10 best roofing paper

Product description

DuPont Tyvek Protec 120 Roof Underlayment is an engineered synthetic roofing underlayment with industry-leading walkability. It is ideal for slopes 2:12 or higher and can be used under a variety of roofing materials, including asphalt shingles, cedar or metal roof cladding. The four-layer construction offers high performance with a slip resistant coating gripping it to the roof, woven polypropylene giving it strength, a water barrier layer, and grooves on the top layer expelling water and dirt to provide a safer work environment. It is wrinkle-free, easy to chalk, protects the roof during installation as a moisture barrier and withstands UV exposure for up to 3 months. It is trusted protection that can give both professional builders and homeowners greater peace of mind. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Compatible with roofs with asphalt shingles, cedar shingles and metal roofs
• Use for repair, re-roofing and new construction applications
• Trusted quality and durability from DuPont Tyvek
• The unique embossed pattern allows for better traction and grip while walking on the roof

User questions & answers

Question:	What else is needed for installing tyvek protec underlayment
Answer:	Yes, it will work to protect your wood from water but I believe I remember reading it is not to be used as a vapor wrap. The recommendation is to double up on low pitch roof so keep that in mind. Also, if you get moisture trapped behind it, it might be bad so the wood needs to be dry. You affix with plastic head nails. No glue.
Question:	Cuanto mide el rollo
Answer:	Yes, our product will work just fine in this application.
Question:	can this be used with concrete tile
Answer:	Yes this would seal exterior wood. I have used it on wood slab benches outside and it’s incredibly slick to walk on when wet. Epoxy is more for boat trim not for sealing docks. You’d be better off with an oil. Plywood bubbles in direct sun when it has moisture in it. Trex it if able.
Question:	Is this product waterproof
Answer:	Absolutely. Thats how its supposed to be

Product description

Trimaco does not and cannot foresee all potential uses of this product nor the potential damages arising from its use. Red Rosin is dyed paper, use caution on light colored and delicate surfaces. Bleeding of color may occur when wet. Test before use. Trimaco makes no warranties of any nature or description, either express or implied, regarding the product including, without limitation, the warranties of quality, performance, merchantability, or fitness for a particular purpose or use. By purchasing this product, you understand and agree that UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY (TORT, CONTRACT, OR OTHERWISE) SHALL TRIMACO BE LIABLE TO YOU OR ANY OTHER PERSON OR PARTY FOR DAMAGES OF ANY KIND OR NATURE INCLUDING, BUT NOT LIMITED TO, ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OF ANY CHARACTER WHATSOEVER, ARISING OUT OF THE USE, PERFORMANCE, OR FAILURE TO PERFORM, OF THE PRODUCT.

• 36” x 167’ roll
• Provides 501 square feet of coverage
• Provides superior moisture barrier
• Ideal for flooring and roofing tasks

User questions & answers

Question:	Does this rosin paper have small white spots, and some dark spots? If so, then this is what I want
Answer:	This paper does have a heathered appearance to it. There is some slightly lighter and darker woven throughout the paper.
Question:	What color is this paper? Red or brown
Answer:	Odd color, more red than brown though.
Question:	Does this work on carpet stairs
Answer:	It will as long as the stairs are masked properly.
Question:	Is this harmful to exotic birds and dogs
Answer:	Just seems like thick paper to me.
Question:	so is one side brown, the other side white? Is this comparable to 30 lb roofing felt or thicker? my purpose is an old car trunk lid sound deadening
Answer:	This is not felt. It is metal
Question:	Is this the same thing as roofing felt
Answer:	No. I thought it was felt as well. It is metal flashing material.

Product features

Temporary Floor Protection

When it comes to surface and floor protection, you can't beat Trimaco's flooring paper. Our professional grade papers will protect a wide range of surfaces including hardwoods, vinyl, laminate, concrete, carpet and more. From traditional red rosin paper to 50lb flooring paper, our selection of paper will provide superior protection on the job.

Builder's Paper

• Brown flooring paper
• Ideal for low traffic areas
• Protects floors, stairs, countertops and more
• Temporary floor protection during construction
• 100% recycled
• Made in the USA

Red Rosin Paper

• Dyed paper
• Great for flooring and roofing projects
• Can be used as a moisture barrier
• Available in heavy weight and regular weights
• 100% recycled
• Made in the USA

White Top Construction Paper

• Use brown side up, white side down
• 50% heavier that rosin paper
• Features high tech fiber coating
• Can be used to protect hardwood floors, tile, concrete, vinyl and countertops.

