12 best attic stairways
Attic stairways, also known as attic ladders or attic stairs, are retractable stairs that provide access to an attic space from the lower levels of a building. They are often installed in ceilings and typically fold or slide into the attic when not in use. Attic stairways are essential for accessing the attic for storage, maintenance, or other purposes.
When it comes to weatherproofing and insulation, attic stairways can be a potential source of heat loss or gain in a home. If not properly sealed and insulated, they can allow air leakage, which can affect the overall energy efficiency of the building.
To address this issue, homeowners often use weatherproofing and insulation techniques. Window insulation kits can sometimes be adapted to seal and insulate attic stairways. These kits usually include plastic film and double-sided tape that can create an airtight seal around the attic stairway opening, helping to reduce drafts and heat loss.
In the context of HVAC (heating, ventilation, and air conditioning), properly insulating and weatherproofing the attic stairway can contribute to more efficient HVAC system operation by maintaining a more consistent indoor temperature.
Regarding building supplies and tools for attic stairways, you may need items such as insulation materials, weatherstripping, sealants, screws, and appropriate tools like utility knives, screwdrivers, and measuring tape. These tools and materials are used to properly install and seal the attic stairway, ensuring it is energy-efficient and airtight.
In summary, attic stairways are crucial for providing access to attics. Weatherproofing and insulating them are important steps in maintaining energy efficiency within a building, contributing to better HVAC performance and reducing energy costs. Utilizing window insulation kits and appropriate building supplies and tools can help achieve effective weatherproofing and insulation for attic stairways.
Below you can find our editor's choice of the best attic stairways on the marketProduct description
Have your utility bills been going through the roof?
Protect yourself with an effective heat management solution by easily installing our Attic Stair Cover Insulation
- DOUBLE AIR-BUBBLE INNER LINING: Gives a thickness of 6mm of heat reflecting material to bounce off the heat radiating from either side (Winter or Summer months).
- EXTREME R-VALUE INSULATION: Delay conductive heat movement by resisting heat flow to transfer through your attic opening by using our multi-layer insulation.
- REFLECTIVE FILM OUTER LAYERING: The durable aluminum layers create a water, humidity and moisture-resistant barrier allowing you to breathe and live more comfortably in extreme outer weather conditions.
- FEEL THE DIFFERENCE IMMEDIATELY: Experiencing hot or cold air rushing through the attic opening? After installing the insulation properly that will stop instantaneously
Lightweight Material
Easy to handle and install with a staple gun (staple gun not included)
Sewn seams for added strength and longevity
Easy to use zipper for quick access to and from the attic
- ATTIC COVER with EXTRA THICKNESS: The highest quality wall thickness in the market will protect your house from air leaks during the summer and winter months and reduce your bills drastically
- DIMENSIONS FOR: 25" x 54" x 11" attic hatch opening. This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden in the attic.
- ATTIC INSULATION EASY ZIPPER: Allows easy entrance and exit to the attic when climbing up and down your pull down attic stairs.
- DIPPING ENTRANCE: Our custom insulator was created with a shallow entrance point that will allow your climb up and down to be safe and easy.
- At Miloo we are committed to producing quality products that we know you will love. If for any reason you are not completely satisfied, contact us so that we can be of assistance.
User questions & answers
Question: | What is the R value |
Answer: | My product zipper also broke. In the process of contacting the seller now. |
Question: | What is the actual officially stated R-value |
Answer: | The maximum safety height of this kind ladder is 9.2ft/2.8m. And the maximum vertical height of the other style is 9.8ft/3M, asin is B07SSY5ZSS. Sorry to tell you we don't have 10.5 feet ladder. Regards |
Question: | R-value says r-value 15.3 but below q&a says 5 can anyone confirm this |
Answer: | Yes, it included. After installation this two separate steps, the maximum vertical height is 9.2ft/2.8m . And this is the maximum safety height. Regards |
Question: | How does it secure to the inside of the opening? Will I need a staple gun |
Answer: | Total width: 54cm/21.3in. Size of steps: 40 x 14 cm/ 15.7 x 5.5 in. Best regards |
Product description
Home’s energy costs gone through the roof? Whether you’re worried about wasted heat, icy infiltration or everyday accessibility, this Attic Stairway Cover from RightHand provides an all-in-one overhead solution. Designed for most standard hatch openings, the 25” x 54” x 11” tent creates a formidable barrier between your unfinished attic space and lower areas of the home. By preventing air transfer and blocking out humidity, you save hundreds in annual HVAC costs while keeping occupants safe and comfortable through all seasons and weather conditions. Class-A fireproof bubble aluminum is lightweight, flexible yet super durable, ensuring many years of dependable insulating performance. You also enjoy a bonus roll of polyfoam tape, which—when applied to the edges—helps stop air from escaping along the tent’s seams. Need to get upstairs in a jiffy? Just pull down the ladder and unzip the access panel for easy entry. There’s no need to wait for another heat wave or cold front. To lock in your savings, add the RightHand Attic Stairway Cover to your cart today!
