10 best attic fan costs
The cost of an attic fan can vary depending on several factors, including the type of fan, its features, brand, and installation requirements. Here's an overview of attic fan costs:
Types of Attic Fans:
Roof-Mounted Attic Fans: These fans are installed on the roof, and their costs typically include the fan unit itself, installation, and any necessary roofing work. Prices for roof-mounted attic fans can range from $200 to $600 or more, depending on the size and quality of the fan.
Gable-Mounted Attic Fans: Gable-mounted fans are installed on the gable end of the attic. They are often more affordable than roof-mounted fans and can cost between $100 and $400, depending on the size and features.
Solar Attic Fans: Solar-powered attic fans are energy-efficient and can cost between $200 and $600. While they may have a higher upfront cost, they can save on energy bills in the long run.
Size and Capacity: The size of the attic fan is a significant factor in its cost. Larger fans designed for bigger attics will generally cost more than smaller ones. The capacity of the fan is measured in cubic feet per minute (CFM), and fans with higher CFM ratings may come at a premium price.
Features:
Thermostat and Humidistat: Attic fans with built-in thermostats and humidistats that automatically control the fan's operation may be more expensive than basic models.
Variable Speed Control: Fans with variable speed settings may also cost more but offer greater control over attic ventilation.
Quiet Operation: Quieter attic fans with noise-reduction features may have a higher price tag.
Installation Costs: The cost of installation can vary depending on your location and the complexity of the installation process.Professional installation is recommended for most attic fans, and installation costs can range from $200 to $500 or more.
Additional Costs:
- You may need to purchase additional accessories such as vents or louvers to ensure proper airflow.
- If your attic requires electrical wiring or modifications, there will be additional costs associated with the electrical work.
Brand and Quality: Well-known brands and high-quality attic fans may come with a higher price but often offer better durability and performance.
Warranty: Some attic fans come with longer warranties, which can provide peace of mind but may slightly increase the initial cost.
It's important to consider the long-term benefits of attic ventilation when evaluating costs. A properly installed and well-functioning attic fan can help reduce cooling costs in the summer and extend the lifespan of your roof by preventing excess heat and moisture buildup. Be sure to research different models, get multiple quotes for installation, and consider the specific needs of your attic space when budgeting for an attic fan.
Below you can find our editor's choice of the best attic fan costs on the market
iLiving - 16" Wall Mounted Exhaust Fan - Automatic Shutter - Variable Speed - Vent Fan For Home Attic, Shed, or Garage Ventilation, 1200 CFM, 1800 SQF Coverage Area
Iliving
Product description
iLiving - Wall Mount Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you have found just what you're looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. •Heavy-Duty, Galvanized Steel Frame •Weather Resistant Aluminum Shutters and Blades •Motion-Balanced for Quiet Operation •Thermally Protected and Permanently Lubricated Motor •Automatic Shutters •For Home Cooling and Ventilation •Corrosion-Resistant Wire Guards •Variable Speed Setting Functionality On Select Sizes (controller sold separately) •UL Listed •Available in (8 or 9) Size Variations Perfect Cooling and Ventilation Solution For •Homes •Attics •Garages •Sheds •Reducing Cooling Costs •And More The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.
- CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help to keep your living space cooler and more comfortable year-round.
- MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more. Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
- VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
- WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heatlonger than other competitors’ products adding to the fan’s longevity.
- POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 16-inch runs on standard 120 volts at 1/20 HP, 0.83 amps with 1580 rotations per minute, cooling and ventilating an area of 1200 cubic feet per minute!
Cool Attic CX30BD2SPD Belt Drive 2-Speed Whole House Attic Fan with Shutter, 30 Inch
Cool Attic
Product description
The Cool Attic 30 in. belt drive 2-speed whole house fan is designed for 2,000 to 3,000 sq. ft. homes. It offers an efficient way to reduce cooling costs, while keeping your whole house more comfortable and full of clean, fresh air. It works by pulling fresh air in from the outside and expelling the warm air up into the attic and pushing it out through your attic exhaust vents. This unit requires a minimum of 10-12 sq. ft. of net free exhaust vent area to perform quietly and efficiently. Dual, self-aligning ball bearing mechanisms, and a precision-balanced 4-blade aluminum fan assembly contributes to quiet, reliable performance and longevity.
