9 best marley panel heaters

Product description

The 800 Watt Westar Infrared panel heaters are economical to use and an environmentally responsible alternative to 1500 Watt heaters. Using the same principle as the sun, WEXSTAR infrared heaters generate Infrared rays which are gently distributed uniformly across the room, and are absorbed by objects and walls that release the heat back evenly creating an overall feeling of warmth. This maintenance-free heater are built to last and can save up to 45% on heating costs. Great for bedrooms, offices, kitchens, basements, etc. The heater is ideal for rooms up to 250 sq. ft. Can be used for residential, commercial or industrial applications! C TUV US Certified

• Conventional heaters heat the surrounding air, hot air stays at the ceiling and the heat is distributed unevenly.  Westar infrared technology works more efficiently and evenly by heating objects rather than the air, and using a fraction of the electricity
• No fan means 100% quiet and no stirred-up dust, ideal for people suffering from asthma or allergies.
• Can be mounted on the wall, or on the floor with Westar Stand Support separate accessory.
• Easily plug to a standard electrical 120 V outlet and does not require any professional installation.
• Westar heaters are free of maintenance and no further costs or parts to be replaced. Less than an inch thick, do not take much space and are easy to relocate.

User questions & answers

Question:	Can this . unit be hardwired
Answer:	No, at least not easily. The power cords are affixed in such a way that they cannot be accessed. Some kind of filler is put in the cavity.
Question:	How hot does the surface get
Answer:	Very hot. One second of hand contact only. Ceiling mount only. Some far infrared panels can be touch and are for wall mount.
Question:	Why is this double the price of the econohome panel? it's larger and has more watts (800 vs 600) but heats about slightly less space (250 vs
Answer:	Econohome panels are convection heaters, heating up the air around them; these Wexstar panels are infrared heaters, heating up the matter in the room. I had the Econohome panel and liked it, but it wasn’t good for what I needed since I have a lot of air circulating in my space.
Question:	is this "near infrared" or "far infrared
Answer:	"Far" infrared, meaning the human eye can't see the light emitted.

Product description

For gentle heat with maximum efficiency, look no further than this hydronic baseboard heater. The heater keeps on radiating warmth, even after the thermostat shuts off, due to its fluid-immersed, sealed heating element. Its low-profile design makes it a perfect fit for bedrooms, bathrooms, living rooms and dens. This heater is UL Listed for safe operation on flooring, tile or carpet, and its thermal cutoff function prevents overheating.

• Heat your space without kicking up dust or other allergens. The natural convection airflow doesn't rely on a blower or fan to move warm air throughout the room.
• Hydronic baseboards put out smooth, steady warmth without large temperature swings. Their sealed-tube heating element heats up quickly and stays that way, for a more stable room climate.
• Even after the thermostat turns off, this unit continues heating the room, thanks to its fluid-immersed heating element that better retains warmth to keep your room cozy for longer.
• This convection heater starts up and stops without the disruptive popping or pinging sounds given off by traditional baseboard models.
• For maximum efficiency, the unit converts all incoming electric energy into heat, according to Department of Energy standards.

User questions & answers

Question:	I need a heater that is 74" long 8"high do you have one that will match
Answer:	My system is 220. If your circuit breaker is a double one, you're dealing with 220 not 110.
Question:	square foot finished basement in NH. How many units are suggested to install
Answer:	Please contact the company direct you purchased from. Surplus City Liquidators does not see an order from you 800-428-4339 Q MARK ELECTRIC BASEBOARD SINGLE POLE THERMOSTAT, VOLTS:120/277VAC,AMPS:22, SINGLE POLE, TEMPERATURE RANGE:40F TO 100F, POWER SOURCE:ELECTRIC CORDED, DIMS:1 1/2"H X 4 1/2"W X 6"L, WEIGHT:14 OZ, IN MFG BOX, MADE IN USA.
Question:	Are these compatible with aftermarket covers? we are thinking of using something like this.. https://www.amazon.com/dp/b0757rwfz8/ref=sspa_dk_detail_
Answer:	This is a single pole thermostat for the Qmark 2500 series baseboard heaters. It has a black and red wire coming off the back.
Question:	Can anyone tell me if these heaters are economical or not? I understand that they heat the area in timely manner, but do they save coins
Answer:	The range is not expressed numerically. It as pictured from warm to warmer. I don't know of a residential line voltage thermostat with a range that high. We are not allowed to list manufacturers or sources as recommendations other than those which pertain to the listed product but I can tell you that there are commercial stats available for this application which would be remote mounted to achieve the range you refer to although I'm not sure the heater is up to the task. It is certainly not designed to function normally at those temperatures.

