9 best red dot views

Product description

Make your rifle, pistol, or shotgun even better with the Venom Red Dot sight. A 3 or 6 MOA dot promotes rapid target acquisition, while providing a precise point of aim—getting shots down range and on target fast.

• The Venom Red Dot Sight-6 MOA promotes rapid target acquistion while providing a precise point of aim; getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.
• High quality, fully multi-coated lens offers a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.
• The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers.
• 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.
• The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility.

User questions & answers

Question:	Does this fit a standard glock 17 gen 3 (not mos)? i believe i need a glock mount plate. do you know what mount plate will work for the vortex venom
Answer:	You can get a plate for Glock Gen 3/Gen 4 that mounts using the rear sight dovetail from EGW (Evolution Gun Works) or you can mount to the rail with something like a UM Tactical UM3 rail mount (mount surrounds the slide and optic is forward), or you could send your Glock out to have it milled for the optic plate. Best option is having the slide milled. If you want the plate from EGW for the Vortex Venom - it is their part number 49313. Keep in mind that this mount plate is aluminum and even a brass punch will damage it. You should use phenolic/plastic or wood dowel punch to align in the dovetail and be prepared to remove some material from the plate dovetail to get it to fit. It has set screws to hold in place - but you should also use locktite. Also keep in mind that using the dovetail plate will place the optic higher than it would be than if the slide was milled. I have Glock 19 MOS with the plate included, and a Trijicon RMR. I could say that mounting to the dovetail will take the gun (Glock) and make the dot acquisition even more difficult. If you are just getting your feet wet on the idea of an optic, then the dovetail might be a low cost way to go. I have also SIG P226 with Romeo1, Canik TP9Sfx with Trijicon RMR also. Both the SIG and Canik are much better in terms of dot acquisition in my opinion than the Glock 19 MOS. Good luck. I have a Vortex Venom that I initially placed on a S&W Victory .22 using the supplied rail - the Venom did not have enough vertical adjustment range to bring up point of aim. I put a Trijicon RMR on it and it was fine. My experience with the Venom may be a fluke, but without changing the mount, the RMR was fine. Good luck.
Question:	Is this sight's brightness fully adjustable
Answer:	The Venom Red Dot has 10 levels of brightness settings.
Question:	Installing this on a fnx 45 tactical, does that require any additional mounting hardware or is it a dirrect fit
Answer:	Yes it does mount to an FNX-45 Tactical, I know because I did it! Just use 2 of the 5-40 mount screws that should have come with your FNX-45. No mount plate, mods or anything extra required. Just 2 screws with a little blue lock-tite. Works perfectly!
Question:	Does this have a rail mount on it? Will it attach to a standard rail
Answer:	The sight will directly attach to a picatinny rail. On a semi auto pistol that is not pre cut for the sight, you must purchase a dove tail mount. Attach the sight to the mount, remove rear sight and install into dove tail.

Product features

Venom Red Dot — 6 MOA Dot (VMD-3106)

Make your rifle, pistol, or shotgun even better with the Venom Red Dot sight. A 6 MOA dot promotes rapid target acquisition, while providing a precise point of aim—getting shots down range and on target fast.

The durable, machined aluminum housing ensures the unit will stand up to whatever you throw at it. High-quality, fully multi-coated lens offers a clean, wide field of view. Our top-load system makes changing the CR 1632 battery a snap and alleviates the need to remove the sight when switching the power source. The power and dot intensity controls are conveniently located on the left side of the unit. Flush 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze.

The Venom comes with a Picatinny mount—weighs 1.6 ounces with mount.

6 MOA Dot Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Choose between 10 levels of brightness in manual mode or switch to auto mode. Up to 150 hours of use at highest setting. Use at lower settings can allow up to 30,000 hours.

Windage and Elevation Adjustment

The Venom features adjustable elevation and windage dials with 1 MOA clicks. To adjust the elevation and windage settings, turn the dials up or down or left or right as indicated by the arrows.

Mounting the Venom

The Venom red dot is shipped from the factory with a low rail mount that clamps to a slotted spec base rail. In addition to the supplied low rail mount, an optional riser mount places the Venom red dot at correct height for rifles.

