10 best sps garage door openers

Product description

Before purchase, please check your garage door opener

This aftermarket replacement remote ONLY works with Purple Learn Button LiftMaster / Chamberlain / Sears Craftsman / Raynor / AccessMaster brand garage door opener (hanging in your garage) made around 2005-2014 that features Security 315 MHz technology.

Or you can check if your remote control's model number is listed below

LiftMaster: 355LM, 365LM, 370LM, 371LM, 371LMC, 372LM, 372LMC, 373LM, 373LMC, 373P, 373W, 374LM, 374LMC, 376LM, 377LM, 377LMC, 378LM, 398LM and 41A6127-1

Chamberlain: 41A6318, 940D, 940CD, 950D, 950CD, 953D, 953CD, 956D, 956CD

Sears Craftsman: 139.18191, 139.18192, 139.53752, 139.53753, 139.53754

AccessMaster: 371AC, 373AC and 377LG

Do It: 940DID and 953DID

Raynor: 371RGD, 372RGD, 373RGD, 373PRGD and 377LG

AGAIN MAKE SURE your garage door remote is listed above or your opener has a purple learn button BECAUSE OTHERWISE IT WILL NOT WORK - THIS REMOTE IS NOT UNIVERSAL.

#

Feature Highlights

• Easy to program and use
• Sliding cover protection, no more accidental press in pocket or purse
• LED transmitting & low battery indicator
• Small & lightweight portable keychain style
• Latest RF technology ensures better range
• TRUE 4-button supports up to 4 different Security 315 MHz rolling code encryption devices
• Use one common CR2032 3V lithium coin battery each remote

LED indicator illuminates when transmitting, also it will flash during transmitting when battery is low.

Typical battery life is 2 years under average operating conditions when using Energizer, Sony, Duracell, Panasonic, Maxell or similar brands battery. Not applicable to factory pre-installed battery, which is provided for trial purpose only.

• IMPORTANT - Please make sure your garage door opener has PURPLE learn button, or this will not work (see all photos for clarification).
• Replacement for 370LM, 371LM, 372LM, 373LM, 374LM, 950D, 953D, 956D, 139.18191, 139.18192, 139.53752, 139.53753, 139.53754 etc (see description for full list)
• TRUE 4-button aftermarket remote clicker compatible with up to 4 different 315 MHz LiftMaster, Chamberlain, Sears Craftsman, Raynor and AccessMaster garage door openers (hanging in your garage) made around 2005-2014 that has a PURPLE learn button on the motor unit.
• Sliding cover protection, no more accidental press in pocket or purse. Built-in LED transmitting & low battery indicator. Latest RF technology ensures better range. Secure rolling code encryption.
• Small, compact and lightweight keyfob style easy to carry around. Easy to follow programming instructions and CR2032 battery included.

User questions & answers

Question:	Is there an option to buy 1 visor and 1 keychain type
Answer:	Yes, it is.
Question:	Is 891lm also work
Answer:	I used it to patch up a water reservoir in an outdoor water feature and so far it is still water tight so I would say that it is holding up very well under some pretty harsh conditions
Question:	When can I return if they don’t work
Answer:	You can paint over the epoxy and you can epoxy over paint, although you should be sure the paint is adhered to the painted surface. It would probably be best to sand the paint down to a bare surface.
Question:	Will this work on chamberlain 41ac050-1m? i do not see it listed in the description
Answer:	I use it in combination with wood,to carve bowls,using Blue Dye and some short round wood pieces,a form made from the bottom of a 5 gal pail,pour in the resin,let it set,then carve it.
Question:	Will it work for toliets
Answer:	depends on how thick you want it. Figure out the square inches and multiply by how thick you want it. Then google volume conversion. You will find a calculator that you can put your cubic inches into to convert to gallons. 3 gallons will cover roughly 19 square feet if you want 0.25 inch thick
Question:	Can the dap all purpose acrylic latex caulk + silicone product be used around ceramic or granite to seal a sink
Answer:	Our product will work great for your project. It is UV Resistant and Non-Yellowing. I would recommend multiple pours at 1/2 inch thickness.
Question:	if i sandwich a 1/2" bead between 26ga sheet metal and flat side of a PT 2x4 and leave in the Florida Sun
Answer:	I have in the past brushed on liquid epoxies such as this one to actually fill and repair cracked outdoor wood. The brush of course will be trashed so better use a cheap one.
Question:	Is this the best product for sealing/waterproofing an exterior sliding glass door jams leading from a bedroom to a patio
Answer:	Not really no.

