12 best roof attic fans

Roof attic fans, also known as attic ventilators or attic exhaust fans, are ventilation systems designed to regulate the temperature and moisture levels in the attic space of a building. Here's what you should know about them:

  1. Purpose: Roof attic fans serve two main purposes: to reduce heat buildup in the attic during hot weather and to prevent moisture buildup and condensation during colder months.

  2. Heat Regulation: In warmer climates or seasons, attics can become excessively hot, which can lead to increased energy costs and potential damage to roofing materials. Attic fans help by expelling hot air from the attic space, which can help lower the overall temperature of the building.

  3. Moisture Control: During colder months, warm, moist air can rise into the attic and condense, potentially leading to issues like mold growth and damage to insulation.Attic fans help to expel this moisture, maintaining a drier and healthier attic environment.

  4. Types of Fans:

    • Electric-Powered: These are the most common types and are usually connected to a thermostat or humidity sensor, so they turn on and off automatically as needed.
    • Solar-Powered: These fans are powered by solar panels, making them energy-efficient and environmentally friendly.
    • Wind-Powered: These fans use natural wind flow to create ventilation, eliminating the need for electricity.
  5. Installation: Roof attic fans are typically installed on the roof, near the peak, and are often placed in the gable or dormer vents. Proper installation is crucial for effective operation.

  6. Sizing: The size of the attic fan should be determined based on the size of the attic space. Too small a fan may not provide adequate ventilation, while a fan that's too large can lead to excessive heat loss in colder climates.

  7. Thermostat and Humidistat Control: Many modern attic fans are equipped with a thermostat that automatically turns the fan on when the attic temperature rises above a certain level. Some also include a humidistat to control moisture levels.

  8. Benefits:

    • Energy Efficiency: By reducing the heat load in the attic, roof attic fans can help lower the overall cooling costs of a building.
    • Prolonged Roof Life: Proper ventilation can help extend the lifespan of roofing materials by preventing excessive heat buildup.
    • Reduced Moisture Damage: By expelling moisture, attic fans help prevent issues like mold growth and rot.
  9. Maintenance: Attic fans should be inspected periodically for any debris or obstructions that may hinder their operation. Motors and blades may also require occasional maintenance or replacement.

Remember that while roof attic fans can be very effective, it's important to ensure they are properly sized and installed to provide the most benefit without causing unintended consequences, such as excessive heat loss during colder months. Consulting with a professional or following manufacturer guidelines is recommended for installation and usage.

Below you can find our editor's choice of the best roof attic fans on the market
  

Broan 356BK1600 CFM Roof Mount Powered Attic Ventilator, Black PVC Dome

Broan-NuTone

Based on 81 reviews Check latest price

Product description

Upgrade your home ventilation with Broan-NuTone's Roof Mount Powered Attic Ventilator. This ventilator keeps your attic cool and dry all day long at a maximum 1600 CFM for up to 2285 sq. ft. The 14” diameter steel blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The unit has a 23-gauge metal flashing that allows for nailing and hot tar application and mesh bird screen. The attic ventilator operates automatically and includes a built-in adjustable thermostat with a thermally protected lubricated motor. This ventilator measures 17" x 17" x 4" to provide year-round ventilation for your attic and mounts easily between rafters with the included installation template. Extend the life of your roof with Broan-NuTone's Roof Mount Powered Attic Ventilator! Broan-NuTone leads the industry with forward-thinking residential ventilation products, customized climate, communications and home automation solutions along with award winning customer service. Broan’s inspiring heritage provides the foundation for its three global brands – Broan, NuTone and BEST.

From the Manufacturer

Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.

  • HIGH-QUALITY VENTILATOR: Attic ventilator works to remove super-heated attic air in spaces up to 2285 sq. ft. at 1600 CFM
  • DURABLE HOUSING: PVC dome provides ultraviolet protection and 23-gauge metal flashing allows for nailing and hot tar application and mesh bird screen
  • EFFICIENT OPERATION: 14" diameter steel blade is specially designed for maximum air movement
  • EASY TO USE: Unit operates automatically with an adjustable, built-in thermostat for your convenience
  • IDEAL SIZE: Measures 17" x 17" x 4" to provide year-round ventilation for your attic and mounts easily between rafters with the included installation template

User questions & answers

Question: How much current does this fan draw
Answer: Yes
Question: What are the Watts, warranty, and roof hole size
Answer: no. this is a partial kit... i recently purchased, needing to rebuild my differentials primairly and anything else in between . only once i tore it all down did i realize there is only enough bearings for 1 differential. plus there are multiple extra tiny bearings that i have never seen on my slash or slash 4x4. my kit said slash 4x4 on it but i dont think it was the right one, if so, this kit is a partial.
Question: Can I out a rheostat to turn it to half power? It's pretty loud right now and realized my attic isn't that big, (1200 sf
Answer: No, it is specifically for the slash 4X, Stampede 4x4 and the Telluride 4x4. It is the bearing carrier for the main spur gear assembly. PJs RC
Question: Can you use a variable speed controller with this fan
Answer: Have had mine in since early May w/weekly runs on sandy/dirt track w/no problems, better than stock. my guess would be that you may have slipper clutch to tight? I snug mine down and back off 1 full turn. Also make sure your slipper plate is lined up correctly, it can be 1/4 turn off of the correct position and still "look" good, you should not be able to move it even during loose assembly.