1. Attach the low rail mount to the Venom using the included screws.

2. Attach the Venom to the base rail, making sure the recoil lug is solidly seated in the base groove.

3. Check to see that the clamp is fully down and hooked around the outside of the base.

4. Press the Venom down and forward toward the muzzle and firmly tighten base clamp screw using large coin or flat blade screwdriver.

Product description

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Available in multiple reticle colors.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery.

User questions & answers

Question:	Will this fit on my AK with the mount that it comes with
Answer:	It is supposed to be BTR-2, but I received a simple 3 dot drop down instead.
Question:	What's the difference between this the 501 and the 505. Does this come with the Cantilever Mount
Answer:	Yes its included
Question:	What is the moa on this
Answer:	Yes, good for close and medium range
Question:	does this have the tall mount compatible to the AR or the short mount for rifles
Answer:	No

Product features

StrikeFire II Red/Green Dot Sight (SF-RG-501)

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

For handguns, shotguns, rifles and paintball guns, this Red dot sight has the power and construction to last through any shooting application. Features include Unlimited eye relief, a wide field of view and an 11 position rheostat for brightness control. Click windage and elevation adjustments.Features:- 2 x 42 mm- 2.5 MOA dot reticle designed for quick acquisition- shock resistant to 1000 grams - see-thru, Flip-up lens caps- optical-quality, all-weather, rheostat for brightness control - lightweight/easy to mount, multi-coated lenses produce more than 95 percent light transmittance - ideal for shotguns, handguns, rifles, muzzle loaders, paintball and crossbows, black finish - waterproof, fog-proof- Unlimited eye relief- wide field of view""

• Unlimited eye relief
• Wide field of view
• Flip-up lens caps / lanyard system
• Integrated Weaver-style mounting system
• Ideal for shotguns, handguns, rifles, muzzleloaders, airguns and crossbows

User questions & answers

Question:	Will this scope mount to my Colt AR picatinny rail
Answer:	I would get the 11. I ordered the 12 and had to return them because they were too big. I wear an 11-11.5 in boots, but a usually a 12 in tennis shoes.
Question:	Will this work with the utg med-pro compact riser mount, 0.83" high, 3 slots
Answer:	I got mine during the summer. I wouldn't say they are the coolest shoe but they are no hotter than a pair of leather high tops.
Question:	Which is it? a 2.5MOA or 5MOA? the description lists both. By the model number it should be
Answer:	I wear a size 13 and they fit pretty true. Being waterproof, they keep the wind off your feet pretty well. I took a longish ride last Oct and it was 29 degrees when started in the morning. My hands got cold long before my feet did, requiring coffee stops about every 45-60 minutes.
Question:	Would this work well on an SKS
Answer:	They are a heavy duty canvas type material, so yes if you're riding in dirt conditions it'll collect dirt/ mud. But the it's durable feeling and the toe areas are protected with a plastic cap inside it feels like. Very durable overall feeling, but not very skate shoe looking in person.

Product features

TRUGLO Red-Dot 2x42mm Sight

• 5 MOA reticle designed for quick acquisition.
• Unlimited eye relief
• Wide field of view
• Flip-up lens caps / lanyard system
• Lightweight / easy to mount

• INCLUDES: Holosun HS507K-X2 Red Dot Sight | Coin Battery CR1632 | Lens Cloth | User Manual | Warranty
• LONG BATTERY LIFE: Features include Holosun’s Super LED with up to 50k hours battery life. With an amazing battery life, you are guaranteed with an efficient operating sight. Perfect to carry along on long treks.
• ADVANCED TECHNOLOGY: There are 12 different brightness settings, including dim settings compatible with night-vision devices for nighttime use. Parallax free optical design, with unlimited eye relief
• SHAKE AWAKE: Holosun’s Shake Awake Technology shuts the LED off during periods of motionlessness. The amount of time it takes for the LED to deactivate (enter Sleep Mode) is user programmable.
• LOCK MODE: This optic offers a Lock Mode that prevents unintentional button presses while the optic is holstered and a side access battery tray, which allows the operator to change the battery without removing the optic from the firearm.
• Shake Awake can also be completely deactivated which keeps the optic powered on for up to 100k hours

User questions & answers

Question:	Does this have the same mounting footprint as the 507c or trijicon rmr
Answer:	No, the M18 is designed for the Sig Romeo1 Pro sight.
Question:	How much of the front sight can you co-witness and align with the rear sight through the optic? Or is it entirely hidden by the optic
Answer:	The Ruger plate you would need is 90723. This sight shares the Shield Sight pattern.
Question:	Will this fit a Sig M
Answer:	No. It is just a red dot sight
Question:	What adaptor plate is needed to install this on a Ruger57 handgun
Answer:	I would suggest calling the 1-800 number on the Vortex website or select the 'Contact Us' email option.

