12 best rifle scope with rings

• These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches (19.05 mm) from the base. Sold two rings per package.
• The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
• Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
• Fits Weaver and Picatinny Rails.
• Weight (Per Ring): 39.9 Grams - 1.41 oz

User questions & answers

Question:	Well i have a savage 110 tactical 308 with 20moa picatinny rail in 308, my scope is pa 4-14×44 30mm, do you think i can make it with 30mm low
Answer:	Yes, but I would go with the SL2 or SLX. Strictly for better capacity and performance
Question:	Ruger precision. 300 win with vortex golden eagle should i go low or medium rings
Answer:	It should,it fits my x7 and tm15
Question:	I have ruger m77 hawkeye 300 min mag with vortex viper hs lr 30mm rifle scope which vortex scope rings do i need to purchase
Answer:	You should ask the seller directly.
Question:	Will these rings need to be aligned and lapped
Answer:	Yes, all tanks have a universal connection I plan to buy this tank for my tmc also.

• Specification: 3-9x40
• Magnification: 3-9x
• Objective Diameter: 1.57
• Exit pupil: 0.2
• Length: 12.20

User questions & answers

Question:	Is it good for a airsoft sniper
Answer:	It might work if it doesn't you can always return it
Question:	Will this scope work for .22air rife
Answer:	I put mine on a .177 nitro piston air rifle shooting 1200fps and it has been a perfect match for eliminating garden pests from 15 to 40 yards. Make sure you purchase dovetail scope rings that are high enough to provide clearance for your particular rifle, (medium profile minimum).
Question:	would this scope be ok for a .22 rifle
Answer:	You betcha. I have one on a Ruger 10 22 LR rifle and it works wonders. Took me about 20 to 30 minutes to get the scope 0 did good, but it is a nice asset to my rifle. I would recommend it. Hope this helps.
Question:	is it sock resistant
Answer:	Unfortunately, it is not sock resistant. As a matter of fact, socks will actually dissolve the scope. You've been warned. Oh, and dont feed it after midnight, OR get it wet..

Product features

SHARP, CLEAR, BRIGHT - CVLIFE SCOPE

CVLIFE has scopes that can perform in any condition and environment. CVLIFE'S Fully-Multi coated lenses can deliver an amazing 95 percent light transmission across 300 percent more of the visual light spectrum for a high-contrast and color accurate picture, ensuring that the picture stays visible by keeping fog, rain and dirt off the lenses so you never miss a moment.

Use Friendly 3-9X Power Ring

Precise Elevation & Windage Adjustment Turrets

20mm (0.79 Inches) Picatinny Mount

CVLIFE 3-9x40 R4 Reticle Crosshair Scope with Free Mounts

Specification of the Scope

• Magnification: 3-9x
• Objective Diameter: 1.57" (40mm)
• Exit pupil: 0.2"-0.67" (5.1mm-16.9mm)
• Length: 12.20"(31cm)
• Weight: 0.76lb.(345g)
• Tube diameter: 1" (25.4mm)
• Free Offer Rail Mounts: 0.79"(20mm)
• Field of View: 25'-14'@100yards
• Mount ring dia. 1" (25.4mm)
• Click Value: 1/4inch@100 yds

Special Inner and Outer Structure

• The scope includes a Special inner and outer structure to control the interaction between the inner and outer tubes of the scope, which provides long lasting reliability in these interaction and ensures the reticle would not rotate when adjusting. This smart design makes the scope shockproof and provides more precise windage and elevation adjustment.
• Built on an ultra strong 1 inch machined-aluminum tube. Completely sealed and 100% nitrogen filled makes it fog and rain proof. This scope could be used under any weather condition.

• Magnification: 6-24x
• Objective Diameter: 50mm
• Field Of View: 28 ft @ 100 yards
• Click Value: 1/8 inch @ 100 yards
• Illuminated Type of the rifle scope: Red and Green

User questions & answers

Question:	how much does this scope weigh
Answer:	I went with a 6-24×50 on my 110 tactical 308 and I asked vortex what ring I need for my seat up and they said to go with the med..
Question:	Will this scope work with an air rifle/pellet gun (specifically a Beeman RS
Answer:	I have rpr .300 prc with vortex viper 6-24x50 with these rings in medium and maybe 1/16 clearance I would go with high
Question:	how will the mildots work on my 7mm rem mag if i sight dead on at 100 yds
Answer:	Medium should work fine if your worried buy set of high it won't hurt
Question:	will it hold up to 7.62x54r
Answer:	Aligned, possibly, lapped, not even a little. I used the Wheeler kit, but only used the alignment bar, to ensure I had full contact. And I did. Lapping nowadays just isn't much of a thing.