Product features

Improving Lives with Improved Air.

Headquartered in Hartford, Wisconsin, Broan manufactures forward-thinking residential ventilation products, customized climate, communications and home automation solutions.

Broan offers a broad line of kitchen and bathroom ventilation products, providing choices, style, value, and a name that can be trusted.

iLIVING HYBRID Ready Smart Exhaust Solar Roof Attic Exhaust Fan, 14", Black

iLIVING

Based on 102 reviews Check latest price

Product description

The iLIVING ventilation exhaust fans are the no.1 selling fan. This smart solar Attic fan is your best choice for cooling off your home while helping you to save big on your cooling bills. Equipped with a powerful 20W adjustable polycrystalline solar panel, this fan is IP68 water proof. Built with a brushless motor, it provides up to 2000 sq. ft. of capacity cooling. Smart thermostat with wide range control of 65-130f and an enable/disable feature allows you to have more freedom to control the fan the way you want. This fan is ready for add on features like a non-stop running AC power supply, on/off switch, and a screen guard. Add-On features are sold separately. Fan comes with 15 year warranty. Designed and engineered by iLIVING in San Francisco, California.

  • Comes with smart thermostat control 65-130f with enable/disable feature
  • Ip68 water proof brushless motor, 15 year warranty
  • Adjustable solar panel (0°/15°/30°/45°), 20W, 1750Cfm, up to 2000 cool sq. ft. off capacity
  • 1 selling ventilation fan. Designed by iLIVING in san francisco, California
  • Non-stop Day/Night running AC/DC adapter kit is sold separately, model # ILG8SF304

User questions & answers

Question: Can this be mounted on a wall
Answer: Yes you can, apart from the sunlight angle
Question: Does it have a screen to keep insects out
Answer: We do not carry a screen at the moment
Question: How do I get a/c Add on
Answer: Please call us for the ac power kit
Question: How do I calculate the wattage of a solar attic fan
Answer: Watts are the result of multiplying the operating voltage times the draw max current. (W = E x I). Your operating voltage on an AC fan is 120 volts. The operating current is posted on the manufacturer's label on the fan. Multiply one by the other and you get your watts. On a DC system like solar or batteries the voltage is the max output produced and the current (I) is also on the label.

AIR VENT 53827 Roof Mounted Power Attic Ventilator, Brown

Based on 123 reviews Check latest price

Product description

Rv26brmt roof mounted power attic ventilator, brown, 25 inch diameter metal dome, 1170 cfm, ventilates up to 1650 soft, with adjustable thermostat from 60 to 120 degrees, 2.8 amp motor, 6 bladed Fan blade, 14-1/2 inch diameter opening, needs 562 spin net free intake area, 5 year limited parts warranty, 2 year limited labor warranty.

  • Item Weight: 17.5 lb
  • Country of Origin: China
  • Color: Brown
  • Brand name: Air Vent

User questions & answers

Question: Can this be used on 10/12 pitch roof
Answer: approximate dimensions 20x52 inner 24x56 outer
Question: Will this work for a 10 by 12 shed or overkill and find something smaller
Answer: yes you just shorten the step/ladder part to desired length
Question: What material is the dome made out of
Answer: Yes 2 pieces exactly for one ladder.
Question: Could you use this on new construction where your going to foam the roof 1 in thick
Answer: quick way is to go to hardware store and buy same gage wire and get the terminal lugs needed and make your own wiring using the old wires as a template

Broan 358 Roof Mount 120-Volt Powered Attic Ventilator, 1000 CFM

Broan-NuTone

Based on 57 reviews Check latest price

Product description

Upgrade your home with Broan-NuTone's Gable Mount Attic Ventilator! This aluminum ventilator keeps your attic cool and dry all day long at a maximum 1000 CFM for up to 1400 sq. ft. The 14” diameter steel blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The unit has a 23-gage metal flashing that allows for nailing and hot tar application and mesh bird screen. The attic ventilator operates automatically and includes a built-in adjustable thermostat with a thermally protected lubricated motor. Transform your home today with Broan-NuTone's Gable Mount Attic Ventilator!

  • HIGH-QUALITY VENTILATOR: Aluminum attic ventilator works to remove super-heated attic air in spaces up to 1000 sq. ft. at 1400 CFM
  • DURABLE: Housing constructed of 23-gage metal flashing that allows for nailing and hot tar application and mesh bird screen
  • EFFICIENT: 14" diameter steel blade is specially designed for maximum air movement
  • DURABLE: Thermally protected, permanently lubricated motor is built to last
  • EASY TO USE: Unit operates automatically with an adjustable, built-in thermostat for your convenience

User questions & answers

Question: Can this be used to vent a chimney for an outdoor grill kitchen
Answer: Many of the reviews complain of the same issue. I read the reviews, but didn't expect the noise level to be that annoying. I would never recommend this product.
Question: I already have an opening from an old attic fan. Its a square 14x14 inches. Will this opening work with this fan
Answer: The box Extends close from the fan unit. It was set at installation and I can't reach it without a ladder. I do have a separate on/off switch connected where I can get to just in case...
Question: what is the duct diameter it connects to
Answer: we have it set at 90 degrees, fan turns on when attic temperature reaches 90. Our Electrician set it.
Question: Does this seal (i.e open and close) so that you don't have air flow when it is not running
Answer: The 356BR specification sheet indicates that this unit has a built-in adjustable thermostat - for automatic operation at your chosen temperature level.

