7 best oil furnaces

Product description

' Oil Burner Pump, Number of Stages 1, GPH 3, Adjustable PSI Range 100 to 150, RPM 3450, Lift Up to 8 ft. in 1-Pipe System, Up To 14 ft. in 2-Pipe System '

• SUNTEC A2VA7116 SINGLE STAGE 3450 RPM "A" PUMP RATED FOR 3 GPH @ 100 PSI (FACTORY SET @ 100PSI ADJUSTABLE FROM 100-150PSI)
• ROTATION AND NOZZLE LOCATION AS VIEWED FROM THE SHAFT END RH-RH INCLUDES BYPASS PLUG (NOT INSTALLED)

User questions & answers

Question:	I currently own the p4-70R model. Does this one replace that model? I can't seem to find my model anywhere
Answer:	For older units you would want an 8 meet rating. By using a higher mere it restricts flow and can cause your coils to freeze and ice over.
Question:	Will this replace my A1RA-7738? I have a Lanair MX300. The 7738 was a replacement I was told would work and did. Not sure what original was
Answer:	We recommend you change 1" filters every 30 to 90 days depending on your environment.
Question:	What shuts off the oil spray when furnace reaches temperature
Answer:	The depth of an air filter does not determine the MERV rating. It is the filter media (or material) that is rated MERV 14. Thank you for your inquiry. We appreciate your business!
Question:	I have an 2bva2116 fuel pump do you have a replacement or an seal kit I screwed up and left the return valve closed and blew the seal out
Answer:	That will depend on what you mean by ideal. The merv scale goes from 1-16. 8 being in the middle will filter more than a 1 but not as much as a 16. This rating is based on how small a particle it will filter. The 8 is rated for filtering particles as small as 3 microns and is a good choice for most homes. The merv 1 will filter to 10 microns and is just a cheap filter. The merv 16 is good to .3 microns and is hospital grade. Keep in mind that the higher the merv rating the faster it will plug up and the faster you will need to replace it. Also with a higher rating you will experience a reduced air flow. A reduced air flow may cause your fan to heat up and possibly burn up.

Product description

This ignitor is can be used on all Lanair burner models CA / FI / HI / MI / MX Burners

• Lanair waste oil furnace Ignitor 14,000 Volt / ignition transformer 9600 / 8856

Product description

GENERAL 1A-30 FUEL OIL HEAT FILTERS REPLACEMENT CARTRIDGE 6817068



REPLACEMENT REFILL FOR THE FOLLOWING MODELS



GENERAL 1A-25A

GENERAL 1A25

GENERAL 88CR

UNIFILTER 77

WESTWOOD S264

AUTOFLOW F300

WESTWOOD F10

WESTWOOD F12

WESTWOOD F15

WESTWOOD F20

WESTWOOD F25

SID HARVEY 264

SID HARVEY 264F



10-micron wool felt. Center core bonded to prevent media migration. COMES WITH GASKETS!!

• General 1A-30 Fuel Oil Furnace Filters Replacement Cartridge
• These are 10-micron Wool Felt Filters; Screen Center core bonded to prevent media migration; 3 Gaskets included.
• Compatible with bio-fuel blends up through B100
• Replacement for the following numbers:
• GENERAL 1A-25A ,GENERAL 1A25, GENERAL 88CR, UNIFILTER 77, WESTWOOD S264, AUTOFLOW F300,WESTWOOD F10, WESTWOOD F12, WESTWOOD F15, WESTWOOD F20, WESTWOOD F25, SID HARVEY 264, SID HARVEY 264F

Product description

Hollow Oil Furnace Nozzle, .85 80°.

