pane leaky window and your heater, keeping the heat in and the cold out. |
| Question: | has any used the 3M insulation? which one is better and why |
| Answer: | I'd give the 3M product a slight edge in the quality of the double-sided tape, and for my largest window, the extra two-inches in size really helped, but the Frost King has been fine & was less expensive. |
| Question: | Can anyone please explain to me why one patio door kit is $6.36, but a 2 pack of the exact item down to the sku |
| Answer: | Easy one seller is making a few pennies and the other seller is taking people over the coals. |
Product features
Frost King, Shrink Window Kit
Kits feature a crystal clear plastic sheet that shrinks tight and wrinkle free with an ordinary hand held hairdryer. The Kits can be easily installed on metal, painted, varnished wood or vinyl clad window frames with the double-face tape or nails provided.
Kits are available for basement windows, standard windows, extra large and picture windows and patio doors.
Jeacent Window Seal Plates Kit for Portable Air Conditioners, Plastic AC Vent Kit for Sliding Glass Doors and Windows - Adjustable Length Panels for Exhaust Hose of 6” Diameter
- Functional window seal kit keeps your room cool for longer and save electricity charges. It effectively diffuse the hot air out of the window, preventing warm air circulating in your room meanwhile.
- Adjustable Window kit replacement for portable air conditioner. It can be freely stretched and adjusted in length. Maximum adjustable length: 120cm/47.2" (Approx).
- Suitable for all portable air conditioners with an air outlet of 15cm/6” diameter.
- Durable PVC material, fits for sliding window or sliding door. Easy to remove.
- Easy to install. Just nest the plate panels together and slide them to the length needed, then lock the screw attached. Package include: 3 plates, 1 x Screws Set.US Patent Pending. All Rights Reserved.
User questions & answers
| Question: | Hello my order is not arrive in time , please let me know the status |
| Answer: | As thick as it has to be.. |
| Question: | Will this fit a lp1417shr.asvaosh? lg portable air conditioner |
| Answer: | Yes |
| Question: | Hose included |
| Answer: | Yes. It comes as one big sheet of the film. You cut it to your window's measurements plus 1 inch on each side. |
| Question: | Do you have a sliding door kit |
| Answer: | Yes, it works on plexiglass and acrylic products. I used a similar static cling film on my garage door windows and it worked flawlessly. I highly recommend these static films for privacy, light diffusion and glare reduction, along with the overall look and ease of use. |
Product features
Features:
- Patent pending, unique desisn for easy use.
- Suitable for various models of portable air conditioner units.
- Convenient and Practical; simply assembly it and put it in place between the window and window frame.
- It can regulates the air exchange efficiently and keep out dust and rain.
- Made of durable PVC material, fits sliding window and doors.
- Easy To Install and remove, no damage to the window.
- Please let us know first if you are not satisfied with our products. We would try our best to help you if needed. Enjoy a cooler environment in summer.
Specifications:
-Color: Off White
-Material: PVC
-Adjustment length: 42~120cm (16.5"~47.2")
-Recommended length: 42~120cm (16.5"~47.2")
-Round hole diameter: 14.1cm(5.6")
-Fit for exhausted hose of 5.9"-6.0"
-Applicable model: For LG / For Shinco / For Gree / For Aux / For Haier / For Hisense,etc.
XFasten Transparent Window Weather Sealing Tape, 2-Inch x 30 Yards, Clear Window Draft Isolation Sealing Film Tape, No Residue
XFasten
- Is winter coming? Use this heavy-duty clear weather sealing tape on your leaky and drafty windows to stop cold drafts from entering your home.
- Residue-free window film tape adhesive is surface-safe and will not leave a residue nor lift the paint off from your windows upon removal on Spring time.
- Pressure-sensitive adhesive provides an air-tight seal, preventing strong cold drafts from permeating or blowing into your home. Provides ideal cold wind sealing (-17°C).
- This draft seal tape also prevents bugs, smog, dust and warm air from entering between the gaps on your windows or air-conditioning units.
- Waterproof winter window sealer plastic tape is strong enough to stick firmly on your windows for the whole winter duration and removes cleanly on spring time.
User questions & answers
| Question: | Is the material insulated for electricity |
| Answer: | It's made of plastic so I'm sure it's not a conductor of electricity. Although it isn't electrical tape and shouldn't be used for wiring. |
| Question: | how long will it stay in place and still be easily removed? months, years |
| Answer: | IT WILL STAY IN PLACE AS LONG AS THE SURFACE HOLDS - same with removing. |
| Question: | Is this for exterior window use |
| Answer: | I tried it for exterior use and it didn’t stop the water and it got waterlogged between layers. I wouldn’t recommend it. |
| Question: | Will this tape remove paint from walls or around the window |
| Answer: | Dear Valued Customer, Thank you for sending an inquiry. No, the XFasten Transparent Window Weather Sealing Tape's silicone adhesive is strong and waterproof but it is designed to adhere safely to surfaces. Its surface-safe silicone adhesive is designed to not leave any sticky residue, nor will it damage or lift-off paint from walls or window frames. We want to clarify that adhesives can react differently to various surface types, so it is always best to test out a short strip of adhesive on a small corner. Meanwhile, to ensure that no damage is done upon removal, then you can partially warm the adhesive using the warm air exhaust of a hairdryer before you uninstall the tape. This will soften and partially melt the adhesive, thus preventing any and all damage from occuring. We hope that we have answered your question. Please don't hesitate to contact us should you have any further inquiries. Have a nice day ahead! |
Product features
ABOUT THE XFASTEN WEATHER SEALING TAPE
The XFasten Weather Sealing Tape is a strong and weatherproof window sealer film tape that stops leaky and drafty windows from leaking cold and icy air, especially during the winter. It works even on cold temperatures as low as -17 Degrees Celsius and its pressure-sensitive adhesive stays firmly for the whole winter duration and removes cleanly when you need it by spring.
Why Choose the XFasten Weather Sealing Tape?
The XFasten Transparent Weather Sealing Tape provides an air-tight seal - preventing strong cold drafts from permeating or blowing into your home. It also provides ideal cold wind sealing. This tape also prevents bugs, smog, dust, and warm air from entering between the gaps on your windows or air-conditioning units.
Waterproof Adhesive
The XFasten Weather Sealing Tape is waterproof and also strong enough to stick firmly on your windows for the whole winter duration and removes cleanly on spring time.
Residue-Free
The XFasten Weather Sealing Tape is surface-safe and will not leave a residue nor lift the paint off from your windows upon removal.
Stops Cold Drafts
It's perfect for winter cold drafts as it can stay firmly even on extremely low temperatures. Does not shrivel or degrade over time.
Heavy Duty
The XFasten Weather Sealing Tape boasts a heavy-duty adhesive that stays strong even under strong, cold wind pressures.
Built to Last
The puncture-resistant and waterproof adhesive ensures that it can withstand extreme weather conditions. This tape is meant to take a beating!
Latest Reviews
View all
Straightening Shampoos
- Updated: 29.03.2023
- Read reviews
Fuel Cells
- Updated: 09.04.2023
- Read reviews
Cafepress Tofus
- Updated: 01.06.2023
- Read reviews
Agility Ladder For Softball
- Updated: 25.04.2023
- Read reviews
Logitech Wireless Mices
- Updated: 10.06.2023
- Read reviews