Product features

Broan 358 120V Attic Ventilator, Roof Mounted, Aluminum, 1000 CFM

In summer, attics can reach 150-Degrees Fahrenheit or more, warming living areas, increasing the air-conditioning load, and adding to energy bills. In winter, ice dams can result, and moist air can condense causing mildew, rotting wood and wet insulation. Year-round attic ventilation ensures a cooler, drier attic that can extend roof life by preventing rot, premature aging and shingle distortion. A cooler attic extends the life of an air conditioner and lowers air conditioning expense.

Roof Mount/Mounted Power Attic Ventilator (Black)

Based on 97 reviews Check latest price

Product description

Attic ventilation? We got this. Our roof mount powered attic ventilators are exactly what you've been looking for. Attic exhaust has never been easier. Our low profile dome—available in galvanized steel—has galvanized steel mesh grilles to protect against insects, birds, and rodents yet allow adequate air intake. Our fan blades are precision balanced for minimum vibration. Our motors are UL and CU/L listed for safety in handling. Ventamatic Power Roof Vents are factory assembled for easy installation (no special tools required) and are built for stability and high wind resistance.

  • Heavy Duty : No brittle plastic, baking and chipping in the sun - our unit is rugged galvanized steel. 6-point suspensions (anchor points) for stability and wind resistance.
  • Max Air : 1080 CFM (1600 sq. ft attic) from precision balanced 14" fan blades for minimum vibration and no heat distortion.
  • Energy Efficient : 2.6 amp draw with a heavy duty PSC thermally protected motor, that's engineered to run cool for long life and dependable service.
  • Worry Free : Assembled in Texas with a 2-year limited warranty. We stand behind our products and stand behind our customer.
  • Modern Design : Our low profile dome has galvanized steel mesh grilles to protect against insects, birds, and rodents yet allow adequate air intake.

User questions & answers

Question: What is included
Answer: Yes, you can raise or lower temp by putting your finger on the screen. You can also say "Alexa raise the temperature ".
Question: Can it be mounted upside-down
Answer: Yes it does. It takes the four wires that exist in your wall already and at the air handler, you install the 5 wire to four wire converter and can skip running the fifth “c” wire. It’s very easy. You will love it
Question: Is the a fabric cover that can be purchased that will fit over it during the winter? If so any recommendations
Answer: Nope
Question: How tall is it
Answer: The Ecobee 4 comes with mounting screws and screw anchors. I've installed three Ecobees in my home and have not needed a special bracket. It also comes with a suitable back plate to cover up any holes left by a bigger thermostat.

Product features

Maxx Air - The Brand You Can Trust Since 1948

A pioneer in the ventilation industry since 1948, Maxx Air manufactures high quality air delivery and air movement products for the residential, commercial, industrial, and agricultural markets. Based in Mineral Wells, Texas with a reputation for quality, our products stand the test of time.

From Home to Factory, We Do it Better.

20-Watt Solar Attic Fan (BDB) with Thermostat /Humidistat (23 x 23 x 8.75 IN) - Brushless Motor – Solar Vent Fan that’s Hail and Weather Resistant – “Builder Series” by Remington Solar

Based on 68 reviews Check latest price

Product description

COOL YOUR ATTIC AND HOME… SAVE ON ELECTRIC BILLS… EASE YOUR HVAC / FURNACE’S STRESS:

Attics can reach up to 140+ Degrees in the summer months; it’s no wonder you dread paying your energy bill during July… Remington Solar could EASILY lower your energy consumption!

This solar powered roof fan ventilates your attic utilizing FREE Solar Power, which cools your home AND takes the load off your HVAC/Furnace… Saving you THOUSANDS over time!

BUILT-IN HUMIDISTAT / THERMOSTAT: 

Whether its humid or a dry climate, this fan was made for your home! Its Humidistat and Thermostat allow it to automatically fight Moisture or Heat based on its readings!

BRUSHLESS MOTOR TO EXTEND THE FAN’S LIFE… TEXAS WINDSTORM CERTIFIED: 

No more brush replacements for your outdated attic fan… This Solar Roof Vent features a brushless motor, which turns the motor without wear or friction, extending the life of your fan! This fan is also Texas Windstorm Certified!

ADD-ON AVAILABLE TO AUTOMATICALLY SWITCH POWER SOURCE AND OPERATE AT NIGHT: 

Most solar fans “claim” to have a 110v inverter to run the fan at night… except YOU have to climb up and MANUALLY switch the fan!

Remington Solar’s 110v Hybrid Adapter (SOLD SEPARATELY) Automatically detects low power from your panel, while checking the temperature of your attic to determine if it should run on house power!

