14 best scope mounts

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	Work for m1a eye relief
Answer:	If you want to do a durability test to see how many times you can send a pellet down range before it refuses to hold zero, you can use it on a magnum air rifle. If it is a variable pump, non-magnum (Below 1000 FPS) inert gas, springer (any speed below 700 FPS) or a PCP air gun the answer will be yes. Otherwise if you do expect to use it on a spring piston(springer) or magnum speed rifle of any make the answer will be you can try but your durability will suffer. I have killed 4 scopes over the last 2 years putting them on my pellet rifles(Barksa, Centerpoint, Simmons and Gamo). Now I use magnum airgun rated scopes (Cabela's Brand the best so far and UTG/Leapers).
Question:	Will this fit on a chiappa m
Answer:	Yes, I put it on my 30+ year old Marlin model 60 with the included rings and it not only bolted right on, but I was on paper at 50 yards with the first shot group - only about 4" off target with no pre-sighting at all!
Question:	Would this mount be strong enough for use with a shotgun
Answer:	The rings that come with this scope will not securely attach to the dovetail on either a Marlin XT-22 or a Marlin 795. There is a lot of the scope creep. For the XT-22 I bought weaver scope bases, for the Marlin 795 I ended up buying a UTG air rifle base with integral rings. The scope is great, the rings that come with it are subpar though.
Question:	What is the height from top of rail to bottom of ring
Answer:	I have it mounted on my 10/22 takedown. Fits in the carrying case when mounted, but barely. Great scope for that rifle imo

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• Lightweight 6061 grade aluminum construction
• All Monstrum Tactical optics mounts come with a lifetime guarantee

User questions & answers

Question:	Will this fit my panzer arms ar
Answer:	You can press fn and Q to turn off the backlights, press them again to turn on the backlights.
Question:	I lost my sight in my right eye and would like to shoot right handed with my left eye. What kind of an off-set system do you have that I can do this
Answer:	After you turn it on, backlights is just single color. You can press "fn" + Q or "fn" + lamb key on the right side of the space bar to open the rainbow color. If you want to change different rainbow colors, you can press "fn"+RGB to change different rainbow colors.
Question:	I see a comment below that says it is made of steel, not aliminium, which is it really
Answer:	Yes, these keys works well with original apps from Apple.
Question:	Will this work with a Nikon P
Answer:	There’s two little circles on the bottom corners that you rotate outwards and it’ll let your iPad come right out

Product features

Weighs in at a mere 9 ounces!

Crafted from 6061 Aircraft Grade Aluminum. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount.

Built specifically for 1 inch scopes.

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

Heavy Duty Lockdown

The 12 hardened steel torx bolts allow you torque down your scope mount to specifications without worrying about stripping the screws like competitors.

The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.

• 【Perfect for All 21mm Picatinny/ Weaver Rails】Modkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny/ Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1 inch / 25.4mm Scope Tube.
• 【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.
• 【Premium Aircraft Aluminum, Solid & Durable】Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.
• 【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.
• 【4 Set Of Two Styles 1 inch Scope Rings】2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension: 1.9 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring; 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension: 2.0 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring.

User questions & answers

Question:	Will these fit a 32mm objective lens
Answer:	IF I AM RIGHT 1 LBS- 6 OZ, YOU CAN FEEL THE WEIGHT
Question:	Would this fit my savage 93 17hmr rim fire rifle
Answer:	A springer air rifle will KILL this scope. It will literally fall apart, mine did. This scope is a good value, but not for spring powered air rifles.
Question:	will these fit the henry ar
Answer:	A good way to set up your scope is to mount your scope and bore sight it. With a bolt action, remove the bolt, set the rifle in a gun vise (like a lead sled), set a target at 25 yards, look thru the bore and adjust the scope to same spot on the target that you see thru the bore. (With a lever gun or semiautomatic, you will need a laser bore site). Fire a shot at the target. You should be on the paper. Adjust the shot to the center of the target. Now set a target at 100 yards and fire a 3 round group. Adjust your scope to the center of the group and fire another shot. This should put you dead center at 100 yards. Follow the ballistics charts for your rifle caliber as a guideline for bullet drop and trajectory. There is no better way to find out what each mil dot represents than to fire your rifle at different ranges to know what yardage each dot will represent.
Question:	Can they fit on 20 moa mount
Answer:	How to mount it on a 7.62x54r

