12 best linear garage door openers

Product description

The mct-3 3-channel visor transmitter is a wireless radio control Designed for use with automatic garage and gate operators. Each of the three transmitter buttons will send a unique code When pressed.The visor clip can mount on the side or the top of this unit for ease of use. One button can be used to activate the individual's garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most Linear 318 MHz megacode wireless receivers.To conserve battery life, An internal timer limits the transmission Duration to 10 seconds if the transmitter button is held down.

• 3 button remote
• Visor clip, battery and instructions included
• Compatible with 318MHz Megacode receivers only
• Not a universal remote
• Compatible with Linear LDO50, Lso50, Ldco800 & Lco75 operators

User questions & answers

Question:	I have a "Delta 800" garage door. It says it has "smart learn technology". Can you tell me if this opened will work
Answer:	I have a PDS 800 and it works great .
Question:	I have single linear remotes with 8 switches. Will this remote be able to work to cut down on remotes that i have
Answer:	This will not work for your system. You need a learn button for this remote to work
Question:	do the instructions say anything about being compatible with genie, elite and chamberlin? i have 2 garage doors and one gate
Answer:	No.They are not compatible.
Question:	is this a universal remote or only for linear brand? i am seeing mixed answers
Answer:	You can trust my answer because I used to work for Linear. This will work on all Linear garage door openers such as the LDO units and the LSO units. It will also work with the Mega-Code receivers that they make. Such as the MDR/U and the MDR. Hope this answers your question. I have been in the radio control industry since 1968 when I started to work for Linear.

Product description

This digital keypad is a MegaCode series of wireless radio controls designed for use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled security with more than a million different codes. In operation, the user enters their unique code on the unit’s keypad (1 to 6 digits long) and presses the button to activate the door operator. For up to 30 seconds after the last activation, the keypad can be re-triggered by simply pressing the button again. This allows the user to stop or reverse the opener quickly, without having to re-enter their code. The keypad has built-in keypad lighting for use at night or in dark areas. The clear silicone keys are backlit with a soft blue glow. Press the light button at any time to activate the keypad backlight. To turn the overhead operator light on or off, enter the user code, then press the light button. The keypad lockout timer will disable the keypad after 10 activations. The keypad must remain idle for 30 seconds before new attempts. MegaCode receivers are programmed by sending a signal from the user’s transmitters. This stores the transmitter’s code into the receiver’s memory. The receiver will retain its memory even without power and will only activate from these “memorized” transmitters. Each keypad code can be considered a different transmitter. Each MegaCode receiver can remember a maximum of 10 transmitter codes. Any combination of portable transmitters and keypad codes up to the maximum number can be entered.

• MDTK Was Replaced By This Keypad
• Activates multiple MegaCode receivers
• Backlit keys for easy viewing
• RF Frequency: 318 MHz
• Programming is easy via the keypad; MegaCode receiver auto-learns PIN

User questions & answers

Question:	Is this unit compatible with the linear lra gate opener? i have a linear mdkp keypad that i need to replace
Answer:	Linear remote keypads works with all current models of the opener. The only problem I had was with limited distance, about 75 to 100 feet as I wanted to mount this keypad on the house; I ended up putting on the garage entrance door. Works fine there.
Question:	does the flip top cover the numbers on the keypad to shield it from the weather, it appears to be too short
Answer:	It completely covers the numbers and is a superior product to my original remote
Question:	When you have to replace the batteries in the keypad, do you have to re-program the the keypad? I had another brand in the past that required this
Answer:	No you do not. I just replaced mine.
Question:	Has anyone tried spray painting this remote
Answer:	I haven’t but I need to. Watch out for buttons. They’ll stick and drain battery.

Product description

2 Garage Door Remote for Linear Megacode MCT-3 DNT00089 (3 Button)

Replacement aftermarket remote

• Compatible with Linear LDO33, LDO50, LSO50, LDCO800 & LCO75 Operators
• for all Mega Code systems
• Easy to follow programming instructions
• Visor clip included
• Replacement aftermarket remote

User questions & answers

Question:	Does this work with the Linear LD
Answer:	I have one that doesn't work. The one in my other car works. . need replacement
Question:	How many MHz is this
Answer:	318
Question:	When I program the 2nd remote, the first one stops working. How to I get both remotes programmed to same door
Answer:	I never did get both mine to work honestly I gave up! Sorry that is no help
Question:	I have a LD033 with two remotes, one not working well. Can one replace only one with this item
Answer:	I wouldn't use this item at all. I ordered two of them and they worked like the car Christine in the movie. The garage door would open sporadically or only open halfway. The two I got were unpredictable and unreliable so I sent them back. I was going to smash them and bury them in the yard but I was afraid they would come back and haunt me....