30-DAY SATISFACTION GUARANTEE AND 15-YEAR LIMITED WARRANTY

We’re so confident in this Solar Powered Fan for Attics, we’re giving you a 30-day RISK-FREE TRIAL, on top of a 15-year warranty! If you don’t like it, simply send it back and we’ll refund every cent!

** CAN VENTILATE 2000 SQ. FT.**

All parts included:

  • Solar Panel
  • Fan with Housing
  • Humidistat/Thermostat
  • Hinges
  • Mounting Screws

  • REDUCES YOUR ENERGY BILL… COOLS YOUR ATTIC & HOME… IMPROVES HVAC & FURNACE PERFORMANCE: Summer months bring higher energy bills, partly because of the limited airflow into your Attic! The “Builder Series” Cools attics & Automatically keeps your Home Cooler… taking the stress off your Furnace, HVAC & your Wallet!
  • POWERED BY FREE SOLAR ENERGY… FIGHTS MOLD & MOISTURE: Finding Mold & Moisture in your home can cause severe consequences to your home’s value and your family’s health. This solar exhaust fan is fueled by the Sun & Automatically Combats Mold & Moisture!
  • BUILT-IN HUMIDISTAT & THERMOSTAT… HYBRID ADAPTER TO RUN AT NIGHT (SOLD SEPERATELY): Heat & Moisture damage your attic & can create HUGE repair bills… Remington Solar’s fan includes a Humidistat & Thermostat to automatically change airflow based on your attic’s needs! In addition, it can also be fitted with our Hybrid Adapter (Sold Separately) to Run at Night!
  • LIFE-EXTENDING, BRUSHLESS MOTOR… LITTLE-TO-NO-NOISE… HAIL & WEATHER RESISTANT: This Brushless Motor creates no friction & turns your motor without wear, giving your solar roof fan a longer life! It’s also near-inaudible & comes with a Texas Windstorm Document!
  • DESIGNED FOR A LIFETIME OF USE… 100% SATISFACTION GUARANTEE: You have nothing to lose! Simply try our solar powered ventilation fan & if for any reason you aren't satisfied, we'll refund EVERY penny within 30-days! We also back the Fan with a limited 15-year Warranty!

User questions & answers

Question: What is the differance between builder series and larder squate models
Answer: The only difference is the shape on the 20 W fans. The larger fans in the builder series include a 110 V hybrid adapter which will allow the fan to run at night. Thank you for the question.
Question: Can this unit be installed on a flat roof
Answer: Yes, it can be, flushing can be secured on a flat or slanted roof
Question: Hi, the builder series is including the hybrid adapter
Answer: Not on the 20 watt. The adapter is included on the builder series for the 25 W, the 30 W, and the 40 W only.
Question: How much soffit area (air intake area) is required for this fan to perform to it's maximum capability
Answer: 4 ft.² of soffit for optimal performance

Broan-NuTone 356BR Attic Ventilator, Roof Mount Ventilator, Brown, 1600 CFM

Broan-NuTone

Based on 125 reviews Check latest price

Product description

Upgrade your home with Broan-NuTone's Attic Ventilator! This ventilator keeps your attic cool and dry all day long at a maximum 1600 CFM for up to 2285 sq. ft. The 14” diameter steel blade fan is pitched for maximum air flow and minimum sound level with the brown PVC plastic dome providing ultraviolet protection and superior durability. The 23-gage metal flashing allows for nailing and hot tar application. The attic ventilator operates automatically and includes a built-in adjustable thermostat with a thermally protected lubricated motor. This certified unit also includes a built-in screen to keep out insects, animals or birds without impeding airflow. Transform your home today with Broan-NuTone's Attic Ventilator!

From the Manufacturer

Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.

  • HIGH-QUALITY VENTILATOR: Attic ventilator works to remove super-heated attic air in spaces up to 2285 sq. ft. at 1600 CFM
  • DURABLE: PVC plastic dome with a brown finish provides ultraviolet protection and superior durability
  • EFFICIENT: 14" diameter steel blade is specially designed for maximum air movement
  • DURABLE: Thermally protected, permanently lubricated motor is built to last
  • EASY TO USE: Unit operates automatically with an adjustable, built-in thermostat for your convenience

User questions & answers

Question: Why is my fan so noisy
Answer: 120 VOLTS - 8 AMPS
Question: Is the included thermostat switch at the fan unit or something that can be installed remoted, for adjustments without climbing on a ladder to change
Answer: 960 watts, 1 year limited warranty, roof hole size is 14-3/8" diameter.
Question: What is the temperature range for the unit, aka what is the lowest temp at which the fan can turn on
Answer: I think you have one of two choices. Live with it, or install a smaller CFM unit. Personally, I'd learn to live with the noise. You could always add more insulation to the attic...
Question: Temperature control included
Answer: The 356BK is not designed to be used with a speed control. By using a speed control the motor will get very hot and will probably burn out prematurely.

Product features

Improving Lives with Improved Air.

Headquartered in Hartford, Wisconsin, Broan manufactures forward-thinking residential ventilation products, customized climate, communications and home automation solutions.

Broan offers a broad line of kitchen and bathroom ventilation products, providing choices, style, value, and a name that can be trusted.