- DELUXE ATTIC STAIRWAY COVER SYSTEM | Kit Arrives with Everything You Need to Redirect Radiant Heat & Block Cold Air Drafts from Entering Your Home’s Main Living Spaces | Large 25” x 54” x 11” Model Fits Most Standard Hatch Openings
- CLASS-A FIREPROOF BUBBLE ALUMINUM | Highly Durable Reflective Material Serves as a Reliable All-Weather Shield While Remaining Lightweight & Easy to Maneuver | Blocks Heat During Warm Weather & Prevents Heat Loss During Cold Weather
- QUICK INSTALLATION & ACCESS | Easily Installs Over Opening to Folding Attic Stairs, Knee Wall Doors, Attic Scuttle Holes & Other Structural Situations | Heavy-Duty Zipper Access Flap Allows for Swift Entry & Exit While Keeping the Cover in Place
- 17-FOOT INSULATION TAPE INCLUDED | Roll of Insulating Polyfoam Tape Helps Secure the Tent’s Edges to the Attic’s Frame Opening, Creating an Additional Air Barrier | Isolate Indoor & Outdoor Temperatures Without Expensive Insulation!
- SAVE HUNDREDS ON HVAC COSTS | Eco-Efficient System Lowers Your Annual Energy Bills by Protecting Home from Extreme Temperatures & Humid Environments | 100% Fire Retardant, Sound Proof, Dust Resistant, Waterproof, Easy to Clean & Store!
User questions & answers
Question: | Define righthand and this term relates to the tent |
Answer: | ...Griffen, he was the original o.g, the triple diple o.g, the double o. capital .g, the Ompa Oprah talk show host of his time! HEEEERRRRRRREEEEE'SSSSS...MERV!! I'm just kidding! It stands for; "Minimum Efficiency Rating Value" There are 1-16 ratings with "1" being the worst and " 16" of course being the best! I tend to get the MERV11 in a 4" thick pleated filter because it traps everything I'm most worried about like dust, mites, pet dander, bacterias, allergic pollen and when my daughter cooks or burns something in the oven, kitchen smoke! Keeping all that "sheet" out of the distribution process of hot/cold air being deposited throughout the many registers in my house not only protects my family, but it helps to prolong the system and house by keeping it all clean and dust free!! Don't skimp when it comes to selecting that MERV rated filter or you may end up replacing more than just the filter. Read the specs on the system you own to be sure you're using the correct size filter and change it every six months or less depending on your environment. |
Question: | What is the R value of this setup |
Answer: | You would need to purchase a very special type of filter if yours is 4 inches typically those are made by Honeywell international you do not ever stack filters together you will ruin your blower motor because of the back pressure it will create trying to push through four separate filters versus one specially designed for inch filter |
- ✅【Attic Insulation Cover】Attic Door Insulation Cover works during the entire year, hot summers and cold winters; Creates a seal at the attic door to prevent dust or pollutants from entering your home.
- ✅【Attic Insulation Tent】This Attic Stairs Insulation Cover is made with premium foil bubble insulation inside to provide you with all-year-round energy savings insulating performance. Fits openings up to 25" x 54" x 11".
- ✅【Fireproof Material】Constructed of 2 layers of Aluminum and the air bubble in the second layer helps in blocking the heat transmission, reflects 97% of radiant heat, provides an R-Value of 14. 5. Premium material protect your house from affecting by moisture or humidity. Make your life more comfortable and health.
