13 best heated tiles

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size

Controlled by OJ Microline's Intuitive Programmable thermostat to become one of the most versatile, easy to install heating systems

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary or secondary heat source

HEATING MAT FEATURES:

✔ Zero EMF (Electromagnetic Field)

✔ Double insulated, single cold lead

✔ UL listed for USA, suitable for wet locations

✔ Twin conductors, Alu foil sheath and ground wire

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ 120 Volt

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Large backlit display with Intuitive menu

✔ Other Modes: Child lock, Manual override & more

✔ Compatible with most radiant Floor Heating Systems

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle

Cable Monitor: Includes batteries

BENEFITS:

✔ Versatile, Fast & Easy to install, Easy to Use

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UDG-4999 Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The OJ Microline UDG promotes sleek modern design and intuitive control, making it easy to install and easy to use. The 120 Volt, 15 amp thermostat includes an integrated Class A GFCI (ground fault protection), External floor sensor, and offers Dual (air & floor) sensing capabilities. Features 7-day Program Schedule, providing maximum comfort, while reducing operating costs, power logging, child lock and more. cULus approved for USA and Canada. 3-year Factory Warranty.
• TECHNICAL DETAILS for Heated Mat - Size: 40 Sqft (20" x 24.40'), 12w/Sqft @ 3" wire spacing's (120v) 480w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	Can this be installed in a shower? Waterproof
Answer:	Hello, yes the LuxHeat system is rated for wet areas, however as with all heating for wet areas, the splice (joint between element/burgandy wire and cold lead/black wire), must be outside the shower. In the case of the mat, you can simply remove the tape holding the first 2-3 feet of wire and place the splice outside the shower by about 2 feet.
Question:	What is the actual length of the mesh? I'm finding 2 different answers
Answer:	Hello, the 20sqft mat is 12.2ft long by 20inches wide.
Question:	Does this need to be installed the mesh in a bed of mortar first or can I apply my mortar as I tile and do it all in one step
Answer:	Hello, you can apply your mortar as you tile, however if you choose this method to install you must make special effort to see that all wires are well covered with mortar. If a heating wire is not covered with mortar there will be no heatsink and the wire will run to hot. As long as the wires are well covered it'll be fine.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat mats can be cut, turned, flipped, or have wires removed to accommodate any room shape or size

Controlled by OJ Microline's Intuitive Programmable thermostat to become one of the most versatile, easy to install heating systems

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary or secondary heat source

HEATING MAT FEATURES:

✔ Zero EMF (Electromagnetic Field)

✔ Double insulated, single cold lead

✔ UL listed for USA, suitable for wet locations

✔ Twin conductors, Alu foil sheath and ground wire

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ 120 Volt

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ 5 year battery backup, retains all settings

✔ Other Modes: Child lock, Manual override & more

✔ 3.5” Colour screen with easy interactive Touch control

✔ 7-Day Program, pre-set program can be customized to suit one’s lifestyle

Cable Monitor: Includes batteries

BENEFITS:

✔ Versatile, Fast & Easy to install, Easy to Use

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UDG4-4999 Touch Screen Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• PROGRAMMABLE THERMOSTAT - The 120v Touch Screen OJ Microline UDG4 promotes modern design and intuitive control, making it easy to install and operate. Features include Dual sensing (air & floor), power logging, child lock, self-learning, 7-day Program Schedule with a 5-year program back-up - Providing maximum comfort, while reducing operating costs. Includes integrated Class A GFCI (ground fault protection) and external floor sensor. cULus approved for USA and Canada. 3-year Factory Warranty.
• TECHNICAL DETAILS for Heated Mat - Size: 70 Sqft (20" x 42.70'), 12w/Sqft @ 3" wire spacing's (120v) 840w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR WITHOUT COMPROMISING ON COMFORT

The luxury of a heated tile floor in the cold months is a pleasure that must be experienced to be truly appreciated

LuxHeat's wide range of 120v and 240v Heating Mats offer the ultimate in design flexibility - Mats can be cut, turned,

flipped, and when necessary, wires can be removed from the mesh to accommodate any room shape or size

The LuxHeat mat is controlled by OJ Microline's Sleek, Modern, Non Programmable, easy-to-use thermostat

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Under tile, stone, marble, laminate and engineered wood floors

HEATING MAT FEATURES:

✔ 10 Year manufacturer’s warranty

✔ Double insulated, single cold lead

✔ UL listed for USA - Classified as safe for Wet Locations

✔ 12watts/sqft @ 3" spacing provides optimal heat distribution

✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire

✔ Heater wire is less than1/8” thick, ensures minimal effect on finished floor height

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped

THERMOSTAT FEATURES:

✔ 120 Volt

✔ c UL us Listed

✔ GFCI Class A 5mA

✔ Dual sensing(Air & Floor)

✔ Load: 15A-1800w@120v, 3600w@240v

✔ Modern, Sleek design to compliment any room in your home

✔ Keeping it simple with OJ's Non-Programmable thermostat, no programming complications

