10 best lizard skins baseball bats

Product description

DSP durasoft polymer bat wrap. Incredibly comfortable textured grip. Ultra lightweight. Slip resistant, wet or dry. Reduced vibration. Optimized feel and control. Pre-cut for easy installation. Can be cleaned with water or isopropyl alcohol and soft towel. Wrapping instructions included.

• 1.1mm in thickness
• Ultra lightweight
• Slip resistant, wet or dry

User questions & answers

Question:	Can i use this directly over the rubber taper under my bats original grip tape? i like how my bat is thicker toward the knob on my demarini voodoo bat
Answer:	I can't think of any reason why you couldn't put it right over the top of the old grip since each end is taped in place (tape pieces included). However, we removed the old grip before applying the lizard skin on our bat.
Question:	What’s it like to remove this grip tape? Is it hard to remove to go back to original? Is it sticky and gooey and annoying, or does it just peel off
Answer:	It's not difficult to remove this tape at all. It just peels off.
Question:	will it hold up to chainsaw grip use? Gas, oil and work
Answer:	I own a logging company and we use this on all of our saws. Takes two rolls to wrap sthil MS661Cm
Question:	how long should I buy it for a size 32 inch bat
Answer:	They are all the same length. Any Lizard Skin will fully grip any adult size bat. I usually cut off some excess grip tape because they give you a little more than you need. The measurements (.5mm, 1.1mm, and 1.8mm) measure the thickness/cushion of the grip. If you prefer a very thin grip or you're wrapping a wood bat, I would use the .5 thickness. If you like a very thick grip with more cushion, I would use the 1.8. 1.1 is the middle ground between the two thicknesses- some cushion, but not too bulky.

• Lizard Skins Bat Tapers are easy to install & stay in place with the double sided adhesive that is included
• Reduces Stress on Palm & Fingers - Improves and Maintains Control of Bat
• Install Taper Under Bat Grip -Designed for all Metal, Composite & Alloy Bats
• Standard Version Taper offers a modest taper that covers the full width of the bottom hand - Works for Baseball & Softball
• Flared Version Taper offers a more aggressive taper that imitates the feel of a wood bat and covers the full width of the bottom hand - Works for Baseball & Softball

User questions & answers

Question:	Can you use it in a wood bat
Answer:	U can put it over a mako grip but I would get 1.1mm or less especially. I got 1.8mm for xl3 bat and u notice its a little big on top of original grip I got 1.1mm for mako bat nice feel to itIf u plan to take off the original grip make sure bat is not under warranty any more you get a year warranty with it in case it breaks they could deny to replace it if the grip is different it says in warranty form that comes with bat
Question:	Can you use the flare grip on a bat with no flare
Answer:	Hi, 1.8mm is the thickest bat grip that we make.
Question:	Can you use these in high school baseball
Answer:	1.8mm It's the thickest they offer. My son says it really takes the sting out.
Question:	Is it hard plastic or silicone
Answer:	The most popular grip is the 1.1mm but is somewhat subjective. Some hitters do not like to change the feel of a thin handled bat and go with the .5, and then there are those that are looking for more vibration resistance and utilize the 1.8. Most seem to stick in the middle with the 1.1!
Question:	Can it be put on over a bat grip on a Mako bat or does it need to be took off before adding this bat grip
Answer:	I’m not sure it should say if so (left hand throw )
Question:	is there such as thing as 3.0 mm bat tape
Answer:	Different manufacturer may size differently. To be honest, sizing of glove and knowing how they do it has been a mystery to myself and ALL of my Sales Reps. I don't have any other really good answer for you. Not sure how old your daughter is but if she is 11-12 years old I would go right to a 12-12 1/2 glove.
Question:	What is the width
Answer:	I believe it’s the distance from fingertip to end of palm. My 8yr old uses an 11.25
Question:	how thick for a wood bat
Answer:	You will need to select "Right" under Orientation. That is for right hand throw (glove will fit on left hand). Thank you for your question!