- ✅【Easy to install】Zipper access and simple installation. To install, simply place the attic door insulation cover in your attic door opening and staple it to the door frame.
- ✅【Attic Ladder Insulation Cover】This attic door insulating cover will keep your home cool and dry in the summer and warm and dry during winter whilst saving you on power bills. Our high quality Attic Cover is very effective at controlling excess heat during the summer and winter.
User questions & answers
Question: | opening is 261/2 X 54 1/4 will it still work |
Answer: | It should be okay! But the edge position may need to be dealt with. |
Question: | Will this fit attic opening without pulldown ladder |
Answer: | I believe it should since the cover extends several inches "above" the attic opening. My ladder fits comfortably inside the cover when closed. |
Question: | Is there a kit for 20.5 inch openings |
Answer: | I looked around and didn't see any. Sorry. |
Question: | If I use my attic for storage, will this make it difficult to get things in and out |
Answer: | It would make it more difficult for larger items because it protrudes above the attic floor when installed. |
Question: | When are you bringing back the telescopic ladder? This “compact” style doesn’t work if you do t have a lot of empty space inside your attic |
Answer: | Yes |
Question: | Is it attached to the door |
Answer: | nope.. if it were it might come down when you pull the door down... as said it attached to the floor of the attic which also saves space...you are given a bar with a plastic hook to pull it down.. works really well.. |
Question: | what ladder is suitable for vertical position |
Answer: | I can only say that without modification, the spring mechanism will not allow vertical retraction. Mines served me well although a bit flimsy, is equally as light, compact and functional. I'm 185, I couldn't recommend it for anyone over 220. |
Question: | I have a 30x30 rough opening and a 8' ceiling. Will this ladder work? Also, what is the quality of the ladder |
Answer: | Yes, it should work provided that the other clearance requirements are met (it does require some space above and behind the attic opening where the ladder sits when it is stowed).The ladder is on the light weight side. I weigh @ 220 and I feel like I am about as heavy as could use it. |
Question: | Is this ladder fire rated for garage installation? This is requirement in California |
Answer: | it is not fire rated. |
Question: | My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center |
Answer: | Should fit...on center means center to center. So 24" on center is 22½" in between. |
Question: | Will the L22 4P fit in a 22" opening |
Answer: | Yes, but it's a tight fit. The wooden frame is 21 3/4" wide, so while it will fit in a 22" joist bay, there's little tolerance for adjustment. Your joists had better be parallel in both directions. Mine were a little out of whack in both directions, so I had to make tapered shims to compensate. One hint: check for squareness of the assembly by closing the stairs and seeing if the door cover (presumed to be a rectangle) lines up. |
Question: | I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs |
Answer: | Rather than risking your safety and welfare on an old unit, buy a new one. The ladder wood dries out with heat and old age, the hardware gets bent and loose. Probably one spring broke so they removed the other. How does it stay closed with no springs? My hardware and spring arms were getting very loose and the steps would crunch when you stepped on them from being dry. Weigh the risk $86 and free shipping for a new unit. At least that's what it was when I bought mine. Every time I use it now I ask myself why didn't I do this 15 years ago |
Question: | What is the country of origin |
Answer: | Hi It is made in China. |
Question: | Can the exchanger be used with hot glycol |
Answer: | Hi, My Friend Yes, It can be used with hot glycol. |
Question: | Do you have the 16x18 in stock |
Answer: | Hi,Bruce We don't have 16*18 in stock currently, but we can customize for you if the order quantity is more than 10 pcs. |
Question: | Do you provide fans for these rads |
Answer: | Hello, Unfortunately, we don't have fans for this unit. We recommend using a heat pump's fan through open the vent of the heat pump. |
Product features
Information
20x20 Air to Water Heat Exchanger Port Size: 1" Capacity: 160,000 Btu/hr Rating: 175psi @ 350F Min. Working Temperature: 32F Max. Working Temperature: 350F
Specifications
Min. Working Temperature: 32F Max. Working Temperature: 350F
Design Pressure: 175psi Test Pressure: 263psi
Applications
Residential and Commercial Heating and Cooling Apartment and Condominiums Heating and Cooling Forced Air Heating Hybrid Systems Air Conditioning Dehumidification Inverter Cooling
Details
Fins: 12 per inch, aluminum Coils: 3 rows of 3/8",
seamless copper Materials: Galvanized Steel (core housing),
Copper (coils),
