11 best sheet insulation
Sheet insulation is a material used in the context of insulation, especially for windows, HVAC systems, and buildings. It's an important component of weatherproofing and improving energy efficiency. Here's what you need to know about sheet insulation:
Types of Sheet Insulation:
- Fiberglass: This type of sheet insulation is made from fine glass fibers and is commonly used in residential and commercial buildings. It's lightweight, effective at insulating, and can be installed as rolls or boards.
- Foam Board: Foam board insulation is often used for its high insulating value and is available in various materials, including expanded polystyrene (EPS), extruded polystyrene (XPS), and polyisocyanurate. It's commonly used for insulating walls, roofs, and foundations.
- Reflective Insulation: Reflective insulation is typically made of foil or film and is designed to reflect radiant heat.It's commonly used in attics and under roofs to keep the interior cooler.
Applications:
- Window Insulation Kits: Sheet insulation can be used as a part of window insulation kits to improve energy efficiency in homes. These kits often include plastic film that is attached to the window frame using double-sided tape and then heated to create a tight seal.
- Weatherproofing: Sheet insulation is used to seal gaps and cracks in buildings, making them more airtight and energy-efficient. It helps to keep the cold air out in the winter and the hot air out in the summer.
- HVAC Systems: Sheet insulation is applied to HVAC ducts and pipes to prevent heat loss or gain, ensuring that conditioned air remains at the desired temperature during transport.
Benefits:
- Energy Efficiency: Sheet insulation is a key component of an energy-efficient building envelope, reducing heating and cooling costs.
- Improved Comfort: Properly installed sheet insulation helps maintain a consistent indoor temperature and reduces drafts, improving comfort.
- Noise Reduction: Some types of sheet insulation can also serve as sound barriers, reducing noise pollution from outside sources.
Installation:
- Installing sheet insulation usually involves measuring, cutting, and securing the material in place. Proper installation is crucial for maximum effectiveness.
- It's important to seal all joints and seams to prevent air leakage, as even small gaps can significantly reduce insulation performance.
Maintenance and Upkeep:
- Sheet insulation typically requires little to no maintenance once installed. However, periodic inspections are advisable to ensure that it remains in good condition.
Local Building Codes: It's important to be aware of local building codes and regulations when installing sheet insulation, as these can vary by location.
In summary, sheet insulation is a versatile material used to improve energy efficiency, weatherproofing, and HVAC system performance in buildings. It is available in various types, with fiberglass and foam board being commonly used for different applications. Proper installation and maintenance are key to maximizing its benefits in terms of energy savings and comfort.
Below you can find our editor's choice of the best sheet insulation on the market
US Energy Products 48" x 100' White Double Bubble Reflective Foil Insulation Thermal Barrier R8
US Energy Products
Product description
US Energy Products 4ft x 100ft White Double Bubble
- 4ft x 100ft White Double Bubble
- Class 1 / Class A Fire Rated ASTM Certified
- Made In USA / Super Fast Shipping / Ships Same Day
- SAFETY: Non-toxic, non-carcinogenic, fiber-free, and does not support growth of mold, mildew or insects or rodents.
User questions & answers
| Question: | Can this product be glued? My intention is to use it to insulate the inside of a roller garage door |
| Answer: | I used construction adhesive to attach it to my basement walls. Kind of have to use some sort of adhesive, unless you want it to fall over, or you want to build right up against it. Mine has been hanging around against the cinder block since dec 2018. |
| Question: | Is this the single bubble, or truly the DoubleBubble |
| Answer: | this is a true double bubble reflectix material |
| Question: | Stapling this to rafters in uninsulated shed and garage. (we rent--hot climate.) is this better than us en. prod. perf white/foil attic foilradiantb |
| Answer: | yes this is ideal for your application this is radiant barrier with a r value we have many contractors that use this for warehouse buildings, sheds, garages etc |
| Question: | Can this be used as an underlayment instead of felt when you roof a house |
| Answer: | yes the white version is ideal for the flooring underlayment |
Davitu 2018 TO-3P Transistor 26mmx20mmx0.3mm Insulation Pad Sheet Silicone Insulator 50 Pcs
Product description
Product Name : Silicone Thermal Pad Sheet.