Product description

Radiant ceiling panels go where other comfort solutions can’t. With three mounting options, they can fit any ceiling space, helping to offset heat loss through perimeter windows and entrances. Install them in your bathroom, office or studio — anywhere you need to keep warm and conserve floor space for activities.

• Radiant heating is efficient, comfortable with no moving air
• Designed to surface mount on a flat ceiling, be recessed into a ceiling, or lay into a T-bar suspended ceiling
• Ceiling panels allows full use of wall and floor space
• Package Dimensions: 27.0" L x 27.0" W x 2.63" H

User questions & answers

Question:	What voltage are these
Answer:	110
Question:	hi, are these panels suitable for installing in bathrooms? any recommendation on the model types between amps/watts
Answer:	That’s where I have mine. Use it Amazon secondary heat source.
Question:	Given the nature of this heater, should it be controlled with a timer switch or a thermostat? Is either included with the heater
Answer:	Controls are not included with the heater. Either method is fine.
Question:	Is the electrical conection a plug in cord or hard wired? And can the conection be behind the heater
Answer:	Hard wired with approximately 3 ft. Whip of flexible metal conduit. It comes out the back of the panel from a metal 90 degree connector. The connector protrudes about 1 & 1/2 inches from the back of the panel.

Product description

The RCC Series cove heaters are versatile enough to provide heat for virtually any residential or commercial application.

• Radiant heating is efficient, comfortable with no moving air
• The unit mounts on the wall near the ceiling so it is out of the way
• Model number: RCC4512C
• The Package Weight Of The Product Is 4.0 Pounds

User questions & answers

Question:	Does this unit come with a remote control
Answer:	No, this did not come with a remote. Thermostat was bought separately.
Question:	Is this unit bright white
Answer:	white, bright as white tub or sink
Question:	can this be hardwired
Answer:	It has to be hard wired
Question:	How long is this heater? 36" or
Answer:	Several internet sources list the length as 34". I installed the one I got on a job and it will be a couple of weeks until I am in that area to actually measure the unit.
Question:	does this unit have a thermostat
Answer:	No it does not and this unit is a radiant convection over the window replacement heater that requires 220 volts to work. Electrician needed for sure.....Mark

Product description

This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you! It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3. 1 Gallons Per Minute, to provide hot water for your home family at multiple points of use! . Vent diameter-4 inches

At the higher flow rates you lose some of the temperature increase. So, they are more efficient at 2.7 GPM.

• It does not contain any fabrics.
• Imported
• Digital Temperature Display
• Compact design saves space and allows for easy installation just about anywhere
• Does not require electricity (operates with 2 D Cell battery)
• Only uses gas while water is flowing
• Saves water and up to 60% less electricity than conventional tank water heater, making it cost effective and

User questions & answers

Question:	how many lpm needed to ignite
Answer:	Sure, thers is a button to take off the reservoir, and you could clean it by a brush
Question:	Can this be connected to a 20 lb propane cylinder? I is the regulator and hose included
Answer:	This dental flosser comes 6 with tips: Classic Tip x 2, Brush Head, Orthodontic Tip,Tongue Cleaner, Periodontal Tip.
Question:	what is the btu
Answer:	I have a dental bridge so this is exactly what I need to clean underneath it. It works Works perfectly.
Question:	can I hook it to a chimney
Answer:	It is 12-1/2" tall, which is not particularly relevant to anything except storage. The important measurement is from where it clips onto the container: the container must be at least 6" deep (can be more, of course). It is just under 3" from the bottom of the unit to the min. mark and 5" from the bottom of the unit to the max. mark. How many inches from the bottom of your container will vary, depending on the container you opt to use with this.