From the Manufacturer
This Cool Attic 30-inch belt drive 2-speed whole house fan with shutters will help cool down your home in those hot months. It has a precision-balanced aluminum fan blade assembly with 4 blades, unlike 3 in most competing brands for greater air movement. It has a joist-in/joist out installation and steel venturi for enhanced durability. The shutter is a white powder-coated finish automatic shutter with 95% plus air closure. A wall switch is included with high/low/off settings. It is UL and C-UL listed and comes with a 10 year warranty. This model is designed for 2,000 to 3,000 square feet on one story and has a CFM high/low of 7,800/5,400. This unit needs 10 to 12 square feet of net free exhaust area. Rough Opening: 29-1/2-Inch x 32-1/4-Inch, Outside Shutter Dimensions: 31-1/2-Inch x 34-Inch.
- WHOLE HOUSE FAN: The cool attic 30 in. belt drive 2-speed whole house fan is designed for houses with 2,000 to 3,000 sq. ft. attics. It offers an efficient way to reduce cooling costs, while keeping your whole house more comfortable. It features a powder coated finish for weather resistance
- ATTIC FAN: It works by pulling fresh air in from the outside and expelling the warm air up into the attic and pushing it out through your attic exhaust vents. Save on energy costs, remove stale, unhealthy air, and improve your home's atmosphere. What's not to love?
- MADE IN AMERICA: No cut corners, no cheap parts, no worry installation. Made in the heartland of Texas, we've been assembling fans since 1948 with legendary customer service. Don't save a dollar and gain a headache, go with quality you can trust.
- QUIET ENGINEERING: Re-engineered bracing system creates a more stable motor mount, is stronger than tube-style bracing, and virtually eliminates vibration. No more helicopter in your hallway, these units are quieter with less vibration than the units of yesteryear. Easy to install with an immediate return on investment.
- POWERFUL WHOLE HOUSE FAN : The most important part of the whole fan system is the motor, and we don't dissapoint. Our powerful motors will cycle the air in your home in no time, leaving you refreshed and cool.
User questions & answers
| Question: | I have a two story, 3700 sf home with a solar attic fan. How much of cooling difference will adding the whole house fan make to cooling my house |
| Answer: | The solar attic fan will probably make the whole house fan work more efficiently as the attic should be cooler. You can definitely benefit from the whole house fan though as it will cool your house and the attic rather than the attic only. I would only add that the 36-inch fan would probably be more adequate for your size house, but that depends also on the footage vs fan allocation. My house is 3400 sq ft and the fan works great for us. |
| Question: | I live in the North East, how well do the shutters prevent cold air from sinking from the attic into the house during the winter months |
| Answer: | It is pretty good at stopping the air flow but you will still loose a lot of heat. The metal shutters have no insulation value so you basically have a 3 foot square hole in your ceiling. This hole also lets in a lot of heat in the summer when the fan is not in use. There is a fix for this. There are several videos on You Tube that show you how to construct a cover, inside your attic, out of 2 inch insulating foam. It has doors that will still open and close when the fan is on. I have not built mine yet but plan to as soon as it cools off some. |
| Question: | How wide are the vent veins that actually move? Will they fit between 24" on center truss giving you 22 1/2" opening |
| Answer: | The cut out is 26" if i remember.. I tried to install it your method but couldnt and had to use the joint in middle method with extra wood for frame.. This fan has paid for itself already. Works great |
| Question: | I have a 950 sq ft home. It says not to install in smaller that 1200 sq ft.... If I left it on low would it be ok |
| Answer: | Approx 800 square foot here... We open the windows and leave the fan on low; it performs admirably. Make sure your attic venting is adequate; that makes the biggest difference. |
Product features
Cool Attic Belt Drive 2-Speed Whole House Fan with Shutter, 30-Inch, White
The cool attic 30 in. belt drive 2-speed whole house fan is designed for houses with 2,000 to 3,000 sq. ft. attics. It offers an efficient way to reduce cooling costs, while keeping your whole house more comfortable. It works by pulling fresh air in from the outside and expelling the warm air up into the attic and pushing it out through your attic exhaust vents. This unit requires a minimum of 10-12 sq. ft. of net free exhaust vent area to perform quietly and efficiently. Dual, self-aligning ball bearing mechanisms, and precision-balanced 4-blade aluminum fan assembly, contribute to quiet, reliable performance and longevity.