Aluminum (fins) Dimension: 20" x 20" x 3.5"
- Double bubble reflective radiant barrier (or xpe/epe foam)
- Energy efficiency: Our attic door insulation cover works during the entire year, hot summers and cold winters; It prevents air, dust or pollutants leakage into your home
- Installs in minutes: This attic insulation tent product is essential, easy to handle and install, being a 3 DIY step product; It also weights only 1,80 pounds
- Compared with other products, our Attic stair insulation cover uses heavy duty and high quality zippers which allows easy access to and from the attic without struggle; If you want the best, this one is for you; Get it right now
- SAVE MONEY: Having a 15.3 R-Value and a major HVAC efficiency, it will help you to recover your investment just in a few months from the purchase; If you want to cut household costs, for sure you should insulate your attic access door
- Class A fire resistance product: Being designed by our experts from USA to meet the highest standards concerning it's manufacturing material, this attic door cover reflects 97% of the radiant heat and the air bubble in the second layer helps in blocking the heat transmission
User questions & answers
Question: | Due to my trusses I need to install this on the interior of the box so the opening with be 22.5 x 53. Would this cover still work |
Answer: | This appears to be correct. I would also contact them through email with Amazon once you place your order. Give them the exact measurement. I did receive my ladder and it will go up this week. I will Let you know how that goes. It did take about 4 weeks to arrive. |
Question: | what size are the stairs down the floor from the attic |
Answer: | Yes it is! Plus they have great customer service! They emailed me a few days after I received it to make sure I got everything I needed and that I was able to install it without any issues! I’d definitely buy from them again, if the need ever arises! Hope this helps! |
Question: | What size of staples is used for installing? also i see amazon suggest buying tape with it. is tape needed to help seal it |
Answer: | Actually the description says the R Value is as poor as 3. Not very good if you ask me. |
Question: | What size of staples is used for installing? also i see amazon suggest buying tape with it. is tape needed to help seal it |
Answer: | Yes. Just overlap corners. |
Product features
Do you have problems with both, hot and cold air, getting through the attic door seal?
Problems in your comfort home often start with the attic seal cover because of the poor insulation attic which is not enough or good enough in order to prevent the air leak which affects the heating and cooling system. Your attic access cover is vital to your home's health, and energy efficiency.
At Panady, we consistently invest energy and resources in our products!
For that reason, in order to fulfill the highest standards of the most demanding customers, because we do know for sure that little details are the ones that create a big difference, we developed this rigid structure attic tent cover being one of the first choices made by most of the professional insulation contractors in the USA, but also across Europe.
Our attic door insulator is a must for you and your home!
This high-end & premium attic insulation cover is specially-designed to insulate attic entryways and also helps in keeping your house clean by improving your indoor air quality.
- Made of Fire-Resistant material which has a double layer made of polyethylene bubbles that acts as an extra thermal barrier in order to prevent condensation.
- Having a 15.3 R-Value and a major HVAC efficiency, it will help you to recover your investment just in a few months from the purchase; If you want to cut household costs, for sure you should insulate your attic access door!
Works during the entire year!
- During the summer months, attic insulation helps block the flow of air, which can limit thermal heat transfer and prevent major temperature fluctuations in your home.
In the summer, having enough attic insulation helps keep cool air in your home, and it does it by not being heated by the hot air in your attic.
Not only does this item allow for a heat-resistant barrier between your living space and the attic area, but it can also keep insulation components from penetrating into your house, which can be very harmful while remaining deadly hidden.
- On the other hand, during winter times this attic door cover will efficiently keep the warm air in your house from being cooled by the cold air in the attic, preventing the “chimney effect”, which drives up heating bills and makes homes feel drafty.
But… what is the ‘’chimney effect’’?
The chimney effect occurs when hot air escapes quickly through the attic stairway, creating a vacuum that draws cold air in through air leaks in the basement and ground floor. Once this cycle gets going, it can make your furnace run around the clock while preventing your home from feeling truly warm.