• Matte black featuring a 3 MOA Dot reticle with 11 brightness settings; Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders
• Waterproof construction: O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50
• Shockproof construction: Built to withstand bumps, bangs, drops and the rough and tumble environment of the field
• Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change

User questions & answers

Question:	Will this sight co-witness with magpul mbus blip-up backup sights
Answer:	Yes we have used ours many times. You just need this. https://www.amazon.com/gp/aw/d/B00YEEDJF6/ref=mp_s_a_1_1?ie=UTF8&qid=1490656143&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=boom+pole+holder&dpPl=1&dpID=41Rbc4HYQKL&ref=plSrch
Question:	how long is battery life
Answer:	They are just regular turtle based legs. They will have a bit of resistance when collapsed or when moved into their respective spots. I always just grab the inside leg and the outside and pull them in separate directions. They all should also have a notch in which they lock in place once opened all the way.
Question:	does this come with a mount riser
Answer:	No, this particular model does not.
Question:	I'm kind of on a tight budget I was either think of this or the UTG 4'' ITA red dot. What im wondering is if this one is worth getting
Answer:	Yes. We run Alien Bees and/or White Lightning with a 47" octabox. You will need sand bags just to be safe. If your concern is the 47" box with a 4' arm, remember the 47" box is a diameter measurement, you will only need half that to clear the holding arm.

Product features

Waterproof Construction and Nitrogen-Purged Fog-Proofing

Featuring nitrogen-purged fog-proofing, this red dot sight will not fog up due to humidity or rapid temperature changes, so you can always clearly see the red dot and your target. The optics are O-ring sealed and will stay dry even when fully immersed in water.

Adjustable Brightness for Better Target Acquisition

The TRS-25 has adjustable brightness settings from 1 to 11, illuminating the 3 MOA dot reticle inside to better help you with target acquisition. And by choosing lower brightness settings, you can prolong the red dot’s battery life.

Shockproof Construction for Maximum Durability

Built to withstand bumps, bangs, and drops, the TRS-25 comes in strong, precision-engineered housing and is perfectly suited for the rough-and-tumble environment of the field. You'll never have to worry about damaging this red dot sight.

Bushnell: The Industry Leader in High-Performance Sports Optics

Since 1948, our guiding principle has been to provide the highest-quality, most reliable and affordable sports optics on the market. Our award-winning products enhance the enjoyment of every outdoor pursuit and empower everyone to get out and experience their passion. Combining cutting-edge design and performance with a commitment to being accessible to all, Bushnell is the most recognized and reputable sports optics brand in the world.

• The Razor Red Dot Sight-3 MOA is designed to be mounted to a wide variety of firearms and used in various shooting applications. The Razor was designed so shooters have unlimited eye relief for easy target acquisition.
• A premium wide field lens gives the shooter an impressive field of view. The daylight bright red dot has nine illumination levels allowing shooters to find their ideal brightness setting and easily adjust if conditions change.
• Anti-reflective XR coatings on the lenses increase light transmission for maximum brightness while Armortek coatings protect the lenses from oil and scratches.
• O-ring sealed and a rugged one piece chasis constructed from aircraft grade aluminum ensure waterproof and shockproof performance.
• The Razor runs off a single CR2032 battery which can be easily switched in and out.