Product features

Adjustable Objective (AO) lens

The adjustable objective (AO) lens can be moved by the parallax dial at the end of the scope. This adjustment allows for a sharper target image, elimination of parallax, and range estimation.

Adjustable Eyepiece

Eyepiece with dioptric adjustment lens eliminate most of image aberration，adjustable ocular provide a clear image for nearsighted or farsighted users without glasses.

Reliable Windage and Elevation

Well-designed and constructed turrets allow for crisp, consistent and precise windage and elevation adjustments, it can fast to adjust and the caps can be removed to reset the zero. Precise Hand-Turn 1/8-inch @100 Yards Click Adjustments,you can aim perfectly at any time.

Easy to Mount

Fits all standard 20mm Picatinny or Weaver rail

• 【Perfect for All 21mm Picatinny/ Weaver Rails】Modkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny/ Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1 inch / 25.4mm Scope Tube.
• 【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.
• 【Premium Aircraft Aluminum, Solid & Durable】Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.
• 【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.
• 【4 Set Of Two Styles 1 inch Scope Rings】2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension: 1.9 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring; 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension: 2.0 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring.

User questions & answers

Question:	Will these fit a 32mm objective lens
Answer:	IF I AM RIGHT 1 LBS- 6 OZ, YOU CAN FEEL THE WEIGHT
Question:	Would this fit my savage 93 17hmr rim fire rifle
Answer:	A springer air rifle will KILL this scope. It will literally fall apart, mine did. This scope is a good value, but not for spring powered air rifles.
Question:	will these fit the henry ar
Answer:	A good way to set up your scope is to mount your scope and bore sight it. With a bolt action, remove the bolt, set the rifle in a gun vise (like a lead sled), set a target at 25 yards, look thru the bore and adjust the scope to same spot on the target that you see thru the bore. (With a lever gun or semiautomatic, you will need a laser bore site). Fire a shot at the target. You should be on the paper. Adjust the shot to the center of the target. Now set a target at 100 yards and fire a 3 round group. Adjust your scope to the center of the group and fire another shot. This should put you dead center at 100 yards. Follow the ballistics charts for your rifle caliber as a guideline for bullet drop and trajectory. There is no better way to find out what each mil dot represents than to fire your rifle at different ranges to know what yardage each dot will represent.
Question:	Can they fit on 20 moa mount
Answer:	How to mount it on a 7.62x54r

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

Product description

Features:

Fits all 11mm rail

Features in high profile, one of the ring mounts design with removable stop pin, provide solid mounting on the rail.

The ring is for most scopes which are in 1 inch/ 25.4mm scope tube.

Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.

Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

With two rail clamp screws and two scope clamp screw per side, Precision and Repeatable Alignment.



Specification:

Rail Type: 11mm Dovetail Rails

Ring Diameter: 1 inch

Material: High Quality Aluminum Alloy

Style: High Profile (0.8 inch)

Dimension: 1.9 x 1.57 x 0.79 inch

Weight: 1.8 ounce per ring



Package Content:

2 x 1 inch Dovetail Scope Ring

1 x Hex Wrench

• Double scope ring mount for 11mm dovetail mounts.
• One of the dovetail rings features a stop pin, for rock solid application.
• High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch).
• The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube.
• With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.