CABLE MONITOR: Includes AAA batteries

BENEFITS:

✔ Recommended by Health Professionals for Allergy sufferers

✔ No unattractive heaters, storage hassles, maintenance, or smell

✔ Safe for Children, Elderly and Pets - No hot, exposed or moving parts

✔ Accurate and Intelligent control ensures your Personal Comfort and Affordability

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat Heated Floor Mat is best suited for installation under Tile, Stone, Laminate and Engineered Wood flooring. Heater Kit Includes - Self-Adhesive Heating Mat, OJ Microline UTN4-4999 Non-Programmable Thermostat with Floor Sensor and Built-in GFCI (Ground Fault Protection), plus Cable Monitor/Alarm.
• EASY TO INSTALL - The 3" Pre-spaced Electric Floor Heating Mat can be cut & turned, flipped or rotated - providing coverage where neded. With Self-adhesive mesh on one side and double sided tape on the other, the mat adheres to the sub-floor and lays flat even when flipped. The single point power connection makes for easy wiring, and the less than 1/8" heating cable ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - With a combined experience of over 50 years, the LuxHeat Tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty - providing Peace of Mind and an assurance of performance for many years to come. LuxHeat's radiant floor heat Cables and mats are UL approved and Safe for Wet Locations.
• NON-PROGRAMMABLE THERMOSTAT - The OJ Microline UTN4 promotes sleek modern design and intuitive control, making it easy to install and easy to use, ideal for those who like to keep it simple. The 120 Volt, 15 amp, thermostat includes an integrated Class A GFCI (ground fault protection) and offers Dual (air & floor) sensing capabilities. OJ Microline thermostats are cULus approved for USA and Canada, supported by a 3-year Factory Warranty. Box includes 10Kohm Floor Sensor.
• TECHNICAL DETAILS for Heated Mat - Size: 25 Sqft (20" x 15.20'), 12w/Sqft @ 3" wire spacing's (120v) 300w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Cable Monitor/Alarm includes 2xAAA batteries.

User questions & answers

Question:	How can you cut it
Answer:	Hello, you can cut the mesh between the heating wires, this allows you to rotate or flip the mat when there is a need to change direction. A portion of the wires can also be removed from the mat if there is a need to get into small spaces, however you must ensure the spacing between the loose wires is the same as the mat. The wattage of the heating wire is based on the length of the cable, if the cable is cut it'll change the heaters output........please do not cut the heating wire.
Question:	How hot does this get and can use it under a counter in the kitchen
Answer:	Hello, the LuxHeat heating system is UL approved for floor heating only, I wouldn't recommend it for a counter top. There are other self-regulating heat-tape options that would be better suited for that application.

Product description

Heated Floor Membrane Sheets Ditra Duo Heat Uncoupling

FUTURE-PROOF YOUR INVESTMENT

Wear and tear can’t be avoided when it comes to structures. But there’s good news - these nuisances can be kept to a minimum. Tiled floors, walls and other surfaces can last for long with the addition of underlayment membranes that prevent cracks and fractures from breaking through. Protect your precious home investment with high quality Uncoupling Membranes.

More Excellent Material

This tile underlayment adopts excellent polyethylene material(thickness: 1/5"). Much thicker than most products and has better quality.

1. Upgrade HDPE Material
2. Water & Crack-Resistant
3. Other Functions
4. Simple & Quick Install
5. Color: Red
6. Material: Upgrade HDPE Material
7. Product Size: 3.3x16.5 ft
8. Covering Area: 54 sq ft
9. Thickness: 1/5"

• HDP
• 【Heated Floor Uncoupling Membrane】The distinguishing feature of Schluter- HEAT Floor Uncoupling Membrane is the existence of free space created by the configured channels on the underside of the matting. The free space provides a route for excess moisture and vapor to escape from the substrate that could otherwise cause damage to the tile layer above. Thus, Heated Floor Uncoupling Membrane effectively manages moisture beneath the tile covering.
• 【Professional Wood Houses】This uncoupling underlayment serves with functions like uncoupling, waterproof, vapor management, and dense load distribution. It can functionally lengthen the service time of wooden houses.(Located in CA , United States, shipping in 1~2 business day, 3~5 day business days to arrive in your place)
• 【Simple & Quick Install】It can be installed under the floor of the bathroom & kitchen. Thinset mortar and laminate tape are recommended for a moisture sealed and crack-proof finish. Only one person can finish this job.
• 【Waterproofing】Heated Tile Floor Underlayment Roll provides reliable waterproofing in interior and exterior applications. Its polyethylene composition protects the substrate from moisture penetration, which is particularly important in today's building environment where most substrates are moisture sensitive.
• 【Prevent Fractures And Cracks 】 Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. Our Uncoupling Membrane provides uncoupling through its open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT. 

The luxury of a heated tile floor in the cooler months is a pleasure that must be experienced to be truly appreciated.