Product description

1 Brand New Unit Linear Garage Openr Deluxe Wall Control Panel HAE00001 Deluxe Wall Station Linear Part Number HAE00001. Compatible with all Linear LSO, LDO and LCO residential operators Open/close door feature. Lockout feature. Control work Light Length: 4 1/2" Width: 2 13/16" Depth: 7/8" Included Parts. Mounting Screws Included.

• 1 Brand New Unit Linear Garage Openr Deluxe Wall Control Panel HAE00001 Deluxe Wall Station
• Linear Part Number HAE00001. Compatible with all Linear LSO, LDO and LCO residential operators
• Open/close door feature. Lockout feature. Control work Light
• Length: 4 1/2" Width: 2 13/16" Depth: 7/8"
• Included Parts. Mounting Screws Included.

User questions & answers

Question:	How many wires used? 2 or
Answer:	Two
Question:	is this a hardwired or wireless option
Answer:	It’s the wired replacement for opening in the garage not wireless. Easy to install only two wires to connect.
Question:	how does lock-out feature function
Answer:	I had to go test it. But on my Linear opener moving the lock switch down disables the remote only. The open/close on the panel still works.
Question:	Does it work with genie
Answer:	I don’t know. My garage door is a Linear. This wall opener was the exact one I replaced.

Product description

Linear Mega Code MCT 11, dnt00090 Linear MCT-11 single button remote, 318 mhz, visor style (same as mct1 only smaller) The MCT-1, MCT-11 and MCT-2 MegaCode digital transmitters are wireless radio controls designed for use with automatic garage/gate operators. The MegaCode radio format provides unparalleled security. The format provides more than a million different codes. Features Activates one MegaCode receiver Test/operate LED Visor mounting clip supplied Power: 2) 03-10a20 3volt batteries Frequency: 318 MHz Codes: 1,000,000+ (factory precoded) Dimensions: 2.16 x .95 x 3.75 inches

• Linear Mega Code MCT 11, dnt00090
• Linear MCT-11 single button remote
• Dimensions: 2.16 x .95 x 3.75 inches
• 318 mhz

User questions & answers

Question:	I dont have a rotating code on the back of mine, will this work with mine? What is the setup process
Answer:	Easy set up. Press the sync button on the garage door motor and then the remote button. They quickly link and worked fine for me.
Question:	MD 1207, will it work, that number is on my present remote
Answer:	MD1207 is a date code. This is a mega-code remote. If you have a Linear Garage Door operator it will work great. Any other brands it will not work.
Question:	Does it work along with other existing remotes. Ie. I am buying this to for my kids car and i have 2 remotes from manufacturer currently
Answer:	Yes, I have several remotes because I had three cars that have their own garage opener and my son has one for when he get out school so yes it works just fine.
Question:	Will this work to open a single code gate
Answer:	Yes it will , providing that you have a proper Linear Mega-Code receiver within the gate

Product description

Open and close your garage door via remote control with the Linear Megacode Wireless Garage Door Opener Digital Keypad. This wireless keypad connects to multiple Linear Megacode garage door openers and sends open/close signals when valid passcodes are entered. The Keypad accepts 1 to 6 digit PIN codes, providing over a million different code combinations. After inputting a keypad code, press the Up/Down button to open or close a garage door connected to a Linear Megacode Receiver. You can also activate the keypad's backlight by pressing the light button, illuminating the keypad for 30 seconds. Mount the Digital Keypad onto a Wall within range of your Linear Megacode garage door receiver. To program a passcode, press the Learn button for 1 second and then release. Enter a 1 to 6 digit code, then press and hold the Up/Down button until the keypad beeps. Contents: Keypad, Mounting Screws, Screw Anchors. NOTE: Requires compatible Linear Megacode receivers to set up and program (sold separately). Manufacturer Number: LPWKP-G. Specifications: Power: Three AAA batteries. RF Frequency: 318 MHz. Dimensions: 2.5 W x 5.6 H x 1.1 inches D. Warranty: One Year Limited.

• Wireless garage door keypad connects to multiple Megacode receivers
• Allows entry with 1 to 6 digit passcodes
• Allows multiple commands up to 30 seconds after code is inputted
• Lockout Timer activates after 10 incorrect attempts
• Backlit keys for easy viewing

User questions & answers

Question:	Is it water resistant for rain
Answer:	So far so good..and we've been getting a yon of rsin in Fl.
Question:	can this keypad be programmed to open two different doors, using separate codes
Answer:	No, it can only program to one motor per keypad.
Question:	Sometimes it opens but most times I can see the garage opener light blinking inside but the door does not open. What could be wrong
Answer:	Odd, I do not have this issue with mine. Have you tried taking it off and being inside your garage to ensure it works? I did that with mine before I mounted to make sure it would work. Also, how far away is this from your receiver? Mine is about 10-15 feet (give or take) from the garage receiver. I also mounted mine on the 'inside' part of the garage frame and not the brick to have a better line of site.
Question:	I installed the keypad and it seems to work but the keys tend to stick down. Does anyone else have this problem or know how to fix this
Answer:	No - do not have that problem, it works nicely.