User questions & answers

Question:	Does this optic have a motion activated on feature like that of a Trijicon rmr or Sig Romeo
Answer:	You could wear goggles over this.
Question:	would this fit on the fnx tactical and handle the recoil of 45acp
Answer:	Yes the mouth piece portion will keep water out. The other portions intended to be under a helmet will not be waterproof.
Question:	does this scope have night vision capability
Answer:	It is made for warm weather. It does have a removable wind liner for chilly mornings.
Question:	Does this work with a weaver rail
Answer:	I don't know what sizes they come in. I have small-to-average-size hands, and my gloves are marked "XXL/12." They're not particularly large. They fit my hands nicely. They're very good gloves. Durable, too. I would recommend buying the largest size you can, and if they don't fit, return them for a different brand.
Question:	Will the tall riser block my mbus? i want to be able to still use my flip up sights
Answer:	There is only a zipper and Velcro down the side... nothing extra on the ankle. They are a great fit. Get the proper size, and they ain't coming off.. decent track shoes... a bit stiff
Question:	Firstly, does this also have the motion on feature? Discription does not say or i over looked while reading. Also, does this work with the ksg
Answer:	about a half size big but it works out nice because they are comfortable regardless and you can wear any size sox in them
Question:	Will this work on an AR
Answer:	Try size 8
Question:	Will this co-witness with some mbus pro flip up irons
Answer:	I have a hard time w shoe sizing, some shoes I wear 9.5 some 10, I ordered the 10's and they fit me perfect. I have a slightly wide foot if that helps any. I have heard others have a hard time sizing these but they seem spot on for me. They may loosen up over time though.I hope this will help some

Product features

Razor Red Dot — 3 MOA Dot (RZR-2001)

The high-end Razor is a reflex sight built for top-tier performance and incredible versatility. The highly polished glass is clear and crisp from edge to edge. Exceptional resolution and a wide field of view present a sight picture sure to impress. The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Fast and accurate, clear, compact, durable and dependable-the Razor red dot is a sight worthy of the Razor name. The Razor comes with a Picatinny mount-weighs 2.5 ounces with mount.

3 MOA Dot Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Nine levels of brightness settings can be used up to 150 hours of use at highest setting and at lower settings can allow up to 30,000 hours.

Windage and Elevation Adjustment

The Razor features adjustable elevation and windage dials with 1 MOA clicks.

To adjust the elevation and windage settings:

1. Loosen the Adjustment Lock Screw 1 1/2 turns.

2. Turn adjustment dials in the appropriate Up/Down or Left/Right direction as indicated by arrows.

3. Re-tighten lock screw after making adjustments.

Mounting the Razor

Included Picatinny Rail Mount

The Razor red dot is shipped from the factory with an installed low rail mount that clamps to a Picatinny spec base rail.

1. Attach the Razor to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove. Adjustment side of Razor should face the shooter.

2. Check to see that the clamp is fully down and hooked around the outside of the base.

3. Press the Razor down and forward toward the muzzle and, using the supplied hex wrench, firmly tighten down the clamp screw.

Additional Mounting Options

In addition to the supplied low Picatinny rail mount, other mounting base options are available for the Razor red dot. These include Weaver spec base rail clamps, custom handgun mounts, and riser mounts.

1. Remove the supplied Low Mount Clamp Base before mounting the Razor red dot to other bases.

2. Use the Mounting Shim (a custom adapter plate) when adapting the Razor to specialized red dot bases from other companies.

Product description

Designed to deliver advanced optic performance, the Sightmark Ultra Shot A-Spec Reflex Sight promises repeatable accuracy and ultra-fast target acquisition for recreational, professional and competition shooting environments. The Ultra Shot A-Spec’s premium wide-angle lens system with scratch resistant and anti-reflective red coating, 4 illuminated red reticle options with 10 brightness settings, parallax correction (beyond 10 yards) and unlimited eye relief deliver a crisp, robust field of view and uncompromising reliability, even when perfect sight alignment isn’t an option. Built tough, the Ultra Shot A-Spec Reflex Sight is shock proof, IP55 weather-resistant, recoil rated up to .50 BMG and constructed of a rugged, lightweight 6061-T6 aluminum hood and protective shield. 1 MOA windage and elevation adjustments, up to 120 MOA of travel, get you on target quickly while the Interlock internal locking adjustment system and a single CR123A battery keeps you there with a battery life of 200 – 2,000 hours. The Ultra Shot A-Spec Reflex Sight also features a low battery indicator, digital switch controls, 1-hour auto shut-off, quick-detach picatinny mount and Sightmark’s lifetime warranty. The Ultra Shot A-Spec Reflex Sight is also perfectly compatible with the Sightmark XT-3 Tactical Magnifier (SM19062). Includes adjustment tools, CR123A battery, operation manual and neoprene cover.