50lb Flooring Paper

• Lightweight flooring paper
• Alternative to red rosin or builder's paper
• Ideal for protecting floors, stairs, countertops and cabinets
• Made in the USA

Product description

Ant jam' Design for maximum productivity. Long reach knuckle saver handle with non-slip comfort grip. Die-cast frame and hardened components for extreme durability. High capacity bottom load MAGAZINE with staple count indicator. Extra wide foot plate prevents tearing and marring. Uses STCR5019, SK..More.

From the Manufacturer

From its extreme durability to ergonomic comfort, the Bostitch PC2K Power Slam Hammer Tacker 1/4-Inch to 3/8-Inch Manual Construction Stapler meets every expectation a contractor could place on a hammer tacker. In fact, it was recently selected as the Tool Test winner by Tools of the Trade Magazine. Bostitch achieved its surprising durability thanks to features such as a heavy duty die-cast frame and reinforced sides. Its heat-treated internal components are essential to long-life performance. The unit features an anti-jam mechanism so effective that users can often drive staples directly on top of each other without experiencing a jam. Even if the occasional jam occurs, users can expel it in a matter of seconds by flipping the unit over and striking the head against a hard surface. Weighing only 2.2 pounds, the PC2K touts ergonomic excellence with a non-slip comfort grip and long-awaited knuckle saver handle to avoid the pain of smashed fingers and scratched knuckles. The PC2K's high capacity magazine stores up to two sticks of staples (168 staples) ranging from a 1/4 to 3/8 inches long. Its fast bottom-loading mechanism and reload indicator helps the user minimize reloading downtime while monitoring the staple count with only a glance. Unlike competitive hammer tackers, the PowerSlam's fixed pusher does not fall out, which eliminates the risk of losing it on the jobsite.

• The product is Pro hammer Stapler
• Easy to use
• The product is manufactured in China
• Long reach knuckle saver handle with non slip grip
• Uses STCR5019 series Power Crown™ staples from 1/4 to 3/8 inch; high Capacity bottom load magazine
• Die cast frame and hardened components for extreme durability
• Exclusive long reach knuckle saver handle with comfortable non-slip grip
• 7-year warranty

User questions & answers

Question:	Will it fasten into hardwood flooring with out jams
Answer:	Considering your small target, and possible flooring damage, think about renting or buying the dedicated tool, flooring stapler, air or electric. This guy is excellent for siding/roofing paper.
Question:	Hi, does this stapler take 3/8" Wide (not length) staples
Answer:	Go visit the Bostitch website for a reliable answer.
Question:	will this work with 1\2 in crown by 1\4in leg staples
Answer:	No, it would be specifically for 7/16th crown with the following models of staples. STCR50191/4 BOSTITCH PowerCrown™ 7/16” 1/4” (6mm) STCR50193/8 BOSTITCH PowerCrown™ 7/16” 3/8” (9mm) STCR50191/2 BOSTITCH PowerCrown™ 7/16” 1/2 (12mm)
Question:	Does this stapler take Arrow T-50 heavy duty staples
Answer:	No, Uses STCR5019 1/4”, 3/8”, 1/2” STAPLES

Product description

Brown Rosin Paper by Plasticover is a high quality, single-ply protection paper commonly used to protect floors, windows, counter tops, fixtures and many other surfaces during construction and remodeling.  It can also be applied as an inner lining "sheathing paper" in walls, roofing, or wood flooring applications to protect against wind and dust infiltration, while minimizing squeaks.  The natural brown color contains no dye, Brown Rosin Paper by Plasticover is a high quality, single-ply protection paper commonly used to protect floors, windows, counter tops, fixtures and many other surfaces during construction and remodeling.  It can also be applied as an inner lining "sheathing paper" in walls, roofing, or wood flooring applications to protect against wind and dust infiltration, while minimizing squeaks.  The natural brown color contains no dye, which can be important when protecting delicate surfaces on a job when moisture is expected.

• Same protection as red rosin paper but in brown
• Simple to use - just roll it out, trim to fit and tape the seams
• Single-ply protection from 100% recycled fibers
• Covers gaps in jointed construction to tighten up structures
• Protects: floors, counters, fixtures, fireplace mantels and more

User questions & answers

Question:	selling house,want to put down a paper runner to keep carpet clean when showing house, will this work with some paint tape holding it down
Answer:	Hi there, the tape will either not hold it down or leave a residue. A specific product for carpet like this one is much better for your use: https://www.amazon.com/gp/product/B005FSIP8Q/
Question:	Is this used for hardwoon floor underlayment
Answer:	I don’t believe so. We used it to cover the floors during our remodel.
Question:	How thick is it...10mil ?? Thanks
Answer:	Not sure of the mil. It's thick, almost construction paper, thicker than butcher paper.
Question:	Does the color bleed when it gets wet? I have seen others that have stained the floor beneath and want to be sure this does not have that issue
Answer:	We used leftover paper to cover the kitchen table when the kids dyed their Easter eggs. It didn't bleed, fade or anything along those lines. I hope that helps.