Product description

One-button, one-channel, 9-volt battery powered visor transmitter with removable visor clip, 256 selectable codes.

• Activates one Delta-3 receiver
• Test/operate LED
• Visor mounting clip supplied
• Power: 9-volt battery supplied
• RF frequency: 310 MHz

User questions & answers

Question:	is it Delta
Answer:	You need to press the program button on your gate/garage opener and then at the same time press one of the remote buttons.
Question:	Hello, i want to buy an extra remote but mine is model dtd, the one that you are selling is linear dt linear delta remote dnt00002a dtc dt will work
Answer:	No!
Question:	Is this a 8 or 10 code
Answer:	It can be used only with eagle operators that have the eg650 receiver. If you like to use it on the garage door as well you will need to buy an additional receiver eg650 as long as your garage door has a connection. Can’t be used with new LiftMaster garage doors
Question:	Is this a 8 or 10 code
Answer:	Yes it has a key chain

Product description

The Linear PRO Access digital transmitter is a wireless radio control designed for use with automatic garage and gate operators. Each of the transmitter buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator. Linear PRO Access transmitters and receivers do not contain a typical “coding switch”. Each transmitter is permanently coded at the factory. The receiver is programmed by “learning” a transmitter’s unique digital code. The receiver will activate only from the “memorized” transmitters. The transmitter is powered by a Type CR2032 “coin-cell” battery. They should last at least 1 year with normal use. The indicator light on the transmitter will glow when the unit is activated. If the indicator lights dimly, or not at all when transmitting, the battery needs to be replaced. To conserve battery life, an internal timer limits the transmission duration to 20 seconds if a transmitter button is held down.

• 3 Button Remote Control
• Activates three MegaCode receivers
• Visor mounting clip supplied Bullet Point
• Visor clip mounts vertical or horizontal

User questions & answers

Question:	Will this work with a Ramset gate opener? and if so, how would one go about programing them
Answer:	I do not know the answer to that question. Go to the company’s website. You should be able to find your answer there.
Question:	Does this work with Linear LD050 opener
Answer:	I have been using it with my LD050 for the past 5 months with no problem.
Question:	I had two remotes and lost one if I buy this new one will both remotes work with my opener
Answer:	Yes but you will need to program it to the opener.
Question:	How do i program this
Answer:	On the side of the motor is a switch. Flip the switch to pair. A light will begin blinking. Hold the remote box a few inches away from the motor. Press and hold the open button on the remote for a few seconds until the light stops flashing. Turn the motor switch back to on. Your remote is now paired and should open and close the door.

Product description

1-Channel Visor Transmitter

• Linear MCT-11 1 button remote
• Red indicator on the face of the transmitter
• Each transmitter is permanently coded at the factory.
• MCT-11 includes: battery, and programming instructions.

User questions & answers

Question:	Do you need a multi channel receiver to use two of these
Answer:	No you don't. The receiver , if it's a stand alone should be able to handle quite a few of these.
Question:	My new remote can only open the garage door but cannot close it. Why would that happen and how to solve the problem? Thanks
Answer:	Haven't heard of this one. If it opens it should close. Try reprogamming
Question:	Will this remote work on all Linear Garage door opening systems? Mine is a Linear model L
Answer:	will this work on sears craftmans door openers
Question:	I need to order 2, will I be charged 2 shipping fees
Answer:	it would depend on who you buy from. With us it is based on weight with a set base price and then per pound increments so shipping two would be the same cost as one because they would be less than one pound together.

Product description

Linear Garage Door Openers Wall Station, for Linear garage door openers models LD033, LD050, andLS050.

• Wall station for Linear garage door openers
• For Linear garage door openers models LD033, LD050, and LS050

User questions & answers

Question:	Does this work with Wayne dalton openers
Answer:	I understand that it is not about the brand, but the Hz of the signal. It all depends on the color of the learn button, assuming your talking about openers made within the last 20 years. Before that they had dip switches. Figure out how many GHz or MHz or what-ever your opener is, then seek a remote with the same. 427Troy
Question:	Does it compatible with Genie garage door opener
Answer:	I don't believe so. I bought it specifically for my Linear garage door opener.
Question:	Do they run on battery or power line
Answer:	The power comes from the garage door opener. A pair of wires is run from the garage door opener to the wall station.
Question:	Does the wall station come with the wires that connect to the opener
Answer:	Mine didn't. You have to connect the wires from your wall to the opener. It's really simple to do, just connect and screw in and you are good to go. I've had no issues since installing mine.