Product description

MYQ Smart Garage Hub by Chamberlain allows you to use your smartphone to open and close your garage door from anywhere. Feel more secure at home when you set times for your garage to close and receive alerts when the garage door opens and closes. With the myQ garage, your smartphone, Wi Fi and any compatible garage door opener, you are connected and in control. myQ is compatible with most brands of garage door openers made after 1993, including Chamberlain, Craftsman, Lift Master, Stanley, and more. Note: You must have a sectional garage door and safety sensors installed. myQ is easily installed in four steps or you have the option to request expert garage hub installation for added support. myQ also works with Google Assistant for voice control, IFTTT, and Wink for even more features and functionality. Daily schedules preset times for your garage door to close or your lights to turn on/off every day. Enhanced security and protection with so many connected devices protecting your data is more important than ever.

• New free in-garage delivery with key by amazon available in select areas (check eligibility at amazon.com/keypromo). Prime members can opt in with the myQ smart garage hub to get Amazon packages securely delivered right inside their garage, simply link your myQ account in the Key app
• Smart garage control open and close your garage door from anywhere with your smartphone through the myQ App
• Universal – Easy-to-add functionality to upgrade your existing garage door opener. Works with all major brands of garage door openers made after 1993 that have standard safety sensors
• Requirements needed to start - a router with 2.4 gigahertz Wi-Fi frequency, router with 802.11 B/G/N, a router within 50 feet of the myQ Smart Garage Hub (more details in PDF user manual)
• Simple setup: Wireless installation with easy step by step instructions provided in the myQ App means you’ll be able to enjoy smart garage control in minutes
• Guest access: Securely invite up to three people to control your garage with the myQ guest feature (Note: Not intended for guests under the age of 13)
• Smart collaboration: Linking your myQ account to Google Assistant and IFTTT is free for a limited time. No credit card required
• Core features: Opening, closing, and receiving garage door status notifications are included with myQ App at no additional charge

User questions & answers

Question:	Will my existing door openers (car, wall, and outside keypad) still work
Answer:	Yes, all of your existing openers will still work. What this does is allows you to see if your garage door is open or closed no matter where you are (at work, on vacation, anywhere where your phone can connect to the internet), and it allows you to open or close it from anywhere from the app. You can also set alerts so that you get notified when somebody leaves it open and you can schedule it to close at specific times. So it is MUCH more than just a remote control in your car or on your sun visor.
Question:	Is it compatible with amazon alexa/echo, apple homekit
Answer:	Follow below links to enable Alexa with MyQ. Works well for me. Note : you will have to download simple commands app from app store. Setup : https://simplecommands.zendesk.com/hc/en-us/articles/360005574293-Getting-Started-with-the-kloee-for-SC-Smart-Home-Skill https://simplecommands.zendesk.com/hc/en-us/articles/360020793153-How-to-control-your-garage-doors-through-Alexa-with-SimpleCommands Customize command : https://simplecommands.zendesk.com/hc/en-us/articles/360021126733
Question:	Will this integrate with a Samsung Smart Things hub
Answer:	It is really shame that Chamberlain myQ decided to NOT support SmartThings. After their announcement to support it (which was if I remember 2015 or 2016), I actually switched all of the garage openers to be myQ compatible... which ended in major disappointment because they never got out the integration. There was a manual integration that a SmartThings user did, but even this one is now defunct.
Question:	Why does chamberlain charge a fee when the other devices are free
Answer:	This is a shame and Chamberlain should be embarrassed. It's pathetic. I would rather pay $10-20 more to never pay a subscription fee as long as I own the device. Aonthly or annual fee is just sickening and it's the singular reason why I have not purchased this product. Everything I own is Chamberlain. By including a fee, they have completely ALIENATED A LOYAL CUSTOMER. Am I also understanding this correctly that Alexa does not have a subscription fee for integration?

Product features

WINK

Come home to a brightly lit home and have your lights turn on when you open your garage door.

Key by Amazon

Prime members in select areas can opt-in for secure in-garage delivery for all their packages.