• .85GPH-80 HOL SPRY NZZL 80DEG
• .85GPH-80 HOL SPRY NZZL 80DEG

User questions & answers

Question:	Is this 80°a nozzle
Answer:	Yes just hook everything up and your good to go.
Question:	What is the difference between nozzle A and nozzle B
Answer:	Absolutely. I just installed mine a couple weeks ago. It's in the attic above my bedroom. I am very pleased with the noise level. Great furnace...
Question:	we require 5 x 60 deg 0.5 in stainless steel hollowcone burner nozzle
Answer:	I believe I did. Not certain. Its a great unit. Really happy with it. Functions beautifully and very efficient. My monthly gas bills are extraordinary low. My house is large and multiple stories yet warm throughout. I would highly recommend this unit
Question:	How often I should change this
Answer:	Dear Valued Customer,Goodman furnaces are covered by a 5 year parts warranty as long as it's installed by a licensed HVAC or EPA certified installer. You will have to provide that certification to us in order to process the warranty.For further assistance placing your order please call our sales team during normal business hours (Monday - Friday , 9 am - 6 pm EST) at 888-474-9966.If you prefer for us to call you, please provide your telephone number and we will have a representative of The AC Outlet contact you to discuss the details of your inquiry.Sincerely,The AC Outlet Sales Team

Product description

This is a genuine replacement part. The model number and name for the following item is: Supco CE441 Zoom Spout Oiler.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Supco CE441 Zoom Spout Oiler

• Manufacturer model # CE441
• Genuine Replacement Part
• Supco Item
• Manufacturer model # CE441
• Genuine Replacement Part
• Whirlpool item

User questions & answers

Question:	Is this oil good for lubricating electric shavers
Answer:	The P4-70R is a "B" pump meaning two stage, the replacement is a Suntec model B2YA8916. If you do not have a two pipe system go with the A2VA-7116.
Question:	Can I oil my rollerblade bearings with this
Answer:	No. The A1RA-7738 is a 1725 RPM pump, thats meant for waste oil furnaces, like your Lanair. This A2VA-7116 is a 3450 RPM pump (double speed), meant for pumping #2 or higher fuel oil. You need to find a pump with a compatible speed,and fuel type to what you have.
Question:	Is this safe to use on plastic
Answer:	There is a probe in the furnace that senses when the burner has reached the shut off temperature. This causes a relay to de-energise cutting power to the burner motor, oil pump and igniter stopping the oil flow and burner ignition.
Question:	Is this filled with the mo98 oil
Answer:	I don't have any parts! I just bought a new pump and installed it as is and it has been working great for a year now.

Product features

From the book

This potion is great for calming the nerves and sending away the hurt of a broken heart. It's especially effective at bedtime for calming the mind and heart from stress and worry, and aiding a peaceful night's sleep.

What to do

Put the basil, rose petals, and essential oils into the jar of oil. Add the rose quartz and put the lid on the jar, or put the lid on and place the quartz on top.

Take three deep breaths, then open th ejar and rub some of the oil onto your wrist or over your heart.

Supco CE441 Zoom Spout Oiler

Product Description

Zoom Spout Oiler is a paraffin base, non-gumming, high quality lubricating oil. Sold in a counter display case, each bottle has a flexible telescoping pull out spout to help access hard to reach areas.

Features/Benefits

• Flexible spout extends and retracts to any in-between length
• All purpose lubricating oil
• Withstands high temperatures without breaking down
• Viscosity: 92-99 @ 140°F

About Us

Headquartered in Allenwood NJ, we operate proprietary manufacturing facilities in New Jersey, the Midwest and abroad. SUPCO maintains a worldwide network of sales representatives and distributors to serve both domestic and international industries for last 75 years.

Within the last decade, we have experienced strategic growth through acquisitions of Climate Technology Corporation (CTC) , A-1 Components , Cam-Stat, Jason Industrial aftermarket Appliance and NAPCO. SUPCO’s commitment to innovation, manufacturing quality and technician-focused solutions at value-driven prices makes us prominent in the HVAC, refrigeration and aftermarket Appliance part industries.