LuxHeat's Radiant Floor Heating Mat is one of the most versatile, easy to install, floor heating systems available on the market today.

The heating mats can be cut, turned, flipped, or have wires removed, to accommodate any room size or shape.



BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities 

★ Installs under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary heat source or secondary, it doesn't have to be below Zero to enjoy a warm floor.



PRODUCT FEATURES:

✔ A wide range of mat sizes, available in 120v and 240v

✔ LuxHeat mats are UL listed for USA, complies with US safety standards

✔ Come with double insulated, single cold lead wire for easy runs and connections

✔ Heater wire is less than 1/8" thick, ensures minimal effect to finished floor height

✔ Zero EMF (Electromagnetic Field) Twin conductors, Alu foil sheath and ground wire

✔ At 12watts/sqft @ 3" spacing, the LuxHeat heat mat provides optimal heat distribution

✔ Self-Adhesive mesh on one side and double sided tape on the other, ensures mat stays flat even when flipped over.



BENEFITS:

✔ Recommended by health professionals for allergy sufferers

✔ Safe for children, elderly and pets - No hot, exposed or moving parts

✔ Accurate and intelligent control ensures your personal comfort and affordability

✔ Self-Adhesive mesh and tape makes for easier & faster installations, lays flat and stay flat, no need for staples and glue.

✔ Completely out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance, silent, no smell, and no moving air to stir up dust.

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install electric floor heating system. Ideally suited for installation under tiles, stone, laminate and engineered wood floors. UL listed as Safe for wet locations.
• EASY TO INSTALL - The pre-spaced electric floor heating mat reduces installation time by up to 75% when compared to conventional lose lay systems. Adhesive backing ensures mesh lays flat. Cable's less than 1/8" diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - Combined experience of over 50 years, the LuxHeat tech team offers a wide range of high quality, UL Certified products . A 10-Year Manufacturers warranty's - providing peace of mind and an assurance of performance for many years to come.
• VERSATILE - By cutting the mesh only, the radiant floor heating mat can be both flipped or rotated, ensuring warmth in the desired areas. Heater wire can also be removed from the mesh to get into those difficult to reach areas.
• TECHNICAL DETAILS for heated mat - Size: 200 Sqft (20" x 122.00'), 12w/Sqft @ 3" wire spacing's (240v) 2400w. Twin conductor heating wires, and drain wire with Aluminium sheath , ensures ultra low EMF. Includes floor sensor, compatible with most floor heating thermostat.

User questions & answers

Question:	Could I use a vinyl floating floor on top? If so do I use a leveler on top
Answer:	Hello, yes most vinyl flooring can be used on top of this type of heating system however it is always best to check with your vinyl flooring manufacturer to see if their flooring is compatible with floor heating. The heating elements must be completely covered with a leveler to ensure there is no direct contact between the heating element and the underside of the vinyl, the leveler also ensures even heat distribution.
Question:	Can install 2 sets of 200 sq ft in one thermostat
Answer:	Hello, the 200sqft mat uses 2400watts, most 240volt thermostats have a 3600watt (15amp) limit. You can however add a power relay to the thermostat to increase total load availability, depending on amperage of relay you could then connect the second 200sqft mat. I'd suggest involving and electrician to check all supporting wiring is sufficient.
Question:	can it be used in bathrooms
Answer:	Hello, yes the LuxHeat mat is approved for wet areas (bathrooms). As with all electric floor heating systems it's important to keep the join (connection between Burgundy heating wire and black cold lead) outside of the shower. If the mat is used in the shower area it's advisable to remove 2-3 feet of cable from the mat to ensure join is 2 feet outside shower.

Product description

ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT

The luxury of a heated floor is a pleasure that must be experienced to be truly appreciated

LuxHeat's wide range of 120v and 240v loose-lay cables offer the ultimate in design flexibility, allowing for custom configurations and easy installations

BEST SUITED FOR:

★ Residential homes, Office apartments and Senior living facilities

★ Installs under tile, stone, marble, laminate and engineered wood floors

★ Can be installed as primary heat source or secondary, it doesn't have to be below Zero to enjoy a warm floor

PRODUCT FEATURES:

✔ A wide range of cable sizes, available in 120v and 240v

✔ LuxHeat cables are UL listed for USA, classified as safe for Wet Locations

✔ The Double insulated, single cold lead makes for easy run and connections

✔ At 12 watts/sqft @ 3” spacing, the LuxHeat cable provides optimal heat distribution

✔ The heater wire is less than1/8” thick, ensures minimal effect on finished floor height

✔ Ultra low EMF (Electromagnetic Field) Dual conductor Tech, Alu foil sheath and ground wire

✔ 10 Year manufacturer’s warranty, provides peace of mind and an assurance of performance for many years to come

✔ Elements are ETFE insulated and covered by a tough outer jacket, providing additional protection against abrasion and corrosion

BENEFITS:

✔ Recommended by health professionals for allergy sufferers

✔ Safe for children, elderly and pets - No hot, exposed or moving parts

✔ Accurate and intelligent control ensures your personal comfort and affordability

✔ Completely out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance, silent, no smell, and no moving air to stir up dust

WATT DENSITY:

★ 14.00w/sqft @ 2.6"

★ 12.00w/sqft @ 3"

★ 10.30w/sqft @ 3.5"

★ 9.00w/sqft @ 4"

 

• LUXURY AND COMFORT - Enjoy the warmth of LuxHeat's easy to install Electric Floor Heating System. The LuxHeat floor heating cable is best suited for installation under tile, stone, laminate and engineered wood flooring. Kit Includes - Heating Cable, 10 kohm Honeywell Floor Sensor and Alarm/Monitor for heater wire installations.
• VERSATILE - LuxHeat's range of loose lay/ free-form underfloor heating cables offer unlimited design flexibility, customized configurations ensure warm floors for any shape or size room. Single point power connection makes for easy wiring. Heating wire at less than 1/8" diameter ensures minimal effect on finished floor level.
• QUALITY & EXPERIENCE - Combined experience of over 50 years, the LuxHeat tech team offers a wide range of high quality, UL Certified products . Includes 10-Year Manufacturers warranty, providing Peace of Mind and an assurance of performance for many years to come. LuxHeat' radiant floor heat Cables and mats are UL listed and Safe for Wet Locations.
• ENJOY the Practicality, Durability and Beauty of hard floors, with the comfort of LuxHeat's in Floor Heating System. LuxHeat heating Cables can be installed as a primary or secondary heat source, it doesn't have to be below Zero to enjoy a heated floor. Used in Residential homes, (bathroom, kitchen, living area, basement, etc), as well as Office apartments, Senior living facilities and more
• TECHNICAL DETAILS - Cable Length: 60ft. 180watts (120v), 1.5 Amp. Coverage: 15 Sqft @ 3" spacing - 12w/Sqft. Dual wire technology, and drain wire with Aluminium sheath, ensures ultra low EMF. Single armoured cold lead. LuxHeat will provide the right under tile floor heating system for you.

User questions & answers

Question:

What type of thermostat should I purchase

Answer:

Hello, we have a couple of OJ Microline thermostat options, they range from the basic non-programmable thermostat to the top of the range Programmable Touch Screen with Wifi. Below are some options on Amazon. UTN4 - Non-Programmable: ASIN B086WY444L UDG - Programmable: ASIN B084GXTZDS UDG4 - Programmable Touch Screen: ASIN B07W59R5X9 UWG4 - Programmable Touch Screen with Wifi: ASIN B0858G9B21 Alternately we have a LuxHeat kit that includes a thermostat - Search 'LuxHeat Floor Heating' for the different kit variations.

Product description

This is a limited quantity launch. Buy yours while supplies last.



Live better and save more with ecobee3 lite. With its beautiful design, easy-to-use touchscreen display and impressive average savings of 23% annually on heating & cooling, the ecobee3 lite will make your home smarter and more comfortable without costing you or our planet. *Learn more at ecobee.com/savings.



Works with Amazon Echo, Apple HomeKit, Samsung SmartThings, and IFTTT. We want you to love our products as much as we do, so your ecobee comes backed by a 3-year warranty.

• Works with Alexa for voice control (Alexa device sold separately).
• Save an average of 23%* on heating and cooling costs (*Learn more an ecobee.com/savings)
• Your ecobee3 lite powers on through the C and Rc terminal. Be sure to insert your R/Rc/Rh wire in the Rc terminal of your ecobee3 lite thermostat.
• Fast, easy installation - install your ecobee in 30 minutes or less. The step-by-step guide on our mobile app and free expert support make it easy.Smarter comfort - your ecobee understands your local weather, schedule and desired comfort settings, to ensure your home is at the right temperature at the right time
• Personal energy reports - get free monthly reports on how much energy you’ve saved and tips on how you can save even more
• Peace of mind - your ecobee monitors your heating and cooling systems and alerts you If it senses that something isn’t working properly. Refer userguide before use
• ASIN B01K48T09Y has a newer model B06W56TBLN

User questions & answers

Question:	Will this work with Wink
Answer:	I am sorry, i have not installed them yet, but according to the manual, you can have outside temperature sensor, and return air temperature sensor, but no additional room temperature sensors.
Question:	If i set it to lets say 76 degrees, when will it turn on the a/c and turn it off? would it be at 77 and 75? i know the nest range is too wide for me
Answer:	8910W works just fine without WiFi, you just cannot manage it via the phone app or web. Yes it should reconnect when WiFi comes back. I occasionally (every 1-2 months) reboot the WiFi access points when upgrading their firmwares, and the 8910W reconnects just fine.
Question:	what if you have more than one zone? I have 3 zones, would i need to by one thermostat for each zone
Answer:	Hello, our model 8910W requires 24VAC to operate. R and C can be powered from the HVAC equipment transformer or any other constantly powered 24VAC source. Feel free to contact our technical support team at 1-800-334-6011 if you have more questions. Thank you.
Question:	What is the exact difference between this and the ecobee3? this has still not been answered well, what will i miss out on
Answer:	Hi D. DeBartolo,That's a great question. You would be able to adjust the span setting via the iDevices Connected App. The span regulates how long the equipment runs and how long it waits between runs. So a larger span will result in longer runs, longer off times, and fewer cycles. Hope that helps! Please contact us directly if you have more questions at 888-313-7019 or [email protected]