Fit for : Package TO-3P
Transistor Material : Silicone.
Color : As Picture
Each Size : 2.6 x 2 x 0.03 cm / 1" x 0.8" x 0.01 (L x W x T).
Hole Diameter : 3mm / 0.1"
Weight : 16g
Between electronic components such as Semiconductor, IC, CPU, MOS and heatsink. Led Lighting, LCD TV, Telecom device, Wireless Hub, Power supply etc. Cooling Modules, Thermal modules, in all applications where a metal housing is used as heatsink.
Package Contents: 50 (+/-2%) x Silicone Thermal Pad Sheet
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Item specifics:
Unit type: lot (50 pieces/lot)
Package weight: 0.016kg
Package size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
- Unit type: lot (50 pieces/lot)
- Package weight: 0.016kg
- Package size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
K-Flex USA 6RSX3X4068 Insul-Sheet, 3/4" x 3' x 4', 12 sq. ft, Flat Sheet
K-Flex USA
Product description
INSUL-SHEET is non-porous and non-fibrous and its key physical properties are approved through supervision by Factory Mutual Research Corporation.
- Moisture Vapor Resistance
- Condensation Control
- Available as S2S (skin-two-side) or with factory-applied PSA
- Greengard certified as a low VOC material
- Temperature range: -297°F to 220°F (-182°C to 104°C)
User questions & answers
| Question: | can I use this to stuff into open spaces in between screen doors |
| Answer: | Should work provided opening isn't larger than k-flex & provided you can stuff it in. |
| Question: | Can i place this inside an hvac duct to decrease noise |
| Answer: | You can but you will have to glue it down. I recommend it on the outside because if this gets wet it acts like a sponge and you will grow mold on it |
| Question: | How spongy is this foam? I need something for a Kydex press. I'd be gluing 2 pieces together for the top and bottom |
| Answer: | I am not sure what a kydex press is... but this is more a memory foam, it gives enough top cushion, you might be able to smash it down to half its width if I had to guess. Used it has a pad for knees when tiling floors... make better then even the best knee pads on the market! |
| Question: | How elastic is this foam |
| Answer: | The 3/4" so called K-Flex sheet that arrived on my doorstep is far too stretchy to suit me. I went by the other guys comment who said it was not stretchy, well either he was wrong or they sent me the wrong product. This stuff looks & feels to my like Wet Suit Neoprene without the nylon fabric outer layers. I would describe it as very stretchy, the 37" width will stretch to 40" without much trouble. I hope this is Kflex because Neoprene operational temperatures are too low for my use. Kflex has higher operational specs. The crease from folding & the rolling into a box has not come out after a week laying flat. This crease made about a 1/8" indent about 1" wide in the 3/4" thickness. |
36" x 48" Elastomeric Insulation Sheet
Product description
' Insulation Sheet, Sheet Size 36 In. x 48 In., Thickness 1/2 In., Temp. Range -297 Degrees to 220 Degrees F, Color Black, Approx. R Value 2, Material NBR/PVC Based Elastomeric, For Use On Ducts, Tanks And Vessels, Includes PSA Backing, Standards UL 94, FM, And Greenguard '
- Price For: Each Includes: PSA Backing Approx. R Value: 2 Standards: UL 94, FM, And Greenguard For Use On: Ducts, Tanks And Vessels Item: Insulation Sheet Material: NBR/PVC Based Elastomeric Sheet Size: 36" x 48" Thickness: 1/2" Color: Black Temp. Range: -297 Degrees to 220 Degrees F Country of Origin (subject to change): United States
User questions & answers
| Question: | did you have problems with odor from this product |
| Answer: | It depends on how you want it to do. I have used both dynamats on 3 vehicles. If you want good sound and heat protection use the other with the tinfoil. I used this to cover the tin foil product to black it out under the dash and as a inner door, under the door panel, to help with sound and heat. Again, that is after lining the inside of the door with the other tinfoil dynamat.This product by its self isn't much of a heat and sound defuser without the other. I used it as a cover of the other exposed tinfoil and as a inter barrier. |
US Energy Products (AD3) Reflective Foam Insulation Shield, Heat Shield, Thermal Insulation Shield Radiant Barrier 48" x10ft 40sqft
US Energy Products
Product description
US Energy Products (AD3) Reflective Foam Insulation Shield, Heat Shield, Thermal Insulation Shield Radiant Barrier 48"x10ft (40sqft) 3mm Thick (AD3) EXTREMELY EFFECTIVE - reflect 97% of radiant energy, perfect RADIANT BARRIER. VAPOR BARRIER -Unaffected by humidity and moisture, mold resistant , can be used outdoor/indoor. SOUND BARRIER - excellent soundproofing material. SUPREME QUALITY - 3mm closed cell polyethylene FOAM (not a bubbles) sandwiched between PURE ALUMINUM (not a polyester film) on both sides. Easy to install, easy to cut and easy to clean, Strong but lightweight. FIRE RATE - Fire rate Class 1 / Class A, NON TOXIC - will not irritate skin, eye or throat. Non allergic.