Google Assistant

Ask Google if your garage is open, then tell Google to close it.

IFTTT

Connect myQ to hundreds of your favorite apps and devices to create completely custom schedules.

Product description

The Genie 1-Button Remote has Intellicode and an auto-seek dual frequency of 390MHz and 315MHz. It is compatible with all Genie openers produced since 1995. This remote can be used as a key-chain remote or clipped to your cars visor.

• COMPATIBLE WITH GENIE INTELLICODE GARAGE DOOR OPENERS: Designed to work with all Genie Intellicode garage door openers manufactured since 1995.
• SIMPLE PROGRAMMING: Easy to program, includes detailed illustrated programming instructions for easy setup.
• SIMPLE STORAGE & SLEEK COMPACT DESIGN: Includes a visor clip, but is small enough to fit on a key chain if so desired.
• AUTO-SEEK DUAL FREQUENCY TECHNOLOGY: Accesses strong, secure signals to minimize interference and improve overall performance

User questions & answers

Question:	I need am extra remote. i have genie model gict-390. is this compatible
Answer:	There isn’t a door exactly but you can see the wood in the picture acts as a door of sorts. There is a rope pull to get the ladder down. I plan to add a little molding to finish it off but that is not necessary.
Question:	Just curious to know if anyone having range problems has changed the battery. This problem usually indicates low battery power
Answer:	The steps are 14" long, but are mounted inside side-rails. so the effective "usable" width of a step is only 12".
Question:	Does this come with instructions for programming
Answer:	The manufacturer's description says, "This ladder fits ceiling heights from 7-Feet 8 in to 10-Feet 3-Inch".
Question:	Does it replace model #ACSCTG type
Answer:	Actually, the one we bought was 24 3/4 inches not quite 25.

Product features

The Genie Company

Genie is one of America's best known and trusted consumer brand names in the garage door opener industry. The company has an illustrious history that underscores its commitment to innovation. Millions of our products are in use today throughout North America. Dependability, high quality and nationwide service are just a few reasons to choose Genie branded garage door openers.

Product description

"Genie’s Wireless Keypad is a system for easy access to your garage without the need for a key. It features a flip up cover to protect the keypad from the elements and lets you control up to three Genie Intellicode garage door openers manufactured since 1995. The keypad features a back light which means you can easily see to enter your code even at night.

With auto seek dual frequency technology (315MHz/390MHz), the wireless keypad helps to ensure the opener will respond regardless of possible nearby frequency interference, and it can operate Genie garage door openers that work on either single or dual frequency technology. The Intellicode technology the keypad is equipped with keeps your property protected by automatically changing the access code every time you use it, thereby preventing access from unauthorized persons.

The Genie wireless keypad is a great way to allow temporary access to your garage by setting a temporary PIN that can be provided to repair persons, meter readers, house sitters, etc., while you’re away, without compromising your family’s private entry code. Refer to your user’s manual for setting a temporary PIN.

The Genie GK-R Intellicode Wireless Keypad is made with Genie Genuine Accessories & Parts for guaranteed performance. The Wireless keypad comes with 2 (AAA) batteries, mounting screws and instructions for easy installation. Make garage entry easier with a Genie wireless keypad for your opener."

• KEYLESS GARAGE ACCESS: Enter your garage without needing to carry a key with the Genie wireless keyless entry pad.
• SAFE AND SECURE: Intellicode technology prevents access to your garage by unauthorized persons.
• COMPATIBLE WITH ALL GENIE INTELLICODE OPENERS: Works with Genie single or dual frequency openers manufactured since 1995.
• AUTO SEEK DUAL FREQUENCY: Ensures the opener will respond regardless of possible nearby frequency interference.
• EASY INSTALLATION AND USE: Mounts with screws (included) and features a back-lit keypad and flip cover.
• Replaces older model Genie Intellicode Keypads: GWKP, GWK-IC, ACSDG, ACSDA1, ACSD1G, B8QACSDA, B8QACSDA1