If the entryway to your attic is properly sealed, the heated air will have nowhere to go and your home will stay warm. If the entryway isn't properly sealed, the heated air will move into your attic and out of your home, causing your home's heating system to work overtime to keep your home adequately heated.
Simple installation
Just fix it over the attic door opening and staple the cover on the frame of the door. (Stapler not included).
- 【Comfortable Temperature】Our high quality Attic Cover is very effective at controlling excess heat during the summer and winter. Reflects 97% of radiant heat, Provides an R-Value of 14. 5.
- 【Fire Resistant Material】Premium material protect your house from affecting by moisture or humidity. Make your life more comfortable and health.
- 【Easy Installation】Installs in minutes, time saving. All instructions are included in the package.
- 【Dipping Entrance】Our insulator was created with lower front opening that will allow your climb up and down to be much safer and easier.
- 【Dimensions for】Suitable for 25" x 54" x 11" attic opening, it stops the unwanted heat transfer from affecting the household by entering & escaping through the roof!
User questions & answers
Question: | Is the zipper easy to come off |
Answer: | Sorry, no idea i use a larger size - which usually measures 3/8” smaller than noted on L & W. |
Question: | My attic opening is 34 by 36 will this product work |
Answer: | The QR code identifies the kind of filter. I bought two sets of these from different retailers, one was MERV8, the other was MERV8 and MERV11 mixed together. Both included the MERV13 label inside the shrink wrap. Filterbuy either has consistently lousy quality control or is just scamming us. You can identify MERV13 by their folds, they are slightly fluffy-looking (like a sweater). MERV12, 11, 8 and lower are smooth and look more like folded paper with sharp edges. |
Question: | what is the R-value and why isn't it printed on the box |
Answer: | Hello, the battery model for our camera is NP-40. You can buy it on Amazon. |
Question: | Is it normal for some moisture/condensation to be on the foil material when the attic is very cold and the heat is on in the house |
Answer: | Yes, of course you can, you can save the video to your computer and upload the video to your youtube. |
Product description
Attic openings or pull-down stairs are rarely insulated and can be a source of significant energy loss. The Duck Brand attic stairway cover is a simple solution to seal attic stairway openings year-round, effectively blocking drafts and retaining room temperature. It’s easy to assemble and install, flexible and lightweight, and easily repositionable to allow attic access. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.
- Save energy costs by covering attic doorway openings
- Use in colder months to block drafts and warmer months to retain room temperature
- Seals attic Stairway openings up to 25. 5 in. X 54 in
- Easy to assemble and install
- Flexible and lightweight to easily reposition and still allow access to attic
User questions & answers
Question: | I know it's made for attic stairs, but can I use this for a simple attic access panel that's about 1/3 the area this is built for |
Answer: | There are Youtube videos. Most show spraying it with a hose in the opposite direction of the air flow. My experience, using soapy water in a tub, is from decades ago when my dad had a set-up with multiple 4 inch electrostatic filters, so I have no idea what is best now. My plan, when buying this, to try saving money and eliminating throwing away / shipping 12 disposable filters a year, is to check to see if there are any instructions shipped with the filter. If there are no instructions, I'll try the rinsing with the hose plan in the short term, and try checking with my furnace maintenance guy the next time he comes to check the system. |
Question: | How does this seal where it sits on the floor, and what is the tent made of? How thick is the tent |
Answer: | It does not make a difference which side the filter faces. It is symmetrical and cannot be installed incorrectly. Enjoy! |
Question: | Length and width is mentioned, but what is the height? My stairs are 13 inches high when retracted, will it fit |
Answer: | No the price is per filter. |
Question: | What is the r-value of this duck brand 286209 attic stairway cover |
Answer: | Amazon has at least one that is MERV 11. It's 2" thick. So the seller really doesn't know his own product or the competition. He said electrostatic filters are not MERV rated, but a lot of them really are if you look for them. This one is only 1" thick, so you can bet it can't possibly be better than about a MERV 5 |
- 【Insulation Tent】This Attic Stairs Insulation Cover is made with premium foil bubble insulation inside to provide you with all-year-round energy savings insulating performance. Fits openings up to 25" x 54" x 11".