- One layer closed-cell foam bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599
- Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail, glue or use a spray adhesive to hold in place! No mess, and no itchy fibers!
- Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Non-flammable, flame retardant
- Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. As well as provides benefits of soundproofing when used in walls, ceilings and floors. Can also increase your overall property value depending on use.
- Made in USA / Class 1 Class A Fire Rated / Waterproof
User questions & answers
| Question: | Can you use a spray adhesive and apply to metal doors |
| Answer: | A spray contact adhesive such as 3M 77 would allow you to bond the material to a metal door or similar. This material would provide a fair amount of sound dampening, but minimal thermal insulation. |
| Question: | Do you think this will work inside a tent |
| Answer: | yes yes very popular application waterproof class 1 class a fire rated radiant / vapor barrier / r value in one |
| Question: | How many degrees of heat can this resist |
| Answer: | up to 300 degrees |
| Question: | Which is better to reflect sunlight from a south-facing window - this product or your double bubble reflective foil insulation |
| Answer: | foam hands down is better than bubble |
US Energy Products Supershield Multipurpose 400sqft (48" x 100ft) White / Foil Reflective Foam Core Insulation (Not Cheap Bubble) DIY Weatherization Water Proof Meets Fire Codes USA Made
Product description
Over 67 Applications and Counting...Here are just a few... Behind Home Radiator, Window AC Wrap, Large Windsheild or Tire Protector for RV, Toy Hauler, Ice Chest, Cooler Wrap, Drinking Trough for Livestock, Under Carpet, Automobile Doors and Headliners, Tent and Sleeping Bag Mat, Above Ground Pool Mat, House Window Liner, Flex Ducts, Floating Floor, Carpet Underlay, Water Heaters, and so much more! Benefits of the RV Comfort Kit Multi-purpose design for use in RV Windows, Vents, Tires and Much More Reflects 97% of radiant heat transfer Hypoallergenic - indoor air quality rated Increased interior comfort during summer and winter Proudly 100% made in the USA Installs easily with razor knife Lightweight, durable, and easy to install Environmentally friendly - Waterproof
- 1/4 inch thick Reflective Foam Core Insulation. Easy to Install & Shape & Bend. Lightweight & Non-Toxic. Foam Core Not Cheap Poly Bubble
- One Sided a White Vinyl Finished Look, Other Side a True Highly Reflective Radiant Barrier
- Puncture, Crush and Water Proof. Class 1 Class A Fire Rating (Meets all Codes)
- Non Toxic / Eco Friendly / Reflects 99.75% of Radiant Heat Transfer
- Made in The USA!!! White one side Foil other side
User questions & answers
| Question: | Does this insulation serve as a vapor barrier |
| Answer: | About the thickness of four sheets of 20 lb copy paper. It is really thin and easy to roll on. I was able to put it under all panels without any problems. It will not give you any problems. |
| Question: | can I use supershield multipurpose reflective foil under hardwood flooring |
| Answer: | This product is meant to dampen panel vibration, so if it is applied directly to the speaker grille then it should dampen the vibration but then it would block the sound coming through the grille. Hard to understand exactly your scenario. If you are thinking of applying this to a cabinet under a speaker grille, it would dampen vibration in the cabinet which may be transmitted to the grille but the grille may vibrate on its own from the sound waves exciting it. Sorry I could not be more specific but these types of issues are difficult to diagnose remotely. |
| Question: | Can i use this for a tiny house to insulate the whole thing in the inside |
| Answer: | Yes it will stick to it as long as it’s somewhat clean and dry. |
| Question: | can this be used outside as a greenhouse thermal blanket |
| Answer: | Yes, there is one sheet per box |
MWS 1000sqft Radiant Barrier Solar Attic Foil Reflective NASA Insulation 2x500 perf
Product description