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

Product description

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 2in Offset, 1. 59in/40. 39mm, Black CM-102, Matte, 2" Offset (1. 59" / 40. 39mm)v 2. 5" Between Rings

• Included Components: Set Of Rings

User questions & answers

Question:	Will these work for my vortex crossfire ii 3-9x50 riflescope w/ v-brite reticle(.270 rem adl rifle) ty
Answer:	Yes. It will fit any firearm that has a Pic rail.
Question:	How sturdy is this mount with a scope on it is it very secure
Answer:	I too am losing sight in right eye (currently have 60-70% vision and im right handed. I shoot with my left eye right handed for my handguns and left handed left eye for my rifles. Best advice....learn to adapt, i did.
Question:	Will this provide enough clearance to mount a 50mm objective NightForce Scope on top of an AR
Answer:	Definitely aluminum. The fasteners may be made of steel, but the mount itself is aluminum.
Question:	Will this work on a Ruger precision rifle with the 20 moa base with the vortex viper pst 6-24x50 with the sunshade
Answer:	NO! The rings are spaced too far apart to be able to fit the Nikon P-223, keep in mind the P-223 is a very short scope, the rings overlap where the scope flares for the lenses by about .5 inch or so. I would suggest getting the Nikon mounts or individual rings.

• Double scope ring mount for Picatinny/ Weaver Rail (21mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
• With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

User questions & answers

Question:	Can you advise pls approximate height from rail to center of ring
Answer:	Did this mount work for your scope? I just bought that exact scope for my T/C Ventire 270win and wanted to know if u cleared ur barrel? Thanks
Question:	Tall enought to clear a scope with a 50mm front lens
Answer:	The mount is very sturdy. I use it with a Nikon P-300 mounted on a 300BLK rifle. I've never had any problems. Make sure to use locktite on screws.
Question:	Will this fit my benjamin nitro piston
Answer:	I have the 1.5" version of this in top of an AR10 (similar mount) and it's too low to clear my 50mm objective crossfire. You want this one. I'll post again after I get it mounted, but I only need another .25" so I'm confident this will resolve my problem.
Question:	Will these fit a 40mm scope
Answer:	If you have to ask that question, you don’t deserve that rifle...

Product features

Double scope rings mounts

• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The rings are for most scopes which are in 1''/ 25.4mm scope tube. They are mounted on the 21mm Picatinny and Weaver Rail easily.
• With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly.
• Install and remove by tightening or loosen nuts or screws with a wrench.

• 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
• Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
• 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
• Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
• Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch

User questions & answers

Question:	Will this fit vortex 4x12x44mm? One person said it fit and other person said does not, im confused
Answer:	pretty close to 1 1/8 inch top of rail to center.
Question:	Will this work on dovetail system
Answer:	Not really. My 50mm scope fits... but the focus ring on front just touches my top rail. I would get something else for a 50mm scope. probably going to return these.
Question:	Will the 1” rings work with a 50mm objective lense
Answer:	Yes. No problem.
Question:	What are the torque specs
Answer:	Is your 40mm scope have a 1 inch (25mm) tube?

Product description

Features a rear ring that is pushed forward 2 inches, resulting in better eye relief. This scope mount is designed to fit type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection.