Product description

For true zonal heating in a compact design that fits in anywhere, choose Qmark wall heater CZ2048T. Its fast-response heating element kicks in quickly, providing warmth for your bedroom, bathroom or hallway. The patented clip-n-fit system, thermal fuse and self-hold limit makes installing it on the wall safe and easy.

• Clean aesthetics and a compact Frame make this heater an unobtrusive solution for any space
• Warm up the room rapidly with this reliable wall heater. Its Fast-Response element delivers warmth instantly
• Get reliable zonal heating without cold spots. The unit's multi-layer impeller delivers consistent airflow in an energy-efficient design
• This unit features a self-hold limit to protect against overheating, with a one-time thermal fuse backup
• Patented clip-n-fit design allows you to lower the wattage at the point of installation to accommodate any space. Just clip out unnecessary jumpers and install
• Hard-wired unit. 240 volts, 2000 watts, 12.5 amps. Thermostat included

User questions & answers

Question:	Does it come with the on/off dial button
Answer:	The heater comes with a knob that rotates. Full counterclockwise turns the unit off. Turning the knob clockwise turns the unit on. Temperature is controlled by the amount of clockwise rotation. The knob on our heater falls off easily. We’re careful not to lose it!
Question:	grill size
Answer:	The size of the QMARK CZ2048T wall heater is 9" wide and 12 1/8 " high
Question:	Can you put this heater on a timer
Answer:	You could but you would have to have it wired into the circuit before the heater . you cant modify the heater though because you will void the warranty on it as well as voiding the UL listing on it too. I recommend installing the heater as it is supposed to be.
Question:	what square footage is this recommended for
Answer:	Measure length x width of the room or space giving you the square footage of the room. Multiply the square foot area by 10. (10 watts per sq. foot). Round up the result to the nearest wattage output of the heater. This is a pretty good calculator for sizing electric heat wattage to a room.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

The Eccotemp i12 Liquid Propane 3 GPM Tankless Water Heater has a new revolutionary design, making it unlike any other tankless water heater on the market today. The Eccotemp i12-LP is perfect for vacation cabins, cottages, and smaller homes. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. The i12-LP is also equipped with child locking technology. The Eccotemp i12-LP is a liquid propane powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. The i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Product Features

• Sleek, modern design with black tempered glass front panel
• Equipped with child locking technology
• Pulls about 2 watts idle and 1.07 Amps during operation
• Fully automatic temperature controls
• Horizontal Stainless Steel vent kit included
• Perfect for vacation cabins, cottages, and smaller homes
• Hot water capacity range: 0.6 - 4.8 GPM; Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

What’s in the box?

• 1 x 2 1/2" 90 degree Elbow with Backflow Preventer
• 1 x Wall Thimble
• 1 x 2 1/2" x 20" Termination Pipe
• 1 x Instruction Manual
• 1 x 110 volt UL listed power cord

• Whole home indoor, gas powered tankless water heater, rated at 4 GPM that activates only on demand and no pilot light needed, reducing energy consumption
• Sleek, modern design with black tempered glass front panel featuring an easy to use LED display controls
• Features fully automatic temperature controls with an energy saving mode and child lock technology
• Safe electronic ignition system; Plugs into standard 110v electrical outlet with UL-listed cord
• Uses standard 1/2" NPT water fittings and comes with horizontal venting allowing for a convenient and quick installation