User questions & answers

Question:	Is there another brand i can replace this one with? even with new batteries, i have to put the code in 5-10 times. i hate it
Answer:	I am very sorry to hear this. The keypad may need to be reprogrammed after battery replacement. Please contact us at 1-800-354-3643 so we can walk you through this and assist you further.
Question:	do you have to open up the garage door opener to install this
Answer:	You have to get to the garage door opener, put it in learn mode, and open the door to make it work.
Question:	is this compatible with sears garage door opener
Answer:	An intriguing question. It's likely that it could work. Here's why: automotive, built-in remotes work with a wide variety of door openers, so there's obviously a standard.
Question:	is this suitable for mounting outdoors, like on the garage door frame
Answer:	Yes, I mounted mine on the outside, on the garage door frame, and have had no problems with it. I'm not sure what the manufacturer recommendations are on outside mounting but the unit would not be useful if not outside and easily accessible. I thought about keeping it out of any direct sun but I'm not sure how important that factor is. It mounts flush and when in the closed position is very snug.

• Be Smart: Make your existing garage door smart. Remote and Voice Control, just tapping the meross /'mɪrɚs/ app from anywhere or speaking to your Alexa, Google Assistant or SmartThings devices. To let in your family, guests or couriers through the garage door while you are cooking or not at home. No monthly fee or any other subscription fee! Please scroll down and check in the "Technical Specification - User Guide" to see the latest voice control usage.
• Compatibility Check: Please scroll down and check in the "Technical Specification - Application Guide" whether your garage door model is in the compatibility list. Also you can check if your garage door model is in the compatibility list on meross /'mɪrɚs/ official web.
• Multiple Notification Modes: Stay alert by different notification modes such as garage door open/ close status, overtime notification and overnight notification to remind you close the garage door. And you can check the garage door open/ close operation records through the APP.
• Stable and Precise: Meross smart garage opener works with Mediatek IoT chipset that supply Chipest for Amazon Echo smart speaker. Powerful chipest make it capable of longer WiFi connection range and lower disconnection rate than most of its competitors. And it comes with a high sensitivity sensor which monitors the status of garage door more accurate and the signal stays stable.
• Easy to Install: Installation is much easier than you may think. Pls make sure your wifi strength is acceptable near your garage door. This is the upgraded version, which has solved the interference issues our old verion may cause to some garage door remotes.

Product features

Voice Control and Voice Skill

Open & Close the door: "Alexa, lock my garage." "Alexa, unlock my garage."

"Hey Google, open my garage." Can I have your security code? One two x x ."

"Hey Google, close my garage."

Check the door status:

"Alexa, is my garage locked?" "Hey Google, is my garage opened/closed?"

Compatibility Check

1. Scroll down the page to find the Application Guide in the Technical Specification section, try to find your garage door opener model in the compatibility list.

2. Or you can simply use pliers to short the wall button terminals of the opener. If the garage door opens or closes, it works with MSG100.

3. If both above ways fail, please tell us your garage door opener’s brand and model, we can check it for you timely.

Remote Control

Control or monitor your garage door from anywhere anytime.

The Existing Wall Button and Existing Remote Control can still work, after you installed the meross garage door opener.

Keep House Safe

Get alerts when your garage door opens, closes, opens for a long time or is forgotten to be closed at bedtime.

IFTTT

If Nest thermostat detects there is no people in the home, then close my garage door for safety.

Reliable Connection

Powered by Mediatek IoT chipset, Meross smart garage door opener can provide reliable connection in garage where the home WiFi may not be well covered.

Triggers

When your garage door opens or closes. Let the Meross smart bulbs flash to notify you.

One App for Your Home

Control all your smart plug, surge protector, single pole/3 way/dimmer wall switch, bulbs, humidifier, smart garage door opener and many other smart devices with one Meross app.

Product description

The Chamberlain Original Clicker Universal Garage Door Opener Remote keeps you moving with two buttons that control up to two different brands of garage door openers individually. This easy to program remote is compatible with over 90 percent of all garage door openers installed in North America, including major brands such as Chamberlain, LiftMaster, Craftsman, Genie and many more. Whether replacing, updating, adding or consolidating remotes, this remote is the one that you know will work.



Rigorous quality testing ensures secure encryption to prevent hacking and extreme 800 ft. range for immediate access. It can also control gate operators and MyQ Light Accessories for an all in one solution.



Includes visor clip, long life 3V coin cell lithium CR2032 battery and instruction manual.