- 【Fireproof Material】Constructed of 2 layers of Aluminum and the air bubble in the second layer helps in blocking the heat transmission, reflects 97% of radiant heat, provides an R-Value of 14. 5. Premium material protect your house from affecting by moisture or humidity. Make your life more comfortable and health.
- 【Attic Insulation Cover】Attic Door Insulation Cover works during the entire year, hot summers and cold winters; Creates a seal at the attic door to prevent dust or pollutants from entering your home.
- 【Attic Seal】This attic door insulating cover will keep your home cool and dry in the summer and warm and dry during winter whilst saving you on power bills. Our high quality Attic Cover is very effective at controlling excess heat during the summer and winter.
- 【Easy to install】Zipper access and simple installation. To install, simply place the attic door insulation cover in your attic door opening and staple it to the door frame.
Product features
Excellent quality
Our attic door heat shield works all year round, hot in summer and cold in winter.
Heavy duty Zipper access
Compared with other products, our Attic stair insulation cover uses heavy duty and high quality zippers which allows easy access to and from the attic without struggle.
Installation needs
The nail gun must be used for installation. Clothes or masks are required.
SAVE MONEY
Having a 15.3 R-Value and a major HVAC efficiency, it will help you to recover your investment just in a few months from the purchase; If you want to cut household costs, for sure you should insulate your attic access door
Product description
Benefits of an Attic Ladder Insulation Cover:
-Works year round in hot summers and cold winters.
-Reflects 97% of Radiant heat.
-Insulates; Constructed of 2 layers of Aluminum with bubble insulation inside, this acts similar in function to a double pane window with the bubble insulation creating an air space between aluminum which creates a thermal barrier.
-Seals and Prevents unwanted drafts.
-Prevents Moisture issues from temperature differences in the attic.
-Acts as a barrier to prevent dust or pollutants from entering your home.
What is radiant heat and how does it impact the temperature of my home?
All of the heat from the sun is transferred to the earth in the form of radiant heat, radiant heat travels at the speed of light until it is either absorbed or reflected. Radiant heat is the invisible energy that is transferred without direct contact from a hot object to a cooler object. In your home, radiant heat from the sun will transfer through your roof into the attic, your attic insulation acts as a barrier to help prevent the heat from transferring into your home, but without insulation or radiant barrier over the attic entrance, the heat travels directly into your home. This heat transfer will make your heating/cooling system work harder and can cause hot/cold spots in your home. If you have ever been under a shade tree on a hot summer day, you know first hand how effective a radiant barrier can be.
Will this also help in the winter months?
Yes, the radiant insulation barrier keeps warm air inside your home using the same principles as well during winter months by acting as an insulation barrier, preventing drafts and reflecting warm air back into your home where it belongs.
- ✅[ PREMIUM ] Constructed of of Aluminum Material with insulation inside to allow for an all year round energy savings in your home! Fits doorways that are 25" x 54".
- ✅ [ EASY & FAST INSTALLATION ] Easy to follow instructions included.
- ✅[ ATTIC SEAL ] Creates a seal at the attic door to prevent dust or pollutants from entering your home. Increases HVAC efficiency.
- ✅[ EASY ACCESS ] Designed with a lower front that is accessed by a high quality zipper to allow you quick and easy access to your attic!
- ✅[ MONEY BACK GUARANTEE! ] LIFETIME WARRANTY! 100% Money back guarantee if you are not completely satisfied!
User questions & answers
Question: | Is this attic tent made in the usa |
Answer: | Don't know. Not standard. |
Question: | What is the R-value |
Answer: | Yes easily |
Question: | Can I install this in a smaller opening? My pull-down is only 22" wide and is less than 54" long |
Answer: | Probably better than you have now with nothing over the attic stairs. Eliminates cold air drafts. Warm air trapped in the space also provides insulating factor |
Question: | My attic ladder has three folds and is 15" total height folded. The depth of the ladder opening is 6". Will this product fit |
Answer: | You could simply staple it to the lower portion of your attic stair frame rather tha the upper edge. Depending on the size of your framed opening this should give you 2 to 3” of adjustment room. Another approach would he to fold the bottom edge evenly around the perimeter by the amount you need to shorten the height, secure the folded part it with duct tape, And then staple it to the frame. |
- R-Value 15.67+++Reduce up to 94% of heat at your attic door+++BEST QUALITY, MORE SAVINGS+++
- Blocks up to 98% of radiant heat.