QuietCool Smart Roof Mount Attic Fan (AFR SMT ES-2.0)

Based on 4 reviews Check latest price
  • Plug N Play (No Wiring)
  • 26 -170 Watts depending on the model
  • 1,015 – 2,116 CFM depending on the model

User questions & answers

Question: Can this be roof mounted
Answer: Ventilator with thermostat
Question: Does this have a wind rating? Is it safe for areas with hurricanes
Answer: I have run these upside down on the bench just to test them maybe only 10 to 15 minutes, but they didnt seem to have any issues, of course they would not be weather proof by any means and if the suction was from outdoors dirt and moisture would get pulled into the motor , not good with an open frame motor design. If your intention was to say, pull air from an upstairs room or attic down into a building I see no real issues
Question: Where is it made
Answer: I don’t think you need to cover it during the winter decades of the dome
Question: Does it come with backdraft dampers
Answer: 8" to 10". I did not have to go far down the roof line to hide it from the street in front. If, I get a chance, I will get up there and measure it, as I have something else to do up there.

Product features

Smart Roof Mount Attic Fan

The most power for the least consumption. Our Smart Roof Mount Attic fan can run on as low as 26 watts while producing 2,116 CFM of airflow. The Smart Roof Mount Attic Fan Comes with a Smart Control App that allows you to set presets, control your fan from anywhere in your house, and regulate your attic temperature.

Innovative Features for Unrivaled Performance

• Ultra-Energy Efficient ECM

• Roof Mount Cover

• Built-in Mounting Tabs

• Produces 2116 CFM

• As low as 26 Watts

• 3-speed motor

• Built in the USA

• Plug and Play

• Easy Installation

How Do Smart Roof Mount Attic Fans Work?

  1. Install your Smart Roof Mount Attic Fan and plug it in for instant cooling.
  2. The Smart Control App will allow you to turn your Attic Fan on whenever you need it.
  3. Wait 24 hours and your attic temperature will be cooled and maintained within 10 °F of ideal outside temperature.

OuietCool Smart App Control

  • Three-speed auto adjustment based on attic temperature
  • Included presets for all seasons and climate zones
  • See your current attic temperature and humidity level
  • Easy to use app control from anywhere in your home**

**Typical range is up to 100 ft. Range is subject to home size and construction

40-Watt Solar Attic Fan (BDB) with Thermostat/Humidistat/adapter (22.5 x 22.5 x 11 IN.) - Runs at Night - Brushless Motor – Solar Vent Hail and Weather Resistant – “Builder Series” by Remington Solar

Based on 84 reviews Check latest price

Product description

COOL YOUR ATTIC AND HOME… SAVE ON ELECTRIC BILLS… EASE YOUR HVAC / FURNACE’S STRESS: Attics can reach up to 140+ Degrees in the summer months; it’s no wonder you dread paying your energy bill during July… Remington Solar could EASILY lower your energy consumption!

This solar powered roof fan ventilates your attic utilizing FREE Solar Power, which cools your home AND takes the load off your HVAC/Furnace… Saving you THOUSANDS over time!

AUTOMATICALLY SWITCHES POWER SOURCE… OPERATES AT NIGHT: Most solar fans “claim” to have a 110v inverter to run the fan at night… except YOU have to climb up and MANUALLY switch the fan!

Remington Solar has solved that issue with the 110v Hybrid Adapter. It AUTOMATICALLY detects low power from your panel, while checking the temperature of your attic to determine if it should run on house power! A $129 value… included FREE!

BUILT-IN HUMIDISTAT/THERMOSTAT: Whether its humid or a dry climate, this fan was made for your home! Its Humidistat and Thermostat allow it to automatically fight Moisture or Heat based on its readings!

BRUSHLESS MOTOR TO EXTEND THE FAN’S LIFE… TEXAS WINDSTORM CERTIFIED: Say goodbye to brush replacements on your outdated attic fan… This Solar Roof Vent features a brushless motor, which turns the motor without wear or friction, extending the life of your fan! This fan is also Texas Windstorm Certified!

30-DAY SATISFACTION GUARANTEE AND 15-YEAR LIMITED WARRANTY: We’re so confident in this Solar Powered Fan for Attics, we’re giving you a 30-day RISK-FREE TRIAL, on top of a 15-year warranty! If you don’t like it, simply send it back and we’ll refund every cent!

** CAN VENTILATE 3400 SQ. FT.**

All parts included:

  • Solar Panel
  • Fan with Housing
  • Humidistat/Thermostat
  • Hinges
  • Mounting Screws
  • 110v Hybrid Adapter