Ventamatic, Ltd.
Ventamatic, Ltd. has provided the ventilation industry with an air for excellence for over 70 years. One of the pioneers in the ventilation industry since 1948, Ventamatic, Ltd. manufactures high quality air delivery and air movement products for the residential, commercial, industrial, and agricultural markets. Based in Mineral Wells, Texas, the company is an industry leader with a reputation for quality, value, and customer satisfaction.
Black Richard's Heart (The MacCulloughs Book 1)
Amtrak Solar Powerful 50-Watt Galvanized Steel New Upgraded 14" Fan Housing, Solar Attic Fan Quietly Cools, Ventilates Exhaust your house, garage or RV and protects against moisture build-up
Amtrak Solar
- ( High efficancy fan blade ) New 14” Fan Housing with 10” High Efficiency fan blade. Enough to open louver. Easy to install with quick-connect wires. Reversible push and pull fan.
- ( Numerous Applications ) For gable vent, greenhouse, garage, shed, cabin or RV. Includes 15’ of extra wire and brackets.
- ( High Torque Motor ) Features sealed ball bearing and Thermal protected fan motor with fully balanced high efficiency fan blades for low noise level and long life. Covers areas up to 2250 Sq. Ft.
- ( Free Thermostat upon request ) This thermostat is made in USA by Selco one of the best companies in the world for making thermostat.. We also offer instructions and connectors with the thermostat so it can be easily installed.
- ( Industry’s best warranty ) Amtrak Solar products such as fan motor, solar panel, fan blades are high quality so we offer 25 year warranty for its products which is the best warranty in the business.
User questions & answers
| Question: | How do i get the free thermostat |
| Answer: | What? There’s a free thermostat? |
| Question: | do you have to fill the gap when installing fan in gable vent? video showed using cardboard to fill gap at top |
| Answer: | Yes, I had to build a frame to hold mine exactly in the center where I wanted it. I cut plywood to nail and fill gaps to prevent pollen and debris from flying in through the sides since it only runs on full sun. One cloud and it turns off!😕 I will eventually switch it to the other side of attic to just circulate the air. Will replace it with a fan that runs 24/7 to prevent pollen and dust coming into attic. |
| Question: | can it be used in a greenhouse |
| Answer: | I'm using it in a solar wood kiln, I'm assuming that the conditions are similar enough to say yes. Had a sunny but frigid day with a high of 5 degrees, the fan worked fine. The temperature inside the kiln in summer reached above 110 degrees, it still worked well. Humidity and temperature don't seem to affect the performance of the fan whatsoever. |
| Question: | Our cottage's roof faces east in the am and west in the pm. so my question is can we install a panel on each side of the peak |
| Answer: | Yes you can |
Product features
Amtrak Solar's Powerful 50-Watt Galvanized Steel Solar Attic Fan Quietly Cools your House Ventilates your house, garage or RV and protects against moisture
Amtrak Solar Attic Ventilator comes with 50 Watt High-Quality Crystalline Solar Panel and High Volume Fan. It could be Installed in the gable vent or anywhere in the attic. This is a 12 volt DC fan configured to work with the solar panel with High Efficiency Fan Blade.
Z Brackets to Install the Solar Panel
We include 4 Z Brackets to install solar panel in every kit along with the nuts and bolts and the solar panel are predrilled so it makes easy to install the solar panel.
50 Watt Solar Panel
For any solar fan to perform well it would need power from the solar panel. Amtrak Solar 50 watt solar panel with pre drilled holes along with the Z brackets for easy installation.
New Upgrade 14 inch Fan Housing and Larger fan blade!
We recently upgraded our fan to 14 inch housing and much larger fan blade! We also install High Efficiency Fan Blade manufactured by Revor a leading fan blade manufacture in United States.