- Easy to Instal / No fumes or fibers to inhale. Ultra light weight.
- Retains air longer than other brands.
- Made in USA
Product description
Attic Stairs Insulation Cover 138x64x28 cm for Pull Down Stair, Zipper Design Fireproof Attic Door Insulation Stairway Cover Stair Ladder Opening Attic Tent for Isolate the Outdoor Cold & Warm Air,Attic Door Insulation Stairway Cover Stair Ladder Opening Attic Tent with Zipper for Easy to Access
Features:
- Home Garden Fireproof Attic Stairs Insulation Cover, Attic Stairs Insulation Cover for Pull Down Stair, Attic Tent 25x54x11 inch, Extra Thick Fireproof Attic Stairway Insulator, Easy Installation
- Material: Fireproof attic stairway Insulation cover was made of bubble aluminum foil, double-layer protection.
- Function: Better isolation effect, durable, and long lasting. Fireproof, waterproof and dustproof.
- Thickened: Super thick Insulation cover, isolate the outdoor cold and warm air, double bubble reflective radiant barrier.
- With Zipper : With zipper allows for easy entrance and exit to the attic when climbing up and down your pull down attic stairs.
- Foldable: This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden-in the attic.
- Easy Installation: Zipper access and simple installation. To install, simply place the attic door insulation cover in your attic door opening and staple it to the door frame.
- Energy Saving Fireproof Attic Stairs Door Ladder Insulator Easy Installation Pull Down Tent with Zipper
Specifications:
Item Name: Attic Stairs Insulation Cover, Fireproof Attic Door Insulation Cover, Attic Stairway Insulation Cover, Attic Ladder Insulation Cover Attic Tent
Material: bubble aluminum foil
Color: Silver
Size(L x W x H):about 138x64x28cm/25x54x11inch
Package includes:
1 or 2 pcs x Attic Stairway Insulation Cover
- 【Attic Stairway Insulation Cover for Pull Down Stairs 】- Fits openings up to 138x64x28 cm/25x54x11 inch. This insulator covers the full entrance to the attic door while allowing space for the stairs to fold and fit securely beneath, leaving the insulation hidden-in the attic.
- 【Attic Stairs Insulation Cover, Fireproof Attic Stairs Door Ladder Insulation Cover】- 1. Our Fireproof Attic Stairway Insulation Cover is made of high-quality bubble aluminum foil material with insulation inside to provide you with all-year-round energy savings insulating performance. 2.Thicked Insulation cover, isolate the outdoor cold and warm air, double bubble reflective radiant barrier. Double-layer protection. Better isolation effect, durable and long lasting.
- 【Attic Stairs Door Ladder Insulator Pull Down Tent with Zipper】- This Attic Cover with zipper allows for easy entrance and exit to the attic when climbing up and down your pull down attic stairs. When you are trying to enter the attic, just open the zippers and fold the cover over.
- 【Easy Installation Attic Ladder Insulation Cover】- You can install it in minutes. Zipper access and simple installation fits for folding attic stairs/ knee wall doors/ attic scuttle holes etc . (Warm Notice: Measure the opening to determine the required size of a cover kit. Carefully measure the inside and outside dimensions as well as the height requirements of your attic stairs before purchased.)
- 【Package Includes】- 1 or 2 pcs x Attic Stairway Insulation Cover;This Attic stairs insulation cover is designed for optimal energy efficiency. Our insulation cover works year around, on hot summers and cold winters, helps to keep your valuable heated and cooled air in your living space where you want it. Also can helps to keep your house clean. Bubble Aluminum Foil Fireproof Attic Stairs Insulation Cover, isolate the outdoor cold and warm air, saving money on the bill.
Product description
Insulates & Air Seals Attic Staircase
Reflects 95% of Radiant Heat
High R-value
Lower Front Opening for Easy Access
Easy Zipper Access To Attic
Installs in Minutes
- Extra Thick Attic Cover: Designed for optimal energy efficiency. Prevents air, dust or pollutants leakage into your home during the entire year, no matter hot summers and cold winters.