User questions & answers

Question:	Will this work on a remington 597 22lr factory rail
Answer:	Well I know that they will fit scopes with 1" shafts and 32mm equals 1 1/4 inches. So if 32mm is the diameter of your scopes shaft, it seems it would not fit.
Question:	Will this fit a 22 cricket
Answer:	It will depend on the mounts you have on the rifle if the scope rings would fit. Such as a Weaver rail or Picatinny rail, there are also others.
Question:	Will the stop pin fit on a regular rail or does it need a hole to register in
Answer:	Probably not. If you get the right bases, it will fit. They would look ugly.
Question:	can the pin be removed
Answer:	Yes they will

Product description

The Simmons 22 Mag Series continues the TRADITION of being America's most popular Rimfire scope, but that's where the resemblance ends. Featuring Simmons' patented truezero adjustment system and qta quick target acquisition eyepiece, the 22 Mag Series scopes deliver unparalleled performance-bar none; each 22 Mag scope comes complete with a set of Rimfire rings to get you up and mounted in no time. Finish: black matte field of view (ft 100 yds): 33/11 eye relief (inches): 3.75 exit Pupil (mm): 10.7-3.6 weight (oz): 10.3 click value (MOA): adjustment (range): 60/60 reticle: Truplex Parallax settings: 50 yds.

This riflescope belongs to the feature-rich, ruggedly built Simmons family of scopes. Shot-after-shot, hunt-after-hunt, these scopes deliver stunning on-game performance, reliability, and value thanks to fully-coated optics and a complete set of mounting rings. SureGrip adjustments make for easy adjustment, even while wearing gloves. Plus, the QTA (Quick Target Acquisition) eyepiece delivers a constant 3.5 inches of eye relief through the entire magnification range.

Features:

• High-quality optical glass and fully-coated optics deliver bright, sharp images
• HydroShield lens coating helps maintain a clear sight picture, regardless of weather conditions
• Simmons' SureGrip rubber surfaces for easy adusting in any shooting conditions

Specifications:

• Description: 3 - 9 x 32 A/O
• Field of View (ft. @ 100 yds): 31.4/10.5
• Eye Relief (inches): 3.75
• Exit Pupil (Millimeters): 10.7 - 3.6
• Weight (ounces): 10.8
• Click Value (MOA): 1/4
• Adjustment (Range): 60/60
• Reticle: Truplex
• Parallax Settings: Parallax Adj.

• Features Truplex Reticle. Waterproof, fogproof and shockproof
• Parallax correction preset from 50 yards to infinity
• Rimfire 3/8" dovetail mounting rings included
• HydroShield coating ensures a clear sight picture
• SureGrip rubber surfaces simplify adjustments under any conditions
• High-quality optical glass and fully-coated optics deliver bright, sharp images
• HydroShield lens coating helps maintain a clear sight picture, regardless of weather conditions

User questions & answers

Question:	It says shockproof, is the gun actualy rated for use on an air rifle
Answer:	No they won't, these work on the 11mm rail that is on air rifles and many older 22s. The 597 uses a 22mm weaver rail that most centerfield rifles use, get medium height rings for a weaver rail and you are good to go. That's what works on my 597 with factory rail
Question:	will this fit marlin model 60 with equipment provided with scope thankd
Answer:	If the cricket has the smaller, rimfire / air rifle grooves or rail then yes, 11mm = 7/16" is what this fits.
Question:	What size rings come with this scope
Answer:	It will fit on a regular rail, no pin stop hole required. The pin stop on the scope ring is a allen wrench screw in the center of the ring. You can raise and lower it using a allen wrench.
Question:	Will this work on a Ruger 10/22 Carbine
Answer:	The pin is there to keep scope mount from sliding. Depends on the manufacture as to whether you can pull or tap pin out. Hope that helps.

Product features

A Rimfire Riflescope That Delivers Big-Game Performance.

How do you improve America’s most popular rimfire scope? By adding some of the innovative features that distinguish Simmons from all the rest. Like our QTA (Quick Target Acquisition) eyepiece with plenty of eye relief to make acquiring targets a snap. And our SureGrip adjustments for easy adjustment, even while wearing gloves. Add our fully coated optics and complete set of mounting rings, and you’ve got one of the finest, most reliable rimfire riflescopes available anywhere – at any price. For big-game optics in a rimfire riflescope Simmons .22 MAG is in a class all its own.