MWS 1000sqft Radiant Barrier Solar Attic Foil Reflective NASA Insulation 2x500 perf
User questions & answers
| Question: | Can you staple it on walls |
| Answer: | I certainly did, as stated in my review. Unless the product has been changed significantly since I purchased it in 2012, I would avoid it. Hopefully someone who purchased this more recently can give you an update on the odor situation. |
| Question: | Is this good for an attic crawl space to keep heat out and air conditioning in during the summer |
| Answer: | While not originally intended for this purpose there is no reason why this would not work. If it was a metal door it would be more effective, but as long as the surface is clean it will adhere. Make sure you use a hard rubber roller to roll it in. This is an important step. If this is not effective enough you can double it up with another layer or add their other products over it. Hope this helps! |
| Question: | Is this perforated |
| Answer: | Yes, this material will block outside noise from coming into the cabin. That is noise like raindrops hitting the roof/ceiling. I'm assuming you mean for a car? If you're talking about a house/home, then yes it will also dampen noise coming from above if applied to the majority of the affect area/ceiling. However if for a house this might get expensive considering the cost of Dynamat and you might want to check for a alternative cheaper brand from home Depot. |
| Question: | Can this be used for the craw space walls |
| Answer: | It’s mostly to stop the reverberation noise coming from sheet metal panels, adds weight to the panel to stop it from moving around as much, blocks exterior noise as well but for what you’re looking to do I don’t think it would be as effective as an acoustic foam would be. |
US Energy Products 2 Car Garage Door Insulation Kit (5 Panel) for Double 18x7 or 18x8 Garage Doors with 5 Horizontal Panels
US Energy Products
Product description
2 Car Garage Door Insulation Kit (5 Panel) for Double 18x7 or 18x8 Garage Doors with 5 Horizontal Panels, R value 8
User questions & answers
| Question: | My garage door panels are 18" tall, will I have to trim the panel to fit |
| Answer: | Yes it does..Class 1 vapor retarder |
| Question: | In the description it says double, does this mean two layers? I’m looking to sound proof my garage as much as possible without remodeling. Thanks |
| Answer: | yes this great for a floor underlayment has r value and reflects heat transfer |
| Question: | Does this kit include the new advanced tape as in the similar products by trade winds/us energy products |
| Answer: | I am currently putting this inside my tiny house. Stapling it to the studs. One side is silver so keep a half inch gap of air space between the silver side an the wall or ceiling. 😁 |
| Question: | Does this allow the automatic door to freely open and close |
| Answer: | Yes the white is a very popular application for this purpose |
Reflective Foam Insulation Heat Shield Thermal Insulation Shield 48"x4ft
AES
Product description
Made in the USA Product: Foam Core laminated between two layers of highly reflective radiant barrier foil. Contact Temperature Range: -60°F To 180°F (-51°C To 82°C) Water Vapor Transmission: .02 Perms**** Puncture Resistance: 60 Lbs. Per In.*** Pliability: No Cracking Linear Shrinkage: None Mold And Mildew: No Growth Flame Spread: 0 Astm E84-08 Smoke Development: 40 Astm E84-08 Fire Rating: Class A / Class 1 Reflectivity: 95% Motor Vehicle Safety Standard 302: Zero Surface Burn Rate Emittance: 0.04**** Benefits: 100% Made in USA Only Energy Star Rated Foam Core Reflective Insulation on the planet!!! Blocks radiant heat by up to 95% Reduces Heating and cooling loss Foam Core Sound Reduction Technology Saves you Energy and Money Easy to use and install Requires no protective clothing or special tools Requires no maintenance Highly Durable, Lasts Longer Meets new ASTM Fire codes
- One layer closed-cell foam bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599
- Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail, glue or use a spray adhesive to hold in place! No mess, and no itchy fibers!
- Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Non-flammable, flame retardant
- Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. As well as provides benefits of soundproofing when used in walls, ceilings and floors. Can also increase your overall property value depending on use.
- Dimensions: (48 Inches wide by 4 feet long ), 7MM (5/16 In) thick,
User questions & answers
| Question: | Can this be used as skirting on a travel trailer |
| Answer: | yes contact cement / gorilla glue |
| Question: | can this be used over can lights in attic |
| Answer: | yes crawlspace and basements for vapor barrier has white finish |
| Question: | Would this work well to wrap/insulate a hot water heater tank |
| Answer: | yes very popular application waterproof class 1 class a fire rated radiant / vapor barrier / r value in one |
| Question: | What color is it? It looks like tan on one side |
| Answer: | R7 |
Double Bubble Reflective Foil Insulation (24 inch X 10 Ft Roll) Industrial Strength, Commercial Grade, No Tear, Radiant Barrier Wrap for Weatherproofing Attics, Windows, Garages, RV's, Ducts & More! .
US Energy Products
Product description
Two layers of polyethylene industrialized air bubbles bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599. Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail or glue into place! No mess, and no itchy fibers! Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. (24 Inches wide, 10 feet long ),
- Two layers of polyethylene industrialized air bubbles bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599.
- Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail or glue into place! No mess, and no itchy fibers!
- Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents.
- Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round.
- Made in USA / Ships from USA / Meets all International and USA Fire Codes / Nominal thickness is 1/4 inch.
User questions & answers
| Question: | Having condensation issues on our well presssure tank? Would this be a possible solution |
| Answer: | yes this is a double sided waterproof radiant barrier |
| Question: | I want to glue this product to the black roof of my 93 camaro. then i want to glue the headliner to the bottom of the insulation. will it work |
| Answer: | yes very popular applcation use gorilla glue spray |
| Question: | Can this product be used under a matress on an RV pop out camper to prevent moisture buildup |
| Answer: | yes very popular application |
| Question: | Is this as good as using Mylar for winter cat shelters |
| Answer: | I was looking at it as an insert for a polyester fleece bed for outdoor stray cats. I stuff it with plastic grocery sacks above and below the mylar(?) thermal bubble wrap. Is there another way, like lining the pet house? I had never thought of that. |
Reflective Insulation Shield, Heat Shield, Thermal Insulation Shield 16"x50ft, 16''x100ft, 24"x50ft, 24"x100ft, 48"x50ft, 48"x100ft. (16" x 25FT)
Product description
Size 16 inch x 25 feet Strong but lightweight (1/4 inch thick) Fire Rating Class 1 / Class A (Meets all Fire Codes) Unaffected by humidity and moisture (Waterproof) NON TOXIC, WILL NOT IRRITATE SKIN, EYE OR THROAT Will not lose its performance and provides Made in the USA Double Sided Foil with Closed Cell Poly Foam Core Inside
- Strong but lightweight
- Astm Certified Class 1 Class A Fire Rated
- Water Proof Double Sided Metalized Film Foam Core Material
- NON TOXIC, WILL NOT IRRITATE SKIN, EYE OR THROAT
- Will not lose its performance and provides vapor barrier
User questions & answers
| Question: | Can this be used behind a hot-water radiator to redirect heat back into the room |
| Answer: | YES |
| Question: | What is the thermal range of this product, it says heat shield but to what temp |
| Answer: | YES ITS A HEAVY DUTY SCRIM REINFORCED RADIANT BARRIER |
| Question: | What’s the r value |
| Answer: | YES |
| Question: | self-adhesive |
| Answer: | YES VERY POPULAR FOR CRAWLSPACE WALLS |
Latest Reviews
View all
Pc Tower Cases
- Updated: 15.06.2023
- Read reviews
Medium Suitcases
- Updated: 25.03.2023
- Read reviews
Camp Showers
- Updated: 25.04.2023
- Read reviews
Bro Shirts
- Updated: 29.06.2023
- Read reviews
Atlantic Cheap Tables
- Updated: 27.01.2023
- Read reviews