Product description

The ROBERTS Silicone Moisture Barrier Underlayment was designed to protect floors from moisture, without trapping it underneath the floor covering. Silicone Moisture Barrier is made from repurposed paper that is environmentally safe and made of 100 percent recycled contents. Install with the smooth side up, for easily marking chalk lines and sliding planks into position.

• For use with staple and nail down installations of solid and engineered wood floors
• Reduces vapor flow without trapping moisture
• Meets perm ratings recommended by the National Wood Flooring Association
• Lab tested and approved for use with radiant heat systems
• Convenient 33.5 in. x 72 ft., 200 sq. ft. roll
• 6 mil wet strength paper and silicone coating ensure SVS will not fall apart during installation

User questions & answers

Question:	Can this be used for laminate installation
Answer:	Hi Our silicone vapor shield is designed to be use with staple or nail down installations or solid and engineered wood floors thank you
Question:	Will this product work with porcelain floor tile
Answer:	No. You need hard surface like cement board or better yet an underlayment from Schluter Ditra
Question:	Why is Amazon only allowing me to purchase 6? I need 20 for my floor
Answer:	Looks like there are only 6 in stock as of 11/18/19.
Question:	Can I use this as a woodshop work table cover? Will wood glue stick to it
Answer:	It's very slick on one side I don't think wood glue would stick to it I think it would work

Product description

Already assembled with a ring shank nail. Round plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, etc. Bulk box. The Product is manufactured in China.

From the Manufacturer

Grip-cap nail primarily used for anchoring house-wrap, sheathing and felt paper. Wide head and ringed shank for greater holding power. PrimeSource Building Products, Inc. is the largest purveyor of fasteners in the world and one of the largest distributors of building materials in the United States.

• Product is manufactured in China

User questions & answers

Question:	What material is the nail made of
Answer:	The nail is galvanized steel.
Question:	Are the nails 1 1/2 inches long
Answer:	I believe they are. Worked well for posting signs.

Product description

Already assembled with a ring shank nail. Round plastic insulation caps. Used for fastening foamboard, roofing felt, insulation, house wraps, film, etc. Bulk box. The Product is manufactured in China.

From the Manufacturer

Grip-cap nail primarily used for anchoring house-wrap, sheathing and felt paper. Wide head and ringed shank for greater holding power. PrimeSource Building Products, Inc. is the largest purveyor of fasteners in the world and one of the largest distributors of building materials in the United States.

• Product is manufactured in China

User questions & answers

Question:	Will 1" nail penetrate flashing
Answer:	Yes,but I would use 1-1/2" for better penetration into underling shingles
Question:	how much area will 2000 cap cover putting down 10 sq. synthetic felt
Answer:	what spacing will you be using?
Question:	How much of the nail protrudes below the plastic cap? I have 3/4" roof sheating and I want to make sure the nail doesn't penetrate through
Answer:	It is a 1" nail, so it will penetrate enough to cause the underside to split around the nail. you probably should look for a 3/4" long nail with the plastic cap.
Question:	how is this packaged? 2000 in one container or spread out over multiple containers
Answer:	2000 loose in one cardboard box. It was a surprise to us! Just wasn’t expe ting it that way. Have since relocated them to better serve our needs.

Product description

PACTOOL IS NOW PART OF GENERAL TOOLS



PacTool International, manufacturer of exterior construction tools such as siding installation gauges, cutting and roofing tools is now part of the General Tools family. Together we provide both interior and exterior home improvement professionals and DIYers with an extensive product line of best-selling, quality tools that can be counted on when building, restoring and maintaining a home.



For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed.



WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

 

Replace composition shingles easily and accurately with PacTool’s Roof Snake! With its unique offset nail-slot feature, the Roof Snake Shingle Nail Puller, Roof Shingle Installer helps you align new nails with the proper one-inch offset from the bottom-edge of your existing course. It also lets you install new shingles without over-bending or striking surrounding shingles (or fingers) with your hammer. Add the roof snake to your tool collection and make composition shingle replacement a whole lot easier!

Roofers, plumbers, and siders, take the bite out of replacing shingles with Roof Snake. This handy tool allows you to nail replacement 3-tab style shingles into place without damaging the shingles on the row above, and it provides you with a useful tool for removing nails from roof shingles. Simply drive the claw end under the nail, and roll the nail out by twisting the Roof Snake.