Product description

Z-Wave Garage Door Opener Remote Controller

• Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device
• Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products
• Garage door position sensor frequency: 345 MHz ; Certifications FCC ETL UL 325
• This product requires the use and pre-installation of a Z wave HUB.
• Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door
• Easy to install and use
• Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device

User questions & answers

Question:	Will this work with LiftMaster Security - 3280M-267 1/2HP and controller: Homeseer Hometroller Zee
Answer:	That model of Liftmaster is not on the list of models that do NOT work with the GD00Z, so it should yes. Here is a link to the incompatible product list so you can double check, yours is not on it. http://www.linearcorp.com/info/Linear-GD00Z-Product-Compatibility-Notice.pdf.It does work with Homeseer, yes. Just make sure to have the very latest update for your homeseer, they just finished completing the testing with it on 10/5. Also check that you pair both the main unit AND the tilt sensor, as it seems it is undocumented in that regard in the instruction manual and on the HS website.
Question:	If I have two garage door openers right next to each other, do I need 2 of these devices
Answer:	Unless you want them both opening and closing simultaneously yes
Question:	Does this come with the tilt sensor
Answer:	Yes The tilt sensor is included.
Question:	Does this work with smartthings
Answer:	Yes! It worked flawlessly, I just installed it this past weekend (oct 25, 2014) Was worried I was going to need to install some lab version, but it showed up as a garage door opener, it reports open/closed, it can be activated as the app. I haven't set any special rules for it as I am still new to SmartThings, but based on its behaviors so far, it's rock solid. Also the device was pretty easy to install. The unit comes as 2 parts, a tilt sensor, and a box (thats in the photo) that mounts up near the opener itself. The tilt sensor runs on batteries, the unit needs to be plugged in, so that could be a problem if you dont have an available power outlet near the garage door opener. It also does not interrupt or affect the normal open close action of your buttons or remotes.

Product features

GoControl Garage Door Opener Remote Controller (Z-Wave)

The GoControl Garage Door Opener Remote Controller (Z-Wave) pairs with your existing automatic garage door opener to provide remote opening and closing control via your Z-Wave network and controller. When installed, you can open and close your garage door from anywhere. The garage door controller's audible and visual warnings will alert those nearby of the door's impending movement. The included tilt sensor attaches to the door to report its open or closed status to the Z-Wave controller. The Remote Controller also works as a repeater for your Z-Wave network, extending it up to an additional 130 feet (via line of sight).

What’s in the Box:

Remote Control of Your Sectional Garage Door

As a part of your Z-Wave network, the GoControl Garage Door Opener Remote Controller (Z-Wave) provides remote opening and closing of a sectional garage door by pairing with almost any automatic garage door opener. Once installed and paired with the door's existing opener, the Remote Controller provides both audible and visual warnings before opening or closing the door, meeting UL 325-2010 safety requirements.

Tilt Sensor Reports Door Position to Z-Wave Controller

The Remote Controller system's wireless tilt sensor attaches to the inside of the garage door. Once installed, it reports the door's open or closed status to the Z-Wave controller, which is then displayed on most Z-Wave controller apps.

Compatibility

The Garage Door Opener Remote Controller is never to be installed or used in conjunction with garage door openers manufactured prior to 1993 (models without an operational safety beam entrapment detection system).

Works as a Repeater for Your Z-Wave Network

For the Remote Controller device to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater. However, this device also works as a repeater, extending your network up to an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

Compatible with All Other Z-Wave-Certified Products

Like all Z-Wave-certified products, the GoControl Garage Door Opener Remote Controller (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, thermostats, light bulbs and lighting retrofit kits and plug-in modules as well as security devices, including alert sounders, passive infrared motion detectors, and door/window sensors.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

2 Pack of Linear MCT-11: 1-Channel Visor Transmitter

User questions & answers

Question:	Will this remote work on linear model ldo
Answer:	Yes, they will work fine on the Linear LDO050
Question:	can one fit on a key chair and one on visor
Answer:	These are both Visor transmitters. If you want a remote for a key chain then order a ACT-31B
Question:	how many dip switches does it have
Answer:	None that I can tell. Just have to hit the learn button on the receiver then the one on the transmitter. Super simple to program. Easy directions.
Question:	will this work with the dx model dxr-701 receiver
Answer:	NO not at all. Different frequency and different format. I think Linear has discontinued the DX equipment but you will need the DXT-21 freq. 303.875