• Features two buttons to control up to two garage doors or gates. The chamberlain universal remote can even operate up to two different brands of garage door Openers
• Programming is easy. The chamberlain universal remote programs wirelessly to the garage door opener and does not require you to cut into wiring or install an unsightly receiver in your garage
• The Clicker is compatible with Genie, Linear, Stanley, Overhead Door, Wayne-Dalton, Craftsman, Chamberlain, LiftMaster, and more, Security +2.0 Compatible
• The chamberlain universal remote features long battery life, and withstands rigorous quality testing
• Visor clip, battery, and instruction manual are included

User questions & answers

Question:	Will this work with a Wayne Dalton 303mhz transmitter with rolling codes
Answer:	I'm afraid ours is not a direct replacement to the models you mentioned.
Question:	Will this work with Chamberlain CG
Answer:	The 41A5021-1M-315 is a 315MHz Security+ receiver logic board, which means it should be work. Thanks.
Question:	Will this work with the Challenger Garage door opener
Answer:	The range should be similar as your geniune ones.
Question:	Will this work with a Chamberlain model
Answer:	My opener has a red learn button so the remote must be compatible to a red learn button. This particular remote needs an opener with a purple learn button-make sure that’s what you have on your opener!

Product features

Clicker Universal 2-Button Garage Door Opener Remote

The Chamberlain Universal Remote works with all major brands of garage door openers. The remote control can be programmed to activate up to two products, such as a garage door opener, gate operator or commercial door operator. Easily programs wirelessly to the garage door opener and does not require you to cut into wiring or install an unsightly receiver in your garage.

Easy to Program & Compatible With Most Major Brands

The KLIK3U Clicker features clear and simple instructions for programming your remote to match the settings on your old one. Simply remove the front panel and push the Smart/Learn program button. Depending on your old remote control, you will use either the Smart/Learn program button in your system or match the dip switches to the settings on the old remote. A programming instructional video is available on our official.

The KLIK3U Clicker is designed to be used with garage door systems that feature photo-eye safety sensors which are compliant with current federal safety regulations.

The Clicker is compatible with Genie, Linear, Stanley, Overhead Door, Wayne-Dalton, Craftsman, Chamberlain, LiftMaster, and more.

More Information:

Chamberlain KLIK3U Clicker Universal Remote Control, one coin cell battery, visor clip and instructions.

Operates Two Doors for Added Convenience

The KLIK3U Clicker has two buttons and can be used with two different garage door manufacturers or frequencies. You can also program one or both of the buttons for use with Chamberlain gate operators. With one convenient remote for two operations, you can streamline your garage door operating system.

About Chamberlain

Chamberlain is one of the cornerstone companies of Duchossois Industries, Inc., a privately-owned, diversified, multinational company that carries the strength, respect, and financial stability of a billion-dollar-plus corporation.

Chamberlain is one of the world's largest manufacturer of residential and commercial door operators, access control products, and gate operators.

• Be Smart: Make your existing garage door smart. Remote and Voice Control, just tapping the meross /'mɪrɚs/ app from anywhere or speaking to your Alexa, Google Assistant or SmartThings devices. To let in your family, guests or couriers through the garage door while you are cooking or not at home. No monthly fee or any other subscription fee! Please scroll down and check in the "Technical Specification - User Guide" to see the latest voice control usage.
• Compatibility Check: Please scroll down and check in the "Technical Specification - Application Guide" whether your garage door model is in the compatibility list. Or check the compatibility list on meross /'mɪrɚs/ official web. If "pilers short test" fails, but your garage opener is from Chamberlain/LiftMaster/Craftman. please send us the learn button color of your garage opener, we can ship the proper accessory for you along with the MSG100, make it works.
• Multiple Notification Modes: Stay alert by different notification modes such as garage door open/ close status, overtime notification and overnight notification to remind you close the garage door. And you can check the garage door open/ close operation records through the APP.
• More Precise and Stable: It comes with a high sensitivity sensor which monitors the status of garage door more accurate and the signal stays stable. With adapter convert 110v to 5v, much safer.
• Easy to Install: Installation is much easier than you may think. Pls make sure your wifi strength is acceptable near your garage door. This is the upgraded version, which has solved the interference issues our old verion may cause to some garage door remotes. If you still find it interference with your original garage door remotes, please contact support@meross for help. We have a solution for you.