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	Work for m1a eye relief
Answer:	If you want to do a durability test to see how many times you can send a pellet down range before it refuses to hold zero, you can use it on a magnum air rifle. If it is a variable pump, non-magnum (Below 1000 FPS) inert gas, springer (any speed below 700 FPS) or a PCP air gun the answer will be yes. Otherwise if you do expect to use it on a spring piston(springer) or magnum speed rifle of any make the answer will be you can try but your durability will suffer. I have killed 4 scopes over the last 2 years putting them on my pellet rifles(Barksa, Centerpoint, Simmons and Gamo). Now I use magnum airgun rated scopes (Cabela's Brand the best so far and UTG/Leapers).
Question:	Will this fit on a chiappa m
Answer:	Yes, I put it on my 30+ year old Marlin model 60 with the included rings and it not only bolted right on, but I was on paper at 50 yards with the first shot group - only about 4" off target with no pre-sighting at all!
Question:	Would this mount be strong enough for use with a shotgun
Answer:	The rings that come with this scope will not securely attach to the dovetail on either a Marlin XT-22 or a Marlin 795. There is a lot of the scope creep. For the XT-22 I bought weaver scope bases, for the Marlin 795 I ended up buying a UTG air rifle base with integral rings. The scope is great, the rings that come with it are subpar though.
Question:	What is the height from top of rail to bottom of ring
Answer:	I have it mounted on my 10/22 takedown. Fits in the carrying case when mounted, but barely. Great scope for that rifle imo

• -- One of the rings has a stop pin the bottom of it for rock solid application
• -- With four screws Design, it will hold the scope more securly than a single screw on both sides
• -- Scope Rings Type: Medium Profile (14mm),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount
• -- Scope rings are for standard riflescopes 25.4mm scope tube
• Pack in Lirisy Exclusive design packing box,make it different and special,good gift to your boy friend,father,grandfather.

User questions & answers

Question:	Do these fit & work ok on a Henry 001 lever 22 or oo3T pump (dovetail rails
Answer:	It worked just fine for me. I would buy another one.
Question:	Will this fit the rail of a Ruger .177 pellet rifle
Answer:	I don’t think the rail will fit to the Chiappa !
Question:	will these fir a benjamin 342 air rifle
Answer:	The mount attaches to the rail with four screws. Each screw has a cleat that locks into the rail so I can’t imagine this mount would shift on the rail. Each of the scope rings has four screws and plenty of surface area to grip the scope. Even though it says “slim” it seems plenty strong enough for heavy recoil.
Question:	will these fit on a ruger american
Answer:	The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance.

Product features

1" Scope Rings Fits 11mm Dovetail Rail

• Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail rail.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With two mounting screws for the bases and four screws for each of the two scope rings. It will hold the scope more securely than a single screw on both sides.
• One of the rings has a stop pin the bottom of it for rock solid application

Product description

Weaver .22 caliber see-thru dovetail rings accommodate open sight or scoped firearms to give shooters the ability to place shots with excellent precision. These rings allow for a variety of scope mount configurations, so hunters can have the ideal Sig

• See through design allows Use of open sights
• Allow for a variety of scope mount configurations
• Have the ideal sight for any situation
• Accommodates 1-inch scopes, mounts on firearms with 3/8-inch dovetail receiver
• See-through design allows use of firearms with open sights or scope
• Aircraft-grade aluminum for rugged, lightweight performance
• Made in U.S.A

User questions & answers

Question:	Do these require relief cuts across the dovetail for clearance to the tightening bolt
Answer:	If you've got a 1" scope and a dovetail rail, they should work fine. Work very well on my 10/22 (Ruger). (Hoping to get a Henry for Christmas...but afterwards will prob'ly just be wishing I did. lol Nice rifles.)
Question:	Will you still be able to see the iron sights if you mount a 50mm scope on these rings
Answer:	It fits 11mm That is roughly 7/16 if you have no metric measuring tools. You can google the size of the rail for your Ruger since I know nothing of pellet rifles
Question:	will these fit a crosman 1077 air pellet gun
Answer:	As long as that rifle has a "male" 11mm dovetail for scope mounting.
Question:	How tall are these mounts? I want to know if they are high enough so that a 40mm front optic will clear my Marble's bullseye rear sight
Answer:	This set of rings is made for the dovetail on 22lr.. It fit my Marlin, Savage and 10/22 Ruger. I do not own any firearm that has a free floating barrel.