Product description

No more cold feet! Keep those feet toasty and warm all winter long with our portable electric warming mat! The Cozy Foot Warmer quickly heats to 150 degrees Fahrenheit, and can warm your cold feet even through shoes and boots, and can be used to melt snow from your feet. This small yet powerful warming pad contains an electric heating element that produces a uniform radiant heat, and is controlled by a built-in thermostat that ensures a constant, consistent temperature is maintained while in use. Rugged, waterproof design that is built to last. The durable design of our foot warmer mat makes it a great choice for warehouse or garage use, and is a practical solution to keep feet warm, especially when performing tasks while standing in one place. The Cozy Foot Warmer melts ice away quickly and can stand up to high foot traffic and heavy duty work boots. Designed to meet strict safety standards. Created specifically to meet the strict TUV standards, our Cozy Foot Warmer features a unique heating element that is carefully enclosed within the rubber material to eliminate the danger of fire or risk of electrical shock. Many offices have banned space heaters altogether - Cozy Products meet rigorous safety standards that make them office-friendly and energy efficient. Specifications: Dimensions: 14" x 21" x 1", Weight: 8 lbs, 120 watts, 120 volts, Cord Length: 9', 10". As with any new heated rubber product, the rubber odor may be quite noticeable when plugged in for the first time. This is temporary, and will dissipate quickly, especially with consistent use. Due to the strength of this heater, it is not recommended for use on delicate floors such as hard wood, linoleum, area rugs, or carpet. Warning: This product can expose you to chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

As anyone who's been out in the cold knows, toasty feet go a long way toward keeping the rest of you warm. That’s why using an Indus-Tool FW cozy foot warmer can help reduce your indoor heating costs. At only 90 watts, one of these units tucked under a desk allows you to turn the building thermostat down, thereby saving you money. The warmer is less costly to use than a space heater, and safer, too, as there are no exposed heating coils or carbon monoxide emissions. It is ETL listed.--Josh Dettweiler

What’s in the Box

Foot-warmer pad, power cord

From the Manufacturer

THE COZY ADVANTAGE: Safe, Economical, Green, Effective. Cozy Products offers energy-efficient, low-watt personal heaters that conserve energy, prevent circuit overloads, and reduce the risk of fire. Based in Chicago, IL Cozy Products have provided a superior level of quality for decades.

• KEEPS TOES TOASTY: Our personal warming mat uses direct and radiant heat, quickly heats to 150 degrees Fahrenheit, and can warm your cold feet even through shoes or boots, and can be used to melt snow from your feet!
• SMALL, PORTABLE DESIGN: Our small heated footrest is easy to transport, travel-friendly, and can be rolled up for convenient, compact storage; Take with you on roadtrips, to your cabin, and on winter vacation!
• WATERPROOF RUBBER MATERIAL: Our durable heating pads can be used on hard, cold surfaces such as cement, tile, stone; DISCLAIMER: Not recommended for direct use on carpet, hard wood, linoleum, or other delicate surfaces. These surfaces could become discolored if in direct contact with The Cozy Foot Warmer.
• ENERGY EFFICIENT: The Cozy Foot Warmer uses only 120 watts, which is just a fraction of the energy that a traditional space heater uses; Our foot warmer is TUV Listed to meet strict safety standards; Completely silent, noise-free performance
• VERSATILE USE: Use our Cozy Foot Warmer to keep feet warm anywhere; Great for cold garage, bathroom, and kitchen floors; Can also be used in cars, RVs, and other vehicles

User questions & answers

Question:	What size is it
Answer:	20 1/2 inches x 13 1/2inches
Question:	is there automatic shutoff if we leave absent miindedly leave it on when not in use
Answer:	It does not, however, the On/Off switch is lighted so it is easy to visually tell whether it is on or not. I use mine under my computer desk on a basement tile floor. Since their switch is on the cord I do not find it convenient to use since it is difficult to reach back under the desk. I leave it turned on (I can still see the light) but I have the cord plugged in to a small power strip located on my desk top that has it's own On/Off switch that is also lighted to then control the mat. I like you tend to sometimes be forgetful about turning it off, however as someone else remarked, it doesn't get so hot that it poses a fire hazard. Having the easy access desk top switch does come in handy though. If you sit with your feet on it long enough they can begin to feel hot and it is nice to be able to just easily cyle it off for awhile. Having the lighted power strip on the desk top definitely makes an easier reminder to turn the mat off when shutting everything else down.
Question:	What temp does this get to
Answer:	It gets too hot for my feet, and does not have a temp control. I have mine plugged in to a lamp dimmer and usually use it at about 2/3rds of maximum (about 60 watts instead of 90).
Question:	Can it be used on wood flooring
Answer:	PLACEMENT For use on concrete, stone or tile floors. Do not use on carpeting or wood floors. Take care as to what type of surface you place the mat on – some delicate surfaces may discolor or crack from even this gentle heat. If you are not sure, place some cardboard under the mat for insulation.