• Mounting rings are pushed forward 2" for better eye relief
• Designed for mil-spec upper receivers with 1913 Picatinny rail
• 6061 T6 extruded aluminum construction
• MIL-A-Type 3 black hard-coat anodize
• Ridged and lightweight; Made in the USA

User questions & answers

Question:	Can iy be mounted in reverse to bring scope close to shooter for eye relief
Answer:	I just received the 0.8" height rings and mounted a Vortex 4-12x44 Copperhead scope on a Picatinny rail equipped bolt action. The fit was perfect.
Question:	Will this work on 7.62x54r
Answer:	no they will not. they only mount to a picatinny rail mount or weaver style mounts. these are too wide for dovetail .
Question:	Does this work on Ruger Precision Rifles
Answer:	If the diameter of your scope is one inch you can use the one inch diameter rings. Now what you have got to deal with is the height of the rings which will probably have to be a "high" ring to use with a 50MM objective lens. Medium rings might give you clearance between the scope objective end and the barrel but I doubt it. If you are mounting it on an AR platform it would probably work. Ya just have to try different combinations sometimes to get the right fit for you!
Question:	Where is this made
Answer:	While the rings did not give recommended torque specs my scope recommended no tighter than 15 inch pounds

Product features

Manufacturing

'At Aero Precision we’re known for two things: superior engineering & machining, and the ability to get the customer what they need, when they need it. Our products have been recognized across the country by members of the military and law enforcement communities for a simple fact - they work better.'

Aero Precision’s roots are deeply tied to aerospace, and our drive for clean, perfect engineering and machining stems from that. When you’re building something that will fly in the air, there is no margin for error. We take that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design and machining of every part that comes off the line. We’re not every manufacturer.

• These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches (19.05 mm) from the base. Sold two rings per package.
• The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
• Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
• Fits Weaver and Picatinny Rails.
• Weight (Per Ring): 39.9 Grams - 1.41 oz

User questions & answers

Question:	Well i have a savage 110 tactical 308 with 20moa picatinny rail in 308, my scope is pa 4-14×44 30mm, do you think i can make it with 30mm low
Answer:	Yes, but I would go with the SL2 or SLX. Strictly for better capacity and performance
Question:	Ruger precision. 300 win with vortex golden eagle should i go low or medium rings
Answer:	It should,it fits my x7 and tm15
Question:	I have ruger m77 hawkeye 300 min mag with vortex viper hs lr 30mm rifle scope which vortex scope rings do i need to purchase
Answer:	You should ask the seller directly.
Question:	Will these rings need to be aligned and lapped
Answer:	Yes, all tanks have a universal connection I plan to buy this tank for my tmc also.

Product description

Bestsight Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting





Specifications:



Material: Aluminum Alloy

Color: Black

Ring Diameter: 30mm (1.2”)

Reducer Diameter: 25.4mm (1”)

Product weight: 0.5lbs.

Package dimensions: 7.0 inch x 2.5 inch x 2.56inch





Package includes:

1 x Dual Ring Scope Mount

2 x Plastic ring diameter 1 inch(25.4mm)

1 x Wrench

• Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
• [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
• [Easy to Operate]Scope mount with two round buttons for easy detach.
• [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Defect: Whether it is installed or disassembled, you need to remove 12 screws

User questions & answers

Question:	Will this work on my cva scout v2 .45-70 govt
Answer:	Go with a mount with no forward cant. This is to push the scope forward and still be able to mount to the receiver.
Question:	do the screws holding the scope need to be torqued to specific amount
Answer:	It will work on any firearm regardless of caliber as long as the firearm has a mil spec 1917 picatinny rail or equivalent on top. Since you asked 7.62x54r, I'm going to guess Mosin Nagant. You'll need an adapter to mount this. Also, you might be better served with scope rings instead as they allow for a lower scope placement. This mount was designed for AR style weapons so it rests quite high.
Question:	Can this be mounted on gamo 6110017154 varmint air rifle .177 cal
Answer:	This item will fit on a Ruger Precision Rifle, but is designed to push the scope forward for more eye relief. I believe the standard model or the extended version would be a better fit on a bolt action rifle than this SPR mount.
Question:	what is the ring height from base of the mount to bottom of the ring? Will this fit a 54 mm objective lens scope on a flat top pictanny rail
Answer:	This is made in the USA at their factory in Tacoma, WA.