• XT-3 Magnifier compatible
• Advanced anti-reflective coated, scratch resistant lens system
• Night vision brightness modes and 4 red reticle options with 10 brightness settings
• Quick detach mount for easy on/off application
• Auto-off capabilities

User questions & answers

Question:	The Sightmark site states that parallax is set at 10 yards. Have you noticed any parallax over 10 yards
Answer:	I haven't had a chance to test one yet, but from what I understand this generation of Sightmark reflex have great parallax correction beyond. I'll post an update once I have get one out to the range. - Jared @ Coconut Camp
Question:	Is this reflex sight have motion detector
Answer:	No. It has an auto-off feature, but no auto-on.
Question:	fit a G2c with a mount
Answer:	it will attach to anything with a picatinny rail, but I would not recommend putting it on a G2c.
Question:	Is the lens can shatter from airsoft BBs
Answer:	Will the lens shatter if shot by a bb? Not unless you consistently get in the lens. It would also depend on how far away and many other factors, but probably not.

Product features

Sightmark Ultra Shot A-Spec Reflex Sight

promises repeatable accuracy and ultra-fast target acquisition for recreational, professional and competition shooting environments. The premium wide-angle lens system with scratch resistant/anti-reflective red coating, 4 illuminated red reticle options, parallax correction (beyond 10 yards) and unlimited eye relief deliver a crisp, robust field of view and uncompromising reliability.

Built tough, the Ultra Shot A-Spec Reflex Sight is shock proof, IP55 weather-resistant, recoil rated up to .50 BMG and constructed of a rugged, lightweight 6061-T6 aluminum hood and protective shield. 1 MOA windage and elevation adjustments, up to 120 MOA of travel, get you on target quickly while the Interlock internal locking adjustment system and a single CR123A battery keeps you there with a battery life of 200 – 2,000 hours. The Ultra Shot A-Spec Reflex Sight also features a low battery indicator, digital switch controls, 1-hour auto shut-off, and quick-detach picatinny mount.

Longer Battery Life

Powered by a single CR123A battery, the A-Spec re.flex sight has the ability to run up to 2,000 hours

Flush QD Mount

The new quick detach mount for the R-Spec and A-Spec is designed with a low profile. Now the handle sits nearly flush with the main housing. The low profile design eliminates snags on vests or other equipment. With this design, the handle remains set in the open position due to the flat cut near the handle’s axis of rotation. This small improvement keeps the handle stable and not loose potentially marking the finish. Finally, the handle is made of steel noted by it’s different finish. Steel is more durable and less prone to breaking.

InterlokTM Adjustment System

The interlok adjustment system is a internal retention system that ensure windage and elevation adjustments remain zeroed during recoil. Competitor reflex sights typically require the adjustment system be unlocked using a screw or set of lock screws. These designs can be damaged or break if the customer forgets to loosen the locking screw. The interlok adjustment system removes the need of a locking screw so shooters can make adjustments on the fly.

Low Battery Indication

- 2 Hour low battery indication – each press of a button the reticle will blink four times.

- 10 Minute low battery indication – the reticle will continuously blink until a new battery is installed.

Night Vision/Low Light Mode

Features:

- Dims reticle for use with night vision devices

Benefits

- Allows optic to be used at night effectively as NV riflescope.

- Diminishes revealing signature in dark environments.

4 Different Reticle Options

Choose between four reticle options to allow for a custom and personalized shooting experience.

Product description

If you want a high-quality red dot sight but don’t want to break the bank, the StrikeFire II is a great choice. The sleek, rear-facing controls allow for easy adjustment of its ten dot intensity levels; the lowest two settings are night-vision compatible. It features a 30mm aluminum alloy chassis, extra-high recoil rating, and is waterproof and fogproof for ultimate reliability.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions.
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary.