Product description

The SunTouch TapeMat Floor Heat Kit contains everything needed for a quick and economical installation of a radiant heat flooring system. TapeMat is an open-weave floor heating mat that can be easily installed beneath tile, stone, or laminate flooring in homes and commercial buildings to bring comfort and a touch of luxury to your space. The mat installs in thin-set or self-leveling mortar. This kit includes a 120 VAC floor heating mat that measures 2 feet wide x 5 feet long and covers a 10 square foot area. The orange mesh can be cut with scissors and flipped to cover and fit your layout. The blue wire can be pulled out and run around obstructions and awkward spaces. Please note the blue wire should never be cut. This kit also includes a SunStat Command programmable touchscreen thermostat, LoudMouth installation monitor, double-sided tape, and an installation manual.

• TapeMat easily installs beneath tile, stone, or laminate flooring in homes and commercial buildings
• Kit includes mat, touchscreen programmable thermostat, floor sensor, and install accessories
• 2’ x 5’ customizable mat fits rooms of all shapes and sizes
• 1/8” thick cable. Connects to 120 volt AC power
• Double-sided tape adheres to subfloor and lays flat for fast layout. Safe and easy one-step application with thin-set or self-leveler

User questions & answers

Question:	If the mat is too long, can you cut it to fit the space
Answer:	You can trim the backing mat, but can not cut the heating wire.
Question:	Can you cut the Tape Mats
Answer:	Hello,The mats can be cut and modified to fit any shape of room. The orange mesh can even be completely cut away and the wire be used by itself as long as you maintain the 3" spacing. The BLUE wire can NOT be cut or shortened. Good luck on your installation!
Question:	Can you confirm the thermostat model? Item title has a 500850, item description says
Answer:	This Kit includes the Command 500850 thermostat when purchased from WarmYourFloor, as shown in the image. Other sellers may have old stock with the old thermostat 500775, at a different price. Sorry for the confusion on the description, but the title is correct when purchased from WarmYourFloor, http://www.amazon.com/SunTouch-Programmable-Thermostat-Temperature-Installation/dp/B003FIBP6C/ref=sr_1_5?m=A2AZVIVOJYQ3SW&s=merchant-items&ie=UTF8&qid=1451751944&sr=1-5&refinements=p_4%3ASunTouch the Thank you for the question.
Question:	How many watts while heating
Answer:	Suntouch mats provide 12 Watts per Sq Ft, so a 30 Sq Ft mat = 360 Watts

Product features

Install Anytime, Anywhere

• The SunTouch product line includes options for above subfloor, between joist bay, or concrete embedded systems
• Systems are available for warming tile, stone, wood, laminate, and other floor coverings

Proven Reputation

• With over 30 years of experience designing electric floor heating systems, you can feel confident choosing a SunTouch system
• We have a proven reputation with thousands of successful installations across North America

Many Different Features

• Options for display color themes, remote access, large touchscreens, and control of floor or air temperature
• Reduce energy cost with innovations like an outdoor reset in the SunStat Connect

SunTouch TapeMats come with double-sided tape on each side and an attached 10 ft powerlead

SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile. You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s) to the subfloor using the double-sided tape, secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.

Programmable Thermostat to Maintain Accuracy

• Built-in 15-amp relay controls up to 150 sq. ft. (1800 watts) at 120 V, or 300 sq. ft. (3600 watts) at 240 V
• SmartStart Technology automatically adjusts the start time of the floor warming system to ensure the floor has reached the set temperature at your scheduled time.
• Energy Use monitor shows the hours of system operation.

Make Sure Your System is Working Properly!

You can have peace of mind knowing that your floor heating system is in working order by testing the resistance of the heating elements with a Digital Multi-Meter.

Each cable has a UL tag on the power lead with a resistance (Ohm) range printed on it. Set the Multi Meter to 200 Ohms (2k if the Ohm range is over 200) and test the colored power lead wires. Then test the colored wires against the copper ground wire to make sure there is no resistance on the ground.