From the Manufacturer

Roofers, plumbers, and siders, take the bite out of replacing shingles with Roof Snake. It allows you to nail replacement three-tab style shingles into place without damaging the shingles on the row above, and provides you with a handy tool for removing nails from roof shingles. Simply drive the claw end under the nail, and roll the nail out by twisting Roof Snake.

• Your best friend for roof shingle replacement! The roof snake makes replacing composition shingles safer, easier and more accurate than traditional methods
• Patented offset nail-slot feature –unique design helps you align roofing nails with the proper one-inch offset from the bottom edge of your the existing Course
• Damage-free shingles - replace and install 3-tab shingles without over-bending or striking surrounding shingles (or fingers! ) with your hammer
• Claw tip – shingle nail puller claw removes nails easily from roof shingles. Drive the claw end under the nail and roll the nail out by twisting the roof snake
• Essential tool for roofers – the roof snake takes the bite out of replacing shingles to start and finish the job The right way

User questions & answers

Question:	There are devices that will pull the nails well enough for about 4 bucks, if you have a gun do you get any value from the nail setter
Answer:	Yes, it can definitely pull pneumatic staples, maybe even better than nails some times
Question:	What is the difference between 1-(pack), (improved.) and single pack? they all look like the same product with widely different prices
Answer:	this tack puller works great doing the job its intended to do, however I will say I was pulling out panel nails and it was not thin enough to get under without damaging the panel wood. Lucky for me I didn't care. not sure there is a tool thinner but good luck.
Question:	Does this work well with the ridge cap shingles
Answer:	Somewhere deep inside the bowels of an Amazon warehouse, a screw driver and a week puller met, fell in love and whalah, ya got yourself one of these things. But - in this case you got twins...and they're so cute, not terribly useful, but they don't eat much and generally stay in their drawer without complaining too much. Hope that helps, next question...........
Question:	Will this not work on architectural shingles
Answer:	Probably

Product features

The Roof Snake - Shingle Nail Puller, Roof Shingle Installer

Your new best friend for shingle replacement.

With its patented offset nail-slot feature, the Roof Snake helps you align new nails with the proper one-inch offset from the bottom-edge of your existing course. It also lets you install new shingles without over-bending or striking surrounding shingles (or fingers) with your hammer.

Replace Shingles

With the Roof Snake, you can easily and accurately replace roof shingles.

Nail Pulling End

The claw tip of the Roof Snake enables you to remove nails without damaging shingles.

Nail Slot Feature

The nail slot feature replaces the flat bar.

Product description

The Freeman PLDHT Light Duty Hammer Tacker is lightweight, portable and powerful, making it ideal for roofing, insulation, carpet padding, upholstery and poly sheeting installation. This rugged staple gun has a durable all-steel construction, with an ergonomic comfort grip handle making it easy to use while minimizing fatigue or injury. DIY home improvement and repair projects as well as professional jobs are a breeze to fly through with this reliable stapler. It uses Arrow T50 Staples, Stanley TR150HL Staples, and generic brand fasteners. A pack of 1, 250 count 3/8 inch Arrow T50 staples is conveniently included with the purchase of this light duty staple hammer, making it easy to get working.

• Great for roofing, insulation, carpet padding, upholstery, and poly sheeting installation
• Compatible with Arrow T50 and Stanley TR150HL staples 1/4", 5/16", and 3/8" in length
• Lightweight, portable, and powerful for use at the job site
• Ergonomic comfort grip handle for easy single hand use
• Durable all-steel construction for DIY home improvement projects and professional jobs

Product description

Mfm Building Product 50042 6"X33.5' Peel & Seal

• The product is manufactured in united states

User questions & answers

Question:	Will this product stick to concrete and is the color a dull aluminum
Answer:	I applied it to cinder block, and after nine months it seems to be doing the job. I would describe the finish as approximating the dull side of a sheet of aluminum foil. I had two rolls one was a smooth finish and the other was a wrinkle finish. I took what they gave me...
Question:	Is this tape sticky on both sides? Is it suitable for use between two asphalt shingles to prevent wind lift
Answer:	It's just sticky on one side..the other side is an aluminum type paper...I don't think it would be good for shingles but I'm not sure how you plan to use it....maybe look into that roof asphalt that comes in a can..
Question:	How to you cut this to size? Thanks
Answer:	scissors, knife !!! cuts easily
Question:	How many rolls are in this? It says “6” by t is that the quantity or the inch size
Answer:	Just one roll that is 6 inch wide 25 ft long