Product description

Aero Precision Ultralight 30mm Extended Scope Mount features a rear ring that is pushed forward 1 inch, resulting in better eye relief. This scope mount is designed to fit upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. Aero Precision Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

• Rear ring is pushed forward 1" for better eye relief
• Designed for mil-spec upper receivers with 1913 Picatinny rail
• 6061 T6 extruded aluminum construction
• MIL-A-Type 3 black hard-coat anodize
• Department Name: Unisex-Adult

User questions & answers

Question:	Is the part number for this apra
Answer:	Will work yes. However I believe to high for. Lever action rifle
Question:	I lost the tightening tool for the screws, and am looking for a replacement. I'm wondering, are the screws/tool are proprietary
Answer:	The screws can be torqued until theyre tight enough that the scope does not wobble at all, then you can zero the scope itself for accuracy.
Question:	Will this elevate the scope high enough to clear fixed front sights
Answer:	As long as it has a weaver style rail (Picatinny rail) on top, it will fit.
Question:	What's the difference between this model and the "SPR" model
Answer:	I had to get a cantilevered mount to get my 4.5x-18x 40mm Bushnell to mount forward of the charging handle of my Ruger AR-556. I don't know why they give the measurements that they do, but as best as I could measure without taking it back off the rifle, it is one inch from the bottom of the mount to inside of the ring for a 30mm scope, or 1 & 1/16" with the sleeves for a 1" scope. As for a 54mm objective, it is satisfactory with my 40mm, but I would actually prefer a slightly higher mount.

Product features

Manufacturing

'At Aero Precision we’re known for two things: superior engineering & machining, and the ability to get the customer what they need, when they need it. Our products have been recognized across the country by members of the military and law enforcement communities for a simple fact - they work better.'

Aero Precision’s roots are deeply tied to aerospace, and our drive for clean, perfect engineering and machining stems from that. When you’re building something that will fly in the air, there is no margin for error. We take that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design and machining of every part that comes off the line. We’re not every manufacturer.

• Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
• With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.

User questions & answers

Question:	the small metal piece that i mount to Picatinny rail wont sit flush. its not tall enough. what do I do about this? Is there a fix or do i return it
Answer:	Ap210500 is that part number
Question:	Will these work on a Ruger ar-556 without having to remove the front sight from factory
Answer:	You need a T15 Torx driver to screw them in. Don’t over tighten them though. I believe you can get replacement screws directly from Aero. They sell them separately.
Question:	I will be mounting on a Del-ton ar15 with fixed front iron sights. Will I still be able to use the sights and will the scope clear the front sight
Answer:	I do not have fixed front sights on my AR. I have flip down Troy sights. But you should see right through your fixed sight.
Question:	Will this be adequate for mounting a scope on an AR
Answer:	SPR is a bit more forward for clearance for you to access your charging handle.

Product features

Scope mounting rings are essential pieces of equipment for avid hunters and shooting sports enthusiasts.

A fantastic rifle and a premium scope needs high quality scope rings to hit the mark consistently with competition grade accuracy each and every time. Modkin Scope Mounts turn every hunting/shooting trip into a memorable one.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 21mm rail easily.