- Class A Fire Resistance Material: R-Value of 15.3, reflects 97% of radiant heat.
- Dimensions: Fits openings up to 25" x 54" x 11". Weights only 1,80 pounds
- Easy/quick Installation and Easy zipper access: Installs in minutes. Installation Sheet inside the package. Durable and high quality zippers allows easy access to and from the attic without struggle.
User questions & answers
Question: | Where i can find different measurements like 51x |
Answer: | No. If u just need a ladder find a local woodworker and have him build u one |
Question: | Could this fit a 25.5 in x 54 in. opening |
Answer: | The 22 x 47 and the 22 x 54 sizes will fit into a 22 inch wide rough opening. |
Question: | Is r 15.3 enough insulation for an attic in the northeast (ct |
Answer: | The ladder comes with everything you see in the picture. So yes the ladder is included as well as a red handrail. The plastic ladder ends can be purchased separately. |
Question: | Can this product;s height be shortened in any way? Not the linear size, but the height when installed. It sticks up too high. I do not want to cut it |
Answer: | I have a 9 foot high ceiling and I had to cut off about two feet of the bottom of the ladder, so all you will have to do is trim down the required length to fit your 7 foot ceiling. should be a snap. Good luck. |
- ✔【Wide Attic Seal Protector】Attic Door Insulation Cover works during the entire year, hot summers and cold winters; Creates a seal at the attic door to prevent dust or pollutants from entering your home.
- ✔【Fireproof Material】Class A fire resistance. Constructed of 2 layers of Aluminum and the air bubble in the second layer helps in blocking the heat transmission, reflects 97% of radiant heat, provides a 15.3 R-Value and outstanding HVAC efficiency. Premium material protect your house from affecting by moisture or humidity. Make your life more comfortable and health.
- ✔【 Insulation Design】This Attic Stairs Insulation Cover is designed by our experts, made with premium foil bubble insulation inside to provide you with all-year-round energy savings insulating performance. Fits openings up to 25" x 54" x 11".
- ✔【 Insulation Easy Zipper】: Attic stair insulation cover adopt heavy duty, high quality zippers and shallow entrance which allows easy access to and from the attic without struggle.
- ✔【Easy Installation】Zipper access and simple installation. To install, simply place the attic door insulation cover in your attic door opening and staple it to the door frame.
Product features
ATTIC COVER with EXTRA THICKNESS
This attic stairs insulation cover is the highest quality wall thickness in the market will protect your house from air leaks during the summer and winter months, make it hot in summer and cold in winter.double sided aluminum foil with foam insulation inside for every effective control of excess heat and reduce your bills drastically.
Excellent Lightweight Material
- Reflects 97% of Radiant heat.
- Insulator is constructed of 2 layers of Aluminum with bubble insulation inside, this acts similar in function to a double pane window with the bubble insulation creating an air space between aluminum which creates a thermal barrier.
Double Heavy Duty Zipper Access
- Compared with other products, our Attic stair insulation cover uses heavy duty and high quality zippers which allows easy access to and from the attic without struggle.
Super Sealing Ability
- The insulation cover can create a seal to prevent dust or pollutants leakage into your home during the entire year.
- The attic door insulating cover will keep your home cool and dry in the summer and warm and dry in the winter.
STEP 1
Open the attic access and fit the attic cover into place . Ensure the sloped zipper part is in the direction of entry to enable easier access when unzipped.
STEP 2
Once fitted properly in place , staple the insulation cover to the wood frame of the attic entry every 4-6 inches all the way around leaving little to no air leaks.
STEP 3
Your attic access is now properly insulated restricting air flow in and out of the attic . Leave zipper completely closed when not in use to ensure no air leaks.
LIGHTWEIGHT
Lightweight Easy to handle and install Sewn seams for added strength and longevity.
Latest Reviews
View all
Pool Floaties
- Updated: 08.02.2023
- Read reviews

Hp Cookware Sets
- Updated: 13.01.2023
- Read reviews

Car Scan Tools
- Updated: 15.05.2023
- Read reviews

Training Collar With Shocks
- Updated: 06.02.2023
- Read reviews

Shallow Well Pump With Pressure Tank
- Updated: 17.04.2023
- Read reviews