Fan installed behind the Gable Vent Removes Heat from the Attic
If you ever go in the attic in the summer time you will realize that the temperature in the attic could exceed 160 degrees. Heat that is trapped in the attic directly effects your air conditioning and your electric bills. Solution is simple. Solar attic fan! It provides free solar energy to keep your house cool and attic ventilated. Also save money on electric bill by reducing the need to run air conditioning!
Keto Diet Pizza And Pasta Cookbook: Delicious, Spicy and Super Easy Recipes for Keto and Italian Food Lovers on Budget
AC Infinity CLOUDRAY T10, Whole House EC Fan 1200 CFM with Temperature Humidity Controller – Ceiling Mount House Attic Vent Fan Exhaust Energy Efficient Home Ventilation System
- A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces.
- Smart digital controller with temperature and humidity trigger programming, fan speed control, timers, and alarms.
- Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others.
- Features 2-door shutters with damper that blocks attic air from entering living spaces when fan is not in use.
- Duct Size: 10” | Dimensions: 9.8 x 15.2 x 11.3 in. | Airflow: 1201 CFM | Noise: 48 dBA | Bearings: Dual Ball
User questions & answers
| Question: | Can it be used as a range hood |
| Answer: | No. Buy a range hood |
| Question: | Does it suck heat inside room |
| Answer: | Hello, Thank you for taking the time to reach out to us with your product question/feedback. Please reach out to our Customer Service Department via Amazon messaging or email. One of our agents will be more than happy to assist you. We look forward to hearing from you soon. Kind regards, AC Infinity "Your Cooling Solutions Provider!" |
| Question: | Can you operate the system by remote control without the smart thermostat attached |
| Answer: | without the controller hooked up it simply goes to full speed when plugged in. with the controller plugged in it can operate at any of the speeds 1-10. I operate mine with an Alexa controlled smart outlet. It returns to the same speed every time. Set it at speed 6, and then have the Alexa plug (or a plain wall switch) turn the power on an off. But you have to keep the controller plugged in or it will go to 10. |
Product features
The Air Conditioning Alternative
The new CLOUDRAY series is the energy-efficient solution to cooling your home. Using a cutting-edge electronically commutated (EC) motor, the whole house fan runs quiet and reaches low speeds without generating noise or heat. This fan uses up to 95% less power than air conditioning units, saving you money on energy bills and paying for itself in the long run.
Smart Programming
All models include a programmable controller with precise temperature and humidity sensors located on the 12-foot corded probe.
Quiet PWM Motor
Each system utilizes an EC motor that is controlled using Pulse Width Modulation (PWM), which is quieter and more energy efficient than AC fans.
Mixed-Flow Design
Featuring a mixed flow design, the fans maintain peak performance in high static pressure environments. Ingress-protected against dust and liquids.
Plug and Play
The complete kit includes the whole house fan unit, controller, user manual, and everything needed to mount the fan and power it through an outlet.
Battic Door Whole House Attic Ceiling Fan Shutter Seal Cover, Fits up to 36" X 48" Attic Fan Shutters
KCHEX
Product description
MADE IN U.S.A. The Battic Door Whole House Attic Fan Ceiling Shutter Seal is an energy-saving insulating cover for Whole House Attic Fans. It reduces air-leakage through the whole house attic fan saving the homeowner heating and cooling loss and energy costs. The Battic Door Whole House Attic Fan Shutter Seal is installed over the ceiling shutter from the house side in the fall and removed in the spring. Attic access is not required! Simple to install - just velcro the cover into place. By reducing the amount of heat and moisture leaking into your attic, the severity of ice dams and attic mold is greatly reduced! Fits max 36" x 48" whole house attic fan ceiling shutters. Kit includes durable, attractive, non-toxic, white-colored, space-age foam, only ¼” thick, yet has an R-value of R-8. The foam air seals and insulates the attic fan, stopping heating and cooling loss and air leaks. The insulation is a Class A/Class 1 fire rated foam with superior thermal performance. No fiberglass – no itching. Larger kits for 48x48" are larger also available. We use white Velcro to seal the kit. We do not use magnets. Magnets are more expensive, can be weaker, and most shutters are aluminum.
- Ceiling Shutter Seal Cover provides an air seal reducing any air leakage.
- Works like a storm window for your whole house fan!
- Reduce drafts, improve comfort, and save energy costs all year-'round!