User questions & answers

Question:	Do I need to use the magnetic switch to show door open/ closed or can I use without it
Answer:	It has Z-Wave OTA update capability, but the update would be performed / controlled by the Z-Wave controller. The GD00Z-8 itself has no internet capabilities.
Question:	Will the app manage two openers at the same time? And will voice control work like - "Alexa, open door 1 or door
Answer:	Yes, but you will likely want to remove the old sensor (but not the base plate) and replace it with the new one to avoid having to re-pair the sensor with the unit.
Question:	Will this work with a nice sliding gate opener
Answer:	Yes, I have 3 GoControl devices working with my SmartThings controller.
Question:	What's the difference between the two models b07qctn71j vs b07l5dpk8p . all i can tell is 5v vs 10v
Answer:	You have to have a z-wave hub to pair this device to. I am using Hubitat but there are others. You then use whatever app your z-wave hub uses.

Product features

Voice Control and Voice Skill

Open & Close the door: "Alexa, lock my garage." "Alexa, unlock my garage."

"Hey Google, open my garage." Can I have your security code? One two x x ."

"Hey Google, close my garage."

Check the door status:

"Alexa, is my garage locked?" "Hey Google, is my garage opened/closed?"

Compatibility Check

1. Scroll down the page to find the "Application Guide" in the Technical Specification section, try to find your garage door opener model in the compatibility list. Or you can simply use pliers to short the wall button terminals of the opener. If the garage door opens or closes, it works with MSG100.

2. If both above ways fail, but your garage opener is from Chamberlain/LiftMaster/Craftman. Please send us the learn button color of your garage opener, we can ship the proper accessory for you along with the MSG100, make it works.

Remote Control

Control or monitor your garage door from anywhere anytime.

The Existing Wall Button and Existing Remote Control can still work, after you installed the meross garage door opener.

Keep House Safe

Get alerts when your garage door opens, closes, opens for a long time or is forgotten to be closed at bedtime.

IFTTT

If Nest thermostat detects there is no people in the home, then close my garage door for safety.

Reliable Connection

Powered by Mediatek IoT chipset, Meross smart garage door opener can provide reliable connection in garage where the home WiFi may not be well covered.

Triggers

When your garage door opens or closes. Let the Meross smart bulbs flash to notify you.

One App for Your Home

Control all your smart plug, surge protector, single pole/3 way/dimmer wall switch, bulbs, humidifier, smart garage door opener and many other smart devices with one Meross app.

• COMPTIBILITY: It is compatible with most major garage door opener in the market. Scroll down and check your model compatibility in the "Technical Specification - Installation Manual". NO MONTHLY FEE or HIDDEN FEES.
• REMOTELY CONTROL: Open, close, check door status, receive just within your eHomeLife iOS/android App. Works with Google Assistant, Alexa.
• ALERTS: Stay alert by different notification modes, which remind you close the garage door (overtime and overnight notifications) or keep you update with the door status.
• EASY INSTALLATION: Just much easier than you think, all you need to do is following the user manual or app guide.

User questions & answers

Question:	Can more than one cell be used with this opener? Can i install the app on my cell and my wife on her cell? So i can use it and she can on her cell as
Answer:	This is a controller, to open & close. There is a sensor to indicate if the door is open or close. To avoid close if a pet/person is under the door requires a different sensor, usually part of the main door unit.
Question:	One of the product pictures mentions that samsung smartthings and auto close will be available in nov (2019). will there be a new version in nov
Answer:	The opening time is the delay between when you tell it to open and the app shows it is completely open. The overtime alarm is it's warning to remind you that the door has been left open for over a certain amount of time.
Question:	Will this work with a wayne dalton ClassicDrive
Answer:	I just use my Wi-Fi you don’t need google or anything just the Wi-Fi
Question:	Can the wall mount switch and wireless remote be connected and used at the same time
Answer:	Yes, you can control the garage door via 2 smartphone using the same account in the same app.

Product features

Voice Control

Works with Google Home, Google Assistant, Amazon Alexa.

Safety Alerts

Support multiple modes of notification, keep your house in safe at the first time.

Remote Control

Control or monitor your garage door from anywhere anytime.

Good compatibility

Compatible with over 200 brands and 1500 models

History record

Review all the open/close records, check the abnormal actions with trace.