Hunting

Adventure

Training

• Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	will this work for a vortex crossfire ii? 1-4x
Answer:	The cross pins must drop into slots in rail. It's easier if you mount the mounts to the rail, then put in the scope.
Question:	Plan to mount vortex crossfilre ii adjustable objective 30mm on ruger pc carbine. does this mount work for them
Answer:	yeas i believe so i removed pac9 chiappa front post on firearm i use them for and installed full size rail and back up sights (tactcon) and they worked perfectly with those .so i can see thru my red dot right on middle if i don't use red dot .good product .sturdy easy install .good luck.i hope this helped ..rally
Question:	Can this take a 50bmg
Answer:	I could not on mini 14
Question:	How can you trust these the QD levers don't lock
Answer:	Hello, sure it is no problem to mount a scope on your AR15 with the product. And rest assured that the scope rings is adequate for all 20mm picatinny rails.Hope the answer is helpful to you.Regards,Modkin

• Highly designed for the toughest situations
• Quality Machined with precision and accuracy
• Mounts that will be used for any environment
• Places your optic at the Ideal Height for MSR and similar platforms

User questions & answers

Question:	Is this a 1” tube
Answer:	Yes. Scope has 30mm tube and mount is 30mm. The scope has 4.0 inch eye relief which is plenty if installed on an AR.
Question:	Why does it say 40mm Mount? Once it was purchased
Answer:	The person that said the Crossfire II has a 1" tube is not necessarily correct. I bought a Crossfire II 1-4x24 and it is absolutely a 30mm tube. The larger magnification Crossfire IIs may likely have a 1" tube. Check the specs of the scope you have before ordering your mount!
Question:	So am i getting a 30mm or the 40mm it adds to my cart need a 30mm
Answer:	If you have a .50bmg you have enough money to get a actual Giselle or American defense lol. But on a serious not do not put a 30 mount on a .50 bmg
Question:	What is the height of the center of the ring from the rail, will a 50mm lens scope clear the rails alright
Answer:	Mine lock down. If yours don't they are not adjusted correctly.

Product description

UTG ace-sync 30mm high profile 50mm offset Pica tinny scope ring mount, Aircraft grade aluminum, precision cut inner ring, single mount utilizes locking torn screws and integral Pica tinny recoil stops for a secure zero hold, 100mm base, 22mm saddle height, Matte Black anodize.

• Designed with significant lightening cuts to massively reduce weight without compromising durability
• Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets
• Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold
• Precision CNC Machined from aircraft grade aluminum with a Matte Black anodize, designed to fit on MIL-STD-1913 Pica tinny rail platform
• 22mm saddle height, 50mm Offset distance, 112mm base length, high profile fits 30mm tube optics with up to a 73mm outer objective diameter

User questions & answers

Question:	Will this item attach to 11 mm mount
Answer:	They come in both 1” and 30mm.
Question:	Is the earth flat tone color available or will you carry it in the future
Answer:	I purchased as a 30mm mount,as you probaly know mm refers to scope tube size,great mount very strong and positions scope perfectly on my DD-AR10,if mount is truly a 40mm tube,only a 40mm scope will work.
Question:	Will a 50mm scope clear a full rail mlok upper
Answer:	I have one. It's 30mm.
Question:	What is the size of the screws
Answer:	It should, the mount sits about 1.5" above the rail

Product features

UTG ACCU-SYNC30mm Integral Picatinny Rings

Detail Information:

• UTG ACCU-SYNC 30mm High Profile 37mm Offset Scope Rings, Comes in a Pair and Designed for a Precise Fit on MIL-STD-1913 Picatinny Rails
• Precision CNC Machined from Aircraft Grade Aluminum and Finished in a Matte Black Anodize
• Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability
• Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
• Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops For a Secure Zero Hold
• 22mm Saddle Height, 37mm Offset Distance, 33mm Base Length, Fits 30mm Tube Optics with up to a 73mm Outer Objective Diameter
• Includes a T20 Torx Wrench for Simple and User Friendly Installation

About Us

We set un-compromised high standards for all of our business operations. Our goal is to provide a total solution for any line of products we offer. We pay close attention to industry trends with a focus on making the products available for hunting, shooting and outdoor enthusiasts like you.

In 2009, we made an important decision to start our Made-In-the-USA Manufacturing Operation. We will continue to follow our vision for U.S. made products, to be innovation-driven.