- Attic access is not required! Installs easily - TRIM IT TO FIT.
- Cover and seal the attic fan from the house side in minutes, no tools are needed!
User questions & answers
| Question: | How does this sticky tape provided work? Thought it came w/velco |
| Answer: | It's been a minute, 4x4? Remove center drive shaft, motor and motor mount, which allows you to remove the clutch piece/assembly and can pull the motor mount out, new bearing goes in mount and the adapter goes on the front side of the clutch and reasseble |
| Question: | Velcro tape not in package, nor white trim tape - double sided tape only in package. How does one contact seller to correct |
| Answer: | No sure. Ultimate my have a center diff. If it does you wouldn't need this at all. The center diff replaces the center slip clutch. |
| Question: | is there a smaller size |
| Answer: | Im not sure. These were for my losi clutch bell. What are you looking for clutch or what bearing? |
| Question: | Does it have to be velcroed? Do you sell one that is magnetic |
| Answer: | Its pretty clean. The chain has a light oil coating for protection during shipping/storage I assume, but it is easily wiped clean with a rag. It does not have any more than what you would normally want on a chain hoise to keep it from rusting and running smooth. |
iLiving - 18" Wall Mounted Exhaust Fan - Automatic Shutter - Variable Speed - Vent Fan For Home Attic, Shed, or Garage Ventilation, 1736 CFM, 2600 SQF Coverage Area
Iliving
Product description
iLiving - Wall-Mounted Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. •Heavy-Duty, Galvanized Steel Frame •Weather Resistant Aluminum Shutters and Blades •Motion-Balanced for Quiet Operation •Thermally Protected and Permanently Lubricated Motor •Automatic Shutters •For Home Cooling and Ventilation •Corrosion-Resistant Wire Guards •Variable Speed Setting Functionality On Select Sizes (controller sold separately) •UL Listed •Available in (8 or 9) Size Variations Perfect Cooling and Ventilation Solution For •Homes •Attics •Garages •Sheds •Reducing Cooling Costs •And More The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.
- "CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help keep your living space cooler and more comfortable year-round."
- MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more.Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
- VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
- WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity.
- POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 18-inch runs on standard 120 volts at 1/15 HP, 0.90 amps with 1070 rotations per minute, cooling and ventilating an area of 1736 cubic feet per minute!
The Thing in the Attic
GRELWT 24" Wall Mounted Exhaust Fan - Ventilation Fans - Automatic Shutter - Vent Fan For Home Attic, Shed, or Garage Ventilation, 5600 CFM, 6200 SQF Coverage Area
Product description
GRELWT - Wall Mounted Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the GRELWT Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install. By removing excess heat and moisture our exhaust fan keeps your living space cooler and more comfortable year-round while reducing expensive cooling bills. Heavy-Duty, Galvanized Steel Frame Weather Resistant Aluminum Shutters and Blades Motion-Balanced for Quiet Operation Thermally Protected and Permanently Lubricated Motor Automatic Shutters For Home Cooling and Ventilation
- 🍀CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our greenhouse exhaust fan is designed to help remove excess heat and moisture keeps your living space cooler and more comfortable year-round.
- 🍀MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the greenhouse , attic, garage, and more. the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
- 🍀WEATHER RESISTANT SHUTTERS: these shutters are made of durable galvanized steel, which prevents the formation of rust，thereby adding the life of the fan.
- 🍀POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of GRELWT’s Shutter Exhaust Fan. The 24-inch runs on standard 120 volts at 1/3 HP, 2.65 amps with 1400 rotations per minute, cooling and ventilating an area of 5600 cubic feet per minute!
- 🍀EXHAUST FAN WARRANTY: The housing is made of galvanized steel which prevents rust. This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with electrical plugs. Requires wiring to your building's electrical system.
Latest Reviews
View all
Disney Playards
- Updated: 15.06.2023
- Read reviews
Hose Connectors
- Updated: 02.06.2023
- Read reviews
Different Types Of Keurig Machines
- Updated: 16.01.2023
- Read reviews
Music Maker For Kids
- Updated: 24.02.2023
- Read reviews
Craftsy Quilts
- Updated: 05.07.2023
- Read reviews