Product features

Flared & Standard Bat Tapers

Our Standard Version Taper offers a modest taper that covers the full width of the bottom hand. Our Flared Version Taper offers a more aggressive taper that imitates the feel of a wood bat and covers the full width of the bottom hand

Easy To Install

The Lizard Skins Bat Tapers are easy to install & stay in place with the double sided adhesive that is included.

Comfort

Our New Bat Tapers reduces stress on the palm and fingers. Our Tapers also improve and help maintain the control of your bat.

Works For Baseball & Softball Bats

Our Bat Tapers are designed for all Metal Bats, Composite Bats & Alloy Bats for Baseball and Softball.

Finally, a bat taper that is easy to install. Available in Standard or Flared.

Our New Bat Tapers are easy to install & stay in place with the double-sided adhesive that is included.

Finally, a bat taper that is easy to install. Available in Standard or Flared.

Our New Bat Tapers are easy to install & stay in place with the double-sided adhesive that is included.

Finally, a bat taper that is easy to install. Available in Standard or Flared.

Our New Bat Tapers are easy to install & stay in place with the double-sided adhesive that is included.

Finally, a bat taper that is easy to install. Available in Standard or Flared.

Our New Bat Tapers are easy to install & stay in place with the double-sided adhesive that is included.

Product description

Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing. More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from. 1.1 Millimeter -Great all-around grip -Balanced cushion with thickness -Highest versatility -Great for transitioning from composite to wood -990 mm (39 inches) in length with pre-cut ends -Full adhesive back -Designed to fit wood, composite or aluminum bats -Finishing tape is included

• -Top grip chose by pros
• -Ideal on wood bats
• -No added thickness to the handle
• -More direct feedback from the bat
• -990 mm (39 inches) in length with pre-cut ends

Product description

Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing. More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from. 1.1 Millimeter -Great all-around grip -Balanced cushion with thickness -Highest versatility -Great for transitioning from composite to wood -990 mm (39 inches) in length with pre-cut ends -Full adhesive back -Designed to fit wood, composite or aluminum bats -Finishing tape is included

• -Top grip chose by pros
• -Ideal on wood bats
• -No added thickness to the handle
• -More direct feedback from the bat
• -990 mm (39 inches) in length with pre-cut ends

Product description

Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing. More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from. For 25 years, Lizard Skins’ mission has been to enhance the athlete’s performance, comfort and style. Our core expertise is the hand-to-grip interface. The key element of that formula is Durasoft Polymer, the first grip to offer enhanced performance and personalization in both feel and fashion. DSP is now everywhere baseball is found, from university to youth programs across the country and in all 30 Major League dugouts. Choose a Thickness Our expertise in grips helps us foresee the players wanted different options to customize the feel and thickness of their bat handle. Unfortunately, bat manufacturers and aftermarket grips had never specified the grip size. As a result, Lizard Skins created the thickness category. DSP bat grip was originally released in two different thicknesses – 1.8 mm to match the average industry size and 1.1 mm to provide a new, thinner option. After further testing, a key group of MLB players requested an even thinner grip that would provide all the same gripping properties but not increase the handle thickness. The 0.5 mm thickness was created to meet the high-performance demands of the world’s most competitive athletes. All three thicknesses continue to be popular today for different preferences and skill levels.

• 1.1 Millimeter Great all-around grip Balanced cushion with thickness Highest versatility
• Great for transitioning from composite to wood 990 mm (39 inches) in length with pre-cut ends Full adhesive back Designed to fit wood, composite or aluminum bats Finishing tape is included
• Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing.
• More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from.
• For 25 years, Lizard Skins’ mission has been to enhance the athlete’s performance, comfort and style. Our core expertise is the hand-to-grip interface. The key element of that formula is Durasoft Polymer, the first grip to offer enhanced performance and personalization in both feel and fashion. DSP is now everywhere baseball is found, from university to youth programs across the country and in all 30 Major League dugouts.