• 10 Square Foot Under Tile Heating Mat, Mat is 20” Wide x 6’ Long, 120 Volts
• Mat has double sided tape (Adhesive Backing) to stick to floor. Lays FLAT for easy installation.
• 120V, 1 Amp, 120W, 12 Watts/Sqft, UL Listed for USA and Canada, Cable is 1/8” thick
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 Year Warranty

User questions & answers

Question:	I need 24" x 60".. Can I route the last one feet wire along the side to increase the width to 24" and keep the length to
Answer:	You can loosen the heating element from the mesh and put along side the mat keeping it at 3" spacing.
Question:	I am planning to install wooden floor (hardwood or laminate) in my bathroom. Can I use this system to heat wooden floors or is is for tiles only
Answer:	The floor heating system can be installed under laminate or engineered wood floors, but not a traditional wood floor in which you are nailing down the floor because of the risk of putting a nail through the wire. Regardless of the flooring type, the floor heating system must be completely embedded in a polymer modified cement based mortar.
Question:	I have a concrete slab that I would like to add electric floor heating and tile over it. How do I avoid moisture build up with this product
Answer:	You need to seal your concrete floor! Theres a great product on amazon here that gets down into concrete and seals up everything--it even pushes dirt and moisture out as its sealing! and you just spray it on. Its advertised to block radon, but its all the same different of sealing concrete (will make moisture barrier, block radon, etc.) I think its just called "Radonseal" and its in a big bucket; you'll also need a 1 gallon sprayer, they run about ten bucks. I would seal it before installing this product, as you'll get a lot more out of it. You'll still want to cover it with something so it can distribute its heat (like put in thinset or something like that) it doesn't have to be fancy tile. I did mine in thinset and threw a rug over it to make a warm place for my pets while i'm at work.
Question:	Can this be used when installing a drop-in tub to keep bath water warm
Answer:	No, but Kohler has a tub that has a built in heating element on the portion where you lean up against. I don't know how well it would heat the water, but I bet it would be nice.

Product features

Floor Heating Mat

The Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat. Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat with floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volts, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• A mode controls the ambient air temperature
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar. If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

ADHESIVE BACKED MAT

This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peal of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

Mat Turns and Fill-in Techniques

• This table contains some of the common turns and techniques used to layout around corners, angles, and built-ins.
• Carefully cut the white mesh to make turns. Never cut, nick, or otherwise damage the heating wire.

• 20 Square Feet Heating Mat, 20 Inches Wide x 12 Feet Long,Includes Required GFCI 7 Day Programmable Thermostat - 120VAC
• Highest Quality USA Heating Cable Designed for Longevity by an over 20 Year USA Manufacturer
• Listed and Safe for Wet Locations.Thin profile ~1/8" thick. Multiple Configurations, Adheres to the Floor.
• ETL Listed for US & Canada - Limited Lifetime Warranty by an over 20 Year Trusted USA Manufacturer
• Voltage: 120V - Amps: 2 - Watts: 240 - 15 ft Cold Lead - 12 Watts/Sqft

User questions & answers

Question:	Can you install this in concrete in an outside location
Answer:	No, its not really designed for that application. The watt density is too low to melt snow.
Question:	Is there a negative effect if I put together more than 100 sq ft on 1 thermostat? I want to do an entire basement nearly 1000 sq ft
Answer:	I wouldn't think a thermostat would be affected by more than one mat, as long as they are connected. Perhaps it would be of benefit to use more than 1 thermostat so you could create "zones". Fyi... this will not heat the room, only the floor. Good luck.
Question:	Do you have installation instructions or some video posted somewhere how its set into mortar prior to tile and so on? would be very helpful. Thank you
Answer:	Hi Geroy, we typically recommend the industry best practices for manufactured products you are using. Many of the thin set/mortar manufacturers have videos on you tube of how to apply the thin set or mortar. I think the best method is to use a self leveling product over the heating cables first before the main tile installation. This protects the heating cable from the notched trowel that is required for tile and essentially it looks like a regular floor without heating cable. Please call is if you have any questions during the installation, we have stellar tech support!
Question:	Can you cut the end if you have too much and terminate it
Answer:	The cable in the mesh cannot be cut, but the cable can be removed from the mesh material to make a free flowing cable to get around obstacles. These cables have a factory determined resistance and cutting the cable would change the output of the system and most likely cause a fault to occur. The nice thing about the free flowing cable systems is that you can change the spacing in order to fit pretty much any square footage desired. We try to offer as many sizes of mats as possible.

Product features

Programmable Thermostat

Heatwave standard thermostat (M429) specifications:

• Up to 4 event programming
• Simple user interface
• Pre-programmed for quick set up
• Multi voltage: 120/208/240 V
• Output Relay 15A
• Can be set to automatic, manual, or comfort mode
• Includes 2 sensors: a built-in air sensor and floor sensor thermistor with 10 feet of NTC (12K) sensor cable
• Temperature control range: 41ºF to 104ºF
• Class A GFCI (5 mA trip level)

An Efficient System

The Heatwave system comes with a 10-foot long floor sensor standard for optimal use of your Heatwave System. Extra compatible sensors are available on our store page.

Fully Embedded System

Heatwave can be embedded in various types of cement-like material, allowing for several floor covering options. Embedding Heatwave allows for optimal heat dispersion and gives the end-user a nice, consistently warmed floor.