Easy Installation

Just much easier than you think, all you need to do is following the user manual or app guide.

• It is compatible with most popular brands includes Liftmaster, Chamberlain, Stanley, Moore o matic, Linear, Genie with multiple frequency 300/310/315/368/390 MHz etc.
• Our 2 channel remote control is able to replace 2 different major brand in one. You do not need to carry more remotes for your multiple doors and gates.
• Amazing replacement remote control for green button, purple button, yellow button,red button,orange button garage door opener and as well as garage door opener with dip switch. Please kindly be noted the red/orange button might not applicable.
• Package includes visor clip and long life lithium battery as well as user manual.
• Please read carefully the compatible list. Easy to program by following the manual supplied in the box. For any questions or concerns, please contact us through our store front page " Ask a question" with your order ID, we will be the first time to reply.

User questions & answers

Question:	Incredibly confusing instructions. i have a code switch (not learn button) 300mhz 10-dip switch remote. how do i program it
Answer:	The "anchors" are swirled metal. If you have a sandy yard they will not work without a concrete footing. I have both surface sand and the clay. We bent the anchors and had to use concrete. As far as worth buying it is perfectly fine with small children but not older. My 3 year old granddaughter fits perfect on the seat now but I don't see her fitting it safely in a few years.
Question:	How to program a 3-dip switch system to a 2-dip switch remote
Answer:	COVERAGE: Coverage can depend on any number of factors, most notably coating thickness, porosity of the surface and waste, but a 1-gallon kit (1⁄2 gallon resin and 1⁄2 gallon hardener) should cover about 12 square feet in 1/8” thick coat, or 24 square feet at 1/16” thick. One thin seal coat followed by one flood coat is typical for application on bare wood. One ounce of mixed material should cover about 54 square inches in a 1/32” thick application.
Question:	Can I sync my remote with my gate code remote? If so, how can you provide details
Answer:	Yes, works well
Question:	left button does not program. right button will open both doors??? how do i program the left button to open the other door? is the opener defective
Answer:	This epoxy brand, left everything sticky and for that reason. It's costing me way more then that epoxy did, too replace everything. I wouldn't recommend this brand of epoxy to anyone. If you contact company, they push you off to someone else then someone else and you're still out the cost for this product and everything you lost using it. Oh other thing it leaves lots of bubbles, no matter how many times. You take the proper step to remove bubbles and not self leveling. I've dealing with epoxy for years now and have done crazy awesome things with it but this epoxy... very disappointed and unsatisfied with customer service.

Product features

Ezyopenteck Universal 2-Button Garage Door Opener Remote

COMPATIBILITY:

It is compatible with most popular brands including Liftmaster, Chamberlain, Genie, Stanley, Moore o matic, Linear, and wide frequency from 300MHz-390MHz. Using our own security technology and has undergone a lot of testing.

MODELS:

Chamerlain/Liftmaster openers: 1345, 1355, 1356, 3220, 3240, 3265, 3270, 3280, 3800, 3500, 3850, 3585, 3595, 950CD, 953D 139.53753.

Craftsman: HBW2028.

Liftmaster remote model: 370LM, 371LM, 372LM, 373LM, 374LM, 375UT, 971LM, 973LM, 893MAX.

Chamberlain remote model: KLIK1U.

Compatible With Most Major Brands

Visor clip included for easy access

Easy to Program

Product description

GarageMate opens your garage using your Androids, iPhones, and Apple Watch. GarageMate installs in minutes with only two wires to connect to your garage door opener and will not interfere with your existing remotes or wall console.

You can then pair up to 8 Androids, iPhones, and Apple Watch. Never needs batteries!

GarageMate uses Bluetooth4.0 and initial pairing requires you to be inside your garage and to hold the receiver's pairing button for several seconds. This offers the highest level of security. GarageMate does not use Wifi and does not connect to the Internet, which is good for cost, security, and ease of setup, but it also means you can not control your garage when you are not home or check if your door is opened or closed.