User questions & answers

Question:	questions. does the fan run continuously? Is there a 12v version? thanks
Answer:	Hello. Yes, when the I12-LP is heating water, the fan will run. There is no 12v version of this model. Here https://www.amazon.com/dp/B009EDGTXG/ref=olp_product_details?_encoding=UTF8&me= is an indoor propane tankless heater with a battery ignition.GadgetsGo is an Authorized Eccotemp Dealer.Kind Regards,Ross KGadgetsGo
Question:	does it have an electronic pilot light
Answer:	Good Day, Dennis!Our Eccotemp i12-NG is a fully automated tankless water heater. There is no Pilot light, but the front panel display would tell you everything from ignition to full operation. Our i12 is a flow activated water heater.Thank you!Eccotemp Systems LLC
Question:	Does it run on propane? It came up in my search for propane tankless water heaters but it's not labled as such
Answer:	Yes, this uses propane and is labeled as such. LP means liquid propane. And the item description says, "Rated at an impressive 3 GPM, the Eccotemp I12-LP tankless water heater is a liquid Propane fired..."GadgetsGo is an Authorized Eccotemp Dealer.Kind Regards,RossGadgetsGo
Question:	How do these hook up without a hot water tank
Answer:	this takes the place of a hot water tank. there are connections for the water and gas and one plug to an outlet. it heats the water as it passes through the unit.
Question:	What model is recommended for whole house
Answer:	Hello. I'm sure any one would work, but I'd go with this larger capacity model. After having in for awhile, this one can output enough for 2 showers at full capacity, but one seems to be just a little restricted. If we installed some different shower heads I'm sure there wouldn't be any issues. For the minimal increase in cost, I believe the additional capacity is worth it. You may not always need it, but it's nice to know it's there if you do.
Question:	I live in lower michigan and what model is recommended for whole house
Answer:	Hi Sue Ann. Please refer to the sizing information in the second pic in Amazon's item description. It's very important to read up on tankless and how it works before purchasing. Key points to know: Your max. simultaneous hot water flow rate when everyone is using hot water. Whether you have enough amperage in your electrical panel. Most homes in USA require an upgrade to the electrical service which can cost several hundred dollars.Kind Regards,RossGadgetsGo
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:	Could it be the others are over priced or not produced in the volume these are?
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:	After having an electrician inspect the installation and unit, I was told the Eco 36 really should only be installed on a 300 amp service or above. It is a great unit, but for most homes trying to run it on a 200 amp service, it is too much of a draw on the electrical. It will cause flickering lights and will become a problem when your timing a full house with showers, laundry, dishwashing, etc. I love the unit, but my service is 200 amp, so I'll be removing this and installing a Rheem Electric Hybrid tank water heater.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

LED Display Controls

Turn off/on, adjust your desired temperature, measure GPM and more!

Energy Conscious

Uses virtually no energy while not in use. True on demand technology with low gas consumption.

Low Power Draw

While in use, the i12 uses around 2 amps. While idle it uses about 2 watts.

Product description

For true zonal heating in a compact design that fits in anywhere, choose QMARK wall heater CZ1512T. Its fast-response heating element kicks in quickly, providing warmth for your bedroom, bathroom or hallway. The patented clip-n-fit system, thermal fuse and self-hold limit makes installing it on the wall safe and easy.

• Clean aesthetics and a compact Frame make this heater an unobtrusive solution for any space
• Warm up the room rapidly with this reliable wall heater. Its Fast-Response element delivers warmth instantly
• Get reliable zonal heating without cold spots. The unit's multi-layer impeller delivers consistent airflow in an energy-efficient design
• This unit features a self-hold limit to protect against overheating, with a one-time thermal fuse backup
• Patented clip-n-fit design allows you to lower the wattage at the point of installation to accommodate any space. Just clip out unnecessary jumpers and install
• Hard-wired unit. 120 volts, 1500 watts, 12.5 amps. Thermostat included

User questions & answers

Question:	If the back box is 4 inches deep how will it fit between standard wall studs
Answer:	It will fit just fine as a 2X4 is 3.5" wide & your drywall or plywood is 1.5" to 3/4" thick.
Question:	What are dimensions
Answer:	Hi Julie it was listed in the Product DescriptionDimensions * Can / Back Box Width 7 7/8 inches * Can / Back Box Height 11 1/2 inches * Can / Back Box Depth 4 inches * Grill Width 9 inches * Grill Height 12 inches I hope this HelpsJarrod
Question:	Can't I just run a wire from an existing outlet to power this
Answer:	No. Needs to be hard wired.
Question:	What does "clip -n-fit feature and dual wattage and voltage" mean in the description? can this be set to run on 220vac
Answer:	the description is not quite accurate- the clip-n-fit feature is for thermostats on the register wall heaters (not this one) and it is not dual voltage- it is 120 volt only; dual voltage applies to the 240v model which can also run on 208 volts. It is dual wattage, it can be set for 1500 watts or 750 watts. the 220 volt models would be CZ1048T which is 1000/500 watts; CZ1548T which is 1500/750 watts; or the CZ2048T which is 2000/1000 watts