Be sure to get the right size!

Heatwave comes in various sizes to accommodate differing size spaces. It is important to accurately measure the space you intend heat. Avoid placing the heating cable under vanities, within 6-inches of the toilet gasket and under other permanent fixtures in the space. It is acceptable to place Heatwave in a shower, provided that is still fully embedded in a thinset/or Mortar.

Be aware the heating cable cannot be cut or shortened in anyway.

Product description

Uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control and thermal break. This membrane is designed to work with heated floor cables to create warm tile floors and is .25" thick.

• Uncoupling and waterproofing
• Allows heated cable to be snapped into place
• Reduces heat loss and quickens heat up time of heated cable
• Quick and easy install

User questions & answers

Question:	What kind of thinset is need for this? Modified or Unmodified? Thanks
Answer:	Yes. It prevents cracks in the concrete from transferring to the tile.
Question:	Is this a kit of floor and heating cables? Does the thermostat come with it? No details on this page
Answer:	No
Question:	what type of adhesive do i use
Answer:	No, the DH5MA membrane from Schluter is designed for floor heating.
Question:	What type of adhesive do i use
Answer:	The first answer is WRONG ! Schluter Kerdi is a water proofing membrane that works on floors and walls over a suitable substrate. Ditra is an uncoupling membrane designed for floors, that are adequately stiff. It replaced concrete board, which does nothing to stiffen a floor.

• 30 Sqft Cable with Digital Programmable Thermostat, Electric Floor Heat Warming System
• Includes Plastic Cable Guides and Installation Monitor
• 120V, 3.0 Amps, 360W, 12 Watts/Sqft, UL Listed for USA and Canada
• Honeywell/Aube Digital Programmable Thermostat # TH115-AF-120, Includes floor sensor
• Made in the USA using the highest quality materials, Single Cold Lead, 25 year Warranty

User questions & answers

Question:	How many linear feet does this include
Answer:	A 40 sq. ft. cable system is 160 linear feet of wire.
Question:	Is the thermostat's light always on? Trying to decide if we will put the box in our bedroom but don't want any light coming out of it at night
Answer:	No the light only turn on when you push buttons on the thermostat
Question:	What is the wattage (or amps) specification for 200' (50 sq ft) of heating wire
Answer:	A 50 sq. ft. 120V cable system is 5.0 Amps and 600 Watts.
Question:	Can this be installed under the subfloor between joists? I do not want to rip up my existing tile and have basement access
Answer:	No, our floor heating systems are to be installed on top of the subfloor and must be embedded in a polymer modified cement based mortar.

Product features

Floor Heating Cable

The Electric Floor Heating Cable consists of a spool of heating cable.  Simply run the cable 3" apart across the area to heat using the cable guides to secure to the floor running the cold lead up the wall to the electrical box.  These heating systems are ideal for odd shaped areas or to heat around objects.  The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.

Programmable Thermostat with Sensor

Honeywell / Aube model # TH115-AF-120S

The programmable floor sensing thermostat and floor sensor is designed to work with electric floor heating systems. It gives you the ability to accurately control the floor temperature for maximum comfort and energy savings. The thermostat features high-tech precision with straight forward, user friendly interface and contemporary design with backlit display. This floor sensing thermostat is digital, programmable, and includes the floor sensor. The thermostat is factory pre-programmed with a 7 day schedule that can be adjusted. This thermostat is 120 volt, rated for 16 amps, easily switching between F and C temperature scales.

THERMOSTAT FEATURES

• AF mode-controls ambient temperature with floor temperature limitation
• F mode controls the floor temperature using an external temperature sensor
• Two temperature sensors-one in floor, one in thermostat for accuracy and security

Installation Monitor

The Installation Monitor can help give you peace of mind while installing the floor warming system.  Connect the system leads to the monitor prior to installation.  The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.  If the alarm sounds, stop work and consult the operation manual.  We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.

• Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system
• A white light indicates the monitor is operating
• Can monitor up to 3 systems at one time when they are temporarily connected in series

CABLE GUIDES

Designed for fast installation of the the heating cable, simply loop the floor heating cable around the guide as you lay the cable system across the subfloor.

Secure the cable guides according to the planned layout using screws, nails, adhesive or glue approved for use with the given subfloor.  The heating element should be spaced 3" apart across the area to be heated.  Cable guides should be run perpendicular to heating cables.  The heating cables should have a minimum distance of 2" from walls and objects. Spacing between cable guides should not exceed 36" in distance.  Secure the heating element to cable guides by wrapping the wire around the stud.  Maintain moderate tension of cable throughout installation.  Do not twist heating element and keep the minimum bending radius of the cable to 1".

Cable guides are 12" long and can be cut to length. Includes enough cable guides for cable heating system.

MADE IN USA

Warming Systems is proudly Made in the USA. Our manufacturing facility and offices are located in Spring Grove, IL (just outside of Chicago). Our systems are made from the highest quality products and offers the best heating technology on the market.