User questions & answers

Question:	Will this fit on a h&r single shot rifle
Answer:	It fits a Picatinny rail. You can likely install one if your firearm doesn't already have one.
Question:	What is the expected battery life on this
Answer:	Sorry for jumping in here late, but just wanted to add that John was 100% correct on his answer. If the brightness is set too high for the ambient light conditions, you can get a "starburst" effect. We recommend running red dot sights at the lowest brightness setting that you can still clearly see the dot (the exact setting will depend on ambient light)
Question:	How easy will it be to see a man sized target at 300m
Answer:	That shouldn't happen. Best is to contact them, I believe they will replace faulty red dot sights. The laser and red dot are independent from each other. If you push the Red Dot button it should turn on. & When you turn off you have to press it for like 5 seconds. Just contact the company.
Question:	HOW CLEAR ARE THE RED AND GREEN DOTS
Answer:	I have a magpul flip up rear and iron on the barrel. My red dot sight is mounted just in front of of the flip rear. My reticle when sighted hovers just above my front iron sight but I can see my magpul rear through the optic if need be. Hope this helps. I love this optic on my AR

Product features

StrikeFire II Red Dot (SF-RG-501) & Hat

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

The DeltaPoint Pro is proof that you don’t have to compromise performance, even on a small sight. And now it supports modern nv devices with brightness settings that fine tune the red dot to match the sensitivity of your equipment. Its incredibly wide field-of-view and crystal-clear glass dominates the competition, while its rugged aluminum housing and steel sheath ensure it will perform in the harshest conditions. Ease-of-use was also a focus when designing this elite red dot sight, which is why we put an easy access battery compartment on top and gave it click-adjustments for more precision. And this isn’t just a pistol sight either; the DP Pro is just as at home on gun, and pretty much anything else that goes bang.

• Model #119688 - DeltaPoint Pro with 2.5 MOA Dot reticle and Matte finish
• Battery saving Motion Sensor Technology - Automatically deactivates illumination after 5 minutes of inactivity yet reacts instantly when movement is detected.
• DiamondCoat Aspheric Lens increases the usable field of view by up to 56% and provides a scratch resistant crystal clear image.
• Tool-less top loading battery access and true 1 MOA click adjustments provide unparalleled ease of use.
• Rugged 100% waterproof construction makes it equally at home in hunting or tactical environments.

User questions & answers

Question:	Will this mount on my glock G40mos
Answer:	I would be sure it's a 2 screw riser. I'm not familiar with the one you mentioned. But I've seen this scope mounted. It's long enough ot really needs a 2 screw riser.
Question:	Does this come with the co-witness rear sight as shown in the picture
Answer:	I have this from eBay. Non magnified dot is 5 MOA and the 2x power Version of These it's dot is 2.5 MOA. It says it Right in the manual which comes in the box. So the magnified Version is 2.5 MOA. Parallax for the magnified one is at 50 Yards. At 50 meters I have zeroed mine and rested it shoots were I aim with an handgun (357 mag revolver). Field of View is limited drastically by the magnification (2x power versions) so you get About 20mm FoV instead the 40mm claimed (it's like Looking down a pipe). Glasses are so-so Quality and dot is way on the dimm side (only usefull Setting is the highest unless you live on the North pole were it's allways dark). But it works and will do the Job for Hunting up to 100 Yards or so).
Question:	Will this mount on a s&w m&p 9l pro core
Answer:	I am not sure what This is? If it is a Red dot. then yes it would work fine an an SKS as long as you have a mount for it. They really need to tie this to the product so I know what I am answering.
Question:	Which moa should i use for my glock 40 mos (hunting/plinking) and which for my glock 34 (competition)? thanks
Answer:	i use it for snowmobiling so there is alot of other equipment there to keep it in place. There is no draw string. I would not buy this product again because its too big and when it gets wet it falls down off your face. junk if you ask me

Product features

Leupold Delta Point

The DeltaPoint Pro is proof that you don’t have to compromise performance, even on a small sight. Its incredibly wide field-of-view and crystal-clear glass dominates the competition, while its rugged aluminum housing and steel sheath ensure it will perform in the harshest conditions. Ease-of-use was also a focus when designing this elite red dot sight, which is why we put an easy access battery compartment on top and gave it click-adjustments for more precision.

Twighlight Red Dot Light Management System

See more in less light with Twilight Red Dot System thanks to premium lens clarity and standard color consistency.

Designed, Machined, & Assembled in the USA

We design, build, and test our products with a single-minded focus: to make sure they'll perform.

No matter where you take us, on the battlefield, competition, or on the hunt, we won't let you down.

So Be bold. Be tenacious. Be relentless.