  • REDUCES YOUR ENERGY BILL… COOLS YOUR ATTIC… IMPROVES HVAC & FURNACE PERFORMANCE: Summer months bring higher energy bills, partly because of the limited airflow into your Attic! The “Builder Series” Cools attics 24/7 & Automatically keeps your Home Cooler… taking the stress off your Furnace, HVAC & your Wallet!
  • POWERED BY FREE SOLAR ENERGY… FIGHTS MOLD & MOISTURE: Finding Mold & Moisture in your home can cause severe consequences to your home’s value and your family’s health. This solar exhaust fan is fueled by the Sun & Automatically Combats Mold & Moisture!
  • INCLUDES HYBRID ADAPTER TO AUTOMATICALLY RUN AT NIGHT… HUMIDISTAT & THERMOSTAT BUILT-IN: Heat & Moisture damage your attic & can create HUGE repair bills… Remington Solar’s roof fan includes an Adapter to Run at Night, as well as a Humidistat & Thermostat to automatically change airflow based on your attic’s needs!
  • LIFE-EXTENDING, BRUSHLESS MOTOR… LITTLE-TO-NO-NOISE… HAIL & WEATHER RESISTANT: This Brushless Motor creates no friction & turns your motor without wear, giving your solar roof fan a longer life! It’s also near-inaudible & comes with a Texas Windstorm Document!
  • DESIGNED FOR A LIFETIME OF USE… 100% SATISFACTION GUARANTEE: You have nothing to lose! Simply try our solar powered ventilation fan & if for any reason you aren't satisfied, we'll refund EVERY penny within 30-days! We also back it with 15 year warranty on the fan and 2 year warranty on the 110V adapter.

User questions & answers

Question: It is waterproof, strong winds and other weather conditions
Answer: Yes. It is an extremely durable fan
Question: I only want to use this as solar. Can I still use it without hooking up power
Answer: Absolutely!
Question: Where is this made
Answer: Thank you for the question. This is designed and engineered in America with some assembly in America. Currently some of the components are sourced from several different countries. First assembly is done at our factory in China.
Question: can the fan direction be reversed? My attic has no vents so I want to have one fan blow air into the attic while the other sucks it out
Answer: No, you cannot reverse the flow. However you may want to consider our gable fan to pull air in through a gable vent.

Broan-NuTone 345SOWW Surface Mount Solar-Powered Attic, Energy-Saving Ventilator, Weathered Wood, 28-Watts, 537 CFM, 3200

Broan-NuTone

Based on 70 reviews Check latest price

Product description

Upgrade your home with Broan-NuTone's Solar-Powered Attic Ventilator! This ventilator features a 28-watt solar panel that captures sunlight to efficiently convert it into electric power, keeping your attic cool and dry all day long at a maximum 537 CFM. The 12” diameter, one-piece aluminum 5-blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The low-profile, integrated design creates an attractive, unobtrusive addition to your roof without the need for props or pivoting stands. The housing, constructed of UV-stabilized ABS plastic, and rugged, tempered glass solar panel withstands large hail and won't delaminate or fade over time due to weather. Installation is quick and easy with the compact base footprint allowing for fewer shingles to be cut and housing frame including positive stops to "seat" the dome. This unit includes stainless steel fasteners and galvanized steel brackets for durability and corrosion resistance, and aluminum, heavy-gauge screen to keep out insects, animals or birds without impeding airflow. Optional thermostat is easy to install and disables the motor when the temperature dips below 50-degrees, to extend motor life; recommended for climates where cold weather condensation isn’t a concern. Save energy with Broan-NuTone's Solar-Powered Attic Ventilator. Because our solar cells are highly efficient at capturing the sun’s energy, there is no need for unsightly raised panels or tracking systems.

  • SOLAR-POWERED VENTILATOR: 28-Watt solar-powered attic ventilator converts sunlight into electric power, providing a maximum 537 CFM year-round
  • DURABLE: Housing constructed of UV-stabilized, color-dyed, rugged ABS plastic and rugged, tempered glass solar panel are built to withstand large hail and resist deteriorating over time
  • DURABLE: Housing constructed of UV-stabilized, color-dyed, rugged ABS plastic and rugged, tempered glass solar panel are built to withstand large hail and resist deteriorating over time
  • EASY INSTALLATION: Compact base footprint and housing frame with positive stops to "seat" the dome allow for a fast and easy installation - Recommended for use with a shingle roof only
  • ATTRACTIVE: Low profile, integrated design for an attractive, unobtrusive addition to your roof without the need for props or pivoting stands used by some manufacturers

User questions & answers

Question: so without the thermostat, does this fan run all the time while it is light out
Answer: Yes, it runs continuously when it receives light. You may purchase a Broan thermoswitch which will shut it off if the temp is less than 50 deg F (which means it'll basicaly run all the time). I purchased the thermoswitch for the Natural Light brand because it turns on at 80 and off at 70 (added benefit: it's cheaper). For my climate in Los Angeles, that range is preferable (I would think the same in other climates, too). To install, just clip off the black male spade connector of the Broan and replace it with a female and reconnect with the switch in series. The wiring that comes with the switch is not used. It's easy and it works!
Question: Can this fan sustain hurricane winds
Answer: Our unit is located on the Ocean and we have had storms but no hurricanes since it was installed.
Question: Can this be installed on a Terracotta tiled roof
Answer: Only if the tiles are relatively flat. Broan's website indicates the fan is designed for a "shingled" roof. Not much clearance between the base and the fan housing, but it woks great.
Question: Will these keep the dampness out of a shed? Shed is only 140 square feet
Answer: This fan is designed for spaces of 3200 cubic feet. We would not recommend using this fan in a small space. Please contact our Technical Support Department at 800-637-1453 for assistance in determining the best fan for your needs.