Product description

From the inventors of the oil filled category comes a revolutionary new design that effectively and efficiently heats room air with convection and also has 25% more radiant surface to quickly heat people in the room. The new heater design features thermal chimneys to provide maximum heating while ensuring a low surface temperature, making the radiator a nice choice for homes with pets or kids. The user-friendly control panel offers an adjustable thermostat and variable heat settings to customize your heating needs and optimize energy-efficient operation. For added energy savings it also features a 24-hour programmable timer. The anti-freeze setting allows the unit to automatically turn on when the temperature drops below 44 degrees F. Safety highlights include rust-resistant durable metal construction, a modern design, and a thermal cut-off function that automatically turns the heater off if it starts to overheat.

• DURABLE & MAINTENANCE-FREE: Patented, high-quality steel assembly and the permanently-sealed oil reservoir never needs refilling
• RADIANT HEAT: 1500 watts of heating power for quiet, full room comfort
• PERSONALIZED COMFORT: Customize to your heating needs with an adjustable thermostat and 3 heat settings
• PATENTED THERMAL SLOTS: Unique thermal slot design maximizes heat flow into the room while maintaining a low surface temperature
• PEACE OF MIND: Features a thermal shutoff to prevent overheating
• STAY COZY AND SAVE ENERGY. Carving out a comfortable room, desk, or other cozy spot for work, focus, and learning is more important than ever. Add this heater to your designated space to keep it cozy—optimizing productivity and turning an unexpected challenge into an energy-saving win

Product features

De'Longhi Dragon Digital Full Room Radiant Heater

Introducing a revolutionary new design that effectively and efficiently heats room air with convection and also has 25% more radiant surface to quickly heat people in the room. The new heater design features thermal chimneys to provide maximum heating while ensuring a low surface temperature. The control panel features an adjustable thermostat, variable heat settings, and a 24-hour programmable timer. The anti-freeze setting allows the unit to automatically turn on when the temperature drops below 44 degrees F. Safety highlights include rust-resistant durable metal construction, a modern design, and a thermal cut-off function that automatically turns the heater off if it starts to overheat.

Instant Warmth

Packs 1500 watts (5120 BTUs) of power for instant personal heating.

Note-Image used for illustrative purposes only, actual unit not shown.

Durable and Maintenance-Free

High quality, patented steel assembly - permanently sealed oil reservoir - never needs refilling.

Personalized Comfort

Customize your heating needs with digital controls, including an adjustable thermostat, timer and multiple heat settings.

Automatically Saves Energy

ECO function automatically adjusts heat and power settings for the most comfortable and economical warmth.

Prevents Frozen Pipes

Safety features including thermal cutoff and anti-freeze setting to help prevent freezing pipes.

144 sq feet of Comfort

Best for Rooms up to 144 sq feet that need constant heat in the colder seasons.

Product description

Universal Electronic Oil Primary with Programmable Parameters and LCD Display

• 16 character two line tri-lingual display provides simple programming and diagnostics on select models
• Enunciation of status and faults via LED or display
• No additional tool to purchase to take advantage of all control features
• Model number: R7284U-1004

User questions & answers

Question:	Before i buy this, can someone tell me the proper settings for replacing the r7184b? meaning, the time/delay settings. ty
Answer:	Hello. Thank you for the message. Yes, this is an 80 degree A nozzle. Please let us know if you have any additional questions. Thank you!
Question:	My old primary has both motor and igniter wired together. But there is a connectin for both on this new primary. Do I run them separately
Answer:	An A nozzle runs up to one GPH. A B nozzle runs two to four GPH. They are both hollow cone. The A nozzle seems to plug up sooner.
Question:	Will this replace a White-Rogers type651-301e
Answer:	The outside of course is brass, however all Delevan nozzles are brass with a stainless steel insert in the middle. Your application you listed above should be correctly stated as .50GPHX60°A, as "A" is Delevan‘s hollow patterned nozzle, and yes it is a stainless steel insert in a brass body. Long story short this nozzle will work for you if your furnace requires a 1/2 gallon an hour burn rate, and a 60° Hollow coned spray pattern.
Question:	Will this unit replace an old R8184G
Answer:	For the most extreme level of fan usage, change your filters every one, two and three months. For moderate usage, try switching the filter every two, four and six months.