With thousands of installations world wide , GarageMate has a proven track record of compatibility, security, reliability and customer support. We support Genie, Liftmaster, Chamberlain, Sears Craftsman, Wayne-Dalton, Sommer, Martin... and ALL garage door openers built in the last 50 years that use a simple wall switch.*

*Note some, but not all, newer (made after 2011) Chamblerlain/Liftmasters/Sears-Craftsman/Overhead Door and and a few Genies in 2012 and 2013 (serial number starts with 11, 12, or 13) have a "smart" wall switch and are not compatible. Fortunately Genie fixed this compatibility problem in 2014 but the problem remains with some, but not all, newer Chamberlain/Liftmasters. For more information visit our website, https://bluemate.com, or message us through Amazon.

The GarageMate team has performed extensive fail-safe testing under extreme temperatures, high humidity, power loss problems.

Backed by a 1 year warranty and expected to last for many many years.

We hope you order!

https://play.google.com/store/apps/details?id=com.bluemate.garagemate

https://itunes.apple.com/us/app/garagemate/id885169011

Designed, final assembly, tested, and packaged in the USA.

• Bluetooth 4.0 for easiest setup and compatible with nearly all garage door openers. Note, if your Craftsman, Chamberlain, or Liftmaster was made after 2011, check if it has a yellow learn-button. If the button is yellow then it will NOT work with GarageMate. But if it is any other color (e.g., red, blue, purple, green, orange, black, gray, etc.) then it will work fine with GarageMate. See product images and description below for additional compatibility details.
• Use Siri or OK Google to voice launch our App and automatically open the door. The Activity Log lets you monitor who opened your garage for added security. Securely pair up to 8 phones. Never needs batteries. App is always free and will never have subscription fees.. Note, if you have more than one garage you will need one GarageMate receiver for each garage but the same App can control all garages.
• Uses Bluetooth4.0 (not Wifi and not Internet connected) for excellent range and security. This eliminates Internet security risks and makes setup easy, but it also means GarageMate can not control your garage when you a home and you can not check if your garage is opened or closed. Many of our customers use a low cost webcam with motion sensor alerts as a camera is the most reliable way to check the status of your garage door.
• Works even in extreme temperatures from -40 degrees F to 140 degrees F. Uses 3 cents (yes pennies) of electricity per year and has the highest energy efficiency rating (CEC Level 6).

User questions & answers

Question:	how do I use OK Google to open my garage door
Answer:	Hi Dave. Just enable the "Auto-click when App starts" feature and then say "OK Google, launch GarageMate". That has been sufficient for most of our users, but admittedly isn't as helpful if you have multiple garages. Thanks for writing, LP. GarageMate Support
Question:	do I need anything else to hook this up and get it operational
Answer:	Only if need be , mine sits nicely on my genie , handy device !!!
Question:	Is the iPhone app compatible with CarPlay
Answer:	Hello Richard. For safety reasons, Apple is restrictive as to what Apps can work with car play and for security reasons I don't believe you can pair anything other than your iPhone to Apple CarPlay. So at the moment the App is not available for CarPlay. We'll ask our contacts at Apple for more information. Remember, you can open your garage by saying "Siri, Launch GarageMate". This assumes you enabled the "Auto-open when App starts" feature in the GarageMate App. I hope this helped.
Question:	How do I know if GarageMate is compatible with my garage door opener
Answer:	GarageMate achieves the highest level of compatibility even with the most uncommon garage door openers. The exceptions noted below. We are new to Amazon, but we have thousands of previous customers around the world so we have a lot of data and many years of proven reliability. The GarageMate receiver works by "simulating" a standard push button wall switch. So if you have wall button that open and closes your garage, then GarageMate is compatible. We are even compatible with older Class 2 openers built over 30 years ago. Unfortunately, some but not all, newer LiftMasters/Chamberlains/Craftsman built after 2012 may no longer support aftermarket accessories. All Liftmaster/Chamberlains built in 2012 or later have the "date of manufacture" printed on the unit so it is easy to tell. Send us an e-mail if you have any doubt. [email protected] in the year 2012 and 2013, some but not all, Genie's had a manufacturing variance that may prevent compatibility. Genie fixed the problem in 2014. You can tell the manufacture year by the first two numbers of the serial number, (i.e., 12 and 13 means manufactured in 2012 or 2013 respectively).Finally, GarageMate is meant for residential use where the same button opens and closes the door. If you have a separate red-colored emergency STOP button then your opener is commercial grade and not compatible with GarageMate.