Product features

BROAN 345SOBK Surface Mount Solar Powered Attic Ventilator, 28-Watt

BROAN Solar Powered Attic Ventilators use energy from the sun to operate, and require no additional electricity.

The BROAN 345SO Attic Ventilator features a 28-watt solar panel that captures sunlight from dawn to dusk and efficiently converts it into electric power to keep attics cool and dry all day long. It provides 537-maximum-CFM and year round protection for the structure of a home.

The housing features a molded design of UV-stabilized, color-dyed, rugged ABS plastic that withstands hail and resists fading to remain attractive for years; it may also be painted to match roof color.

Low Profile:

Compact base footprint means fewer shingles to cut for easier, faster installation.

Low profile, integrated design for an attractive, unobtrusive addition to any roof without the need for props or pivoting stands.

Pest & Weather Resistant:

Aluminum, heavy-gauge screen keeps out insects, animals or birds without impeding airflow.

Rugged, tempered glass solar panel withstands large hail and won’t delaminate.

Built to Last:

Housing frame features positive stops to 'seat' the dome for fast, easy installation.

Includes stainless steel fasteners and galvanized steel brackets for durability and corrosion resistance.

Efficient:

12-Inch diameter, one-piece aluminum 5-blade fan is pitched for maximum airflow.

Direct-current motor is dynamically balanced for superior performance and silent operation.

Cool Attic CX1500 Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade

Cool Attic

Based on 1 reviews Check latest price

Product description

The Cool Attic standard-duty Attic Exhaust Ventilator offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic, help prevent weather-induced home deterioration, and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof. U.S.A. Fan Diameter in. 14, Air Delivery CFM 1,300, Needs to be Hardwired Yes, Speeds qty. 1, Volts 120, Amps 2.6, Dimensions L x H in. 15 x 15, Depth in. 7. Galvanized steel construction Suitable for 1850 sq. ft. attic Includes 10 Amp adjustable thermostat Requires minimum 600 sq. in. net free air intake vent area Easy installation behind static gable louvers sold separately

Keep your attic cool and ventilated with the power gable ventilator fan. It cools attics up to 1,850 square feet using a 14-inch fan with a 1300 CFM rating. The fan has an adjustable automatic thermostat and prolongs the life of composite roof shingles with lower summer attic temperatures.

From the Manufacturer

The Ventamatic CX1500 power gable ventilator fan is a 1,300 CFM power attic roof-mount ventilator with a 2.6-amp motor and steel flange. It has an adjustable automatic thermostat. It works best for attics up to 1,850 square feet. It prolongs the life of composite roof shingles with lower summer attic temperatures. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100 percent powered by wind generated power, 95 percent of all waste products are recycled, and the packaging is recycled cardboard.

  • Galvanized steel construction
  • Suitable for 1850 sq. ft. attic
  • Includes 10 Amp adjustable thermostat
  • Requires minimum 600 sq. in net free air intake vent area
  • Easy installation behind static gable louvers (sold separately)

User questions & answers

Question: do you have to oil it
Answer: Oiling the motor once or twice a year will extend the life of the motor. If the motor requires oiling, oil ports or openings will be located on both motor end plates. Use a SAE 20 non-detergent motor oil.
Question: Has anyone retrofitted one of these to a roof vent
Answer: I did one in a gable vent, it comes with nice instructions. I mounted it on a piece of plywood then mounted two 2x4s to the gable vent framing then mounted the plywood to the 2x4. It was easy, my 12 yr old son and I did it in 30 minutes. It was summer time in the attic so we wanted to do it fast. I bought a cheap extension and cut off one end and wired it to the leads then ran it to an outlet in the attic.
Question: How long is the thermostat wiring. How far will it reach away from the fan
Answer: Wiring on the fan thermostat is very short about 12" or so. I rewired it and moved the thermostat to a location about 25 feet away. This allows me to set the thermostat without having to crawl down the entire length of the attic.
Question: The 2500 cfm fan uses less power than the 1500 cfm? and haf of the 1600 cfm? Am I missing something here
Answer: I had to find this out myself straight from the manufacturer, https://bvc.com/skin/frontend/base/default/salessheets/gable_ss.pdf. CX2500 (1650 CFM) · 3 Amp Energy Efficient PSC Motor • ventilates a 2500 sq ft attic CX1600 (1600 CFM) · 4.5 Amp Motor • ventilates a 2400 sq ft attic CX1500 (1300 CFM) · 2.6 Amp Motor • ventilates a 1850 sq ft attic

Product features

Gable Mount Power Attic Ventilators

Ventamatic Standard Galvanized Gable Mount Attic Vent - 1300 CFM (cubic feet per minute) standard gable mount attic exhaust ventilator. Galvanized steel construction.

Suitable for 1850 sq ft (square foot) attic. 2.6A (ampere) thermally protected motor. Includes 10A adjustable thermostat. 14" fan blade. Engineered mounting system virtually eliminates vibration and ensures quiet operation.

Cool Attic CX1500UPS Power Gable Ventilator Fan

Precision balanced fan blades for minimum vibration and no heat distortion. 4 fan blades for greater air movement.