• These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.
• Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
• Made from aircraft-grade 6061-T6 aluminum for optimum strength.
• Sold two rings per package.
• Base Clamp Screws:25-30 in/lbs

User questions & answers

Question:	Will these work on the AR15 rifle, if so what height is recommended
Answer:	Yes, these mounting rings work perfectly on an AR15. I have them mounted on my AR15 and they are 1.5" high from the mounting grooves to the center of the scope rings. However, they are not compatible with the standard AR15 iron sights or the standard 'Carry Handle' upper receiver of a stock AR15. In order to use these rings, the AR15 must have a 'Flat Top' upper receiver. However, you don't have to give up iron sights in order to mount a scope. There are various 'Back-Up' iron sights (BUIS) available that can be mounted on the side of the upper rail and used in case the scope gets damaged or out of alignment. There are photos on the internet that will illustrate the above setup. Hope this helps!
Question:	will these fit 20mm picatinny rail
Answer:	Yes. Should fit fine.
Question:	Will these rings work in picattini bases? What brand you recommend
Answer:	These rings will work w/any Weaver style bases to include picitiny Bases. Jon
Question:	Will these sit high enough for a crossfire II 50mm scope
Answer:	These Vortex Hunter Rings (Medium) position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.http://www.vortexoptics.com/product/vortex-hunting-1-inch-rings-mediumThe front "bell" of most of the 50mm Crossfire II scopes that use 1" rings is either 2.44" wide (4-12x50) or 2.24" wide (3-9x50) so whichever one you are talking about, cut that number in half (1.22 or 1.12). Then if you put a straight edge on your scope bases, measure up 0.87 inches (center height of the MEDIUM rings). If that is at least 1.22 or 1.12 off the barrel (depending on which 50mm Crossfire II you are looking at) the MEDIUM rings will work. If not you will need the HIGH rings (position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base) will be needed.

Product description

Features:

Fits all .22/Airgun rail and some rifles, such as Henry 22LR, Marlin model 60 70, Marlin 995, Air pistols and so on. (for a flat rail)

The ring is for most scopes which are in 1''/ 25.4mm scope tube.

Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.

Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

With two rail clamp screws and two scope clamp screw per side, Precision and Repeatable Alignment.



Specification:

Rail Type: 11mm Dovetail Rails

Ring Diameter: 1''

Material: High Quality Aluminum Alloy

Style: High Profile (0.79'')

Dimension: 1.97 x 1.77 x 0.59 inch

Weight: 1.15oz per ring



Package Content:

2 pcs 1'' Dovetail Scope Ring

1 x Hex Wrench

• Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'')
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.

User questions & answers

Question:	Will it fit a 3/8 rail
Answer:	I don't know that I understand exactly your question, I bought two sets of these scope mounts, and put them on two Savage 64F rifles, with very little work, just basically tightening up the dovetail bolt and sighting in the scope, no other work was necessary for my set up. The see through base allows us to use the iron sights, or also use the scopes depending on the target we are using. I am happy with these mounts on the 22LR rifle, although I don't know anything about using them on a higher caliber rifle.
Question:	Can you easily see hard sights through these
Answer:	Depends on how tall the iron sights are. I measured 32mm from center of scope to bottom of iron sight hole on the scope ring and 7mm from bottom of hole to dovetail. So if your iron sights are shorter than 14mm, you should be good.
Question:	Will this fit a pinty (or cvlife) 3-9x40 red green rangefinder illuminated optical sniper rifle telescopic scope
Answer:	Yessss
Question:	Will these work on the gamo air rifles. Gamo uses the smaller rail
Answer:	I have a Remington 597 with a 3-9X40 scope and and I have plenty of clearance for my iron sights. The bottom of the tube of the scope looks like it sits about an inch above the receiver with the mounts I have.

• Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.
• When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.
• This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.
• Sold two rings per package.

User questions & answers

Question:	With this fit my vortex 20x50 scope on a precision rifle? I bought the medium rings and they are to small
Answer:	yes
Question:	Is it 19.00 for 1 or a pair
Answer:	On my rifle I can only see the front sight through the mounts.
Question:	will these fit weaver mount. base
Answer:	IT DEPENDS HOW FAR YOUR 1 in. tube is from the front of your eye apperature, also the same for your 50 mm front apperature and if you would have enough room to slide your scope back and forth for proper eye releif. I mounted a cheap scope on Marlin model 60 semi auto with these mounts.
Question:	I'm fairly new to the shooting sports, when speaking of scope mounting and the rings used to mount the scope, what is mean't by lapping the rings
Answer:	I don't think it will go any smaller than the dovetail on a standard 22 rifle. Check the distance between dovetail valleys if it's much less than 11mm it won't work.