Product description

Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing. More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from. 1.1 Millimeter -Great all-around grip -Balanced cushion with thickness -Highest versatility -Great for transitioning from composite to wood -990 mm (39 inches) in length with pre-cut ends -Full adhesive back -Designed to fit wood, composite or aluminum bats -Finishing tape is included

• -Industry standard thickness on stock bats
• -Highest vibration dampening effect
• -Comfort for experienced players
• -Full adhesive back
• -990 mm (39 inches) in length with pre-cut ends

User questions & answers

Question:	Can I use this tape in a hockey stick
Answer:	Yes they're regular replacement bat grips, almost identical to what any metal bat comes with brand new.
Question:	Is this enough for two bats
Answer:	It’s plastic. I use the .5 lizard skin bat tape over it .

• Crush Proof Glove Case that protects & shapes your glove - Adjustable Ball Fixture Fits Any Glove
• Crush Proof Case for Sunglasses & Lenses - Two Compression Bat Sleeves
• Vented Pocket for Cleats & Shoes - Carabiner for Hanging
• Strap to Carry Helmet – Loops through ear wholes of any helmet
• Blank Patch that can be used for Customization – 3.25in x 3.25in - Bag Dimensions: 21” L x 14” W x 11” H

Product features

Lizard Skins Ultimate Baseball Bat Pack Players Equipment Backpack

The Lizard Skins Ultimate Bat Pack is constructed with the highest quality materials making it a premier backpack for Baseball and Softball players. Our equipment bat pack holds two bats and easily attaches and holds a helmet using an earhole strap. We made it even better, protect your glove and sunglasses with built-in case and dedicated compartments to make sure your glove and sunglasses are crush-proof.

The Ultimate Bat Pack For The Elite Players

• Crush proof glove case to protect glove shape
• Adjustable ball that fits the pocket height of any glove
• Removable front piece that can be customized
• Bat sleeves to securely hold two bats

The Ultimate Bat Pack For The Elite Players

• Ear hole helmet strap
• J-Hook for hanging
• Vented cleat/shoe compartment
• Durable 600D polyester material

The Ultimate Bat Pack For The Elite Players

• Crush proof glove case to protect glove shape
• Adjustable ball that fits the pocket height of any glove
• Removable front piece that can be customized
• Bat sleeves to securely hold two bats

The Ultimate Bat Pack For The Elite Players

• Ear hole helmet strap
• J-Hook for hanging
• Vented cleat/shoe compartment
• Durable 600D polyester material

The Best Baseball & Softball Equipment Backpack Available..

• Crushproof glove case to protect glove shape
• An adjustable ball that fits the pocket height of any glove
• A removable front piece that can be customized
• Bat sleeves to securely hold two bats
• Earhole helmet strap
• J-Hook for hanging
• Vented cleat/shoe compartment
• Durable 600D polyester material

Product description

Our 1.8 mm thickness Durasoft Polymer Bat Grip is made to match the industry-standard thickness of stock bats. It has the highest vibration dampening effect, great for building confidence in youth and for added comfort for experienced players. -Industry standard thickness on stock bats -Highest vibration dampening effect -Confidence builder for youth -Comfort for experienced players -990 mm (39 inches) in length with pre-cut ends -Full adhesive back -Designed to fit wood, composite or aluminum bats -Finishing tape is included

• -Industry standard thickness on stock bats
• -Highest vibration dampening effect
• -990 mm (39 inches) in length with pre-cut ends
• -Designed to fit wood, composite or aluminum bats
• Color- Graphite