This fan requires minimum 600 sq in (square inch) net free area intake vent area. Completely pre-assembled for easy installation, no special tools required. Easy installation behind static gable louvers or model.

Broan-NuTone 345SOBK Surface Mount Solar-Powered Attic Ventilator, Energy-Saving Ventilator, Weathered Wood, 28-Watts, 537 CFM

Broan-NuTone

Based on 46 reviews Check latest price

Product description

Upgrade your home with Broan-NuTone's Solar-Powered Attic Ventilator! This ventilator features a 28-watt solar panel that captures sunlight to efficiently convert it into electric power, keeping your attic cool and dry all day long at a maximum 537 CFM. The 12” diameter, one-piece aluminum 5-blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The low-profile, integrated design creates an attractive, unobtrusive addition to your roof without the need for props or pivoting stands. The housing, constructed of UV-stabilized ABS plastic, and rugged, tempered glass solar panel withstands large hail and won't delaminate or fade over time due to weather. Installation is quick and easy with the compact base footprint allowing for fewer shingles to be cut and housing frame including positive stops to "seat" the dome. This unit includes stainless steel fasteners and galvanized steel brackets for durability and corrosion resistance, and aluminum, heavy-gauge screen to keep out insects, animals or birds without impeding airflow. Optional thermostat is easy to install and disables the motor when the temperature dips below 50-degrees, to extend motor life; recommended for climates where cold weather condensation isn’t a concern. Save energy with Broan-NuTone's Solar-Powered Attic Ventilator! Rugged, tempered glass solar panel withstands large hail and won’t delaminate so you can be confident in its reliability, functionality and attractive appearance

  • SOLAR-POWERED VENTILATOR: 28-Watt solar-powered attic ventilator converts sunlight into electric power, providing a maximum 537 CFM year-round
  • DURABLE: Housing constructed of UV-stabilized, color-dyed, rugged ABS plastic and rugged, tempered glass solar panel are built to withstand large hail and resist deteriorating over time
  • ENERGY SAVER: The 12” diameter, one-piece aluminum 5-blade fan is pitched to allow for maximum air flow, keeping your living area cooler, extend the life of your air conditioner and save energy and money
  • EASY INSTALLATION: Compact base footprint and housing frame with positive stops to "seat" the dome allow for a fast and easy installation
  • ATTRACTIVE: Low profile, integrated design for an attractive, unobtrusive addition to your roof without the need for props or pivoting stands used by some manufacturers

User questions & answers

Question: Is it thermostatically controlled
Answer: If you mean is it easy to see the positive & negative wires going directly into the fan, cut & splice your own switch in, bypassing thermostat.... yes it is easy to do.
Question: is the fan on the roof line or deeper
Answer: I think sealed, I don't remember any zerk fittings or oil holes to use. Mine has been in my house two years and there are no problems. I by passed the thermocouple and have it on a switch. I put one in my daughters house and used the thermocouple because she and her husband are gone quite a bit and not at home to turn it on. No issues after 18 months. Quiet because I used rubber padding between the fan and board it is connected to. It keep our upstairs a lot cooler. No issues with bearings yet, and I don't really expect any.
Question: Can this be install to an indoor patio? I have a room where the ceiling is essentially a shingled roof with no insulation or space inbetween
Answer: The thermostat is inside the fan--look at the picture, it is the little box in the lower left corner where the electrical wire is running into the fan. You can take the thermostat out as it is only attached with a couple of screws. Mounting it a few feet away from the fan is easily doable.
Question: I just installed this attic fan in my Florida which is in path of hurricane Irma. What should I expect
Answer: The fan is fairly quiet inside the house compared to others I have installed, however outside at the gable vent you can hear it very well, this fans moves a lot of air,

Product features

BROAN 345SOBK Surface Mount Solar Powered Attic Ventilator, 28-Watt

BROAN Solar Powered Attic Ventilators use energy from the sun to operate, and require no additional electricity.

The BROAN 345SO Attic Ventilator features a 28-watt solar panel that captures sunlight from dawn to dusk and efficiently converts it into electric power to keep attics cool and dry all day long. It provides 537-maximum-CFM and year round protection for the structure of a home.

The housing features a molded design of UV-stabilized, color-dyed, rugged ABS plastic that withstands hail and resists fading to remain attractive for years; it may also be painted to match roof color.

Low Profile:

Compact base footprint means fewer shingles to cut for easier, faster installation.

Low profile, integrated design for an attractive, unobtrusive addition to any roof without the need for props or pivoting stands.

Pest & Weather Resistant:

Aluminum, heavy-gauge screen keeps out insects, animals or birds without impeding airflow.

Rugged, tempered glass solar panel withstands large hail and won’t delaminate.

Built to Last:

Housing frame features positive stops to 'seat' the dome for fast, easy installation.

Includes stainless steel fasteners and galvanized steel brackets for durability and corrosion resistance.

Efficient:

12-Inch diameter, one-piece aluminum 5-blade fan is pitched for maximum airflow.

Direct-current motor is dynamically balanced for superior performance and silent operation.

Latest Reviews

View all