• Our officially licensed Jackie Robinson 42 Bat Grip celebrates one of the best MLB players of all time. Jackie Robinson left a legacy that is remembered as one of the most important in American History.
• The Jackie Robinson 42 Bat Grip comes in 0.5mm thickness and 1.1mm thickness. 0.5mm thickness is most commonly used on wood bats and for players that like a thinner grip and the feel of the bat. 1.1mm thickness is the standard thickness that comes on most bats and is our most popular thickness for players that want extra grip and reduced vibration.
• Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes. Full adhesive back, finishing tape is included.
• Designed to fit wood, composite, or aluminum bats
• Balanced cushion with thickness – 990mm (39inches) in length with pre-cut ends

Product features

LIMITED ADDITION Bat Grip made by Lizard Skins

Lizard Skins Jackie Robinson 42 Bat Grip - Limited Edition DSP Grip Tape 0.5mm & 1.1mm Thickness

The Jackie Robinson 42 Bat Grip comes in 0.5mm thickness and 1.1mm thickness. 0.5mm thickness is most commonly used on wood bats and for players that like a thinner grip and the feel of the bat. 1.1mm thickness is the standard thickness that comes on most bats and is our most popular thickness for players that want extra grip and reduced vibration.

Official Bat Grip of Major League Baseball

Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes.

• Full adhesive back, finishing tape is included.
• Designed to fit wood, composite, or aluminum bats.
• Balanced cushion with thickness – 990mm (39inches) in length with pre-cut ends

A Player of Extraordinary Ability

Renowned for his electrifying style of play, Jackie Robinson played over 10 seasons, hitting 0.311, scored more than 100 runs six times, named to six MLB All-Star teams and led Brooklyn to six NL pennants and its only World Series title in 1955.

Jackie Robinson was the 1947 Rookie of the Year, and the 1949 NL MVP when he hit a league-best 0.342 and 37 steals, led second basemen in double plays four times and stole home 19 times.

Jackie Robinson has displayed tremendous courage and poise in 1947 when he integrated the modern Major Leagues in the face of intense adversity.

Product description

Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing. More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from. For 25 years, Lizard Skins’ mission has been to enhance the athlete’s performance, comfort and style. Our core expertise is the hand-to-grip interface. The key element of that formula is Durasoft Polymer, the first grip to offer enhanced performance and personalization in both feel and fashion. DSP is now everywhere baseball is found, from university to youth programs across the country and in all 30 Major League dugouts. Choose a Thickness Our expertise in grips helps us foresee the players wanted different options to customize the feel and thickness of their bat handle. Unfortunately, bat manufacturers and aftermarket grips had never specified the grip size. As a result, Lizard Skins created the thickness category. DSP bat grip was originally released in two different thicknesses – 1.8 mm to match the average industry size and 1.1 mm to provide a new, thinner option. After further testing, a key group of MLB players requested an even thinner grip that would provide all the same gripping properties but not increase the handle thickness. The 0.5 mm thickness was created to meet the high-performance demands of the world’s most competitive athletes. All three thicknesses continue to be popular today for different preferences and skill levels.

• 1.8 Millimeter Industry standard thickness on stock bats Highest vibration dampening effect Confidence builder for youth
• Comfort for experienced players 990 mm (39 inches) in length with pre-cut ends Full adhesive back Designed to fit wood, composite or aluminum bats Finishing tap is included
• For 25 years, Lizard Skins’ mission has been to enhance the athlete’s performance, comfort and style. Our core expertise is the hand-to-grip interface. The key element of that formula is Durasoft Polymer, the first grip to offer enhanced performance and personalization in both feel and fashion. DSP is now everywhere baseball is found, from university to youth programs across the country and in all 30 Major League dugouts.
• More than just a performance piece, DSP allows players to personalize the feel and style of the bat handle with three different thicknesses and a wide variety of styles to choose from.
• Durasoft Polymer is distinguished by its soft, tacky and light-weight feel that can only be appreciated by touch. Our bat grip is engineered with a strategic pattern to ensure no-slip performance in all weather conditions. How? By reducing vibration and maintaining a consistent swing at the plate. It allows players to reduce stress on the hands by relaxing their grip, while at the same time executing a controlled, comfortable, tension-free swing.